Si1-x-yGeySnx alloy formation by Sn ion implantation and flash lamp annealing
Authors:
Oliver Steuer,
Michail Michailow,
René Hübner,
Krzysztof Pyszniak,
Marcin Turek,
Ulrich Kentsch,
Fabian Ganss,
Muhammad Moazzam Khan,
Lars Rebohle,
Shengqiang Zhou,
Joachim Knoch,
Manfred Helm,
Gianaurelio Cuniberti,
Yordan M. Georgiev,
Slawomir Prucnal
Abstract:
For many years, Si1-yGey alloys have been applied in the semiconductor industry due to the ability to adjust the performance of Si-based nanoelectronic devices. Following this alloying approach of group-IV semiconductors, adding tin (Sn) into the alloy appears as the obvious next step, which leads to additional possibilities for tailoring the material properties. Adding Sn enables effective band g…
▽ More
For many years, Si1-yGey alloys have been applied in the semiconductor industry due to the ability to adjust the performance of Si-based nanoelectronic devices. Following this alloying approach of group-IV semiconductors, adding tin (Sn) into the alloy appears as the obvious next step, which leads to additional possibilities for tailoring the material properties. Adding Sn enables effective band gap and strain engineering and can improve the carrier mobilities, which makes Si1-x-yGeySnx alloys promising candidates for future opto- and nanoelectronics applications. The bottom-up approach for epitaxial growth of Si1-x-yGeySnx, e.g., by chemical vapor deposition and molecular beam epitaxy, allows tuning the material properties in the growth direction only; the realization of local material modifications to generate lateral heterostructures with such a bottom-up approach is extremely elaborate, since it would require the use of lithography, etching, and either selective epitaxy or epitaxy and chemical-mechanical polishing giving rise to interface issues, non-planar substrates, etc. This article shows the possibility of fabricating Si1-x-yGeySnx alloys by Sn ion beam implantation into Si1-yGey layers followed by millisecond-range flash lamp annealing (FLA). The materials are investigated by Rutherford backscattering spectrometry, micro Raman spectroscopy, X-ray diffraction, and transmission electron microscopy. The fabrication approach was adapted to ultra-thin Si1-yGey layers on silicon-on-insulator substrates. The results show the fabrication of single-crystalline Si1-x-yGeySnx with up to 2.3 at.% incorporated Sn without any indication of Sn segregation after recrystallization via FLA. Finally, we exhibit the possibility of implanting Sn locally in ultra-thin Si1-yGey films by masking unstructured regions on the chip.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
Role of electron and ion irradiation in a reliable lift-off process with e-beam evaporation and a bilayer PMMA resist system
Authors:
Bin Sun,
Thomas Grap,
Thorben Frahm,
Stefan Scholz,
Joachim Knoch
Abstract:
This paper addresses issues related to cracking and blisters in deposited films encountered in a lift-off process with electron beam evaporation and a bilayer PMMA resist system. The impact of charged particles, i.e. electrons and ions, is investigated using an electron beam evaporation chamber equipped with ring-magnets and a plate electrode placed in front of the sample. By replacing the plate e…
▽ More
This paper addresses issues related to cracking and blisters in deposited films encountered in a lift-off process with electron beam evaporation and a bilayer PMMA resist system. The impact of charged particles, i.e. electrons and ions, is investigated using an electron beam evaporation chamber equipped with ring-magnets and a plate electrode placed in front of the sample. By replacing the plate electrode with a hollow cylinder, the modified evaporation setup utilizing passive components allows a complete elimination of resist shrinkage and blistering yielding near perfect deposition results for a large variety of different materials.
△ Less
Submitted 26 April, 2021;
originally announced April 2021.
On the Performance of Dual-Gate Reconfigurable Nanowire Transistors
Authors:
Bin Sun,
Benjamin Richstein,
Patrick Liebisch,
Thorben Frahm,
Stefan Scholz,
Jens Trommer,
Thomas Mikolajick,
Joachim Knoch
Abstract:
We investigate the operation of dual-gate reconfigurable field-effect transistor (RFET) in the programgate at drain (PGAD) and program-gate at source (PGAS) configurations. To this end, dual-gate silicon nanowire (SiNW) FETs are fabricated based on anisotropic wet chemical silicon etching and nickel silicidation yielding silicide-SiNW Schottky junctions at source and drain. Whereas in PGAD-configu…
▽ More
We investigate the operation of dual-gate reconfigurable field-effect transistor (RFET) in the programgate at drain (PGAD) and program-gate at source (PGAS) configurations. To this end, dual-gate silicon nanowire (SiNW) FETs are fabricated based on anisotropic wet chemical silicon etching and nickel silicidation yielding silicide-SiNW Schottky junctions at source and drain. Whereas in PGAD-configuration ambipolar operation is suppressed, switching is deteriorated due to the injection through a Schottky-barrier. Operating the RFET in PGAS configuration yields a switching behavior close to a conventional MOSFET. This, howewer, needs to be traded off against strongly non-linear output characteristics for small bias.
△ Less
Submitted 26 February, 2021;
originally announced March 2021.