Aging suppression in Multistrip Multigap Resistive Plate Chambers for high counting rate experiments
Authors:
M. Petris,
V. Aprodu,
D. Bartos,
D. Dorobantu,
V. Duta,
M. Petrovici,
A. Radu
Abstract:
A long term operation of Multi-Strip Multi-Gap Resistive Plate Chambers (MSMGRPC) with gas mixtures based on C2H2F4 and SF6 leads to aging effects, observed as depositions on the surface of the resistive electrodes. Moreover, enhanced depositions and higher noise rates were evidenced around the nylon spacers used for defining the gas gaps between the resistive electrodes. The aging effects are ref…
▽ More
A long term operation of Multi-Strip Multi-Gap Resistive Plate Chambers (MSMGRPC) with gas mixtures based on C2H2F4 and SF6 leads to aging effects, observed as depositions on the surface of the resistive electrodes. Moreover, enhanced depositions and higher noise rates were evidenced around the nylon spacers used for defining the gas gaps between the resistive electrodes. The aging effects are reflected in an increase of the dark current and dark counting rate, with negative impact on the long term performance of the chamber and data volume in a free running readout mode operation. MSMGRPC prototypes designed with a direct gas flow through the gas gaps and minimization of the number of spacers in the active area were developed as mitigation solution. Prototypes with this new design and different granularities were assembled using fishing line as spacers and investigated for aging effects. Although a significant reduction in the dark current and dark counting rate was evidenced, dark counting rate localized around the fishing line spacers remains. In this paper, a new generation of direct flow chambers based on discrete spacers is presented. The results of their aging investigations show that, even at lower gas flows, the aging effects become negligible.
△ Less
Submitted 21 March, 2024;
originally announced March 2024.
The upgrade of the ALICE TPC with GEMs and continuous readout
Authors:
J. Adolfsson,
M. Ahmed,
S. Aiola,
J. Alme,
T. Alt,
W. Amend,
F. Anastasopoulos,
C. Andrei,
M. Angelsmark,
V. Anguelov,
A. Anjam,
H. Appelshäuser,
V. Aprodu,
O. Arnold,
M. Arslandok,
D. Baitinger,
M. Ball,
G. G. Barnaföldi,
E. Bartsch,
P. Becht,
R. Bellwied,
A. Berdnikova,
M. Berger,
N. Bialas,
P. Bialas
, et al. (210 additional authors not shown)
Abstract:
The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous re…
▽ More
The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous readout electronics based on the SAMPA chip, an ALICE development, are replacing the previous elements. The construction of these new elements, together with their associated quality control procedures, is explained in detail. Finally, the readout chamber and front-end electronics cards replacement, together with the commissioning of the detector prior to installation in the experimental cavern, are presented. After a nine-year period of R&D, construction, and assembly, the upgrade of the TPC was completed in 2020.
△ Less
Submitted 25 March, 2021; v1 submitted 17 December, 2020;
originally announced December 2020.
