Showing 1–25 of 25 results for author: Jana, S

Tunneling-like wave transmission in non-Hermitian lattices with mirrored nonreciprocity

Authors: Sayan Jana, Lea Sirota

Abstract: We report a peculiar tunneling phenomenon that occurs in lattices with nonreciprocal inter-site couplings. The nonreciprocity holds for an inner portion of the lattice, constituting a non-Hermitian interface between outer Hermitian sections. The couplings are mirrored about the interface center, with the smaller strength directed outwards. As a standalone system that was widely studied in recent y… ▽ More We report a peculiar tunneling phenomenon that occurs in lattices with nonreciprocal inter-site couplings. The nonreciprocity holds for an inner portion of the lattice, constituting a non-Hermitian interface between outer Hermitian sections. The couplings are mirrored about the interface center, with the smaller strength directed outwards. As a standalone system that was widely studied in recent years, each section of the interface supports the non-Hermitian skin effect, in which modes are accumulated at the boundary of the weaker coupling. Here, we investigate what happens to a wave that propagates along the lattice and hits the interface. The skin mode accumulation, which effectively constitutes a barrier, forbids wave penetration into the interface, but surprisingly, under certain conditions the wave is transmitted to the other side, keeping the interface dark, as if the wave invisibly tunneled through it. Remarkably, the tunneling is independent of the interface length. We derive the phenomenon both for quantum and classical systems, and realize it experimentally in an active topoelectric metamaterial. Our study fosters the research of wave tunneling through other types of non-Hermitian interfaces, which may also include nonlinearities, time-dependence and more. △ Less

Submitted 29 May, 2024; v1 submitted 17 December, 2023; originally announced December 2023.

Adiabatic connection interaction strength interpolation method made accurate for the uniform electron gas

Authors: Lucian A. Constantin, Subrata Jana, Szymon Śmiga, Fabio Della Sala

Abstract: The adiabatic connection interaction strength interpolation (ISI)-like method provides a high-level expression for the correlation energy, being in principle exact in the weak-interaction limit, where it recovers the second-order Görling-Levy perturbation term, but also in the strong-interaction limit that is described by the strictly correlated electron approach. In this work, we construct the ge… ▽ More The adiabatic connection interaction strength interpolation (ISI)-like method provides a high-level expression for the correlation energy, being in principle exact in the weak-interaction limit, where it recovers the second-order Görling-Levy perturbation term, but also in the strong-interaction limit that is described by the strictly correlated electron approach. In this work, we construct the genISI functional made accurate for the uniform electron gas, a solid-state physics paradigm that is a very difficult test for ISI-like correlation functionals. We assess the genISI functional for various jellium spheres with the number of electrons Z $\leq$ 912 and for the non-relativistic noble atoms with Z $\leq$ 290. For the jellium clusters, the genISI is remarkably accurate, while for the noble atoms, it shows a good performance, similar to other ISI-like methods. Then, the genISI functional can open the path using the ISI-like method in solid-state calculations. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Towards a Muon Collider

Authors: Carlotta Accettura, Dean Adams, Rohit Agarwal, Claudia Ahdida, Chiara Aimè, Nicola Amapane, David Amorim, Paolo Andreetto, Fabio Anulli, Robert Appleby, Artur Apresyan, Aram Apyan, Sergey Arsenyev, Pouya Asadi, Mohammed Attia Mahmoud, Aleksandr Azatov, John Back, Lorenzo Balconi, Laura Bandiera, Roger Barlow, Nazar Bartosik, Emanuela Barzi, Fabian Batsch, Matteo Bauce, J. Scott Berg , et al. (272 additional authors not shown)

Abstract: A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi… ▽ More A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work. △ Less

Submitted 27 November, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Comments: 118 pages, 103 figures

Thermal-Carrier-Escape Mitigation in a Quantum-Dot-In-Perovskite Intermediate Band Solar Cell via Bandgap Engineering

Authors: Ugur D. Menda, Guilherme Ribeiro, Jonas Deuermeier, Esther López, Daniela Nunes, Santanu Jana, Irene Artacho, Rodrigo Martins, Iván Mora-Seró, Manuel J. Mendes, Iñigo Ramiro

Abstract: By harvesting a wider range of the solar spectrum, intermediate band solar cells (IBSCs) can achieve efficiencies 50% higher than conventional single-junction solar cells. For this, additional requirements are imposed to the light-absorbing semiconductor, which must contain a collection of in-gap levels, called intermediate band (IB), optically coupled to but thermally decoupled from the valence a… ▽ More By harvesting a wider range of the solar spectrum, intermediate band solar cells (IBSCs) can achieve efficiencies 50% higher than conventional single-junction solar cells. For this, additional requirements are imposed to the light-absorbing semiconductor, which must contain a collection of in-gap levels, called intermediate band (IB), optically coupled to but thermally decoupled from the valence and conduction bands (VB and CB). Quantum-dot-in-perovskite (QDiP) solids, where inorganic quantum dots (QDs) are embedded in a halide perovskite matrix, have been recently suggested as a promising material platform for developing IBSCs. In this work, QDiP solids with excellent morphological and structural quality and strong absorption and emission related to the presence of in-gap QD levels are synthesized. With them, QDiP-based IBSCs are fabricated and, by means of temperature-dependent photocurrent measurements, it is shown that the IB is strongly thermally decoupled from the valence and conduction bands. The activation energy of the IB$\rightarrow$CB thermal escape of electrons is measured to be 204 meV, resulting in the mitigation of this detrimental process even under room-temperature operation, thus fulfilling the first mandatory requisite to enable high-efficiency IBSCs. △ Less

Submitted 26 February, 2023; originally announced February 2023.

Journal ref: ACS Photonics 2023, 10, 10, 3647-3655

The Forward Physics Facility at the High-Luminosity LHC

Authors: Jonathan L. Feng, Felix Kling, Mary Hall Reno, Juan Rojo, Dennis Soldin, Luis A. Anchordoqui, Jamie Boyd, Ahmed Ismail, Lucian Harland-Lang, Kevin J. Kelly, Vishvas Pandey, Sebastian Trojanowski, Yu-Dai Tsai, Jean-Marco Alameddine, Takeshi Araki, Akitaka Ariga, Tomoko Ariga, Kento Asai, Alessandro Bacchetta, Kincso Balazs, Alan J. Barr, Michele Battistin, Jianming Bian, Caterina Bertone, Weidong Bai , et al. (211 additional authors not shown)

Abstract: High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Mod… ▽ More High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Comments: 429 pages, contribution to Snowmass 2021

Report number: UCI-TR-2022-01, CERN-PBC-Notes-2022-001, FERMILAB-PUB-22-094-ND-SCD-T, INT-PUB-22-006, BONN-TH-2022-04

The Forward Physics Facility: Sites, Experiments, and Physics Potential

Authors: Luis A. Anchordoqui, Akitaka Ariga, Tomoko Ariga, Weidong Bai, Kincso Balazs, Brian Batell, Jamie Boyd, Joseph Bramante, Mario Campanelli, Adrian Carmona, Francesco G. Celiberto, Grigorios Chachamis, Matthew Citron, Giovanni De Lellis, Albert De Roeck, Hans Dembinski, Peter B. Denton, Antonia Di Crecsenzo, Milind V. Diwan, Liam Dougherty, Herbi K. Dreiner, Yong Du, Rikard Enberg, Yasaman Farzan, Jonathan L. Feng , et al. (56 additional authors not shown)

Abstract: The Forward Physics Facility (FPF) is a proposal to create a cavern with the space and infrastructure to support a suite of far-forward experiments at the Large Hadron Collider during the High Luminosity era. Located along the beam collision axis and shielded from the interaction point by at least 100 m of concrete and rock, the FPF will house experiments that will detect particles outside the acc… ▽ More The Forward Physics Facility (FPF) is a proposal to create a cavern with the space and infrastructure to support a suite of far-forward experiments at the Large Hadron Collider during the High Luminosity era. Located along the beam collision axis and shielded from the interaction point by at least 100 m of concrete and rock, the FPF will house experiments that will detect particles outside the acceptance of the existing large LHC experiments and will observe rare and exotic processes in an extremely low-background environment. In this work, we summarize the current status of plans for the FPF, including recent progress in civil engineering in identifying promising sites for the FPF and the experiments currently envisioned to realize the FPF's physics potential. We then review the many Standard Model and new physics topics that will be advanced by the FPF, including searches for long-lived particles, probes of dark matter and dark sectors, high-statistics studies of TeV neutrinos of all three flavors, aspects of perturbative and non-perturbative QCD, and high-energy astroparticle physics. △ Less

Submitted 25 May, 2022; v1 submitted 22 September, 2021; originally announced September 2021.

Comments: revised version, accepted by Physics Reports

Report number: BNL-222142-2021-FORE, CERN-PBC-Notes-2021-025, DESY-21-142, FERMILAB-CONF-21-452-AE-E-ND-PPD-T, KYUSHU-RCAPP-2021-01, LU TP 21-36, PITT-PACC-2118, SMU-HEP-21-10, UCI-TR-2021-22

Journal ref: Phys. Rept. 968 (2022), 1-50

One-pot Liquid-Phase Synthesis of MoS$_2$-WS$_2$ van der Waals Heterostructures for Broadband Photodetection

Authors: Shaona Bose, Subhrajit Mukherjee, Subhajit Jana, Sanjeev Kumar Srivastava, Samit Kumar Ray

Abstract: Two dimensional (2D) van der Waals heterostructures (vdWHs) have their unique potential in facilitating the stacking of layers of different 2D materials for optoelectronic devices with superior characteristics at a reduced cost. However, the fabrication of large area all-2D heterostructures is still challenging towards realizing practical devices. In the present work, we have demonstrated a rapid… ▽ More Two dimensional (2D) van der Waals heterostructures (vdWHs) have their unique potential in facilitating the stacking of layers of different 2D materials for optoelectronic devices with superior characteristics at a reduced cost. However, the fabrication of large area all-2D heterostructures is still challenging towards realizing practical devices. In the present work, we have demonstrated a rapid yet simple, impurity free and highly efficient sonication-assisted chemical exfoliation approach to synthesize hybrid vdWHs based on 2D molybdenum disulphide (MoS$_2$) and tungsten disulphide (WS$_2$), with high yield. Microscopic and spectroscopic studies have confirmed the successful exfoliation of layered 2D materials and formation of their hybrid heterostructure. The co-existence of 2D MoS2 and WS2 in the vdW hybrid is established by optical absorption and Raman shift measurements along with their chemical stiochiometry determined by X-ray photoelectron spectroscopy. The spectral response of the vdWH/Si (2D/3D) heterojunction photodetector fabricated using the as-synthesized material is found to show superior broadband photoresponse compared to that shown by the individual 2D MoS$_2$ and WS$_2$ based devices. The peak responsivity is found to be ~2.15 A/W at a wavelength of ~560 nm for an applied bias of -5 V. The ease of fabrication and superior performance of the chemically synthesized vdWH-based devices have revealed their potential use for large area optoelectronic applications on Si compatible CMOS platforms. △ Less

Submitted 27 July, 2021; originally announced August 2021.

Comments: Total 25 pages and 12 figures including supporting data

Improving the applicability of the Pauli kinetic energy density based semilocal functional for solids

Authors: Subrata Jana, Sushant Kumar Behera, Szymon Smiga, Lucian A. Constantin, Prasanjit Samal

Abstract: The Pauli kinetic energy enhancement factor $αあるふぁ=(τたう-τたう^W)/τたう^{unif}$ is an important density ingredient, used to construct many meta-generalized gradient approximations (meta-GGA) exchange-correlation (XC) energy functionals, including the very successful strongly constrained and appropriately normed (SCAN) semilocal functional. Another meta-GGA functional, known as MGGAC [Phys. Rev. B 100, 155140 (20… ▽ More The Pauli kinetic energy enhancement factor $αあるふぁ=(τたう-τたう^W)/τたう^{unif}$ is an important density ingredient, used to construct many meta-generalized gradient approximations (meta-GGA) exchange-correlation (XC) energy functionals, including the very successful strongly constrained and appropriately normed (SCAN) semilocal functional. Another meta-GGA functional, known as MGGAC [Phys. Rev. B 100, 155140 (2019)], is also proposed in recent time depending only on the $αあるふぁ$ ingredient and based on the generalization of the Becke-Roussel approach with the cuspless hydrogen exchange hole density. The MGGAC functional is proved to be a very useful and competitive meta-GGA semilocal functional for electronic structure properties of solids and molecules. Based on the successful implication of the ingredient $αあるふぁ$, which is also useful to construct the one-electron self-interaction free correlation energy functional, here we propose revised correlation energy for MGGAC exchange functional which is more accurate and robust, especially for the high and low-density limits of the uniform density scaling. The present XC functional, named as revised MGGAC (rMGGAC), shows an impressive improvement for the structural and energetic properties of solids compared to its previous version. Moreover, the assessment of the present constructed functional shows to be quite useful in solid-state physics in terms of addressing several current challenging solid-state problems. △ Less

Submitted 22 April, 2021; originally announced April 2021.

A way of resolving the order-of-limit problem of Tao-Mo semilocal functional

Authors: Abhilash Patra, Subrata Jana, Prasanjit Samal

Abstract: It is highlighted recently that the Tao-Mo (TM) [Phys. Rev. Lett. 117, 073001 (2016)] semilocal exchange-correlation energy functional suffers from the order-of-limit problem, which affects the functional performance for phase transition pressures [J. Chem. Phys. 152, 244112 (2020)]. The root of the order-of-limit problem of the TM functional inherent within the interpolation function, which switc… ▽ More It is highlighted recently that the Tao-Mo (TM) [Phys. Rev. Lett. 117, 073001 (2016)] semilocal exchange-correlation energy functional suffers from the order-of-limit problem, which affects the functional performance for phase transition pressures [J. Chem. Phys. 152, 244112 (2020)]. The root of the order-of-limit problem of the TM functional inherent within the interpolation function, which switches between the compact density and the slowly varying density. In this paper, we propose a different switch function that avoids the order-of-limit problem and interpolates correctly between the compact density and the slowly varying fourth-order density correction. By circumventing the order-of-limit problem, the proposed form enhances the applicability of the original TM functional on the diverse nature of the solid-state properties. Our conclusion is ensured by examining the functional in predicting properties related to the general-purpose solids, quantum chemistry, and phase transition pressure. Besides, we reasonably discuss the connection between the order-of-limit problem, phase transition pressure, and band gap of solids. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Comments: 11 pages, 8 figures

Efficient yet Accurate Dispersion-Corrected Semilocal Exchange-Correlation Functionals For Non-Covalent Interactions

Authors: Abhilash Patra, Subrata Jana, Lucian A. Constantin, Prasanjit Samal

Abstract: Due to several attractive features, the meta-generalized-gradient approximations (meta-GGAs) are considered to be the most advanced and potentially accurate semilocal exchange-correlation functionals in the rungs of the Jacob's ladder of Density Functional Theory. So far, several meta-GGA are proposed by fitting to the test sets or/and satisfying as many as known exact constraints. Although the de… ▽ More Due to several attractive features, the meta-generalized-gradient approximations (meta-GGAs) are considered to be the most advanced and potentially accurate semilocal exchange-correlation functionals in the rungs of the Jacob's ladder of Density Functional Theory. So far, several meta-GGA are proposed by fitting to the test sets or/and satisfying as many as known exact constraints. Although the density overlap is treated by modern meta-GGA functionals efficiently, for non-covalent interactions, a long-range dispersion correction is essential. In this work, we assess the benchmark performance of different variants of the Tao-Mo semilocal functional (i.e. TM of Phys. Rev. Lett. 117, 073001 (2016) and revTM of J. Phys. Chem. A 123, 6356 (2019)) with Grimme's D3 correction for the several non-covalent interactions, including dispersion and hydrogen bonded systems. We consider the zero, Becke-Johnson(BJ), and optimized power (OP) damping functions within the D3 method, with both TM and revTM functionals. It is observed that the overall performance of the functionals gradually improved from zero to BJ and to OP damping. However, the constructed "OP" corrected (rev)TM+D3(OP) functionals perform considerably better compared to other well-known dispersion corrected functionals. Based on the accuracy of the proposed functionals, the future applicability of these methods is also discussed. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: 14 pages, 3 figures

A method to quantify molecular diffusion within thin solvated polymer films: A case study on films of natively unfolded nucleoporins

Authors: Rickard Frost, Delphine Débarre, Saikat Jana, Fouzia Bano, Jürgen Schünemann, Dirk Görlich, Ralf P. Richter

Abstract: We present a method to probe molecular and nanoparticle diffusion within thin, solvated polymer coatings. The device exploits the confinement with well-defined geometry that forms at the interface between a planar and a hemi-spherical surface (of which at least one is coated with polymers) in close contact, and uses this confinement to analyse diffusion processes without interference of exchange w… ▽ More We present a method to probe molecular and nanoparticle diffusion within thin, solvated polymer coatings. The device exploits the confinement with well-defined geometry that forms at the interface between a planar and a hemi-spherical surface (of which at least one is coated with polymers) in close contact, and uses this confinement to analyse diffusion processes without interference of exchange with and diffusion in the bulk solution. With this method, which we call plane-sphere confinement microscopy (PSCM), information regarding the partitioning of molecules between the polymer coating and the bulk liquid is also obtained. Thanks to the shape of the confined geometry, diffusion and partitioning can be mapped as a function of compression and concentration of the coating in a single experiment. The method is versatile and can be integrated with conventional optical microscopes, and thus should find widespread use in the many application areas exploiting functional polymer coatings. We demonstrate the use of PSCM using brushes of natively unfolded nucleoporin domains rich in phenylalanine-glycine repeats (FG domains). A meshwork of FG domains is known to be responsible for the selective transport of nuclear transport receptors (NTR) and their macromolecular cargos across the nuclear envelope that separates the cytosol and the nucleus of living cells. We find that the selectivity of NTR uptake by FG domain films depends sensitively on FG domain concentration, and that the interaction of NTRs with FG domains obstructs NTR movement only moderately. These observations contribute important information to better understand the mechanisms of selective NTR transport. △ Less

Submitted 4 June, 2020; v1 submitted 6 April, 2020; originally announced April 2020.

Comments: 27 pages and 6 figures of main text, 12 pages and 8 figures of supporting information

Accurate water properties from an efficient ab-initio method

Authors: Subrata Jana, Lucian A. Constantin, Prasanjit Samal

Abstract: Accurate prediction of the water properties from a low-cost ab-initio method still a foremost problem for chemists and physicist. Though density functional approaches starting from semilocal to hybrid functionals are tested, those are not efficiently performed for all the properties together, especially, considering energies, conformal ranking, structural and dynamics of water. Also, the inclusion… ▽ More Accurate prediction of the water properties from a low-cost ab-initio method still a foremost problem for chemists and physicist. Though density functional approaches starting from semilocal to hybrid functionals are tested, those are not efficiently performed for all the properties together, especially, considering energies, conformal ranking, structural and dynamics of water. Also, the inclusion of the long-range van der Waals (vdW) interaction does not improve the ordering stability of isomer. However, relying on the simple revision of the Tao-Mo (revTM) semilocal meta-generalized gradient approximations, we demonstrate that all properties of the water can be accurately predicted. A consistent improvement over several popular ab-initio methods is achieved, indicating the accuracy of this method for describing hydrogen bonding of water. △ Less

Submitted 29 September, 2019; originally announced September 2019.

Analysis of the linear relationship between asymmetry and magnetic moment at the M-edge of 3d transition metals

Authors: Somnath Jana, R. S. Malik, Yaroslav O. Kvashnin, Inka L. M. Locht, R. Knut, R. Stefanuik, Igor Di Marco, A. N. Yaresko, Martina Ahlberg, Raghuveer Chimata, Marco Battiato, Johan Söderström, Olle Eriksson, Olof Karis

Abstract: The magneto-optical response of Fe and Ni during ultrafast demagnetization is studied experimentally and theoretically. We have performed pump-probe experiments in the transverse magneto-optical Kerr effect (T-MOKE) geometry using photon energies that cover the M-absorption edges of Fe and Ni between 40 to 72 eV. The asymmetry was detected by measuring the reflection of light for two different ori… ▽ More The magneto-optical response of Fe and Ni during ultrafast demagnetization is studied experimentally and theoretically. We have performed pump-probe experiments in the transverse magneto-optical Kerr effect (T-MOKE) geometry using photon energies that cover the M-absorption edges of Fe and Ni between 40 to 72 eV. The asymmetry was detected by measuring the reflection of light for two different orientations of the sample magnetization. Density functional theory (DFT) wasused to calculate the magneto-optical response of different magnetic configurations, representing different types of excitations: long-wavelength magnons, short wavelength magnons, and Stoner excitations. In the case of Fe, we find that the calculated asymmetry is strongly dependent on the specific type of magnetic excitation. Our modelling also reveals that during remagnetization Fe is, to a reasonable approximation, described by magnons, even though small non-linear contributions could indicate some degree of Stoner excitations as well. In contrast, we find that the calculated asymmetry in Ni is rather insensitive to the type of magnetic excitations. However, there is a weak non-linearity in the relation between asymmetry and the off-diagonal component of the dielectric tensor, which does not originate from the modifications of the electronic structure. Our experimental and theoretical results thus emphasize the need of considering a coupling between asymmetry and magnetization that may be more complex that a simple linear relationship. This insight is crucial for the microscopic interpretation of ultrafast magnetization experiments. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Research 2, 013180 (2020)

An image-driven machine learning approach to kinetic modeling of a discontinuous precipitation reaction

Authors: Elizabeth Kautz, Wufei Ma, Saumyadeep Jana, Arun Devaraj, Vineet Joshi, Bülent Yener, Daniel Lewis

Abstract: Micrograph quantification is an essential component of several materials science studies. Machine learning methods, in particular convolutional neural networks, have previously demonstrated performance in image recognition tasks across several disciplines (e.g. materials science, medical imaging, facial recognition). Here, we apply these well-established methods to develop an approach to microstru… ▽ More Micrograph quantification is an essential component of several materials science studies. Machine learning methods, in particular convolutional neural networks, have previously demonstrated performance in image recognition tasks across several disciplines (e.g. materials science, medical imaging, facial recognition). Here, we apply these well-established methods to develop an approach to microstructure quantification for kinetic modeling of a discontinuous precipitation reaction in a case study on the uranium-molybdenum system. Prediction of material processing history based on image data (classification), calculation of area fraction of phases present in the micrographs (segmentation), and kinetic modeling from segmentation results were performed. Results indicate that convolutional neural networks represent microstructure image data well, and segmentation using the k-means clustering algorithm yields results that agree well with manually annotated images. Classification accuracies of original and segmented images are both 94\% for a 5-class classification problem. Kinetic modeling results agree well with previously reported data using manual thresholding. The image quantification and kinetic modeling approach developed and presented here aims to reduce researcher bias introduced into the characterization process, and allows for leveraging information in limited image data sets. △ Less

Submitted 13 June, 2019; originally announced June 2019.

Comments: 30 pages, 8 figures

Dispersion-managed soliton fiber laser with random dispersion, multiphoton absorption and gain dispersion

Authors: Gurkirpal Singh Parmar, Rajib Pradhan, B. A. Malomed, Soumendu Jana

Abstract: We address the generation and interaction of dispersion-managed dissipative solitons (DMDS) in a model of fiber lasers with the cubic-quintic nonlinearity, multiphoton absorption and gain dispersion. Both anomalous and normal segments of the dispersion map include random dispersion fluctuations. Effects of the gain dispersion, higher-order nonlinearity and randomness on the generation of DMDS are… ▽ More We address the generation and interaction of dispersion-managed dissipative solitons (DMDS) in a model of fiber lasers with the cubic-quintic nonlinearity, multiphoton absorption and gain dispersion. Both anomalous and normal segments of the dispersion map include random dispersion fluctuations. Effects of the gain dispersion, higher-order nonlinearity and randomness on the generation of DMDS are demonstrated. The solitons exhibit breather-like evolution, and are found to be robust, up to a certain critical level of the random-dispersion component, which is sufficiently high. The roles of multiphoton absorption, gain dispersion and nonlinearity on the DMDS are also identified in the absence of randomness. Pair wise interactions of solitons lead, most typically, to their merger, with breaking of the left-right symmetry. The outcome of the collisions is more sensitive to the initial temporal separation between the solitons than to their phase difference. △ Less

Submitted 6 September, 2018; originally announced September 2018.

Comments: To be published in Journal of Optics

Robust Heartbeat Detection from Multimodal Data via CNN-based Generalizable Information Fusion

Authors: B S Chandra, C S Sastry, S Jana

Abstract: Objective: Heartbeat detection remains central to cardiac disease diagnosis and management, and is traditionally performed based on electrocardiogram (ECG). To improve robustness and accuracy of detection, especially, in certain critical-care scenarios, the use of additional physiological signals such as arterial blood pressure (BP) has recently been suggested. There, estimation of heartbeat locat… ▽ More Objective: Heartbeat detection remains central to cardiac disease diagnosis and management, and is traditionally performed based on electrocardiogram (ECG). To improve robustness and accuracy of detection, especially, in certain critical-care scenarios, the use of additional physiological signals such as arterial blood pressure (BP) has recently been suggested. There, estimation of heartbeat location requires information fusion from multiple signals. However, reported efforts in this direction often obtain multimodal estimates somewhat indirectly, by voting among separately obtained signal-specific intermediate estimates. In contrast, we propose to directly fuse information from multiple signals without requiring intermediate estimates, and thence estimate heartbeat location in a robust manner. Method: We propose as a heartbeat detector, a convolutional neural network (CNN) that learns fused features from multiple physiological signals. This method eliminates the need for hand-picked signal-specific features and ad hoc fusion schemes. Further, being data-driven, the same algorithm learns suitable features from arbitrary set of signals. Results: Using ECG and BP signals of PhysioNet 2014 Challenge database, we obtained a score of 94%. Further, using two ECG channels of MIT-BIH arrhythmia database, we scored 99.92\%. Both those scores compare favourably with previously reported database-specific results. Also, our detector achieved high accuracy in a variety of clinical conditions. Conclusion: The proposed CNN-based information fusion (CIF) algorithm is generalizable, robust and efficient in detecting heartbeat location from multiple signals. Significance: In medical signal monitoring systems, our technique would accurately estimate heartbeat locations even when only a subset of channels are reliable. △ Less

Submitted 29 June, 2018; originally announced July 2018.

Density matrix expansion based semi-local exchange hole applied to range separated density functional theory

Authors: Bikash Patra, Subrata Jana, Prasanjit Samal

Abstract: Exchange hole is the principle constituent in density functional theory, which can be used to accurately design exchange energy functional and range separated hybrid functionals coupled with some appropriate correlation. Recently, density matrix expansion (DME) based semi-local exchange hole proposed by Tao-Mo gained attention due to its fulfillment of some exact constraints. We propose a new long… ▽ More Exchange hole is the principle constituent in density functional theory, which can be used to accurately design exchange energy functional and range separated hybrid functionals coupled with some appropriate correlation. Recently, density matrix expansion (DME) based semi-local exchange hole proposed by Tao-Mo gained attention due to its fulfillment of some exact constraints. We propose a new long-range corrected (LC) scheme that combines meta-generalized gradient approximation (meta-GGA) exchange functionals designed from DME exchange hole coupled with the ab-initio Hartree-Fock (HF) exchange integral by separating the Coulomb interaction operator using standard error function. Associate with Lee-Yang-Parr (LYP) correlation functional, assessment and benchmarking of our functional using well-known test set shows that it performs remarkably well for a broad range of molecular properties, such as thermochemistry, noncovalent interaction and barrier height of chemical reactions. △ Less

Submitted 13 September, 2017; originally announced September 2017.

Comments: 9 pages, 3 figures

Performance of Range Separated Hybrids: Study within BECKE88 family and Semilocal Exchange Hole based Range Separated Hybrid

Authors: Subrata Jana, Bikash Patra, Hemanadhan Myneni, Prasanjit Samal

Abstract: A long range corrected range separated hybrid functional is developed based on the density matrix expansion (DME) based semilocal exchange hole with Lee-Yang-Parr (LYP) correlation. An extensive study involving the proposed range separated hybrid for thermodynamic as well as properties related to the fractional occupation number is compared with different BECKE88 family semilocal, hybrid and range… ▽ More A long range corrected range separated hybrid functional is developed based on the density matrix expansion (DME) based semilocal exchange hole with Lee-Yang-Parr (LYP) correlation. An extensive study involving the proposed range separated hybrid for thermodynamic as well as properties related to the fractional occupation number is compared with different BECKE88 family semilocal, hybrid and range separated hybrids. It has been observed that using Kohn-Sham kinetic energy dependent exchange hole several properties related to the fractional occupation number can be improved without hindering the thermochemical accuracy. The newly constructed range separated hybrid accurately describe the hydrogen and non-hydrogen reaction barrier heights. The present range separated functional has been constructed using full semilocal meta-GGA type exchange hole having exact properties related to exchange hole therefore, it has a strong physical basis. △ Less

Submitted 1 September, 2017; originally announced September 2017.

Comments: 12 pages, 16 figures

Role of Kohn-Sham Kinetic Energy Density in Designing Asymptotically Correct Semilocal Exchange-Correlation Functionals in Two Dimensions

Authors: Subrata Jana, Prasanjit Samal

Abstract: The positive definite Kohn-Sham kinetic energy(KS-KE) density plays crucial role in designing semilocal meta generalized gradient approximations(meta-GGAs) for low dimensional quantum systems. It has been rigorously shown that near nucleus and at the asymptotic region, the KE-KS differ from its von Weizsäcker(VW) counterpart as contributions from different orbitals (i.e., s and p orbitals) play im… ▽ More The positive definite Kohn-Sham kinetic energy(KS-KE) density plays crucial role in designing semilocal meta generalized gradient approximations(meta-GGAs) for low dimensional quantum systems. It has been rigorously shown that near nucleus and at the asymptotic region, the KE-KS differ from its von Weizsäcker(VW) counterpart as contributions from different orbitals (i.e., s and p orbitals) play important role. This has been explored using two dimensional isotropic quantum harmonic oscillator as a test case. Several meta-GGA ingredients with different physical behaviors are also constructed and further used to design an accurate semilocal functionals at meta-GGA level. In the asymptotic region, a new exchange energy functional is constructed using the meta-GGA ingredients with formally exact properties of the enhancement factor. Also, it has been shown that exact asymptotic behavior of the exchange energy density and potential can be attained by choosing accurately the enhancement factor as a functional of meta-GGA ingredients. △ Less

Submitted 15 March, 2017; originally announced March 2017.

Comments: 9 pages, 5 figures

Dissipative Soliton Fiber Lasers with Higher-Order Nonlinearity, Multiphoton Absorption and Emission, and Random Dispersion

Authors: Gurkirpal Singh Parmar, Soumendu Jana, Boris A. Malomed

Abstract: We study the generation of dissipative solitons (DSs) in the model of the fiber-laser cavities under the combined action of cubic-quintic nonlinearity, multiphoton absorption and/or multiphoton emission (nonlinear gain) and gain dispersion. A random component of the group-velocity dispersion (GVD) is included too. The DS creation and propagation is studied by means of a variational approximation a… ▽ More We study the generation of dissipative solitons (DSs) in the model of the fiber-laser cavities under the combined action of cubic-quintic nonlinearity, multiphoton absorption and/or multiphoton emission (nonlinear gain) and gain dispersion. A random component of the group-velocity dispersion (GVD) is included too. The DS creation and propagation is studied by means of a variational approximation and direct simulations, which are found to be in reasonable agreement. With a proper choice of the gain, robust DS operation regimes are predicted for different combinations of multiphoton absorption and emission, in spite of the presence of the perturbation in the form of the random GVD. Importantly, the zero background around the solitons remains stable in the presence of the (necessary) linear gain. The solitons are stable too against a certain (realistic) level of noise. Another essential finding is that the quintic gain in the form of three-photon emission (3PE) offers an alternative mechanism for supporting stable solitons, provided that it is not too strong. The DSs coexist in low- and high amplitude forms, for a given value of their width. The low-amplitude DS is stable, while its high-amplitude counterpart is subject to the blowup instability, in the presence of the 3PE. Interactions between DSs show various scenarios of the creation of breather states through merger of the two solitons. △ Less

Submitted 7 March, 2017; originally announced March 2017.

Comments: JOSA B (in press); 10 pages; 15 Figures

Excited-State Density-Functional Theory Revisited: on the Uniqueness, Existence, and Construction of the Density-to-Potential Mapping

Authors: Prasanjit Samal, Subrata Jana, Sourabh S. Chauhan

Abstract: The generalized constrained search formalism is used to address the issues concerning density-to-potential mapping for excited states in time-independent density-functional theory. The multiplicity of potentials for any given density and the uniqueness in density-to-potential mapping are explained within the framework of unified constrained search formalism for excited-states due to Görling, Levy-… ▽ More The generalized constrained search formalism is used to address the issues concerning density-to-potential mapping for excited states in time-independent density-functional theory. The multiplicity of potentials for any given density and the uniqueness in density-to-potential mapping are explained within the framework of unified constrained search formalism for excited-states due to Görling, Levy-Nagy, Samal-Harbola and Ayers-Levy. The extensions of Samal-Harbola criteria and it's link to the generalized constrained search formalism are revealed in the context of existence and unique construction of the density-to-potential mapping. The close connections between the proposed criteria and the generalized adiabatic connection are further elaborated so as to keep the desired mapping intact at the strictly correlated regime. Exemplification of the unified constrained search formalism is done through model systems in order to demonstrate that the seemingly contradictory results reported so far are neither the true confirmation of lack of Hohenberg-Kohn theorem nor valid representation of violation of Gunnarsson-Lundqvist theorem for excited states. Hence the misleading interpretation of subtle differences between the ground and excited state density functional formalism are exemplified. △ Less

Submitted 7 June, 2015; v1 submitted 8 July, 2014; originally announced July 2014.

Comments: 19 pages, 22 figures

Perturbative stability of catenoidal soap films

Authors: Soumya Jana, Sayan Kar

Abstract: The perturbative stability of catenoidal soap films formed between parallel, equal radii, coaxial rings is studied using analytical and semi-analytical methods. Using a theorem on the nature of eigenvalues for a class of Sturm--Liouville operators, we show that for the given boundary conditions, azimuthally asymmetric perturbations are stable, while symmetric perturbations lead to an instability--… ▽ More The perturbative stability of catenoidal soap films formed between parallel, equal radii, coaxial rings is studied using analytical and semi-analytical methods. Using a theorem on the nature of eigenvalues for a class of Sturm--Liouville operators, we show that for the given boundary conditions, azimuthally asymmetric perturbations are stable, while symmetric perturbations lead to an instability--a result demonstrated in Ben Amar et. al [7] using numerics and experiment. Further, we show how to obtain the lowest real eigenvalue of perturbations, using the semi-analytical Asymptotic Iteration Method (AIM). Conclusions using AIM support the analytically obtained result as well as the results in [7]. Finally, we compute the eigenfunctions and show, pictorially, how the perturbed soap film evolves in time. △ Less

Submitted 27 December, 2012; originally announced December 2012.

Comments: 19 pages, 7 figures

Journal ref: Eur. Phys. J. Plus (2013) 128 : 108

Straight-line and turning locomotion of Paramecia

Authors: Saikat Jana, Matthew Giarra, Pavlos Vlachos, Sunghwan Jung

Abstract: In this fluid dynamics video we investigate the flow field around straight-line swimming and right and left turning Paramecia using micro- particle image velocimetry (μみゅーPIV). A Paramecium controls its ciliary beating to produce different fluid velocities on either side of its body. This phenomenon is visualized by applying μみゅーPIV to images in which Paramecia swim in a dilute suspension of 1 μみゅーm polyst… ▽ More In this fluid dynamics video we investigate the flow field around straight-line swimming and right and left turning Paramecia using micro- particle image velocimetry (μみゅーPIV). A Paramecium controls its ciliary beating to produce different fluid velocities on either side of its body. This phenomenon is visualized by applying μみゅーPIV to images in which Paramecia swim in a dilute suspension of 1 μみゅーm polystyrene spheres. Paramecia that swim straight exhibit similar magnitudes of velocity on either side of their bodies. In contrast, right-turning Paramecia exhibit greater magnitudes of velocity on their right sides, while left-turning organisms show the opposite. △ Less

Submitted 12 October, 2012; originally announced October 2012.

Comments: 1 page; 2 videos

Aggregation Patterns of Salt Crystalizing in Drying Colloidal Solvents

Authors: Moutushi Dutta Choudhury, Sayanee Jana, Sruti Dutta, Sujata Tarafdar

Abstract: We report a study of the structure of droplets of colloidal gels containing dissolved sodium chloride. The components segregate and form intricate patterns. The salt crystalizes in fractal and multi-fractal dendritic forms which are determined by the material which forms the colloidal gel. Here potato starch, gelatine and carboxymethyl cellulose have been used. The substrate also plays a role in s… ▽ More We report a study of the structure of droplets of colloidal gels containing dissolved sodium chloride. The components segregate and form intricate patterns. The salt crystalizes in fractal and multi-fractal dendritic forms which are determined by the material which forms the colloidal gel. Here potato starch, gelatine and carboxymethyl cellulose have been used. The substrate also plays a role in some cases. Photographs and micrographs at different level of magnification are shown. △ Less

Submitted 2 August, 2012; originally announced August 2012.

Comments: 9 figures

Paramecium swimming in capillary tube

Authors: Saikat Jana, Soong Ho Um, Sunghwan Jung

Abstract: Swimming organisms in their natural habitat navigate through a wide array of geometries and chemical environments. Interaction with the boundaries is ubiquitous and can significantly modify the swimming characteristics of the organism as observed under ideal conditions. We study the dynamics of ciliary locomotion in Paramecium multimicronucleatum and observe the effect of the solid boundaries on t… ▽ More Swimming organisms in their natural habitat navigate through a wide array of geometries and chemical environments. Interaction with the boundaries is ubiquitous and can significantly modify the swimming characteristics of the organism as observed under ideal conditions. We study the dynamics of ciliary locomotion in Paramecium multimicronucleatum and observe the effect of the solid boundaries on the velocities in the near field of the organism. Experimental observations show that Paramecium executes helical trajectories that slowly transition to straight line motion as the diameter of the capillary tubes decrease. Theoretically this system is modeled as an undulating cylinder with pressure gradient and compared with experiments; showing that such considerations are necessary for modeling finite sized organisms in the restrictive geometries. △ Less

Submitted 21 December, 2010; originally announced December 2010.