-
Inductive detection of inverse spin-orbit torques in magnetic heterostructures
Authors:
Misbah Yaqoob,
Fabian Kammerbauer,
Tom G. Saunderson,
Vitaliy I. Vasyuchka,
Dongwook Go,
Hassan Al-Hamdo,
Gerhard Jakob,
Yuriy Mokrousov,
Mathias Kläui,
Mathias Weiler
Abstract:
The manipulation of magnetization via Magnetic torques is one of the most important phenomena in spintronics. In thin films, conventionally, a charge current flowing in a heavy metal is used to generate transverse spin currents and to exert torques on the magnetization of an adjacent ferromagnetic thin film layer. Here, in contrast to the typically employed heavy metals, we study spin-to-charge co…
▽ More
The manipulation of magnetization via Magnetic torques is one of the most important phenomena in spintronics. In thin films, conventionally, a charge current flowing in a heavy metal is used to generate transverse spin currents and to exert torques on the magnetization of an adjacent ferromagnetic thin film layer. Here, in contrast to the typically employed heavy metals, we study spin-to-charge conversion in ferromagnetic heterostructures with large spin-orbit interaction that function as the torque-generating layers. In particular, we chose perpendicular magnetic anisotropy (PMA) multilayers [Co/Ni] and [Co/Pt] as the torque-generating layers and drive magnetization dynamics in metallic ferromagnetic thin film $\mathrm{Co_{20}Fe_{60}B_{20}}$ (CoFeB) layers with in-plane magnetic anisotropy (IMA). We investigate the spin dynamics driven by spin-orbit torque (SOT) and the concomitant charge current generation by the inverse SOT process using an inductive technique based on a vector network analyzer. In our experimental findings, we find that the SOTs generated by our multilayers are of a magnitude comparable to those produced by Pt, consistent with first-principles calculations. Furthermore, we noted a significant correlation between the SOT and the thickness of the CoFeB layer.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
(Sub-)picosecond surface correlations of femtosecond laser excited Al-coated multilayers observed by grazing-incidence x-ray scattering
Authors:
Lisa Randolph,
Mohammadreza Banjafar,
Toshinori Yabuuchi,
Carsten Baehtz,
Michael Bussmann,
Nick P. Dover,
Lingen Huang,
Yuichi Inubushi,
Gerhard Jakob,
Mathias Kläui,
Dmitriy Ksenzov,
Mikako Makita,
Kohei Miyanishi,
Mamiko Nishiushi,
Özgül Öztürk,
Michael Paulus,
Alexander Pelka,
Thomas R. Preston,
Jan-Patrick Schwinkendorf,
Keiichi Sueda,
Tadashi Togashi,
Thomas E. Cowan,
Thomas Kluge,
Christian Gutt,
Motoaki Nakatsutsumi
Abstract:
Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In…
▽ More
Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In this study, we show that individual XFEL pulses can elucidate structural changes on surfaces induced by laser-generated plasmas, employing grazing-incidence small-angle x-ray scattering (GISAXS). Using aluminum-coated multilayer samples we can differentiate between ultrafast surface morphology dynamics and subsequent subsurface density dynamics, achieving nanometer-depth sensitivity and subpicosecond temporal resolution. The observed subsurface density dynamics serve to validate advanced simulation models depicting matter under extreme conditions. Our findings promise to unveil novel avenues for laser material nanoprocessing and high-energy-density science.
△ Less
Submitted 26 April, 2024; v1 submitted 23 April, 2024;
originally announced April 2024.
-
Harnessing Orbital Hall Effect in Spin-Orbit Torque MRAM
Authors:
Rahul Gupta,
Chloé Bouard,
Fabian Kammerbauer,
J. Omar Ledesma-Martin,
Iryna Kononenko,
Sylvain Martin,
Gerhard Jakob,
Marc Drouard,
Mathias Kläui
Abstract:
Spin-Orbit Torque (SOT) Magnetic Random-Access Memory (MRAM) devices offer improved power efficiency, nonvolatility, and performance compared to static RAM, making them ideal, for instance, for cache memory applications. Efficient magnetization switching, long data retention, and high-density integration in SOT MRAM require ferromagnets (FM) with perpendicular magnetic anisotropy (PMA) combined wi…
▽ More
Spin-Orbit Torque (SOT) Magnetic Random-Access Memory (MRAM) devices offer improved power efficiency, nonvolatility, and performance compared to static RAM, making them ideal, for instance, for cache memory applications. Efficient magnetization switching, long data retention, and high-density integration in SOT MRAM require ferromagnets (FM) with perpendicular magnetic anisotropy (PMA) combined with large torques enhanced by Orbital Hall Effect (OHE). We have engineered PMA [Co/Ni]$_3$ FM on selected OHE layers (Ru, Nb, Cr) and investigated the potential of theoretically predicted larger orbital Hall conductivity (OHC) to quantify the torque and switching current in OHE/[Co/Ni]$_3$ stacks. Our results demonstrate a $\sim$30\% enhancement in damping-like torque efficiency with a positive sign for the Ru OHE layer compared to a pure Pt, accompanied by a $\sim$20\% reduction in switching current for Ru compared to pure Pt across more than 250 devices, leading to more than a 60\% reduction in switching power. These findings validate the application of Ru in devices relevant to industrial contexts, supporting theoretical predictions regarding its superior OHC. This investigation highlights the potential of enhanced orbital torques to improve the performance of orbital-assisted SOT-MRAM, paving the way for next-generation memory technology.
△ Less
Submitted 3 April, 2024;
originally announced April 2024.
-
Electrical coupling of superparamagnetic tunnel junctions mediated by spin-transfer-torques
Authors:
Leo Schnitzspan,
Mathias Kläui,
Gerhard Jakob
Abstract:
In this work, the effect of electrical coupling on stochastic switching of two in-plane superparamagnetic tunnel junctions (SMTJs) is studied, using experimental measurements as well as simulations. The coupling mechanism relies on the spin-transfer-torque (STT) effect, which enables the manipulation of the state probability of an SMTJ. Through the investigation of time-lagged cross-correlation, t…
▽ More
In this work, the effect of electrical coupling on stochastic switching of two in-plane superparamagnetic tunnel junctions (SMTJs) is studied, using experimental measurements as well as simulations. The coupling mechanism relies on the spin-transfer-torque (STT) effect, which enables the manipulation of the state probability of an SMTJ. Through the investigation of time-lagged cross-correlation, the strength and direction of the coupling are determined. In particular, the characteristic state probability transfer curve of each SMTJ leads to the emergence of a similarity or dissimilarity effect. The cross-correlation as a function of applied source voltage reveals that the strongest coupling occurs for high positive voltages for our SMTJs. In addition, we show state tuneability as well as coupling control by the applied voltage. The experimental findings of the cross-correlation are in agreement with our simulation results.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Fiber-tip spintronic terahertz emitters
Authors:
Felix Paries,
Nicolas Tiercelin,
Geoffrey Lezier,
Mathias Vanwolleghem,
Felix Selz,
Maria-Andromachi Syskaki,
Fabian Kammerbauer,
Gerhard Jakob,
Martin Jourdan,
Mathias KlÄui,
Zdenek Kaspar,
Tobias Kampfrath,
Tom S. Seifert,
Georg Von Freymann,
Daniel Molter
Abstract:
Spintronic terahertz emitters promise terahertz sources with an unmatched broad frequency bandwidth that are easy to fabricate and operate, and therefore easy to scale at low cost. However, current experiments and proofs of concept rely on free-space ultrafast pump lasers and rather complex benchtop setups. This contrasts with the requirements of widespread industrial applications, where robust, c…
▽ More
Spintronic terahertz emitters promise terahertz sources with an unmatched broad frequency bandwidth that are easy to fabricate and operate, and therefore easy to scale at low cost. However, current experiments and proofs of concept rely on free-space ultrafast pump lasers and rather complex benchtop setups. This contrasts with the requirements of widespread industrial applications, where robust, compact, and safe designs are needed. To meet these requirements, we present a novel fiber-tip spintronic terahertz emitter solution that allows spintronic terahertz systems to be fully fiber-coupled. Using single-mode fiber waveguiding, the newly developed solution naturally leads to a simple and straightforward terahertz near-field imaging system with a 90%-10% knife-edge-response spatial resolution of 30 $μm$.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Single device offset-free magnetic field sensing principle with tunable sensitivity and linear range based on spin-orbit-torques
Authors:
Sabri Koraltan,
Christin Schmitt,
Florian Bruckner,
Claas Abert,
Klemens Prügl,
Michael Kirsch,
Rahul Gupta,
Sebastian Zeilinger,
Joshua M. Salazar-Mejía,
Milan Agrawal,
Johannes Güttinger,
Armin Satz,
Gerhard Jakob,
Mathias Kläui,
Dieter Suess
Abstract:
We propose a novel device concept using spin-orbit-torques to realize a magnetic field sensor, where we eliminate the sensor offset using a differential measurement concept. We derive a simple analytical formulation for the sensor signal and demonstrate its validity with numerical investigations using macrospin simulations. The sensitivity and the measurable linear sensing range in the proposed co…
▽ More
We propose a novel device concept using spin-orbit-torques to realize a magnetic field sensor, where we eliminate the sensor offset using a differential measurement concept. We derive a simple analytical formulation for the sensor signal and demonstrate its validity with numerical investigations using macrospin simulations. The sensitivity and the measurable linear sensing range in the proposed concept can be tuned by either varying the effective magnetic anisotropy or by varying the magnitude of the injected currents. We show that undesired perturbation fields normal to the sensitive direction preserve the zero-offset property and only slightly modulate the sensitivity of the proposed sensor. Higher-harmonics voltage analysis on a Hall cross experimentally confirms the linearity and tunability via current strength. Additionally, the sensor exhibits a non-vanishing offset in the experiment which we attribute to the anomalous Nernst effect.
△ Less
Submitted 23 March, 2023;
originally announced March 2023.
-
Optimization of Permalloy properties for magnetic field sensors using He$^+$ irradiation
Authors:
Giovanni Masciocchi,
Johannes Wilhelmus van der Jagt,
Maria-Andromachi Syskaki,
Jürgen Langer,
Gerhard Jakob,
Jeffrey McCord,
Benjamin Borie,
Andreas Kehlberger,
Dafine Ravelosona,
Mathias Kläui
Abstract:
Permalloy, despite being a widely utilized soft magnetic material, still calls for optimization in terms of magnetic softness and magnetostriction for its use in magnetoresistive sensor applications. Conventional annealing methods are often insufficient to locally achieve the desired properties for a narrow parameter range. In this study, we report a significant improvement of the magnetic softnes…
▽ More
Permalloy, despite being a widely utilized soft magnetic material, still calls for optimization in terms of magnetic softness and magnetostriction for its use in magnetoresistive sensor applications. Conventional annealing methods are often insufficient to locally achieve the desired properties for a narrow parameter range. In this study, we report a significant improvement of the magnetic softness and magnetostriction in a 30 nm Permalloy film after He$^+$ irradiation. Compared to the as-deposited state, the irradiation treatment reduces the induced anisotropy by a factor ten and the hard axis coercivity by a factor five. In addition, the effective magnetostriction of the film is significantly reduced by a factor ten - below $1\times10^{-7}$ - after irradiation. All the above mentioned effects can be attributed to the isotropic crystallite growth of the Ni-Fe alloy and to the intermixing at the magnetic layer interfaces under light ion irradiation. We support our findings with X-ray diffraction analysis of the textured Ni$_{81}$Fe$_{19}$ alloy. Importantly, the sizable magnetoresistance is preserved after the irradiation. Our results show that compared to traditional annealing methods, the use of He$^+$ irradiation leads to significant improvements in the magnetic softness and reduces strain cross sensitivity in Permalloy films required for 3D positioning and compass applications. These improvements, in combination with the local nature of the irradiation process make our finding valuable for the optimization of monolithic integrated sensors, where classic annealing methods cannot be applied due to complex interplay within the components in the device.
△ Less
Submitted 2 March, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
Control of magnetoelastic coupling in Ni/Fe multilayers using He$^+$ ion irradiation
Authors:
Giovanni Masciocchi,
Johannes Wilhelmus van der Jagt,
Maria-Andromachi Syskaki,
Alessio Lamperti,
Niklas Wolff,
Andriy Lotnyk,
Jürgen Langer,
Lorenz Kienle,
Gerhard Jakob,
Benjamin Borie,
Andreas Kehlberger,
Dafine Ravelosona,
Mathias Kläui
Abstract:
This study reports the effects of post-growth He$^+$ irradiation on the magneto-elastic properties of a $Ni$ /$Fe$ multi-layered stack. The progressive intermixing caused by He$^+$ irradiation at the interfaces of the multilayer allows us to tune the saturation magnetostriction value with increasing He$^+$ fluences, and even to induce a reversal of the sign of the magnetostrictive effect. Addition…
▽ More
This study reports the effects of post-growth He$^+$ irradiation on the magneto-elastic properties of a $Ni$ /$Fe$ multi-layered stack. The progressive intermixing caused by He$^+$ irradiation at the interfaces of the multilayer allows us to tune the saturation magnetostriction value with increasing He$^+$ fluences, and even to induce a reversal of the sign of the magnetostrictive effect. Additionally, the critical fluence at which the absolute value of the magnetostriction is dramatically reduced is identified. Therefore insensitivity to strain of the magnetic stack is nearly reached, as required for many applications. All the above mentioned effects are attributed to the combination of the negative saturation magnetostriction of sputtered Ni, Fe layers and the positive magnetostriction of the Ni$_{x}$Fe$_{1-x}$ alloy at the intermixed interfaces, whose contribution is gradually increased with irradiation. Importantly the irradiation does not alter the layers polycrystalline structure, confirming that post-growth He$^+$ ion irradiation is an excellent tool to tune the magneto-elastic properties of magnetic samples. A new class of spintronic devices can be envisioned with a material treatment able to arbitrarily change the magnetostriction with ion-induced "magnetic patterning".
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Average power scaling of THz spintronic emitters in reflection geometry
Authors:
Tim Vogel,
Alan Omar,
Samira Mansourzadeh,
Frank Wulf,
Natalia Martín Sabanés,
Melanie Müller,
Tom S. Seifert,
Alexander Weigel,
Gerhard Jakob,
Mathias Kläui,
Ioachim Pupeza,
Tobias Kampfrath,
Clara J. Saraceno
Abstract:
Metallic spintronic THz emitters have become well-established for offering ultra-broadband, gap-less THz emission in a variety of excitation regimes, in combination with reliable fabrication and excellent scalability. However, so far, their potential for high-average-power excitation to reach strong THz fields at high repetition rates has not been thoroughly investigated. In this article, we explo…
▽ More
Metallic spintronic THz emitters have become well-established for offering ultra-broadband, gap-less THz emission in a variety of excitation regimes, in combination with reliable fabrication and excellent scalability. However, so far, their potential for high-average-power excitation to reach strong THz fields at high repetition rates has not been thoroughly investigated. In this article, we explore the power scaling behavior of tri-layer spintronic emitters using an Yb-fiber excitation source, delivering an average power of 18.5 W at 400 kHz repetition rate, temporally compressed to a pulse duration of 27 fs. We confirm that the reflection geometry with back-side cooling is ideally suited for these emitters in the high-average-power excitation regime. In order to understand limiting mechanisms, we disentangle the effects on THz power generation by average power and pulse energy, by varying the repetition rate of the laser. Our results show that the conversion efficiency remains mostly dependent on the incident fluence in this high-average-power, high-repetition-rate excitation regime if the emitters are efficiently cooled. Using these findings, we optimize the conversion efficiency to reach 5e-6 at highest excitation powers in the back-cooled reflection geometry. Our findings provide guidelines for scaling the power of THz radiation emitted by spintronic emitters to the mW-level by using state-of-the-art femtosecond sources with multi-hundred-Watt average power to reach ultra-broadband, strong-field THz sources with high repetition rate.
△ Less
Submitted 12 January, 2022; v1 submitted 17 December, 2021;
originally announced December 2021.
-
Thermally induced all-optical ferromagnetic resonance in thin YIG films
Authors:
E. Schmoranzerová,
J. Kimák,
R. Schlitz,
S. T. B. Goennenwein,
D. Kriegner,
H. Reichlová,
Z. Šobáň,
G. Jakob,
E. -J. Guo,
M. Kläui,
M. Münzenberg,
P. Němec,
T. Ostatnický
Abstract:
All-optical ferromagnetic resonance (AO-FMR) is a powerful tool for local detection of micromagnetic parameters, such as magnetic anisotropy, Gilbert damping or spin stiffness. In this work we demonstrate that the AO-FMR method can be used in thin films of Yttrium Iron Garnet (YIG) if a metallic capping layer (Au, Pt) is deposited on top of the film. Magnetization precession is triggered by heatin…
▽ More
All-optical ferromagnetic resonance (AO-FMR) is a powerful tool for local detection of micromagnetic parameters, such as magnetic anisotropy, Gilbert damping or spin stiffness. In this work we demonstrate that the AO-FMR method can be used in thin films of Yttrium Iron Garnet (YIG) if a metallic capping layer (Au, Pt) is deposited on top of the film. Magnetization precession is triggered by heating of the metallic layer with femtosecond laser pulses. The heating modifies the magneto-crystalline anisotropy of the YIG film and shifts the quasi-equilibrium orientation of magnetization, which results in precessional magnetization dynamics. The laser-induced magnetization precession corresponds to a uniform (Kittel) magnon mode, with the precession frequency determined by the magnetic anisotropy of the material as well as the external magnetic field, and the damping time set by a Gilbert damping parameter. The AO-FMR method thus enables measuring local magnetic properties, with spatial resolution given only by the laser spot size.
△ Less
Submitted 31 October, 2021;
originally announced November 2021.
-
Giant quadratic magneto-optical response of thin YIG films for sensitive magnetometric experiments
Authors:
E. Schmoranzerová,
T. Ostatnický,
J. Kimák,
D. Kriegner,
H. Reichlová,
R. Schlitz,
A. Baďura,
Z. Šobáň,
M. Münzenberg,
G. Jakob,
E. -J. Guo,
M. Kläui,
P. Němec
Abstract:
We report on observation of a magneto-optical effect quadratic in magnetization (Cotton-Mouton effect) in 50 nm thick layer of Yttrium-Iron Garnet (YIG). By a combined theoretical and experimental approach, we managed to quantify both linear and quadratic magneto-optical effects. We show that the quadratic magneto-optical signal in the thin YIG film can exceed the linear magneto-optical response,…
▽ More
We report on observation of a magneto-optical effect quadratic in magnetization (Cotton-Mouton effect) in 50 nm thick layer of Yttrium-Iron Garnet (YIG). By a combined theoretical and experimental approach, we managed to quantify both linear and quadratic magneto-optical effects. We show that the quadratic magneto-optical signal in the thin YIG film can exceed the linear magneto-optical response, reaching values of 450 urad that are comparable with Heusler alloys or ferromagnetic semiconductors. Furthermore, we demonstrate that a proper choice of experimental conditions, particularly with respect to the wavelength, is crucial for optimization of the quadratic magneto-optical effect for magnetometry measurement.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
Nanoscale subsurface dynamics of solids upon high-intensity laser irradiation observed by femtosecond grazing-incidence x-ray scattering
Authors:
Lisa Randolph,
Mohammadreza Banjafar,
Thomas R. Preston,
Toshinori Yabuuchi,
Mikako Makita,
Nicholas P. Dover,
Christian Rödel,
Sebastian Göde,
Yuichi Inubushi,
Gerhard Jakob,
Johannes Kaa,
Akira Kon,
James K. Koga,
Dmitriy Ksenzov,
Takeshi Matsuoka,
Mamiko Nishiuchi,
Michael Paulus,
Frederic Schon,
Keiichi Sueda,
Yasuhiko Sentoku,
Tadashi Togashi,
Mehran Vafaee-Khanjani,
Michael Bussmann,
Thomas E. Cowan,
Mathias Kläui
, et al. (6 additional authors not shown)
Abstract:
Observing ultrafast laser-induced structural changes in nanoscale systems is essential for understanding the dynamics of intense light-matter interactions. For laser intensities on the order of $10^{14} \, \rm W/cm^2$, highly-collisional plasmas are generated at and below the surface. Subsequent transport processes such as heat conduction, electron-ion thermalization, surface ablation and resolidi…
▽ More
Observing ultrafast laser-induced structural changes in nanoscale systems is essential for understanding the dynamics of intense light-matter interactions. For laser intensities on the order of $10^{14} \, \rm W/cm^2$, highly-collisional plasmas are generated at and below the surface. Subsequent transport processes such as heat conduction, electron-ion thermalization, surface ablation and resolidification occur at picosecond and nanosecond time scales. Imaging methods, e.g. using x-ray free-electron lasers (XFEL), were hitherto unable to measure the depth-resolved subsurface dynamics of laser-solid interactions with appropriate temporal and spatial resolution. Here we demonstrate picosecond grazing-incidence small-angle x-ray scattering (GISAXS) from laser-produced plasmas using XFEL pulses. Using multi-layer (ML) samples, both the surface ablation and subsurface density dynamics are measured with nanometer depth resolution. Our experimental data challenges the state-of-the-art modeling of matter under extreme conditions and opens new perspectives for laser material processing and high-energy-density science.
△ Less
Submitted 8 October, 2021; v1 submitted 30 December, 2020;
originally announced December 2020.
-
Rapid online solid-state battery diagnostics with optically pumped magnetometers
Authors:
Yinan Hu,
Geoffrey Z. Iwata,
Lykourgos Bougas,
John W. Blanchard,
Arne Wickenbrock,
Gerhard Jakob,
Stephan Schwarz,
Clemens Schwarzinger,
Alexej Jerschow,
Dmitry Budker
Abstract:
Solid state battery technology is motivated by the desire to deliver flexible power storage in a safe and efficient manner. The increasingly widespread use of batteries from mass-production facilities highlights the need for a rapid and sensitive diagnostic for identifying battery defects. We demonstrate the use of atomic magnetometry to measure the magnetic fields around miniature solid-state bat…
▽ More
Solid state battery technology is motivated by the desire to deliver flexible power storage in a safe and efficient manner. The increasingly widespread use of batteries from mass-production facilities highlights the need for a rapid and sensitive diagnostic for identifying battery defects. We demonstrate the use of atomic magnetometry to measure the magnetic fields around miniature solid-state battery cells. These fields encode information about battery manufacturing defects, state of charge, impurities, or can provide important insights into ageing processes. Compared with SQUID-based magnetometry, the availability of atomic magnetometers, however, highlights the possibility for a low-cost, portable, and flexible implementation of battery quality-control and characterization technology.
△ Less
Submitted 5 October, 2020;
originally announced October 2020.
-
Electric-field control of spin-orbit torques in perpendicularly magnetized W/CoFeB/MgO films
Authors:
Mariia Filianina,
Jan-Philipp Hanke,
Kyujoon Lee,
Dong-Soo Han,
Samridh Jaiswal,
Gerhard Jakob,
Yuriy Mokrousov,
Mathias Kläui
Abstract:
Controlling magnetism by electric fields offers a highly attractive perspective for designing future generations of energy-efficient information technologies. Here, we demonstrate that the magnitude of current-induced spin-orbit torques in thin perpendicularly magnetized CoFeB films can be tuned and even increased by electric field generated piezoelectric strain. Using theoretical calculations, we…
▽ More
Controlling magnetism by electric fields offers a highly attractive perspective for designing future generations of energy-efficient information technologies. Here, we demonstrate that the magnitude of current-induced spin-orbit torques in thin perpendicularly magnetized CoFeB films can be tuned and even increased by electric field generated piezoelectric strain. Using theoretical calculations, we uncover that the subtle interplay of spin-orbit coupling, crystal symmetry, and orbital polarization is at the core of the observed strain dependence of spin-orbit torques. Our results open a path to integrating two energy efficient spin manipulation approaches, the electric field-induced strain and the current-induced magnetization switching, thereby enabling novel device concepts.
△ Less
Submitted 16 February, 2020;
originally announced February 2020.
-
Impact of pump wavelength on terahertz emission of a cavity-enhanced spintronic trilayer
Authors:
Rosamund I. Herapath,
Sam M. Hornett,
T. Seifert,
Gerhard Jakob,
Mathias Kläui,
Jacopo Bertolotti,
T. Kampfrath,
Euan Hendry
Abstract:
We systematically study the pump-wavelength dependence of terahertz pulse generation in thin-film spintronic THz emitters composed of a ferromagnetic Fe layer between adjacent nonmagnetic W and Pt layers. We find that the efficiency of THz generation is essentially at for excitation by 150 fs pulses with center wavelengths ranging from 900 to 1500 nm, demonstrating that the spin current does not d…
▽ More
We systematically study the pump-wavelength dependence of terahertz pulse generation in thin-film spintronic THz emitters composed of a ferromagnetic Fe layer between adjacent nonmagnetic W and Pt layers. We find that the efficiency of THz generation is essentially at for excitation by 150 fs pulses with center wavelengths ranging from 900 to 1500 nm, demonstrating that the spin current does not depend strongly on the pump photon energy. We show that the inclusion of dielectric overlayers of TiO2 and SiO2, designed for a particular excitation wavelength, can enhance the terahertz emission by a factor of of up to two in field.
△ Less
Submitted 2 August, 2018;
originally announced August 2018.
-
Thermal skyrmion diffusion applied in probabilistic computing
Authors:
Jakub Zázvorka,
Florian Jakobs,
Daniel Heinze,
Niklas Keil,
Sascha Kromin,
Samridh Jaiswal,
Kai Litzius,
Gerhard Jakob,
Peter Virnau,
Daniele Pinna,
Karin Everschor-Sitte,
Andreas Donges,
Ulrich Nowak,
Mathias Kläui
Abstract:
Thermally activated processes are key to understanding the dynamics of physical systems. Thermal diffusion of (quasi-)particles for instance not only yields information on transport and dissipation processes but is also an exponentially sensitive tool to reveal emergent system properties and enable novel applications such as probabilistic computing. Here we probe the thermal dynamics of topologica…
▽ More
Thermally activated processes are key to understanding the dynamics of physical systems. Thermal diffusion of (quasi-)particles for instance not only yields information on transport and dissipation processes but is also an exponentially sensitive tool to reveal emergent system properties and enable novel applications such as probabilistic computing. Here we probe the thermal dynamics of topologically stabilized magnetic skyrmion quasi-particles. We demonstrate in a specially tailored low pinning multilayer material system pure skyrmion diffusion that dominates the dynamics. Finally, we analyse the applicability to probabilistic computing by constructing a device, which uses the thermally excited skyrmion dynamics to reshuffle a signal. Such a skyrmion reshuffler is the key missing component for probabilistic computing and by evaluating its performance, we demonstrate the functionality of our device with high fidelity thus enabling probabilistic computing.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
High-Performance Flexible Magnetic Tunnel Junctions for Smart Miniaturized Instruments
Authors:
Selma. Amara,
Gallo. A. Torres Sevilla,
Mayyada. Hawsawi,
Yousof. Mashraei,
Hanan . Mohammed,
Melvin E. Cruz,
Yurii. P. Ivanov,
Samridh. Jaiswal,
Gerhard. Jakob,
Mathias. Kläui,
Muhammad. Hussain,
Jurgen. Kosel
Abstract:
Flexible electronics is an emerging field in many applications ranging from in vivo biomedical devices to wearable smart systems. The capability of conforming to curved surfaces opens the door to add electronic components to miniaturized instruments, where size and weight are critical parameters. Given their prevalence on the sensors market, flexible magnetic sensors play a major role in this prog…
▽ More
Flexible electronics is an emerging field in many applications ranging from in vivo biomedical devices to wearable smart systems. The capability of conforming to curved surfaces opens the door to add electronic components to miniaturized instruments, where size and weight are critical parameters. Given their prevalence on the sensors market, flexible magnetic sensors play a major role in this progress. For many high-performance applications, magnetic tunnel junctions (MTJs) have become the first choice, due to their high sensitivity, low power consumption etc. MTJs are also promising candidates for non-volatile next-generation data storage media and, hence, could become central components of wearable electronic devices. In this work, a generic low-cost regenerative batch fabrication process is utilized to transform rigid MTJs on a 500 μm silicon wafer substrate into 5 μm thin, mechanically flexible silicon devices, and ensuring optimal utilization of the whole substrate. This method maintains the outstanding magnetic properties, which are only obtained by deposition of the MTJ on smooth high-quality silicon wafers. The flexible MTJs are highly reliable and resistive to mechanical stress. Bending of the MTJ stacks with a diameter as small as 500 μm is possible without compromising their performance and an endurance of over 1000 cycles without fatigue has been demonstrated. The flexible MTJs were mounted onto the tip of a cardiac catheter with 2 mm in diameter without compromising their performance. This enables the detection of magnetic fields and the angle which they are applied at with a high sensitivity of 4.93 %/Oe and a low power consumption of 0.15 μW, while adding only 8 μg and 15 μm to the weight and diameter of the catheter, respectively.
△ Less
Submitted 4 April, 2018;
originally announced April 2018.
-
Ultrabroadband single-cycle terahertz pulses with peak fields of 300 kV cm$^{-1}$ from a metallic spintronic emitter
Authors:
T. Seifert,
S. Jaiswal,
M. Sajadi,
G. Jakob,
S. Winnerl,
M. Wolf,
M. Kläui,
T. Kampfrath
Abstract:
To explore the capabilities of metallic spintronic thin-film stacks as a source of intense and broadband terahertz electromagnetic fields, we excite a W/CoFeB/Pt trilayer on a large-area glass substrate (diameter of 7.5 cm) by a femtosecond laser pulse (energy 5.5 mJ, duration 40 fs, wavelength 800 nm). After focusing, the emitted terahertz pulse is measured to have a duration of 230 fs, a peak fi…
▽ More
To explore the capabilities of metallic spintronic thin-film stacks as a source of intense and broadband terahertz electromagnetic fields, we excite a W/CoFeB/Pt trilayer on a large-area glass substrate (diameter of 7.5 cm) by a femtosecond laser pulse (energy 5.5 mJ, duration 40 fs, wavelength 800 nm). After focusing, the emitted terahertz pulse is measured to have a duration of 230 fs, a peak field of 300 kV cm$^{-1}$ and an energy of 5 nJ. In particular, the waveform exhibits a gapless spectrum extending from 1 to 10 THz at 10% of amplitude maximum, thereby facilitating nonlinear control over matter in this difficult-to-reach frequency range and on the sub-picosecond time scale.
△ Less
Submitted 29 March, 2017;
originally announced March 2017.
