Removal and Recovery of Ammonia from Wastewater using Ti$_3$C$_2$T$_x$ MXenes in Flow Electrode Capacitive Deionization
Authors:
Naqsh E Mansoor,
Luis A. Diaz,
Christopher E. Shuck,
Yury Gogotsi,
Tedd E. Lister,
David Estrada
Abstract:
Flowing electrode capacitive deionization systems (FE-CDI) have recently garnered attention because of their ability to prevent cross contamination and operate in uninterrupted cycles ad infinitum. Typically, FE-CDI electrodes suffer from low conductivity, reducing deionization performance. Utilization of higher mass loadings to combat this leads to poor rheological properties. Herein, Ti$_3$C…
▽ More
Flowing electrode capacitive deionization systems (FE-CDI) have recently garnered attention because of their ability to prevent cross contamination and operate in uninterrupted cycles ad infinitum. Typically, FE-CDI electrodes suffer from low conductivity, reducing deionization performance. Utilization of higher mass loadings to combat this leads to poor rheological properties. Herein, Ti$_3$C$_2$T$_x$ MXene was introduced as 1 mg/mL slurry electrodes in an FE-CDI system for the removal and recovery of ammonia from simulated agricultural wastewater. The electrode performance was evaluated by operating the FE-CDI system with a feed solution of 500 mg/L NH$_4$Cl running in batch mode at a constant voltage of 1.20 V and -1.20 V in charging and discharging modes, respectively. Despite the low loading, Ti$_3$C$_2$T$_x$ flowing electrodes showed markedly improved performance, achieving 60% ion removal efficiency in a saturation time of 115 minutes with an adsorption capacity of 460 mg/g. To understand the high adsorption performance of the electrodes, physiochemical and structural analysis was done via a variety of characterization techniques such as SEM, TEM, XRD, DLS, and Raman Spectroscopy. Cyclic Voltammetry and Galvanostatic charge/discharge profiles were obtained to evaluate the electrochemical properties of the electrodes. The system proved to be an energy-saving technology by exhibiting a charge efficiency of 58-70% while operating at an energy consumption of 0.45 kWh/kg. A 92% regeneration efficiency showed that the electrodes were stable and suitable for long term and scalable usage. The results demonstrate that MXenes have the potential to improve the FE-CDI process for energy-efficient removal and recovery of ammonia.
△ Less
Submitted 21 July, 2022; v1 submitted 6 July, 2020;
originally announced July 2020.
Open-source automated chemical vapor deposition system for the production of two - dimensional nanomaterials
Authors:
Lizandra Williams- Godwin,
Dale Brown,
Richard Livingston,
Tyler Webb,
Lynn Karriem,
Elton Graugnard,
David Estrada
Abstract:
The study of two- dimensional (2D) materials is a rapidly growing area within nanomaterial research. However, the high equipment costs, which include the processing systems necessary for creating these materials, can be a barrier to entry for some researchers interested in studying these novel materials. Such process systems include those used for chemical vapor deposition. This article presents t…
▽ More
The study of two- dimensional (2D) materials is a rapidly growing area within nanomaterial research. However, the high equipment costs, which include the processing systems necessary for creating these materials, can be a barrier to entry for some researchers interested in studying these novel materials. Such process systems include those used for chemical vapor deposition. This article presents the first open-source design for an automated chemical vapor deposition system that can be built for less than a third of the cost for a similar commercial system. Our design can be easily customized and expanded on, depending upon the needs of the user. With a process chamber built as described, we demonstrate that a variety of 2D nanomaterials and their heterostructures can be grown via chemical vapor deposition. Specifically, our experimental results demonstrate the capability of this open-source design in producing high quality, 2D nanomaterials such as graphene and tungsten disulfide, which are at the forefront of research in emerging semiconductor devices, sensors, and energy storage applications.
△ Less
Submitted 2 July, 2018;
originally announced July 2018.
