Showing 1–4 of 4 results for author: Kondo, T

Experimentally shock-induced melt veins in basalt: Improving the shock classification of eucrites

Authors: Haruka Ono, Kosuke Kurosawa, Takafumi Niihara, Takashi Mikouchi, Naotaka Tomioka, Junko Isa, Hiroyuki Kagi, Takuya Matsuzaki, Hiroshi Sakuma, Hidenori Genda, Tatsuhiro Sakaiya, Tadashi Kondo, Masahiro Kayama, Mizuho Koike, Yuji Sano, Masafumi Murayama, Wataru Satake, Takafumi Matsui

Abstract: Basaltic rocks occur widely on the terrestrial planets and differentiated asteroids, including the asteroid 4 Vesta. We conducted a shock recovery experiment with decaying compressive pulses on a terrestrial basalt at Chiba Institute of Technology, Japan. The sample recorded a range of pressures, and shock physics modeling was conducted to add a pressure scale to the observed shock features. The s… ▽ More Basaltic rocks occur widely on the terrestrial planets and differentiated asteroids, including the asteroid 4 Vesta. We conducted a shock recovery experiment with decaying compressive pulses on a terrestrial basalt at Chiba Institute of Technology, Japan. The sample recorded a range of pressures, and shock physics modeling was conducted to add a pressure scale to the observed shock features. The shocked sample was examined by optical and electron microscopy, electron back-scattered diffractometry, and Raman spectroscopy. We found that localized melting occurs at a lower pressure (~10 GPa) than previously thought (>20 GPa). The shocked basalt near the epicenter represents shock degree C of a recently proposed classification scheme for basaltic eucrites and, as such, our results provide a pressure scale for the classification scheme. Finally, we estimated the total fraction of the basaltic eucrites classified as shock degree C to be ~15% by assuming the impact velocity distribution onto Vesta. △ Less

Submitted 21 December, 2022; originally announced December 2022.

Comments: 17 pages, 4 figures, 1 table, 1 supplementary Information, accepted for publication in Geophysical Research Letters

Shock recovery with decaying compressive pulses: Shock effects in calcite (CaCO$_3$) around the Hugoniot elastic limit

Authors: Kosuke Kurosawa, Haruka Ono, Takafumi Niihara, Tatsuhiro Sakaiya, Tadashi Kondo, Naotaka Tomioka, Takashi Mikouchi, Hidenori Genda, Takuya Matsuzaki, Masahiro Kayama, Mizuho Koike, Yuji Sano, Masafumi Murayama, Wataru Satake, Takafumi Matsui

Abstract: Shock metamorphism of minerals in meteorites provides insights into the ancient Solar System. Calcite is an abundant aqueous alteration mineral in carbonaceous chondrites. Return samples from the asteroids Ryugu and Bennu are expected to contain calcite-group minerals. Although shock metamorphism in silicates has been well studied, such data for aqueous alteration minerals are limited. Here, we in… ▽ More Shock metamorphism of minerals in meteorites provides insights into the ancient Solar System. Calcite is an abundant aqueous alteration mineral in carbonaceous chondrites. Return samples from the asteroids Ryugu and Bennu are expected to contain calcite-group minerals. Although shock metamorphism in silicates has been well studied, such data for aqueous alteration minerals are limited. Here, we investigated the shock effects in calcite with marble using impact experiments at the Planetary Exploration Research Center of Chiba Institute of Technology. We produced decaying compressive pulses with a smaller projectile than the target. A metal container facilitates recovery of a sample that retains its pre-impact stratigraphy. We estimated the peak pressure distributions in the samples with the iSALE shock physics code. The capability of this method to produce shocked grains that have experienced different degrees of metamorphism from a single experiment is an advantage over conventional uniaxial shock recovery experiments. The shocked samples were investigated by polarizing microscopy and X-ray diffraction analysis. We found that more than half of calcite grains exhibit undulatory extinction when peak pressure exceeds 3 GPa. This shock pressure is one order of magnitude higher than the Hugoniot elastic limit (HEL) of marble, but it is close to the HEL of a calcite crystal, suggesting that the undulatory extinction records dislocation-induced plastic deformation in the crystal. Finally, we propose a strategy to re-construct the maximum depth of calcite grains in a meteorite parent body, if shocked calcite grains are identified in chondrites and/or return samples from Ryugu and Bennu. △ Less

Submitted 19 May, 2022; originally announced May 2022.

Comments: 25 pages, 9 figures, 1 table, 1 supporting information, accepted for publication in Journal of Geophysical Research Planets

Data acquisition system in Run-0a for the J-PARC E16 experiment

Authors: Tomonori Takahashi, Kazuya Aoki, Sakiko Ashikaga, Wen-Chen Chang, Eitaro Hamada, Ryotaro Honda, Masaya Ichikawa, Masahiro Ikeno, Shunsuke Kajikawa, Koki Kanno, Daisuke Kawama, Takehito Kondo, Che-Sheng Lin, Chih-Hsun Lin, Yuhei Morino, Tomoki Murakami, Wataru Nakai, Satomi Nakasuga, Megumi Naruki, Yuki Obara, Kyoichiro Ozawa, Hiroyuki Sako, Susumu Sato, Hiroshi Sendai, Kazuki Suzuki , et al. (4 additional authors not shown)

Abstract: J-PARC E16 is an experiment to examine the origin of hadron mass through a systematic measurement of spectral changes of vector mesons in nuclei. The measurement of $e^{+}e^{-}$ pairs from the decay of vector mesons will provide the information of the partial restoration of the chiral symmetry in a normal nuclear density. To resolve a pulse pile-up and achieve good discrimination of $e^{\pm}$ from… ▽ More J-PARC E16 is an experiment to examine the origin of hadron mass through a systematic measurement of spectral changes of vector mesons in nuclei. The measurement of $e^{+}e^{-}$ pairs from the decay of vector mesons will provide the information of the partial restoration of the chiral symmetry in a normal nuclear density. To resolve a pulse pile-up and achieve good discrimination of $e^{\pm}$ from the background of a reaction rate of an order of 10 MHz, the data acquisition (DAQ) system uses waveform sampling chips of APV25 and DRS4. The trigger rate and data rate are expected to be 1 kHzきろへるつ and 130--330 MiB/s, respectively. The DAQ system for readout of APV25 and DRS4 were developed, where events were synchronized by common trigger and tag data. The first commissioning in beam, called Run-0a, was performed in June 2020 with about 1/4 of the designed setup. The DAQ worked with a trigger rate of 300 Hzへるつ in the Run-0a and the main bottleneck was a large data size of APV25. Further optimization of the DAQ system will improve the performance. △ Less

Submitted 31 October, 2020; originally announced November 2020.

Comments: IEEE Real Time 2020 Conference, 4 pages, 6 figures

Microfabrication of Three-Dimensional Structures in Polymer and Glass by Femtosecond Pulses

Authors: Saulius Juodkazis, Toshiaki Kondo, Vygantas Mizeikis, Shigeki Matsuo, Hiroaki Misawa, Egidijus Vanagas, Igor Kudryashov

Abstract: We report three-dimensional laser microfabrication, which enables microstructuring of materials on the scale of 0.2-1 micrometers. The two different types of microfabrication demonstrated and discussed in this work are based on holographic recording, and light-induced damage in transparent dielectric materials. Both techniques use nonlinear optical excitation of materials by ultrashort laser pul… ▽ More We report three-dimensional laser microfabrication, which enables microstructuring of materials on the scale of 0.2-1 micrometers. The two different types of microfabrication demonstrated and discussed in this work are based on holographic recording, and light-induced damage in transparent dielectric materials. Both techniques use nonlinear optical excitation of materials by ultrashort laser pulses (duration < 1 ps). △ Less

Submitted 9 May, 2002; originally announced May 2002.

Comments: This is a proceedings paper of bi-lateral Conf. (Republics of China & Lithuania) on Optoelectronics and Magnetic Materials, Taipei, May 25-26, 2002.}