-
Demonstration and STEM Analysis of Ferroelectric Switching in MOCVD-Grown Single Crystalline Al$_{0.85}$Sc$_{0.15}$N
Authors:
Niklas Wolff,
Georg Schoenweger,
Isabel Streicher,
Md Redwanul Islam,
Nils Braun,
Patrik Stranak,
Lutz Kirste,
Mario Prescher,
Andriy Lotnyk,
Hermann Kohlstedt,
Stefano Leone,
Lorenz Kienle,
Simon Fichtner
Abstract:
Wurtzite-type Al$_{1-x}$Sc$_x$N solid solutions grown by metal organic chemical vapour deposition are for the first time confirmed to be ferroelectric. The film with 230 nm thickness and x = 0.15 exhibits a coercive field of 5.5 MV/cm at a measurement frequency of 1.5 kHz. Single crystal quality and homogeneous chemical composition of the film was confirmed by X-ray diffraction spectroscopic metho…
▽ More
Wurtzite-type Al$_{1-x}$Sc$_x$N solid solutions grown by metal organic chemical vapour deposition are for the first time confirmed to be ferroelectric. The film with 230 nm thickness and x = 0.15 exhibits a coercive field of 5.5 MV/cm at a measurement frequency of 1.5 kHz. Single crystal quality and homogeneous chemical composition of the film was confirmed by X-ray diffraction spectroscopic methods such as time of flight secondary ion mass spectrometry. Annular bright field scanning transmission electron microscopy served to proof the ferroelectric polarization inversion on unit cell level. The single crystal quality further allowed to image the large-scale domain pattern of a wurtzite-type ferroelectric for the first time, revealing a predominantly cone-like domain shape along the c-axis of the material. As in previous work, this again implies the presence of strong polarization discontinuities along this crystallographic axis, which could be suitable for current transport. The domains are separated by narrow domain walls, for which an upper thickness limit of 3 nm was deduced, but which could potentially be atomically sharp. We are confident that these results will advance the commencing integration of wurtzite-type ferroelectrics to GaN as well as generally III-N based heterostructures and devices.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
The Interplay Between Imprint, Wake-Up Like Effects and Domains in Ferroelectric AlScN
Authors:
Maike Gremmel,
Simon Fichtner
Abstract:
This paper investigates wake-up and imprint in ferroelectric AlScN films. The study employs a series of I-V and P-E measurements with varying electric field amplitudes and voltage cycles as well as structural investigation via Scanning Electron Microscopy to understand the origin and underlying principle of wake-up and imprint as well as their relation. It is shown that the material can be conside…
▽ More
This paper investigates wake-up and imprint in ferroelectric AlScN films. The study employs a series of I-V and P-E measurements with varying electric field amplitudes and voltage cycles as well as structural investigation via Scanning Electron Microscopy to understand the origin and underlying principle of wake-up and imprint as well as their relation. It is shown that the material can be considered wake-up free, however inherent imprint and imprint shift in combination with minor loops result in a wake-up like effect. We introduce a proposition to explain the influence of initial switching cycles on domains, their stabilization and corresponding changes in imprint. Unipolar fields and temperature investigations are used to explore the reversibility of imprint and ways to program it, while partial switching is applied to investigate domain propagation and support the aforementioned approach. It is concluded, that after an energetically more demanding domain nucleation, domain wall motion can switch the majority of polarization in Al1-xScxN. As a consequence, the presence of initial domains reduces the coercive field in respect to unipolar films.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
In-Grain Ferroelectric Switching in Sub-5 nm Thin AlScN Films at 1 V
Authors:
Georg Schönweger,
Niklas Wolff,
Md Redwanul Islam,
Maike Gremmel,
Adrian Petraru,
Lorenz Kienle,
Hermann Kohlstedt,
Simon Fichtner
Abstract:
Analog switching in ferroelectric devices promises neuromorphic computing with highest energy efficiency, if limited device scalability can be overcome. To contribute to a solution, we report on the ferroelectric switching characteristics of sub-5 nm thin Al$_{0.74}$Sc$_{0.26}$N films grown on Pt/Ti/SiO2/Si and epitaxial Pt/GaN/sapphire templates by sputter-deposition. In this context, we focus on…
▽ More
Analog switching in ferroelectric devices promises neuromorphic computing with highest energy efficiency, if limited device scalability can be overcome. To contribute to a solution, we report on the ferroelectric switching characteristics of sub-5 nm thin Al$_{0.74}$Sc$_{0.26}$N films grown on Pt/Ti/SiO2/Si and epitaxial Pt/GaN/sapphire templates by sputter-deposition. In this context, we focus on the following major achievements compared to previously available wurtzite-type ferroelectrics: 1) Record low switching voltages down to 1 V are achieved, which is in a range that can be supplied by standard on-chip voltage sources. 2) Compared to the previously investigated deposition of thinnest Al$_{1-x}$Sc$_x$N films on epitaxial templates, a significantly larger coercive field to breakdown field ratio is observed for Al$_{0.74}$Sc$_{0.26}$N films grown on silicon substrates, the technologically most relevant substrate-type. 3) The formation of true ferroelectric domains in wurtzite-type materials is for the first time demonstrated on the atomic scale by scanning transmission electron microscopy investigations of a sub-5 nm thin partially switched film. The direct observation of inversion domain boundaries within single nm-sized grains supports the theory of a gradual domain-wall motion limited switching process in wurtzite-type ferroelectrics. Ultimately, this should enable the analog switching necessary for mimicking neuromorphic concepts also in highly scaled devices.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
Ultrathin AlScN for low-voltage driven ferroelectric-based devices
Authors:
Georg Schönweger,
Md Redwanul Islam,
Niklas Wolff,
Adrian Petraru,
Lorenz Kienle,
Hermann Kohlstedt,
Simon Fichtner
Abstract:
Thickness scaling of ferroelectricity in AlScN is a determining factor for its potential application in neuromorphic computing and memory devices. In this letter, we report on ultrathin (10 nm) Al0.72Sc0.28N films that are ferroelectrically switchable at room temperature. All-epitaxial Al0.72Sc0.28N/Pt heterostructures are grown by magnetron sputtering onto GaN/sapphire substrates followed by an i…
▽ More
Thickness scaling of ferroelectricity in AlScN is a determining factor for its potential application in neuromorphic computing and memory devices. In this letter, we report on ultrathin (10 nm) Al0.72Sc0.28N films that are ferroelectrically switchable at room temperature. All-epitaxial Al0.72Sc0.28N/Pt heterostructures are grown by magnetron sputtering onto GaN/sapphire substrates followed by an in situ Pt capping approach to avoid oxidation of the Al0.72Sc0.28N film surface. Structural characterization by X-ray diffraction and transmission electron microscopy reveals the established epitaxy. The thus obtained high-quality interfaces in combination with the in situ capping is expected to facilitate ferroelectric switching of AlScN in the ultrathin regime. The analysis of the relative permittivity and coercive field dependence on the Al0.72Sc0.28N film thicknesses in the range of 100 nm down to 10 nm indicates only moderate scaling effects, suggesting that the critical thickness for ferroelectricity is not yet approached. Furthermore, the deposited layer stack demonstrates the possibility of including ultrathin ferroelectric AlScN into all-epitaxial GaN-based devices using sputter deposition techniques. Thus, our work highlights the integration and scaling potential of all-epitaxial ultrathin AlScN offering high storage density paired with low voltage operation desired for state of the art ferroelectric memory devices.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
