-
Topological polarization singularities induced by the non-Hermitian Dirac points
Authors:
Jun Wang,
Jie Liu,
Peng Hu,
Qiao Jiang,
Dezhuan Han
Abstract:
A Dirac point in the Hermitian photonic system will split into a pair of exceptional points (EPs) or even spawn a ring of EPs if non-Hermiticity is involved. Here, we present a new type of non-Hermitian Dirac point which is situated in the complex plane of eigenfrequency. When there is differential loss, the Dirac point exhibits a dual behavior: it not only splits into a pair of EPs with opposite…
▽ More
A Dirac point in the Hermitian photonic system will split into a pair of exceptional points (EPs) or even spawn a ring of EPs if non-Hermiticity is involved. Here, we present a new type of non-Hermitian Dirac point which is situated in the complex plane of eigenfrequency. When there is differential loss, the Dirac point exhibits a dual behavior: it not only splits into a pair of EPs with opposite chirality in the band structure but also induces a pair of circularly polarized states (C points) with opposite handedness in the far-field radiation. Furthermore, breaking the corresponding mirror symmetries enables independent control of these Dirac-point induced C points, facilitating the merging of two C points and generation of unidirectional guided resonances. Our results demonstrate an explicit relation between the band singularities and polarization singularities, and provide a new mechanism to generate unidirectional emission, which can be useful in the band engineering and polarization manipulation.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
Technical Design Report of the Spin Physics Detector at NICA
Authors:
The SPD Collaboration,
V. Abazov,
V. Abramov,
L. Afanasyev,
R. Akhunzyanov,
A. Akindinov,
I. Alekseev,
A. Aleshko,
V. Alexakhin,
G. Alexeev,
L. Alimov,
A. Allakhverdieva,
A. Amoroso,
V. Andreev,
V. Andreev,
E. Andronov,
Yu. Anikin,
S. Anischenko,
A. Anisenkov,
V. Anosov,
E. Antokhin,
A. Antonov,
S. Antsupov,
A. Anufriev,
K. Asadova
, et al. (392 additional authors not shown)
Abstract:
The Spin Physics Detector collaboration proposes to install a universal detector in the second interaction point of the NICA collider under construction (JINR, Dubna) to study the spin structure of the proton and deuteron and other spin-related phenomena using a unique possibility to operate with polarized proton and deuteron beams at a collision energy up to 27 GeV and a luminosity up to…
▽ More
The Spin Physics Detector collaboration proposes to install a universal detector in the second interaction point of the NICA collider under construction (JINR, Dubna) to study the spin structure of the proton and deuteron and other spin-related phenomena using a unique possibility to operate with polarized proton and deuteron beams at a collision energy up to 27 GeV and a luminosity up to $10^{32}$ cm$^{-2}$ s$^{-1}$. As the main goal, the experiment aims to provide access to the gluon TMD PDFs in the proton and deuteron, as well as the gluon transversity distribution and tensor PDFs in the deuteron, via the measurement of specific single and double spin asymmetries using different complementary probes such as charmonia, open charm, and prompt photon production processes. Other polarized and unpolarized physics is possible, especially at the first stage of NICA operation with reduced luminosity and collision energy of the proton and ion beams. This document is dedicated exclusively to technical issues of the SPD setup construction.
△ Less
Submitted 28 May, 2024; v1 submitted 12 April, 2024;
originally announced April 2024.
-
Extraction of n = 0 pick-up by locked mode detectors based on neural networks in J-TEXT
Authors:
Chengshuo Shen,
Jianchao Li,
Yonghua Ding,
Jiaolong Dong,
Nengchao Wang,
Dongliang. Han,
Feiyue Mao,
Da Li,
Zhipeng Chen,
Zhoujun Yang,
Zhongyong Chen,
Yuan Pan,
J-Text Team
Abstract:
Measurement of locked mode (LM) is important for the physical research of Magnetohydrodynamic (MHD) instabilities and plasma disruption. The n = 0 pick-up need to be extracted and subtracted to calculate the amplitude and phase of the LM. A new method to extract this pick-up has been developed by predicting the n = 0 pick-up brn=0 by the LM detectors based on Neural Networks (NNs) in J-TEXT. An ap…
▽ More
Measurement of locked mode (LM) is important for the physical research of Magnetohydrodynamic (MHD) instabilities and plasma disruption. The n = 0 pick-up need to be extracted and subtracted to calculate the amplitude and phase of the LM. A new method to extract this pick-up has been developed by predicting the n = 0 pick-up brn=0 by the LM detectors based on Neural Networks (NNs) in J-TEXT. An approach called Power Multiple Time Scale (PMTS) has been developed with outstanding regressing effect in multiple frequency ranges. Three models have been progressed based on PMTS NNs. PMTS could fit the brn=0 on the LM detectors with little errors both in time domain and frequency domain. The n>0 pick-up brn>0 generated by resonant magnetic perturbations (RMPs) can be obtained after subtracting the extracted brn=0. This new method uses only one LM instead of 4 LM detectors to extract brn=0. Therefore, the distribution of the LM detectors can also be optimized based on this new method.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Determination of impact parameter for CEE with digi-input neural networks
Authors:
Botan Wang,
Yi Wang,
Dong Han,
Zhigang Xiao,
Yapeng Zhang
Abstract:
The impact parameter characterizes the centrality in nucleus-nucleus collision geometry. The determination of impact parameters in real experiments is usually based on the reconstructed particle attributes or the derived event-level observables. For the scheduled Cooler-storage-ring External-target Experiment (CEE), the low beam energy reduces correlation between the impact parameter and charged p…
▽ More
The impact parameter characterizes the centrality in nucleus-nucleus collision geometry. The determination of impact parameters in real experiments is usually based on the reconstructed particle attributes or the derived event-level observables. For the scheduled Cooler-storage-ring External-target Experiment (CEE), the low beam energy reduces correlation between the impact parameter and charged particle multiplicity, which decreases the validity of the explicit determination methods. This work investigates a few neural network-based models that directly take the digitized signals from the external Time-of-flight detectors as input. The model with the best performance shows a mean absolute error of 0.479 fm with simulated U-U collisions at 0.5 AGeV. The performances of the models implemented with digi inputs are compared with reference models with phase space inputs, showing the capability of neural networks to handle the original but potentially interrelated digitized signal information.
△ Less
Submitted 27 March, 2024; v1 submitted 28 July, 2023;
originally announced July 2023.
-
General bound states in the continuum in momentum space
Authors:
Qiao Jiang,
Peng Hu,
Jun Wang,
Dezhuan Han,
Jian Zi
Abstract:
Polarization singularities including bound states in the continuum (BICs) and circularly polarized states have provided promising opportunities in the manipulation of light waves. Previous studies show that BICs in photonic crystal slabs are protected by $C_{2}T$ symmetry and hence normally exist on the high-symmetry lines of momentum space. Here, we propose an approach based on graph theory to st…
▽ More
Polarization singularities including bound states in the continuum (BICs) and circularly polarized states have provided promising opportunities in the manipulation of light waves. Previous studies show that BICs in photonic crystal slabs are protected by $C_{2}T$ symmetry and hence normally exist on the high-symmetry lines of momentum space. Here, we propose an approach based on graph theory to study these polarization singularities in momentum space, especially in the region off the high-symmetry lines. With a polarization graph, it is demonstrated for the first time that BICs can stably exist off the high-symmetry lines of momentum space for both one-dimensional and two-dimensional photonic crystal slabs. Furthermore, two kinds of interesting processes, including the merging involved with this newly found BICs both on and off the high-symmetry lines, are observed by merely changing the thickness of photonic crystal slab. Our findings provide a new perspective to explore polarization singularities in momentum space and render their further applications in light-matter interaction and light manipulation.
△ Less
Submitted 21 March, 2023;
originally announced March 2023.
-
Bound States in the Continuum Based on the Total Internal Reflection of Bloch Waves
Authors:
Peng Hu,
Chongwu Xie,
Qianju Song,
Ang Chen,
Hong Xiang,
Dezhuan Han,
Jian Zi
Abstract:
A photonic-crystal slab can support bound states in the continuum (BICs) which have infinite lifetimes but embedded into the continuous spectrum of optical modes in free space. The formation of BICs requires a total internal reflection (TIR) condition at both interfaces between the slab and free space. Here, we show that the TIR of Bloch waves can be directly obtained based on the generalized Fres…
▽ More
A photonic-crystal slab can support bound states in the continuum (BICs) which have infinite lifetimes but embedded into the continuous spectrum of optical modes in free space. The formation of BICs requires a total internal reflection (TIR) condition at both interfaces between the slab and free space. Here, we show that the TIR of Bloch waves can be directly obtained based on the generalized Fresnel equations proposed. If each of these Bloch waves picks up a phase with integer multiples of 2pi for traveling a round trip, light can be perfectly guided in the slab, namely, forming a BIC. A BIC solver with low computational complexity and fast convergence speed is developed, which can also work efficiently at high frequencies beyond the diffraction limit where multiple radiation channels exist. Two examples of multi-channel BICs are shown, and their topological nature in momentum space is also revealed. Both can be attributed to the coincidence of the topological charges of far-field radiations from different radiation channels. The concept of the generalized TIR and the TIR-based BIC solver developed offer highly effective approaches for explorations of BICs which could have many potential applications in guided-wave optics and enhanced light-matter interactions.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Monolithic Integration of Embedded III-V Lasers on SOI
Authors:
Wen Qi Wei,
An He,
Bo Yang,
Jing-Zhi Huang,
Dong Han,
Min Ming,
Zi Hao Wang,
Xuhan Guo,
Yikai Su,
Jian Jun Zhang,
Ting Wang
Abstract:
Silicon photonic integration has gained great success in many application fields owing to the excellent optical device properties and complementary metal-oxide semiconductor (CMOS) compatibility. Realizing monolithic integration of III-V lasers and silicon photonic components on single silicon wafer is recognized as a long-standing obstacle for ultra-dense photonic integration, which can provide c…
▽ More
Silicon photonic integration has gained great success in many application fields owing to the excellent optical device properties and complementary metal-oxide semiconductor (CMOS) compatibility. Realizing monolithic integration of III-V lasers and silicon photonic components on single silicon wafer is recognized as a long-standing obstacle for ultra-dense photonic integration, which can provide considerable economical, energy efficient and foundry-scalable on-chip light sources, that has not been reported yet. Here, we demonstrate embedded InAs/GaAs quantum dot (QD) lasers directly grown on trenched silicon-on-insulator (SOI) substrate, enabling monolithic integration with butt-coupled silicon waveguides. By utilizing the patterned grating structures inside pre-defined SOI trenches and unique epitaxial method via molecular beam epitaxy (MBE), high-performance embedded InAs QD lasers with out-coupled silicon waveguide are achieved on such template. By resolving the epitaxy and fabrication challenges in such monolithic integrated architecture, embedded III-V lasers on SOI with continuous-wave lasing up to 85 oC are obtained. The maximum output power of 6.8 mW can be measured from the end tip of the butt-coupled silicon waveguides, with estimated coupling efficiency of approximately -7.35 dB. The results presented here provide a scalable and low-cost epitaxial method for realization of on-chip light sources directly coupling to the silicon photonic components for future high-density photonic integration.
△ Less
Submitted 16 July, 2022;
originally announced July 2022.
-
Atmospheric Density Model Optimization and Spacecraft Orbit Prediction Improvements Based on Q-Sat Orbit Data
Authors:
Zhaokui Wang,
Yulin Zhang,
Guangwei Wen,
Shunchenqiao Bai,
Yingkai Cai,
Pu Huang,
Dapeng Han,
Yunhan He
Abstract:
Atmospheric drag calculation error greatly reduce the low-earth orbit spacecraft trajectory prediction fidelity. To solve the issue, the "correction - prediction" strategy is usually employed. In the method, one parameter is fixed and other parameters are revised by inverting spacecraft orbit data. However, based on a single spacecraft data, the strategy usually performs poorly as parameters in dr…
▽ More
Atmospheric drag calculation error greatly reduce the low-earth orbit spacecraft trajectory prediction fidelity. To solve the issue, the "correction - prediction" strategy is usually employed. In the method, one parameter is fixed and other parameters are revised by inverting spacecraft orbit data. However, based on a single spacecraft data, the strategy usually performs poorly as parameters in drag force calculation are coupled with each other, which result in convoluted errors. A gravity field recovery and atmospheric density detection satellite, Q-Sat, developed by xxxxx Lab at xxx University, is launched on August 6th, 2020. The satellite is designed to be spherical for a constant drag coefficient regardless of its attitude. An orbit prediction method for low-earth orbit spacecraft with employment of Q-Sat data is proposed in present paper for decoupling atmospheric density and drag coefficient identification. For the first step, by using a dynamic approach-based inversion, several empirical atmospheric density models are revised based on Q-Sat orbit data. Depending on the performs, one of the revised atmospheric density model would be selected for the next step in which the same inversion is employed for drag coefficient identification for a low-earth orbit operating spacecraft whose orbit needs to be predicted. Finally, orbit prediction is conducted by extrapolation with the dynamic parameters in the previous steps. Tests are carried out with the proposed method by using a GOCE satellite 15-day continuous orbit data. Compared with legacy "correction - prediction" method in which only GOCE data is employed, the accuracy of the 24-hour orbit prediction is improved by about 171m the highest for the proposed method. 14-day averaged 24-hour prediction precision is elevated by approximately 70m.
△ Less
Submitted 6 December, 2021;
originally announced December 2021.
-
Identification of the nature of dynamical systems with recurrence plots and convolution neural networks: A preliminary test
Authors:
Daniel Han,
Giuseppe Orlando,
Sergei Fedotov
Abstract:
In this study, we present a method for classifying dynamical systems using a hybrid approach involving recurrence plots and a convolution neural network (CNN). This is performed by obtaining the recurrence matrix of a time series generated from a given dynamical system and then using a CNN to classify the related dynamics observed from the recurrence matrix. We consider three broad classes of dyna…
▽ More
In this study, we present a method for classifying dynamical systems using a hybrid approach involving recurrence plots and a convolution neural network (CNN). This is performed by obtaining the recurrence matrix of a time series generated from a given dynamical system and then using a CNN to classify the related dynamics observed from the recurrence matrix. We consider three broad classes of dynamics: chaotic, periodic, and stochastic. Using a relatively simple CNN structure, we are able to obtain $\sim 90\%$ accuracy in classification. The confusion matrix and receiver operating characteristic curve of classification demonstrate the strength and viability of this hybrid approach.
△ Less
Submitted 20 October, 2021;
originally announced November 2021.
-
Cation disorder in stoichiometric MgSnN2 and ambipolar self-doping behavior in off-stoichiometric MgSnN2
Authors:
Dan Han,
Stefan S. Rudel,
Wolfgang Schnick,
Hubert Ebert
Abstract:
Investigations on II-Sn-N2 (II = Mg, Ca) have been started very recently compared to the intense research of the Zn-IV-N2 (IV = Si, Ge, Sn). In this work, we perform a comprehensive study of cation disorder in stoichiometric MgSnN2 and crystal structure characteristic, doping behavior of off-stoichiometric Mg1+xSn1-xN2 (x = -0.8, -0.6, -0.5, -0.4, -0.2, 0.2, 0.4, 0.5, 0.6, 0.8) by using the cluste…
▽ More
Investigations on II-Sn-N2 (II = Mg, Ca) have been started very recently compared to the intense research of the Zn-IV-N2 (IV = Si, Ge, Sn). In this work, we perform a comprehensive study of cation disorder in stoichiometric MgSnN2 and crystal structure characteristic, doping behavior of off-stoichiometric Mg1+xSn1-xN2 (x = -0.8, -0.6, -0.5, -0.4, -0.2, 0.2, 0.4, 0.5, 0.6, 0.8) by using the cluster expansion method and first principles calculations. It is found that cation disorder in stoichiometric MgSnN2 induces a band gap reduction because of a violation of the octet rule. Moreover, the local disorder, namely forming (4,0) or (0,4) tetrahedra, would lead to an appreciable band gap reduction and hinder the enhancement of the optical absorption. An off-stoichiometric Mg/Sn ratio can strongly affect the morphology of Mg1+xSn1-xN2 samples due to the higher ionicity of the Mg-N bonds in comparison with Zn-N bonds. Furthermore, Mg1+xSn1-xN2 compounds show an ambipolar self-doping behavior, i.e., Mg-rich Mg1+xSn1-xN2 show p-type doping while Sn-rich ones exhibit n-type doping owing to the formation of acceptor-type antisite defect MgSn or donor-type antisite defect SnMg, respectively.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Superdiffusion in self-reinforcing run-and-tumble model with rests
Authors:
Sergei Fedotov,
Daniel Han,
Alexey O Ivanov,
Marco A A da Silva
Abstract:
This paper introduces a run-and-tumble model with self-reinforcing directionality and rests. We derive a single governing hyperbolic partial differential equation for the probability density of random walk position, from which we obtain the second moment in the long time limit. We find the criteria for the transition between superdiffusion and diffusion caused by the addition of a rest state. The…
▽ More
This paper introduces a run-and-tumble model with self-reinforcing directionality and rests. We derive a single governing hyperbolic partial differential equation for the probability density of random walk position, from which we obtain the second moment in the long time limit. We find the criteria for the transition between superdiffusion and diffusion caused by the addition of a rest state. The emergence of superdiffusion depends on both the parameter representing the strength of self-reinforcement and the ratio between mean running and resting times. The mean running time must be at least $2/3$ of the mean resting time for superdiffusion to be possible. Monte Carlo simulations validate this theoretical result. This work demonstrates the possibility of extending the telegrapher's (or Cattaneo) equation by adding self-reinforcing directionality so that superdiffusion occurs even when rests are introduced.
△ Less
Submitted 8 October, 2021;
originally announced October 2021.
-
The anomalous tango of hemocyte migration in Drosophila melanogaster embryos
Authors:
Nickolay Korabel,
Giuliana D. Clemente,
Daniel Han,
Felix Feldman,
Tom H. Millard,
Thomas Andrew Waigh
Abstract:
Drosophila melanogaster hemocytes are highly motile cells that are crucial for successful embryogenesis and have important roles in the organism's immunological response. Hemocyte motion was measured using selective plane illumination microscopy. Every hemocyte cell in one half of an embryo was tracked during embryogenesis and analysed using a deep learning neural network. The anomalous transport…
▽ More
Drosophila melanogaster hemocytes are highly motile cells that are crucial for successful embryogenesis and have important roles in the organism's immunological response. Hemocyte motion was measured using selective plane illumination microscopy. Every hemocyte cell in one half of an embryo was tracked during embryogenesis and analysed using a deep learning neural network. The anomalous transport of the cells was well described by fractional Brownian motion that was heterogeneous in both time and space. Hemocyte motion became less persistent over time. LanB1 and SCAR mutants disrupted the collective cellular motion and reduced its persistence due to the modification of viscoelasticity and actin-based motility respectively. The anomalous motility of the hemocytes oscillated in time with alternating epoques of varying persistent motion. Touching hemocytes experience synchronised contact inhibition of locomotion; an anomalous tango. A quantitative statistical framework is presented for hemocyte motility which provides new biological insights.
△ Less
Submitted 8 September, 2021;
originally announced September 2021.
-
Giant Tuning of Electronic and Thermoelectric Properties by Epitaxial Strain in p-Type Sr-Doped LaCrO3 Transparent Thin Films
Authors:
D. Han,
R. Moalla,
I. Fina,
V. M. Giordano,
M. d'Esperonnat,
C. Botella,
G. Grenet,
R. Debord,
S. Pailhes,
G. Saint-Girons,
R. Bachelet
Abstract:
The impact of epitaxial strain on the structural, electronic, and thermoelectric properties of p-type transparent Sr-doped LaCrO3 thin films has been investigated. For this purpose, high-quality fully strained La0.75Sr0.25CrO3 (LSCO) epitaxial thin films were grown by molecular beam epitaxy on three different (pseudo)cubic (001)-oriented perovskite oxide substrates: LaAlO3, (LaAlO3)0.3(Sr2AlTaO6)0…
▽ More
The impact of epitaxial strain on the structural, electronic, and thermoelectric properties of p-type transparent Sr-doped LaCrO3 thin films has been investigated. For this purpose, high-quality fully strained La0.75Sr0.25CrO3 (LSCO) epitaxial thin films were grown by molecular beam epitaxy on three different (pseudo)cubic (001)-oriented perovskite oxide substrates: LaAlO3, (LaAlO3)0.3(Sr2AlTaO6)0.7, and DyScO3. The lattice mismatch between the LSCO films and the substrates induces in-plane strain ranging from -2.06% (compressive) to +1.75% (tensile). The electric conductivity can be controlled over 2 orders of magnitude, ranging from 0.5 S/cm (tensile strain) to 35 S/cm (compressive strain). Consistently, the Seebeck coefficient S can be finely tuned by a factor of almost 2 from 127 microV/K (compressive strain) to 208 microV/K (tensile strain). Interestingly, we show that the thermoelectric power factor can consequently be tuned by almost 2 orders of magnitude. The compressive strain yields a remarkable enhancement by a factor of 3 for 2% compressive strain with respect to almost relaxed films. These results demonstrate that epitaxial strain is a powerful lever to control the electric properties of LSCO and enhance its thermoelectric properties, which is of high interest for various devices and key applications such as thermal energy harvesters, coolers, transparent conductors, photocatalyzers, and spintronic memories.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
The performance of IHEP-NDL LGAD sensors after neutron irradiation
Authors:
Mengzhao Li,
Yunyun Fan,
Bo Liu,
Han Cui,
Xuewei Jia,
Shuqi Li,
Chengjun Yu,
Xuan Yang,
Wei Wang,
Mingjie Zhai,
Tao Yang,
Kewei Wu,
Yuhang Tan,
Suyu Xiao,
Mei Zhao,
Xin Shi,
Zhijun Liang,
Yuekun Heng,
Joao Guimaraes da Costa,
Xingan Zhang,
Dejun Han,
Alissa Howard,
Gregor Kramberger
Abstract:
The performances of Low Gain Avalanche diode (LGAD) sensors from a neutron irradiation campaign with fluences of 0.8 x 10^15, 15 x 10^15 and 2.5 x 10^15 neq/cm2 are reported in this article. These LGAD sensors are developed by the Institute of High Energy Physics, Chinese Academy of Sciences and the Novel Device Laboratory for the High Granularity Timing Detector of the High Luminosity Large Hadro…
▽ More
The performances of Low Gain Avalanche diode (LGAD) sensors from a neutron irradiation campaign with fluences of 0.8 x 10^15, 15 x 10^15 and 2.5 x 10^15 neq/cm2 are reported in this article. These LGAD sensors are developed by the Institute of High Energy Physics, Chinese Academy of Sciences and the Novel Device Laboratory for the High Granularity Timing Detector of the High Luminosity Large Hadron Collider. The timing resolution and collected charge of the LGAD sensors were measured with electrons from a beta source. After irradiation with a fluence of 2.5 x 10^15 neq/cm2, the collected charge decreases from 40 fC to 7 fC, the signal-to-noise ratio deteriorates from 48 to 12, and the timing resolution increases from 29 ps to 39 ps.
△ Less
Submitted 7 July, 2021;
originally announced July 2021.
-
A multi-center prospective evaluation of THEIA to detect diabetic retinopathy (DR) and diabetic macular edema (DME) in the New Zealand screening program
Authors:
Ehsan Vaghefi,
Song Yang,
Li Xie,
David Han,
David Squirrell
Abstract:
Purpose: to assess the efficacy of THEIA, an artificial intelligence for screening diabetic retinopathy in a multi-center prospective study. To validate the potential application of THEIA as clinical decision making assistant in a national screening program. Methods: 902 patients were recruited from either an urban large eye hospital, or a semi-rural optometrist led screening provider, as they wer…
▽ More
Purpose: to assess the efficacy of THEIA, an artificial intelligence for screening diabetic retinopathy in a multi-center prospective study. To validate the potential application of THEIA as clinical decision making assistant in a national screening program. Methods: 902 patients were recruited from either an urban large eye hospital, or a semi-rural optometrist led screening provider, as they were attending their appointment as part of New Zealand Diabetic Screening programme. These clinics used a variety of retinal cameras and a range of operators. The de-identified images were then graded independently by three senior retinal specialists, and final results were aggregated using New Zealand grading scheme, which is then converted to referable\non-referable and Healthy\mild\more than mild\vision threatening categories. Results: compared to ground truth, THEIA achieved 100% sensitivity and [95.35%-97.44%] specificity, and negative predictive value of 100%. THEIA also did not miss any patients with more than mild or vision threatening disease. The level of agreement between the clinicians and the aggregated results was (k value: 0.9881, 0.9557, and 0.9175), and the level of agreement between THEIA and the aggregated labels was (k value: 0.9515). Conclusion: Our multi-centre prospective trial showed that THEIA does not miss referable disease when screening for diabetic retinopathy and maculopathy. It also has a very high level of granularity in reporting the disease level. Since THEIA is being tested on a variety of cameras, operating in a range of clinics (rural\urban, ophthalmologist-led\optometrist-led), we believe that it will be a suitable addition to a public diabetic screening program.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Current Overview of Statistical Fiber Bundles Model and Its Application to Physics-based Reliability Analysis of Thin-film Dielectrics
Authors:
James U. Gleaton,
David Han,
James D. Lynch,
Hon Keung Tony Ng,
Fabrizio Ruggeri
Abstract:
In this paper, we present a critical overview of statistical fiber bundles models. We discuss relevant aspects, like assumptions and consequences stemming from models in the literature and propose new ones. This is accomplished by concentrating on both the physical and statistical aspects of a specific load-sharing example, the breakdown (BD) for circuits of capacitors and related dielectrics. For…
▽ More
In this paper, we present a critical overview of statistical fiber bundles models. We discuss relevant aspects, like assumptions and consequences stemming from models in the literature and propose new ones. This is accomplished by concentrating on both the physical and statistical aspects of a specific load-sharing example, the breakdown (BD) for circuits of capacitors and related dielectrics. For series and parallel/series circuits (series/parallel reliability systems) of ordinary capacitors, the load-sharing rules are derived from the electrical laws. This with the BD formalism is then used to obtain the BD distribution of the circuit. The BD distribution and Gibbs measure are given for a series circuit and the size effects are illustrated for simulations of series and parallel/series circuits. This is related to the finite weakest link adjustments for the BD distribution that arise in large series/parallel reliability load-sharing systems, such as dielectric BD, from their extreme value approximations.
An elementary but in-depth discussion of the physical aspects of SiO$_2$ and HfO$_2$ dielectrics and cell models is given. This is used to study a load-sharing cell model for the BD of HfO$_2$ dielectrics and the BD formalism. The latter study is based on an analysis of Kim and Lee (2004)'s data for such dielectrics. Here, several BD distributions are compared in the analysis and proportional hazard regression models are used to study the BD formalism. In addition, some areas of open research are discussed.
△ Less
Submitted 25 January, 2023; v1 submitted 9 April, 2021;
originally announced April 2021.
-
Understanding and Mitigating Plume Effects During Powered Descents on the Moon and Mars
Authors:
Ryan N. Watkins,
Philip T. Metzger,
Manish Mehta,
Daoru Han,
Parvathy Prem,
Laurent Sibille,
Adrienne Dove,
Bradley Jolliff,
Daniel P. Moriarty III,
Donald C. Barker,
Ed Patrick,
Matthew Kuhns,
Michael Laine
Abstract:
This 2020 Decadal Survey White Paper reviews what is known about lunar and martian lander Plume Surface Interactions (PSI) during powered descent. This includes an overview of the phenomenology and a description of the induced hardware and environmental impacts. Then it provides an overview of mitigation techniques and a summary of the outstanding questions and strategic knowledge gaps. It finishe…
▽ More
This 2020 Decadal Survey White Paper reviews what is known about lunar and martian lander Plume Surface Interactions (PSI) during powered descent. This includes an overview of the phenomenology and a description of the induced hardware and environmental impacts. Then it provides an overview of mitigation techniques and a summary of the outstanding questions and strategic knowledge gaps. It finishes with five recommendations: to include dedicated descent imagers on every surface mission so that PSI can be directly recorded and reviewed by ground teams; as far as possible, to make all data related to PSI effects publicly accessible; to develop methods and instruments for making key measurements of PSI; to assess and record key flight data; and to invest funding into studies of long-term infrastructure architectures and mitigation techniques.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
Elucidating atmospheric brown carbon -- Supplanting chemical intuition with exhaustive enumeration and machine learning
Authors:
Enrico Tapavicza,
Guido Falk von Rudorff,
David O. De Haan,
Mario Contin,
Christian George,
Matthieu Riva,
O. Anatole von Lilienfeld
Abstract:
To unravel the structures of C12H12O7 isomers, identified as light-absorbing photooxidation products of syringol in atmospheric chamber experiments, we apply a graph-based molecule generator and machine learning workflow. To accomplish this in a bias-free manner, molecular graphs of the entire chemical subspace of C12H12O7 were generated, assuming that the isomers contain two C6-rings; this led to…
▽ More
To unravel the structures of C12H12O7 isomers, identified as light-absorbing photooxidation products of syringol in atmospheric chamber experiments, we apply a graph-based molecule generator and machine learning workflow. To accomplish this in a bias-free manner, molecular graphs of the entire chemical subspace of C12H12O7 were generated, assuming that the isomers contain two C6-rings; this led to 260 million molecular graphs and 120 million stable structures. Using quantum chemistry excitation energies and oscillator strengths as training data, we predicted these quantities using kernel ridge regression and simulated UV/Vis absorption spectra. Then we determined the probability of the molecules to cause the experimental spectrum within the errors of the different methods. Molecules whose spectra were likely to match the experimental spectrum were clustered according to structural features, resulting in clusters of > 500,000 molecules. While we identified several features that correlate with a high probability to cause the experimental spectrum, no clear composition of necessary features can be given. Thus, the absorption spectrum is not sufficient to uniquely identify one specific isomer structure. If more structural features were known from experimental data, the number of structures could be reduced to a few tens of thousands candidates. We offer a procedure to detect when sufficient fragmentation data has been included to reduce the number of possible molecules. The most efficient strategy to obtain valid candidates is obtained if structural data is applied already at the bias-free molecule generation stage. The systematic enumeration, however, is necessary to avoid mis-identification of molecules, while it guarantees that there are no other molecules that would also fit the spectrum in question.
△ Less
Submitted 18 January, 2021;
originally announced January 2021.
-
Variable-order fractional master equation and clustering of particles: non-uniform lysosome distribution
Authors:
Sergei Fedotov,
Daniel Han,
Andrey Yu. Zubarev,
Mark Johnston,
Victoria J Allan
Abstract:
In this paper, we formulate the space-dependent variable-order fractional master equation to model clustering of particles, organelles, inside living cells. We find its solution in the long time limit describing non-uniform distribution due to a space dependent fractional exponent. In the continuous space limit, the solution of this fractional master equation is found to be exactly the same as the…
▽ More
In this paper, we formulate the space-dependent variable-order fractional master equation to model clustering of particles, organelles, inside living cells. We find its solution in the long time limit describing non-uniform distribution due to a space dependent fractional exponent. In the continuous space limit, the solution of this fractional master equation is found to be exactly the same as the space-dependent variable-order fractional diffusion equation. In addition, we show that the clustering of lysosomes, an essential organelle for healthy functioning of mammalian cells, exhibit space-dependent fractional exponents. Furthermore, we demonstrate that the non-uniform distribution of lysosomes in living cells is accurately described by the asymptotic solution of the space-dependent variable-order fractional master equation. Finally, Monte Carlo simulations of the fractional master equation validate our analytical solution.
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
-
Radiation effects on NDL prototype LGAD sensors after proton irradiation
Authors:
Yuhang Tan,
Tao Yang,
Suyu Xiao,
Kewei Wu,
Lei Wang,
Yaoqian Li,
Zhenwei Liu,
Zhijun Liang,
Dejun Han,
Xingan Zhang,
Xin Shi
Abstract:
We study the radiation effects of the Low Gain Avalanche Detector (LGAD) sensors developed by the Institute of High Energy Physics (IHEP) and the Novel Device Laboratory (NDL) of Beijing Normal University in China. These new sensors have been irradiated at the China Institute of Atomic Energy (CIAE) using 100 MeV proton beam with five different fluences from 7$\times10^{14}$ $n_{eq}/cm^2$ up to 4.…
▽ More
We study the radiation effects of the Low Gain Avalanche Detector (LGAD) sensors developed by the Institute of High Energy Physics (IHEP) and the Novel Device Laboratory (NDL) of Beijing Normal University in China. These new sensors have been irradiated at the China Institute of Atomic Energy (CIAE) using 100 MeV proton beam with five different fluences from 7$\times10^{14}$ $n_{eq}/cm^2$ up to 4.5$\times10^{15}$ $n_{eq}/cm^2$. The result shows the effective doping concentration in the gain layer decreases with the increase of irradiation fluence, as expected by the acceptor removal mechanism. By comparing data and model gives the acceptor removal coefficient $c_{A}$ = $(6.07\pm0.70)\times10^{-16}~cm^2$, which indicates the NDL sensor has fairly good radiation resistance.
△ Less
Submitted 20 June, 2020;
originally announced June 2020.
-
Beam test results of IHEP-NDL Low Gain Avalanche Detectors(LGAD)
Authors:
S. Xiao,
S. Alderweireldt,
S. Ali,
C. Allaire,
C. Agapopoulou,
N. Atanov,
M. K. Ayoub,
G. Barone,
D. Benchekroun,
A. Buzatu,
D. Caforio,
L. Castillo García,
Y. Chan,
H. Chen,
V. Cindro,
L. Ciucu,
J. Barreiro Guimarães da Costa,
H. Cui,
F. Davó Miralles,
Y. Davydov,
G. d'Amen,
C. de la Taille,
R. Kiuchi,
Y. Fan,
A. Falou
, et al. (75 additional authors not shown)
Abstract:
To meet the timing resolution requirement of up-coming High Luminosity LHC (HL-LHC), a new detector based on the Low-Gain Avalanche Detector(LGAD), High-Granularity Timing Detector (HGTD), is under intensive research in ATLAS. Two types of IHEP-NDL LGADs(BV60 and BV170) for this update is being developed by Institute of High Energy Physics (IHEP) of Chinese Academic of Sciences (CAS) cooperated wi…
▽ More
To meet the timing resolution requirement of up-coming High Luminosity LHC (HL-LHC), a new detector based on the Low-Gain Avalanche Detector(LGAD), High-Granularity Timing Detector (HGTD), is under intensive research in ATLAS. Two types of IHEP-NDL LGADs(BV60 and BV170) for this update is being developed by Institute of High Energy Physics (IHEP) of Chinese Academic of Sciences (CAS) cooperated with Novel Device Laboratory (NDL) of Beijing Normal University and they are now under detailed study. These detectors are tested with $5GeV$ electron beam at DESY. A SiPM detector is chosen as a reference detector to get the timing resolution of LGADs. The fluctuation of time difference between LGAD and SiPM is extracted by fitting with a Gaussian function. Constant fraction discriminator (CFD) method is used to mitigate the effect of time walk. The timing resolution of $41 \pm 1 ps$ and $63 \pm 1 ps$ are obtained for BV60 and BV170 respectively.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
Improving the time resolution of the MRPC detector using deep-learning algorithms
Authors:
Fuyue Wang,
Dong Han,
Yi Wang
Abstract:
The multi-gap resistive plate chambers (MRPCs) will be used as the Time-of-Flight (ToF) system in the Solenoidal Large Intensity Device (SoLID). The time resolution required by the experiment for the MRPC system is 20 ps in order to make a 3 $σ$ separation of the $π/K$ created in the collisions. To achieve this goal, the whole system including the MRPC detector, the front-end electronics and the r…
▽ More
The multi-gap resistive plate chambers (MRPCs) will be used as the Time-of-Flight (ToF) system in the Solenoidal Large Intensity Device (SoLID). The time resolution required by the experiment for the MRPC system is 20 ps in order to make a 3 $σ$ separation of the $π/K$ created in the collisions. To achieve this goal, the whole system including the MRPC detector, the front-end electronics and the readout system will be upgraded. Based on the new system, a time reconstruction algorithm using a combined LSTM (ComLSTM) neural network is proposed. The best time resolution achieved with this algorithm in a cosmic ray test is 16.8 ps, which largely improves the timing ability of the MRPC detector and well satisfies the requirement of the SoLID.
△ Less
Submitted 8 May, 2020;
originally announced May 2020.
-
Radiation Campaign of HPK Prototype LGAD sensors for the High-Granularity Timing Detector (HGTD)
Authors:
X. Shi,
M. K. Ayoub,
J. Barreiro Guimarães da Costa,
H. Cui,
R. Kiuchi,
Y. Fan,
S. Han,
Y. Huang,
M. Jing,
Z. Liang,
B. Liu,
J. Liu,
F. Lyu,
B. Qi,
K. Ran,
L. Shan,
L. Shi,
Y. Tan,
K. Wu,
S. Xiao,
T. Yang,
Y. Yang,
C. Yu,
M. Zhao,
X. Zhuang
, et al. (52 additional authors not shown)
Abstract:
We report on the results of a radiation campaign with neutrons and protons of Low Gain Avalanche Detectors (LGAD) produced by Hamamatsu (HPK) as prototypes for the High-Granularity Timing Detector (HGTD) in ATLAS. Sensors with an active thickness of 50~$μ$m were irradiated in steps of roughly 2$\times$ up to a fluence of $3\times10^{15}~\mathrm{n_{eq}cm^{-2}}$. As a function of the fluence, the co…
▽ More
We report on the results of a radiation campaign with neutrons and protons of Low Gain Avalanche Detectors (LGAD) produced by Hamamatsu (HPK) as prototypes for the High-Granularity Timing Detector (HGTD) in ATLAS. Sensors with an active thickness of 50~$μ$m were irradiated in steps of roughly 2$\times$ up to a fluence of $3\times10^{15}~\mathrm{n_{eq}cm^{-2}}$. As a function of the fluence, the collected charge and time resolution of the irradiated sensors will be reported for operation at $-30^{\circ}$.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
-
Electric-field control of spin-orbit torques in perpendicularly magnetized W/CoFeB/MgO films
Authors:
Mariia Filianina,
Jan-Philipp Hanke,
Kyujoon Lee,
Dong-Soo Han,
Samridh Jaiswal,
Gerhard Jakob,
Yuriy Mokrousov,
Mathias Kläui
Abstract:
Controlling magnetism by electric fields offers a highly attractive perspective for designing future generations of energy-efficient information technologies. Here, we demonstrate that the magnitude of current-induced spin-orbit torques in thin perpendicularly magnetized CoFeB films can be tuned and even increased by electric field generated piezoelectric strain. Using theoretical calculations, we…
▽ More
Controlling magnetism by electric fields offers a highly attractive perspective for designing future generations of energy-efficient information technologies. Here, we demonstrate that the magnitude of current-induced spin-orbit torques in thin perpendicularly magnetized CoFeB films can be tuned and even increased by electric field generated piezoelectric strain. Using theoretical calculations, we uncover that the subtle interplay of spin-orbit coupling, crystal symmetry, and orbital polarization is at the core of the observed strain dependence of spin-orbit torques. Our results open a path to integrating two energy efficient spin manipulation approaches, the electric field-induced strain and the current-induced magnetization switching, thereby enabling novel device concepts.
△ Less
Submitted 16 February, 2020;
originally announced February 2020.
-
Active suppression of temperature oscillation from a pulse-tube cryocooler in a cryogen-free cryostat: Part 2. Experimental realization
Authors:
Changzhao Pan,
Jiangfeng Hu,
Haiyang Zhang,
Yaonan Song,
Dongxu Han,
Wenjing Liu,
Hui Chen,
Mark Plimmer,
Fernando Sparasci,
Ercang Luo,
Bo Gao,
Laurent Pitre
Abstract:
A cryogen-free cryostat cooled by a closed cycle cryocooler is compact, can provide uninterrupted long-term operation (up to ten thousand hours) and is suited to temperatures from 3 K to 300 K. Its intrinsic temperature oscillation, however, limits its application in experiments requiring high thermal stability at low temperature (below 77 K). Passive suppression methods are effective but all suff…
▽ More
A cryogen-free cryostat cooled by a closed cycle cryocooler is compact, can provide uninterrupted long-term operation (up to ten thousand hours) and is suited to temperatures from 3 K to 300 K. Its intrinsic temperature oscillation, however, limits its application in experiments requiring high thermal stability at low temperature (below 77 K). Passive suppression methods are effective but all suffer from drawbacks. We describe a novel, active suppression scheme more efficient than traditional proportional-integral (PI) control. The experimental results show that it can reduce the standard deviation of the temperature oscillation by a further 30% compared with PI feedback. To the best of our knowledge, this is the first time such active suppression of temperature oscillations has been implemented with the cryogen-free cryostat. The results also show, however, that an unwanted lower frequency thermal noise will be generated, which appears to be the limit of the method. Nevertheless, the approach could be used to improve the temperature stability in all cryogen-free cryostats.
△ Less
Submitted 8 February, 2020;
originally announced February 2020.
-
Active suppression of temperature oscillation from a pulse-tube cryocooler in a cryogen-free cryostat: Part 1. Simulation modeling from thermal response characteristics
Authors:
Changzhao Pan,
Bo Gao,
Yaonan Song,
Haiyang Zhang,
Dongxu Han,
Jiangfeng Hu,
Wenjing Liu,
Hui Chen,
Mark Plimmer,
Fernando Sparasci,
Ercang Luo,
Laurent Pitre
Abstract:
A cryogen-free cryostat cooled using a 4 K commercial GM or pulse tube cryocooler (PTC) displays temperature oscillations caused by the intrinsic working principle of the regenerative cryocooler. To dampen such oscillations usually requires either a large heat capacity or a large thermal resistance. To understand this phenomenon better and suppress it more effectively, both the step response chara…
▽ More
A cryogen-free cryostat cooled using a 4 K commercial GM or pulse tube cryocooler (PTC) displays temperature oscillations caused by the intrinsic working principle of the regenerative cryocooler. To dampen such oscillations usually requires either a large heat capacity or a large thermal resistance. To understand this phenomenon better and suppress it more effectively, both the step response characteristic and the intrinsic oscillation characteristic of cryostat have been used to obtain the complete transfer functions of a simulation model. The latter is used to test and optimize traditional PID feedback control. The results showed this approach has almost no effect on the temperature oscillation amplitude. Based on this simulation model, a novel active method was proposed and tested numerically. Simulation results predict the method should suppress the amplitude of the original temperature oscillation by a factor of two.
△ Less
Submitted 8 February, 2020;
originally announced February 2020.
-
Realization of ppm level pressure stability for primary thermometry using a primary piston gauge
Authors:
Bo Gao,
Hui Chen,
Dongxu Han,
Pascal Gambette,
Haiyang Zhang,
Changzhao Pan,
Yingwen Liu,
Bo Yu,
Ercang Luo,
Mark Plimmer,
Laurent Pitre
Abstract:
To achieve an uncertainty of 0.25 mK in single-pressure refractive-index gas thermometry (SPRIGT), the relative pressure variation of He-4 gas in the range 30 kPa to 90 kPa, should not exceed 4 ppm (k=1). To this end, a novel pressure control system has been developed. It consists of two main parts: a piston gauge to control the pressure, and a home-made gas compensation system to supplement the m…
▽ More
To achieve an uncertainty of 0.25 mK in single-pressure refractive-index gas thermometry (SPRIGT), the relative pressure variation of He-4 gas in the range 30 kPa to 90 kPa, should not exceed 4 ppm (k=1). To this end, a novel pressure control system has been developed. It consists of two main parts: a piston gauge to control the pressure, and a home-made gas compensation system to supplement the micro-leak of the piston gauge. In addition, to maintain the piston at constant height, a servo loop is used that automatically determines in real time the amount of extra gas required. At room temperature, the standard deviations of the stabilized pressure are 3.0 mPa at 30 kPa, 4.5 mPa at 60 kPa and 2 mPa at 90 kPa. For the temperature region 5 K-25 K used for SPRIGT in the present work, the relative pressure stability is better than 0.16 ppm i.e. 25 times better than required. Moreover, the same pressure stabilization system is readily transposable to other primary gas thermometers.
△ Less
Submitted 8 February, 2020;
originally announced February 2020.
-
Resonance frequency measurement with accuracy and stability at the 10-12 level in a copper microwave cavity below 26 K by experimental optimization
Authors:
Haiyang Zhang,
Bo Gao,
Wenjing Liu,
Changzhao Pan,
Dongxu Han,
Ercang Luo,
Laurent Pitre
Abstract:
Single pressure refractive index gas thermometry (SPRIGT) is a novel primary thermometry, jointly developed by TIPC of CAS in China and LNE-Cnam in France. To realize a competitive uncertainty of 0.25 mK for thermodynamic temperature measurements, high-stability and low-uncertainty of microwave resonance frequency measurements better than 2 ppb should be achieved. This article describes how to rea…
▽ More
Single pressure refractive index gas thermometry (SPRIGT) is a novel primary thermometry, jointly developed by TIPC of CAS in China and LNE-Cnam in France. To realize a competitive uncertainty of 0.25 mK for thermodynamic temperature measurements, high-stability and low-uncertainty of microwave resonance frequency measurements better than 2 ppb should be achieved. This article describes how to realize high-stability and low-uncertainty of resonance frequency measurements in a copper microwave cavity by experimental optimization methods based on Allan analysis of variance. In this manner, 10-12 level accuracy and stability of microwave resonance frequency measurements were realized with an integration time of 3 hours, which is nearly 20 times better than those without optimization in our previous work (Sci. Bull 2019; 64: 286-288). It has potential applications in gas metrology and other research fields, where high-stability and low-uncertainty microwave measurements are necessary. Besides, microwave measurements were carried out isobarically at pressures of (30, 60, 90, and 120) kPa over the temperature range of (5 to 26) K, with good microwave mode consistency for the determined thermodynamic temperatures. These will provide strong support for the success of the implementation of SPRIGT in China.
△ Less
Submitted 8 February, 2020;
originally announced February 2020.
-
Prediction and realization of a temperature control limit at low temperatures in SPRIGT
Authors:
Haiyang Zhang,
Bo Gao,
Yaonan Song,
Changzhao Pan,
Jiangfeng Hu,
Dongxu Han,
Ercang Luo,
Laurent Pitre
Abstract:
On May 20th 2019, the World Metrology Day, the Bureau International des Poids et Mesures announced a major revision to the four more SI units. The base unit, the kelvin, is defined by fixing the value of Boltzmann constant as indicated in Mise en pratique for the definition of the kelvin in the SI. To realize the new kelvin, a novel practical realization technique of single-pressure refractive-ind…
▽ More
On May 20th 2019, the World Metrology Day, the Bureau International des Poids et Mesures announced a major revision to the four more SI units. The base unit, the kelvin, is defined by fixing the value of Boltzmann constant as indicated in Mise en pratique for the definition of the kelvin in the SI. To realize the new kelvin, a novel practical realization technique of single-pressure refractive-index gas thermometry (SPRIGT) has been jointly developed by the TIPC-CAS in China and the LNE-Cnam in France. To carry out accurate SPRIGT, experimental methods have been implemented and micro-kelvin level temperature control limits have been predicted and achieved at 5 K to 26 K. The resonator temperature stability can be maintained to within better than 8 μK of its set point with an integration time 33.6 s over 180 h. Besides, solutions for further improving the stability were also demonstrated, which can be a reference for temperature metrology field worldwide and other fields where high-stability temperature is required. The present work should also provide a solid foundation for international data comparison of thermodynamic temperature at low temperatures, and will promote realizations of the new kelvin and the spread of high-accuracy, low-temperature metrology.
△ Less
Submitted 8 February, 2020;
originally announced February 2020.
-
Charaterization of the first prototype IHEP-NDL LGAD sensor
Authors:
Yuzhen Yang,
Suyu Xiao,
Yunyun Fan,
Dejun Han,
Zhijun Liang,
Baohua Qi,
Liaoshan Shi,
Yuhang Tan,
Xingan Zhang,
Xin Shi
Abstract:
The timing measurement of charged particles using silicon detector is widely used in synchrotron source as X-ray detectors, in time-of-flight mass spectrometer and especially in large collider experiment. To reduce the drastically event pile-up of high-luminosity large hadron collider (HL-LHC), a new concept of 4-dimension detector including timing and positon has been proposed. One of the candida…
▽ More
The timing measurement of charged particles using silicon detector is widely used in synchrotron source as X-ray detectors, in time-of-flight mass spectrometer and especially in large collider experiment. To reduce the drastically event pile-up of high-luminosity large hadron collider (HL-LHC), a new concept of 4-dimension detector including timing and positon has been proposed. One of the candidates for the 4-dimension detector is a new kind of silicon detector called Low Gain Avalanche Diode (LGAD). In China, Institute of High Energy Physics (IHEP) Chinese Academic Science cooperated with Novel Device Laboratory (NDL) at Beijing Normal University have fabricated a series of LGAD sensors. The characterization of the first prototype of IHEP-NDL sensors is presented including leakage current and sensor capacitance measurement. A test system for the time resolution of jitter term using pico-second laser and fast sampling rate oscilloscope is also setup, and the time resolution of 10 ps can be achieved with these sensors.
△ Less
Submitted 31 December, 2019;
originally announced December 2019.
-
Improving Performance of Tin-Doped-Zinc-Oxide Thin-Film Transistors by Optimized Multi-Stacked Active-Layer Structures
Authors:
Zhuofa Chen,
Dedong Han,
Xing Zhang,
Yi Wang
Abstract:
In this paper, we investigated the performance of thin-film transistors (TFTs) with different channel configurations including single-active-layer (SAL) Sn-Zn-O (TZO), dual-active-layers (DAL) In-Sn-O (ITO)/TZO, and triple-active-layers (TAL) TZO/ITO/TZO. The TAL TFTs were found to combine the advantages of SAL TFTs (a low off-state current) and DAL TFTs (a high mobility and a low threshold voltag…
▽ More
In this paper, we investigated the performance of thin-film transistors (TFTs) with different channel configurations including single-active-layer (SAL) Sn-Zn-O (TZO), dual-active-layers (DAL) In-Sn-O (ITO)/TZO, and triple-active-layers (TAL) TZO/ITO/TZO. The TAL TFTs were found to combine the advantages of SAL TFTs (a low off-state current) and DAL TFTs (a high mobility and a low threshold voltage). The proposed TAL TFTs exhibit superior electrical performance, e.g. a high on-off state current ratio of 2*10^8, a low threshold voltage of 0.52 V, a high saturation mobility of 145.2 cm2/Vs, and a low off-state current of 3.3 pA. The surface morphology and characteristics of the ITO and TZO films were investigated and the TZO film was found to be C-axis-aligned crystalline (CAAC). A simplified resistance model was deduced to explain the high channel resistance of TAL TFTs. At last, TAL TFTs with different channel lengths were also discussed to show the stability and the uniformity of our fabrication process. Owing to its low-processing temperature, superior electrical performance, and low cost, TFTs with the proposed TAL channel configuration are highly promising for flexible displays where the use of heat-sensitive polymeric substrates is desirable.
△ Less
Submitted 23 August, 2019;
originally announced August 2019.
-
Tailoring of multi-pulse dynamics in mode-locked laser via optoacoustic manipulation of quasi-continuous-wave background
Authors:
Ki Sang Lee,
Chang Kyun Ha,
Kyoung Jun Moon,
Dae Seok Han,
Myeong Soo Kang
Abstract:
A variety of nonequilibrium multi-pulse states can emerge in a mode-locked laser through the interactions between the quasi-continuous-wave background (qCWB) and optical pulses inside the laser cavity. However, they have been long regarded as unpredictable and hardly controllable due to the noise-like nature of the qCWB, and relevant previous studies thus lack a clear understanding of their underl…
▽ More
A variety of nonequilibrium multi-pulse states can emerge in a mode-locked laser through the interactions between the quasi-continuous-wave background (qCWB) and optical pulses inside the laser cavity. However, they have been long regarded as unpredictable and hardly controllable due to the noise-like nature of the qCWB, and relevant previous studies thus lack a clear understanding of their underlying mechanisms. Here, we demonstrate that the qCWB landscape can be manipulated via optoacoustically mediated interactions between the qCWB and mode-locked pulses, which dramatically alters the behaviors of multi-pulse dynamics in unprecedented manners. In this process, impulsive qCWB modulations are created at well-defined temporal locations, which act as the point emitters and attractive potentials for drifting pulse bunches and soliton rains. Hence, we can transport a single pulse bunch from a certain temporal position to another on the qCWB, and also make the soliton rain created and collided exclusively at specific temporal locations, in sharp contrast to the conventional cases. Our study opens up new possibilities to control the nonequilibrium multi-pulse phenomena precisely in the time domain, which would not only help the observation and clear understanding of undiscovered features of multi-pulse dynamics but offer a practical means of advanced optical information processing.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Improving the spatial resolution of NICA/MPD ECAL with new reconstruction methods
Authors:
Fuyue Wang,
Yi Wang,
Dong Han
Abstract:
A Shashlyk-type electromagnetic calorimeter (ECal) will be used in the Multi-purpose Detector at Nuclotron-based Ion Collider facility to study the properties of nuclear matter. In this experiment, the ECal detector is responsible for measuring the energy and position of the incident particles, and identifying them with the information obtained from itself and other detectors. This paper analyzes…
▽ More
A Shashlyk-type electromagnetic calorimeter (ECal) will be used in the Multi-purpose Detector at Nuclotron-based Ion Collider facility to study the properties of nuclear matter. In this experiment, the ECal detector is responsible for measuring the energy and position of the incident particles, and identifying them with the information obtained from itself and other detectors. This paper analyzes the position resolution of the Tsinghua ECal modules using the data from a beam test in DESY. Several reconstruction methods are studied in detail. With a deep learning based algorithm, the position resolution of the prototypes achieves less than 3.8 mm for 1.6 GeV electron beam, which is improved by about 30% compared to that of traditional charge center of gravity method.
△ Less
Submitted 12 October, 2019; v1 submitted 10 February, 2019;
originally announced February 2019.
-
A detailed study on the intrinsic time resolution of the future MRPC detector
Authors:
Fuyue Wang,
Dong Han,
Yi Wang,
Pengfei Lyu,
Yuanjing Li
Abstract:
A challenging goal of 20 ps for the total time resolution of the Multi-gap Resistive Plate Chambers (MRPCs) system has been recently addressed by high energy physics experiments. In order to meet this requirement, one should have a deeper understanding of the detector physics and the factors that contribute to the intrinsic time resolution of the MRPC, which are studied in this paper. The sources…
▽ More
A challenging goal of 20 ps for the total time resolution of the Multi-gap Resistive Plate Chambers (MRPCs) system has been recently addressed by high energy physics experiments. In order to meet this requirement, one should have a deeper understanding of the detector physics and the factors that contribute to the intrinsic time resolution of the MRPC, which are studied in this paper. The sources of the timing uncertainties, their influences and the relationship with the detector geometry are analyzed. A comparison between the time resolutions obtained using two different simulation algorithms is presented. The obtained results are useful for the design of the timing MRPCs with an improved performance, and meanwhile offer guidance for the R&D activities in the field.
△ Less
Submitted 12 October, 2019; v1 submitted 7 December, 2018;
originally announced December 2018.
-
Polarization-Selective Control of Nonlinear Optomechanical Interactions in Subwavelength Elliptical Waveguides
Authors:
Dae Seok Han,
Il-Min Lee,
Kyung Hyun Park,
Myeong Soo Kang
Abstract:
Photonic devices exhibiting all-optically reconfigurable polarization dependence with a large dynamic range would be highly attractive for active polarization control. Here, we report that strongly polarization-selective nonlinear optomechanical interactions emerge in subwavelength waveguides. By using full-vectorial finite element analysis, we find that at certain core ellipticities (aspect ratio…
▽ More
Photonic devices exhibiting all-optically reconfigurable polarization dependence with a large dynamic range would be highly attractive for active polarization control. Here, we report that strongly polarization-selective nonlinear optomechanical interactions emerge in subwavelength waveguides. By using full-vectorial finite element analysis, we find that at certain core ellipticities (aspect ratios) the forward simulated light scattering mediated by a specific acoustic mode is eliminated for one polarization mode, whereas that for the other polarization mode is rather enhanced. This intriguing phenomenon can be explained by the interplay between the electrostrictive force and radiation pressure and turns out to be tailorable by choice of waveguide materials.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
High Rate RPC detector for LHC
Authors:
F. Lagarde,
A. Fagot,
M. Gul,
C. Roskas,
M. Tytgat,
N. Zaganidis,
S. Fonseca De Souza,
A. Santoro,
F. Torres Da Silva De Araujo,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Sultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov,
A. Petrov,
S. J. Qian,
D. Han,
W. Yi,
C. Avila,
A. Cabrera
, et al. (77 additional authors not shown)
Abstract:
The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\
{\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The…
▽ More
The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\
{\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The region with high pseudo rapidity ($η$) region of the forward muon spectrometer ($2.4 > |η| > 1.9$) is not equipped with RPC stations. The increase of the expected particles rate up to 2 kHz cm$^{-1}$ ( including a safety factor 3 ) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The current CMS RPC technology cannot sustain the expected background level. A new generation of Glass-RPC (GRPC) using low-resistivity glass was proposed to equip the two most far away of the four high $η$ muon stations of CMS. In their single-gap version they can stand rates of few kHz cm$^{-1}$. Their time precision of about 1 ns can allow to reduce the noise contribution leading to an improvement of the trigger rate. The proposed design for large size chambers is examined and some preliminary results obtained during beam tests at Gamma Irradiation Facility (GIF++) and Super Proton Synchrotron (SPS) at CERN are shown. They were performed to validate the capability of such detectors to support high irradiation environment with limited consequence on their efficiency.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.
-
The study of a new time reconstruction method for MRPC read out by waveform digitizer
Authors:
Fuyue Wang,
Dong Han,
Yi Wang,
Yancheng Yu,
Pengfei Lyu,
Baohong Guo
Abstract:
The measurement of the $K^{\pm}$ production in the Semi-Inclusive Deep Inelastic Scattering (SIDIS) can provide further knowledge about the structure of nucleon, and thus it is purposed in the Solenoidal Large Intensity Device(SoLID) at Jefferson Lab(JLab). In this experiment, the identification of the kaons is planed to be accomplished with the Multi-gap Resistive Plate Chambers(MRPC), and the re…
▽ More
The measurement of the $K^{\pm}$ production in the Semi-Inclusive Deep Inelastic Scattering (SIDIS) can provide further knowledge about the structure of nucleon, and thus it is purposed in the Solenoidal Large Intensity Device(SoLID) at Jefferson Lab(JLab). In this experiment, the identification of the kaons is planed to be accomplished with the Multi-gap Resistive Plate Chambers(MRPC), and the requirement for the time resolution is around 20 $\rm ps$. This is very challenging for the present MRPC systems (typical resolution 60 $\rm ps$), while in this paper, it is proved that the performance can be improved largely if the signal waveform is obtained and analyzed with a neural network method. In a cosmic ray experiment, the time resolution of a 6-gap 0.25$\rm mm$-thick MRPC reaches 36 $\rm ps$ with this method, and a even better performance is expected with a thinner MRPC.
△ Less
Submitted 21 September, 2018; v1 submitted 9 July, 2018;
originally announced July 2018.
-
Status of technology of MRPC time of flight system
Authors:
Yi Wang,
Qiunan Zhang,
Dong Han,
Fuyue Wang,
Yancheng Yu,
Pengfei Lyu,
Yuanjing Li
Abstract:
Time of flight system (TOF) based on MRPC technology is widely used in modern physics experiments, and it also plays an important role in particle identification. With the increase of accelerator energy and luminosity, TOF system is required to indentify definite particles precisely under high rate environment. The MRPC technology TOF system can be defined as three generations. The first generatio…
▽ More
Time of flight system (TOF) based on MRPC technology is widely used in modern physics experiments, and it also plays an important role in particle identification. With the increase of accelerator energy and luminosity, TOF system is required to indentify definite particles precisely under high rate environment. The MRPC technology TOF system can be defined as three generations. The first generation TOF is based on float glass MRPC and its time resolution is around 80ps, but the rate is relatively low (typically lower than 100Hz/cm2). The typical systems are TOF of RHIC-STAR, LHC-ALICE and BES III endcap. For the second generation TOF, its time resolution is in the same order with the first generation, but the rate capability is much higher. Its rate capability can reach 30kHz/cm2. The typical experiment with this high rate TOF is FAIR-CBM. The biggest challenge is on the third generation TOF. For example, the momentum upper limit of K/PI separation is around 7GeV/c for JLab-SoLID TOF system under high particle rate as high as 20kHz/cm2, the time requirement is around 20ps. The readout electronics of first two generations is based on time over threshold method and pulse shape sampling technology will be used in the third generation TOF. In the same time, the machine learning technology is also designed to analysis the time performance. In this paper, we will describe the evolution of MRPC TOF technology and key technology of each generation TOF.
△ Less
Submitted 21 May, 2018;
originally announced May 2018.
-
A neural network based algorithm for MRPC time reconstruction
Authors:
Fuyue Wang,
Dong Han,
Yi Wang,
Yancheng Yu,
Baohong Guo,
Yuanjing Li
Abstract:
Multi-gap Resistive Plate Chamber(MRPC) is a widely used timing detector with a typical time resolution of about 60 ps. This makes MRPC an optimal choice for the time of flight(ToF) system in many large physics experiments. The prior work on improving the time resolution is mainly focused on altering the detector geometry, and therefore the improvement of the data analysis algorithm has not been f…
▽ More
Multi-gap Resistive Plate Chamber(MRPC) is a widely used timing detector with a typical time resolution of about 60 ps. This makes MRPC an optimal choice for the time of flight(ToF) system in many large physics experiments. The prior work on improving the time resolution is mainly focused on altering the detector geometry, and therefore the improvement of the data analysis algorithm has not been fully explored. This paper proposes a new time reconstruction algorithm based on the deep neural networks(NN) and improves the MRPC time resolution by about 10 ps. Since the development of the high energy physics experiments has pushed the timing requirements for the MRPC to a higher level, this algorithm could become a potential substitution of the time over threshold(ToT) method to achieve a time resolution below 30 ps.
△ Less
Submitted 8 May, 2018;
originally announced May 2018.
-
A standalone simulation framework of the MRPC detector read out in waveforms
Authors:
Fuyue Wang,
Dong Han,
Yi Wang,
Yancheng Yu,
Qiunan Zhang,
Baohong Guo,
Yuanjing Li
Abstract:
Dedicated detector simulations are very important for the success of high energy physics experiments. They not only bring benefits to the optimization of the detectors, but can also improve the precision of the physics results. To design a Multi-gap Resistive Plate Chamber (MRPC) with a very good time resolution, a detailed monte-carlo simulation of the detector is needed and described in this pap…
▽ More
Dedicated detector simulations are very important for the success of high energy physics experiments. They not only bring benefits to the optimization of the detectors, but can also improve the precision of the physics results. To design a Multi-gap Resistive Plate Chamber (MRPC) with a very good time resolution, a detailed monte-carlo simulation of the detector is needed and described in this paper. The simulation can produce detector signal waveforms which contain a complete information about the events. The detector performance filled with different gas mixtures is studied, and comparison between simulation and experimental results show a good agreement.
△ Less
Submitted 21 September, 2018; v1 submitted 7 May, 2018;
originally announced May 2018.
-
Designing topological interface states in phononic crystals based on the full phase diagrams
Authors:
Yan Meng,
Xiaoxiao Wu,
Ruo-Yang Zhang,
Xin Li,
Peng Hu,
Lixin Ge,
Yingzhou Huang,
Hong Xiang,
Dezhuan Han,
Shuxia Wang,
Weijia Wen
Abstract:
The topological invariants of a periodic system can be used to define the topological phase of each band and determine the existence of topological interface states within a certain bandgap. Here, we propose a scheme based on the full phase diagrams, and design the topological interface states within any specified bandgaps. As an example, here we propose a kind of one-dimensional phononic crystals…
▽ More
The topological invariants of a periodic system can be used to define the topological phase of each band and determine the existence of topological interface states within a certain bandgap. Here, we propose a scheme based on the full phase diagrams, and design the topological interface states within any specified bandgaps. As an example, here we propose a kind of one-dimensional phononic crystals. By connecting two semi-infinite structures with different topological phases, the interface states within any specific bandgap or their combinations can be achieved in a rational manner. The existence of interface states in a single bandgap, in all odd bandgaps, in all even bandgaps, or in all bandgaps, are verified in simulations and experiments. The scheme of full phase diagrams we introduce here can be extended to other kinds of periodic systems, such as photonic crystals and designer plasmonic crystals.
△ Less
Submitted 28 April, 2018;
originally announced April 2018.
-
Sputtered Gold Nanoparticles Enhanced Quantum Dot Light-emitting Diodes
Authors:
Abida Perveen,
Xin Zhang,
Jialun Tang,
Dengbao Han,
Shuai Chang,
Luogen Deng,
Wenyu Ji,
Haizheng Zhong
Abstract:
Surface plasmonic effects of metallic particles have been known to be an effective method to improve the performance light emitting didoes. In this work, we reported the sputtered Au nanoparticles enhanced electroluminescence in inverted quantum dot light emitting diodes (ITO/Au NPs/ZnMgO/QDs/TFB/PEDOT:PSS/Al). By combining the time-resolved photoluminescence, transient electroluminescence and ult…
▽ More
Surface plasmonic effects of metallic particles have been known to be an effective method to improve the performance light emitting didoes. In this work, we reported the sputtered Au nanoparticles enhanced electroluminescence in inverted quantum dot light emitting diodes (ITO/Au NPs/ZnMgO/QDs/TFB/PEDOT:PSS/Al). By combining the time-resolved photoluminescence, transient electroluminescence and ultraviolet photoelectron spectrometer measurements, the enhancement can be explained to the internal field enhanced exciton coupling to surface plasmons and the increased electron injection rate with Au nanoparticles incorporation. Phenomenological numerical calculations indicated that the electron mobility of the electron transport layer was increased from 1.39x10-5 to 1.91x10-5 cm2/V.s for Au NPs modified devices. As a result, the maximum device luminescence is enhanced by 1.41 folds from 14,600 to 20,720 cd/cm2 and maximum current efficiency is improved by 1.29 folds from 3.12 to 4.02 cd/A.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Wireless Communication in Biosystems
Authors:
Jingjing Xu,
Fan Yang,
Danhong Han,
Shengyong Xu
Abstract:
Electrical signals play the primary role in rapid communication among organs, tissues and cells in biosystems. We have analyzed and discussed three phenomena of electrical communication in biosystems, including direction-changing movement of paramecia, prey behavior of flytraps, and simultaneous discharge of electric ells. These discussions lead to a conclusion that in biosystems the electrical si…
▽ More
Electrical signals play the primary role in rapid communication among organs, tissues and cells in biosystems. We have analyzed and discussed three phenomena of electrical communication in biosystems, including direction-changing movement of paramecia, prey behavior of flytraps, and simultaneous discharge of electric ells. These discussions lead to a conclusion that in biosystems the electrical signals are mainly soliton-like electromagnetic pulses, which are generated by transient transmembrane ion currents through protein ion-channels. These electromagnetic signals mainly propagate along the softmaterial waveguide which is basically composed of dielectric membrane, sandwiched in two ionic liquid layers at both sides. In myelinated axons, the dielectric layer is as thick as several microns as it consists of tens of lipid bilayers. This transmission model implies that a wireless communication mechanism has been naturally developed in biosystem. This hypothesis may shed some light on the working mechanism of ten billion neurons in a human brain.
△ Less
Submitted 10 August, 2017; v1 submitted 8 August, 2017;
originally announced August 2017.
-
Factors Determining the Carrier Distribution in InGaN/GaN Multiple-Quantum-Well Light-Emitting Diodes
Authors:
Dong-Pyo Han,
Jong-In Shim,
Dong-Soo Shin
Abstract:
Factors determining the carrier distribution in InGaN/GaN multiple-quantum-well (MQW) light-emitting diodes (LEDs) are studied via photoluminescence and temperature-dependent electroluminescence spectra. Employing a dichromatic LED device, we demonstrate that the carrier recombination rate should be considered playing an important role in determining the carrier distribution in the MQW active regi…
▽ More
Factors determining the carrier distribution in InGaN/GaN multiple-quantum-well (MQW) light-emitting diodes (LEDs) are studied via photoluminescence and temperature-dependent electroluminescence spectra. Employing a dichromatic LED device, we demonstrate that the carrier recombination rate should be considered playing an important role in determining the carrier distribution in the MQW active region, not just the simple hole characteristics such as low mobility and large effective mass.
△ Less
Submitted 23 May, 2017;
originally announced May 2017.
-
Comparative Analysis of Current Component in InGaN-based Blue and AlGaInP-based Red Light-emitting Diode
Authors:
Dong-Pyo Han,
Jong-In Shim,
Dong-Soo Shin
Abstract:
In this paper, we aim to understand the apparent characteristics of IQE and I-V curve in AlGaInP and InGaN LED devices. For the analysis, we separate the current into radiative current and non-radiative current component by using the information of IQE. We carefully analyze each current component by ideality factor, S parameter, and the modified Shockley diode equation which is suitable for LED de…
▽ More
In this paper, we aim to understand the apparent characteristics of IQE and I-V curve in AlGaInP and InGaN LED devices. For the analysis, we separate the current into radiative current and non-radiative current component by using the information of IQE. We carefully analyze each current component by ideality factor, S parameter, and the modified Shockley diode equation which is suitable for LED device. Through the analyses, it has been found that the characteristics of respective current components are basically similar for both samples while the physical origin of the potential drop induced by radiative current and the amount of double injection current induced non-radiative current by are different. Compared with AlGaInP LEDs, the InGaN LEDs have higher degrees of electron overflow initiated by low recombination rate in active region, causing both the efficiency droop and the higher operating voltage. To remedy this, the radiative recombination rate and/or the active volume should be increased further.
△ Less
Submitted 23 May, 2017;
originally announced May 2017.
-
Origin of Operating Voltage Increase in InGaN-based Light-emitting Diodes under High Injection: Phase Space Filling Effect on Forward Voltage Characteristics
Authors:
Dong-Pyo Han,
Jong-In Shim,
Dong-Soo Shin
Abstract:
As an attempt to further elucidate the operating voltage increase in InGaN-based light-emitting diodes (LEDs), the radiative and nonradiative current components are separately analyzed in combination with the Shockley diode equation. Through the analyses, we have shown that the increase in operating voltage is caused by phase space filling effect in high injection. We have also shown that the clas…
▽ More
As an attempt to further elucidate the operating voltage increase in InGaN-based light-emitting diodes (LEDs), the radiative and nonradiative current components are separately analyzed in combination with the Shockley diode equation. Through the analyses, we have shown that the increase in operating voltage is caused by phase space filling effect in high injection. We have also shown that the classical Shockley diode equation is insufficient to comprehensively explain the I-V curve of the LED devices since the transport and recombination characteristics of respective current components are basically different. Hence, we have proposed a modified Shockley equation suitable for modern LED devices. Our analysis gives a new insight on the cause of the wall-plug-efficiency drop influenced by such factors as the efficiency droop and the high operating voltage in InGaN LEDs.
△ Less
Submitted 16 May, 2017;
originally announced May 2017.
-
Analysis of Carrier Accumulation in Active Region by Energy Loss Mechanisms in InGaN Light-Emitting Diodes
Authors:
Dong-Pyo Han,
Jong-In Shim,
Dong-Soo Shin
Abstract:
Carrier recombination and transport processes play key roles in determining the optoelectronic performances such as the efficiency droop and forward voltage in InGaN/GaN multiple-quantum-well (MQW) light-emitting diodes (LEDs). In this work, we investigate the dominant carrier transport and recombination processes inside and outside the MQW region as a function of injection current from a new poin…
▽ More
Carrier recombination and transport processes play key roles in determining the optoelectronic performances such as the efficiency droop and forward voltage in InGaN/GaN multiple-quantum-well (MQW) light-emitting diodes (LEDs). In this work, we investigate the dominant carrier transport and recombination processes inside and outside the MQW region as a function of injection current from a new point of view by separately examining the carrier energy loss. Analysis of the measurement results reveals that the carrier accumulation and subsequent spill-over from the MQW active region to the clad is the most probable mechanism of explaining the efficiency and forward voltage variation with the injection current.
△ Less
Submitted 16 May, 2017;
originally announced May 2017.
-
Direct Observation of Valley-polarized Topological Edge States in Designer Surface Plasmon Crystals
Authors:
Xiaoxiao Wu,
Yang Meng,
Jingxuan Tian,
Yingzhou Huang,
Hong Xiang,
Dezhuan Han,
Weijia Wen
Abstract:
The extensive research of two-dimensional layered materials has revealed that valleys, as energy extrema in momentum space, could offer a new degree of freedom for carrying information. Based on this concept, researchers have predicted valley-Hall topological insulators which could support valley-polarized edge states at non-trivial domain walls. Recently, several kinds of photonic or sonic crysta…
▽ More
The extensive research of two-dimensional layered materials has revealed that valleys, as energy extrema in momentum space, could offer a new degree of freedom for carrying information. Based on this concept, researchers have predicted valley-Hall topological insulators which could support valley-polarized edge states at non-trivial domain walls. Recently, several kinds of photonic or sonic crystals have been proposed as classical counterparts of valley-Hall topological insulators. However, direct experimental observation of valley-polarized edge states in photonic crystals is still difficult until now. Here, we demonstrate a designer surface plasmon crystal comprising metallic patterns deposited on a dielectric substrate, which can become a valley-Hall photonic topological insulator by exploiting the mirror-symmetry-breaking mechanism. Topological edge states with valley-dependent transport are directly visualized in the microwave regime. The observed edge states are confirmed to be fully valley-polarized through spatial Fourier transforms. Topological protection of the edge states at sharp corners is also experimentally demonstrated.
△ Less
Submitted 19 September, 2017; v1 submitted 14 March, 2017;
originally announced March 2017.
-
Topological phase transition and interface states in hybrid plasmonic-photonic systems
Authors:
Lixin Ge,
Liang Liu,
Meng Xiao,
Guiqiang Du,
Lei Shi,
Dezhuan Han,
C. T. Chan,
Jian Zi
Abstract:
The geometric phase and topological property for one-dimensional hybrid plasmonic-photonic crystals consisting of a simple lattice of graphene sheets are investigated systematically. For transverse magnetic waves, both plasmonic and photonic modes exist in the momentum space. The accidental degeneracy point of these two kinds of modes is identified to be a diabolic point accompanied with a topolog…
▽ More
The geometric phase and topological property for one-dimensional hybrid plasmonic-photonic crystals consisting of a simple lattice of graphene sheets are investigated systematically. For transverse magnetic waves, both plasmonic and photonic modes exist in the momentum space. The accidental degeneracy point of these two kinds of modes is identified to be a diabolic point accompanied with a topological phase transition. For a closed loop around this degeneracy point, the Berry phase is Pi as a consequence of the discontinuous jump of the geometric Zak phase. The wave impedance is calculated analytically for the semi-infinite system, and the corresponding topological interface states either start from or terminate at the degeneracy point. This type of localized interface states may find potential applications in photonics and plasmonics.
△ Less
Submitted 15 March, 2017; v1 submitted 1 March, 2017;
originally announced March 2017.
-
Unidirectional scattering induced by the toroidal dipole moment in the system of plasmonic nanoparticles
Authors:
Lixin Ge,
Liang Liu,
Shiwei Dai,
Jiwang Chai,
Qianju Song,
Hong Xiang,
Dezhuan Han
Abstract:
Unidirectional backward and forward scattering of electromagnetic waves by nanoparticles are usually interpreted as the interference of conventional multipole moments (i.e., electric and magnetic dipole, electric quadrupole, etc.). The role of toroidal dipole moments in unidirectional scattering is generally overlooked. In this work, we investigate the unidirectional scattering for the system of t…
▽ More
Unidirectional backward and forward scattering of electromagnetic waves by nanoparticles are usually interpreted as the interference of conventional multipole moments (i.e., electric and magnetic dipole, electric quadrupole, etc.). The role of toroidal dipole moments in unidirectional scattering is generally overlooked. In this work, we investigate the unidirectional scattering for the system of three plasmonic nanospheres. It is found that the unidirectional backward scattering is caused by the interference between the toroidal dipole moment and other conventional multipole moments. Tunable primary backward and forward scattering can be achieved under some specific configurations. Our results can find applications in the design of nanoantennas.
△ Less
Submitted 12 December, 2016;
originally announced December 2016.