-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Parallel fast random bit generation based on spectrotemporally uncorrelated Brillouin random fiber lasing oscillation
Authors:
Yuxi Pang,
Shaonian Ma,
Qiang Ji,
Xian Zhao,
Zengguang Qin,
Zhaojun Liu,
Ping Lu,
Xiaoyi Bao,
Yanping Xu
Abstract:
Correlations existing between spectral components in multi-wavelength lasers have been the key challenge that hinders these laser sources from being developed to chaotic comb entropy sources for parallel random bit generation. Herein, spectrotemporally uncorrelated multi-order Stokes/anti-Stokes emissions are achieved by cooperatively exploiting nonlinear optical processes including cascaded stimu…
▽ More
Correlations existing between spectral components in multi-wavelength lasers have been the key challenge that hinders these laser sources from being developed to chaotic comb entropy sources for parallel random bit generation. Herein, spectrotemporally uncorrelated multi-order Stokes/anti-Stokes emissions are achieved by cooperatively exploiting nonlinear optical processes including cascaded stimulated Brillouin scattering and quasi-phase-matched four-wave mixing in a Brillouin random fiber laser. Chaotic instabilities induced by random mode resonance are enhanced and disorderly redistributed among different lasing lines through complex nonlinear optical interactions, which comprehensively releases the inherent correlation among multiple Stokes/anti-Stokes emission lines, realizing a chaotic frequency comb with multiple spectrotemporally uncorrelated channels. Parallel fast random bit generation is fulfilled with 31 channels, single-channel bit rate of 35-Gbps and total bit rate of 1.085-Tbps. National Institute of Standards and Technology statistic tests verify the randomness of generated bit streams. This work, in a simple and efficient way, breaks the correlation barrier for utilizing multi-wavelength laser to achieve high-quality spectrotemporally uncorrelated chaotic laser source, opening new avenues for achieving greatly accelerated random bit generation through parallelization and potentially revolutionizing the current architecture of secure communication and high-performance computation.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Ultrafast Kapitza-Dirac effect
Authors:
Kang Lin,
Sebastian Eckart,
Hao Liang,
Alexander Hartung,
Sina Jacob,
Qinying Ji,
Lothar Ph. H. Schmidt,
Markus S. Schöffler,
Till Jahnke,
Maksim Kunitski,
Reinhard Dörner
Abstract:
Similar to the optical diffraction of light passing through a material grating, the Kapitza-Dirac effect occurs when an electron is diffracted by a standing light wave. In its original description the effect is time-independent. In the present work, we extend the Kapitza-Dirac concept to the time domain. By tracking the spatiotemporal evolution of a pulsed electron wave packet diffracted by a femt…
▽ More
Similar to the optical diffraction of light passing through a material grating, the Kapitza-Dirac effect occurs when an electron is diffracted by a standing light wave. In its original description the effect is time-independent. In the present work, we extend the Kapitza-Dirac concept to the time domain. By tracking the spatiotemporal evolution of a pulsed electron wave packet diffracted by a femtosecond (10 15 second) standing wave pulse in a pump-probe scheme, we observe so far unseen time-dependent diffraction patterns. The fringe spacing in the observed pattern differs from that generated by the conventional Kapitza-Dirac effect, moreover it decreases as the pump-probe delay time increases. By exploiting this time-resolved diffraction scheme, we gather access to the time evolution of the previously inaccessible phase properties of a free electron.
△ Less
Submitted 30 March, 2024;
originally announced April 2024.
-
QubiCSV: An Open-Source Data Storage and Visualization Platform for Collaborative Qubit Control
Authors:
Devanshu Brahmbhatt,
Yilun Xu,
Neel Vora,
Larry Chen,
Neelay Fruitwala,
Gang Huang,
Qing Ji,
Phuc Nguyen
Abstract:
Developing collaborative research platforms for quantum bit control is crucial for driving innovation in the field, as they enable the exchange of ideas, data, and implementation to achieve more impactful outcomes. Furthermore, considering the high costs associated with quantum experimental setups, collaborative environments are vital for maximizing resource utilization efficiently. However, the l…
▽ More
Developing collaborative research platforms for quantum bit control is crucial for driving innovation in the field, as they enable the exchange of ideas, data, and implementation to achieve more impactful outcomes. Furthermore, considering the high costs associated with quantum experimental setups, collaborative environments are vital for maximizing resource utilization efficiently. However, the lack of dedicated data management platforms presents a significant obstacle to progress, highlighting the necessity for essential assistive tools tailored for this purpose. Current qubit control systems are unable to handle complicated management of extensive calibration data and do not support effectively visualizing intricate quantum experiment outcomes. In this paper, we introduce QubiCSV (Qubit Control Storage and Visualization), a platform specifically designed to meet the demands of quantum computing research, focusing on the storage and analysis of calibration and characterization data in qubit control systems. As an open-source tool, QubiCSV facilitates efficient data management of quantum computing, providing data versioning capabilities for data storage and allowing researchers and programmers to interact with qubits in real time. The insightful visualization are developed to interpret complex quantum experiments and optimize qubit performance. QubiCSV not only streamlines the handling of qubit control system data but also improves the user experience with intuitive visualization features, making it a valuable asset for researchers in the quantum computing domain.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Dispersive-wave-agile optical frequency division
Authors:
Qing-Xin Ji,
Wei Zhang,
Peng Liu,
Warren Jin,
Joel Guo,
Jonathan Peters,
Lue Wu,
Avi Feshali,
Mario Paniccia,
Vladimir Ilchenko,
John Bowers,
Andrey Matsko,
Kerry Vahala
Abstract:
The remarkable frequency stability of resonant systems in the optical domain (optical cavities and atomic transitions) can be harnessed at frequency scales accessible by electronics using optical frequency division. This capability is revolutionizing technologies spanning time keeping to high-performance electrical signal sources. A version of the technique called 2-point optical frequency divisio…
▽ More
The remarkable frequency stability of resonant systems in the optical domain (optical cavities and atomic transitions) can be harnessed at frequency scales accessible by electronics using optical frequency division. This capability is revolutionizing technologies spanning time keeping to high-performance electrical signal sources. A version of the technique called 2-point optical frequency division (2P-OFD) is proving advantageous for application to high-performance signal sources. In 2P-OFD, an optical cavity anchors two spectral endpoints defined by lines of a frequency comb. The comb need not be self-referenced, which greatly simplifies the system architecture and reduces power requirements. Here, a 2P-OFD microwave signal source is demonstrated with record-low phase noise using a microcomb. Key to this advance is a spectral endpoint defined by a frequency agile single-mode dispersive wave that is emitted by the microcomb soliton. Moreover, the system frequency reference is a compact all-solid-state optical cavity with a record Q-factor. The results advance integrable microcomb-based signal sources into the performance realm of much larger microwave sources.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Photonic chip-based low noise microwave oscillator
Authors:
Igor Kudelin,
William Groman,
Qing-Xin Ji,
Joel Guo,
Megan L. Kelleher,
Dahyeon Lee,
Takuma Nakamura,
Charles A. McLemore,
Pedram Shirmohammadi,
Samin Hanifi,
Haotian Cheng,
Naijun Jin,
Sam Halliday,
Zhaowei Dai,
Lue Wu,
Warren Jin,
Yifan Liu,
Wei Zhang,
Chao Xiang,
Vladimir Iltchenko,
Owen Miller,
Andrey Matsko,
Steven Bowers,
Peter T. Rakich,
Joe C. Campbell
, et al. (4 additional authors not shown)
Abstract:
Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are diffic…
▽ More
Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are difficult to further reduce in size and power consumption. Our work addresses this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division. Narrow linewidth self-injection locked integrated lasers are stabilized to a miniature Fabry-Pérot cavity, and the frequency gap between the lasers is divided with an efficient dark-soliton frequency comb. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc/Hz at 100 Hz offset frequency that decreases to -135 dBc/Hz at 10 kHz offset--values which are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
High-coherence hybrid-integrated 780 nm source by self-injection-locked second-harmonic generation in a high-Q silicon-nitride resonator
Authors:
Bohan Li,
Zhiquan Yuan,
Warren Jin,
Lue Wu,
Joel Guo,
Qing-Xin Ji,
Avi Feshali,
Mario Paniccia,
John E. Bowers,
Kerry J. Vahala
Abstract:
By self-injection-locking a 1560 nm distributed feedback semiconductor laser to a high-$Q$ silicon nitride resonator, a high-coherence 780 nm second harmonic signal is generated via the photogalvanic-induced second-order nonlinearity. A record-low frequency noise floor of 4 Hz$^2$/Hz is achieved for the 780 nm emission. The approach can be generalized for signal generation over a wide range of vis…
▽ More
By self-injection-locking a 1560 nm distributed feedback semiconductor laser to a high-$Q$ silicon nitride resonator, a high-coherence 780 nm second harmonic signal is generated via the photogalvanic-induced second-order nonlinearity. A record-low frequency noise floor of 4 Hz$^2$/Hz is achieved for the 780 nm emission. The approach can be generalized for signal generation over a wide range of visible and near-visible bands.
△ Less
Submitted 18 June, 2023;
originally announced June 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Soliton pulse pairs at multiple colors in normal dispersion microresonators
Authors:
Zhiquan Yuan,
Maodong Gao,
Yan Yu,
Heming Wang,
Warren Jin,
Qing-Xin Ji,
Avi Feshali,
Mario Paniccia,
John Bowers,
Kerry Vahala
Abstract:
Soliton microcombs are helping to advance the miniaturization of a range of comb systems. These combs mode lock through the formation of short temporal pulses in anomalous dispersion resonators. Here, a new microcomb is demonstrated that mode locks through the formation of pulse pairs in normal-dispersion coupled-ring resonators. Unlike conventional microcombs, pulses in this system cannot exist a…
▽ More
Soliton microcombs are helping to advance the miniaturization of a range of comb systems. These combs mode lock through the formation of short temporal pulses in anomalous dispersion resonators. Here, a new microcomb is demonstrated that mode locks through the formation of pulse pairs in normal-dispersion coupled-ring resonators. Unlike conventional microcombs, pulses in this system cannot exist alone, and instead must phase lock in pairs to form a bright soliton comb. Also, the pulses can form at recurring spectral windows and the pulses in each pair feature different optical spectra. This pairwise mode-locking modality extends to higher dimensions and we demonstrate 3-ring systems in which 3 pulses mode lock through alternating pairwise pulse coupling. The results are demonstrated using the new CMOS-foundry platform that has not previously produced bright solitons on account of its inherent normal dispersion. The ability to generate multi-color pulse pairs over multiple rings is an important new feature for microcombs. It can extend the concept of all-optical soliton buffers and memories to multiple storage rings that multiplex pulses with respect to soliton color and that are spatially addressable. The results also suggest a new platform for the study of quantum combs and topological photonics.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Engineered zero-dispersion microcombs using CMOS-ready photonics
Authors:
Qing-Xin Ji,
Warren Jin,
Lue Wu,
Yan Yu,
Zhiquan Yuan,
Wei Zhang,
Maodong Gao,
Bohan Li,
Heming Wang,
Chao Xiang,
Joel Guo,
Avi Feshali,
Mario Paniccia,
Vladimir S. Ilchenko,
Andrey B. Matsko,
John Bowers,
Kerry Vahala
Abstract:
Normal group velocity dispersion (GVD) microcombs offer high comb line power and high pumping efficiency compared to bright pulse microcombs. The recent demonstration of normal GVD microcombs using CMOS-foundry-produced microresonators is an important step towards scalable production. However, the chromatic dispersion of CMOS devices is large and impairs generation of broadband microcombs. Here, w…
▽ More
Normal group velocity dispersion (GVD) microcombs offer high comb line power and high pumping efficiency compared to bright pulse microcombs. The recent demonstration of normal GVD microcombs using CMOS-foundry-produced microresonators is an important step towards scalable production. However, the chromatic dispersion of CMOS devices is large and impairs generation of broadband microcombs. Here, we report the development of a microresonator in which GVD is reduced due to a couple-ring resonator configuration. Operating in the turnkey self-injection-locking mode, the resonator is hybridly integrated with a semiconductor laser pump to produce high-power-efficiency combs spanning a bandwidth of 9.9 nm (1.22 THz) centered at 1560 nm, corresponding to 62 comb lines. Fast, linear optical sampling of the comb waveform is used to observe the rich set of near-zero GVD comb behaviors, including soliton molecules, switching waves (platicons) and their hybrids. Tuning of the 20 GHz repetition rate by electrical actuation enables servo locking to a microwave reference, which simultaneously stabilizes the comb repetition rate, offset frequency and temporal waveform. This hybridly integrated system could be used in coherent communications or for ultra-stable microwave signal generation by two-point optical frequency division.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Three-dimensional integration enables ultra-low-noise, isolator-free Si photonics
Authors:
Chao Xiang,
Warren Jin,
Osama Terra,
Bozhang Dong,
Heming Wang,
Lue Wu,
Joel Guo,
Theodore J. Morin,
Eamonn Hughes,
Jonathan Peters,
Qing-Xin Ji,
Avi Feshali,
Mario Paniccia,
Kerry J. Vahala,
John E. Bowers
Abstract:
While photonic integrated circuits (PICs) are being widely used in applications such as telecommunications and datacenter interconnects, PICs capable of replacing bulk optics and fibers in high-precision, highly-coherent applications will require ultra-low-noise laser sources to be integrated with other photonic components in a compact and robustly aligned format -- that is, on a single chip. Such…
▽ More
While photonic integrated circuits (PICs) are being widely used in applications such as telecommunications and datacenter interconnects, PICs capable of replacing bulk optics and fibers in high-precision, highly-coherent applications will require ultra-low-noise laser sources to be integrated with other photonic components in a compact and robustly aligned format -- that is, on a single chip. Such PICs could offer superior scalability for complex functionalities and volume production, as well as improved stability and reliability over time. However, there are two major issues preventing the realization of such envisioned PICs: the high phase noise of semiconductor lasers, and the difficulty of integrating optical isolators directly on chip. PICs are still considered as inferior solutions in optical systems such as microwave synthesizers, optical gyroscopes and atomic clocks, despite their advantages in size, weight, power consumption and cost (SWaPC). Here, we challenge this convention by introducing three-dimensional (3D) integration in silicon photonics that results in ultra-low-noise, isolator-free PICs. Through multiple monolithic and heterogeneous processing sequences, direct on-chip integration of III-V gain and ultra-low-loss (ULL) silicon nitride (SiN) waveguides with optical loss around 0.5 dB/m are demonstrated. Consequently, the demonstrated PIC enters a new regime, such that an integrated ultra-high-Q cavity reduces the laser noise close to that of fiber lasers. Moreover, the cavity acts as an effective block for any downstream on-chip or off-chip reflection-induced destabilization, thus eliminating the need for optical isolators. We further showcase isolator-free, widely-tunable, low-noise, heterodyne microwave generation using two ultra-low-noise lasers on the same silicon chip.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
Synergistic Photon Management and Strain-Induced Band Gap Engineering of Two-Dimensional MoS2 Using Semimetal Composite Nanostructures
Authors:
Xiaoxue Gao,
Sidan Fu,
Tao Fang,
Xiaobai Yu,
Haozhe Wang,
Qingqing Ji,
Jing Kong,
Xiaoxin Wang,
Jifeng Liu
Abstract:
2D MoS2 attracts increasing attention for its application in flexible electronics and photonic devices. For 2D material optoelectronic devices, light absorption of the molecularly thin 2D absorber would be one of the key limiting factors in device efficiency, and conventional photon management techniques are not necessarily compatible with them. In this paper, we show two semimetal composite nanos…
▽ More
2D MoS2 attracts increasing attention for its application in flexible electronics and photonic devices. For 2D material optoelectronic devices, light absorption of the molecularly thin 2D absorber would be one of the key limiting factors in device efficiency, and conventional photon management techniques are not necessarily compatible with them. In this paper, we show two semimetal composite nanostructures for synergistic photon management and strain-induced band gap engineering of 2D MoS2: (1) pseudo-periodic Sn nanodots, (2) conductive SnOx (x<1) core-shell nanoneedle structures. Without sophisticated nanolithography, both nanostructures are self-assembled from physical vapor deposition. 2D MoS2 achieves up to >15x enhancement in absorption at λ=650-950 nm under Sn nanodots, and 20-30x at λ=700-900 nm under SnOx (x<1) nanoneedles, both spanning from visible to near infrared regime. Enhanced absorption in MoS2 results from strong near field enhancement and reduced MoS2 band gap due to the tensile strain induced by the Sn nanostructures, as confirmed by Raman and photoluminescence spectroscopy. Especially, we demonstrate that up to 3.5% biaxial tensile strain is introduced to 2D MoS2 using conductive nanoneedle-structured SnOx (x<1), which reduces the band gap by ~0.35 eV to further enhance light absorption at longer wavelengths. To the best of our knowledge, this is the first demonstration of a synergistic triple-functional photon management, stressor, and conductive electrode layer on 2D MoS2. Such synergistic photon management and band gap engineering approach for extended spectral response can be further applied to other 2D materials for future 2D photonic devices.
△ Less
Submitted 3 January, 2023;
originally announced January 2023.
-
Carbon nanotube substrates enhance SARS-CoV-2 spike protein ion yields in matrix assisted laser desorption-ionization mass spectrometry
Authors:
T. Schenkel,
A. M. Snijders,
K. Nakamura,
P. A. Seidl,
B. Mak,
L. Obst-Huebl,
H. Knobel,
I. Pong,
A. Persaud,
J. van Tilborg,
T. Ostermayr,
S. Steinke,
E. A. Blakely,
Q. Ji,
A. Javey,
R. Kapadia,
C. G. R. Geddes,
E. Esarey
Abstract:
Nanostructured surfaces enhance ion yields in matrix assisted laser desorption-ionization mass spectrometry (MALDI-MS). The spike protein complex, S1, is one fingerprint signature of Sars-CoV-2 with a mass of 75 kDa. Here, we show that MALDI-MS yields of Sars-CoV-2 spike protein ions in the 100 kDa range are enhanced 50-fold when the matrix-analyte solution is placed on substrates that are coated…
▽ More
Nanostructured surfaces enhance ion yields in matrix assisted laser desorption-ionization mass spectrometry (MALDI-MS). The spike protein complex, S1, is one fingerprint signature of Sars-CoV-2 with a mass of 75 kDa. Here, we show that MALDI-MS yields of Sars-CoV-2 spike protein ions in the 100 kDa range are enhanced 50-fold when the matrix-analyte solution is placed on substrates that are coated with a dense forest of multi-walled carbon nanotubes, compared to yields from uncoated substrates. Nanostructured substrates can support the development of mass spectrometry techniques for sensitive pathogen detection and environmental monitoring.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Online Charge Measurement for Petawatt Laser-Driven Ion Acceleration
Authors:
Laura D. Geulig,
Lieselotte Obst-Huebl,
Kei Nakamura,
Jianhui Bin,
Qing Ji,
Sven Steinke,
Antoine Snijders,
Jian-Hua Mao,
Eleanor Blakely,
Anthony J. Gonsalves,
Stepan S. Bulanov,
Jeroen van Tilborg,
Carl B. Schroeder,
Cameron G. R. Geddes,
Eric Esarey,
Markus Roth,
Thomas Schenkel
Abstract:
Laser-driven ion beams have gained considerable attention for their potential use in multidisciplinary research and technology. Pre-clinical studies into their radiobiological effectiveness have established the prospect of using laser-driven ion beams for radiotherapy. In particular, research into the beneficial effects of ultra-high instantaneous dose rates is enabled by the high ion bunch charge…
▽ More
Laser-driven ion beams have gained considerable attention for their potential use in multidisciplinary research and technology. Pre-clinical studies into their radiobiological effectiveness have established the prospect of using laser-driven ion beams for radiotherapy. In particular, research into the beneficial effects of ultra-high instantaneous dose rates is enabled by the high ion bunch charge and uniquely short bunch lengths present for laser-driven ion beams. Such studies require reliable, online dosimetry methods to monitor the bunch charge for every laser shot to ensure that the prescribed dose is accurately applied to the biological sample. In this paper we present the first successful use of an Integrating Current Transformer (ICT) for laser-driven ion accelerators. This is a non-invasive diagnostic to measure the charge of the accelerated ion bunch. It enables online dose measurements in radiobiological experiments and facilitates ion beam tuning, in particular, optimization of the laser ion source and alignment of the proton transport beamline. We present the ICT implementation and the correlation with other diagnostics such as radiochromic films, a Thomson parabola spectrometer and a scintillator.
△ Less
Submitted 3 May, 2022;
originally announced May 2022.
-
Defect engineering of silicon with ion pulses from laser acceleration
Authors:
Walid Redjem,
Ariel J. Amsellem,
Frances I. Allen,
Gabriele Benndorf,
Jianhui Bin,
Stepan Bulanov,
Eric Esarey,
Leonard C. Feldman,
Javier Ferrer Fernandez,
Javier Garcia Lopez,
Laura Geulig,
Cameron R. Geddes,
Hussein Hijazi,
Qing Ji,
Vsevolod Ivanov,
Boubacar Kante,
Anthony Gonsalves,
Jan Meijer,
Kei Nakamura,
Arun Persaud,
Ian Pong,
Lieselotte Obst-Huebl,
Peter A. Seidl,
Jacopo Simoni,
Carl Schroeder
, et al. (5 additional authors not shown)
Abstract:
Defect engineering is foundational to classical electronic device development and for emerging quantum devices. Here, we report on defect engineering of silicon single crystals with ion pulses from a laser accelerator with ion flux levels up to 10^22 ions/cm^2/s. Low energy ions from plasma expansion of the laser-foil target are implanted near the surface and then diffuse into silicon samples that…
▽ More
Defect engineering is foundational to classical electronic device development and for emerging quantum devices. Here, we report on defect engineering of silicon single crystals with ion pulses from a laser accelerator with ion flux levels up to 10^22 ions/cm^2/s. Low energy ions from plasma expansion of the laser-foil target are implanted near the surface and then diffuse into silicon samples that were locally pre-heated by high energy ions. We observe low energy ion fluences of ~10^16 cm^-2, about four orders of magnitude higher than the fluence of high energy (MeV) ions. In the areas of highest energy deposition, silicon crystals exfoliate from single ion pulses. Color centers, predominantly W and G-centers, form directly in response to ion pulses without a subsequent annealing step. We find that the linewidth of G-centers increase in areas with high ion flux much more than the linewidth of W-centers, consistent with density functional theory calculations of their electronic structure. Laser ion acceleration generates aligned pulses of high and low energy ions that expand the parameter range for defect engineering and doping of semiconductors with tunable balances of ion flux, damage rates and local heating.
△ Less
Submitted 25 March, 2022;
originally announced March 2022.
-
Collective Effects and Intense Beam-Plasma Interactions in Ion-Beam-Driven High Energy Density Matter and Inertial Fusion Energy
Authors:
Igor D. Kaganovich,
Edward A. Startsev,
Hong Qin,
Erik Gilson,
Thomas Schenkel,
Jean-Luc Vay,
Ed P. Lee,
William Waldron,
Roger Bangerter,
Arun Persaud,
Peter Seidl,
Qing Ji,
Alex Friedman,
Dave P. Grote,
John Barnard
Abstract:
For the successful generation of ion-beam-driven high energy density matter and heavy ion fusion energy, intense ion beams must be transported and focused onto a target with small spot size. One of the successful approaches to achieve this goal is to accelerate and transport intense ion charge bunches in an accelerator and then focus the charge bunches ballistically in a section of the accelerator…
▽ More
For the successful generation of ion-beam-driven high energy density matter and heavy ion fusion energy, intense ion beams must be transported and focused onto a target with small spot size. One of the successful approaches to achieve this goal is to accelerate and transport intense ion charge bunches in an accelerator and then focus the charge bunches ballistically in a section of the accelerator that contains a neutralizing background plasma. This requires the ability to control space-charge effects during un-neutralized (non-neutral) beam transport in the accelerator and transport sections, and the ability to effectively neutralize the space charge and current by propagating the beam through background plasma. As the beam intensity and energy are increased in future heavy ion fusion (HIF) drivers and Fast Ignition (FI) approaches, it is expected that nonlinear processes and collective effects will become much more pronounced than in previous experiments. Making use of 3D electromagnetic particle-in-cell simulation (PIC) codes (BEST, WARP-X, and LTP-PIC, etc.), the theory and modelling studies will be validated by comparing with experimental data on the 100kV Princeton Advanced Test Stand, and future experiments at the FAIR facility. The theoretical predictions that are developed will be scaled to the beam and plasma parameters relevant to heavy ion fusion drivers and Fast Ignition scenarios. Therefore, the theoretical results will also contribute significantly toward the long-term goal of fusion energy production by ion-beam-driven inertial confinement fusion.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
Probing material absorption and optical nonlinearity of integrated photonic materials
Authors:
Maodong Gao,
Qi-Fan Yang,
Qing-Xin Ji,
Heming Wang,
Lue Wu,
Boqiang Shen,
Junqiu Liu,
Guanhao Huang,
Lin Chang,
Weiqiang Xie,
Su-Peng Yu,
Scott B. Papp,
John E. Bowers,
Tobias J. Kippenberg,
Kerry J. Vahala
Abstract:
Optical microresonators with high quality ($Q$) factors are essential to a wide range of integrated photonic devices. Steady efforts have been directed towards increasing microresonator $Q$ factors across a variety of platforms. With success in reducing microfabrication process-related optical loss as a limitation of $Q$, the ultimate attainable $Q$, as determined solely by the constituent microre…
▽ More
Optical microresonators with high quality ($Q$) factors are essential to a wide range of integrated photonic devices. Steady efforts have been directed towards increasing microresonator $Q$ factors across a variety of platforms. With success in reducing microfabrication process-related optical loss as a limitation of $Q$, the ultimate attainable $Q$, as determined solely by the constituent microresonator material absorption, has come into focus. Here, we report measurements of the material-limited $Q$ factors in several photonic material platforms. High-$Q$ microresonators are fabricated from thin films of SiO$_2$, Si$_3$N$_4$, Al$_{0.2}$Ga$_{0.8}$As and Ta$_2$O$_5$. By using cavity-enhanced photothermal spectroscopy, the material-limited $Q$ is determined. The method simultaneously measures the Kerr nonlinearity in each material and reveals how material nonlinearity and ultimate $Q$ vary in a complementary fashion across photonic materials. Besides guiding microresonator design and material development in four material platforms, the results help establish performance limits in future photonic integrated systems.
△ Less
Submitted 29 October, 2021;
originally announced November 2021.
-
Vibrational Kerr solitons in an optomechanical microresonator
Authors:
Jia-Chen Shi,
Qing-Xin Ji,
Qi-Tao Cao,
Yan Yu,
Wenjing Liu,
Qihuang Gong,
Yun-Feng Xiao
Abstract:
Soliton microcombs based on Kerr nonlinearity in microresonators have been a prominent miniaturized coherent light source. Here, for the first time, we demonstrate the existence of Kerr solitons in an optomechanical microresonator, for which a nonlinear model is built by incorporating a single mechanical mode and multiple optical modes. Interestingly, an exotic vibrational Kerr soliton state is fo…
▽ More
Soliton microcombs based on Kerr nonlinearity in microresonators have been a prominent miniaturized coherent light source. Here, for the first time, we demonstrate the existence of Kerr solitons in an optomechanical microresonator, for which a nonlinear model is built by incorporating a single mechanical mode and multiple optical modes. Interestingly, an exotic vibrational Kerr soliton state is found, which is modulated by a self-sustained mechanical oscillation. Besides, the soliton provides extra mechanical gain through the optical spring effect, and results in phonon lasing with a red-detuned pump. Various nonlinear dynamics is also observed, including limit cycle, higher periodicity, and transient chaos. This work provides a guidance for not only exploring many-body nonlinear interactions, but also promoting precision measurements by featuring superiority of both frequency combs and optomechanics.
△ Less
Submitted 29 September, 2021;
originally announced September 2021.
-
Experimental Evidence of Nonlinear Avalanche Dynamics of Energetic Particle Modes
Authors:
L. M. Yu,
F. Zonca,
Z. Y. Qiu,
L. Chen,
W. Chen,
X. T. Ding,
X. Q. Ji,
T. Wang,
T. B. Wang,
R. R. Ma,
B. S. Yuan,
P. W. Shi,
Y. G. Li,
L. Liu,
Z. B. Shi,
J. Y. Cao,
J. Q. Dong,
Yi Liu,
Q. W. Yang,
M. Xu
Abstract:
Recent observations in HL-2A tokamak give new experimental evidences of energetic particle mode (EPM) avalanche. In a strong EPM burst, the mode structure propagates radially outward within two hundred Alfvén time, while the frequency of the dominant mode changes self-consistently to maximize wave-particle power exchange and mode growth. This suggests that significant energetic particle transport…
▽ More
Recent observations in HL-2A tokamak give new experimental evidences of energetic particle mode (EPM) avalanche. In a strong EPM burst, the mode structure propagates radially outward within two hundred Alfvén time, while the frequency of the dominant mode changes self-consistently to maximize wave-particle power exchange and mode growth. This suggests that significant energetic particle transport occurs in this avalanche phase, in agreement with theoretical framework of EPM convective amplification. A simplified relay runner model yields satisfactory interpretations of the measurements. The results can help understanding the nonlinear dynamics of energetic particle driven modes in future burning plasmas, such as ITER.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Beam power scale-up in MEMS based multi-beam ion accelerators
Authors:
Q. Ji,
K. K. Afridi,
T. Bauer,
G. Giesbrecht,
Y. Hou,
A. Lal,
D. Ni,
A. Persaud,
Z. Qin,
P. Seidl,
S. Sinha,
T. Schenkel
Abstract:
We report on the development of multi-beam RF linear ion accelerators that are formed from stacks of low cost wafers and describe the status of beam power scale-up using an array of 120 beams. The total argon ion current extracted from the 120-beamlet extraction column was 0.5 mA. The measured energy gain in each RF gap reached as high as 7.25 keV. We present a path of using this technology to ach…
▽ More
We report on the development of multi-beam RF linear ion accelerators that are formed from stacks of low cost wafers and describe the status of beam power scale-up using an array of 120 beams. The total argon ion current extracted from the 120-beamlet extraction column was 0.5 mA. The measured energy gain in each RF gap reached as high as 7.25 keV. We present a path of using this technology to achieve ion currents >1 mA and ion energies >100 keV for applications in materials processing.
△ Less
Submitted 21 May, 2021;
originally announced May 2021.
-
Designing thermal energy harvesting devices with natural materials through optimized microstructures
Authors:
Qingxiang Ji,
Xueyan Chen,
Jun Liang,
Vincent Laude,
Sébastien Guenneau,
Guodong Fang,
Muamer Kadic
Abstract:
Metamaterial thermal energy devices obtained from transformation optics have recently attracted wide attention due to their vast potential in energy storage, thermal harvesting or heat manipulation. However, these devices usually require inhomogeneous and extreme material parameters which are difficult to realize in large-scale applications. Here, we demonstrate a general process to design thermal…
▽ More
Metamaterial thermal energy devices obtained from transformation optics have recently attracted wide attention due to their vast potential in energy storage, thermal harvesting or heat manipulation. However, these devices usually require inhomogeneous and extreme material parameters which are difficult to realize in large-scale applications. Here, we demonstrate a general process to design thermal harvesting devices with available natural materials through optimized composite microstructures. We apply two-scale homogenization theory to obtain effective properties of the microstructures. Optimal Latin hypercube technique, combined with a genetic algorithm, is then implemented on the microstructures to achieve optimized design parameters. The optimized microstructures can accurately approximate the behavior of transformed materials. We design such devices and numerically characterize good thermal-energy harvesting performances. To validate the wide-range application of our approach, we illustrate other types of microstructures that mimic well the constitutive parameters. The approach we propose can be used to design novel thermal harvesting devices available with existing technology, and can also act as a beneficial vehicle to explore other transformation optics enabled designs.
△ Less
Submitted 20 July, 2020;
originally announced August 2020.
-
Optimal isotropic, reusable truss lattice material with near-zero Poisson's ratio
Authors:
Xueyan Chen,
Johnny Moughames,
Qingxiang Ji,
Julio Andrés Iglesias Martínez,
Huifeng Tan,
Samia Adrar,
Nicolas Laforge,
Jean-Marc Cote,
Sébastien Euphrasie,
Gwenn Ulliac,
Muamer Kadic,
Vincent Laude
Abstract:
Cork is a natural amorphous material with near-zero Poisson's ratio that is ubiquitously used for sealing glass bottles. It is an anisotropic, transversally isotropic, composite that can hardly be scaled down. Here, we propose a new class of isotropic and reusable cork-like metamaterial that is designed from an hybrid truss-lattice material to show an isotropic Poisson's ratio close to zero. Optim…
▽ More
Cork is a natural amorphous material with near-zero Poisson's ratio that is ubiquitously used for sealing glass bottles. It is an anisotropic, transversally isotropic, composite that can hardly be scaled down. Here, we propose a new class of isotropic and reusable cork-like metamaterial that is designed from an hybrid truss-lattice material to show an isotropic Poisson's ratio close to zero. Optimization is conducted using a multi-objective genetic algorithm, assisted by an elliptical basis function neural network, and coupled with finite element simulations. The optimal micro-structured metamaterial, fabricated by two-photon lithography with a lattice constant of 300 \micro\meter, has an almost isotropic Poisson's ratio smaller than 0.08 in all directions. It can recover $96.6\%$ of its original shape after a compressional test exceeding $20\%$ strain.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Integrated turnkey soliton microcombs operated at CMOS frequencies
Authors:
Boqiang Shen,
Lin Chang,
Junqiu Liu,
Heming Wang,
Qi-Fan Yang,
Chao Xiang,
Rui Ning Wang,
Jijun He,
Tianyi Liu,
Weiqiang Xie,
Joel Guo,
Dave Kinghorn,
Lue Wu,
Qing-Xin Ji,
Tobias J. Kippenberg,
Kerry Vahala,
John E. Bowers
Abstract:
While soliton microcombs offer the potential for integration of powerful frequency metrology and precision spectroscopy systems, their operation requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components. Moreover, CMOS-rate microcombs, required in nearly all comb systems, have resisted integration because of their power requirements.…
▽ More
While soliton microcombs offer the potential for integration of powerful frequency metrology and precision spectroscopy systems, their operation requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components. Moreover, CMOS-rate microcombs, required in nearly all comb systems, have resisted integration because of their power requirements. Here, a regime for turnkey operation of soliton microcombs co-integrated with a pump laser is demonstrated and theoretically explained. Significantly, a new operating point is shown to appear from which solitons are generated through binary turn-on and turn-off of the pump laser, thereby eliminating all photonic/electronic control circuitry. These features are combined with high-Q $Si_3N_4$ resonators to fully integrate into a butterfly package microcombs with CMOS frequencies as low as 15 GHz, offering compelling advantages for high-volume production.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Investigation of light ion fusion reactions with plasma discharges
Authors:
T. Schenkel,
A. Persaud,
H. Wang,
P. A. Seidl,
R. MacFadyen,
C. Nelson,
W. L. Waldron,
J. -L. Vay,
G. Deblonde,
B. Wen,
Y. -M. Chiang,
B. P. MacLeod,
Q. Ji
Abstract:
The scaling of reaction yields in light ion fusion to low reaction energies is important for our understanding of stellar fuel chains and the development of future energy technologies. Experiments become progressively more challenging at lower reaction energies due to the exponential drop of fusion cross sections below the Coulomb barrier. We report on experiments where deuterium-deuterium (D-D) f…
▽ More
The scaling of reaction yields in light ion fusion to low reaction energies is important for our understanding of stellar fuel chains and the development of future energy technologies. Experiments become progressively more challenging at lower reaction energies due to the exponential drop of fusion cross sections below the Coulomb barrier. We report on experiments where deuterium-deuterium (D-D) fusion reactions are studied in a pulsed plasma in the glow discharge regime using a benchtop apparatus. We model plasma conditions using particle-in-cell codes. Advantages of this approach are relatively high peak ion currents and current densities (0.1 to several A/cm^2) that can be applied to metal wire cathodes for several days. We detect neutrons from D-D reactions with scintillator-based detectors. For palladium targets, we find neutron yields as a function of cathode voltage that are over 100 times higher than yields expected for bare nuclei fusion at ion energies below 2 keV (center of mass frame). A possible explanation is a correction to the ion energy due to an electron screening potential of 1000+/-250 eV, which increases the probability for tunneling through the repulsive Coulomb barrier. Our compact, robust setup enables parametric studies of this effect at relatively low reaction energies.
△ Less
Submitted 24 May, 2019; v1 submitted 8 May, 2019;
originally announced May 2019.
-
Ion Acceleration in Laser Generated Mega Tesla Magnetic Vortex
Authors:
Jaehong Park,
Stepan S. Bulanov,
Jianhui Bin,
Qing Ji,
Sven Steinke,
Jean-Luc Vay,
Cameron G. R. Geddes,
Carl B. Schroeder,
Wim P. Leemans,
Thomas Schenkel,
Eric Esarey
Abstract:
Magnetic Vortex Acceleration (MVA) from near critical density targets is one of the promising schemes of laser-driven ion acceleration. 3D particle-in-cell simulations are used to explore a more extensive laser-target parameter space than previously reported on in the literature as well as to study the laser pulse coupling to the target, the structure of the fields, and the properties of the accel…
▽ More
Magnetic Vortex Acceleration (MVA) from near critical density targets is one of the promising schemes of laser-driven ion acceleration. 3D particle-in-cell simulations are used to explore a more extensive laser-target parameter space than previously reported on in the literature as well as to study the laser pulse coupling to the target, the structure of the fields, and the properties of the accelerated ion beam in the MVA scheme. The efficiency of acceleration depends on the coupling of the laser energy to the self-generated channel in the target. The accelerated proton beams demonstrate high level of collimation with achromatic angular divergence, and carry a significant amount of charge. For PW-class lasers, this acceleration regime provides favorable scaling of maximum ion energy with laser power for optimized interaction parameters. The mega Tesla-level magnetic fields generated by the laser-driven co-axial plasma structure in the target are prerequisite for accelerating protons to the energy of several hundred MeV.
△ Less
Submitted 5 April, 2019;
originally announced April 2019.
-
Compact, directional neutron detectors capable of high-resolution nuclear recoil imaging
Authors:
I. Jaegle,
P. M. Lewis,
M. Garcia-Sciveres,
M. T. Hedges,
T. Hemperek,
J. Janssen,
Q. Ji,
D. -L. Pohl,
S. Ross,
J. Schueler,
I. Seong,
T. N. Thorpe,
S. E. Vahsen
Abstract:
We report on the design, production, and performance of compact 40-cm$^3$ Time Projection Chambers (TPCs) that detect fast neutrons by measuring the three-dimensional (3D) ionization distribution of nuclear recoils in $^4$He:CO$_2$ gas at atmospheric pressure. We use these detectors to characterize the fast-neutron flux inside the Belle II detector at the SuperKEKB electron-positron collider in Ts…
▽ More
We report on the design, production, and performance of compact 40-cm$^3$ Time Projection Chambers (TPCs) that detect fast neutrons by measuring the three-dimensional (3D) ionization distribution of nuclear recoils in $^4$He:CO$_2$ gas at atmospheric pressure. We use these detectors to characterize the fast-neutron flux inside the Belle II detector at the SuperKEKB electron-positron collider in Tsukuba, Japan, where the primary design constraint is a small form factor. We find that the TPCs meet or exceed all design specifications, and are capable of measuring the 3D surface shape and charge density profile of ionization clouds from nuclear recoils and charged tracks in exquisite detail. Scaled-up detectors based on the detection principle demonstrated here may be suitable for directional dark matter searches, measurements of coherent neutrino-nucleus scattering, and other experiments requiring precise detection of neutrons or nuclear recoils.
△ Less
Submitted 6 May, 2019; v1 submitted 20 January, 2019;
originally announced January 2019.
-
Multi-beam RF accelerators for ion implantation
Authors:
Peter A. Seidl,
Arun Persaud,
Diego Di Domenico,
Johan Andreasson,
Qing Ji,
Wei Liang,
Di Ni,
Daniel Oberson,
Luke Raymond,
Gregory Scharfstein,
Alan M. M. Todd,
Amit Lal,
Thomas Schenkel
Abstract:
We report on the development of a radio frequency (RF) linear accelerator (linac) for multiple-ion beams that is made from stacks of low cost wafers. The accelerator lattice is comprised of RF-acceleration gaps and electrostatic quadrupole focusing elements that are fabricated on 10-cm wafers made from printed circuit board or silicon. We demonstrate ion acceleration with an effective gradient of…
▽ More
We report on the development of a radio frequency (RF) linear accelerator (linac) for multiple-ion beams that is made from stacks of low cost wafers. The accelerator lattice is comprised of RF-acceleration gaps and electrostatic quadrupole focusing elements that are fabricated on 10-cm wafers made from printed circuit board or silicon. We demonstrate ion acceleration with an effective gradient of about 0.5 MV per meter with an array of 3 by 3 beams. The total ion beam energies achieved to date are in the 10 keV range with total ion currents in tests with noble gases of ~0.1mA. We discuss scaling of the ion energy (by adding acceleration modules) and ion currents (with more beams) for applications of this multi-beam RF linac technology to ion implantation and surface modification of materials.
△ Less
Submitted 22 September, 2018;
originally announced September 2018.
-
Design and Implementation of a Thomson Parabola for Fluence Dependent Energy-Loss Measurements at the Neutralized Drift Compression eXperiment
Authors:
F. Treffert,
Q. Ji,
P. A. Seidl,
A. Persaud,
B. Ludewigt,
J. J. Barnard,
A. Friedman,
D. P. Grote,
E. P. Gilson,
I. D. Kaganovich,
A. Stepanov,
M. Roth,
T. Schenkel
Abstract:
The interaction of ion beams with matter includes the investigation of the basic principles of ion stopping in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stopping in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compressi…
▽ More
The interaction of ion beams with matter includes the investigation of the basic principles of ion stopping in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stopping in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compression eXperiment (NDCX-II) for ion energy-loss measurements at different ion beam fluences. The linear induction accelerator NDCX-II delivers 2 ns short, intense ion pulses, up to several tens of nC/pulse, or 10$^{10}$-10$^{11}$ ions, with a peak kinetic energy of ~1.1 MeV and a minimal spot size of 2 mm FWHM. For this particular accelerator the energy determination with conventional beam diagnostics, for example, time of flight measurements, is imprecise due to the non-trivial longitudinal phase space of the beam. In contrast, a Thomson parabola is well suited to reliably determine the beam energy distribution. The Thomson parabola differentiates charged particles by energy and charge-to-mass ratio, through deflection of charged particles by electric and magnetic fields. During first proof-of-principle experiments, we achieved to reproduce the average initial helium beam energy as predicted by computer simulations with a deviation of only 1.4 %. Successful energy-loss measurements with 1 μm thick Silicon Nitride foils show the suitability of the accelerator for such experiments. The initial ion energy was determined during a primary measurement without a target, while a second measurement, incorporating the target, was used to determine the transmitted energy. The energy-loss was then determined as the difference between the two energies.
△ Less
Submitted 28 September, 2018; v1 submitted 9 April, 2018;
originally announced April 2018.
-
Field-free Three-Dimensional Orientation of Asymmetric-Top Molecules
Authors:
Kang Lin,
Ilia Tutunnikov,
Junjie Qiang,
Junyang Ma,
Qiying Song,
Qinying Ji,
Wenbin Zhang,
Hanxiao Li,
Fenghao Sun,
Xiaochun Gong,
Hui Li,
Peifen Lu,
Heping Zeng,
Yehiam Prior,
Ilya Sh. Averbukh,
Jian Wu
Abstract:
Alignment and orientation of molecules by intense, ultrashort laser fields are crucial for a variety of applications in physics and chemistry. These include control of high harmonics generation, molecular orbitals tomography, control of molecular photoionization and dissociation processes, production of "molecular movies" with the help of X-ray free-electron laser sources and ultrafast electron di…
▽ More
Alignment and orientation of molecules by intense, ultrashort laser fields are crucial for a variety of applications in physics and chemistry. These include control of high harmonics generation, molecular orbitals tomography, control of molecular photoionization and dissociation processes, production of "molecular movies" with the help of X-ray free-electron laser sources and ultrafast electron diffraction of relativistic electrons. While the dynamics of laser-induced molecular alignment has been extensively studied and demonstrated, molecular orientation is a much more challenging task, especially for asymmetric-top molecules. Here we report the first experimental demonstration of a field-free, all-optical three-dimensional orientation of asymmetric-top molecules by means of phase-locked cross-polarized two-color laser pulses. In addition to the conventional integrated orientation factor, we report the differential degree of orientation which is not amenable to optical measurements, but is readily accessible in our angle-resolved imaging technique. Our scheme applies to a wide class of asymmetric molecules and opens new ways towards controlling their orientation, eventually leading to direct imaging of structure of gas-phase molecules using advanced free electron laser beams with extremely high spatiotemporal resolution.
△ Less
Submitted 21 March, 2018;
originally announced March 2018.
-
Waferscale Electrostatic Quadrupole Array for Multiple Ion Beam Manipulation
Authors:
K. B. Vinayakumar,
A. Persaud,
P. A. Seidl,
Q. Ji,
W. L. Waldron,
T. Schenkel,
S. Ardanuc,
A. Lal
Abstract:
We report on the first through-wafer silicon-based Electrostatic Quadrupole Array (ESQA) to focus high energy ion beams. This device is a key enabler for a wafer based accelerator architecture that lends itself to orders-of-magnitude reduction in cost, volume and weight of charged particle accelerators. ESQs are a key building block in developing compact Multiple Electrostatic Quadrupole Array Lin…
▽ More
We report on the first through-wafer silicon-based Electrostatic Quadrupole Array (ESQA) to focus high energy ion beams. This device is a key enabler for a wafer based accelerator architecture that lends itself to orders-of-magnitude reduction in cost, volume and weight of charged particle accelerators. ESQs are a key building block in developing compact Multiple Electrostatic Quadrupole Array Linear Accelerator (MEQALAC) [1]. In a MEQALAC electrostatic forces are used to focus ions, and electrostatic field scaling permits high beam current densities by decreasing the beam aperture size for a given peak electric field set by breakdown limitations. Using multiple parallel beams, each totaling to an area A, can result in higher total beam current compared to a single aperture beam of the same area. Smaller dimensions also allow for higher focusing electric field gradients and therefore higher average beam current density. Here we demonstrate that Deep Reactive Ion Etching (DRIE) micromachined pillar electrodes, electrically isolated by silicon-nitride thin films enable higher performance ESQA with waferscale scalability. The fabricated ESQA are able to hold up to1 kV in air. A 3*3 array of 12 keV argon ion beams are focused in a wafer accelerator unit cell to pave the way for multiple wafer accelerator.
△ Less
Submitted 7 February, 2018;
originally announced February 2018.
-
Demonstration of a compact linear accelerator
Authors:
P. A. Seidl,
A. Persaud,
W. Ghiorso,
Q. Ji,
W. L. Waldron,
A. Lal,
K. B. Vinayakumar,
T. Schenkel
Abstract:
Recently, we presented a new approach for a compact radio-frequency (RF) accelerator structure and demonstrated the functionality of the individual components: acceleration units and focusing elements. In this paper, we combine these units to form a working accelerator structure including a matching section between the ion source extraction grids and the RF-acceleration unit. The matching section…
▽ More
Recently, we presented a new approach for a compact radio-frequency (RF) accelerator structure and demonstrated the functionality of the individual components: acceleration units and focusing elements. In this paper, we combine these units to form a working accelerator structure including a matching section between the ion source extraction grids and the RF-acceleration unit. The matching section consist of six electrostatic quadrupoles (ESQs) fabricated using 3D-printing techniques. The matching section enables us to capture twice the amount of beam and match the beam envelope to conditions for an acceleration lattice. We present data from an integrated accelerator consisting of the source, matching section, and an ESQ doublet sandwiched between two RF-acceleration units.
△ Less
Submitted 1 February, 2018;
originally announced February 2018.
-
Optimizing Beam Transport in Rapidly Compressing Beams on the Neutralized Drift Compression Experiment - II
Authors:
Anton D. Stepanov,
Erik P. Gilson,
Igor D. Kaganovich,
Peter A. Seidl,
Arun Persaud,
Qing Ji,
Thomas Schenkel,
Alex Friedman,
John J. Barnard,
David P. Grote
Abstract:
The Neutralized Drift Compression Experiment-II (NDCX-II) is an induction linac that generates intense pulses of 1.2 MeV helium ions for heating matter to extreme conditions. Here, we present recent results on optimizing beam transport. The NDCX-II beamline includes a 1-meter-long drift section downstream of the last transport solenoid, which is filled with charge-neutralizing plasma that enables…
▽ More
The Neutralized Drift Compression Experiment-II (NDCX-II) is an induction linac that generates intense pulses of 1.2 MeV helium ions for heating matter to extreme conditions. Here, we present recent results on optimizing beam transport. The NDCX-II beamline includes a 1-meter-long drift section downstream of the last transport solenoid, which is filled with charge-neutralizing plasma that enables rapid longitudinal compression of an intense ion beam against space-charge forces. The transport section on NDCX-II consists of 28 solenoids. Finding optimal field settings for a group of solenoids requires knowledge of the envelope parameters of the beam. Imaging the beam on scintillator gives the radius of the beam, but the envelope angle dr/dz is not measured directly. We demonstrate how the parameters of the beam envelope (r, dr/dz, and emittance) can be reconstructed from a series of images taken at varying B-field strengths of a solenoid upstream of the scintillator. We use this technique to evaluate emittance at several points in the NDCX-II beamline and for optimizing the trajectory of the beam at the entry of the plasma-filled drift section.
△ Less
Submitted 1 November, 2017;
originally announced November 2017.
-
Irradiation of Materials with Short, Intense Ion pulses at NDCX-II
Authors:
P. A. Seidl,
Q. Ji,
A. Persaud,
E. Feinberg,
B. Ludewigt,
M. Silverman,
A. Sulyman,
W. L. Waldron,
T. Schenkel,
J. J. Barnard,
A. Friedman,
D. P. Grote,
E. P. Gilson,
I. D. Kaganovich,
A. D. Stepanov,
F. Treffert,
M. Zimmer
Abstract:
We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and report on recent target experiments on beam driven melting and transmission ion energy loss measurements with nanosecond and millimeter-scale ion beam pulses and thin tin foils. Bunches with around 10^11 ions, 1-mm radius, and 2-30 ns FWHM duration have been creat…
▽ More
We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and report on recent target experiments on beam driven melting and transmission ion energy loss measurements with nanosecond and millimeter-scale ion beam pulses and thin tin foils. Bunches with around 10^11 ions, 1-mm radius, and 2-30 ns FWHM duration have been created with corresponding fluences in the range of 0.1 to 0.7 J/cm^2. To achieve these short pulse durations and mm-scale focal spot radii, the 1.1 MeV He+ ion beam is neutralized in a drift compression section, which removes the space charge defocusing effect during final compression and focusing. The beam space charge and drift compression techniques resemble necessary beam conditions and manipulations in heavy ion inertial fusion accelerators. Quantitative comparison of detailed particle-in-cell simulations with the experiment play an important role in optimizing accelerator performance.
△ Less
Submitted 12 April, 2017; v1 submitted 16 March, 2017;
originally announced March 2017.
-
Luminosity measurements for the R scan experiment at BESIII
Authors:
M. Ablikim,
M. N. Achasov,
S. Ahmed,
X. C. Ai,
O. Albayrak,
M. Albrecht,
D. J. Ambrose,
A. Amoroso,
F. F. An,
Q. An,
J. Z. Bai,
O. Bakina,
R. Baldini Ferroli,
Y. Ban,
D. W. Bennett,
J. V. Bennett,
N. Berger,
M. Bertani,
D. Bettoni,
J. M. Bian,
F. Bianchi,
E. Boger,
I. Boyko,
R. A. Briere,
H. Cai
, et al. (405 additional authors not shown)
Abstract:
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measur…
▽ More
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measured at the different c.m. energies, individually. The results are the important inputs for R value and $J/ψ$ resonance parameter measurements.
△ Less
Submitted 11 February, 2017;
originally announced February 2017.
-
Staging of RF-accelerating units in a MEMS-based ion accelerator
Authors:
A. Persaud,
P. A. Seidl,
Q. Ji,
E. Feinberg,
W. L. Waldron,
T. Schenkel,
S. Ardanuc,
K. B. Vinayakumar,
A. Lal
Abstract:
Multiple Electrostatic Quadrupole Array Linear Accelerators (MEQALACs) provide an opportunity to realize compact radio-frequency (RF) accelerator structures that can deliver very high beam currents. MEQALACs have been previously realized with acceleration gap distances and beam aperture sizes of the order of centimeters. Through advances in Micro-Electro-Mechanical Systems (MEMS) fabrication, MEQA…
▽ More
Multiple Electrostatic Quadrupole Array Linear Accelerators (MEQALACs) provide an opportunity to realize compact radio-frequency (RF) accelerator structures that can deliver very high beam currents. MEQALACs have been previously realized with acceleration gap distances and beam aperture sizes of the order of centimeters. Through advances in Micro-Electro-Mechanical Systems (MEMS) fabrication, MEQALACs can now be scaled down to the sub-millimeter regime and batch processed on wafer substrates. In this paper, we show first results from using three RF stages in a compact MEMS-based ion accelerator. The results presented show proof-of-concept with accelerator structures formed from printed circuit boards using a 3x3 beamlet arrangement and noble gas ions at 10 keV. We present a simple model to describe the measured results. The model is then used to examine some of the aspects of this approach, such as possible effects of alignment errors. We also discuss some of the scaling behaviour of a compact MEQALAC. The MEMS-based approach enables a low-cost, highly versatile accelerator covering a wide range of beam energies and currents. Applications include ion-beam analysis, mass spectrometry, materials processing, and at very high beam powers, plasma heating.
△ Less
Submitted 31 October, 2017; v1 submitted 1 February, 2017;
originally announced February 2017.
-
A compact linear accelerator based on a scalable microelectromechanical-system RF-structure
Authors:
A. Persaud,
Q. Ji,
E. Feinberg,
P. A. Seidl,
W. L. Waldron,
A. Lal,
K. B. Vinayakumar,
S. Ardanuc,
D. A. Hammer,
T. Schenkel
Abstract:
A new approach for a compact radio-frequency (RF) accelerator structure is presented. The new accelerator architecture is based on the Multiple Electrostatic Quadrupole Array Linear Accelerator (MEQALAC) structure that was first developed in the 1980s. The MEQALAC utilized RF resonators producing the accelerating fields and providing for higher beam currents through parallel beamlets focused using…
▽ More
A new approach for a compact radio-frequency (RF) accelerator structure is presented. The new accelerator architecture is based on the Multiple Electrostatic Quadrupole Array Linear Accelerator (MEQALAC) structure that was first developed in the 1980s. The MEQALAC utilized RF resonators producing the accelerating fields and providing for higher beam currents through parallel beamlets focused using arrays of electrostatic quadrupoles (ESQs). While the early work obtained ESQs with lateral dimensions on the order of a few centimeters, using printed circuits board (PCB), we reduce the characteristic dimension to the millimeter regime, while massively scaling up the potential number of parallel beamlets. Using Microelectromechanical systems scalable fabrication approaches, we are working on further reducing the characteristic dimension to the sub-millimeter regime. The technology is based on RF-acceleration components and ESQs implemented in PCB or silicon wafers where each beamlet passes through beam apertures in the wafer. The complete accelerator is then assembled by stacking these wafers. This approach has the potential for fast and inexpensive batch fabrication of the components and flexibility in system design for application specific beam energies and currents. For prototyping the accelerator architecture, the components have been fabricated using PCB. In this paper, we present proof of concept results of the principal components using PCB: RF acceleration and ESQ focusing. Ongoing developments on implementing components in silicon and scaling of the accelerator technology to high currents and beam energies are discussed.
△ Less
Submitted 29 June, 2017; v1 submitted 30 October, 2016;
originally announced October 2016.
-
Recent Experiments At Ndcx-II: Irradiation Of Materials Using Short, Intense Ion Beams
Authors:
P. A. Seidl,
Q. Ji,
A. Persaud,
E. Feinberg,
B. Ludewigt,
M. Silverman,
A. Sulyman,
W. L. Waldron,
T. Schenkel,
J. J. Barnard,
A. Friedman,
D. P. Grote,
E. P. Gilson,
I. D. Kaganovich,
A. Stepanov,
F. Treffert,
M. Zimmer
Abstract:
We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and summarize recent studies of material properties created with nanosecond and millimeter-scale ion beam pulses. The scientific topics being explored include the dynamics of ion induced damage in materials, materials synthesis far from equilibrium, warm dense matter…
▽ More
We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and summarize recent studies of material properties created with nanosecond and millimeter-scale ion beam pulses. The scientific topics being explored include the dynamics of ion induced damage in materials, materials synthesis far from equilibrium, warm dense matter and intense beam-plasma physics. We summarize the improved accelerator performance, diagnostics and results of beam-induced irradiation of thin samples of, e.g., tin and silicon. Bunches with over 3x10^10 ions, 1- mm radius, and 2-30 ns FWHM duration have been created. To achieve these short pulse durations and mm-scale focal spot radii, the 1.2 MeV He+ ion beam is neutralized in a drift compression section which removes the space charge defocusing effect during final compression and focusing. Quantitative comparison of detailed particle-in-cell simulations with the experiment play an important role in optimizing accelerator performance; these keep pace with the accelerator repetition rate of ~1/minute.
△ Less
Submitted 17 October, 2016;
originally announced October 2016.
-
Spatiotemporal steering of photoelectron emission in multiphoton above-threshold ionization
Authors:
Xiaochun Gong,
Cheng Lin,
Mingming Liu,
Qiying Song,
Kang Lin,
Qinying Ji,
Wenbin Zhang,
Junyang Ma,
Peifen Lu,
Yunquan Liu,
Feng He,
Heping Zeng,
Weifeng Yang,
Jian Wu
Abstract:
We experimentally demonstrate spatiotemporal steering of photoelectron emission in multiphoton above-threshold single ionization of atoms exposed to a phase-controlled orthogonally polarized two-color (OTC) laser pulse. Spatial and energy resolved photoelectron angular distributions are measured as a function of the laser phase, allowing us to look into the fine structures and emission dynamics. T…
▽ More
We experimentally demonstrate spatiotemporal steering of photoelectron emission in multiphoton above-threshold single ionization of atoms exposed to a phase-controlled orthogonally polarized two-color (OTC) laser pulse. Spatial and energy resolved photoelectron angular distributions are measured as a function of the laser phase, allowing us to look into the fine structures and emission dynamics. The slow and fast photoelectrons, distinguished by the energy larger or smaller than 2Up with Up being the ponderomotive energy of a free electron in the laser field, have distinct spatiotemporal dependences of the laser waveform. The phase-of-phase of the slow electron oscillates as functions of both the energy and emission direction, however, the fast electron present rather flat phase structure which merely depends on its emission direction. Three-dimensional generalized quantum trajectory Monte Carlo simulations are performed to explore the sub-cycle dynamics of the electron emission in the phase-controlled OTC pulse.
△ Less
Submitted 4 March, 2017; v1 submitted 19 July, 2016;
originally announced July 2016.
-
Disentangling the role of laser coupling in directional breaking of molecules
Authors:
Qiying Song,
Zhichao Li,
Sen Cui,
Peifen Lu,
Xiaochun Gong,
Qinying Ji,
Kang Lin,
Wenbin Zhang,
Junyang Ma,
Haifeng Pan,
Jingxin Ding,
Matthias F. Kling,
Heping Zeng,
Feng He,
Jian Wu
Abstract:
The directional control of molecular dissociation with the laser electric field waveform is a paradigm and was demonstrated for a variety of molecules. In most cases, the directional control occurs via a dissociative ionization pathway. The role of laser-induced coupling of electronic states in the dissociating ion versus selective ionization of oriented neutral molecules, however, could not be di…
▽ More
The directional control of molecular dissociation with the laser electric field waveform is a paradigm and was demonstrated for a variety of molecules. In most cases, the directional control occurs via a dissociative ionization pathway. The role of laser-induced coupling of electronic states in the dissociating ion versus selective ionization of oriented neutral molecules, however, could not be distinguished for even small heteronuclear molecules such as CO. Here, we introduce a technique, using elliptically polarized pump and linearly polarized two-color probe pulses that unambiguously distinguishes the roles of laser-induced state coupling and selective ionization. The measured photoelectron momentum distributions governed by the light polarizations allow us to coincidently identify the ionization and dissociation from the pump and probe pulses. Directional dissociation of CO+ as a function of the relative phase of the linearly polarized two-color pulse is observed for both parallel and orthogonally oriented molecules. We find that the laser-induced coupling of various electronic states of CO+ plays an important role for the observed directional bond breaking, which is verified by quantum calculations.
△ Less
Submitted 23 November, 2016; v1 submitted 30 June, 2016;
originally announced June 2016.
-
Molecular echoes in space and time
Authors:
Kang Lin,
Peifen Lu,
Junyang Ma,
Xiaochun Gong,
Qiying Song,
Qinying Ji,
Wenbin Zhang,
Heping Zeng,
Jian Wu,
Gabriel Karras,
Guillaume Siour,
Jean-Michel Hartmann,
Olivier Faucher,
Erez Gershnabel,
Yehiam Prior,
Ilya Sh. Averbukh
Abstract:
Mountain echoes are a well-known phenomenon, where an impulse excitation is mirrored by the rocks to generate a replica of the original stimulus, often with reverberating recurrences. For spin echoes in magnetic resonance and photon echoes in atomic and molecular systems the role of the mirror is played by a second, time delayed pulse which is able to reverse the ow of time and recreate the origin…
▽ More
Mountain echoes are a well-known phenomenon, where an impulse excitation is mirrored by the rocks to generate a replica of the original stimulus, often with reverberating recurrences. For spin echoes in magnetic resonance and photon echoes in atomic and molecular systems the role of the mirror is played by a second, time delayed pulse which is able to reverse the ow of time and recreate the original event. Recently, laser-induced rotational alignment and orientation echoes were introduced for molecular gases, and discussed in terms of rotational-phase-space filamentation. Here we present, for the first time, a direct spatiotemporal analysis of various molecular alignment echoes by means of coincidence Coulomb explosion imaging. We observe hitherto unreported spatially rotated echoes, that depend on the polarization direction of the pump pulses, and find surprising imaginary echoes at negative times.
△ Less
Submitted 27 June, 2016;
originally announced June 2016.
-
Short-Pulse, Compressed Ion Beams at the Neutralized Drift Compression Experiment
Authors:
Peter A Seidl,
John J Barnard,
Ronald C Davidson,
Alex Friedman,
Erik P Gilson,
David Grote,
Qing Ji,
I D Kaganovich,
Arun Persaud,
William L Waldron,
Thomas Schenkel
Abstract:
We have commenced experiments with intense short pulses of ion beams on the Neutralized Drift Compression Experiment (NDCX-II) at Lawrence Berkeley National Laboratory, with 1-mm beam spot size within 2.5 ns full-width at half maximum. The ion kinetic energy is 1.2 MeV. To enable the short pulse duration and mm-scale focal spot radius, the beam is neutralized in a 1.5-meter-long drift compression…
▽ More
We have commenced experiments with intense short pulses of ion beams on the Neutralized Drift Compression Experiment (NDCX-II) at Lawrence Berkeley National Laboratory, with 1-mm beam spot size within 2.5 ns full-width at half maximum. The ion kinetic energy is 1.2 MeV. To enable the short pulse duration and mm-scale focal spot radius, the beam is neutralized in a 1.5-meter-long drift compression section following the last accelerator cell. A short-focal-length solenoid focuses the beam in the presence of the volumetric plasma that is near the target. In the accelerator, the line-charge density increases due to the velocity ramp imparted on the beam bunch. The scientific topics to be explored are warm dense matter, the dynamics of radiation damage in materials, and intense beam and beam-plasma physics including select topics of relevance to the development of heavy-ion drivers for inertial fusion energy. Below the transition to melting, the short beam pulses offer an opportunity to study the multi-scale dynamics of radiation-induced damage in materials with pump-probe experiments, and to stabilize novel metastable phases of materials when short-pulse heating is followed by rapid quenching. First experiments used a lithium ion source; a new plasma-based helium ion source shows much greater charge delivered to the target.
△ Less
Submitted 7 January, 2016;
originally announced January 2016.
-
Visualizing molecular unidirectional rotation
Authors:
Kang Lin,
Qiying Song,
Xiaochun Gong,
Qinying Ji,
Haifeng Pan,
Jingxin Ding,
Heping Zeng,
Jian Wu
Abstract:
A molecule can be optically accelerated to rotate unidirectionally at a frequency of a few terahertzes which is many orders higher than the classical mechanical rotor. Such a photon-induced ultrafast molecular unidirectional rotation has been well explored as a controllable spin of the molecular nuclear wave packet. Although it has been observed for more than 10 years, a complete imaging of the un…
▽ More
A molecule can be optically accelerated to rotate unidirectionally at a frequency of a few terahertzes which is many orders higher than the classical mechanical rotor. Such a photon-induced ultrafast molecular unidirectional rotation has been well explored as a controllable spin of the molecular nuclear wave packet. Although it has been observed for more than 10 years, a complete imaging of the unidirectional rotating nuclear wave packet is still missing, which is essentially the cornerstone of all the exploring applications. Here, for the first time, we experimentally visualize the time-dependent evolution of the double-pulse excited molecular unidirectional rotation by Coulomb explosion imaging the rotational nuclear wave packet. Our results reveal comprehensive details undiscovered in pioneering measurements, which exhibits as a joint of the quantum revival of the impulsively aligned rotational wave packet and its unidirectional rotation following the angular momentum conservation. The numerical simulations well reproduce the experimental observations and intuitively revivify the thoroughgoing evolution of the rotational wave packet.
△ Less
Submitted 13 November, 2014;
originally announced November 2014.
-
Initial conformation of kinesin's neck linker
Authors:
Yi-Zhao Geng,
Qing Ji,
Shu-Xia Liu,
Shiwei Yan
Abstract:
How ATP binding initiates the docking process of kinesin's neck linker is a key question in understanding kinesin mechanism. It is believed that the formation of an extra turn structure by the first three amino acids of neck linker (LYS325, THR326, ILE327 in 2KIN) is crucial for initiating the docking process. But the initial conformation of neck linker (specially the three amino acids of the extr…
▽ More
How ATP binding initiates the docking process of kinesin's neck linker is a key question in understanding kinesin mechanism. It is believed that the formation of an extra turn structure by the first three amino acids of neck linker (LYS325, THR326, ILE327 in 2KIN) is crucial for initiating the docking process. But the initial conformation of neck linker (specially the three amino acids of the extra turn) and the neck linker docking initiation mechanism remain unclear. By using molecular dynamics method, we investigate the initial conformation of kinesin's neck linker in the docking process. We find that, in the initial state of NL docking process, NL still has interactions with β0 and forms a conformation similar to the "cover-neck bundle" structure proposed by Hwang et al. [Structure 2008, 16(1): 62-71]. From this initial structure, the docking of the "cover-neck bundle" structure can be achieved. The motor head provides a forward force on the initial cover-neck bundle structure through ATP-induced rotation. This force, together with the hydrophobic interaction of ILE327 with the hydrophobic pocket on the motor head, drives the formation of the extra turn and initiates the neck linker docking process.
△ Less
Submitted 20 September, 2013;
originally announced September 2013.
-
Measurements of Baryon Pair Decays of $χ_{cJ}$ Mesons
Authors:
M. Ablikim,
M. N. Achasov,
O. Albayrak,
D. J. Ambrose,
F. F. An,
Q. An,
J. Z. Bai,
Y. Ban,
J. Becker,
J. V. Bennett,
M. Bertani,
J. M. Bian,
E. Boger,
O. Bondarenko,
I. Boyko,
R. A. Briere,
V. Bytev,
X. Cai,
O. Cakir,
A. Calcaterra,
G. F. Cao,
S. A. Cetin,
J. F. Chang,
G. Chelkov,
G. Chen
, et al. (326 additional authors not shown)
Abstract:
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$,…
▽ More
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$, $(20.8 \pm 1.6 \pm 2.3)\times 10^{-5}$; $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{0}\barΣ^{0})$ = $(47.8 \pm 3.4 \pm 3.9)\times 10^{-5}$, $(3.8 \pm 1.0 \pm 0.5)\times 10^{-5}$, $(4.0 \pm 1.1 \pm 0.5) \times 10^{-5}$; and $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{+}\barΣ^{-})$ = $(45.4 \pm 4.2 \pm 3.0)\times 10^{-5}$, $(5.4 \pm 1.5 \pm 0.5)\times 10^{-5}$, $(4.9 \pm 1.9 \pm 0.7)\times 10^{-5}$, where the first error is statistical and the second is systematic. Upper limits on the branching fractions for the decays of $χ_{c1,2}\rightarrowΣ^{0}\barΣ^{0}$, $Σ^{+}\barΣ^{-}$, are estimated to be $\cal{B}$$(χ_{c1}\rightarrowΣ^{0}\barΣ^{0}) < 6.2\times 10^{-5}$, $\cal{B}$$(χ_{c2}\rightarrowΣ^{0}\barΣ^{0}) < 6.5\times 10^{-5}$, $\cal{B}$$(χ_{c1}\rightarrowΣ^{+}\barΣ^{-}) < 8.7\times 10^{-5}$ and $\cal{B}$$(χ_{c2}\rightarrowΣ^{+}\barΣ^{-}) < 8.8\times 10^{-5}$ at the 90% confidence level.
△ Less
Submitted 4 March, 2013; v1 submitted 9 November, 2012;
originally announced November 2012.
-
EGAM Induced by Energetic-electrons and Nonlinear Interactions among EGAM, BAEs and Tearing Modes in a Toroidal Plasma
Authors:
W. Chen,
X. T. Ding,
L. M. Yu,
X. Q. Ji,
J. Q. Dong,
Q. W. Yang,
Yi. Liu,
L. W. Yan,
Y. Zhou,
W. Li,
X. M. Song,
S. Y. Chen,
J. Cheng,
Z. B. Shi,
X. R. Duan,
HL-2A team
Abstract:
In this letter, it is reported that the first experimental results are associated with the GAM induced by energetic electrons (eEGAM) in HL-2A Ohmic plasma. The energetic-electrons are generated by parallel electric fields during magnetic reconnection associated with tearing mode (TM). The eEGAM localizes in the core plasma, i.e. in the vicinity of q=2 surface, and is very different from one excit…
▽ More
In this letter, it is reported that the first experimental results are associated with the GAM induced by energetic electrons (eEGAM) in HL-2A Ohmic plasma. The energetic-electrons are generated by parallel electric fields during magnetic reconnection associated with tearing mode (TM). The eEGAM localizes in the core plasma, i.e. in the vicinity of q=2 surface, and is very different from one excited by the drift-wave turbulence in the edge plasma. The analysis indicated that the eEGAM is provided with the magnetic components, whose intensities depend on the poloidal angles, and its mode numbers are jm/nj=2/0. Further, there exist intense nonlinear interactions among eEGAM, BAEs and strong tearing modes (TMs). These new findings shed light on the underlying physics mechanism for the excitation of the low frequency (LF) Alfvénic and acoustic uctuations.
△ Less
Submitted 21 March, 2012;
originally announced March 2012.