-
Thermodynamic route of Nb3Sn nucleation: Role of oxygen
Authors:
Zeming Sun,
Darrah K. Dare,
Zhaslan Baraissov,
David A. Muller,
Michael O. Thompson,
Matthias U. Liepe
Abstract:
Intermetallic Nb3Sn alloys have long been believed to form through Sn diffusion into Nb. However, our observations of significant oxygen content in Nb3Sn prompted an investigation of alternative formation mechanisms. Through experiments involving different oxide interfaces (clean HF-treated, native oxidized, and anodized), we demonstrate a thermodynamic route that fundamentally challenges the conv…
▽ More
Intermetallic Nb3Sn alloys have long been believed to form through Sn diffusion into Nb. However, our observations of significant oxygen content in Nb3Sn prompted an investigation of alternative formation mechanisms. Through experiments involving different oxide interfaces (clean HF-treated, native oxidized, and anodized), we demonstrate a thermodynamic route that fundamentally challenges the conventional Sn diffusion mechanism for Nb3Sn nucleation. Our results highlight the critical involvement of a SnOx intermediate phase. This new nucleation mechanism identifies the principles for growth optimization and new synthesis of high-quality Nb3Sn superconductors.
△ Less
Submitted 7 July, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Surface oxides, carbides, and impurities on RF superconducting Nb and Nb3Sn: A comprehensive analysis
Authors:
Zeming Sun,
Zhaslan Baraissov,
Catherine A. Dukes,
Darrah K. Dare,
Thomas Oseroff,
Michael O. Thompson,
David A. Muller,
Matthias U. Liepe
Abstract:
Surface structures on radio-frequency (RF) superconductors are crucially important in determining their interaction with the RF field. Here we investigate the surface compositions, structural profiles, and valence distributions of oxides, carbides, and impurities on niobium (Nb) and niobium-tin (Nb3Sn) in situ under different processing conditions. We establish the underlying mechanisms of vacuum…
▽ More
Surface structures on radio-frequency (RF) superconductors are crucially important in determining their interaction with the RF field. Here we investigate the surface compositions, structural profiles, and valence distributions of oxides, carbides, and impurities on niobium (Nb) and niobium-tin (Nb3Sn) in situ under different processing conditions. We establish the underlying mechanisms of vacuum baking and nitrogen processing in Nb and demonstrate that carbide formation induced during high-temperature baking, regardless of gas environment, determines subsequent oxide formation upon air exposure or low-temperature baking, leading to modifications of the electron population profile. Our findings support the combined contribution of surface oxides and second-phase formation to the outcome of ultra-high vacuum baking (oxygen processing) and nitrogen processing. Also, we observe that vapor-diffused Nb3Sn contains thick metastable oxides, while electrochemically synthesized Nb3Sn only has a thin oxide layer. Our findings reveal fundamental mechanisms of baking and processing Nb and Nb3Sn surface structures for high-performance superconducting RF and quantum applications
△ Less
Submitted 16 October, 2023; v1 submitted 3 May, 2023;
originally announced May 2023.
-
ZrNb(CO) RF superconducting thin film with high critical temperature in the theoretical limit
Authors:
Zeming Sun,
Thomas Oseroff,
Zhaslan Baraissov,
Darrah K. Dare,
Katrina Howard,
Benjamin Francis,
Ajinkya C. Hire,
Nathan Sitaraman,
Tomas A. Arias,
Mark K. Transtrum,
Richard Hennig,
Michael O. Thompson,
David A. Muller,
Matthias U. Liepe
Abstract:
Superconducting radio-frequency (SRF) resonators are critical components for particle accelerator applications, such as free-electron lasers, and for emerging technologies in quantum computing. Developing advanced materials and their deposition processes to produce RF superconductors that yield nanoohms surface resistances is a key metric for the wider adoption of SRF technology. Here we report Zr…
▽ More
Superconducting radio-frequency (SRF) resonators are critical components for particle accelerator applications, such as free-electron lasers, and for emerging technologies in quantum computing. Developing advanced materials and their deposition processes to produce RF superconductors that yield nanoohms surface resistances is a key metric for the wider adoption of SRF technology. Here we report ZrNb(CO) RF superconducting films with high critical temperatures (Tc) achieved for the first time under ambient pressure. The attainment of a Tc near the theoretical limit for this material without applied pressure is promising for its use in practical applications. A range of Tc, likely arising from Zr doping variation, may allow a tunable superconducting coherence length that lowers the sensitivity to material defects when an ultra-low surface resistance is required. Our ZrNb(CO) films are synthesized using a low-temperature (100 - 200 C) electrochemical recipe combined with thermal annealing. The phase transformation as a function of annealing temperature and time is optimized by the evaporated Zr-Nb diffusion couples. Through phase control, we avoid hexagonal Zr phases that are equilibrium-stable but degrade Tc. X-ray and electron diffraction combined with photoelectron spectroscopy reveal a system containing cubic ZrNb mixed with rocksalt NbC and low-dielectric-loss ZrO2. We demonstrate proof-of-concept RF performance of ZrNb(CO) on an SRF sample test system. BCS resistance trends lower than reference Nb, while quench fields occur at approximately 35 mT. Our results demonstrate the potential of ZrNb(CO) thin films for particle accelerator and other SRF applications.
△ Less
Submitted 12 June, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
Smooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis
Authors:
Zeming Sun,
Zhaslan Baraissov,
Ryan D. Porter,
Liana Shpani,
Yu-Tsun Shao,
Thomas Oseroff,
Michael O. Thompson,
David A. Muller,
Matthias U. Liepe
Abstract:
Workbench-size particle accelerators, enabled by Nb3Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and X-rays. Thin-film Nb3Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices.…
▽ More
Workbench-size particle accelerators, enabled by Nb3Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and X-rays. Thin-film Nb3Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices. However, surface roughness, non-stoichiometry, and impurities in Nb3Sn deposited by conventional Sn-vapor diffusion prevent them from reaching their theoretical capabilities. Here we demonstrate a seed-free electrochemical synthesis that pushes the limit of chemical and physical properties in Nb3Sn. Utilization of electrochemical Sn pre-deposits reduces the roughness of converted Nb3Sn by five times compared to typical vapor-diffused Nb3Sn. Quantitative mappings using chemical and atomic probes confirm improved stoichiometry and minimized impurity concentrations in electrochemically synthesized Nb3Sn. We have successfully applied this Nb3Sn to the large-scale 1.3 GHz SRF cavity and demonstrated ultra-low BCS surface resistances at multiple operation temperatures, notably lower than vapor-diffused cavities. Our smooth, homogeneous, high-purity Nb3Sn provides the route toward high efficiency and high fields for SRF applications under helium-free cryogenic operations.
△ Less
Submitted 5 September, 2023; v1 submitted 3 February, 2023;
originally announced February 2023.
-
Electrochemical Polishing of Chemical Vapor Deposited Niobium Thin Films
Authors:
Zeming Sun,
Mingqi Ge,
James T. Maniscalco,
Victor Arrieta,
Shawn R. McNeal,
Matthias U. Liepe
Abstract:
Combining chemical vapor deposition (CVD) with electrochemical polish (EP) operations is a promising route to producing performance-capable superconducting films for use in the fabrication of cost-effective components for superconducting radiofrequency (SRF) particle accelerators and superconducting quantum computers. The post-deposition EP process enables a critically necessary reduction in surfa…
▽ More
Combining chemical vapor deposition (CVD) with electrochemical polish (EP) operations is a promising route to producing performance-capable superconducting films for use in the fabrication of cost-effective components for superconducting radiofrequency (SRF) particle accelerators and superconducting quantum computers. The post-deposition EP process enables a critically necessary reduction in surface roughness of niobium thin films to promote optimal superconducting surface conditions. In this work, surface morphology, roughness, and crystal orientation of the CVD-grown and EP-polished niobium films were investigated. The grain growth and polishing mechanisms were analyzed. The CVD films were found to comprise steps, kinks, and pyramidal features, resulting in undesirable large peak-to-valley distances. The electrochemical polish was demonstrated to significantly diminish the height of pyramids and effectively minimize the overall surface roughness. In contrast to buffered chemical polishing (BCP), EP results showed a probable dependence on crystal orientation, suggesting this process was influenced by locally enhanced current density and thickness variations of oxide dielectrics. These understandings identify the EP principles tied to CVD-grown Nb films that allow further refinement of surface profiles for film-based SRF applications
△ Less
Submitted 2 January, 2023;
originally announced January 2023.
-
Thermal annealing of sputtered Nb3Sn and V3Si thin films for superconducting radio-frequency cavities
Authors:
Katrina Howard,
Zeming Sun,
Matthias U. Liepe
Abstract:
Nb3Sn and V3Si thin films are promising candidates as thin films for the next generation of superconducting radio-frequency (SRF) cavities. However, sputtered films often suffer from stoichiometry and strain issues during deposition and post annealing. In this study, we explore the structural and chemical effects of thermal annealing, both in-situ and post-sputtering, on DC-sputtered Nb3Sn and V3S…
▽ More
Nb3Sn and V3Si thin films are promising candidates as thin films for the next generation of superconducting radio-frequency (SRF) cavities. However, sputtered films often suffer from stoichiometry and strain issues during deposition and post annealing. In this study, we explore the structural and chemical effects of thermal annealing, both in-situ and post-sputtering, on DC-sputtered Nb3Sn and V3Si films of varying thickness on Nb or Cu substrates, extending from our initial studies [1]. Through annealing at 950 °C, we successfully enabled recrystallization of 100 nm thin Nb3Sn films on Nb substrate with stoichiometric and strain-free grains. For 2 um thick films, we observed the removal of strain and a slight increase in grain size with increasing temperature. Annealing enabled a phase transformation from unstable to stable structure on V3Si films, while we observed significant Sn loss in 2 um thick Nb3Sn films after high temperature anneals. We observed similar Sn and Si loss on films atop Cu substrates during annealing, likely due to Cu-Sn and Cu-Si phase generation and subsequent Sn and Si evaporation. These results encourage us to refine our process to obtain high-quality sputtered films for SRF use.
△ Less
Submitted 2 January, 2023;
originally announced January 2023.
-
RF Accelerator Technology R&D: Report of AF7-rf Topical Group to Snowmass 2021
Authors:
Sergey Belomestnykh,
Emilio A. Nanni,
Hans Weise,
Sergey V. Baryshev,
Pashupati Dhakal,
Rongli Geng,
Bianca Giaccone,
Chunguang Jing,
Matthias Liepe,
Xueying Lu,
Tianhuan Luo,
Ganapati Myneni,
Alireza Nassiri,
David Neuffer,
Cho-Kuen Ng,
Sam Posen,
Sami Tantawi,
Anne-Marie Valente-Feliciano,
Jean-Luc Vay,
Brandon Weatherford,
Akira Yamamoto
Abstract:
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existi…
▽ More
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existing facilities, improvements to accelerators already under construction (e.g., PIP-II), well-developed proposals (e.g., ILC, CLIC), and/or enable concepts under development, such as FCC-ee, CEPC, C3, HELEN, multi-MW Fermilab Proton Intensity Upgrade, future Muon Colloder, etc. Advances in RF technology have impact beyond HEP on accelerators built for nuclear physics, basic energy sciences, and other areas. Recent examples of such accelerators are European XFEL, LCLS-II and LCLS-II-HE, SHINE, SNS, ESS, FRIB, and EIC. To support and enable new accelerator-based applications and even make some of them feasible, we must continue addressing their challenges via a comprehensive RF R&D program that would advance the existing RF technologies and explore the nascent ones.
△ Less
Submitted 25 August, 2022;
originally announced August 2022.
-
Key directions for research and development of superconducting radio frequency cavities
Authors:
S. Belomestnykh,
S. Posen,
D. Bafia,
S. Balachandran,
M. Bertucci,
A. Burrill,
A. Cano,
M. Checchin,
G. Ciovati,
L. D. Cooley,
G. Dalla Lana Semione,
J. Delayen,
G. Eremeev,
F. Furuta,
F. Gerigk,
B. Giaccone,
D. Gonnella,
A. Grassellino,
A. Gurevich,
W. Hillert,
M. Iavarone,
J. Knobloch,
T. Kubo,
W. K. Kwok,
R. Laxdal
, et al. (31 additional authors not shown)
Abstract:
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and…
▽ More
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.
△ Less
Submitted 21 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
C$^3$ Demonstration Research and Development Plan
Authors:
Emilio A. Nanni,
Martin Breidenbach,
Caterina Vernieri,
Sergey Belomestnykh,
Pushpalatha Bhat,
Sergei Nagaitsev,
Mei Bai,
William Berg,
Tim Barklow,
John Byrd,
Ankur Dhar,
Ram C. Dhuley,
Chris Doss,
Joseph Duris,
Auralee Edelen,
Claudio Emma,
Josef Frisch,
Annika Gabriel,
Spencer Gessner,
Carsten Hast,
Chunguang Jing,
Arkadiy Klebaner,
Anatoly K. Krasnykh,
John Lewellen,
Matthias Liepe
, et al. (25 additional authors not shown)
Abstract:
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced stat…
▽ More
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.
△ Less
Submitted 6 July, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Higgs-Energy LEptoN (HELEN) Collider based on advanced superconducting radio frequency technology
Authors:
S. Belomestnykh,
P. C. Bhat,
A. Grassellino,
M. Checchin,
D. Denisov,
R. L. Geng,
S. Jindariani,
M. Liepe,
M. Martinello,
P. Merkel,
S. Nagaitsev,
H. Padamsee,
S. Posen,
R. A. Rimmer,
A. Romanenko,
V. Shiltsev,
A. Valishev,
V. Yakovlev
Abstract:
This Snowmass 2021 contributed paper discusses a Higgs-Energy LEptoN (HELEN) $e^+e^-$ linear collider based on advances superconducting radio frequency technology. The proposed collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab with an Interaction Region within the site boundaries. After the initial physics run at 250 GeV, the collide…
▽ More
This Snowmass 2021 contributed paper discusses a Higgs-Energy LEptoN (HELEN) $e^+e^-$ linear collider based on advances superconducting radio frequency technology. The proposed collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab with an Interaction Region within the site boundaries. After the initial physics run at 250 GeV, the collider could be upgraded either to higher luminosity or to higher (up to 500 GeV) energies. If the ILC could not be realized in Japan in a timely fashion, the HELEN collider would be a viable option to build a Higgs factory in the U.S.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Nb3Sn Superconducting Radiofrequency Cavities: a Maturing Technology for Particle Accelerators and Detectors
Authors:
S. Posen,
M. Liepe,
G. Eremeev,
U. Pudasaini,
C. E. Reece
Abstract:
Nb3Sn superconducting radiofrequency (SRF) cavities have substantial potential for enabling new performance capabilities for particle accelerators for high energy physics (HEP), as well as for RF cavity-based detectors for dark matter, gravitational waves, and other quantum sensing applications. Outside of HEP, Nb3Sn SRF cavities can also benefit accelerators for nuclear physics, basic energy scie…
▽ More
Nb3Sn superconducting radiofrequency (SRF) cavities have substantial potential for enabling new performance capabilities for particle accelerators for high energy physics (HEP), as well as for RF cavity-based detectors for dark matter, gravitational waves, and other quantum sensing applications. Outside of HEP, Nb3Sn SRF cavities can also benefit accelerators for nuclear physics, basic energy sciences, and the industry. In this contribution to Snowmass 2021, we overview the potential, status, and outlook of Nb3Sn SRF cavities.
△ Less
Submitted 13 March, 2022;
originally announced March 2022.
-
Higgs Factory Considerations
Authors:
J. A. Bagger,
B. C. Barish,
S. Belomestnykh,
P. C. Bhat,
J. E. Brau,
M. Demarteau,
D. Denisov,
S. C. Eno,
C. G. R. Geddes,
P. D. Grannis,
A. Hutton,
A. J. Lankford,
M. U. Liepe,
D. B. MacFarlane,
T. Markiewicz,
H. E. Montgomery,
J. R. Patterson,
M. Perelstein,
M. E. Peskin,
M. C. Ross,
J. Strube,
A. P. White,
G. W. Wilson
Abstract:
We discuss considerations that can be used to formulate recommendations for initiating a lepton collider project that would provide precision studies of the Higgs boson and related electroweak phenomena.
We discuss considerations that can be used to formulate recommendations for initiating a lepton collider project that would provide precision studies of the Higgs boson and related electroweak phenomena.
△ Less
Submitted 17 March, 2022; v1 submitted 11 March, 2022;
originally announced March 2022.
-
Dissipation by surface states in superconducting RF cavities
Authors:
Sean Deyo,
Michelle Kelley,
Nathan Sitaraman,
Thomas Oseroff,
Danilo B. Liarte,
Tomas Arias,
Matthias Liepe,
James P. Sethna
Abstract:
Recent experiments on superconducting cavities have found that under large radio-frequency (RF) electromagnetic fields the quality factor can improve with increasing field amplitude, a so-called "anti-Q slope." Linear theories of dissipation break down under these extreme conditions and are unable to explain this behavior. We numerically solve the Bogoliubov-de Gennes equations at the surface of a…
▽ More
Recent experiments on superconducting cavities have found that under large radio-frequency (RF) electromagnetic fields the quality factor can improve with increasing field amplitude, a so-called "anti-Q slope." Linear theories of dissipation break down under these extreme conditions and are unable to explain this behavior. We numerically solve the Bogoliubov-de Gennes equations at the surface of a superconductor in a parallel AC magnetic field, finding that at large fields there are quasiparticle surface states with energies below the bulk value of the superconducting gap. As the field oscillates, such states emerge and disappear with every cycle. We consider the dissipation resulting from inelastic quasiparticle-phonon scattering into these states and investigate the ability of this mechanism to explain features of the experimental observations, including the field dependence of the quality factor. We find that this mechanism is likely not the dominant source of dissipation and does not produce an anti-Q slope by itself; however, we demonstrate in a modified two-fluid model how these bound states can play a role in producing an anti-Q slope.
△ Less
Submitted 19 September, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Stable CW Operation of Nb$_3$Sn SRF Cavity at 10 MV/m using Conduction Cooling
Authors:
Neil Stilin,
Adam Holic,
Matthias Liepe,
Ryan Porter,
James Sears
Abstract:
Superconducting radio-frequency (SRF) accelerating cavities are a promising technology for compact, high-power, MeV-scale accelerators, providing continuous beam operation for a wide range of potential applications in industry, medicine, national security, and science. However, SRF cavities have traditionally been cooled using complex and expensive cryogenic infrastructure, which has been a signif…
▽ More
Superconducting radio-frequency (SRF) accelerating cavities are a promising technology for compact, high-power, MeV-scale accelerators, providing continuous beam operation for a wide range of potential applications in industry, medicine, national security, and science. However, SRF cavities have traditionally been cooled using complex and expensive cryogenic infrastructure, which has been a significant obstacle in employing this powerful technology in small-scale systems. With the recent progress on high-performance Nb$_3$Sn-coated SRF cavities and the introduction of cryocoolers, which can provide turn-key style conduction cooling below 4.2 K, this barrier can now be overcome. At Cornell University, we have developed a prototype setup that utilizes a commercial cryocooler to provide the necessary cooling for operation of a 2.6 GHz Nb$_3$Sn-coated SRF cavity. We have now demonstrated first stable operation in continuous mode at accelerating fields up to 10 MV/m with a quality factor of Q$_0$ = 4x10$^9$, thereby achieving an important milestone in making turn-key SRF a reality.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
$\textit{Ab Initio}$ Study of Antisite Defects in Nb$_3$Sn: Phase Diagram and Impact on Superconductivity
Authors:
Nathan S. Sitaraman,
Jared Carlson,
Alden R. Pack,
Ryan D. Porter,
Matthias U. Liepe,
Mark K. Transtrum,
Tomás A. Arias
Abstract:
Antisite defects play a critical role in Nb$_3$Sn superconducting radio frequency (SRF) cavity physics. Such defects are the primary form of disorder in Nb$_3$Sn, and are responsible for stoichiometry variations, including experimentally observed tin-depleted regions within grains and tin-rich regions around grain boundaries. But why they cluster to form regions of different stoichiometries and ho…
▽ More
Antisite defects play a critical role in Nb$_3$Sn superconducting radio frequency (SRF) cavity physics. Such defects are the primary form of disorder in Nb$_3$Sn, and are responsible for stoichiometry variations, including experimentally observed tin-depleted regions within grains and tin-rich regions around grain boundaries. But why they cluster to form regions of different stoichiometries and how they affect the SRF properties of Nb$_3$Sn cavities are not fully understood. Using $\textit{ab initio}$ techniques, we calculate the A15 region of the Nb-Sn phase diagram, discuss a possible modification to the phase diagram near grain boundaries, and calculate $T_c$ as a function of stoichiometry, including experimentally inaccessible tin-rich stoichiometry. We find that the impact of antisite defects on the density of states near the Fermi-level of Nb$_3$Sn plays a key role in determining many of their properties. These results improve our understanding of the obstacles facing Nb$_3$Sn SRF systems, and how modified growth processes might overcome them.
△ Less
Submitted 16 December, 2019;
originally announced December 2019.
-
Active Suppression of Microphonics Detuning in high $Q_L$ Cavities
Authors:
Nilanjan Banerjee,
Georg Hoffstaetter,
Matthias Liepe,
Peter Quigley,
Zeyu Zhou
Abstract:
Operation of Superconducting Radio Frequency (SRF) cavities with high loaded quality factors is becoming increasingly preferred for applications which involve low beam loading including Energy Recovery Linacs (ERL). Vibration induced microphonics detuning poses a major operational bottleneck in these low bandwidth systems, adversely affecting field stability. Besides passive measures of mitigating…
▽ More
Operation of Superconducting Radio Frequency (SRF) cavities with high loaded quality factors is becoming increasingly preferred for applications which involve low beam loading including Energy Recovery Linacs (ERL). Vibration induced microphonics detuning poses a major operational bottleneck in these low bandwidth systems, adversely affecting field stability. Besides passive measures of mitigating the vibration sources, modern SRF cavities are also attached to fast tuners incorporating piezo-electric actuators. We demonstrate the narrow band active noise control algorithm for realizing active resonance control and propose a modification based on the Least Mean Square approach to adaptively tune the control parameters and study it's stability and performance. We discuss our experience of using passive mitigation techniques while commissioning the Main Linac Cryomodule of the Cornell-BNL ERL Test Accelerator (CBETA) and report a net reduction in peak detuning by more than a factor of 2 in its unstiffened cavities. Finally, we demonstrate stable performance of our resonance control system with consistent reduction of peak microphonics detuning by almost a factor of 2 on multiple cavities.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
Critical Fields of Nb$_3$Sn Prepared for Superconducting Cavities
Authors:
S. Keckert,
T. Junginger,
T. Buck,
D. Hall,
P. Kolb,
O. Kugeler,
R. Laxdal,
M. Liepe,
S. Posen,
T. Prokscha,
Z. Salman,
A. Suter,
J. Knobloch
Abstract:
Nb$_3$Sn is currently the most promising material other than niobium for future superconducting radiofrequency cavities. Critical fields above 120 mT in pulsed operation and about 80 mT in CW have been achieved in cavity tests. This is large compared to the lower critical field as derived from the London penetration depth, extracted from low field surface impedance measurements. In this paper dire…
▽ More
Nb$_3$Sn is currently the most promising material other than niobium for future superconducting radiofrequency cavities. Critical fields above 120 mT in pulsed operation and about 80 mT in CW have been achieved in cavity tests. This is large compared to the lower critical field as derived from the London penetration depth, extracted from low field surface impedance measurements. In this paper direct measurements of the London penetration depth from which the lower critical field and the superheating field are derived are presented. The field of first vortex penetration is measured under DC and RF fields. The combined results confirm that Nb$_3$Sn cavities are indeed operated in a metastable state above the lower critical field but are currently limited to a critical field well below the superheating field.
△ Less
Submitted 16 April, 2019; v1 submitted 31 October, 2018;
originally announced October 2018.
-
Vortex dynamics and losses due to pinning: Dissipation from trapped magnetic flux in resonant superconducting radio-frequency cavities
Authors:
Danilo B. Liarte,
Daniel Hall,
Peter N. Koufalis,
Akira Miyazaki,
Alen Senanian,
Matthias Liepe,
James P. Sethna
Abstract:
We use a model of vortex dynamics and collective weak pinning theory to study the residual dissipation due to trapped magnetic flux in a dirty superconductor. Using simple estimates, approximate analytical calculations, and numerical simulations, we make predictions and comparisons with experiments performed in CERN and Cornell on resonant superconducting radio-frequency NbCu, doped-Nb and Nb$_3$S…
▽ More
We use a model of vortex dynamics and collective weak pinning theory to study the residual dissipation due to trapped magnetic flux in a dirty superconductor. Using simple estimates, approximate analytical calculations, and numerical simulations, we make predictions and comparisons with experiments performed in CERN and Cornell on resonant superconducting radio-frequency NbCu, doped-Nb and Nb$_3$Sn cavities. We invoke hysteretic losses originating in a rugged pinning potential landscape to explain the linear behavior of the sensitivity of the residual resistance to trapped magnetic flux as a function of the amplitude of the radio-frequency field. Our calculations also predict and describe the crossover from hysteretic-dominated to viscous-dominated regimes of dissipation. We propose simple formulas describing power losses and crossover behavior, which can be used to guide the tuning of material parameters to optimize cavity performance.
△ Less
Submitted 22 October, 2018; v1 submitted 3 August, 2018;
originally announced August 2018.
-
Atomic scale analysis of Nb3Sn on Nb prepared by a vapor-diffusion process for superconducting radiofrequency cavity applications
Authors:
Jaeyel Lee,
Sam Posen,
Zugang Mao,
Yulia Trenikhina,
Kai He,
Daniel L Hall,
Matthias Liepe,
David N Seidman
Abstract:
We report an atomic-scale analysis of the microstructure of Nb3Sn coating on Nb prepared by vapor diffusion process for superconducting radiofrequency (SRF) cavity application using transmission electron microscopy (TEM). Epitaxial growth of Nb3Sn on the Nb substrate is found and four types of orientation relationships at the Nb3Sn/Nb interface are identified by electron diffraction or high-resolu…
▽ More
We report an atomic-scale analysis of the microstructure of Nb3Sn coating on Nb prepared by vapor diffusion process for superconducting radiofrequency (SRF) cavity application using transmission electron microscopy (TEM). Epitaxial growth of Nb3Sn on the Nb substrate is found and four types of orientation relationships at the Nb3Sn/Nb interface are identified by electron diffraction or high-resolution scanning transmission electron microscopy (STEM) analysis. Thin Nb3Sn grains are observed in regions with low Sn flux and they have the specific orientation relationship, Nb3Sn (1-20)//Nb (-111) and Nb3Sn (002)//Nb (0-11). The Nb3Sn/Nb interface of thin grains had a large lattice mismatch, 12.3 at.%, and a high density of misfit dislocations was observed by HR-STEM. Based on our microstructural analysis of the thin grains, we conclude that the thin regions are probably a result of a slow interfacial reaction with this particular orientation relationship at the interface. The Sn-deficient regions are seen to form initially at the Nb3Sn/Nb interface and remain in the grains due to the slow diffusion of Sn in bulk Nb3Sn. The formation of Sn-deficient regions and the effects of strain and interfacial energies on the formation of Sn-deficient regions at various interfaces were also estimated by first-principle calculation. The finding of orientation relationships at the Nb3Sn/Nb interface provides important information about the formation of defects in Nb3Sn coatings such as large thin regions, Sn-deficient regions, which are critical to the performance of Nb3Sn superconducting radiofrequency cavities for accelerators.
△ Less
Submitted 30 June, 2019; v1 submitted 10 July, 2018;
originally announced July 2018.
-
Evidence for quantized vortex entry in Nb3Sn under the influence of RF fields
Authors:
Daniel Leslie Hall,
Matthias Liepe,
Ryan Douglas Porter
Abstract:
Evidence for quantized magnetic vortex entry at a defect into a Type-II superconductor operating in the metastable state above Bc1 while under the influence of RF electromagnetic fields has been observed in a polycrystalline coating of Nb3Sn. The measurement was made using a 1.3 GHz microwave cavity for use in particle accelerator R&D and equipped with a temperature mapping system for precision me…
▽ More
Evidence for quantized magnetic vortex entry at a defect into a Type-II superconductor operating in the metastable state above Bc1 while under the influence of RF electromagnetic fields has been observed in a polycrystalline coating of Nb3Sn. The measurement was made using a 1.3 GHz microwave cavity for use in particle accelerator R&D and equipped with a temperature mapping system for precision measurements of local heating. At peak RF fields near the quench field of the cavity, discrete jumps in local heating at the quench origin were observed. A number of these jumps were found to be identical in height within measurement error. This suggests entry of a limited number of vortices at a defect. The behavior observed appears to be consistent with recent theoretical predictions regarding vortex entry at grain boundaries in the material.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
SRF Theory Developments from the Center for Bright Beams
Authors:
Danilo B. Liarte,
Tomas Arias,
Daniel L. Hall,
Matthias Liepe,
James P. Sethna,
Nathan Sitaraman,
Alden Pack,
Mark K. Transtrum
Abstract:
We present theoretical studies of SRF materials from the Center for Bright Beams. First, we discuss the effects of disorder, inhomogeneities, and materials anisotropy on the maximum parallel surface field that a superconductor can sustain in an SRF cavity, using linear stability in conjunction with Ginzburg-Landau and Eilenberger theory. We connect our disorder mediated vortex nucleation model to…
▽ More
We present theoretical studies of SRF materials from the Center for Bright Beams. First, we discuss the effects of disorder, inhomogeneities, and materials anisotropy on the maximum parallel surface field that a superconductor can sustain in an SRF cavity, using linear stability in conjunction with Ginzburg-Landau and Eilenberger theory. We connect our disorder mediated vortex nucleation model to current experimental developments of Nb$_3$Sn and other cavity materials. Second, we use time-dependent Ginzburg-Landau simulations to explore the role of inhomogeneities in nucleating vortices, and discuss the effects of trapped magnetic flux on the residual resistance of weakly- pinned Nb$_3$Sn cavities. Third, we present first-principles density-functional theory (DFT) calculations to uncover and characterize the key fundamental materials processes underlying the growth of Nb$_3$Sn. Our calculations give us key information about how, where, and when the observed tin-depletedregions form. Based on this we plan to develop new coating protocols to mitigate the formation of tin depleted regions.
△ Less
Submitted 27 July, 2017;
originally announced July 2017.
-
Performance-defining properties of Nb$_3$Sn coating in SRF cavities
Authors:
Y. Trenikhina,
S. Posen,
A. Romanenko,
M. Sardela,
J. -M. Zuo,
D. L. Hall,
M. Liepe
Abstract:
Nb$_3$Sn has great potential to become the material of choice for fabrication of SRF cavities. The higher critical temperature of Nb$_3$Sn potentially allows for an increased operational temperature in SRF cavities, which could enable tremendous simplification of cryogenic system, leading to significant cost reduction. We present extended characterization of a Nb$_3$Sn coated Nb cavity prepared at…
▽ More
Nb$_3$Sn has great potential to become the material of choice for fabrication of SRF cavities. The higher critical temperature of Nb$_3$Sn potentially allows for an increased operational temperature in SRF cavities, which could enable tremendous simplification of cryogenic system, leading to significant cost reduction. We present extended characterization of a Nb$_3$Sn coated Nb cavity prepared at Cornell University. Using combination of thermometry during cavity RF measurements, and structural and analytical characterization of the cavity cutouts, we discover Nb$_3$Sn coating flaws responsible for the poor cavity performance. Our results clearly show degraded material quality in the cavity cutouts which exhibit significant heating during the RF testing. Results of extended comparison of cavity cutouts with different dissipation profiles not only point out the cause of significant Q-slope but also establish figures of merit for material qualities in relation to the quality of SRF performance.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
CBETA Design Report, Cornell-BNL ERL Test Accelerator
Authors:
G. H. Hoffstaetter,
D. Trbojevic,
C. Mayes,
N. Banerjee,
J. Barley,
I. Bazarov,
A. Bartnik,
J. S. Berg,
S. Brooks,
D. Burke,
J. Crittenden,
L. Cultrera,
J. Dobbins,
D. Douglas,
B. Dunham,
R. Eichhorn,
S. Full,
F. Furuta,
C. Franck,
R. Gallagher,
M. Ge,
C. Gulliford,
B. Heltsley,
D. Jusic,
R. Kaplan
, et al. (29 additional authors not shown)
Abstract:
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Rec…
▽ More
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Recovery Linacs (ERLs), with a new characteristic set of beam parameters. Technology has been prototyped that is essential for any high brightness electron ERL. This includes a DC electron source and an SRF injector Linac with world-record current and normalized brightness in a bunch train, a high-current linac cryomodule, and a high-power beam stop, and several diagnostics tools for high-current and high-brightness beams. All these are now being used to construct a novel one-cryomodule ERL in Cornell's Wilson Lab. Brookhaven National Laboratory (BNL) has designed a multi-turn ERL for eRHIC, where beam is transported more than 20 times around the 4km long RHIC tunnel. The number of transport lines is minimized by using two arcs with strongly-focusing permanent magnets that can control many beams of different energies. A collaboration between BNL and Cornell has been formed to investigate this multi-turn eRHIC ERL design by building a 4-turn, one-cryomodule ERL at Cornell. It also has a return loop built with strongly focusing permanent magnets and is meant to accelerate 40mA beam to 150MeV. This high-brightness beam will have applications beyond accelerator research, in industry, in nuclear physics, and in X-ray science.
△ Less
Submitted 13 June, 2017;
originally announced June 2017.
-
Effects of Interstitial Oxygen and Carbon on Niobium Superconducting Cavities
Authors:
P. N. Koufalis,
D. L. Hall,
M. Liepe,
J. T. Maniscalco
Abstract:
We present results on the effects of interstitial oxygen and carbon on a bulk-niobium superconducting radio-frequency cavity. Previous experiments have shown that high-temperature (~800 $^\circ\text{C}$) nitrogen-doping plays the dominant role in the reduction of the electron mean free path in the RF penetration layer of niobium that leads to a decrease in microwave surface resistance and a suppre…
▽ More
We present results on the effects of interstitial oxygen and carbon on a bulk-niobium superconducting radio-frequency cavity. Previous experiments have shown that high-temperature (~800 $^\circ\text{C}$) nitrogen-doping plays the dominant role in the reduction of the electron mean free path in the RF penetration layer of niobium that leads to a decrease in microwave surface resistance and a suppression the temperature-dependent component of the surface resistance with increasing accelerating gradient. In this work, we show that oxygen and carbon-doping has very similar effects on cavity performance, demonstrating that these effects are not unique to nitrogen. The preparation method used in the introduction of interstitial oxygen and carbon has the advantage that it is done at lower temperatures than that of high-temperature nitrogen-doping and does not require post-treatment electro-polishing.
△ Less
Submitted 31 January, 2017; v1 submitted 25 December, 2016;
originally announced December 2016.
-
Theoretical estimates of maximum fields in superconducting resonant radio frequency cavities: Stability theory, disorder, and laminates
Authors:
Danilo B. Liarte,
Sam Posen,
Mark K. Transtrum,
Gianluigi Catelani,
Matthias Liepe,
James P. Sethna
Abstract:
Theoretical limits to the performance of superconductors in high magnetic fields parallel to their surfaces are of key relevance to current and future accelerating cavities, especially those made of new higher-Tc materials such as Nb$_3$Sn, NbN, and MgB$_2$. Indeed, beyond the so-called superheating field $H_{\mathcal{sh}}$, flux will spontaneously penetrate even a perfect superconducting surface…
▽ More
Theoretical limits to the performance of superconductors in high magnetic fields parallel to their surfaces are of key relevance to current and future accelerating cavities, especially those made of new higher-Tc materials such as Nb$_3$Sn, NbN, and MgB$_2$. Indeed, beyond the so-called superheating field $H_{\mathcal{sh}}$, flux will spontaneously penetrate even a perfect superconducting surface and ruin the performance. We present intuitive arguments and simple estimates for $H_{\mathcal{sh}}$, and combine them with our previous rigorous calculations, which we summarize. We briefly discuss experimental measurements of the superheating field, comparing to our estimates. We explore the effects of materials anisotropy and the danger of disorder in nucleating vortex entry. Will we need to control surface orientation in the layered compound MgB$_2$? Can we estimate theoretically whether dirt and defects make these new materials fundamentally more challenging to optimize than niobium? Finally, we discuss and analyze recent proposals to use thin superconducting layers or laminates to enhance the performance of superconducting cavities. Flux entering a laminate can lead to so-called pancake vortices; we consider the physics of the dislocation motion and potential re-annihilation or stabilization of these vortices after their entry.
△ Less
Submitted 26 October, 2016; v1 submitted 30 July, 2016;
originally announced August 2016.
-
The Importance of the Electron Mean Free Path for Superconducting RF Cavities
Authors:
J. T. Maniscalco,
D. Gonnella,
M. Liepe
Abstract:
Impurity-doping is an exciting new technology in the field of SRF, producing cavities with record-high quality factor $Q_0$ and BCS surface resistance that decreases with increasing RF field. Recent theoretical work has offered a promising explanation for this anti-Q-slope, but the link between the decreasing surface resistance and the short mean free path of doped cavities has remained elusive. I…
▽ More
Impurity-doping is an exciting new technology in the field of SRF, producing cavities with record-high quality factor $Q_0$ and BCS surface resistance that decreases with increasing RF field. Recent theoretical work has offered a promising explanation for this anti-Q-slope, but the link between the decreasing surface resistance and the short mean free path of doped cavities has remained elusive. In this work we investigate this link, finding that the magnitude of this decrease varies directly with the mean free path: shorter mean free paths correspond with stronger anti-Q-slopes. We draw a theoretical connection between the mean free path and the overheating of the quasiparticles, which leads to the reduction of the anti-Q-slope towards the normal Q-slope of long-mean-free-path cavities. We also investigate the sensitivity of the residual resistance to trapped magnetic flux, a property which is greatly enhanced for doped cavities, and calculate an optimal doping regime for a given amount of trapped flux.
△ Less
Submitted 5 August, 2016; v1 submitted 5 July, 2016;
originally announced July 2016.
-
Sensitivity of Niobium Superconducting Cavities to Trapped Magnetic Flux Dissipation
Authors:
Dan Gonnella,
John Kaufman,
Matthias Liepe
Abstract:
Future particle accelerators such as the the SLAC ``Linac Coherent Light Source-II'' (LCLS-II) and the proposed Cornell Energy Recovery Linac (ERL) require hundreds of superconducting radio-frequency (SRF) cavities operating in continuous wave (CW) mode. In order to achieve economic feasibility of projects such as these, the cavities must achieve a very high intrinsic quality factor ($Q_0$) to kee…
▽ More
Future particle accelerators such as the the SLAC ``Linac Coherent Light Source-II'' (LCLS-II) and the proposed Cornell Energy Recovery Linac (ERL) require hundreds of superconducting radio-frequency (SRF) cavities operating in continuous wave (CW) mode. In order to achieve economic feasibility of projects such as these, the cavities must achieve a very high intrinsic quality factor ($Q_0$) to keep cryogenic losses within feasible limits. To reach these high $Q_0$'s in the case of LCLS-II, nitrogen-doping has been proposed as a cavity preparation technique. When dealing with $Q_0$'s greater than 1\e{10}, the effects of ambient magnetic field on $Q_0$ become significant. Here we show that the sensitivity to RF losses from trapped magnetic field in a cavity's walls is strongly dependent on the cavity preparation. Specifically, standard electropolished and 120$^\circ$C baked cavities show a residual resistance sensitivity to trapped magnetic flux of $\sim0.6$ and $\sim0.8$ n$Ω$/mG trapped, respectively, while nitrogen-doped cavities show a sensitivity of $\sim$ 1 to 5 n$Ω$/mG trapped. We show that this difference in sensitivities is directly related to the mean free path of the RF surface layer of the niobium: shorter mean free paths lead to less residual resistance sensitivity to trapped magnetic flux in the dirty limit ($\ell<<ξ_0$) while longer mean free paths lead to lower sensitivity in the clean limit ($\ell>>ξ_0$). These experimental results are also shown to have good agreement with recent theoretical predictions for pinned vortex lines oscillating in RF fields.
△ Less
Submitted 24 November, 2015; v1 submitted 14 September, 2015;
originally announced September 2015.
-
A temperature-mapping system for multi-cell SRF accelerating cavities
Authors:
M. Ge,
G. Hoffstaetter,
F. Furuta,
E. Smith,
M. Liepe,
S. Posen,
H. Padamsee,
D. Hartill,
X. Mi
Abstract:
A Temperature mapping (T-map) system for Superconducting Radio Frequency (SRF) cavities consists of a thermometer array positioned precisely on an exterior cavity wall, capable of detecting small increases in temperature; therefore it is a powerful tool for research on the quality factor (Q0) of SRF cavities. A new multi-cell T-mapping system is has been developed at Cornell University. The system…
▽ More
A Temperature mapping (T-map) system for Superconducting Radio Frequency (SRF) cavities consists of a thermometer array positioned precisely on an exterior cavity wall, capable of detecting small increases in temperature; therefore it is a powerful tool for research on the quality factor (Q0) of SRF cavities. A new multi-cell T-mapping system is has been developed at Cornell University. The system has nearly two thousand thermometers to cover 7-cell SRF cavities for Cornell ERL project. A new multiplexing scheme was adopted to reduce number of wires. A 1mK resolution of the temperature increase Delta T is achieved. A 9-cell cavity of TESLA geometry was tested with the T-map system. By converting Delta T to power loss and quality factor, it has been found that for this cavity, most surface losses were generated by the first cell when the accelerating gradient is increased above 15MV/m. The comparison of Q-value between with and without hotspots shows the heating on cavity wall degraded cavity Q0 about 1.65 times. The power loss on the hotspots is about 40% of the total power. Effective and intuitive ways of displaying surface properties of the cavity interior, e.g. the residual resistivity, will be shown.
△ Less
Submitted 7 August, 2015;
originally announced August 2015.
-
Field-dependent surface resistance of a superconducting RF cavity caused by surface impurity
Authors:
M. Ge,
F. Furuta,
M. Liepe,
G. Hoffstaetter
Abstract:
Q-slope issue, which is caused by the field dependent surface resistance, puzzled people for a long time in SRF fields. In this paper, we related the Q-slope with surface treatments; and proposed a surface-impurity model to explain the field-dependent of surface resistance of SRF cavities. Eighteen cavity-test results have been analyzed to examine the model. These cavities were treated by differen…
▽ More
Q-slope issue, which is caused by the field dependent surface resistance, puzzled people for a long time in SRF fields. In this paper, we related the Q-slope with surface treatments; and proposed a surface-impurity model to explain the field-dependent of surface resistance of SRF cavities. Eighteen cavity-test results have been analyzed to examine the model. These cavities were treated by different recipes: Nitrogen-doping; BCP and HF-rinsing; EP with 120°C baking; and EP without 120°C baking. The performance of these cavities, which is normally represented by cavity quality factor versus accelerating gradient or surface magnetic field curves (Q0 vs. Eacc or Q0 vs. B), has included all types of Q-slope, such as Low-field Q-slope, Medium-field Q-slope, and Anti-Q-slope. The data fittings are quite successful; the fitting results will be shown. The model can be used to evaluate the effectiveness of the surface treatments. At last, the paper discussed the way to build a high-Q high-gradient SRF cavity.
△ Less
Submitted 17 August, 2015; v1 submitted 30 July, 2015;
originally announced July 2015.
-
Shielding superconductors with thin films
Authors:
Sam Posen,
Mark K. Transtrum,
Gianluigi Catelani,
Matthias U. Liepe,
James P. Sethna
Abstract:
Determining the optimal arrangement of superconducting layers to withstand large amplitude AC magnetic fields is important for certain applications such as superconducting radiofrequency cavities. In this paper, we evaluate the shielding potential of the superconducting film/insulating film/superconductor (SIS') structure, a configuration that could provide benefits in screening large AC magnetic…
▽ More
Determining the optimal arrangement of superconducting layers to withstand large amplitude AC magnetic fields is important for certain applications such as superconducting radiofrequency cavities. In this paper, we evaluate the shielding potential of the superconducting film/insulating film/superconductor (SIS') structure, a configuration that could provide benefits in screening large AC magnetic fields. After establishing that for high frequency magnetic fields, flux penetration must be avoided, the superheating field of the structure is calculated in the London limit both numerically and, for thin films, analytically. For intermediate film thicknesses and realistic material parameters we also solve numerically the Ginzburg-Landau equations. It is shown that a small enhancement of the superheating field is possible, on the order of a few percent, for the SIS' structure relative to a bulk superconductor of the film material, if the materials and thicknesses are chosen appropriately.
△ Less
Submitted 28 June, 2015;
originally announced June 2015.
-
Thermocurrents and their Role in high Q Cavity Performance
Authors:
R. Eichhorn,
C. Daly,
F. Furuta,
A. Ganshyn,
D. Gonnella,
D. Hall,
V. Ho,
G. H. Hoffstaetter,
M. Liepe,
J. May-Mann,
T. O'Connell,
S. Posen,
P. Quigley,
J. Sears,
V. Veshcherevich
Abstract:
Over the past years it became evident that the quality factor of a superconducting cavity is not only determined by its surface preparation procedure, but is also influenced by the way the cavity is cooled down. Moreover, different data sets exists, some of them indicate that a slow cool-down through the critical temperature is favourable while other data states the exact opposite. Even so there w…
▽ More
Over the past years it became evident that the quality factor of a superconducting cavity is not only determined by its surface preparation procedure, but is also influenced by the way the cavity is cooled down. Moreover, different data sets exists, some of them indicate that a slow cool-down through the critical temperature is favourable while other data states the exact opposite. Even so there where speculations and some models about the role of thermo-currents and flux-pinning, the difference in behaviour remained a mystery. In this paper we will for the first time present a consistent theoretical model which we confirmed by data that describes the role of thermo-currents, driven by temperature gradients and material transitions. We will clearly show how they impact the quality factor of a cavity, discuss our findings, relate it to findings at other labs and develop mitigation strategies which especially addresses the issue of achieving high quality factors of so-called nitrogen doped cavities in horizontal test.
△ Less
Submitted 12 January, 2015; v1 submitted 19 November, 2014;
originally announced November 2014.
-
Nitrogen-Doped 9-Cell Cavity Performance in a Test Cryomodule for LCLS-II
Authors:
Dan Gonnella,
Ralf Eichhorn,
Fumio Furuta,
Mingqi Ge,
Daniel Hall,
Vivian Ho,
Georg Hoffstaetter,
Matthias Liepe,
Tim O'Connell,
Sam Posen,
Peter Quigley,
James Sears,
Vadim Veshcherevich,
Anna Grassellino,
Alexander Romanenko,
Dmitri Sergatskov
Abstract:
The superconducting RF linac for LCLS-II calls for 1.3 GHz 9-cell cavities with an average intrinsic quality factor Q0 of 2.7x10^10 at 2 K and 16 MV/m accelerating gradient. Two niobium 9-cell cavities, prepared with nitrogen-doping at Fermilab, were assembled into the Cornell Horizontal Test Cryomodule (HTC) to test cavity performance in a cryomodule that is very similar to a full LCLS-II cryomod…
▽ More
The superconducting RF linac for LCLS-II calls for 1.3 GHz 9-cell cavities with an average intrinsic quality factor Q0 of 2.7x10^10 at 2 K and 16 MV/m accelerating gradient. Two niobium 9-cell cavities, prepared with nitrogen-doping at Fermilab, were assembled into the Cornell Horizontal Test Cryomodule (HTC) to test cavity performance in a cryomodule that is very similar to a full LCLS-II cryomodule. The cavities met LCLS-II specifications with an average quench field of 17 MV/m and an average Q0 of 3x10^10. The sensitivity of the cavities' residual resistance to ambient magnetic field was determined to be 0.5 nOhm/mG during fast cool down. In two cool downs, a heater attached to one of the cavity beam tubes was used to induce large horizontal temperature gradients. Here we report on the results of these first tests of nitrogen-doped cavities in cryomodule, which provide critical information for the LCLS-II project.
△ Less
Submitted 13 November, 2014; v1 submitted 6 November, 2014;
originally announced November 2014.
-
On superconducting niobium accelerating cavities fired under N2-gas exposure
Authors:
Ralf Eichhorn,
Daniel Gonnella,
Georg Hoffstaetter,
Matthias Liepe,
Wolfgang Weingarten
Abstract:
The dependence of the Q-value on the RF field (Q-slope) is actively studied in various accelerator laboratories. Although remedies against this dependence have been found, the physical cause still remains obscure. A rather straightforward two-fluid model description of the Q-slope in the low and high field domains is presented with emphasis on the recently experimentally identified improvement of…
▽ More
The dependence of the Q-value on the RF field (Q-slope) is actively studied in various accelerator laboratories. Although remedies against this dependence have been found, the physical cause still remains obscure. A rather straightforward two-fluid model description of the Q-slope in the low and high field domains is presented with emphasis on the recently experimentally identified improvement of the Q-value by so-called "N-doping".
△ Less
Submitted 28 May, 2015; v1 submitted 11 July, 2014;
originally announced July 2014.
-
Response to comment on theoretical RF field limits of multilayer coating structures of superconducting resonator cavities
Authors:
Sam Posen,
Gianluigi Catelani,
Matthias U. Liepe,
James P. Sethna,
Mark K. Transtrum
Abstract:
A comment to the authors' SRF Conference pre-print [1] was submitted by A. Gurevich to the arXiv [2]. In this response, we show that the arguments used in the comment are not valid.
[1] arXiv:1309.3239 [2] arXiv:1309.5626
A comment to the authors' SRF Conference pre-print [1] was submitted by A. Gurevich to the arXiv [2]. In this response, we show that the arguments used in the comment are not valid.
[1] arXiv:1309.3239 [2] arXiv:1309.5626
△ Less
Submitted 16 October, 2013;
originally announced October 2013.
-
Theoretical Field Limits for Multi-Layer Superconductors
Authors:
Sam Posen,
Gianluigi Catelani,
Matthias U. Liepe,
James P. Sethna,
Mark K. Transtrum
Abstract:
The SIS structure---a thin superconducting film on a bulk superconductor separated by a thin insulating film---was propsed as a method to protect alternative SRF materials from flux penetration by enhancing the first critical field $B_{c1}$. In this work, we show that in fact $B_{c1}$ = 0 for a SIS structure. We calculate the superheating field $B_{sh}$, and we show that it can be enhanced slightl…
▽ More
The SIS structure---a thin superconducting film on a bulk superconductor separated by a thin insulating film---was propsed as a method to protect alternative SRF materials from flux penetration by enhancing the first critical field $B_{c1}$. In this work, we show that in fact $B_{c1}$ = 0 for a SIS structure. We calculate the superheating field $B_{sh}$, and we show that it can be enhanced slightly using the SIS structure, but only for a small range of film thicknesses and only if the film and the bulk are different materials. We also show that using a multilayer instead of a single thick layer is detrimental, as this decreases $B_{sh}$ of the film. We calculate the dissipation due to vortex penetration above the $B_{sh}$ of the film, and find that it is unmanageable for SRF applications. However, we find that if a gradient in the phase of the order parameter is introduced, SIS structures may be able to shield large DC and low frequency fields. We argue that the SIS structure is not beneficial for SRF cavities, but due to recent experiments showing low-surface-resistance performance above $B_{c1}$ in cavities made of superconductors with small coherence lengths, we argue that enhancement of $B_{c1}$ is not necessary, and that bulk films of alternative materials show great promise.
△ Less
Submitted 16 September, 2013; v1 submitted 12 September, 2013;
originally announced September 2013.
-
Pulsed Superconductivity Acceleration
Authors:
M. Liepe
Abstract:
The design of the proposed linear collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities, operated in pulsed mode. Within the framework of an international collaboration the TESLA Test Facility (TTF) has been set up at DESY, providing the infrastructure for cavity R&D towards higher gradients. More than 60 nine-cell cavities were tested, accelerating gradients as high as 30 M…
▽ More
The design of the proposed linear collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities, operated in pulsed mode. Within the framework of an international collaboration the TESLA Test Facility (TTF) has been set up at DESY, providing the infrastructure for cavity R&D towards higher gradients. More than 60 nine-cell cavities were tested, accelerating gradients as high as 30 MV/m were measured. In the second production of TTF-cavities the average gradient was measured to be 24.7 MV/m. Two modules, each containing eight resonators, are presently used in the TTF-linac. These cavities are operated in pulsed mode: 0.8 ms constant gradient with up to 10 Hz repetitions rate. We will focus on two aspects: Firstly, the cavity fabrication and treatment is discussed, allowing to reach high gradients. Latest results of single cell cavities will be shown, going beyond 40 MV/m. Secondly, the pulsed mode operation of superconducting cavities is reviewed. This includes Lorentz force detuning, mechanical vibrations (microphonics) and rf field control. Both topics meet the upcoming interest in superconducting proton linacs, like the sc driver linac for SNS (Spallation Neutron Source).
△ Less
Submitted 29 September, 2000;
originally announced September 2000.
-
Superconducting Superstructure for the TESLA Collider: New Results
Authors:
N. Baboi,
M. Ferrario,
M. Liepe,
J. Sekutowicz
Abstract:
A new cavity-chain layout has been proposed for the main linac of the TESLA linear collider. This superstructure-layout is based upon four 7-cell superconducting standing-wave cavities, coupled by short beam pipes. The main advantages of the superstructure are an increase in the active accelerating length in TESLA and a saving in rf components, especially power couplers, as compared to the prese…
▽ More
A new cavity-chain layout has been proposed for the main linac of the TESLA linear collider. This superstructure-layout is based upon four 7-cell superconducting standing-wave cavities, coupled by short beam pipes. The main advantages of the superstructure are an increase in the active accelerating length in TESLA and a saving in rf components, especially power couplers, as compared to the present 9-cell cavities. The proposed scheme allows to handle the field-flatness tuning and the HOM damping at sub-unit level, in contrast to standard multi-cell cavities. The superstructure-layout is extensively studied at DESY since 1999. Computations have been performed for the rf properties of the cavity-chain, the bunch-to-bunch energy spread and multibunch dynamics. A copper model of the superstructure has been built in order to compare with the simulations and for testing the field-profile tuning and the HOM damping scheme. A "proof of principle" niobium prototype of the superstructure is now under construction and will be tested with beam at the TESLA Test Facility in 2001. In this paper we present latest results of these investigations.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.