-
Direct Radiation Pressure Measurements for Lightsail Membranes
Authors:
Lior Michaeli,
Ramon Gao,
Michael D. Kelzenberg,
Claudio U. Hail,
Adrien Merkt,
John E. Sader,
Harry A. Atwater
Abstract:
Ultrathin lightsails propelled by laser radiation pressure to relativistic speeds are currently the most promising route for flyby-based exoplanet exploration. However, there has been a notable lack of experimental characterization of key parameters essential for lightsail propulsion. Therefore, a model platform for optomechanical characterization of lightsail prototypes made from realistic materi…
▽ More
Ultrathin lightsails propelled by laser radiation pressure to relativistic speeds are currently the most promising route for flyby-based exoplanet exploration. However, there has been a notable lack of experimental characterization of key parameters essential for lightsail propulsion. Therefore, a model platform for optomechanical characterization of lightsail prototypes made from realistic materials is needed. We propose an approach for simultaneous measurement of optical forces and driving powers, which capitalizes on the multiphysics dynamics induced by the driving laser beam. By modelling the lightsail with a 50-nm thick silicon nitride membrane suspended by compliant micromechanical springs, we quantify force from off-resonantly driven displacement and power from heating-induced mechanical mode softening. This approach allows us to calibrate the measured forces to the driving powers by operating the device as a mechanical bolometer. We report radiation pressure forces of 80 fN using a collimated pump beam of 100 W/cm2 and noise-robust common-path interferometry. As lightsails will inevitably experience non-normal forces, we quantify the effects of incidence angle and spot size on the optical force and explain the nonintuitive trend by edge scattering. Our results provide a framework for comprehensive lightsail characterization and laboratory optomechanical manipulation of macroscopic objects by radiation pressure forces.
△ Less
Submitted 29 February, 2024;
originally announced March 2024.
-
Dynamically Stable Radiation Pressure Propulsion of Flexible Lightsails for Interstellar Exploration
Authors:
Ramon Gao,
Michael D. Kelzenberg,
Harry A. Atwater
Abstract:
Lightsail spacecraft, propelled to relativistic velocities via photon pressure using high power density laser radiation, offer a potentially new route to space exploration within and beyond the solar system, extending to interstellar distances. Such missions will require meter-scale lightsails of submicron thickness, posing substantial challenges for materials science and engineering. We analyze t…
▽ More
Lightsail spacecraft, propelled to relativistic velocities via photon pressure using high power density laser radiation, offer a potentially new route to space exploration within and beyond the solar system, extending to interstellar distances. Such missions will require meter-scale lightsails of submicron thickness, posing substantial challenges for materials science and engineering. We analyze the structural and photonic design of flexible lightsails, developing a mesh-based multiphysics simulator based on linear elastic theory, treating the lightsail as a flexible membrane rather than a rigid body. We find that flexible lightsail membranes can be spin stabilized to prevent shape collapse during acceleration, and that certain lightsail shapes and designs offer beam-riding stability despite the deformations caused by photon pressure and thermal expansion. Excitingly, nanophotonic lightsails based on planar silicon nitride membranes patterned with suitably designed optical metagratings exhibit both mechanically and dynamically stable propulsion along the pump laser axis. These advances suggest that laser-driven acceleration of membrane-like lightsails to the relativistic speeds needed to access interstellar distances is conceptually feasible, and that fabrication of such lightsails may be within the reach of modern microfabrication technology.
△ Less
Submitted 21 January, 2023;
originally announced January 2023.
-
A new metal transfer process for van der Waals contacts to vertical Schottky-junction transition metal dichalcogenide photovoltaics
Authors:
Cora M. Went,
Joeson Wong,
Phillip R. Jahelka,
Michael Kelzenberg,
Souvik Biswas,
Harry A. Atwater
Abstract:
Two-dimensional transition metal dichalcogenides are promising candidates for ultrathin optoelectronic devices due to their high absorption coefficients and intrinsically passivated surfaces. To maintain these near-perfect surfaces, recent research has focused on fabricating contacts that limit Fermi-level pinning at the metal-semiconductor interface. Here, we develop a new, simple procedure for t…
▽ More
Two-dimensional transition metal dichalcogenides are promising candidates for ultrathin optoelectronic devices due to their high absorption coefficients and intrinsically passivated surfaces. To maintain these near-perfect surfaces, recent research has focused on fabricating contacts that limit Fermi-level pinning at the metal-semiconductor interface. Here, we develop a new, simple procedure for transferring metal contacts that does not require aligned lithography. Using this technique, we fabricate vertical Schottky-junction $WS_2$ solar cells with Ag and Au as asymmetric work function contacts. Under laser illumination, we observe rectifying behavior and open-circuit voltage above 500 mV in devices with transferred contacts, in contrast to resistive behavior and open-circuit voltage below 15 mV in devices with evaporated contacts. One-sun measurements and device simulation results indicate that this metal transfer process could enable high-specific-power vertical Schottky-junction transition metal dichalcogenide photovoltaics, and we anticipate that this technique will lead to advances for two-dimensional devices more broadly.
△ Less
Submitted 4 April, 2019; v1 submitted 19 March, 2019;
originally announced March 2019.
-
Lightweight Carbon Fiber Mirrors for Solar Concentrator Applications
Authors:
Nina Vaidya,
Michael D. Kelzenberg,
Pilar Espinet-González,
Tatiana G. Vinogradova,
Jing-Shun Huang,
Christophe Leclerc,
Ali Naqavi,
Emily C. Warmann,
Sergio Pellegrino,
Harry A. Atwater
Abstract:
Lightweight parabolic mirrors for solar concentrators have been fabricated using carbon fiber reinforced polymer (CFRP) and a nanometer scale optical surface smoothing technique. The smoothing technique improved the surface roughness of the CFRP surface from ~3 μm root mean square (RMS) for as-cast to ~5 nm RMS after smoothing. The surfaces were then coated with metal, which retained the sub-wavel…
▽ More
Lightweight parabolic mirrors for solar concentrators have been fabricated using carbon fiber reinforced polymer (CFRP) and a nanometer scale optical surface smoothing technique. The smoothing technique improved the surface roughness of the CFRP surface from ~3 μm root mean square (RMS) for as-cast to ~5 nm RMS after smoothing. The surfaces were then coated with metal, which retained the sub-wavelength surface roughness, to produce a high-quality specular reflector. The mirrors were tested in an 11x geometrical concentrator configuration and achieved an optical efficiency of 78% under an AM0 solar simulator. With further development, lightweight CFRP mirrors will enable dramatic improvements in the specific power, power per unit mass, achievable for concentrated photovoltaics in space.
△ Less
Submitted 1 October, 2018;
originally announced October 2018.
-
Extremely broadband ultralight thermally emissive metasurfaces
Authors:
Ali Naqavi,
Samuel P. Loke,
Michael D. Kelzenberg,
Dennis M. Callahan,
Emily C. Warmann,
Pilar Espinet-González,
Nina Vaidya,
Tatiana A. Roy,
Jing-Shun Huang,
Tatiana G. Vinogradova,
Alexander J. Messer,
Harry A. Atwater
Abstract:
We report the design, fabrication and characterization of ultralight highly emissive metaphotonic structures with record-low mass/area that emit thermal radiation efficiently over a broad spectral (2 to 35 microns) and angular (0-60 degrees) range. The structures comprise one to three pairs of alternating nanometer-scale metallic and dielectric layers, and have measured effective 300 K hemispheric…
▽ More
We report the design, fabrication and characterization of ultralight highly emissive metaphotonic structures with record-low mass/area that emit thermal radiation efficiently over a broad spectral (2 to 35 microns) and angular (0-60 degrees) range. The structures comprise one to three pairs of alternating nanometer-scale metallic and dielectric layers, and have measured effective 300 K hemispherical emissivities of 0.7 to 0.9. To our knowledge, these structures, which are all subwavelength in thickness are the lightest reported metasurfaces with comparable infrared emissivity. The superior optical properties, together with their mechanical flexibility, low outgassing, and low areal mass, suggest that these metasurfaces are candidates for thermal management in applications demanding of ultralight flexible structures, including aerospace applications, ultralight photovoltaics, lightweight flexible electronics, and textiles for thermal insulation.
△ Less
Submitted 8 October, 2017;
originally announced October 2017.
