Showing 1–25 of 25 results for author: Kiehn, M

Argonne Pixel Tracking Telescope at the Fermilab Test Beam Facility

Authors: Vallary Bhopatkar, Mathieu Benoit, Binbin Dong, Moritz Kiehn, Joseph Lambert, Jessica Metcalfe, Joseph Muse, Daniel Wilbern

Abstract: The Argonne Pixel Tracking Telescope is installed at the Fermilab Test Beam Facility. The telescope consists of six planar n^{+}-in-n silicon sensors with a pixel size of 250 {\times} 50 μみゅーm^{2}. The instrumentation of the telescope is described including the electrical and mechanical setups. A 120 GeV proton beam is used to evaluate the telescope performance using criteria such as the cluster size… ▽ More The Argonne Pixel Tracking Telescope is installed at the Fermilab Test Beam Facility. The telescope consists of six planar n^{+}-in-n silicon sensors with a pixel size of 250 {\times} 50 μみゅーm^{2}. The instrumentation of the telescope is described including the electrical and mechanical setups. A 120 GeV proton beam is used to evaluate the telescope performance using criteria such as the cluster size, pixel tracking efficiency, and spatial resolution. The spatial resolution of the telescope is measured to be 72 μみゅーm {\times} 13 μみゅーm. △ Less

Submitted 30 August, 2022; v1 submitted 10 February, 2022; originally announced February 2022.

A Common Tracking Software Project

Authors: Xiaocong Ai, Corentin Allaire, Noemi Calace, Angéla Czirkos, Irina Ene, Markus Elsing, Ralf Farkas, Louis-Guillaume Gagnon, Rocky Garg, Paul Gessinger, Hadrien Grasland, Heather M. Gray, Christian Gumpert, Julia Hrdinka, Benjamin Huth, Moritz Kiehn, Fabian Klimpel, Attila Krasznahorkay, Robert Langenberg, Charles Leggett, Joana Niermann, Joseph D. Osborn, Andreas Salzburger, Bastian Schlag, Lauren Tompkins , et al. (7 additional authors not shown)

Abstract: The reconstruction of the trajectories of charged particles, or track reconstruction, is a key computational challenge for particle and nuclear physics experiments. While the tuning of track reconstruction algorithms can depend strongly on details of the detector geometry, the algorithms currently in use by experiments share many common features. At the same time, the intense environment of the Hi… ▽ More The reconstruction of the trajectories of charged particles, or track reconstruction, is a key computational challenge for particle and nuclear physics experiments. While the tuning of track reconstruction algorithms can depend strongly on details of the detector geometry, the algorithms currently in use by experiments share many common features. At the same time, the intense environment of the High-Luminosity LHC accelerator and other future experiments is expected to put even greater computational stress on track reconstruction software, motivating the development of more performant algorithms. We present here A Common Tracking Software (ACTS) toolkit, which draws on the experience with track reconstruction algorithms in the ATLAS experiment and presents them in an experiment-independent and framework-independent toolkit. It provides a set of high-level track reconstruction tools which are agnostic to the details of the detection technologies and magnetic field configuration and tested for strict thread-safety to support multi-threaded event processing. We discuss the conceptual design and technical implementation of ACTS, selected applications and performance of ACTS, and the lessons learned. △ Less

Submitted 25 June, 2021; originally announced June 2021.

Comments: 27 pages

Journal ref: Comput Softw Big Sci 6, 8 (2022)

Technical design of the phase I Mu3e experiment

Authors: K. Arndt, H. Augustin, P. Baesso, N. Berger, F. Berg, C. Betancourt, D. Bortoletto, A. Bravar, K. Briggl, D. vom Bruch, A. Buonaura, F. Cadoux, C. Chavez Barajas, H. Chen, K. Clark, P. Cooke, S. Corrodi, A. Damyanova, Y. Demets, S. Dittmeier, P. Eckert, F. Ehrler, D. Fahrni, S. Gagneur, L. Gerritzen , et al. (80 additional authors not shown)

Abstract: The Mu3e experiment aims to find or exclude the lepton flavour violating decay $μみゅー\rightarrow eee$ at branching fractions above $10^{-16}$. A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of $2\cdot 10^{-15}$. We present an overview of all aspects of the technical design and expected performance of the p… ▽ More The Mu3e experiment aims to find or exclude the lepton flavour violating decay $μみゅー\rightarrow eee$ at branching fractions above $10^{-16}$. A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of $2\cdot 10^{-15}$. We present an overview of all aspects of the technical design and expected performance of the phase~I Mu3e detector. The high rate of up to $10^{8}$ muon decays per second and the low momenta of the decay electrons and positrons pose a unique set of challenges, which we tackle using an ultra thin tracking detector based on high-voltage monolithic active pixel sensors combined with scintillating fibres and tiles for precise timing measurements. △ Less

Submitted 26 August, 2021; v1 submitted 24 September, 2020; originally announced September 2020.

Comments: 117 pages. Minor corrections to the author list. Replaced with published version. Editor: Frank Meier Aeschbacher

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Vol. 1014 (2021) 165679

MuPix and ATLASPix -- Architectures and Results

Authors: A. Schöning, J. Anders, H. Augustin, M. Benoit, N. Berger, S. Dittmeier, F. Ehrler, A. Fehr, T. Golling, S. Gonzalez Sevilla, J. Hammerich, A. Herkert, L. Huth, G. Iacobucci, D. Immig, M. Kiehn, J. Kröger, F. Meier, A. Meneses Gonzalez, A. Miucci, L. O. S. Noehte, I. Peric, M. Prathapan, T. Rudzki, R. Schimassek , et al. (7 additional authors not shown)

Abstract: High Voltage Monolithic Active Pixel Sensors (HV-MAPS) are based on a commercial High Voltage CMOS process and collect charge by drift inside a reversely biased diode. HV-MAPS represent a promising technology for future pixel tracking detectors. Two recent developments are presented. The MuPix has a continuous readout and is being developed for the Mu3e experiment whereas the ATLASPix is being dev… ▽ More High Voltage Monolithic Active Pixel Sensors (HV-MAPS) are based on a commercial High Voltage CMOS process and collect charge by drift inside a reversely biased diode. HV-MAPS represent a promising technology for future pixel tracking detectors. Two recent developments are presented. The MuPix has a continuous readout and is being developed for the Mu3e experiment whereas the ATLASPix is being developed for LHC applications with a triggered readout. Both variants have a fully monolithic design including state machines, clock circuitries and serial drivers. Several prototypes and design variants were characterised in the lab and in testbeam campaigns to measure efficiencies, noise, time resolution and radiation tolerance. Results from recent MuPix and ATLASPix prototypes are presented and prospects for future improvements are discussed. △ Less

Submitted 17 February, 2020; originally announced February 2020.

Comments: 10 pages, proceedings, The 28th International Workshop on Vertex Detectors (VERTEX 2019), 13 - 18 Oct 2019, Lopud Island, Croatia

Electrical Characterization of 180 nm ATLASPix2 HV-CMOS Monolithic Prototypes for the High-Luminosity LHC

Authors: D M S Sultan, S. Gonzalez-Sevilla, D. Ferrere, G. Iacobucci, E. Zaffaroni, W. Wong, M. Kiehn, and M. Benoit

Abstract: We report on the experimental study made on a successive prototype of High-Voltage CMOS (HV-CMOS) ATLASPix2 sensor for the tracking detector application, developed with 180 nm feature size. These sensors are to qualify mainly the peripheral data processing blocks (e.g. Command Decoder, Trigger Buffer, etc.). It is a smaller version of 24 X 36 pixelated sensor in comparison to the earlier generatio… ▽ More We report on the experimental study made on a successive prototype of High-Voltage CMOS (HV-CMOS) ATLASPix2 sensor for the tracking detector application, developed with 180 nm feature size. These sensors are to qualify mainly the peripheral data processing blocks (e.g. Command Decoder, Trigger Buffer, etc.). It is a smaller version of 24 X 36 pixelated sensor in comparison to the earlier generation of ATLASPix1 fabricated in both ams AG, Austria, and TSI Semiconductors, USA. While ams produced ATLASPix2 showed breakdown voltage 50 V in nonirradiated condition as it was seen on its predecessors ATLASpix1, TSI produced prototypes reported breakdown voltage greater than 100 V. The chosen wafer of MCz 20 Ohm.cm P-type substrate resistivity can deplete a few tenths of um, where the process-driven surface damage can have a greater impact on device operating conditions before and after irradiation. In an aim to understand device intrinsic performance at the irradiated case, a dedicated neutron irradiation campaign has been made at JSI for different fluences. Characterizations have been performed at different temperatures after irradiation to analyze the leakage current and breakdown voltage before and after irradiation. TSI prototypes showed a breakdown voltage decrease 90 V due to impact ionization and enhanced effective doping concentration. Results demonstrated for the neutron-irradiated devices up to the fluence of 2 X 10^15 neq/cm2 can still safely be operated at a voltage high enough to allow for high efficiency. Accelerated Annealing steps also made on selective irradiated ATLASPix2 samples, equivalent to more than two years of room-temperature annealing (at 20 degC), and they showed the reassuring expected breakdown voltage increase and damage constant rate alpha^* (geometry dependent) decrease, driven by the beneficial annealing. △ Less

Submitted 22 April, 2020; v1 submitted 25 October, 2019; originally announced October 2019.

Comments: Prepared for JINST

EUDAQ $-$ A Data Acquisition Software Framework for Common Beam Telescopes

Authors: P. Ahlburg, S. Arfaoui, J. -H. Arling, H. Augustin, D. Barney, M. Benoit, T. Bisanz, E. Corrin, D. Cussans, D. Dannheim, J. Dreyling-Eschweiler, T. Eichhorn, A. Fiergolski, I. -M. Gregor, J. Grosse-Knetter, D. Haas, L. Huth, A. Irles, H. Jansen, J. Janssen, M. Keil, J. S. Keller, M. Kiehn, H. J. Kim, J. Kroll , et al. (32 additional authors not shown)

Abstract: EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed… ▽ More EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed with reliability and ease-of-use in mind. It enables flexible integration of different independent devices under test via their specific data acquisition systems into a top-level framework. EUDAQ controls all components globally, handles the data flow centrally and synchronises and records the data streams. Over the past decade, EUDAQ has been deployed as part of a wide range of successful test beam campaigns and detector development applications. △ Less

Submitted 18 November, 2019; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: 32 pages, 11 figures

The Tracking Machine Learning challenge : Accuracy phase

Authors: Sabrina Amrouche, Laurent Basara, Paolo Calafiura, Victor Estrade, Steven Farrell, Diogo R. Ferreira, Liam Finnie, Nicole Finnie, Cécile Germain, Vladimir Vava Gligorov, Tobias Golling, Sergey Gorbunov, Heather Gray, Isabelle Guyon, Mikhail Hushchyn, Vincenzo Innocente, Moritz Kiehn, Edward Moyse, Jean-Francois Puget, Yuval Reina, David Rousseau, Andreas Salzburger, Andrey Ustyuzhanin, Jean-Roch Vlimant, Johan Sokrates Wind , et al. (2 additional authors not shown)

Abstract: This paper reports the results of an experiment in high energy physics: using the power of the "crowd" to solve difficult experimental problems linked to tracking accurately the trajectory of particles in the Large Hadron Collider (LHC). This experiment took the form of a machine learning challenge organized in 2018: the Tracking Machine Learning Challenge (TrackML). Its results were discussed at… ▽ More This paper reports the results of an experiment in high energy physics: using the power of the "crowd" to solve difficult experimental problems linked to tracking accurately the trajectory of particles in the Large Hadron Collider (LHC). This experiment took the form of a machine learning challenge organized in 2018: the Tracking Machine Learning Challenge (TrackML). Its results were discussed at the competition session at the Neural Information Processing Systems conference (NeurIPS 2018). Given 100.000 points, the participants had to connect them into about 10.000 arcs of circles, following the trajectory of particles issued from very high energy proton collisions. The competition was difficult with a dozen front-runners well ahead of a pack. The single competition score is shown to be accurate and effective in selecting the best algorithms from the domain point of view. The competition has exposed a diversity of approaches, with various roles for Machine Learning, a number of which are discussed in the document △ Less

Submitted 3 May, 2021; v1 submitted 14 April, 2019; originally announced April 2019.

Comments: 36 pages, 22 figures

Journal ref: In: Escalera S., Herbrich R. (eds) The NeurIPS 2018 Competition. The Springer Series on Challenges in Machine Learning. Springer, Cham

Electrical characterization of AMS aH18 HV-CMOS after neutrons and protons irradiation

Authors: D M S Sultan, Sergio Gonzalez Sevilla, Didier Ferrere, Giuseppe Iacobucci, Ettore Zaffaroni, Winnie Wong, Mateus Vicente Barrero Pinto, Moritz Kiehn, Mridula Prathapan, Felix Ehrler, Ivan Peric, Antonio Miucci, John Kenneth Anders, Armin Fehr, Michele Weber, Andre Schoening, Adrian Herkert, Heiko Augustin, Mathieu Benoit

Abstract: In view of the tracking detector application to the ATLAS High Luminosity LHC (HL-LHC) upgrade, we have developed a new generation of High Voltage CMOS (HV-CMOS) monolithic pixel-sensor prototypes featuring the AMS aH18 (180 nm) commercial CMOS technology. By fully integrating both analog and digital readout-circuitry on the same particle-detecting substrate, current challenges of hybrid sensor te… ▽ More In view of the tracking detector application to the ATLAS High Luminosity LHC (HL-LHC) upgrade, we have developed a new generation of High Voltage CMOS (HV-CMOS) monolithic pixel-sensor prototypes featuring the AMS aH18 (180 nm) commercial CMOS technology. By fully integrating both analog and digital readout-circuitry on the same particle-detecting substrate, current challenges of hybrid sensor technologies, i.e., larger readout input-capacitance, lower production-yield, and higher production and integration cost, can be downscaled. The large electrode design using high-resistivity substrates actively helps to mitigate the charge-trapping effects, making these chips radiation hard. The surface and bulk damage induced in high irradiation environment change the effective doping concentration of the device, which modulates high electric fields as the reverse-bias voltage increases. This effect can cause high leakage current and premature electrical breakdown, driven by impact ionization. In order to assess the characteristics of heavily irradiated samples, we have carried out dedicated campaigns on ATLASPix1 chips that included irradiations of neutrons and protons, made at different facilities. Here, we report on the electrical characterization of the irradiated samples at different ambient conditions, also in comparison to their pre-irradiation properties. Results demonstrate that hadron irradiated devices can be safely operated at a voltage high enough to allow for high efficiency, up to the fluence of 2E15 neq/cm2, beyond the radiation levels (TID and NIEL) expected in the outermost pixel layers of the new ATLAS tracker for HL-LHC. △ Less

Submitted 28 May, 2020; v1 submitted 15 February, 2019; originally announced February 2019.

Comments: Proof Version to JINST

Charge collection characterisation with the Transient Current Technique of the ams H35DEMO CMOS detector after proton irradiation

Authors: John Anders, Mathieu Benoit, Saverio Braccini, Raimon Casanova, Hucheng Chen, Kai Chen, Francesco Armando di Bello, Armin Fehr, Didier Ferrere, Dean Forshaw, Tobias Golling, Sergio Gonzalez-Sevilla, Giuseppe Iacobucci, Moritz Kiehn, Francesco Lanni, Hongbin Liu, Lingxin Meng, Claudia Merlassino, Antonio Miucci, Marzio Nessi, Ivan Perić, Marco Rimoldi, D M S Sultan, Mateus Vincente Barreto Pinto, Eva Vilella , et al. (4 additional authors not shown)

Abstract: This paper reports on the characterisation with Transient Current Technique measurements of the charge collection and depletion depth of a radiation-hard high-voltage CMOS pixel sensor produced at ams AG. Several substrate resistivities were tested before and after proton irradiation with two different sources: the 24 GeV Proton Synchrotron at CERN and the 16.7 MeV Cyclotron at Bern Inselspital. This paper reports on the characterisation with Transient Current Technique measurements of the charge collection and depletion depth of a radiation-hard high-voltage CMOS pixel sensor produced at ams AG. Several substrate resistivities were tested before and after proton irradiation with two different sources: the 24 GeV Proton Synchrotron at CERN and the 16.7 MeV Cyclotron at Bern Inselspital. △ Less

Submitted 25 July, 2018; originally announced July 2018.

Comments: 14 pages, 11 figures

Performance of CMOS pixel sensor prototypes in ams H35 and aH18 technology for the ATLAS ITk upgrade

Authors: Moritz Kiehn, Francesco Armando Di Bello, Mathieu Benoit, Raimon Casanova Mohr, Hucheng Chen, Kai Chen, Sultan D. M. S., Felix Ehrler, Didier Ferrere, Dylan Frizell, Sergio Gonzalez Sevilla, Giuseppe Iacobucci, Francesco Lanni, Hongbin Liu, Claudia Merlassino, Jessica Metcalfe, Antonio Miucci, Ivan Peric, Mridula Prathapan, Rudolf Schimassek, Mateus Vicente Barreto, Thomas Weston, Eva Vilella Figueras, Alena Weber, Michele Weber , et al. (5 additional authors not shown)

Abstract: Pixel sensors based on commercial high-voltage CMOS processes are an exciting technology that is considered as an option for the outer layer of the ATLAS inner tracker upgrade at the High Luminosity LHC. Here, charged particles are detected using deep n-wells as sensor diodes with the depleted region extending into the silicon bulk. Both analog and digital readout electronics can be added to achie… ▽ More Pixel sensors based on commercial high-voltage CMOS processes are an exciting technology that is considered as an option for the outer layer of the ATLAS inner tracker upgrade at the High Luminosity LHC. Here, charged particles are detected using deep n-wells as sensor diodes with the depleted region extending into the silicon bulk. Both analog and digital readout electronics can be added to achieve different levels of integration up to a fully monolithic sensor. Small scale prototypes using the ams CMOS technology have previously demonstrated that it can achieve the required radiation tolerance of $10^{15}~\text{n}_\text{eq}/\text{cm}^2$ and detection efficiencies above $99.5~\%$. Recently, large area prototypes, comparable in size to a full sensor, have been produced that include most features required towards a final design: the H35demo prototype produced in ams H35 technology that supports both external and integrated readout and the monolithic ATLASPix1 pre-production design produced in ams aH18 technology. Both chips are based on large fill-factor pixel designs, but differ in readout structure. Performance results for H35DEMO with capacitively-coupled external readout and first results for the monolithic ATLASPix1 are shown. △ Less

Submitted 8 June, 2020; v1 submitted 16 July, 2018; originally announced July 2018.

Comments: 6 pages, 7 figures, 11th International "Hiroshima" Symposium on the Development and Application of Semiconductor Tracking Detectors (HSTD11) in conjunction with 2nd Workshop on SOI Pixel Detectors (SOIPIX2017) at OIST, Okinawa, Japan

Efficiency and timing performance of the MuPix7 high-voltage monolithic active pixel sensor

Authors: Heiko Augustin, Niklaus Berger, Sebastian Dittmeier, Carsten Grzesik, Jan Hammerich, Ulrich Hartenstein, Qinhua Huang, Lennart Huth, David Maximilian Immig, Moritz Kiehn, Alexandr Kozlinskiy, Frank Meier Aeschbacher, Annie Meneses González, Ivan Perić, Ann-Kathrin Perrevoort, André Schöning, Shruti Shrestha, Dorothea vom Bruch, Frederik Wauters, Dirk Wiedner

Abstract: The MuPix7 is a prototype high voltage monolithic active pixel sensor with 103 times 80 um2 pixels thinned to 64 um and incorporating the complete read-out circuitry including a 1.25 Gbit/s differential data link. Using data taken at the DESY electron test beam, we demonstrate an efficiency of 99.3% and a time resolution of 14 ns. The efficiency and time resolution are studied with sub-pixel resol… ▽ More The MuPix7 is a prototype high voltage monolithic active pixel sensor with 103 times 80 um2 pixels thinned to 64 um and incorporating the complete read-out circuitry including a 1.25 Gbit/s differential data link. Using data taken at the DESY electron test beam, we demonstrate an efficiency of 99.3% and a time resolution of 14 ns. The efficiency and time resolution are studied with sub-pixel resolution and reproduced in simulations. △ Less

Submitted 30 June, 2018; v1 submitted 5 March, 2018; originally announced March 2018.

Comments: 7 pages, 13 figures, submitted to Nucl.Instr.Meth.A

Journal ref: Nucl. Instr. Meth. A 902 158 (2018)

Test beam measurement of ams H35 HV-CMOS capacitively coupled pixel sensor prototypes with high-resistivity substrate

Authors: M. Benoit, S. Braccini, R. Casanova, E. Cavallaro, H. Chen, K. Chen, F. A. Di Bello, D. Ferrere, D. Frizzell, T. Golling, S. Gonzalez-Sevilla, S. Grinstein, G. Iacobucci, M. Kiehn, F. Lanni, H. Liu, J. Metcalfe, L. Meng, C. Merlassino, A. Miucci, D. Muenstermann, M. Nessi, H. Okawa, I. Perić, M. Rimoldi , et al. (12 additional authors not shown)

Abstract: In the context of the studies of the ATLAS High Luminosity LHC programme, radiation tolerant pixel detectors in CMOS technologies are investigated. To evaluate the effects of substrate resistivity on CMOS sensor performance, the H35DEMO demonstrator, containing different diode and amplifier designs, was produced in ams H35 HV-CMOS technology using four different substrate resistivities spanning fr… ▽ More In the context of the studies of the ATLAS High Luminosity LHC programme, radiation tolerant pixel detectors in CMOS technologies are investigated. To evaluate the effects of substrate resistivity on CMOS sensor performance, the H35DEMO demonstrator, containing different diode and amplifier designs, was produced in ams H35 HV-CMOS technology using four different substrate resistivities spanning from $\mathrm{80}$ to $\mathrm{1000~Ωおめが\cdot cm}$. A glueing process using a high-precision flip-chip machine was developed in order to capacitively couple the sensors to FE-I4 Readout ASIC using a thin layer of epoxy glue with good uniformity over a large surface. The resulting assemblies were measured in beam test at the Fermilab Test Beam Facilities with 120 GeV protons and CERN SPS H8 beamline using 80 GeV pions. The in-time efficiency and tracking properties measured for the different sensor types are shown to be compatible with the ATLAS ITk requirements for its pixel sensors. △ Less

Submitted 3 December, 2018; v1 submitted 22 December, 2017; originally announced December 2017.

The MuPix Telescope: A Thin, high Rate Tracking Telescope

Authors: H. Augustin, N. Berger, S. Dittmeier, C. Grzesik, J. Hammerich, Q. Huang, L. Huth, M. Kiehn, A. Kozlinskiy, F. Meier, I. Perić, A. -K. Perrevoort, A. Schöning, D. vom Bruch, F. Wauters, D. Wiedner

Abstract: The MuPix Telescope is a particle tracking telescope, optimized for tracking low momentum particles and high rates. It is based on the novel High-Voltage Monolithic Active Pixel Sensors (HV-MAPS), designed for the Mu3e tracking detector. The telescope represents a first application of the HV-MAPS technology and also serves as test bed of the Mu3e readout chain. The telescope consists of up to eigh… ▽ More The MuPix Telescope is a particle tracking telescope, optimized for tracking low momentum particles and high rates. It is based on the novel High-Voltage Monolithic Active Pixel Sensors (HV-MAPS), designed for the Mu3e tracking detector. The telescope represents a first application of the HV-MAPS technology and also serves as test bed of the Mu3e readout chain. The telescope consists of up to eight layers of the newest prototypes, the MuPix7 sensors, which send data self-triggered via fast serial links to FPGAs, where the data is time-ordered and sent to the PC. A particle hit rate of 1 MHz per layer could be processed. Online tracking is performed with a subset of the incoming data. The general concept of the telescope, chip architecture, readout concept and online reconstruction are described. The performance of the sensor and of the telescope during test beam measurements are presented. △ Less

Submitted 9 November, 2016; originally announced November 2016.

Comments: Proceedings TWEPP 2016, 8 pages, 7 figures

Testbeam results of irradiated ams H18 HV-CMOS pixel sensor prototypes

Authors: M. Benoit, S. Braccini, G. Casse, H. Chen, K. Chen, F. A. Di Bello, D. Ferrere, T. Golling, S. Gonzalez-Sevilla, G. Iacobucci, M. Kiehn, F. Lanni, H. Liu, L. Meng, C. Merlassino, A. Miucci, D. Muenstermann, M. Nessi, H. Okawa, I. Peric, M. Rimoldi, B. Ristic, M. Vicente Barrero Pinto, J. Vossebeld, M. Weber , et al. (4 additional authors not shown)

Abstract: HV-CMOS pixel sensors are a promising option for the tracker upgrade of the ATLAS experiment at the LHC, as well as for other future tracking applications in which large areas are to be instrumented with radiation-tolerant silicon pixel sensors. We present results of testbeam characterisations of the $4^{\mathrm{th}}$ generation of Capacitively Coupled Pixel Detectors (CCPDv4) produced with the am… ▽ More HV-CMOS pixel sensors are a promising option for the tracker upgrade of the ATLAS experiment at the LHC, as well as for other future tracking applications in which large areas are to be instrumented with radiation-tolerant silicon pixel sensors. We present results of testbeam characterisations of the $4^{\mathrm{th}}$ generation of Capacitively Coupled Pixel Detectors (CCPDv4) produced with the ams H18 HV-CMOS process that have been irradiated with different particles (reactor neutrons and 18 MeV protons) to fluences between $1\cdot 10^{14}$ and $5\cdot 10^{15}$ 1-MeV-n$_\textrm{eq}$/cm$^2$. The sensors were glued to ATLAS FE-I4 pixel readout chips and measured at the CERN SPS H8 beamline using the FE-I4 beam telescope. Results for all fluences are very encouraging with all hit efficiencies being better than 97% for bias voltages of $85\,$V. The sample irradiated to a fluence of $1\cdot 10^{15}$ n$_\textrm{eq}$/cm$^2$ - a relevant value for a large volume of the upgraded tracker - exhibited 99.7% average hit efficiency. The results give strong evidence for the radiation tolerance of HV-CMOS sensors and their suitability as sensors for the experimental HL-LHC upgrades and future large-area silicon-based tracking detectors in high-radiation environments. △ Less

Submitted 28 November, 2017; v1 submitted 8 November, 2016; originally announced November 2016.

Comments: 14 pages, 11 figures; revised version

Journal ref: JINST 13 (2018) P02011

A New Three-Dimensional Track Fit with Multiple Scattering

Authors: Niklaus Berger, Moritz Kiehn, Alexandr Kozlinskiy, Andre Schöning

Abstract: Modern semiconductor detectors allow for charged particle tracking with ever increasing position resolution. Due to the reduction of the spatial hit uncertainties, multiple Coulomb scattering in the detector layers becomes the dominant source for tracking uncertainties. In this case long distance effects can be ignored for the momentum measurement, and the track fit can consequently be formulated… ▽ More Modern semiconductor detectors allow for charged particle tracking with ever increasing position resolution. Due to the reduction of the spatial hit uncertainties, multiple Coulomb scattering in the detector layers becomes the dominant source for tracking uncertainties. In this case long distance effects can be ignored for the momentum measurement, and the track fit can consequently be formulated as a sum of independent fits to hit triplets. In this paper we present an analytical solution for a three-dimensional triplet(s) fit in a homogeneous magnetic field based on a multiple scattering model. Track fitting of hit triplets is performed using a linearization ansatz. The momentum resolution is discussed for a typical spectrometer setup. Furthermore the track fit is compared with other track fits for two different pixel detector geometries, namely the Mu3e experiment at PSI and a typical high-energy collider experiment. For a large momentum range the triplets fit provides a significantly better performance than a single helix fit. The triplets fit is fast and can easily be parallelized, which makes it ideal for the implementation on parallel computing architectures. △ Less

Submitted 8 November, 2016; v1 submitted 15 June, 2016; originally announced June 2016.

Comments: 8 pages, 5 figures, submitted to Nuclear Instruments and Methods A

Journal ref: Nucl. Instrum. Meth. A 844C, 135 (2017)

The MuPix System-on-Chip for the Mu3e Experiment

Authors: Heiko Augustin, Niklaus Berger, Sebastian Dittmeier, Carsten Grzesik, Jan Hammerich, Qinhua Huang, Lennart Huth, Moritz Kiehn, Alexandr Kozlinskiy, Frank Meier Aeschbacher, Ivan Perić, Ann-Kathrin Perrevoort, André Schöning, Shruti Shrestha, Dorothea vom Bruch, Frederik Wauters, Dirk Wiedner

Abstract: Mu3e is a novel experiment searching for charged lepton flavor violation in the rare decay $μみゅー^+ \rightarrow e^+e^-e^+$. Decay vertex position, decay time and particle momenta have to be precisely measured in order to reject both accidental and physics background. A silicon pixel tracker based on $50\,μみゅー$m thin high voltage monolithic active pixel sensors (HV-MAPS) in a 1 T solenoidal magnetic field… ▽ More Mu3e is a novel experiment searching for charged lepton flavor violation in the rare decay $μみゅー^+ \rightarrow e^+e^-e^+$. Decay vertex position, decay time and particle momenta have to be precisely measured in order to reject both accidental and physics background. A silicon pixel tracker based on $50\,μみゅー$m thin high voltage monolithic active pixel sensors (HV-MAPS) in a 1 T solenoidal magnetic field provides precise vertex and momentum information. The MuPix chip combines pixel sensor cells with integrated analog electronics and a periphery with a complete digital readout. The MuPix7 is the first HV-MAPS prototype implementing all functionalities of the final sensor including a readout state machine and high speed serialization with 1.25 Gbit/s data output, allowing for a streaming readout in parallel to the data taking. The observed efficiency of the MuPix7 chip including the full readout system is $\geq99\%$ in a high rate test beam. △ Less

Submitted 14 October, 2016; v1 submitted 29 March, 2016; originally announced March 2016.

Comments: Replaced with final version accepted by the publisher

Multiple Coulomb Scattering in Thin Silicon

Authors: Niklaus Berger, Armen Buniatyan, Patrick Eckert, Fabian Förster, Roman Gredig, Oxana Kovalenko, Moritz Kiehn, Raphael Philipp, André Schöning, Dirk Wiedner

Abstract: We present a measurement of multiple Coulomb scattering of 1 to 6 GeV/c electrons in thin (50-140 um) silicon targets. The data were obtained with the EUDET telescope Aconite at DESY and are compared to parametrisations as used in the Geant4 software package. We find good agreement between data and simulation in the scattering distribution width but large deviations in the shape of the distributio… ▽ More We present a measurement of multiple Coulomb scattering of 1 to 6 GeV/c electrons in thin (50-140 um) silicon targets. The data were obtained with the EUDET telescope Aconite at DESY and are compared to parametrisations as used in the Geant4 software package. We find good agreement between data and simulation in the scattering distribution width but large deviations in the shape of the distribution. In order to achieve a better description of the shape, a new scattering model based on a Student's t distribution is developed and compared to the data. △ Less

Submitted 12 May, 2014; originally announced May 2014.

Comments: 13 pages, 9 figures

Journal ref: JINST 9 P07007 (2014)

A Tracker for the Mu3e Experiment based on High-Voltage Monolithic Active Pixel Sensors

Authors: Niklaus Berger, Heiko Augustin, Sebastian Bachmann, Moritz Kiehn, Ivan Perić, Ann-Kathrin Perrevoort, Raphael Philipp, André Schöning, Kevin Stumpf, Dirk Wiedner, Bernd Windelband, Marco Zimmermann

Abstract: The Mu3e experiment searches for the lepton flavour violating decay mu+ -> e+e-e+, aiming for a branching fraction sensitivity of 10^-16. This requires an excellent momentum resolution for low energy electrons, high rate capability and a large acceptance. In order to minimize multiple scattering, the amount of material has to be as small as possible. These challenges can be met with a tracker buil… ▽ More The Mu3e experiment searches for the lepton flavour violating decay mu+ -> e+e-e+, aiming for a branching fraction sensitivity of 10^-16. This requires an excellent momentum resolution for low energy electrons, high rate capability and a large acceptance. In order to minimize multiple scattering, the amount of material has to be as small as possible. These challenges can be met with a tracker built from high-voltage monolithic active pixel sensors (HV-MAPS), which can be thinned to 50 um and which incorporate the complete read-out electronics on the sensor chip. To further minimise material, the sensors are supported by a mechanical structure built from 25 um thick Kapton foil and cooled with gaseous helium. △ Less

Submitted 30 September, 2013; originally announced September 2013.

Comments: 4 pages, 10 figures

Journal ref: Nucl. Instr. Meth. A 732 (2013) 61-65

Research Proposal for an Experiment to Search for the Decay μみゅー -> eee

Authors: A. Blondel, A. Bravar, M. Pohl, S. Bachmann, N. Berger, M. Kiehn, A. Schöning, D. Wiedner, B. Windelband, P. Eckert, H. -C. Schultz-Coulon, W. Shen, P. Fischer, I. Perić, M. Hildebrandt, P. -R. Kettle, A. Papa, S. Ritt, A. Stoykov, G. Dissertori, C. Grab, R. Wallny, R. Gredig, P. Robmann, U. Straumann

Abstract: We propose an experiment (Mu3e) to search for the lepton flavour violating decay mu+ -> e+e-e+. We aim for an ultimate sensitivity of one in 10^16 mu-decays, four orders of magnitude better than previous searches. This sensitivity is made possible by exploiting modern silicon pixel detectors providing high spatial resolution and hodoscopes using scintillating fibres and tiles providing precise tim… ▽ More We propose an experiment (Mu3e) to search for the lepton flavour violating decay mu+ -> e+e-e+. We aim for an ultimate sensitivity of one in 10^16 mu-decays, four orders of magnitude better than previous searches. This sensitivity is made possible by exploiting modern silicon pixel detectors providing high spatial resolution and hodoscopes using scintillating fibres and tiles providing precise timing information at high particle rates. △ Less

Submitted 25 January, 2013; originally announced January 2013.

Comments: Research proposal submitted to the Paul Scherrer Institute Research Committee for Particle Physics at the Ring Cyclotron, 104 pages

Instability patterns, wakes and topological limnit sets

Authors: R. M. Kiehn

Abstract: Many hydrodynamic instability patterns can be put into correspondence with a subset of characteristic surfaces of tangential discontinuities. These topological limits sets to systems of hyperbolic PDE's are locally unstable, but a certain subset associated with minimal surfaces are globally stabilized, persistent and non-dissipative. Sections of these surfaces are the spiral scrolls so often obs… ▽ More Many hydrodynamic instability patterns can be put into correspondence with a subset of characteristic surfaces of tangential discontinuities. These topological limits sets to systems of hyperbolic PDE's are locally unstable, but a certain subset associated with minimal surfaces are globally stabilized, persistent and non-dissipative. Sections of these surfaces are the spiral scrolls so often observed in hydrodynamic wakes. This method of wake production does not depend explicitly upon viscosity. △ Less

Submitted 3 February, 2001; originally announced February 2001.

Comments: 16 pages pdf

Topology and Turbulence

Authors: R. M. Kiehn

Abstract: Over a given regular domain of independent variables {x,y,z,t}, every covariant vector field of flow can be constructed in terms a differential 1-form of Action. The associated Cartan topology permits the definition of four basic topological equivalence classes of flows based on the Pfaff dimension of the 1-form of Action. Potential flows or streamline processes are generated by an Action 1-form… ▽ More Over a given regular domain of independent variables {x,y,z,t}, every covariant vector field of flow can be constructed in terms a differential 1-form of Action. The associated Cartan topology permits the definition of four basic topological equivalence classes of flows based on the Pfaff dimension of the 1-form of Action. Potential flows or streamline processes are generated by an Action 1-form of Pfaff dimension 1 and 2, respectively. Chaotic flows must be associated with domains of Pfaff dimension 3 or more. Turbulent flows are associated with domains of Pfaff dimension 4. It will be demonstrated that the Navier-Stokes equations are related to Action 1-forms of Pfaff dimension 4. The Cartan Topology is a disconnected topology if the Pfaff dimension is greater than 2. This fact implies that the creation of turbulence (a state of Pfaff dimension 4 and a disconnected Cartan topology) from a streamline flow (a state of Pfaff dimension 2 and a connected topology) can take place only by discontinuous processes which induce shocks and tangential discontinuities. On the otherhand, the decay of turbulence can be described by continuous, but irreversible, processes. Numerical procedures that force continuity of slope and value cannot in principle describe the creation of turbulence, but such techniques of forced continuity can be used to describe the decay of turbulence. △ Less

Submitted 2 February, 2001; originally announced February 2001.

Comments: 27 pages tex

Some closed form solutions to the Navier Stokes equations

Authors: R. M. Kiehn

Abstract: An algorithm for generating a class of closed form solutions to the Navier-Stokes equations is suggested, with examples. Of particular interest are those exact solutions that exhibit intermittency, tertiary Hopf bifurcations, flow reversal, and hysteresis. An algorithm for generating a class of closed form solutions to the Navier-Stokes equations is suggested, with examples. Of particular interest are those exact solutions that exhibit intermittency, tertiary Hopf bifurcations, flow reversal, and hysteresis. △ Less

Submitted 1 February, 2001; originally announced February 2001.

Comments: 12 pages tex

Topological-Torsion and Topological-Spin as coherent structures in plasmas

Authors: R. M. Kiehn

Abstract: The PDE's of classical electromagnetism can be generated from two exterior differential systems that distinguish topologically the field intensities and potentials, F-dA= 0, from the field excitations and the charge current densities, J-dG = 0. The existence of potentials, A, leads to the independent 3-forms of T-Torsion = A^F and T-Spin = A^G. The exterior derivatives (divergences) of these 3-f… ▽ More The PDE's of classical electromagnetism can be generated from two exterior differential systems that distinguish topologically the field intensities and potentials, F-dA= 0, from the field excitations and the charge current densities, J-dG = 0. The existence of potentials, A, leads to the independent 3-forms of T-Torsion = A^F and T-Spin = A^G. The exterior derivatives (divergences) of these 3-forms produce anomalies that define the two classic Poincare invariants. The closed integrals of these forms, when deformation invariants of frozen-in fields, define topological coherent structures in the plasma. Solutions when T-Torsion (T-Spin) is zero define transverse magnetic (electric) modes on topological grounds. When the divergence of T-Torsion is not zero there exists a classical mechanism for charge acceleration along the magnetic field lines producing symplectic plasma currents; large temperature gradients along the B field lines can act as a source of stellar plasma jets in neutron stars. In such circumstances, the Torsion vector is uniquely defined by conformal invariance of the Action potentials. Plasma currents in the direction of the Torsion vector leave both A^F and A^G conformally invariant, hence these fields are frozen-in even though the processes are thermodynamically irreversible. The decaying coherent and deformable topological structures associated with such frozen-in fields are persistent and observable artifacts, similar to wakes, that can appear in any plasma domain, such as that which surrounds stars. △ Less

Submitted 1 February, 2001; originally announced February 2001.

Comments: 46 pages tex

Chirality and helicity in terms of topological spin and topological torsion

Authors: R. M. Kiehn

Abstract: In this article the concept of enantiomorphism is developed in terms of topological, rather than geometrical, concepts. Chirality is to be associated with enantiomorphic pairs which induce Optical Activity, while Helicity is to be associated enantiomorphic pairs which induce a Faraday effect. Experimentally, the existence of enantiomorphic pairs is associated with the lack of a center of symmetr… ▽ More In this article the concept of enantiomorphism is developed in terms of topological, rather than geometrical, concepts. Chirality is to be associated with enantiomorphic pairs which induce Optical Activity, while Helicity is to be associated enantiomorphic pairs which induce a Faraday effect. Experimentally, the existence of enantiomorphic pairs is associated with the lack of a center of symmetry, which is also serves as a necessary condition for Optical Activity. However, Faraday effects may or may not require a lack of a center of symmetry. The two species of enantiomorphic pairs are distinct, as the rotation of the plane of polarization by Optical Activity is a reciprocal phenomenon, while rotation of the plane of polarization by the Faraday effect is a non-reciprocal phenomenon. From a topological viewpoint, Maxwell's electrodynamics indicates that the concept of Chirality is to be associated with a third rank tensor density of Topological Spin induced by the interaction of the 4 vector potentials {A,phi} and the field excitations {D,H}. The distinct concept of Helicity is to be associated with the third rank tensor field of Topological Torsion induced by the interaction of the 4 vector potentials and field intensities {E,B}. △ Less

Submitted 29 January, 2001; originally announced January 2001.

Comments: 16 pages TEX

Electromagnetic Waves in the Vacuum with Torsion and Spin

Authors: R. M. Kiehn

Abstract: Exact radiative wave solutions to the classical homogeneous Maxwell equations in the vacuum have been found that are not transverse, exhibit both torsion and spin, and for which the second Poincare invariant, E.B, is not zero. Two four component rank 3 tensors of spin current and torsion are constructed on topological grounds. The divergence of each pseudo vector generates the Poincare invariant… ▽ More Exact radiative wave solutions to the classical homogeneous Maxwell equations in the vacuum have been found that are not transverse, exhibit both torsion and spin, and for which the second Poincare invariant, E.B, is not zero. Two four component rank 3 tensors of spin current and torsion are constructed on topological grounds. The divergence of each pseudo vector generates the Poincare invariants of the electromagnetic system. △ Less

Submitted 17 February, 1998; originally announced February 1998.

Comments: SW-20 latex2e 6 pages

Report number: rmkuh298