-
Invisible sweat sensor: ultrathin membrane mimics skin for stress monitoring
Authors:
Yuchen Feng,
Andreas Kenny Oktavius,
Reno Adley Prawoto,
Hing Ni Ko,
Qiao Gu,
Ping Gao
Abstract:
Epidermal skin sensors have emerged as a promising approach for continuous and noninvasive monitoring of vital health signals, but to maximize their performance, these sensors must integrate seamlessly with the skin, minimizing impedance while maintaining the skin's natural protective and regulatory functions.In this study, we introduce an imperceptible sweat sensor that achieves this seamless ski…
▽ More
Epidermal skin sensors have emerged as a promising approach for continuous and noninvasive monitoring of vital health signals, but to maximize their performance, these sensors must integrate seamlessly with the skin, minimizing impedance while maintaining the skin's natural protective and regulatory functions.In this study, we introduce an imperceptible sweat sensor that achieves this seamless skin integration through interpenetrating networks formed by a porous, ultra-thin, ultra-high molecular weight polyethylene (UHMWPE) nanomembrane. Upon attachment to the skin by van der Waals force, the amphiphilic sweat extrudates infuse into the interconnected nanopores inside the hydrophobic UHWMPE nanomembrane, forming "pseudo skin" nanochannels for continuous sweat perspiration. This integration is further enhanced by the osmotic pressure generated during water evaporation. Leveraging the efficient transport of biomarkers through the "skin" channels within the porous membrane, we developed an organic electrochemical transducer (OECT) cortisol sensor via in-situ synthesis of a molecularly imprinted polymer (MIP) and poly(3,4 ethylenedioxythiophene) (PEDOT) within the nanomembrane. This demonstrates the capability to detect cortisol concentrations from 0.05 to 0.5 μM for seamless monitoring of stress levels. This work represents a significant advancement in self-adhesive sweat sensors that offer imperceptible and real-time non-invasive health monitoring capabilities.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Q-BiC: A biocompatible integrated chip for in vitro and in vivo spin-based quantum sensing
Authors:
Louise Shanahan,
Sophia Belser,
Jack W. Hart,
Qiushi Gu,
Julien R. E. Roth,
Annika Mechnich,
Michael Hoegen,
Soham Pal,
David Jordan,
Eric A. Miska,
Mete Atature,
Helena S. Knowles
Abstract:
Optically addressable spin-based quantum sensors enable nanoscale measurements of temperature, magnetic field, pH, and other physical properties of a system. Advancing the sensors beyond proof-of-principle demonstrations in living cells and multicellular organisms towards reliable, damage-free quantum sensing poses three distinct technical challenges. First, spin-based quantum sensing requires opt…
▽ More
Optically addressable spin-based quantum sensors enable nanoscale measurements of temperature, magnetic field, pH, and other physical properties of a system. Advancing the sensors beyond proof-of-principle demonstrations in living cells and multicellular organisms towards reliable, damage-free quantum sensing poses three distinct technical challenges. First, spin-based quantum sensing requires optical accessibility and microwave delivery. Second, any microelectronics must be biocompatible and designed for imaging living specimens. Third, efficient microwave delivery and temperature control are essential to reduce unwanted heating and to maintain an optimal biological environment. Here, we present the Quantum Biosensing Chip (Q-BiC), which facilitates microfluidic-compatible microwave delivery and includes on-chip temperature control. We demonstrate the use of Q-BiC in conjunction with nanodiamonds containing nitrogen vacancy centers to perform optically detected magnetic resonance in living systems. We quantify the biocompatibility of microwave excitation required for optically detected magnetic resonance both in vitro in HeLa cells and in vivo in the nematode Caenorhabditis elegans for temperature measurements and determine the microwave-exposure range allowed before detrimental effects are observed. In addition, we show that nanoscale quantum thermometry can be performed in immobilised but non-anaesthetised adult nematodes with minimal stress. These results enable the use of spin-based quantum sensors without damaging the biological system under study, facilitating the investigation of the local thermodynamic and viscoelastic properties of intracellular processes.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Flexible multi-bunch-length operation for continuous-wave x-ray free-electron lasers
Authors:
Zihan Zhu,
Jiawei Yan,
Hanxiang Yang,
Duan Gu,
Bart Faatz,
Haixiao Deng,
Qiang Gu
Abstract:
The X-ray free-electron lasers (XFELs) are cutting-edge instruments pivotal in a broad range of fields, providing high-power X-ray pulses with durations spanning from femtoseconds to attoseconds. One of the critical challenges in XFEL facilities is the simultaneous accommodation of diverse requirements for XFEL operation modes and photon properties across different undulator lines. This paper prop…
▽ More
The X-ray free-electron lasers (XFELs) are cutting-edge instruments pivotal in a broad range of fields, providing high-power X-ray pulses with durations spanning from femtoseconds to attoseconds. One of the critical challenges in XFEL facilities is the simultaneous accommodation of diverse requirements for XFEL operation modes and photon properties across different undulator lines. This paper proposes a dipole-kicker combination in the bunch compressors to vary the electron bunch length for the continuous-wave XFEL facilities driven by a superconducting linac. This method enables optimization of the electron bunch length on a per-bunch basis, tailored to each specific needs of each undulator. Through start-to-end simulations based on the parameters of the Shanghai high-repetition-rate XFEL and extreme light facility, we demonstrate the feasibility of this technique. The results show its effectiveness in enabling simultaneous operations of self-amplified spontaneous emission and externally seeded FEL across different undulator lines, ensuring optimal electron bunch compression for each undulator line.
△ Less
Submitted 30 April, 2024;
originally announced May 2024.
-
Spin control with triplet and doublet excitons in organic semiconductors
Authors:
Qinying Gu,
Sebastian Gorgon,
Alexander S. Romanov,
Feng Li,
Richard H. Frienda,
Emrys Evansd
Abstract:
Spin triplet exciton formation sets limits on technologies using organic semiconductors that are confined to singlet-triplet photophysics. In contrast, excitations in the spin doublet manifold in organic radical semiconductors can show efficient luminescence. Here we explore the dynamics of the spin allowed process of intermolecular energy transfer from triplet to doublet excitons. We employ a car…
▽ More
Spin triplet exciton formation sets limits on technologies using organic semiconductors that are confined to singlet-triplet photophysics. In contrast, excitations in the spin doublet manifold in organic radical semiconductors can show efficient luminescence. Here we explore the dynamics of the spin allowed process of intermolecular energy transfer from triplet to doublet excitons. We employ a carbene-metal-amide (CMA-CF3) as a model triplet donor host, since following photoexcitation it undergoes extremely fast intersystem crossing to set up a population of triplet excitons within 4 ps. This enables a foundational study for tracking energy transfer from triplets to a model radical semiconductor, TTM-3PCz. Over 90% of all radical luminescence originates from the triplet channel in this system under photoexcitation. We find that intermolecular triplet-to-doublet energy transfer can occur directly and rapidly, with 12% of triplet excitons transferring already on sub-ns timescales. This enhanced triplet harvesting mechanism is utilised in efficient near-infrared organic light-emitting diodes, which can be extended to other opto-electronic and -spintronic technologies by radical-based spin control in molecular semiconductors.
△ Less
Submitted 16 December, 2023;
originally announced December 2023.
-
Coupler RF kick and emittance optimization of the SHINE injector
Authors:
Junjie Guo,
Duan Gu,
Zenggong Jiang,
Zhen Wang,
Meng Zhang,
Qiang Gu,
Haixiao Deng
Abstract:
Coupler RF kick due to the asymmetric structure caused by the coupler, is more likely to lead to emittance growth in the SHINE injector with low beam energy. The calculation of coupler RF kick and resulting emittance dilution has been studied in detail in the literature. In this paper, a novel approach is provided that a lossy material is placed on the surface of the superconducting cavity to appr…
▽ More
Coupler RF kick due to the asymmetric structure caused by the coupler, is more likely to lead to emittance growth in the SHINE injector with low beam energy. The calculation of coupler RF kick and resulting emittance dilution has been studied in detail in the literature. In this paper, a novel approach is provided that a lossy material is placed on the surface of the superconducting cavity to approximate the Q0 of the TESLA cavity, and a frequency solver of CST is used to simulate the electromagnetic field distribution, which is used to calculate coupler RF kick, and calibrated against the results of CST Particle Tracking Studio with a good agreement. In order to minimize the emittance growth of SHINE injector, a 1.3 GHz symmetric twin-coupler cavity is adoped in the single-cavity cryomodule, and the rotational angle and permutation of the 8 cavities in the 8-cavities cryomodule is optimized. Ultimately, the optimized emittance is lower than the design parameter.
△ Less
Submitted 7 December, 2023;
originally announced December 2023.
-
Photochemical Upcycling of Ultrastrong Polyethylene Nanomembranes into Fibrous Carbon at Ambient Conditions
Authors:
Yuexiang Sun,
Xin Ma,
Qiao Gu,
Ping Gao
Abstract:
The escalating global issue of plastic waste accumulation, specifically polyolefins, necessitates an urgent solution for upcycling these materials into beneficial compounds. Yet, achieving such upcycling without introducing carbon dioxide into the environment remains a formidable challenge. In this study, we demonstrate an eco-friendly approach for the photochemical conversion of ultrastrong, ultr…
▽ More
The escalating global issue of plastic waste accumulation, specifically polyolefins, necessitates an urgent solution for upcycling these materials into beneficial compounds. Yet, achieving such upcycling without introducing carbon dioxide into the environment remains a formidable challenge. In this study, we demonstrate an eco-friendly approach for the photochemical conversion of ultrastrong, ultratransparent, and ultrathin polyethylene membrane into fibrous carbon nanomembrane at ambient conditions. The membrane was sputter-coated with platinum and cuprous oxide nanoparticles and exposed to simulated sunlight, resulting in a porous carbon membrane decorated with Pt nanoparticles. The new carbonized nanomembrane maintained the pristine membrane's morphology. The membrane exhibited high activity (2.11 mA/cm2) for electrochemical ethanol oxidation with stability over 1000 cycles. This work holds significance for sustainable plastic waste management and the design of new polyolefin materials in a circular economy.
△ Less
Submitted 13 January, 2024; v1 submitted 12 November, 2023;
originally announced November 2023.
-
DeePTB: A deep learning-based tight-binding approach with $ab$ $initio$ accuracy
Authors:
Qiangqiang Gu,
Zhanghao Zhouyin,
Shishir Kumar Pandey,
Peng Zhang,
Linfeng Zhang,
Weinan E
Abstract:
Simulating electronic behavior in materials and devices with realistic large system sizes remains a formidable task within the $ab$ $initio$ framework. We propose DeePTB, an efficient deep learning-based tight-binding (TB) approach with $ab$ $initio$ accuracy to address this issue. By training with $ab$ $initio$ eigenvalues, our method can efficiently predict TB Hamiltonians for unseen structures.…
▽ More
Simulating electronic behavior in materials and devices with realistic large system sizes remains a formidable task within the $ab$ $initio$ framework. We propose DeePTB, an efficient deep learning-based tight-binding (TB) approach with $ab$ $initio$ accuracy to address this issue. By training with $ab$ $initio$ eigenvalues, our method can efficiently predict TB Hamiltonians for unseen structures. This capability facilitates efficient simulation of large-size systems under external perturbations like strain, which are vital for semiconductor band gap engineering. Moreover, DeePTB, combined with molecular dynamics, can be used to perform efficient and accurate finite temperature simulations of both atomic and electronic behavior simultaneously. This is demonstrated by computing the temperature-dependent properties of a GaP system with $10^6$ atoms.
△ Less
Submitted 11 July, 2023; v1 submitted 10 July, 2023;
originally announced July 2023.
-
Simultaneous nanorheometry and nanothermometry using intracellular diamond quantum sensors
Authors:
Qiushi Gu,
Louise Shanahan,
Jack W. Hart,
Sophia Belser,
Noah Shofer,
Mete Atature,
Helena S. Knowles
Abstract:
Viscoelasticity of the cytoplasm plays a critical role in cell morphology and division. In parallel, local temperature is coupled to viscoelasticity and influences cellular bioenergetics. Probing the interdependence of intracellular temperature and viscoelasticity provides an exciting opportunity for the study of metabolism and disease progression. Here, we present a dual-mode quantum sensor, capa…
▽ More
Viscoelasticity of the cytoplasm plays a critical role in cell morphology and division. In parallel, local temperature is coupled to viscoelasticity and influences cellular bioenergetics. Probing the interdependence of intracellular temperature and viscoelasticity provides an exciting opportunity for the study of metabolism and disease progression. Here, we present a dual-mode quantum sensor, capable of performing simultaneous nanoscale thermometry and rheometry in a dynamic cellular environment. Our technique uses nitrogen-vacancy centres in nanodiamond, combining sub-diffraction resolution single-particle tracking in a fluidic environment with optically detected magnetic resonance spectroscopy. We demonstrate nanoscale sensing of temperature-dependent viscoelasticity in complex media. We then use our sensor to investigate the interplay between intracellular forces and cytoplasmic rheology in live cells, revealing details of active trafficking and nanoscale viscoelasticity.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
Topological Microlaser with A non-Hermitian Topological Bulk
Authors:
Zhitong Li,
Xi-Wang Luo,
Dayang Lin,
Abouzar Gharajeh,
Jiyoung Moon,
Junpeng Hou,
Chuanwei Zhang,
Qing Gu
Abstract:
Bulk-edge correspondence, with quantized bulk topology leading to protected edge states, is a hallmark of topological states of matter and has been experimentally observed in electronic, atomic, photonic, and many other systems. While bulk-edge correspondence has been extensively studied in Hermitian systems, a non-Hermitian bulk could drastically modify the Hermitian topological band theory due t…
▽ More
Bulk-edge correspondence, with quantized bulk topology leading to protected edge states, is a hallmark of topological states of matter and has been experimentally observed in electronic, atomic, photonic, and many other systems. While bulk-edge correspondence has been extensively studied in Hermitian systems, a non-Hermitian bulk could drastically modify the Hermitian topological band theory due to the interplay between non-Hermiticity and topology; and its effect on bulk-edge correspondence is still an ongoing pursuit. Importantly, including non-Hermicity can significantly expand the horizon of topological states of matter and lead to a plethora of unique properties and device applications, an example of which is a topological laser. However, the bulk topology, and thereby the bulk-edge correspondence, in existing topological edge-mode lasers is not well defined. Here, we propose and experimentally probe topological edge-mode lasing with a well-defined non-Hermitian bulk topology in a one-dimensional (1D) array of coupled ring resonators. By modeling the Hamiltonian with an additional degree of freedom (referred to as synthetic dimension), our 1D structure is equivalent to a 2D non-Hermitian Chern insulator with precise mapping. Our work may open a new pathway for probing non-Hermitian topological effects and exploring non-Hermitian topological device applications.
△ Less
Submitted 28 February, 2023;
originally announced March 2023.
-
Inhibition of Current-spike Formation Based on Longitudinal Phase Space Manipulation for High-Repetition-Rate X-ray FEL
Authors:
Zihan Zhu,
Duan Gu,
Jiawei Yan,
Zhen Wang,
Hanxiang Yang,
Meng Zhang,
Haixiao Deng,
Qiang Gu
Abstract:
The formation of a double-horn current profile is a challenging issue in the achievement of electron bunch with high peak current, especially for high-repetition-rate X-ray free-electron lasers (XFELs) where more nonlinear and intricate beam dynamics propagation is involved. Here, we propose to correct the nonlinear beam longitudinal phase space distortion in the photoinjector section with a dual-…
▽ More
The formation of a double-horn current profile is a challenging issue in the achievement of electron bunch with high peak current, especially for high-repetition-rate X-ray free-electron lasers (XFELs) where more nonlinear and intricate beam dynamics propagation is involved. Here, we propose to correct the nonlinear beam longitudinal phase space distortion in the photoinjector section with a dual-mode buncher. In combination with the evolutionary many-objective beam dynamics optimization, this method is shown to be effective in manipulating the longitudinal phase space at the injector exit. Furthermore, the formation of the current spike is avoided after the multi-stage charge density modulation and electron bunch with a peak current of 1.6 kA is achieved for 100-pC bunch charge.Start-to-end simulations based on the Shanghai high-repetition-rate XFEL and extreme light facility demonstrate that the proposed scheme can increase the FEL pulse energy by more than 3 times in a cascading operation of echo-enabled harmonic generation and high-gain harmonic generation. Moreover, this method can also be used for longitudinal phase space shaping of electron beams operating at a high repetition rate to meet the specific demands of different researches.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
A synchrotron-based kilowatt-level radiation source for EUV lithograph
Authors:
Bocheng Jiang,
Chao Feng,
Changliang Li,
Zhenghe Bai,
Weishi Wan,
Dao Xiang,
Qiang Gu,
Kun Wang,
Qinglei Zhang,
Dazhang Huang,
Senyu Chen
Abstract:
A compact damping ring with limited circumference of about 160 m is proposed for producing kilowatt-level coherent EUV radiation. The electron bunch in the ring is modulated by a 257nm wavelength laser with the help of the angular dispersion induced micro-bunching method [C. Feng and Z. Zhao, Sci. Rep. 7, 4724 (2017)]. Coherent radiation at 13.5 nm with an average power of about 2.5 kW can be achi…
▽ More
A compact damping ring with limited circumference of about 160 m is proposed for producing kilowatt-level coherent EUV radiation. The electron bunch in the ring is modulated by a 257nm wavelength laser with the help of the angular dispersion induced micro-bunching method [C. Feng and Z. Zhao, Sci. Rep. 7, 4724 (2017)]. Coherent radiation at 13.5 nm with an average power of about 2.5 kW can be achieved with the state-of-the-art accelerator and laser technologies.
△ Less
Submitted 17 October, 2021;
originally announced October 2021.
-
Singlet and triplet to doublet energy transfer: improving organic light-emitting diodes with radicals
Authors:
Emrys W. Evans,
Alexander J. Gillett,
Qinying Gu,
Junshuai Ding,
Zhangwu Chen,
Timothy J. H. Hele,
Richard H. Friend,
Feng Li
Abstract:
Organic light-emitting diodes (OLEDs) must be engineered to circumvent the efficiency limit imposed by the 3:1 ratio of triplet to singlet exciton formation following electron-hole capture. Here we show the spin nature of luminescent radicals such as TTM-3PCz allows direct energy harvesting from both singlet and triplet excitons through energy transfer, with subsequent rapid and efficient light em…
▽ More
Organic light-emitting diodes (OLEDs) must be engineered to circumvent the efficiency limit imposed by the 3:1 ratio of triplet to singlet exciton formation following electron-hole capture. Here we show the spin nature of luminescent radicals such as TTM-3PCz allows direct energy harvesting from both singlet and triplet excitons through energy transfer, with subsequent rapid and efficient light emission from the doublet excitons. This is demonstrated with a model Thermally-Activated Delayed Fluorescence (TADF) organic semiconductor, 4CzIPN, where reverse intersystem crossing from triplets is characteristically slow (50% emission by 1 microsecond). The radical:TADF combination shows much faster emission via the doublet channel (80% emission by 100 ns) than the comparable TADF-only system, and sustains higher electroluminescent efficiency with increasing current density than a radical-only device. By unlocking energy transfer channels between singlet, triplet and doublet excitons, further technology opportunities are enabled for optoelectronics using organic radicals.
△ Less
Submitted 28 September, 2021;
originally announced September 2021.
-
Observation of high efficiency Betatron radiation from femtosecond petawatt laser irradiated near critical plasmas
Authors:
J. H. Tan,
Y. F. Li,
D. Z. Li,
J. Feng,
Y. J. Li,
W. J. Zhou,
Y. H. Yan,
Z. M. Zhang,
B. L. Zhang,
J. G. Wang,
Y. Q. Gu,
Y. T. Li,
L. M. Chen
Abstract:
We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and em…
▽ More
We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and emit x-rays when oscillating in the laser field. The deduced energy conversion efficiency from laser to x-rays is up to 1e-4, orders of magnitude higher than other betatron regimes. Enhancement of acceleration and radiation with sharp plasma density boundary is also obtained and further interpretated with 2D particle-in-cell simulations.
△ Less
Submitted 25 September, 2021;
originally announced September 2021.
-
Many-Objective Beam Dynamics Optimization for High-Repetition-Rate XFEL Photoinjector
Authors:
Zihan Zhu,
Jiawei Yan,
Duan Gu,
Qiang Gu
Abstract:
SHINE, as the first hard x-ray free-electron-laser (FEL) facility in China, is designed to provide high-brightness FEL lasing under high-repetition-rate operation mode. In order to drive x-ray FEL pulses with high qualities, the photoinjector section is deployed to provide the specified electron beam with low transverse emittance and high brightness. Normally the multi-objective optimization algor…
▽ More
SHINE, as the first hard x-ray free-electron-laser (FEL) facility in China, is designed to provide high-brightness FEL lasing under high-repetition-rate operation mode. In order to drive x-ray FEL pulses with high qualities, the photoinjector section is deployed to provide the specified electron beam with low transverse emittance and high brightness. Normally the multi-objective optimization algorithm is employed in the injector beam dynamics design. In this paper, the many-objective optimization algorithm NSGA-III is introduced to the injector physical design for optimizing the 4 beam quality properties for the first time. The results of the optimization are presented and analyzed. The application of NSGA-III can provide guidance for further physical research as well as improve the beam dynamics optimization efficiency.
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
Preferential imbibition in a dual-permeability pore network
Authors:
Qingqing Gu,
Haihu Liu,
Lei Wu
Abstract:
A deep understanding of two-phase displacement in porous media with permeability contrast is essential for the design and optimisation of enhanced oil recovery processes. In this paper, we investigate the forced imbibition behaviour in two dual-permeability geometries that are of equal permeability contrast. First, a mathematical model is developed for the imbibition in a pore doublet, which shows…
▽ More
A deep understanding of two-phase displacement in porous media with permeability contrast is essential for the design and optimisation of enhanced oil recovery processes. In this paper, we investigate the forced imbibition behaviour in two dual-permeability geometries that are of equal permeability contrast. First, a mathematical model is developed for the imbibition in a pore doublet, which shows that the imbibition dynamics can be fully described by the viscosity ratio $λ$ and capillary number $Ca_m$ which creatively incorporates the influence of channel width and length. Through the finite difference solution of the mathematical model, a $λ-Ca_m$ phase diagram is established to characterise the imbibition preference in the pore doublet. We then investigate the imbibition process in a dual-permeability pore network using a well-established lattice Boltzmann method, focusing on the competition between the viscous and capillary forces. Like in the pore doublet, the preferential imbibition occurs in high permeability zone at high $Ca_{m}$ but in low permeability zone at low $Ca_{m}$. When $Ca_m$ is not sufficiently high, an oblique advancing pattern is observed which is attributed to non-trivial interfacial tension. Thanks to the newly defined capillary number, the critical $Ca_{m}$ curve on which the breakthrough simultaneously occurs in both permeability zones, is found to match perfectly with that from the pore doublet and it is the optimal condition for maximising the imbibition efficiency in the entire pore network.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
-
Self-Amplification of Coherent Energy Modulation in Seeded Free-Electron Lasers
Authors:
Jiawei Yan,
Zhangfeng Gao,
Zheng Qi,
Kaiqing Zhang,
Kaishang Zhou,
Tao Liu,
Si Chen,
Chao Feng,
Chunlei Li,
Lie Feng,
Taihe Lan,
Wenyan Zhang,
Xingtao Wang,
Xuan Li,
Zenggong Jiang,
Baoliang Wang,
Zhen Wang,
Duan Gu,
Meng Zhang,
Haixiao Deng,
Qiang Gu,
Yongbin Leng,
Lixin Yin,
Bo Liu,
Dong Wang
, et al. (1 additional authors not shown)
Abstract:
The spectroscopic techniques for time-resolved fine analysis of matter require coherent X-ray radiation with femtosecond duration and high average brightness. Seeded free-electron lasers (FELs), which use the frequency up-conversion of an external seed laser to improve temporal coherence, are ideal for providing fully coherent soft X-ray pulses. However, it is difficult to operate seeded FELs at a…
▽ More
The spectroscopic techniques for time-resolved fine analysis of matter require coherent X-ray radiation with femtosecond duration and high average brightness. Seeded free-electron lasers (FELs), which use the frequency up-conversion of an external seed laser to improve temporal coherence, are ideal for providing fully coherent soft X-ray pulses. However, it is difficult to operate seeded FELs at a high repetition rate due to the limitations of present state-of-the-art laser systems. Here, we report the novel self-modulation method for enhancing laser-induced energy modulation, thereby significantly reducing the requirement of an external laser system. Driven by this scheme, we experimentally realize high harmonic generation in a seeded FEL using an unprecedentedly small energy modulation. An electron beam with a laser-induced energy modulation as small as 1.8 times the slice energy spread is used for lasing at the 7th harmonic of a 266-nm seed laser in a single-stage high-gain harmonic generation (HGHG) setup and the 30th harmonic of the seed laser in a two-stage HGHG setup. The results mark a major step towards a high-repetition-rate, fully coherent X-ray FEL.
△ Less
Submitted 11 February, 2021; v1 submitted 2 November, 2020;
originally announced November 2020.
-
arXiv:2010.03888
[pdf]
cond-mat.mes-hall
cond-mat.mtrl-sci
physics.app-ph
physics.chem-ph
quant-ph
How Does the Symmetry of S1 Influence Exciton Transport in Conjugated Polymers?
Authors:
Raj Pandya,
Antonios M. Alvertis,
Qifei Gu,
Jooyoung Sung,
Laurent Legrand,
David Kréher,
Thierry Barisien,
Alex W. Chin,
Christoph Schnedermann,
Akshay Rao
Abstract:
Many optoelectronic devices based on organic materials require rapid and long-range singlet exciton transport. Key factors that control the transport of singlet excitons includes the electronic structure of the material, disorder and exciton-phonon coupling. An important parameter whose influence on exciton transport has not been explored is the symmetry of the singlet electronic state (S1). Here,…
▽ More
Many optoelectronic devices based on organic materials require rapid and long-range singlet exciton transport. Key factors that control the transport of singlet excitons includes the electronic structure of the material, disorder and exciton-phonon coupling. An important parameter whose influence on exciton transport has not been explored is the symmetry of the singlet electronic state (S1). Here, we employ femtosecond transient absorption spectroscopy and microscopy to reveal the relationship between the symmetry of S1 and exciton transport in highly aligned, near-disorder free, one-dimensional conjugated polymers based on polydiacetylene.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
Bright perovskite light-emitting electrochemical cell utilizing CNT sheets as a tunable charge injector
Authors:
Masoud Alahbakhshi,
Alexios Papadimitratos,
Ross Haroldson,
Aditya Mishra,
Arthur Ishteev,
Josef Velten,
Qing Gu,
Jason D. Slinker,
Anvar Zakhidov
Abstract:
Organic-inorganic perovskite light-emitting devices have recently emerged as a reliable light source. Here, we developed a Single Layer Perovskite Light-Emitting Electrochemical Cells (SL-PeLEC) with laminated free-standing Carbon Nanotube Sheet (CNT) sheets as an effective charge electron injecting cathode electrode. The structure consists of bottom ITO-on-glass as a transparent electrode, the co…
▽ More
Organic-inorganic perovskite light-emitting devices have recently emerged as a reliable light source. Here, we developed a Single Layer Perovskite Light-Emitting Electrochemical Cells (SL-PeLEC) with laminated free-standing Carbon Nanotube Sheet (CNT) sheets as an effective charge electron injecting cathode electrode. The structure consists of bottom ITO-on-glass as a transparent electrode, the composite of CsPbBr3:PEO:LiPF6 with additive ionic salt as an emitting layer (EML) and 5 layers of CNT aerogel sheets as a top laminated cathode . Utilizing CNT free standing sheets laminated right on top of perovskite thin film in this simple single layer configuration has multiple benefits. Such CNT top cathode does not show any chemical degradation by reaction with halogens from perovskite, which is detrimental for metallic cathodes. Moreover, the formation of an internal p-i-n junction in perovskite EML composite layer by ionic migration under applied voltage bias and electric double layer (EDL) formation at each electrode interface is beneficially effecting CNT sheets by Li+ ionic doping and raises their Fermi level, further enhancing electron injection. Besides, inspired by successes of ionic additives in LECs and electrochemical doping of perovskite with alkali metals, we leveraged a lithium salt, LiPF6, within a CsPbBr3:PEO composite matrix to achieve optimal ionic redistribution and doping effects in this SL-PeLEC. Although initially CNT electrode has slightly high sheet resistance, the SL-PeLEC device has a low turn-on voltage of 2.6v and a maximum luminance intensity of 530 cd/m2, confirming the n-doping increased conductivity. This work provides a unique route toward flexible and bright perovskite LECs with stable and transparent CNT electrodes that can have injection efficiency tuned by poling induced ionic EDL-doping
△ Less
Submitted 12 August, 2020;
originally announced August 2020.
-
Sequentially Deposited versus Conventional Nonfullerene Organic Solar Cells: Interfacial Trap States, Vertical Stratification, and Exciton Dissociation
Authors:
Jiangbin Zhang,
Moritz H. Futscher,
Vincent Lami,
Felix U. Kosasih,
Changsoon Cho,
Qinying Gu,
Aditya Sadhanala,
Andrew J. Pearson,
Bin Kan,
Giorgio Divitini,
Xiangjian Wan,
Daniel Credgington,
Neil C. Greenham,
Yongsheng Chen,
Caterina Ducati,
Bruno Ehrler,
Yana Vaynzof,
Richard H. Friend,
Artem A. Bakulin
Abstract:
Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, cri…
▽ More
Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, critical for exciton dissociation and device performance, are largely unexplored. Herein, steady-state and time-resolved optical and electrical techniques are employed to characterize the interfacial trap states. Correlation with the luminescent efficiency of interfacial states and its non-radiative recombination, interfacial trap states are characterized to be about 50% more populated in the sq-BHJ than as-cast BHJ (c-BHJ), which probably limits the device voltage output. Cross-sectional energy-dispersive X-ray spectroscopy and ultraviolet photoemission spectroscopy depth profiling directly vizualize the donor-acceptor vertical stratification with a precision of 1-2 nm. From the proposed "needle" model, the high exciton dissociation efficiency is rationalized. Our study highlights the promise of sequential deposition to fabricate efficient solar cells, and points towards improving the voltage output and overall device performance via eliminating interfacial trap states.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Bright and Color-Tunable Single Layer Perovskite Host-Ionic Guest Light Emitting Electrochemical Cells
Authors:
Aditya Mishra,
Stephen DiLuzio,
Masoud Alahbakhshi,
Austen Adams,
Melanie H. Bowler,
Qing Gu,
Anvar A. Zakhidov,
Stefan Bernhard,
Jason D. Slinker
Abstract:
Perovskite light emitting devices have drawn considerable attention for their favorable optoelectronic properties. High carrier mobilities make perovskites excellent candidates as host materials in electroluminescent devices. To achieve high performance in a simple single layer device, we employed a CsPbBr3 perovskite host and a novel ionic iridium complex guest along with a polyelectrolyte to dem…
▽ More
Perovskite light emitting devices have drawn considerable attention for their favorable optoelectronic properties. High carrier mobilities make perovskites excellent candidates as host materials in electroluminescent devices. To achieve high performance in a simple single layer device, we employed a CsPbBr3 perovskite host and a novel ionic iridium complex guest along with a polyelectrolyte to demonstrate efficient light emitting electrochemical cells (PeLECs). For an optimal guest/host blend, 10600 cd/m2 luminance at 11.6 cd/A and 9.04 Lm/W are achieved at 4.1 V. These devices showed voltage-dependent electroluminescence color proceeding from orange-red to green, facilitated by the reconfigurable ionic materials blend. Optimized devices exhibited stable operation under constant current driving, maintaining >630 cd/m2 emission for 40 h. Our rationally-designed ionic guest at an optimal concentration of the host produced efficient (>90%) Forster energy transfer and improved thin film morphological for high performance PeLEC operation enabled by ionic migration to interfaces
△ Less
Submitted 23 July, 2020;
originally announced July 2020.
-
Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector
Authors:
Daya Bay,
JUNO collaborations,
:,
A. Abusleme,
T. Adam,
S. Ahmad,
S. Aiello,
M. Akram,
N. Ali,
F. P. An,
G. P. An,
Q. An,
G. Andronico,
N. Anfimov,
V. Antonelli,
T. Antoshkina,
B. Asavapibhop,
J. P. A. M. de André,
A. Babic,
A. B. Balantekin,
W. Baldini,
M. Baldoncini,
H. R. Band,
A. Barresi,
E. Baussan
, et al. (642 additional authors not shown)
Abstract:
To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were…
▽ More
To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Search For Electron-Antineutrinos Associated With Gravitational-Wave Events GW150914, GW151012, GW151226, GW170104, GW170608, GW170814, and GW170817 at Daya Bay
Authors:
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
G. F. Cao,
J. Cao,
J. F. Chang,
Y. Chang,
H. S. Chen,
S. M. Chen,
Y. Chen,
Y. X. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
J. P. Cummings,
O. Dalager,
F. S. Deng,
Y. Y. Ding,
M. V. Diwan,
T. Dohnal,
J. Dove,
M. Dvorak
, et al. (161 additional authors not shown)
Abstract:
Providing a possible connection between neutrino emission and gravitational-wave (GW) bursts is important to our understanding of the physical processes that occur when black holes or neutron stars merge. In the Daya Bay experiment, using data collected from December 2011 to August 2017, a search has been performed for electron-antineutrino signals coinciding with detected GW events, including GW1…
▽ More
Providing a possible connection between neutrino emission and gravitational-wave (GW) bursts is important to our understanding of the physical processes that occur when black holes or neutron stars merge. In the Daya Bay experiment, using data collected from December 2011 to August 2017, a search has been performed for electron-antineutrino signals coinciding with detected GW events, including GW150914, GW151012, GW151226, GW170104, GW170608, GW170814, and GW170817. We used three time windows of $\mathrm{\pm 10~s}$, $\mathrm{\pm 500~s}$, and $\mathrm{\pm 1000~s}$ relative to the occurrence of the GW events, and a neutrino energy range of 1.8 to 100 MeV to search for correlated neutrino candidates. The detected electron-antineutrino candidates are consistent with the expected background rates for all the three time windows. Assuming monochromatic spectra, we found upper limits (90% confidence level) on electron-antineutrino fluence of $(1.13~-~2.44) \times 10^{11}~\rm{cm^{-2}}$ at 5 MeV to $8.0 \times 10^{7}~\rm{cm^{-2}}$ at 100 MeV for the three time windows. Under the assumption of a Fermi-Dirac spectrum, the upper limits were found to be $(5.4~-~7.0)\times 10^{9}~\rm{cm^{-2}}$ for the three time windows.
△ Less
Submitted 14 September, 2020; v1 submitted 27 June, 2020;
originally announced June 2020.
-
Deep learning for thermal plasma simulation: solving 1-D arc model as an example
Authors:
Linlin Zhong,
Qi Gu,
Bingyu Wu
Abstract:
Numerical modelling is an essential approach to understanding the behavior of thermal plasmas in various industrial applications. We propose a deep learning method for solving the partial differential equations in thermal plasma models. In this method a deep feed-forward neural network is constructed to surrogate the solution of the model. A loss function is designed to measure the discrepancy bet…
▽ More
Numerical modelling is an essential approach to understanding the behavior of thermal plasmas in various industrial applications. We propose a deep learning method for solving the partial differential equations in thermal plasma models. In this method a deep feed-forward neural network is constructed to surrogate the solution of the model. A loss function is designed to measure the discrepancy between the neural network and the equations describing thermal plasmas. A good neural network is obtained by minimizing this loss function. We demonstrate the power of this deep learning method by solving a 1-D arc decaying model which is consist of three cases: stationary arc, transient arc without considering radial velocity, and transient arc with radial velocity respectively. The results show that the deep neural networks have excellent ability to express the differential equations describing thermal plasmas. This could bring us a new and prospective numerical tool for thermal plasma modelling.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
arXiv:2002.12465
[pdf]
physics.chem-ph
cond-mat.mes-hall
cond-mat.mtrl-sci
physics.optics
quant-ph
Optical projection and spatial separation of spin entangled triplet-pairs from the S1 (21Ag-) state of pi-conjugated systems
Authors:
Raj Pandya,
Qifei Gu,
Alexandre Cheminal,
Richard Y. S. Chen,
Edward P. Booker,
Richard Soucek,
Michel Schott,
Laurent Legrand,
Fabrice Mathevet,
Neil C. Greenham,
Thierry Barisien,
Andrew J. Musser,
Alex W. Chin,
Akshay Rao
Abstract:
The S1 (21Ag-) state is an optically dark state of natural and synthetic pi-conjugated materials that can play a critical role in optoelectronic processes such as, energy harvesting, photoprotection and singlet fission. Despite this widespread importance, direct experimental characterisations of the electronic structure of the S1 (21Ag-) wavefunction have remained scarce and uncertain, although ad…
▽ More
The S1 (21Ag-) state is an optically dark state of natural and synthetic pi-conjugated materials that can play a critical role in optoelectronic processes such as, energy harvesting, photoprotection and singlet fission. Despite this widespread importance, direct experimental characterisations of the electronic structure of the S1 (21Ag-) wavefunction have remained scarce and uncertain, although advanced theory predicts it to have a rich multi-excitonic character. Here, studying an archetypal polymer, polydiacetylene, and carotenoids, we experimentally demonstrate that S1 (21Ag-) is a superposition state with strong contributions from spin-entangled pairs of triplet excitons (1(TT)). We further show that optical manipulation of the S1 (21Ag-) wavefunction using triplet absorption transitions allows selective projection of the 1(TT) component into a manifold of spatially separated triplet-pairs with lifetimes enhanced by up to one order of magnitude and whose yield is strongly dependent on the level of inter-chromophore coupling. Our results provide a unified picture of 21Ag-states in pi-conjugated materials and open new routes to exploit their dynamics in singlet fission, photobiology and for the generation of entangled (spin-1) particles for molecular quantum technologies.
△ Less
Submitted 6 January, 2021; v1 submitted 27 February, 2020;
originally announced February 2020.
-
Active Perovskite Hyperbolic Metasurface
Authors:
Zhitong Li,
Joseph S. T. Smalley,
Ross Haroldson,
Dayang Lin,
Roberta Hawkins,
Abouzar Gharajeh,
Jiyoung Moon,
Junpeng Hou,
Chuanwei Zhang,
Walter Hu,
Anvar Zakhidov,
Qing Gu
Abstract:
A special class of anisotropic media, hyperbolic metamaterials and metasurfaces (HMMs), has attracted much attention in recent years due to its unique abilities to manipulate and engineer electromagnetic waves on the subwavelength scale. Because all HMM designs require metal dielectric composites, the unavoidable metal loss at optical frequencies inspired the development of active HMMs, where gain…
▽ More
A special class of anisotropic media, hyperbolic metamaterials and metasurfaces (HMMs), has attracted much attention in recent years due to its unique abilities to manipulate and engineer electromagnetic waves on the subwavelength scale. Because all HMM designs require metal dielectric composites, the unavoidable metal loss at optical frequencies inspired the development of active HMMs, where gain materials is incorporated to compensate the metal loss. Here, we experimentally demonstrate an active type II HMM that operates at vacuum wavelength near 750 nm on a silicon platform. Different from previous active HMMs operating below 1 μm, the dielectric constituent in our HMM is solely composed of gain medium, by utilizing solution processed and widely tunable metal halide perovskite gain. Thanks to the facile fabrication, tunability and silicon compatibility of our active HMM, this work paves the way towards HMM's integration into on chip components, and eventually, into photonic integrated circuits.
△ Less
Submitted 10 February, 2020;
originally announced February 2020.
-
Enhanced Operational Stability of Perovskite Light-Emitting Electrochemical Cells Leveraging Ionic Additives
Authors:
Aditya Mishra,
Masoud Alahbakhshi,
Ross Haroldson,
Lyndon D. Bastatas,
Qing Gu,
Anvar A. Zakhidov,
Jason D. Slinker
Abstract:
Hybrid perovskites are emerging as highly efficient materials for optoelectronic applications, however, the operational lifetime has remained a limiting factor for the continued progress of perovskite light emitting devices such as light emitting diodes (LEDs) and perovskite light emitting electrochemical cells (PeLECs). In this work, PeLECs utilizing an optimized fraction of LiPF6 salt additive e…
▽ More
Hybrid perovskites are emerging as highly efficient materials for optoelectronic applications, however, the operational lifetime has remained a limiting factor for the continued progress of perovskite light emitting devices such as light emitting diodes (LEDs) and perovskite light emitting electrochemical cells (PeLECs). In this work, PeLECs utilizing an optimized fraction of LiPF6 salt additive exhibit enhanced stability. At 0.5 wt% LiPF6, devices exhibit 100 h operation at high brightness in excess of 800 cd/m2 under constant current driving, achieving a maximum luminance of 3260 cd/m2 and power efficiency of 9.1 Lm/W. This performance extrapolates to a 6700 h luminance half-life from 100 cd/m2, a 5.6-fold improvement over devices with no lithium salt additive. Analysis under constant voltage driving reveals three current regimes, with lithium addition strongly enhancing current in the second and third regimes. The third regime correlates degradation of luminance with decreased current. These losses are mitigated by LiPF6 addition, an effect postulated to arise from preservation of perovskite structure. To further understand lithium salt addition, electrochemical impedance spectroscopy with equivalent circuit modeling is performed. Electrical double layer widths from ionic redistribution are minimized at 0.5wt% LiPF6 and inversely correlate with efficient performance.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
Environmentally Stable Room Temperature Continuous Wave Lasing in Defect-passivated Perovskite
Authors:
Jiyoung Moon,
Masoud Alahbakhshi,
Abouzar Gharajeh,
Sunah Kwon,
Ross Haroldson,
Zhitong Li,
Roberta Hawkins,
Moon J Kim,
Walter Hu,
Anvar Zakhidov,
Qing Gu
Abstract:
Metal halide perovskites have emerged as promising gain materials for on-chip lasers in photonic integrated circuits (PICs). However, stable continuous wave (CW) lasing behavior under optical pumping at room temperature - a prerequisite for electrically pumped lasing - has not yet been demonstrated. To achieve stable CW operation, we introduce a multiplex of strategies that include morphological,…
▽ More
Metal halide perovskites have emerged as promising gain materials for on-chip lasers in photonic integrated circuits (PICs). However, stable continuous wave (CW) lasing behavior under optical pumping at room temperature - a prerequisite for electrically pumped lasing - has not yet been demonstrated. To achieve stable CW operation, we introduce a multiplex of strategies that include morphological, structural and interfacial engineering of CH3NH3PbBr3 (MAPbBr3) thin films to improve perovskite's intrinsic stability, as well as high quality cavity design to reduce the operational power. We demonstrate for the first time, over 90-minute-long green CW lasing with 9.4W/cm2 threshold from a polycarbonate (PC)-defect-passivated, directly patterned MAPbBr3 two-dimensional photonic crystal (PhC) cavity without any substrate cooling. We also show our approach's effectiveness on the performance of MAPbBr3 under electrical excitation: we observe a seven-fold current efficiency enhancement by applying our strategies to a MAPbBr3 LED. This work paves the way to the realization of electrically pumped lasing in perovskites.
△ Less
Submitted 24 September, 2019; v1 submitted 22 September, 2019;
originally announced September 2019.
-
Bright and Efficient Perovskite Light Emitting Electrochemical Cells Leveraging Ionic Additives
Authors:
Masoud Alahbakhshi,
Aditya Mishra,
Ross Haroldson,
Arthur Ishteev,
Jiyoung Moon,
Qing Gu,
Jason D. Slinker,
Anvar A. Zakhidov
Abstract:
Perovskite light-emitting diodes (PeLEDs) have drawn considerable attention for their favorable optoelectronic properties. Perovskite light-emitting electrochemical cells (PeLECs) _ devices that utilize mobile ions _ have recently been reported but have yet to reach the performance of the best PeLEDs. We leveraged a poly(ethylene oxide) electrolyte and lithium dopant in CsPbBr3 thin films to produ…
▽ More
Perovskite light-emitting diodes (PeLEDs) have drawn considerable attention for their favorable optoelectronic properties. Perovskite light-emitting electrochemical cells (PeLECs) _ devices that utilize mobile ions _ have recently been reported but have yet to reach the performance of the best PeLEDs. We leveraged a poly(ethylene oxide) electrolyte and lithium dopant in CsPbBr3 thin films to produce PeLECs of improved brightness and efficiency. In particular, we found that a single layer PeLEC from CsPbBr3:PEO:LiPF6 with 0.5% wt. LiPF6 produced highly efficient (22 cd/A) and bright (~15000 cd/m2) electroluminescence. To understand this improved performance among PeLECs, we characterized these perovskite thin films with photoluminescence (PL) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). These studies revealed that this optimal LiPF6 concentration improves electrical double layer formation, reduces the occurrence of voids, charge traps, and pinholes, and increases grain size and packing density.
△ Less
Submitted 7 September, 2019;
originally announced September 2019.
-
Ultrafast long-range energy transport via light-matter coupling in organic semiconductor films
Authors:
Raj Pandya,
Richard Y. S. Chen,
Qifei Gu,
Jooyoung Sung,
Christoph Schnedermann,
Oluwafemi S. Ojambati,
Rohit Chikkaraddy,
Jeffrey Gorman,
Gianni Jacucci,
Olimpia D. Onelli,
Tom Willhammar,
Duncan N. Johnstone,
Sean M. Collins,
Paul A. Midgley,
Florian Auras,
Tomi Baikie,
Rahul Jayaprakash,
Fabrice Mathevet,
Richard Soucek,
Matthew Du,
Silvia Vignolini,
David G Lidzey,
Jeremy J. Baumberg,
Richard H. Friend,
Thierry Barisien
, et al. (7 additional authors not shown)
Abstract:
The formation of exciton-polaritons allows the transport of energy over hundreds of nanometres at velocities up to 10^6 m s^-1 in organic semiconductors films in the absence of external cavity structures.
The formation of exciton-polaritons allows the transport of energy over hundreds of nanometres at velocities up to 10^6 m s^-1 in organic semiconductors films in the absence of external cavity structures.
△ Less
Submitted 7 September, 2019;
originally announced September 2019.
-
Superconducting single-layer T-graphene and novel synthesis routes
Authors:
Qinyan Gu,
Dingyu Xing,
Jian Sun
Abstract:
Single-layer superconductors are ideal materials for fabricating superconducting nano devices. However, up to date, very few single-layer elemental superconductors have been predicted and especially no one has been successfully synthesized yet. Here, using crystal structure search techniques and ab initio calculations, we predict that a single-layer planar carbon sheet with 4- and 8-membered rings…
▽ More
Single-layer superconductors are ideal materials for fabricating superconducting nano devices. However, up to date, very few single-layer elemental superconductors have been predicted and especially no one has been successfully synthesized yet. Here, using crystal structure search techniques and ab initio calculations, we predict that a single-layer planar carbon sheet with 4- and 8-membered rings called T-graphene is a new intrinsic elemental superconductor with superconducting critical temperature (Tc) up to around 20.8 K. More importantly, we propose a synthesis route to obtain such a single-layer T-graphene, that is, a T-graphene potassium intercalation compound (C4K with P4/mmm symmetry) is firstly synthesized at high pressure (>11.5GPa) and then quenched to ambient condition; and finally, the single-layer T-graphene can be either exfoliated using the electrochemical method from the bulk C4K, or peeled off from bulk T-graphite C4, where C4 can be obtained from C4K by evaporating the K atoms. Interestingly, we find that the calculated Tc of C4K is about 30.4K at 0GPa, which sets a new record for layered carbon-based superconductors. The present findings add a new class of carbon based superconductors. In particular, once the single-layer T-graphene is synthesized, it can pave the way for fabricating superconducting devices together with other 2D materials using the layer-by-layer growth techniques.
△ Less
Submitted 4 August, 2019;
originally announced August 2019.
-
Bound-State Band Reconstruction and Resonance in Spin-1/2 Bose Gas with 1D Spin-Orbit Coupling
Authors:
Qi Gu,
Yuncheng Xiong,
Lan Yin
Abstract:
In this work, we study two-body bound states in two-component Bose gas with a one-dimensional (1D) spin-orbit coupling (SOC) induced by Raman lasers. The finite Raman coupling strength generates coupling among three spin channels, resulting in the reconstruction of three bound-state bands. In addition, multiple resonances can be induced at finite scattering lengths. By tuning the interaction in on…
▽ More
In this work, we study two-body bound states in two-component Bose gas with a one-dimensional (1D) spin-orbit coupling (SOC) induced by Raman lasers. The finite Raman coupling strength generates coupling among three spin channels, resulting in the reconstruction of three bound-state bands. In addition, multiple resonances can be induced at finite scattering lengths. By tuning the interaction in one intra-species channel, one bound-state band can be lifted and three resonances can be achieved at different center-of-mass momenta, which can be observable under current experimental conditions in ${}^{87}$Rb atoms.
△ Less
Submitted 10 May, 2019;
originally announced May 2019.
-
Extraction of the $^{235}$U and $^{239}$Pu Antineutrino Spectra at Daya Bay
Authors:
Daya Bay collaboration,
D. Adey,
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
J. F. Chang,
Y. Chang,
H. S. Chen,
S. M. Chen,
Y. Chen,
Y. X. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
A. Chukanov,
J. P. Cummings,
N. Dash,
F. S. Deng,
Y. Y. Ding
, et al. (171 additional authors not shown)
Abstract:
This Letter reports the first extraction of individual antineutrino spectra from $^{235}$U and $^{239}$Pu fission and an improved measurement of the prompt energy spectrum of reactor antineutrinos at Daya Bay. The analysis uses $3.5\times 10^6$ inverse beta-decay candidates in four near antineutrino detectors in 1958 days. The individual antineutrino spectra of the two dominant isotopes, $^{235}$U…
▽ More
This Letter reports the first extraction of individual antineutrino spectra from $^{235}$U and $^{239}$Pu fission and an improved measurement of the prompt energy spectrum of reactor antineutrinos at Daya Bay. The analysis uses $3.5\times 10^6$ inverse beta-decay candidates in four near antineutrino detectors in 1958 days. The individual antineutrino spectra of the two dominant isotopes, $^{235}$U and $^{239}$Pu, are extracted using the evolution of the prompt spectrum as a function of the isotope fission fractions. In the energy window of 4--6~MeV, a 7\% (9\%) excess of events is observed for the $^{235}$U ($^{239}$Pu) spectrum compared with the normalized Huber-Mueller model prediction. The significance of discrepancy is $4.0σ$ for $^{235}$U spectral shape compared with the Huber-Mueller model prediction. The shape of the measured inverse beta-decay prompt energy spectrum disagrees with the prediction of the Huber-Mueller model at $5.3σ$. In the energy range of 4--6~MeV, a maximal local discrepancy of $6.3σ$ is observed.
△ Less
Submitted 16 September, 2019; v1 submitted 16 April, 2019;
originally announced April 2019.
-
Non-Hermitian Photonics based on Charge-Parity Symmetry
Authors:
Junpeng Hou,
Zhitong Li,
Qing Gu,
Chuanwei Zhang
Abstract:
Parity-time ($\mathcal{PT}$) symmetry, originally conceived for non-Hermitian open quantum systems, has opened an excitingly new avenue for the coherent control of light. By tailoring optical gain and loss in integrated photonic structures, $\mathcal{PT}$ symmetric non-Hermitian photonics has found applications in many fields ranging from single mode lasing to novel topological matters. Here we pr…
▽ More
Parity-time ($\mathcal{PT}$) symmetry, originally conceived for non-Hermitian open quantum systems, has opened an excitingly new avenue for the coherent control of light. By tailoring optical gain and loss in integrated photonic structures, $\mathcal{PT}$ symmetric non-Hermitian photonics has found applications in many fields ranging from single mode lasing to novel topological matters. Here we propose a new paradigm towards non-Hermitian photonics based on the charge-parity ($\mathcal{CP}$) symmetry that has the potential to control the flow of light in an unprecedented way. In particular, we consider continuous dielectric chiral materials, where the charge conjugation and parity symmetries are broken individually, but preserved jointly. Surprisingly, the phase transition between real and imaginary spectra across the exceptional point is accompanied by a dramatic change of the photonic band topology from dielectric to hyperbolic. We showcase broad applications of $\mathcal{CP}$ symmetric photonics such as all-angle polarization-dependent negative refraction materials, enhanced spontaneous emission for laser engineering, and non-Hermitian topological photonics. The $\mathcal{CP}$ symmetry opens an unexplored pathway for studying non-Hermitian photonics without optical gain/loss by connecting two previously distinct material properties: chirality and hyperbolicity, therefore providing a powerful tool for engineering many promising applications in photonics and other related fields.
△ Less
Submitted 10 April, 2019;
originally announced April 2019.
-
A high precision calibration of the nonlinear energy response at Daya Bay
Authors:
Daya Bay collaboration,
D. Adey,
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
J. F. Chang,
Y. Chang,
H. S. Chen,
S. M. Chen,
Y. Chen,
Y. X. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
A. Chukanov,
J. P. Cummings,
N. Dash,
F. S. Deng,
Y. Y. Ding
, et al. (173 additional authors not shown)
Abstract:
A high precision calibration of the nonlinearity in the energy response of the Daya Bay Reactor Neutrino Experiment's antineutrino detectors is presented in detail. The energy nonlinearity originates from the particle-dependent light yield of the scintillator and charge-dependent electronics response. The nonlinearity model is constrained by $γ$ calibration points from deployed and naturally occur…
▽ More
A high precision calibration of the nonlinearity in the energy response of the Daya Bay Reactor Neutrino Experiment's antineutrino detectors is presented in detail. The energy nonlinearity originates from the particle-dependent light yield of the scintillator and charge-dependent electronics response. The nonlinearity model is constrained by $γ$ calibration points from deployed and naturally occurring radioactive sources, the $β$ spectrum from $^{12}$B decays, and a direct measurement of the electronics nonlinearity with a new flash analog-to-digital converter readout system. Less than 0.5% uncertainty in the energy nonlinearity calibration is achieved for positrons of kinetic energies greater than 1 MeV.
△ Less
Submitted 27 June, 2019; v1 submitted 21 February, 2019;
originally announced February 2019.
-
Nanoscale NMR Spectroscopy using Self-Calibrating Nanodiamond Quantum Sensors
Authors:
Jeffrey Holzgrafe,
Qiushi Gu,
Jan Beitner,
Dhiren Kara,
Helena S. Knowles,
Mete Atatüre
Abstract:
Conventional nuclear magnetic resonance (NMR) spectroscopy relies on acquiring signal from a macroscopic ensemble of molecules to gain information about molecular structure and dynamics. Transferring this technique to nanoscale sample sizes would enable molecular analysis without the effects of averaging over spatial and temporal inhomogeneities and without the need for macroscopic volumes of anal…
▽ More
Conventional nuclear magnetic resonance (NMR) spectroscopy relies on acquiring signal from a macroscopic ensemble of molecules to gain information about molecular structure and dynamics. Transferring this technique to nanoscale sample sizes would enable molecular analysis without the effects of averaging over spatial and temporal inhomogeneities and without the need for macroscopic volumes of analyte, both inherent to large ensemble measurements. Nanoscale NMR based on nitrogen vacancy (NV) centers inside bulk diamond chips achieves single nuclear spin sensitivity and the resolution required to determine chemical structure, but their detection volume is limited to a few nanometers above the diamond surface for the most sensitive devices. This precludes them from use for nuclear spin sensing with nanoscale resolution inside thicker structures, such as cells. Here, we demonstrate the detection of NMR signals from multiple nuclear species in a (19 nm)3 volume using versatile NV-NMR devices inside nanodiamonds that have a typical 30 nm diameter. The devices detect a signal generated by a small number of analyte molecules on the order of 1000. To use these devices in situ, the detected signal must be corrected for the unknown geometry of each nanodiamond device. We show that such a calibration could be performed by exploiting the signal from a thin layer of nuclei on the diamond surface. These results, combined with the low toxicity of nanodiamonds and their amenability to surface functionalization, indicate that nanodiamond NV-NMR devices could become a useful tool for nanoscale NMR-based sensing inside living cells.
△ Less
Submitted 5 February, 2019;
originally announced February 2019.
-
Flexible Ultrastrong 100-nm Polyethylene Membranes with Polygonal Pore Structures
Authors:
Jin Li,
Runlai Li,
Qiao Gu,
Qinghua Zhang,
T. X. Yu,
Ping Gao
Abstract:
Robust nanoporous polymer films with approximate 100-nm thicknesses would be broadly applicable in technological areas such as flexible sensors, artificial skins, separators, antireflection and self-cleaning films. However, the creation of these films has been extremely challenging. To date, all reported ultrathin films are of insufficient mechanical strength for use without substrate supports. We…
▽ More
Robust nanoporous polymer films with approximate 100-nm thicknesses would be broadly applicable in technological areas such as flexible sensors, artificial skins, separators, antireflection and self-cleaning films. However, the creation of these films has been extremely challenging. To date, all reported ultrathin films are of insufficient mechanical strength for use without substrate supports. We describe here the fabrication of a new ultrastrong and highly flexible ultrahigh molecular weight polyethylene (UHMWPE) 100-nm porous membrane. Scanning and transmission electron microscopy evaluations of film microstructures reveal a planar fibrous structure with randomly oriented polygonal interconnected pores. Moreover, the tensile strength of this film is twice as strong as that of solid stainless steel, with a measured in-plane tensile strength and ductility of approximately 900 MPa and 26%, respectively. We further coated our newly developed film with a monolayer graphene to invent an optically transparent and fully conformable piezoresistive skin sensor and thus demonstrated a potential application.
△ Less
Submitted 23 January, 2019;
originally announced January 2019.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
First Investigation on the Radiation Field of the Gas-Filled Three-Axis Cylindrical Hohlraum
Authors:
Hang Li,
Longfei Jing,
Shaoen Jiang,
Longyu Kuang,
Huabin Du,
Xiayu Zhan,
Zhichao Li,
Sanwei Li,
Liling Li,
Jianhua Zheng,
Jinhua Zheng,
Zhiwei Lin,
Lu Zhang,
Qiangqiang Wang,
Yimeng Yang,
Bo Ma,
Peng Wang,
Dong Yang,
Feng Wang,
Jiamin Yang,
Lin Gao,
Haijun Zhang,
Juan Zhang,
Honglian Wang,
Chenggang Ye
, et al. (16 additional authors not shown)
Abstract:
A novel ignition hohlraum named three-axis cylindrical hohlraum (TACH) is designed for indirect-drive inertial confinement fusion. TACH is a kind of 6 laser entrance holes (LEHs) hohlraum, which is orthogonally jointed of three cylindrical hohlraums. The first experiment on the radiation field of TACH was performed on Shenguang III laser facility. 24 laser beams were elected and injected into 6 LE…
▽ More
A novel ignition hohlraum named three-axis cylindrical hohlraum (TACH) is designed for indirect-drive inertial confinement fusion. TACH is a kind of 6 laser entrance holes (LEHs) hohlraum, which is orthogonally jointed of three cylindrical hohlraums. The first experiment on the radiation field of TACH was performed on Shenguang III laser facility. 24 laser beams were elected and injected into 6 LEHs quasi-symmetrically. Total laser energy was about 59 kJ, and the peak radiation temperature reached about 192 eV. Radiation temperature and pinhole images in gas-filled hohlraum are largely identical but with minor differences with those in vacuum hohlraum. All laser energy can be totally delivered into hohlraum in 3 ns duration even without filled gas in the hohlraum of 1.4 mm diameter. Plasma filling cannot be obviously suppressed even with 0.5 atm pressure gas in the small hohlraum. Backscattering fractions of vacuum hohlraum and gas-filled hohlraum are both lower than 2%. Experimental study of this new kind of hohlraum can provide guidance for future target design and implosion experiment.
△ Less
Submitted 10 September, 2018;
originally announced September 2018.
-
Measurement of electron antineutrino oscillation with 1958 days of operation at Daya Bay
Authors:
Daya Bay Collaboration,
D. Adey,
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
Y. L. Chan,
J. F. Chang,
Y. Chang,
H. S. Chen,
S. M. Chen,
Y. Chen,
Y. X. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
A. Chukanov,
J. P. Cummings,
F. S. Deng,
Y. Y. Ding
, et al. (180 additional authors not shown)
Abstract:
We report a measurement of electron antineutrino oscillation from the Daya Bay Reactor Neutrino Experiment with nearly 4 million reactor $\overlineν_{e}$ inverse beta decay candidates observed over 1958 days of data collection. The installation of a Flash-ADC readout system and a special calibration campaign using different source enclosures reduce uncertainties in the absolute energy calibration…
▽ More
We report a measurement of electron antineutrino oscillation from the Daya Bay Reactor Neutrino Experiment with nearly 4 million reactor $\overlineν_{e}$ inverse beta decay candidates observed over 1958 days of data collection. The installation of a Flash-ADC readout system and a special calibration campaign using different source enclosures reduce uncertainties in the absolute energy calibration to less than 0.5% for visible energies larger than 2 MeV. The uncertainty in the cosmogenic $^9$Li and $^8$He background is reduced from 45% to 30% in the near detectors. A detailed investigation of the spent nuclear fuel history improves its uncertainty from 100% to 30%. Analysis of the relative $\overlineν_{e}$ rates and energy spectra among detectors yields
$\sin^{2}2θ_{13} = 0.0856\pm 0.0029$ and $Δm^2_{32}=(2.471^{+0.068}_{-0.070})\times 10^{-3}~\mathrm{eV}^2$ assuming the normal hierarchy, and $Δm^2_{32}=-(2.575^{+0.068}_{-0.070})\times 10^{-3}~\mathrm{eV}^2$ assuming the inverted hierarchy.
△ Less
Submitted 19 December, 2018; v1 submitted 6 September, 2018;
originally announced September 2018.
-
Improved Measurement of the Reactor Antineutrino Flux at Daya Bay
Authors:
Daya Bay Collaboration,
D. Adey,
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
Y. L. Chan,
J. F. Chang,
Y. Chang,
H. S. Chen,
S. M. Chen,
Y. Chen,
Y. X. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
A. Chukanov,
J. P. Cummings,
F. S. Deng,
Y. Y. Ding
, et al. (178 additional authors not shown)
Abstract:
This work reports a precise measurement of the reactor antineutrino flux using 2.2 million inverse beta decay (IBD) events collected with the Daya Bay near detectors in 1230 days. The dominant uncertainty on the neutron detection efficiency is reduced by 56% with respect to the previous measurement through a comprehensive neutron calibration and detailed data and simulation analysis. The new avera…
▽ More
This work reports a precise measurement of the reactor antineutrino flux using 2.2 million inverse beta decay (IBD) events collected with the Daya Bay near detectors in 1230 days. The dominant uncertainty on the neutron detection efficiency is reduced by 56% with respect to the previous measurement through a comprehensive neutron calibration and detailed data and simulation analysis. The new average IBD yield is determined to be $(5.91\pm0.09)\times10^{-43}~\rm{cm}^2/\rm{fission}$ with total uncertainty improved by 29%. The corresponding mean fission fractions from the four main fission isotopes $^{235}$U, $^{238}$U, $^{239}$Pu, and $^{241}$Pu are 0.564, 0.076, 0.304, and 0.056, respectively. The ratio of measured to predicted antineutrino yield is found to be $0.952\pm0.014\pm0.023$ ($1.001\pm0.015\pm0.027$) for the Huber-Mueller (ILL-Vogel) model, where the first and second uncertainty are experimental and theoretical model uncertainty, respectively. This measurement confirms the discrepancy between the world average of reactor antineutrino flux and the Huber-Mueller model.
△ Less
Submitted 31 August, 2018;
originally announced August 2018.
-
Topological bands and triply-degenerate points in non-Hermitian hyperbolic metamaterials
Authors:
Junpeng Hou,
Zhitong Li,
Xi-Wang Luo,
Qing Gu,
Chuanwei Zhang
Abstract:
Hyperbolic metamaterials (HMMs), an unusual class of electromagnetic metamaterials, have found important applications in various fields due to their distinctive properties. A surprising feature of HMMs is that even continuous HMMs can possess topological edge modes. However, previous studies based on equal-frequency surface (analogy of Fermi surface) may not correctly capture the topology of entir…
▽ More
Hyperbolic metamaterials (HMMs), an unusual class of electromagnetic metamaterials, have found important applications in various fields due to their distinctive properties. A surprising feature of HMMs is that even continuous HMMs can possess topological edge modes. However, previous studies based on equal-frequency surface (analogy of Fermi surface) may not correctly capture the topology of entire bands. Here we develop a topological band description for continuous HMMs that can be described by a non-Hermitian Hamiltonian formulated from Maxwell's equations. We find two types of three dimensional non-Hermitian triply-degenerate points with complex linear dispersions and topological charges $\pm 2$ and 0 induced by chiral and gyromagnetic effects. Because of the photonic nature, the vacuum band plays an important role for topological edge states and bulk-edge correspondence in HMMs. The topological band results are numerically confirmed by direct simulation of Maxwell's equations. Our work presents a general non-Hermitian topological band treatment of continuous HMMs, paving the way for exploring interesting topological phases in photonic continua and device implementations of topological HMMs.
△ Less
Submitted 11 May, 2020; v1 submitted 21 August, 2018;
originally announced August 2018.
-
An improved boundary condition at a low grid resolution and Reynolds number
Authors:
T. Burel,
Q. Gu
Abstract:
Complex geometries can be easily treated using the well-known full-way and half-way bounce-back rules. However, the accuracy of the full-way bounce-back rule is one order lower than the half-way bounce-back rule. Moreover, when the walls are not aligned with the lattices, the errors increase. Including the collision operator on the walls with the full-way bounce-back rule leads to an improvement o…
▽ More
Complex geometries can be easily treated using the well-known full-way and half-way bounce-back rules. However, the accuracy of the full-way bounce-back rule is one order lower than the half-way bounce-back rule. Moreover, when the walls are not aligned with the lattices, the errors increase. Including the collision operator on the walls with the full-way bounce-back rule leads to an improvement of the accuracy of the pressure-drop, but, a loss of momentum is observed on concave corners. We propose to improve the momentum conservation by adding an extrapolation of the density by the inverse distance weighting at concave corners. The technique is shown to give a second-order accuracy at a lower grid resolution, thus, the computational cost can be reduced.
△ Less
Submitted 10 June, 2018;
originally announced June 2018.
-
Room-temperature continuous-wave operation of organometal halide perovskite lasers
Authors:
Zhitong Li,
Jiyoung Moon,
Abouzar Gharajeh,
Ross Haroldson,
Roberta Hawkins,
Walter Hu,
Anvar Zakhidov,
Qing Gu
Abstract:
Solution-processed organic-inorganic lead halide perovskites have recently emerged as promising gain media for tunable semiconductor lasers, and have come to rival inorganic III-V group semiconductors as the material candidate for chip-scale lasers. Although electrically pumped lasing at room temperature is the ultimate goal, optically pumped continuous-wave lasing at room temperature,a prerequisi…
▽ More
Solution-processed organic-inorganic lead halide perovskites have recently emerged as promising gain media for tunable semiconductor lasers, and have come to rival inorganic III-V group semiconductors as the material candidate for chip-scale lasers. Although electrically pumped lasing at room temperature is the ultimate goal, optically pumped continuous-wave lasing at room temperature,a prerequisite for a laser diode,has not been achieved so far. Here, we report lasing action in a surface emitting distributed feedback methylammonium lead iodide (MAPbI3) perovskite laser on silicon substrate, at room temperature under continuous-wave optical pumping, in ambient air environment. This outstanding performance is achieved by the ultra-low lasing threshold of 13 W/cm2, which is enabled by the thermal nanoimprint lithography that directly patterns perovskite into a high Q cavity with large mode confinement, while at the same time improves perovskite emission characteristics. Our results represent a major step toward the realization of perovskite laser diodes, which is essential in the future insertion of perovskite lasers into photonic integrated circuits, for applications in optical computing, sensing and on-chip quantum information.
△ Less
Submitted 26 June, 2018; v1 submitted 2 May, 2018;
originally announced May 2018.
-
Cosmogenic neutron production at Daya Bay
Authors:
Daya Bay Collaboration,
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
Y. L. Chan,
J. F. Chang,
Y. Chang,
H. S. Chen,
S. M. Chen,
Y. Chen,
Y. X. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
A. Chukanov,
J. P. Cummings,
Y. Y. Ding,
M. V. Diwan,
M. Dolgareva
, et al. (177 additional authors not shown)
Abstract:
Neutrons produced by cosmic ray muons are an important background for underground experiments studying neutrino oscillations, neutrinoless double beta decay, dark matter, and other rare-event signals. A measurement of the neutron yield in the three different experimental halls of the Daya Bay Reactor Neutrino Experiment at varying depth is reported. The neutron yield in Daya Bay's liquid scintilla…
▽ More
Neutrons produced by cosmic ray muons are an important background for underground experiments studying neutrino oscillations, neutrinoless double beta decay, dark matter, and other rare-event signals. A measurement of the neutron yield in the three different experimental halls of the Daya Bay Reactor Neutrino Experiment at varying depth is reported. The neutron yield in Daya Bay's liquid scintillator is measured to be $Y_n=(10.26\pm 0.86)\times 10^{-5}$, $(10.22\pm 0.87)\times 10^{-5}$, and $(17.03\pm 1.22)\times 10^{-5}~μ^{-1}~$g$^{-1}~$cm$^2$ at depths of 250, 265, and 860 meters-water-equivalent. These results are compared to other measurements and the simulated neutron yield in Fluka and Geant4. A global fit including the Daya Bay measurements yields a power law coefficient of $0.77 \pm 0.03$ for the dependence of the neutron yield on muon energy.
△ Less
Submitted 23 March, 2018; v1 submitted 1 November, 2017;
originally announced November 2017.
-
Seasonal Variation of the Underground Cosmic Muon Flux Observed at Daya Bay
Authors:
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
Y. L. Chan,
J. F. Chang,
Y. Chang,
H. S. Chen,
Q. Y. Chen,
S. M. Chen,
Y. X. Chen,
Y. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
A. Chukanov,
J. P. Cummings,
Y. Y. Ding,
M. V. Diwan,
M. Dolgareva
, et al. (179 additional authors not shown)
Abstract:
The Daya Bay Experiment consists of eight identically designed detectors located in three underground experimental halls named as EH1, EH2, EH3, with 250, 265 and 860 meters of water equivalent vertical overburden, respectively. Cosmic muon events have been recorded over a two-year period. The underground muon rate is observed to be positively correlated with the effective atmospheric temperature…
▽ More
The Daya Bay Experiment consists of eight identically designed detectors located in three underground experimental halls named as EH1, EH2, EH3, with 250, 265 and 860 meters of water equivalent vertical overburden, respectively. Cosmic muon events have been recorded over a two-year period. The underground muon rate is observed to be positively correlated with the effective atmospheric temperature and to follow a seasonal modulation pattern. The correlation coefficient $α$, describing how a variation in the muon rate relates to a variation in the effective atmospheric temperature, is found to be $α_{\text{EH1}} = 0.362\pm0.031$, $α_{\text{EH2}} = 0.433\pm0.038$ and $α_{\text{EH3}} = 0.641\pm0.057$ for each experimental hall.
△ Less
Submitted 8 January, 2018; v1 submitted 3 August, 2017;
originally announced August 2017.
-
Switchyard design for the Shanghai soft x-ray free electron laser facility
Authors:
Duan Gu,
Zhen Wang,
Dazhang Huang,
Qiang Gu,
Meng Zhang
Abstract:
In this article, a feasible switchyard design is proposed for the Shanghai soft x-ray free electron laser facility. In the proposed scheme, a switchyard is used to transport the electron beam to different undulator lines. Three-dimensional start-to-end simulations have been carried out to research the beam dynamic during transportation. The results show that the emittance of the electron beam incr…
▽ More
In this article, a feasible switchyard design is proposed for the Shanghai soft x-ray free electron laser facility. In the proposed scheme, a switchyard is used to transport the electron beam to different undulator lines. Three-dimensional start-to-end simulations have been carried out to research the beam dynamic during transportation. The results show that the emittance of the electron beam increases less than 10%, at meanwhile, the peak current, the energy spread and the bunch length are not spoiled as the beam passes through the switchyard. The microbunching instability of the beam and the jitter of the linear accelerator (linac) are analyzed as well.
△ Less
Submitted 14 May, 2017; v1 submitted 25 April, 2017;
originally announced April 2017.
-
Evolution of the Reactor Antineutrino Flux and Spectrum at Daya Bay
Authors:
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
Y. L. Chan,
J. F. Chang,
Y. Chang,
H. S. Chen,
Q. Y. Chen,
S. M. Chen,
Y. X. Chen,
Y. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
A. Chukanov,
J. P. Cummings,
Y. Y. Ding,
M. V. Diwan,
M. Dolgareva
, et al. (180 additional authors not shown)
Abstract:
The Daya Bay experiment has observed correlations between reactor core fuel evolution and changes in the reactor antineutrino flux and energy spectrum. Four antineutrino detectors in two experimental halls were used to identify 2.2 million inverse beta decays (IBDs) over 1230 days spanning multiple fuel cycles for each of six 2.9 GW$_{\textrm{th}}$ reactor cores at the Daya Bay and Ling Ao nuclear…
▽ More
The Daya Bay experiment has observed correlations between reactor core fuel evolution and changes in the reactor antineutrino flux and energy spectrum. Four antineutrino detectors in two experimental halls were used to identify 2.2 million inverse beta decays (IBDs) over 1230 days spanning multiple fuel cycles for each of six 2.9 GW$_{\textrm{th}}$ reactor cores at the Daya Bay and Ling Ao nuclear power plants. Using detector data spanning effective $^{239}$Pu fission fractions, $F_{239}$, from 0.25 to 0.35, Daya Bay measures an average IBD yield, $\barσ_f$, of $(5.90 \pm 0.13) \times 10^{-43}$ cm$^2$/fission and a fuel-dependent variation in the IBD yield, $dσ_f/dF_{239}$, of $(-1.86 \pm 0.18) \times 10^{-43}$ cm$^2$/fission. This observation rejects the hypothesis of a constant antineutrino flux as a function of the $^{239}$Pu fission fraction at 10 standard deviations. The variation in IBD yield was found to be energy-dependent, rejecting the hypothesis of a constant antineutrino energy spectrum at 5.1 standard deviations. While measurements of the evolution in the IBD spectrum show general agreement with predictions from recent reactor models, the measured evolution in total IBD yield disagrees with recent predictions at 3.1$σ$. This discrepancy indicates that an overall deficit in measured flux with respect to predictions does not result from equal fractional deficits from the primary fission isotopes $^{235}$U, $^{239}$Pu, $^{238}$U, and $^{241}$Pu. Based on measured IBD yield variations, yields of $(6.17 \pm 0.17)$ and $(4.27 \pm 0.26) \times 10^{-43}$ cm$^2$/fission have been determined for the two dominant fission parent isotopes $^{235}$U and $^{239}$Pu. A 7.8% discrepancy between the observed and predicted $^{235}$U yield suggests that this isotope may be the primary contributor to the reactor antineutrino anomaly.
△ Less
Submitted 20 June, 2017; v1 submitted 4 April, 2017;
originally announced April 2017.
-
Capturing relativistic wake eld structures in plasmas using ultrashort high-energy electrons as a probe
Authors:
C. J. Zhang,
J. F. Hua,
X. L. Xu,
F. Li,
C. -H. Pai,
Y. Wan,
Y. P. Wu,
Y. Q. Gu,
W. B. Mori,
C. Joshi,
W. Lu
Abstract:
A new method capable of capturing coherent electric field structures propagating at nearly the speed of light in plasma with a time resolution as small as a few femtoseconds is proposed. This method uses a few femtoseconds long relativistic electron bunch to probe the wake produced in a plasma by an intense laser pulse or an ultra-short relativistic charged particle beam. As the probe bunch traver…
▽ More
A new method capable of capturing coherent electric field structures propagating at nearly the speed of light in plasma with a time resolution as small as a few femtoseconds is proposed. This method uses a few femtoseconds long relativistic electron bunch to probe the wake produced in a plasma by an intense laser pulse or an ultra-short relativistic charged particle beam. As the probe bunch traverses the wake, its momentum is modulated by the electric field of the wake, leading to a density variation of the probe after free-space propagation. This variation of probe density produces a snapshot of the wake that can directly give many useful information of the wake structure and its evolution. Furthermore, this snapshot allows detailed mapping of the longitudinal and transverse components of the wakefield. We develop a theoretical model for field reconstruction and verify it using 3-dimensional particle-in-cell (PIC) simulations. This model can accurately reconstruct the wakefield structure in the linear regime, and it can also qualitatively map the major features of nonlinear wakes. The capturing of the injection in a nonlinear wake is demonstrated through 3D PIC simulations as an example of the applications of this new method.
△ Less
Submitted 18 October, 2016;
originally announced October 2016.
-
Femtosecond probing of light-speed plasma wakefields by using a relativistic electron bunch
Authors:
C. J. Zhang,
J. F. Hua,
Y. Wan,
B. Guo,
Y. P. Wu,
C. -H. Pai,
F. Li,
H. -H. Chu,
Y. Q. Gu,
X. L. Xu,
W. B. Mori,
C. Joshi,
J. Wang,
W. Lu
Abstract:
Relativistic wakes produced by intense laser or particle beams propagating through plasmas are being considered as accelerators for next generation of colliders and coherent light sources. Such wakes have been shown to accelerate electrons and positrons to several gigaelectronvolts (GeV), with a few percent energy spread and a high wake-to-beam energy transfer efficiency. However, complete mapping…
▽ More
Relativistic wakes produced by intense laser or particle beams propagating through plasmas are being considered as accelerators for next generation of colliders and coherent light sources. Such wakes have been shown to accelerate electrons and positrons to several gigaelectronvolts (GeV), with a few percent energy spread and a high wake-to-beam energy transfer efficiency. However, complete mapping of electric field structure of the wakes has proven elusive. Here we show that a high-energy electron bunch can be used to probe the fields of such light-speed wakes with femtosecond resolution. The highly transient, microscopic wakefield is reconstructed from the density modulated ultra-short probe bunch after it has traversed the wake. This technique enables visualization of linear wakefields in low-density plasmas that can accelerate electrons and positrons beams. It also allows characterization of wakes in plasma density ramps critical for maintaining the beam emittance, improving the energy transfer efficiency and producing high brightness beams from plasma accelerators.
△ Less
Submitted 18 October, 2016;
originally announced October 2016.
-
Measurement of electron antineutrino oscillation based on 1230 days of operation of the Daya Bay experiment
Authors:
Daya Bay Collaboration,
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
W. R. Cen,
Y. L. Chan,
J. F. Chang,
L. C. Chang,
Y. Chang,
H. S. Chen,
Q. Y. Chen,
S. M. Chen,
Y. X. Chen,
Y. Chen,
J. -H. Cheng,
J. Cheng,
Y. P. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu
, et al. (198 additional authors not shown)
Abstract:
A measurement of electron antineutrino oscillation by the Daya Bay Reactor Neutrino Experiment is described in detail. Six 2.9-GW$_{\rm
th}$ nuclear power reactors of the Daya Bay and Ling Ao nuclear power facilities served as intense sources of $\overlineν_{e}$'s. Comparison of the $\overlineν_{e}$ rate and energy spectrum measured by antineutrino detectors far from the nuclear reactors (…
▽ More
A measurement of electron antineutrino oscillation by the Daya Bay Reactor Neutrino Experiment is described in detail. Six 2.9-GW$_{\rm
th}$ nuclear power reactors of the Daya Bay and Ling Ao nuclear power facilities served as intense sources of $\overlineν_{e}$'s. Comparison of the $\overlineν_{e}$ rate and energy spectrum measured by antineutrino detectors far from the nuclear reactors ($\sim$1500-1950 m) relative to detectors near the reactors ($\sim$350-600 m) allowed a precise measurement of $\overlineν_{e}$ disappearance. More than 2.5 million $\overlineν_{e}$ inverse beta decay interactions were observed, based on the combination of 217 days of operation of six antineutrino detectors (Dec. 2011--Jul. 2012) with a subsequent 1013 days using the complete configuration of eight detectors (Oct. 2012--Jul. 2015). The $\overlineν_{e}$ rate observed at the far detectors relative to the near detectors showed a significant deficit, $R=0.949 \pm 0.002(\mathrm{stat.}) \pm 0.002(\mathrm{syst.})$. The energy dependence of $\overlineν_{e}$ disappearance showed the distinct variation predicted by neutrino oscillation. Analysis using an approximation for the three-flavor oscillation probability yielded the flavor-mixing angle $\sin^22θ_{13}=0.0841 \pm 0.0027(\mathrm{stat.}) \pm 0.0019(\mathrm{syst.})$ and the effective neutrino mass-squared difference of $\left|Δm^2_{\mathrm{ee}}\right|=(2.50 \pm 0.06(\mathrm{stat.}) \pm 0.06(\mathrm{syst.})) \times 10^{-3}\ {\rm eV}^2$. Analysis using the exact three-flavor probability found $Δm^2_{32}=(2.45 \pm 0.06(\mathrm{stat.}) \pm 0.06(\mathrm{syst.})) \times 10^{-3}\ {\rm eV}^2$ assuming the normal neutrino mass hierarchy and $Δm^2_{32}=(-2.56 \pm 0.06(\mathrm{stat.}) \pm 0.06(\mathrm{syst.})) \times 10^{-3}\ {\rm eV}^2$ for the inverted hierarchy.
△ Less
Submitted 15 October, 2016;
originally announced October 2016.