Showing 1–50 of 289 results for author: Lin, J

Unraveling the Trigger Mechanism of Explosive Reconnection in Partially Ionized Solar Plasma

Authors: Abdullah Zafar, Lei Ni, Jun Lin, Ahmad Ali

Abstract: Plasmoid instability is usually accounted for the onset of fast reconnection events observed in astrophysical plasmas. However, the measured reconnection rate from observations can be one order of magnitude higher than that derived from MHD simulations. In this study, we present the results of magnetic reconnection in the partially ionized low solar atmosphere based on 2.5D magnetohydrodynamics (M… ▽ More Plasmoid instability is usually accounted for the onset of fast reconnection events observed in astrophysical plasmas. However, the measured reconnection rate from observations can be one order of magnitude higher than that derived from MHD simulations. In this study, we present the results of magnetic reconnection in the partially ionized low solar atmosphere based on 2.5D magnetohydrodynamics (MHD) simulations. The whole reconnection process covers two different fast reconnection phases. In the first phase, the slow Sweet-Parker reconnection transits to the plasmoid-mediated reconnection, and the reconnection rate reaches about 0.02. In the second phase, a faster explosive reconnection appears, with the reconnection rate reaching above 0.06. At the same time, a sharp decrease in plasma temperature and density at the principle X-point is observed which is associated with the strong radiative cooling, the ejection of hot plasma from the local reconnection region or the motion of principle X-point from hot and denser region to cool and less dense one along the narrow current sheet. This causes gas pressure depletion and the increasing of magnetic diffusion at the main X-point, resulting in the local Petschek-like reconnection and a violent and rapid increase in the reconnection rate. This study for the first time reveals a common phenomenon that the plasmoid dominated reconnection transits to an explosive faster reconnection with the rate approaching the order of 0.1 in partially ionized plasma in the MHD scale. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Multi-wavelength switchable single-frequency hyper Raman microlasers

Authors: Chuntao Li, Ni Yao, Jintian Lin, Renhong Gao, Jianglin Guan, Guanghui Zhao, Minghui Li, Min Wang, Lingling Qiao, Ya Cheng

Abstract: Multi-wavelength switchable single-frequency microlasers in a broad spectral range are highly desirable for integrated photonic applications due to their dynamic switching functionality, narrow linewidth, and high side-mode-suppression-ratio (SMSR). Here, a strategy based on highly efficient successive excitation of different stimulated multi-photon hyper-Raman scattering (SMPHRS) processes is pro… ▽ More Multi-wavelength switchable single-frequency microlasers in a broad spectral range are highly desirable for integrated photonic applications due to their dynamic switching functionality, narrow linewidth, and high side-mode-suppression-ratio (SMSR). Here, a strategy based on highly efficient successive excitation of different stimulated multi-photon hyper-Raman scattering (SMPHRS) processes is proposed to generate multi-wavelength switchable single-frequency hyper-Raman microlasers. This is achieved through collective precise dispersion management for arranging excitation wavelengths to trigger different phase-matched SMPHRS processes in order, mode-hopping-free tuning of the pump wavelength within a wide range of 0.75 nm by leveraging strong thermo-optical broadening of ultra-high Q modes, and simultaneously suppressing harmonics generation in a lithium niobate microcavity with high second-order nonlinearity. As a result, under continuous-wave laser pump at a low level of only 3.9 mW, SMPHRS processes from two- to five-photons emerged step by step and almost depleted previously generated multi-photon Raman signal. Consequently, four-wavelength dynamically switchable single-mode lasing from near infrared (857 nm) to ultraviolet (350 nm) spanning beyond the record range (~500 nm) with high SMSRs >35 dBでしべる is reported. △ Less

Submitted 29 June, 2024; originally announced July 2024.

Comments: 17 pages,5 figures, and 1 table

Stable Machine-Learning Parameterization of Subgrid Processes with Real Geography and Full-physics Emulation

Authors: Zeyuan Hu, Akshay Subramaniam, Zhiming Kuang, Jerry Lin, Sungduk Yu, Walter M. Hannah, Noah D. Brenowitz, Josh Romero, Michael S. Pritchard

Abstract: Modern climate projections often suffer from inadequate spatial and temporal resolution due to computational limitations, resulting in inaccurate representations of sub-resolution processes. A promising technique to address this is the Multiscale Modeling Framework (MMF), which embeds a small-domain, kilometer-resolution cloud-resolving model within each atmospheric column of a host climate model… ▽ More Modern climate projections often suffer from inadequate spatial and temporal resolution due to computational limitations, resulting in inaccurate representations of sub-resolution processes. A promising technique to address this is the Multiscale Modeling Framework (MMF), which embeds a small-domain, kilometer-resolution cloud-resolving model within each atmospheric column of a host climate model to replace traditional convection and cloud parameterizations. Machine learning (ML) offers a unique opportunity to make MMF more accessible by emulating the embedded cloud-resolving model and thereby reducing its substantial computational cost. Although many studies have demonstrated proof-of-concept success of emulating the MMF model with stable hybrid simulations, it remains a challenge to achieve operational-level success with real geography and comprehensive variable emulation, such as explicit cloud condensate coupling. In this study, we present a stable hybrid model capable of integrating for at least 5 years with near operational-level complexity, including real geography and explicit predictions of cloud condensate and wind tendencies. Our model demonstrates state-of-the-art online performance such as 5-year zonal mean biases when comparing to previous MMF emulation studies. Key factors contributing to this online performance include the use of an expressive U-Net architecture, leveraging input features that includes large-scale forcings and convective memory, and incorporating microphysics constraints. The microphysics constraints mitigate unrealistic cloud formations such as liquid clouds at freezing temperatures or excessive ice clouds in the stratosphere, which would occur in online simulations with an unconstrained ML model. △ Less

Submitted 27 June, 2024; originally announced July 2024.

The Design, Implementation, and Performance of the LZ Calibration Systems

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, E. E. Barillier, J. W. Bargemann, K. Beattie, T. Benson, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer , et al. (179 additional authors not shown)

Abstract: LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low e… ▽ More LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low energy nuclear recoils. Surrounding the TPC, two veto detectors immersed in an ultra-pure water tank enable reducing background events to enhance the discovery potential. Intricate calibration systems are purposely designed to precisely understand the responses of these three detector volumes to various types of particle interactions and to demonstrate LZ's ability to discriminate between signals and backgrounds. In this paper, we present a comprehensive discussion of the key features, requirements, and performance of the LZ calibration systems, which play a crucial role in enabling LZ's WIMP-search and its broad science program. The thorough description of these calibration systems, with an emphasis on their novel aspects, is valuable for future calibration efforts in direct dark matter and other rare-event search experiments. △ Less

Submitted 20 June, 2024; v1 submitted 2 May, 2024; originally announced June 2024.

The Data Acquisition System of the LZ Dark Matter Detector: FADR

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, E. E. Barillier, J. W. Bargemann, K. Beattie, T. Benson, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer , et al. (190 additional authors not shown)

Abstract: The Data Acquisition System (DAQ) for the LUX-ZEPLIN (LZ) dark matter detector is described. The signals from 745 PMTs, distributed across three subsystems, are sampled with 100-MHz 32-channel digitizers (DDC-32s). A basic waveform analysis is carried out on the on-board Field Programmable Gate Arrays (FPGAs) to extract information about the observed scintillation and electroluminescence signals.… ▽ More The Data Acquisition System (DAQ) for the LUX-ZEPLIN (LZ) dark matter detector is described. The signals from 745 PMTs, distributed across three subsystems, are sampled with 100-MHz 32-channel digitizers (DDC-32s). A basic waveform analysis is carried out on the on-board Field Programmable Gate Arrays (FPGAs) to extract information about the observed scintillation and electroluminescence signals. This information is used to determine if the digitized waveforms should be preserved for offline analysis. The system is designed around the Kintex-7 FPGA. In addition to digitizing the PMT signals and providing basic event selection in real time, the flexibility provided by the use of FPGAs allows us to monitor the performance of the detector and the DAQ in parallel to normal data acquisition. The hardware and software/firmware of this FPGA-based Architecture for Data acquisition and Realtime monitoring (FADR) are discussed and performance measurements are described. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Comments: 18 pages, 24 figures

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Dual-color Coherent Perfect Absorber

Authors: Boyi Xue, Jintian Lin, Jiankun Hou, Yicheng Zhu, Ruixin Ma, Xianfeng Chen, Ya Cheng, Li Ge, Wenjie Wan

Abstract: Perfect absorption of light critically affects light-matter interaction for various applications. Coherent perfect absorbers (CPA) gain the unique capability of controlling light with light in a linear fashion. Multi-color CPAs [Phys. Rev. Lett. 107, 033901] are highly desirable for broadband and nonlinear light-to-light coherent control, however, the experimental demonstration has still remained… ▽ More Perfect absorption of light critically affects light-matter interaction for various applications. Coherent perfect absorbers (CPA) gain the unique capability of controlling light with light in a linear fashion. Multi-color CPAs [Phys. Rev. Lett. 107, 033901] are highly desirable for broadband and nonlinear light-to-light coherent control, however, the experimental demonstration has still remained elusive. Here we experimentally observe a dual-color version of CPA (DC-CPA) through a second harmonic generation in a single whispering-gallery-mode microcavity. The DC-CPA enables simultaneous perfect absorption of both the incoming fundamental wave and its second harmonic. Similar to its linear counterpart, coherent control in the DC-CPA can be also realized by tuning the relative phase and intensity between the two-colored waves through nonlinear interference instead of the linear one. This scheme breaks the linear boundary of the traditional CPA into a multi-frequency domain and paves the way toward all-optically signal processing and quantum information. △ Less

Submitted 17 May, 2024; originally announced May 2024.

Interface Modes in Honeycomb Topological Photonic Structures with Broken Reflection Symmetry

Authors: Wei Li, Junshan Lin, Jiayu Qiu, Hai Zhang

Abstract: In this work, we present a mathematical theory for Dirac points and interface modes in honeycomb topological photonic structures consisting of impenetrable obstacles. Starting from a honeycomb lattice of obstacles attaining $120^\circ$-rotation symmetry and horizontal reflection symmetry, we apply the boundary integral equation method to show the existence of Dirac points for the first two bands a… ▽ More In this work, we present a mathematical theory for Dirac points and interface modes in honeycomb topological photonic structures consisting of impenetrable obstacles. Starting from a honeycomb lattice of obstacles attaining $120^\circ$-rotation symmetry and horizontal reflection symmetry, we apply the boundary integral equation method to show the existence of Dirac points for the first two bands at the vertices of the Brillouin zone. We then study interface modes in a joint honeycomb photonic structure, which consists of two periodic lattices obtained by perturbing the honeycomb one with Dirac points differently. The perturbations break the reflection symmetry of the system, as a result, they annihilate the Dirac points and generate two structures with different topological phases, which mimics the quantum valley Hall effect in topological insulators. We investigate the interface modes that decay exponentially away from the interface of the joint structure in several configurations with different interface geometries, including the zigzag interface, the armchair interface, and the rational interfaces. Using the layer potential technique and asymptotic analysis, we first characterize the band-gap opening for the two perturbed periodic structures and derive the asymptotic expansions of the Bloch modes near the band gap surfaces. By formulating the eigenvalue problem for each joint honeycomb structure using boundary integral equations over the interface and analyzing the characteristic values of the associated boundary integral operators, we prove the existence of interface modes when the perturbation is small. △ Less

Submitted 6 May, 2024; v1 submitted 6 May, 2024; originally announced May 2024.

Tunable plasmonic properties of spatially overlapping asymmetric nanoparticle dimers

Authors: Merneh Mandado Mana, Bereket Dalga Dana, Alemayehu Nana Koya, Boyu Ji, Jingquan Lin

Abstract: In this work, the plasmonic properties of nanoparticle dimers with optical responses over a wide spectral range have been investigated by varying the inter-particle gap, dimer geometry, gap morphology, nanoparticle composition, and refractive index of the surrounding medium. In particular, we have theoretically investigated the plasmonic properties of spatially overlapping symmetric gold nanodisks… ▽ More In this work, the plasmonic properties of nanoparticle dimers with optical responses over a wide spectral range have been investigated by varying the inter-particle gap, dimer geometry, gap morphology, nanoparticle composition, and refractive index of the surrounding medium. In particular, we have theoretically investigated the plasmonic properties of spatially overlapping symmetric gold nanodisks, shape-asymmetric gold nanodisk nanoplates, and compositionally asymmetric gold-silver nanodisk dimers by varying the gap separation from touching to overlapping regime. In such a configuration, we have observed the appearance of a dominant bonding dimer plasmon (BDP) mode that blue-shifts as gap separation turns from touching to overlapping. In addition, it is found that asymmetric dimer produces a broader resonance shift compared to symmetric dimer because of the hybridization of bright and dark plasmon modes, making it a viable option for sensing applications. It is also found that blue shifting of the plasmon mode occurred by changing the gap morphology of the contacting region of the dimer for fixed nanoparticle size and dimer overlapping. Moreover, we explored the influence of overlapping nanoparticle dimer thickness and observed a notable resonance shift by varying the thickness of the nanoparticle dimer. Finally, based on this tunable resonance shift, we explored the sensing applications of bonding dimer plasmon mode with optimized geometries. Thus, the computed figure of merit (FOM) of the overlapping symmetric, shape-asymmetric, and compositionally asymmetric nanoparticle dimers were found to be 1.55, 2.08, and 3.04, respectively, and comparative advantages among the three configurations with implications for surface-based sensing have been thoroughly discussed. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Observation of Generalized t-J Spin Dynamics with Tunable Dipolar Interactions

Authors: Annette N. Carroll, Henrik Hirzler, Calder Miller, David Wellnitz, Sean R. Muleady, Junyu Lin, Krzysztof P. Zamarski, Reuben R. W. Wang, John L. Bohn, Ana Maria Rey, Jun Ye

Abstract: Long-range and anisotropic dipolar interactions profoundly modify the dynamics of particles hopping in a periodic lattice potential. Here, we report the realization of a generalized t-J model with dipolar interactions using a system of ultracold fermionic molecules with spin encoded in the two lowest rotational states. We systematically explore the role of dipolar Ising and spin-exchange couplings… ▽ More Long-range and anisotropic dipolar interactions profoundly modify the dynamics of particles hopping in a periodic lattice potential. Here, we report the realization of a generalized t-J model with dipolar interactions using a system of ultracold fermionic molecules with spin encoded in the two lowest rotational states. We systematically explore the role of dipolar Ising and spin-exchange couplings and the effect of motion on spin dynamics. The model parameters can be controlled independently, with dipolar couplings tuned by electric fields and motion regulated by optical lattices. Using Ramsey spectroscopy, we observed interaction-driven contrast decay that depends strongly both on the strength of the anisotropy between Ising and spin-exchange couplings and on motion. These observations are supported by theory models established in different motional regimes that provide intuitive pictures of the underlying physics. This study paves the way for future exploration of kinetic spin dynamics and quantum magnetism with highly tunable molecular platforms in regimes challenging for existing numerical and analytical methods, and it could shed light on the complex behaviors observed in real materials. △ Less

Submitted 30 April, 2024; v1 submitted 29 April, 2024; originally announced April 2024.

Two-axis twisting using Floquet-engineered XYZ spin models with polar molecules

Authors: Calder Miller, Annette N. Carroll, Junyu Lin, Henrik Hirzler, Haoyang Gao, Hengyun Zhou, Mikhail D. Lukin, Jun Ye

Abstract: Polar molecules confined in an optical lattice are a versatile platform to explore spin-motion dynamics based on strong, long-range dipolar interactions. The precise tunability of Ising and spin-exchange interactions with both microwave and dc electric fields makes the molecular system particularly suitable for engineering complex many-body dynamics. Here, we used Floquet engineering to realize in… ▽ More Polar molecules confined in an optical lattice are a versatile platform to explore spin-motion dynamics based on strong, long-range dipolar interactions. The precise tunability of Ising and spin-exchange interactions with both microwave and dc electric fields makes the molecular system particularly suitable for engineering complex many-body dynamics. Here, we used Floquet engineering to realize interesting quantum many-body systems of polar molecules. Using a spin encoded in the two lowest rotational states of ultracold KRb molecules, we mutually validated XXZ spin models tuned by a Floquet microwave pulse sequence against those tuned by a dc electric field through observations of Ramsey contrast dynamics, setting the stage for the realization of Hamiltonians inaccessible with static fields. In particular, we observed two-axis twisting mean-field dynamics, generated by a Floquet-engineered XYZ model using itinerant molecules in 2D layers. In the future, Floquet-engineered Hamiltonians could generate entangled states for molecule-based precision measurement or could take advantage of the rich molecular structure for quantum simulation of multi-level systems. △ Less

Submitted 30 April, 2024; v1 submitted 29 April, 2024; originally announced April 2024.

Comments: 20 pages, 4 figures + 4 extended data figures

High Numerical Aperture and Broadband Achromatic Flat Lens

Authors: Jingen Lin, Jinbei Chen, Jianchao Zhang, Haowen Liang, Juntao Li, Xue-Hua Wang

Abstract: Flat lenses have shown promising applications in miniaturized and ultracompact lightweight optical systems. However, it has been a great challenge in simultaneously achieving broadband achromatism and high numerical aperture. Here, we demonstrate that this long-term dilemma can be broken through by the zone division multiplex of the meta-atoms on a composite substrate possessing stepwise optical t… ▽ More Flat lenses have shown promising applications in miniaturized and ultracompact lightweight optical systems. However, it has been a great challenge in simultaneously achieving broadband achromatism and high numerical aperture. Here, we demonstrate that this long-term dilemma can be broken through by the zone division multiplex of the meta-atoms on a composite substrate possessing stepwise optical thickness. The aperture size can be freely expanded by increasing the optical thickness difference between the central and marginal zones of the substrate, free from achromatic bandwidth. The achromatic flat lens with both 0.9 numerical aperture and bandwidth of 650-1000 nm is experimentally achieved. A microscopic imaging with 1.1 μみゅーm resolution has also demonstrated. These unprecedented performances mark a substantial step toward practical applications of the flat lenses. △ Less

Submitted 26 April, 2024; originally announced April 2024.

Seismic Interpolation Transformer for Consecutively Missing Data: A Case Study in DAS-VSP Data

Authors: Ming Cheng, Jun Lin, Xintong Dong, Shaoping Lu, Tie Zhong

Abstract: Distributed optical fiber acoustic sensing (DAS) is a rapidly-developed seismic acquisition technology with advantages of low cost, high resolution, high sensitivity, and small interval, etc. Nonetheless, consecutively missing cases often appear in real seismic data acquired by DAS system due to some factors, including optical fiber damage and inferior coupling between cable and well. Recently, so… ▽ More Distributed optical fiber acoustic sensing (DAS) is a rapidly-developed seismic acquisition technology with advantages of low cost, high resolution, high sensitivity, and small interval, etc. Nonetheless, consecutively missing cases often appear in real seismic data acquired by DAS system due to some factors, including optical fiber damage and inferior coupling between cable and well. Recently, some deep-learning seismic interpolation methods based on convolutional neural network (CNN) have shown impressive performance in regular and random missing cases but still remain the consecutively missing case as a challenging task. The main reason is that the weight sharing makes it difficult for CNN to capture enough comprehensive features. In this paper, we propose a transformer-based interpolation method, called seismic interpolation transformer (SIT), to deal with the consecutively missing case. This proposed SIT is an encoder-decoder structure connected by some U-shaped swin-transformer blocks. In encoder and decoder part, the multi-head self-attention (MSA) mechanism is used to capture global features which is essential for the reconstruction of consecutively missing traces. The U-shaped swin-transformer blocks are utilized to perform feature extraction operations on feature maps with different resolutions. Moreover, we combine the loss based on structural similarity index (SSIM) and L1 norm to propose a novel loss function for SIT. In experiments, this proposed SIT outperforms U-Net and swin-transformer. Moreover, ablation studies also demonstrate the advantages of new network architecture and loss function. △ Less

Submitted 20 April, 2024; originally announced April 2024.

Criticality in the Luria-Delbrück model with an arbitrary mutation rate

Authors: Deng Pan, Jie Lin, Ariel Amir

Abstract: The Luria-Delbrück model is a classic model of population dynamics with random mutations, that has been used historically to prove that random mutations drive evolution. In typical scenarios, the relevant mutation rate is exceedingly small, and mutants are counted only at the final time point. Here, inspired by recent experiments on DNA repair, we study a mathematical model that is formally equiva… ▽ More The Luria-Delbrück model is a classic model of population dynamics with random mutations, that has been used historically to prove that random mutations drive evolution. In typical scenarios, the relevant mutation rate is exceedingly small, and mutants are counted only at the final time point. Here, inspired by recent experiments on DNA repair, we study a mathematical model that is formally equivalent to the Luria-Delbrück setup, with the repair rate $p$ playing the role of mutation rate, albeit taking on large values, of order unity per cell division. We find that although at large times the fraction of repaired cells approaches one, the variance of the number of repaired cells undergoes a phase transition: when $p>1/2$ the variance decreases with time, but, intriguingly, for $p<1/2$ even though the fraction of repaired cells approaches 1, the variance in number of repaired cells increases with time. Analyzing DNA-repair experiments, we find that in order to explain the data the model should also take into account the probability of a successful repair process once it is initiated. Taken together, our work shows how the study of variability can lead to surprising phase-transitions as well as provide biological insights into the process of DNA-repair. △ Less

Submitted 20 February, 2024; originally announced February 2024.

Comments: 5 pages, 4 figures

Subwavelength Photorefractive Grating in a Thin-Film Lithium Niobate Microcavity

Authors: Jiankun Hou, Jiefu Zhu, Ruixin Ma, Boyi Xue, Yicheng Zhu, Jintian Lin, Xiaoshun Jiang, Xianfeng Chen, Ya Cheng, Li Ge, Yuanlin Zheng, Wenjie Wan

Abstract: Subwavelength gratings play a fundamental and pivotal role in numerous science and applications for wave manipulation, exhibiting distinctive features such as filtering, phase manipulation, and anti-reflection. However, conventional fabrication methods for ultrasmall periodic structures are constrained by the fundamental optical diffraction limit, making it challenging to produce subwavelength gra… ▽ More Subwavelength gratings play a fundamental and pivotal role in numerous science and applications for wave manipulation, exhibiting distinctive features such as filtering, phase manipulation, and anti-reflection. However, conventional fabrication methods for ultrasmall periodic structures are constrained by the fundamental optical diffraction limit, making it challenging to produce subwavelength gratings for optics. Here, we demonstrate a novel technique to build a reconfigurable subwavelength photorefractive grating (SPG) in a thin-film lithium niobate on the platform of an optical microcavity. Such SPGs are optically induced through the photorefractive effect and the subwavelength features originate from the spatial phase modulations of the pump's standing wave. The resulting SPGs lead to the mode splitting of two counter-propagating modes inside the microcavity, exhibiting an Electromagnetically Induced Transparency (EIT)-like transmission spectrum. Moreover, the unique subwavelength characteristic of SPGs enables first-order quasi-phase-matching for backward second-harmonic generation, a long-standing problem in nonlinear optics. Also, free-space-to-chip vertical nonlinear frequency conversion can be achieved in a similar manner. These results provide a flexible approach towards fabricating subwavelength gratings, which holds significant potential in various applications such as nonlinear frequency conversion, optical communication, sensing, and quantum technologies. △ Less

Submitted 13 February, 2024; originally announced February 2024.

Coherent Imaging with Photonic Lanterns

Authors: Yoo Jung Kim, Michael P. Fitzgerald, Jonathan Lin, Steph Sallum, Yinzi Xin, Nemanja Jovanovic, Sergio Leon-Saval

Abstract: Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pup… ▽ More Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pupil, analogous to subapertures in aperture masking interferometry (AMI). Coherent imaging with PLs can be enabled by interfering SMF outputs and applying phase modulation, which can be achieved using a photonic chip beam combiner at the backend (e.g., the ABCD beam combiner). In this study, we investigate the potential of coherent imaging by interfering SMF outputs of a PL with a single telescope. We demonstrate that the visibilities that can be measured from a PL are mutual intensities incident on the pupil weighted by the cross-correlation of a pair of lantern modes. From numerically simulated lantern principal modes of a 6-port PL, we find that interferometric observables using a PL behave similarly to separated-aperture visibilities for simple models on small angular scales ($<λらむだ/D$) but with greater sensitivity to symmetries and capability to break phase angle degeneracies. Furthermore, we present simulated observations with wavefront errors and compare them to AMI. Despite the redundancy caused by extended lantern principal modes, spatial filtering offers stability to wavefront errors. Our simulated observations suggest that PLs may offer significant benefits in the photon noise-limited regime and in resolving small angular scales at low contrast regime. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Comments: Accepted for publication in ApJ

Real-time Dynamics of the Schwinger Model as an Open Quantum System with Neural Density Operators

Authors: Joshua Lin, Di Luo, Xiaojun Yao, Phiala E. Shanahan

Abstract: Ab-initio simulations of multiple heavy quarks propagating in a Quark-Gluon Plasma are computationally difficult to perform due to the large dimension of the space of density matrices. This work develops machine learning algorithms to overcome this difficulty by approximating exact quantum states with neural network parametrisations, specifically Neural Density Operators. As a proof of principle d… ▽ More Ab-initio simulations of multiple heavy quarks propagating in a Quark-Gluon Plasma are computationally difficult to perform due to the large dimension of the space of density matrices. This work develops machine learning algorithms to overcome this difficulty by approximating exact quantum states with neural network parametrisations, specifically Neural Density Operators. As a proof of principle demonstration in a QCD-like theory, the approach is applied to solve the Lindblad master equation in the 1+1d lattice Schwinger Model as an open quantum system. Neural Density Operators enable the study of in-medium dynamics on large lattice volumes, where multiple-string interactions and their effects on string-breaking and recombination phenomena can be studied. Thermal properties of the system at equilibrium can also be probed with these methods by variationally constructing the steady state of the Lindblad master equation. Scaling of this approach with system size is studied, and numerical demonstrations on up to 32 spatial lattice sites and with up to 3 interacting strings are performed. △ Less

Submitted 9 February, 2024; originally announced February 2024.

Comments: 23 pages, 11 figures

Report number: MIT-CTP/5679,IQuS@UW-21-073

Enhanced Frequency Conversion in Parity-Time Symmetry Line

Authors: Jiankun Hou, Jiefu Zhu, Ruixin Ma, Boyi Xue, Yicheng Zhu, Jintian Lin, Xiaoshun Jiang, Yuanlin Zheng, Xianfeng Chen, Ya Cheng, Li Ge, Wenjie Wan

Abstract: Non-Hermitian degeneracies reveal intriguing and non-trivial behaviors in open physical systems. Examples like Parity-Time (PT) symmetry breaking, topological encircling chirality, and enhanced sensing near an exceptional point (EP) are often associated with the abrupt nature of the phase transition around these degeneracies. Here we experimentally observe a cavity-enhanced second-harmonic frequen… ▽ More Non-Hermitian degeneracies reveal intriguing and non-trivial behaviors in open physical systems. Examples like Parity-Time (PT) symmetry breaking, topological encircling chirality, and enhanced sensing near an exceptional point (EP) are often associated with the abrupt nature of the phase transition around these degeneracies. Here we experimentally observe a cavity-enhanced second-harmonic frequency (SHG) conversion on a PT symmetry line, i.e. a set consisting of open-ended isofrequency or isoloss lines, both terminated at EPs on the Riemann surface in parameter space. The enhancement factor can reach as high as 300, depending on the crossing point whether in the symmetry or the broken phase of the PT line. Moreover, such enhancement of SHG enables sensitive distance sensing with a nanometer resolution. Our works may pave the way for practical applications in sensing, frequency conversion, and coherent wave control. △ Less

Submitted 9 February, 2024; originally announced February 2024.

Poynting-Robertson damping of laser beam driven lightsails

Authors: Rhys Mackintosh, Jadon Y. Lin, Michael S. Wheatland, Boris T. Kuhlmey

Abstract: Lightsails using Earth-based lasers for propulsion require passive stabilization to stay within the beam. This can be achieved through the sail's scattering properties, creating optical restoring forces and torques. Undamped restoring forces produce uncontrolled oscillations, which could jeopardize the mission, but it is not obvious how to achieve damping in the vacuum of space. Using a simple two… ▽ More Lightsails using Earth-based lasers for propulsion require passive stabilization to stay within the beam. This can be achieved through the sail's scattering properties, creating optical restoring forces and torques. Undamped restoring forces produce uncontrolled oscillations, which could jeopardize the mission, but it is not obvious how to achieve damping in the vacuum of space. Using a simple two-dimensional model we show that the Doppler effect and relativistic aberration of the propelling laser beam create damping terms in the optical forces and torques. The effect is similar to the Poynting-Robertson effect causing loss of orbital momentum of dust particles around stars, but can be enhanced by design of the sail's geometry. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Wave-graphene: a full-auxetic carbon semiconductor with high flexibility and optical UV absorption

Authors: Linfeng Yu, Yi Zhang, Jianzhou Lin, Kexin Dong, Xiong Zheng, Zhenzhen Qin, Guangzhao Qin

Abstract: The abundant bonding possibilities of Carbon stimulate the design of numerous carbon allotropes, promising the foundation for exploring structure-functionality relationships. Herein, utilizing the space bending strategy, we successfully engineered a two-dimensional carbon allotrope with pure sp2 hybridization, named "Wave-graphene" from the unique wave-like ripple structure. The novel Wave-graphen… ▽ More The abundant bonding possibilities of Carbon stimulate the design of numerous carbon allotropes, promising the foundation for exploring structure-functionality relationships. Herein, utilizing the space bending strategy, we successfully engineered a two-dimensional carbon allotrope with pure sp2 hybridization, named "Wave-graphene" from the unique wave-like ripple structure. The novel Wave-graphene exhibits full-auxetic behavior due to anisotropic mechanical response, possessing both negative and zero Poisson's ratios. The fundamental mechanism can be attributed to the fact that highly buckled out-of-plane structures lead to anisotropic responses of in-plane nonlinear interactions, which further lead to anisotropy of lattice vibrations. In addition, Wave-graphene is found having quasi-direct wide bandgap of 2.01 eV, the excellent optical transparency and the high flexibility. The successful design of Wave-graphene with excellent outstanding multifunctional properties shows that the utilization of space bending strategies can provide more degrees of freedom for designing novel materials, further enriching the carbon material family and supplementing its versatility. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Stress-testing the coupled behavior of hybrid physics-machine learning climate simulations on an unseen, warmer climate

Authors: Jerry Lin, Mohamed Aziz Bhouri, Tom Beucler, Sungduk Yu, Michael Pritchard

Abstract: Accurate and computationally-viable representations of clouds and turbulence are a long-standing challenge for climate model development. Traditional parameterizations that crudely but efficiently approximate these processes are a leading source of uncertainty in long-term projected warming and precipitation patterns. Machine Learning (ML)-based parameterizations have long been hailed as a promisi… ▽ More Accurate and computationally-viable representations of clouds and turbulence are a long-standing challenge for climate model development. Traditional parameterizations that crudely but efficiently approximate these processes are a leading source of uncertainty in long-term projected warming and precipitation patterns. Machine Learning (ML)-based parameterizations have long been hailed as a promising alternative with the potential to yield higher accuracy at a fraction of the cost of more explicit simulations. However, these ML variants are often unpredictably unstable and inaccurate in \textit{coupled} testing (i.e. in a downstream hybrid simulation task where they are dynamically interacting with the large-scale climate model). These issues are exacerbated in out-of-distribution climates. Certain design decisions such as ``climate-invariant" feature transformation for moisture inputs, input vector expansion, and temporal history incorporation have been shown to improve coupled performance, but they may be insufficient for coupled out-of-distribution generalization. If feature selection and transformations can inoculate hybrid physics-ML climate models from non-physical, out-of-distribution extrapolation in a changing climate, there is far greater potential in extrapolating from observational data. Otherwise, training on multiple simulated climates becomes an inevitable necessity. While our results show generalization benefits from these design decisions, the obtained improvment does not sufficiently preclude the necessity of using multi-climate simulated training data. △ Less

Submitted 4 January, 2024; originally announced January 2024.

Comments: 4 Pages, 3 Figures. Accepted to NeurIPS 2023 Climate Change AI Workshop. See https://www.climatechange.ai/papers/neurips2023/62

Integrated multi-color Raman microlasers with ultra-low pump levels in single high-Q lithium niobate microdisks

Authors: Guanghui Zhao, Jintian Lin, Botao Fu, Renhong Gao, Chuntao Li, Ni Yao, Jianglin Guan, Minghui Li, Min Wang, Lingling Qiao, Ya Cheng

Abstract: Photonic integrated Raman microlasers, particularly discrete multi-color lasers which are crucial for extending the emission wavelength range of chip-scale laser sources to much shorter wavelength, are highly in demand for various spectroscopy, microscopy analysis, and biological detection. However, integrated multi-color Raman microlasers have yet to be demonstrated because of the requirement of… ▽ More Photonic integrated Raman microlasers, particularly discrete multi-color lasers which are crucial for extending the emission wavelength range of chip-scale laser sources to much shorter wavelength, are highly in demand for various spectroscopy, microscopy analysis, and biological detection. However, integrated multi-color Raman microlasers have yet to be demonstrated because of the requirement of high-Q microresonators possessing large second-order nonlinearity and strong Raman phonon branches and the challenging in cavity-enhanced multi-photon hyper-Raman scattering parametric process. In this work, integrated multi-color Raman lasers have been demonstrated for the first time at weak pump levels, via the excitation of high-Q (>6 X 10^6) phase-matched modes in single thin-film lithium niobate (TFLN) microresonators by dispersion engineering. Raman lasing was observed at 1712 nm for a 1546-nm pump threshold power of only 620 uW. Furthermore, multi-color Raman lasers were realized at discrete wavelengths of 1712 nm, 813 nm, 533 nm and 406 nm with pump levels as low as 1.60 mW, which is more than two order of magnitude lower than the current records (i.e., 200 mW) in bulk resonators, allowed by the fulfillment of the requisite conditions consisting of broadband natural phase match, multiple-resonance and high Q-factors. △ Less

Submitted 16 December, 2023; originally announced December 2023.

Comments: 16 pages,4 figures

Criteria to observe single-shot all-optical switching in Gd-based ferrimagnetic alloys

Authors: Wei Zhang, Julius Hohlfeld, Tian Xun Huang, Jun Xiao Lin, Michel Hehn, Yann Le Guen Jude Compton-Stewart, Gregory Malinowski, Wei Sheng Zhao, Stéphane Mangin

Abstract: Single-shot all-optical helicity-independent switching (AO-HIS) induced by a femto-second laser pulse has been mainly reported in Gadolinium based rare earth-transition metal (RE-TM) alloys such as GdFeCo or GdCo, but the mechanism leading to magnetization switching is a hotly debated topic. Here, we elaborate on a large number of GdyRE1-x-yCox (RE = Dy, Tb, Ho) alloys to tune various magnetic par… ▽ More Single-shot all-optical helicity-independent switching (AO-HIS) induced by a femto-second laser pulse has been mainly reported in Gadolinium based rare earth-transition metal (RE-TM) alloys such as GdFeCo or GdCo, but the mechanism leading to magnetization switching is a hotly debated topic. Here, we elaborate on a large number of GdyRE1-x-yCox (RE = Dy, Tb, Ho) alloys to tune various magnetic parameters in order to define what the criteria are for observing AO-HIS in such systems. The state diagrams show that two laser fluences thresholds must be considered:the fluence which induces the single laser pulse switching (FSwitch) and the fluence at which the material breaks into a multi-domain state (FMulti). Those two fluences are shown to behave very differently as a function of the material properties and the laser pulse duration. Taking into account the parameters defining the conditions for which multi-domain states are created and considering only the angular momentum transfer from the Gd sublattice to the rest of the system explains in large our experimental results. The importance of the compensation in the ferrimagnetic alloys is also discussed. We believe the defined criteria will be an important tool for designing new ultra-fast spintronic devices based on all optical switching. △ Less

Submitted 30 November, 2023; originally announced November 2023.

Focal-plane wavefront sensing with photonic lanterns II: numerical characterization and optimization

Authors: Jonathan Lin, Michael P. Fitzgerald, Yinzi Xin, Yoo Jung Kim, Olivier Guyon, Sergio Leon-Saval, Barnaby Norris, Nemanja Jovanovic

Abstract: We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact o… ▽ More We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact of beam-shaping optics and a charge-1 vortex mask, placed in the pupil plane. The former is motivated by the application of PLs to high-resolution spectroscopy, which could enable efficient injection into the spectrometer along with simultaneous focal-plane wavefront sensing; similarly, the latter is motivated by the application of PLs to vortex fiber nulling (VFN), which can simultaneously enable wavefront sensing and the nulling of on-axis starlight. Overall, we find that the PLWFS setups tested in this work exhibit good linearity out to ~0.25-0.5 radians of RMS wavefront error (WFE). Meanwhile, we estimate the maximum amount of WFE that can be handled by these sensors, before the sensor response becomes degenerate, to be around ~1-2 radians RMS. In the future, we expect these limits can be pushed further by increasing the number of degrees of freedom, either by adopting higher-mode-count lanterns, dispersing lantern outputs, or separating polarizations. Lastly, we consider optimization strategies for the design of the PLWFS, which involve both modification of the lantern itself and the use of pre- and post-lantern optics like phase masks and interferometric beam recombiners. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Comments: Accepted to JOSA B

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Authors: Nemanja Jovanovic, Pradip Gatkine, Narsireddy Anugu, Rodrigo Amezcua-Correa, Ritoban Basu Thakur, Charles Beichman, Chad Bender, Jean-Philippe Berger, Azzurra Bigioli, Joss Bland-Hawthorn, Guillaume Bourdarot, Charles M. Bradford, Ronald Broeke, Julia Bryant, Kevin Bundy, Ross Cheriton, Nick Cvetojevic, Momen Diab, Scott A. Diddams, Aline N. Dinkelaker, Jeroen Duis, Stephen Eikenberry, Simon Ellis, Akira Endo, Donald F. Figer , et al. (55 additional authors not shown)

Abstract: Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio… ▽ More Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

Journal ref: J. Phys. Photonics 5 042501 (2023)

Health diagnosis and recuperation of aged Li-ion batteries with data analytics and equivalent circuit modeling

Authors: Riko I Made, Jing Lin, Jintao Zhang, Yu Zhang, Lionel C. H. Moh, Zhaolin Liu, Ning Ding, Sing Yang Chiam, Edwin Khoo, Xuesong Yin, Guangyuan Wesley Zheng

Abstract: Battery health assessment and recuperation play a crucial role in the utilization of second-life Li-ion batteries. However, due to ambiguous aging mechanisms and lack of correlations between the recovery effects and operational states, it is challenging to accurately estimate battery health and devise a clear strategy for cell rejuvenation. This paper presents aging and reconditioning experiments… ▽ More Battery health assessment and recuperation play a crucial role in the utilization of second-life Li-ion batteries. However, due to ambiguous aging mechanisms and lack of correlations between the recovery effects and operational states, it is challenging to accurately estimate battery health and devise a clear strategy for cell rejuvenation. This paper presents aging and reconditioning experiments of 62 commercial high-energy type lithium iron phosphate (LFP) cells, which supplement existing datasets of high-power LFP cells. The relatively large-scale data allow us to use machine learning models to predict cycle life and identify important indicators of recoverable capacity. Considering cell-to-cell inconsistencies, an average test error of $16.84\% \pm 1.87\%$ (mean absolute percentage error) for cycle life prediction is achieved by gradient boosting regressor given information from the first 80 cycles. In addition, it is found that some of the recoverable lost capacity is attributed to the lateral lithium non-uniformity within the electrodes. An equivalent circuit model is built and experimentally validated to demonstrate how such non-uniformity can be accumulated, and how it can give rise to recoverable capacity loss. SHapley Additive exPlanations (SHAP) analysis also reveals that battery operation history significantly affects the capacity recovery. △ Less

Submitted 21 September, 2023; originally announced October 2023.

Comments: 20 pages, 5 figures, 1 table

Journal ref: iScience (2024)

Identifiability Study of Lithium-Ion Battery Capacity Fade Using Degradation Mode Sensitivity for a Minimally and Intuitively Parametrized Electrode-Specific Cell Open-Circuit Voltage Model

Authors: Jing Lin, Edwin Khoo

Abstract: When two electrode open-circuit potentials form a full-cell OCV (open-circuit voltage) model, cell-level SOH (state of health) parameters related to LLI (loss of lithium inventory) and LAM (loss of active materials) naturally appear. Such models have been used to interpret experimental OCV measurements and infer these SOH parameters associated with capacity fade. In this work, we first re-parametr… ▽ More When two electrode open-circuit potentials form a full-cell OCV (open-circuit voltage) model, cell-level SOH (state of health) parameters related to LLI (loss of lithium inventory) and LAM (loss of active materials) naturally appear. Such models have been used to interpret experimental OCV measurements and infer these SOH parameters associated with capacity fade. In this work, we first re-parametrize a popular OCV model formulation by the N/P (negative-to-positive) ratio and Li/P (lithium-to-positive) ratio, which have more symmetric and intuitive physical meaning, and are also pristine-condition-agnostic and cutoff-voltage-independent. We then study the modal identifiability of capacity fade by mathematically deriving the gradients of electrode slippage and cell OCV with respect to these SOH parameters, where the electrode differential voltage fractions, which characterize each electrode's relative contribution to the OCV slope, play a key role in passing the influence of a fixed cutoff voltage to the parameter sensitivity. The sensitivity gradients of the total capacity also reveal four characteristic regimes regarding how much lithium inventory and active materials are limiting the apparent capacity. We show the usefulness of these sensitivity gradients with an application regarding degradation mode identifiability from OCV measurements at different SOC (state of charge) windows. △ Less

Submitted 2 April, 2024; v1 submitted 29 September, 2023; originally announced September 2023.

Comments: 32 pages, 9 figures, 5 tables

Journal ref: Journal of Power Sources (2024)

Sampling Hybrid Climate Simulation at Scale to Reliably Improve Machine Learning Parameterization

Authors: Jerry Lin, Sungduk Yu, Liran Peng, Tom Beucler, Eliot Wong-Toi, Zeyuan Hu, Pierre Gentine, Margarita Geleta, Mike Pritchard

Abstract: Machine-learning (ML) parameterizations of subgrid processes (here of turbulence, convection, and radiation) may one day replace conventional parameterizations by emulating high-resolution physics without the cost of explicit simulation. However, their development has been stymied by uncertainty surrounding whether or not improved offline performance translates to improved online performance (i.e.… ▽ More Machine-learning (ML) parameterizations of subgrid processes (here of turbulence, convection, and radiation) may one day replace conventional parameterizations by emulating high-resolution physics without the cost of explicit simulation. However, their development has been stymied by uncertainty surrounding whether or not improved offline performance translates to improved online performance (i.e., when coupled to a large-scale general circulation model (GCM)). A key barrier has been the limited sampling of the online effects of the ML design decisions and tuning due to the complexity of performing large ensembles of hybrid physics-ML climate simulations. Our work examines the coupled behavior of full-physics ML parameterizations using large ensembles of hybrid simulations, totalling 2,970 in our case. With extensive sampling, we statistically confirm that lowering offline error lowers online error (given certain constraints). However, we also reveal that decisions decreasing online error, like removing dropout, can trade off against hybrid model stability and vice versa. Nevertheless, we are able to identify design decisions that yield unambiguous improvements to offline and online performance, namely incorporating memory and training on multiple climates. We also find that converting moisture input from specific to relative humidity enhances online stability and that using a Mean Absolute Error (MAE) loss breaks the aforementioned offline/online error relationship. By enabling rapid online experimentation at scale, we empirically answer previously unresolved questions regarding subgrid ML parameterization design. △ Less

Submitted 4 July, 2024; v1 submitted 28 September, 2023; originally announced September 2023.

Comments: 16 pages, 4 figures

Erbium-ytterbium co-doped lithium niobate single-mode microdisk laser with an ultralow threshold of 1 uW

Authors: Minghui Li, Renhong Gao, Chuntao Li, Jianglin Guan, Haisu Zhang, Jintian Lin, Guanghui Zhao, Qian Qiao, Min Wang, Lingling Qiao, Li Deng, Ya Cheng

Abstract: We demonstrate single-mode microdisk lasers in the telecom band with ultra-low thresholds on erbium-ytterbium co-doped thin-film lithium niobate (TFLN). The active microdisk were fabricated with high-Q factors by photo-lithography assisted chemo-mechanical etching. Thanks to the erbium-ytterbium co-doping providing high optical gain, the ultra-low loss nanostructuring, and the excitation of high-Q… ▽ More We demonstrate single-mode microdisk lasers in the telecom band with ultra-low thresholds on erbium-ytterbium co-doped thin-film lithium niobate (TFLN). The active microdisk were fabricated with high-Q factors by photo-lithography assisted chemo-mechanical etching. Thanks to the erbium-ytterbium co-doping providing high optical gain, the ultra-low loss nanostructuring, and the excitation of high-Q coherent polygon modes which suppresses multi-mode lasing and allows high spatial mode overlap factor between pump and lasing modes, single-mode laser emission operating at 1530 nm wavelength was observed with an ultra-low threshold, under 980-nm-band optical pump. The threshold was measured as low as 1 uW, which is one order of magnitude smaller than the best results previously reported in single-mode active TFLN microlasers. And the conversion efficiency reaches 0.406%, which is also the highest value reported in single-mode active TFLN microlasers. △ Less

Submitted 19 September, 2023; originally announced September 2023.

Comments: 5 pages,3 figures

The path to detecting extraterrestrial life with astrophotonics

Authors: Nemanja Jovanovic, Yinzi Xin, Michael P. Fitzgerald, Olivier Guyon, Peter Tuthill, Barnaby Norris, Pradip Gatkine, Greg Sercel, Svarun Soda, Yoo Jung Kim, Jonathan Lin, Sergio Leon-Saval, Rodrigo Amezcua-Correa, Stephanos Yerolatsitis, Julien Lozi, Sebastien Vievard, Chris Betters, Steph Sallum, Daniel Levinstein, Dimitri Mawet, Jeffrey Jewell, J. Kent Wallace, Nick Cvetojevic

Abstract: Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far,… ▽ More Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a gaping void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life. △ Less

Submitted 15 September, 2023; originally announced September 2023.

Comments: 9 pages, 2 figures, SPIE Optics and Photonics conference

Report number: 12680-17

Can the Parker Solar Probe Detect a CME-flare Current Sheet?

Authors: Yuhao Chen, Zhong Liu, Pengfei Chen, David F. Webb, Qi Hao, Jialiang Hu, Guanchong Cheng, Zhixing Mei, Jing Ye, Qian Wang, Jun Lin

Abstract: A current sheet (CS) is the central structure in the disrupting magnetic configuration during solar eruptions. More than 90\% of the free magnetic energy (the difference between the energy in the non-potential magnetic field and that in the potential one) stored in the coronal magnetic field beforehand is converted into heating and kinetic energy of the plasma, as well as accelerating charged part… ▽ More A current sheet (CS) is the central structure in the disrupting magnetic configuration during solar eruptions. More than 90\% of the free magnetic energy (the difference between the energy in the non-potential magnetic field and that in the potential one) stored in the coronal magnetic field beforehand is converted into heating and kinetic energy of the plasma, as well as accelerating charged particles, by magnetic reconnection occurring in the CS. However, the detailed physical properties and fine structures of the CS are still unknown since there is no relevant information obtained via in situ detections. The Parker Solar Probe (PSP) may provide us such information should it traverse a CS in the eruption. The perihelion of PSP's final orbit is located at about 10 solar radii from the center of the Sun, so it can observe the CS at a very close distance, or even traverses the CS, which provides us a unique opportunity to look into fine properties and structures of the CS, helping reveal the detailed physics of large-scale reconnection that was impossible before. We evaluate the probability that PSP can traverse a CS, and examine the orbit of a PSP-like spacecraft that has the highest probability to traverse a CS. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Comments: 28 pages, 12 figure, accepted by ApJS

Generation of Kerr soliton microcomb in a normally dispersed lithium niobate microdisk resonator by mode trimming

Authors: Botao Fu, Renhong Gao, Ni Yao, Haisu Zhang, Chuntao Li, Jintian Lin, Min Wang, Lingling Qiao, Ya Cheng

Abstract: Anomalous microresonator dispersion is mandatory for Kerr soliton microcomb formation, which depends critically on the geometry of the microresonator and can hardly be tuned after the structure is made. To date, cavity-based microcombs have only been generated with fundamental whispering gallery modes (WGMs) of anomalous dispersion in microresonators. Moreover, microcomb generation in highly Raman… ▽ More Anomalous microresonator dispersion is mandatory for Kerr soliton microcomb formation, which depends critically on the geometry of the microresonator and can hardly be tuned after the structure is made. To date, cavity-based microcombs have only been generated with fundamental whispering gallery modes (WGMs) of anomalous dispersion in microresonators. Moreover, microcomb generation in highly Raman-active platforms such as lithium niobate (LN) microresonators frequently suffers from stimulated Raman scattering and mode crossing due to the existence of multiple families of high-order WGMs. Here, we reveal a unique Kerr soliton microcomb generation mechanism through mode trimming in a weakly perturbed LN microdisk resonator. Remarkably, the soliton comb is generated with fundamental WGMs of normal dispersion and free from the mode crossing and Raman scattering effects. A robust soliton with a spectrum spanning from 1450 nm to 1620 nm at an on-chip pump power of 35 mW. Our discovery offers a powerful solution to circumvent the stringent requirements on high-precision dispersion engineering and termination of Raman excitation for soliton generation in the high-Q microdisk. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Comments: 16 pages,and 5 figures

Three-dimensional simulation of thermodynamics on confined turbulence in a large-scale CME-flare current sheet

Authors: Jing Ye, John C. Raymond, Zhixing Mei, Qiangwei Cai, Yuhao Chen, Yan Li, Jun Lin

Abstract: Turbulence plays a key role for forming the complex geometry of the large-scale current sheet (CS) and fast energy release in a solar eruption. In this paper, we present full 3D high-resolution simulations for the process of a moderate Coronal Mass Ejection (CME) and the thermodynamical evolution of the highly confined CS. Copious elongated blobs are generated due to tearing and plasmoid instabili… ▽ More Turbulence plays a key role for forming the complex geometry of the large-scale current sheet (CS) and fast energy release in a solar eruption. In this paper, we present full 3D high-resolution simulations for the process of a moderate Coronal Mass Ejection (CME) and the thermodynamical evolution of the highly confined CS. Copious elongated blobs are generated due to tearing and plasmoid instabilities giving rise to a higher reconnection rate and undergo the splitting, merging and kinking processes in a more complex way in 3D. A detailed thermodynamical analysis shows that the CS is mainly heated by adiabatic and numerical viscous terms, and thermal conduction is the dominant factor that balances the energy inside the CS. Accordingly, the temperature of the CS reaches to a maximum of about 20 MK and the range of temperatures is relatively narrow. From the face-on view in the synthetic Atmospheric Imaging Assembly 131 $\mathring{A}$, the downflowing structures with similar morphology to supra-arcade downflows are mainly located between the post-flare loops and loop-top, while moving blobs can extend spikes higher above the loop-top. The downward-moving plasmoids can keep the twisted magnetic field configuration until the annihilation at the flare loop-top, indicating that plasmoid reconnection dominates in the lower CS. Meanwhile, the upward-moving ones turn into turbulent structures before arriving at the bottom of the CME, implying that turbulent reconnection dominates in the upper CS. The spatial distributions of the turbulent energy and anisotropy are addressed, which show a significant variation in the spectra with height. △ Less

Submitted 18 August, 2023; originally announced August 2023.

One for Multiple: Physics-informed Synthetic Data Boosts Generalizable Deep Learning for Fast MRI Reconstruction

Authors: Zi Wang, Xiaotong Yu, Chengyan Wang, Weibo Chen, Jiazheng Wang, Ying-Hua Chu, Hongwei Sun, Rushuai Li, Peiyong Li, Fan Yang, Haiwei Han, Taishan Kang, Jianzhong Lin, Chen Yang, Shufu Chang, Zhang Shi, Sha Hua, Yan Li, Juan Hu, Liuhong Zhu, Jianjun Zhou, Meijing Lin, Jiefeng Guo, Congbo Cai, Zhong Chen , et al. (3 additional authors not shown)

Abstract: Magnetic resonance imaging (MRI) is a widely used radiological modality renowned for its radiation-free, comprehensive insights into the human body, facilitating medical diagnoses. However, the drawback of prolonged scan times hinders its accessibility. The k-space undersampling offers a solution, yet the resultant artifacts necessitate meticulous removal during image reconstruction. Although Deep… ▽ More Magnetic resonance imaging (MRI) is a widely used radiological modality renowned for its radiation-free, comprehensive insights into the human body, facilitating medical diagnoses. However, the drawback of prolonged scan times hinders its accessibility. The k-space undersampling offers a solution, yet the resultant artifacts necessitate meticulous removal during image reconstruction. Although Deep Learning (DL) has proven effective for fast MRI image reconstruction, its broader applicability across various imaging scenarios has been constrained. Challenges include the high cost and privacy restrictions associated with acquiring large-scale, diverse training data, coupled with the inherent difficulty of addressing mismatches between training and target data in existing DL methodologies. Here, we present a novel Physics-Informed Synthetic data learning framework for Fast MRI, called PISF. PISF marks a breakthrough by enabling generalized DL for multi-scenario MRI reconstruction through a single trained model. Our approach separates the reconstruction of a 2D image into many 1D basic problems, commencing with 1D data synthesis to facilitate generalization. We demonstrate that training DL models on synthetic data, coupled with enhanced learning techniques, yields in vivo MRI reconstructions comparable to or surpassing those of models trained on matched realistic datasets, reducing the reliance on real-world MRI data by up to 96%. Additionally, PISF exhibits remarkable generalizability across multiple vendors and imaging centers. Its adaptability to diverse patient populations has been validated through evaluations by ten experienced medical professionals. PISF presents a feasible and cost-effective way to significantly boost the widespread adoption of DL in various fast MRI applications. △ Less

Submitted 28 February, 2024; v1 submitted 24 July, 2023; originally announced July 2023.

Comments: 38 pages, 19 figures, 5 tables

Search for the Migdal effect in liquid xenon with keV-level nuclear recoils

Authors: Jingke Xu, Duncan Adams, Brian Lenardo, Teal Pershing, Rachel Mannino, Ethan Bernard, James Kingston, Eli Mizrachi, Junsong Lin, Rouven Essig, Vladimir Mozin, Phil Kerr, Adam Bernstein, Mani Tripathi

Abstract: The Migdal effect predicts that a nuclear recoil interaction can be accompanied by atomic ionization, allowing many dark matter direct detection experiments to gain sensitivity to sub-GeV masses. We report the first direct search for the Migdal effect for M- and L-shell electrons in liquid xenon using 7.0$\pm$1.6 keV nuclear recoils produced by tagged neutron scatters. Despite an observed backgrou… ▽ More The Migdal effect predicts that a nuclear recoil interaction can be accompanied by atomic ionization, allowing many dark matter direct detection experiments to gain sensitivity to sub-GeV masses. We report the first direct search for the Migdal effect for M- and L-shell electrons in liquid xenon using 7.0$\pm$1.6 keV nuclear recoils produced by tagged neutron scatters. Despite an observed background rate lower than that of expected signals in the region of interest, we do not observe a signal consistent with predictions. We discuss possible explanations, including inaccurate predictions for either the Migdal rate or the signal response in liquid xenon. We comment on the implications for direct dark-matter searches and future Migdal characterization efforts. △ Less

Submitted 24 July, 2023; originally announced July 2023.

Comments: 8 pages, 4 figures

Report number: LLNL-JRNL-850170

Applying Superfluid Helium to Light Dark Matter Searches: Demonstration of the HeRALD Detector Concept

Authors: R. Anthony-Petersen, A. Biekert, C. L. Chang, Y. Chang, L. Chaplinsky, A. Dushkin, C. W. Fink, M. Garcia-Sciveres, W. Guo, S. A. Hertel, X. Li, J. Lin, R. Mahapatra, W. Matava, D. N. McKinsey, D. Z. Osterman, P. K. Patel, B. Penning, H. D. Pinckney, M. Platt, M. Pyle, Y. Qi, M. Reed, G. R. C Rischbieter, R. K. Romani , et al. (11 additional authors not shown)

Abstract: The SPICE/HeRALD collaboration is performing R&D to enable studies of sub-GeV dark matter models using a variety of target materials. Here we report our recent progress on instrumenting a superfluid $^4$He target mass with a transition-edge sensor based calorimeter to detect both atomic signals (e.g. scintillation) and $^4$He quasiparticle (phonon and roton) excitations. The sensitivity of HeRALD… ▽ More The SPICE/HeRALD collaboration is performing R&D to enable studies of sub-GeV dark matter models using a variety of target materials. Here we report our recent progress on instrumenting a superfluid $^4$He target mass with a transition-edge sensor based calorimeter to detect both atomic signals (e.g. scintillation) and $^4$He quasiparticle (phonon and roton) excitations. The sensitivity of HeRALD to the critical "quantum evaporation" signal from $^4$He quasiparticles requires us to block the superfluid film flow to the calorimeter. We have developed a heat-free film-blocking method employing an unoxidized Cs film, which we implemented in a prototype "HeRALD v0.1" detector of $\sim$10~g target mass. This article reports initial studies of the atomic and quasiparticle signal channels. A key result of this work is the measurement of the quantum evaporation channel's gain of $0.15 \pm 0.012$, which will enable $^4$He-based dark matter experiments in the near term. With this gain the HeRALD detector reported here has an energy threshold of 145~eV at 5 sigma, which would be sensitive to dark matter masses down to 220~MeV/c$^2$. △ Less

Submitted 21 July, 2023; originally announced July 2023.

Comments: 14 pages, 9 figures

Controlling periodic Fano resonances of quantum acoustic waves with a giant atom coupled to microwave waveguide

Authors: Po-Chen Kuo, Jhen-Dong Lin, Yin-Chun Huang, Yueh-Nan Chen

Abstract: Nanoscale Fano resonances, with applications from telecommunications to ultra-sensitive biosensing, have prompted extensive research. We demonstrate that a superconducting qubit, jointly coupled to microwave waveguides and an inter-digital transducer composite device, can exhibit acoustic Fano resonances. Our analytical framework, leveraging the Taylor series approximation, elucidates the origins… ▽ More Nanoscale Fano resonances, with applications from telecommunications to ultra-sensitive biosensing, have prompted extensive research. We demonstrate that a superconducting qubit, jointly coupled to microwave waveguides and an inter-digital transducer composite device, can exhibit acoustic Fano resonances. Our analytical framework, leveraging the Taylor series approximation, elucidates the origins of these quantum acoustic resonances with periodic Fano-like interference. By analyzing the analytical Fano parameter, we demonstrate that the Fano resonances and their corresponding Fano widths near the resonance frequency of a giant atom can be precisely controlled and manipulated by adjusting the time delay. Moreover, not just the near-resonant Fano profiles, but the entire periodic Fano resonance features can be precisely modulated from Lorentz, Fano to quasi-Lorentz shapes by tuning the coupling strength of the microwave waveguide. Our analytical framework offers insights into the control and manipulation of periodic Fano resonances in quantum acoustic waves, thereby presenting significant potential for applications such as quantum information processing, sensing, and communication. △ Less

Submitted 16 July, 2023; originally announced July 2023.

Comments: 13 pages, 5 figures

Journal ref: Opt. Express 31, 42285-42298 (2023)

GiftBTE: An efficient deterministic solver for non-gray phonon Boltzmann transport equation

Authors: Yue Hu, Ru Jia, Jiaxuan Xu, Yufei Sheng, Minhua Wen, James Lin, Yongxing Shen, Hua Bao

Abstract: Advances in nanotechnology have facilitated the exploration of submicron thermal transport. At this scale, Fourier's law is no longer applicable, and the governing equation for thermal transport is the phonon Boltzmann transport equation (BTE). However, the availability of open-source solvers for the phonon BTE is limited, impeding progress in this field. This study introduces an open-source packa… ▽ More Advances in nanotechnology have facilitated the exploration of submicron thermal transport. At this scale, Fourier's law is no longer applicable, and the governing equation for thermal transport is the phonon Boltzmann transport equation (BTE). However, the availability of open-source solvers for the phonon BTE is limited, impeding progress in this field. This study introduces an open-source package, GiftBTE, for numerically solving the non-gray phonon BTE. GiftBTE employs deterministic solutions and provides both steady-state and transient solvers. For the steady-state solver, GiftBTE employs the implicit discrete ordinates method (DOM) with second-order spatial accuracy and the synthetic iterative scheme. For the transient solver, GiftBTE employs the explicit DOM with second-order spatial accuracy. This package demonstrates excellent computational efficiency, enabling realistic three-dimensional simulations of devices and materials. By interfacing with first-principles calculations, this solver enables parameter-free computation of submicron thermal transport. The application of GiftBTE includes, but is not limited to, computing the thermal conductivity of nanostructures, predicting temperature rises in transistors, and simulating laser heating processes. △ Less

Submitted 25 June, 2023; originally announced June 2023.

Comments: 39 pages, 7 figures

Ultra-high Q lithium niobate microring monolithically fabricated by photolithography assisted chemo-mechanical etching

Authors: Chuntao Li, Jianglin Guan, Jintian Lin, Renhong Gao, Min Wang, Lingling Qiao, Li Deng, Ya Cheng

Abstract: Thin-film lithium niobate (TFLN) has been considered as one of the most important platforms for constructing high-performance photonic integrated devices such as electro-optic modulators, frequency combs, classical/quantum light sources, and large-scale photonic integrated circuits, benefiting from its excellent optical properties of TFLN. The fabrication quality of TFLN photonic integrated device… ▽ More Thin-film lithium niobate (TFLN) has been considered as one of the most important platforms for constructing high-performance photonic integrated devices such as electro-optic modulators, frequency combs, classical/quantum light sources, and large-scale photonic integrated circuits, benefiting from its excellent optical properties of TFLN. The fabrication quality of TFLN photonic integrated devices plays an important role in the performance and the integration scale of these devices. As one of the element photonic structures, the state-of-the-art TFLN microrings reach an intrinsic Q factor higher than 10^7 with ultra-smooth sidewalls, fabricated by photolithography assisted chemo-mechanical etching (PLACE). However, it is isolated on the chip surface and a tapered fiber is required to couple the light into and out of the resonator. Furthermore, it is difficult to maintain such high-Q factors when the microrings are monolithically integrated with bus waveguides by PLACE, resulted from large coupling loss with biggish coupling gap. Here, a relatively narrow gap of an ultra-high Q microring monolithically integrated with the bus-waveguide is achieved with 3.8 um by optimizing PLACE process, and a high temperature annealing is carried out to improve the loaded (intrinsic) Q factor with 4.29 X 10^6 (4.04 X 10^7), leading an ultra-low propagation loss of less than 1 dBでしべる/m, which is approximately 3 times better than the best values previously reported in ion-slicing TFLN platform. △ Less

Submitted 18 June, 2023; originally announced June 2023.

Comments: 6 pages,3 figures,1 table

Magnetic Resonance Spectroscopy Quantification Aided by Deep Estimations of Imperfection Factors and Macromolecular Signal

Authors: Dicheng Chen, Meijin Lin, Huiting Liu, Jiayu Li, Yirong Zhou, Taishan Kang, Liangjie Lin, Zhigang Wu, Jiazheng Wang, Jing Li, Jianzhong Lin, Xi Chen, Di Guo, Xiaobo Qu

Abstract: Objective: Magnetic Resonance Spectroscopy (MRS) is an important technique for biomedical detection. However, it is challenging to accurately quantify metabolites with proton MRS due to serious overlaps of metabolite signals, imperfections because of non-ideal acquisition conditions, and interference with strong background signals mainly from macromolecules. The most popular method, LCModel, adopt… ▽ More Objective: Magnetic Resonance Spectroscopy (MRS) is an important technique for biomedical detection. However, it is challenging to accurately quantify metabolites with proton MRS due to serious overlaps of metabolite signals, imperfections because of non-ideal acquisition conditions, and interference with strong background signals mainly from macromolecules. The most popular method, LCModel, adopts complicated non-linear least square to quantify metabolites and addresses these problems by designing empirical priors such as basis-sets, imperfection factors. However, when the signal-to-noise ratio of MRS signal is low, the solution may have large deviation. Methods: Linear Least Squares (LLS) is integrated with deep learning to reduce the complexity of solving this overall quantification. First, a neural network is designed to explicitly predict the imperfection factors and the overall signal from macromolecules. Then, metabolite quantification is solved analytically with the introduced LLS. In our Quantification Network (QNet), LLS takes part in the backpropagation of network training, which allows the feedback of the quantification error into metabolite spectrum estimation. This scheme greatly improves the generalization to metabolite concentrations unseen for training compared to the end-to-end deep learning method. Results: Experiments show that compared with LCModel, the proposed QNet, has smaller quantification errors for simulated data, and presents more stable quantification for 20 healthy in vivo data at a wide range of signal-to-noise ratio. QNet also outperforms other end-to-end deep learning methods. Conclusion: This study provides an intelligent, reliable and robust MRS quantification. Significance: QNet is the first LLS quantification aided by deep learning. △ Less

Submitted 9 October, 2023; v1 submitted 16 June, 2023; originally announced June 2023.

Transverse spin-orbit interaction of light

Authors: Tong Fu, Jiaxin Lin, Yuhao Xu, Junji Jia, Yonglong Wang, Shunping Zhang, Hongxing Xu

Abstract: Light carries both longitudinal and transverse spin angular momentum. The spin can couple with its orbital counterpart via the Berry phase, known as the spin-orbit interaction (SOI) of light. The SOI of light discovered previously belongs to the longitudinal one, which relies on the Berry phase in momentum space, such as the optical Magnus effect and the spin Hall effect. Here, we show that transv… ▽ More Light carries both longitudinal and transverse spin angular momentum. The spin can couple with its orbital counterpart via the Berry phase, known as the spin-orbit interaction (SOI) of light. The SOI of light discovered previously belongs to the longitudinal one, which relies on the Berry phase in momentum space, such as the optical Magnus effect and the spin Hall effect. Here, we show that transverse SOI, relying on the Berry phase in real space, is inherent in the Helmholtz equation when transverse spinning light propagates in curved paths. The transverse SOI lifts the degeneracy of dispersion relations of light for opposite transverse spin states, analogous to the Dresselhaus effect. Transverse SOI is ubiquitous in nanophotonic systems where transverse spin and optical path bending are inevitable. It can also explain anomalous effects like the dispersion relation of surface plasmon polariton on curved paths and the energy level of whispering gallery modes. Our results reveal the analogies of spin photonics and spintronics and offer a new degree of freedom for integrated photonics, spin photonics, and astrophysics. △ Less

Submitted 15 June, 2023; originally announced June 2023.

ClimSim-Online: A Large Multi-scale Dataset and Framework for Hybrid ML-physics Climate Emulation

Authors: Sungduk Yu, Zeyuan Hu, Akshay Subramaniam, Walter Hannah, Liran Peng, Jerry Lin, Mohamed Aziz Bhouri, Ritwik Gupta, Björn Lütjens, Justus C. Will, Gunnar Behrens, Julius J. M. Busecke, Nora Loose, Charles I. Stern, Tom Beucler, Bryce Harrop, Helge Heuer, Benjamin R. Hillman, Andrea Jenney, Nana Liu, Alistair White, Tian Zheng, Zhiming Kuang, Fiaz Ahmed, Elizabeth Barnes , et al. (22 additional authors not shown)

Abstract: Modern climate projections lack adequate spatial and temporal resolution due to computational constraints, leading to inaccuracies in representing critical processes like thunderstorms that occur on the sub-resolution scale. Hybrid methods combining physics with machine learning (ML) offer faster, higher fidelity climate simulations by outsourcing compute-hungry, high-resolution simulations to ML… ▽ More Modern climate projections lack adequate spatial and temporal resolution due to computational constraints, leading to inaccuracies in representing critical processes like thunderstorms that occur on the sub-resolution scale. Hybrid methods combining physics with machine learning (ML) offer faster, higher fidelity climate simulations by outsourcing compute-hungry, high-resolution simulations to ML emulators. However, these hybrid ML-physics simulations require domain-specific data and workflows that have been inaccessible to many ML experts. As an extension of the ClimSim dataset (Yu et al., 2024), we present ClimSim-Online, which also includes an end-to-end workflow for developing hybrid ML-physics simulators. The ClimSim dataset includes 5.7 billion pairs of multivariate input/output vectors, capturing the influence of high-resolution, high-fidelity physics on a host climate simulator's macro-scale state. The dataset is global and spans ten years at a high sampling frequency. We provide a cross-platform, containerized pipeline to integrate ML models into operational climate simulators for hybrid testing. We also implement various ML baselines, alongside a hybrid baseline simulator, to highlight the ML challenges of building stable, skillful emulators. The data (https://huggingface.co/datasets/LEAP/ClimSim_high-res) and code (https://leap-stc.github.io/ClimSim and https://github.com/leap-stc/climsim-online) are publicly released to support the development of hybrid ML-physics and high-fidelity climate simulations. △ Less

Submitted 8 July, 2024; v1 submitted 14 June, 2023; originally announced June 2023.

Comments: This manuscript is an expanded version of our paper that received the Outstanding Paper Award at the NeurIPS 2023 conference

High $βべーた$ magnetic reconnection at different altitudes in the cool low solar atmosphere

Authors: Abdullah Zafar, Lei Ni, Jun Lin, Udo Ziegler

Abstract: We numerically studied magnetic reconnection in a high $βべーた$ hydrogen-helium plasma at different altitudes from the photosphere to the upper chromosphere. The time dependent ionization degrees were included to get more realistic diffusivities and viscosity, and appropriate radiative cooling models were applied. Our numerical results indicate that the plasmoid instability always plays a vital role in… ▽ More We numerically studied magnetic reconnection in a high $βべーた$ hydrogen-helium plasma at different altitudes from the photosphere to the upper chromosphere. The time dependent ionization degrees were included to get more realistic diffusivities and viscosity, and appropriate radiative cooling models were applied. Our numerical results indicate that the plasmoid instability always plays a vital role in speeding up magnetic reconnection at different atmospheric layers. In addition, both the strong radiative cooling and the magnetic diffusion caused by the electron-neutral collision ($ηいーた_{en}$) can significantly accelerate magnetic reconnection below the middle chromosphere. On the other hand, both the ambipolar diffusion and the viscosity result in higher temperature and plasma pressure in the reconnection region in the upper chromosphere, which then hinder the fast reconnection process from developing. The local compression heating triggered by turbulent reconnection mediated with plasmoids is the dominant heating mechanism in the unstable reconnection stage at different atmospheric layers, but the viscous heating and the ambipolar diffusion heating are equally important in the upper chromosphere. The Joule heating contributed by $ηいーた_{en}$ dominates during the early quasi-steady reconnection stage below the middle chromosphere, the strong radiative cooling also leads to much stronger compression heating and more generation of thermal energy in this region. Though the plasma $βべーた$ is the same in all the simulation cases at different altitudes, the temperature increase is more significant in the upper chromosphere with much lower density and weaker radiative cooling. △ Less

Submitted 14 June, 2023; originally announced June 2023.

Learn to Flap: Foil Non-parametric Path Planning via Deep Reinforcement Learning

Authors: Z. P. Wang, R. J. Lin, Z. Y. Zhao, P. M. Guo, N. Yang, D. X. Fan

Abstract: To optimize flapping foil performance, the application of deep reinforcement learning (DRL) on controlling foil non-parametric motion is conducted in the present study. Traditional control techniques and simplified motions cannot fully model nonlinear, unsteady and high-dimensional foil-vortex interactions. A DRL-training framework based on Proximal Policy Optimization and Transformer architecture… ▽ More To optimize flapping foil performance, the application of deep reinforcement learning (DRL) on controlling foil non-parametric motion is conducted in the present study. Traditional control techniques and simplified motions cannot fully model nonlinear, unsteady and high-dimensional foil-vortex interactions. A DRL-training framework based on Proximal Policy Optimization and Transformer architecture is proposed. The policy is initialized from the sinusoidal expert display. We first demonstrate the effectiveness of the proposed DRL-training framework which can optimize foil motion while enhancing foil generated thrust. By adjusting reward setting and action threshold, the DRL-optimized foil trajectories can gain further enhancement compared to sinusoidal motion. Via flow analysis of wake morphology and instantaneous pressure distributions, it is found that the DRL-optimized foil can adaptively adjust the phases between motion and shedding vortices to improve hydrodynamic performance. Our results give a hint for solving complex fluid manipulation problems through DRL method. △ Less

Submitted 25 May, 2023; v1 submitted 21 May, 2023; originally announced May 2023.

Comments: submitted to Journal of Fluid Mechanics rapids

Multi-mode Perturbation Modelling for Cavity Polygon and Star Modes

Authors: Saeed Farajollahi, Zhiwei Fang, Jintian Lin, Shahin Honari, Ya Cheng, Tao Lu

Abstract: Polygon and star modes enable unidirectional emission and single-frequency lasing in whispering gallery microcavities. To understand their properties and facilitate design, we have adopted both two-dimensional and three-dimensional full-wave perturbation methods to simulate these modes. Our simulation demonstrates that a tapered optical fiber can be used as a weak perturbation to coherently combin… ▽ More Polygon and star modes enable unidirectional emission and single-frequency lasing in whispering gallery microcavities. To understand their properties and facilitate design, we have adopted both two-dimensional and three-dimensional full-wave perturbation methods to simulate these modes. Our simulation demonstrates that a tapered optical fiber can be used as a weak perturbation to coherently combine multiple whispering gallery modes into a polygon or star mode. Additionally, our simulation predicts an optical quality factor as high as $10^7$ for the polygon modes, which is in good agreement with the experiment results. △ Less

Submitted 9 May, 2023; originally announced May 2023.

Upwards Tropospheric Influence on Tropical Stratospheric Upwelling

Authors: Jonathan Lin, Kerry Emanuel

Abstract: The steady response of the stratosphere to a sea surface temperature (SST) forcing is considered in two separate theoretical models. It is first shown that anomalies in SST impose a geopotential anomaly at the tropopause. Solutions to the linearized quasi-geostrophic potential vorticity equations are then used to show that the vertical length scale of a tropopause geopotential anomaly is initially… ▽ More The steady response of the stratosphere to a sea surface temperature (SST) forcing is considered in two separate theoretical models. It is first shown that anomalies in SST impose a geopotential anomaly at the tropopause. Solutions to the linearized quasi-geostrophic potential vorticity equations are then used to show that the vertical length scale of a tropopause geopotential anomaly is initially shallow, but significantly increased by diabatic heating from radiative relaxation. This process is a quasi-balanced response of the stratosphere to tropospheric forcing. A previously developed, coupled troposphere-stratosphere model is then introduced and modified. Solutions under steady, zonally-symmetric SST forcing in the linear $βべーた$-plane model show that the upwards stratospheric penetration of the corresponding tropopause geopotential anomaly is controlled by two non-dimensional parameters, (1) a dynamical aspect ratio, and (2) a ratio between tropospheric and stratospheric drag. The meridional scale of the SST anomaly, radiative relaxation rate, and wave-drag all significantly modulate these non-dimensional parameters. Under Earth-like estimates of the non-dimensional parameters, the theoretical model predicts stratospheric temperature anomalies 2-3 larger in magnitude than that in the boundary layer, approximately in line with observational data. Using reanalysis data, the spatial variability of temperature anomalies in the troposphere is shown to have remarkable coherence with that of the lower-stratosphere, which further supports the existence of a quasi-balanced response of the stratosphere to SST forcing. These findings suggest that besides mechanical and thermal forcing, there is a third way the stratosphere can be forced -- through the tropopause. △ Less

Submitted 7 September, 2023; v1 submitted 1 May, 2023; originally announced May 2023.

Hybrid plasmonic modes for enhanced refractive index sensing

Authors: Bereket Dalga Dana, Ji Boyu, Jingquan Lin, Longnan Li, Alemayehu Nana Koya, Wei Li

Abstract: Compared to single nanoparticles, strongly coupled plasmonic nanoparticles provide attractive advantages owing to their ability to exhibit multiple resonances with unique spectral features and higher local field intensity. These enhanced plasmonic properties of coupled metal nanoparticles have been used for various applications including realization of strong light-matter interaction, photocatalys… ▽ More Compared to single nanoparticles, strongly coupled plasmonic nanoparticles provide attractive advantages owing to their ability to exhibit multiple resonances with unique spectral features and higher local field intensity. These enhanced plasmonic properties of coupled metal nanoparticles have been used for various applications including realization of strong light-matter interaction, photocatalysis, and sensing applications. In this article, we review the basic physics of hybrid plasmonic modes in coupled metallic nanodimers and assess their potentials for refractive index sensing. In particular, we overview various modes of hybrid plasmons including bonding and antibonding modes in symmetric nanodimers, Fano resonances in asymmetric nanodimers, charge transfer plasmons in linked nanoparticle dimers, hybrid plasmon modes in nanoshells, and gap modes in particle-on-mirror configurations. Beyond the dimeric nanosystems, we also showcase the potentials of hybrid plasmonic modes in periodic nanoparticle arrays for sensing applications. Finally, based on the critical assessment of the recent researches on coupled plasmonic modes, the outlook on the future prospects of hybrid plasmon based refractometric sensing are discussed We believe that, given their tunable resonances and ultranarrow spectral signatures, coupled metal nanoparticles are expected to play key roles in developing precise plasmonic nanodevices with extreme sensitivity. △ Less

Submitted 19 April, 2023; originally announced April 2023.

Microwave shielding of bosonic NaRb molecules

Authors: Junyu Lin, Guanghua Chen, Mucan Jin, Zhaopeng Shi, Fulin Deng, Wenxian Zhang, Goulven Quéméner, Tao Shi, Su Yi, Dajun Wang

Abstract: Recent years have witnessed tremendous progresses in creating and manipulating ground-state ultracold polar molecules. However, the two-body loss regardless of the chemical reactivities is still a hurdle for many future explorations. Here, we investigate the loss suppression of non-reactive bosonic $^{23}$Na$^{87}$Rb molecules with a circular polarized microwave blue-detuned to the rotational tran… ▽ More Recent years have witnessed tremendous progresses in creating and manipulating ground-state ultracold polar molecules. However, the two-body loss regardless of the chemical reactivities is still a hurdle for many future explorations. Here, we investigate the loss suppression of non-reactive bosonic $^{23}$Na$^{87}$Rb molecules with a circular polarized microwave blue-detuned to the rotational transition. We achieve suppression of the loss by two orders of magnitude with the lowest two-body loss rate coefficient reduced to $3\times10^{-12}~\rm{cm^3/s}$. Meanwhile, the elastic collision rate coefficient is increased to the $10^{-8}~\rm{cm^3/s}$ level. The large good-to-bad collision ratio has allowed us to carry out evaporative cooling of $^{23}$Na$^{87}$Rb with an efficiency of 1.7(2), increasing the phase-space density by a factor of 10. With further improvements, this technique holds great promises for creating a Bose-Einstein condensate of ultracold polar molecules. △ Less

Submitted 30 April, 2023; v1 submitted 17 April, 2023; originally announced April 2023.

Comments: 11 pages, 8 figures. Figure 3(c) is updated based on the calculation in Appendix D2. The 1st version was submitted on 17 Apr 2023

Journal ref: Phys. Rev. X 13, 031032 (2023)

Scientific Machine Learning Framework to Understand Flash Graphene Synthesis

Authors: Kianoosh Sattari, Lucas Eddy, Jacob L. Beckham, Kevin M. Wyss, Richard Byfield, Long Qian, James M. Tour, Jian Lin

Abstract: Flash Joule heating (FJH) is a far-from-equilibrium (FFE) processing method for converting low-value carbon-based materials to flash graphene (FG). Despite its promise in scalability and performance, attempts to explore the reaction mechanism have been limited due to complexity involved in the FFE process. Data-driven machine learning (ML) models effectively account for this complexity, but the mo… ▽ More Flash Joule heating (FJH) is a far-from-equilibrium (FFE) processing method for converting low-value carbon-based materials to flash graphene (FG). Despite its promise in scalability and performance, attempts to explore the reaction mechanism have been limited due to complexity involved in the FFE process. Data-driven machine learning (ML) models effectively account for this complexity, but the model training requires considerable amount of experimental data. To tackle this challenge, we constructed a scientific ML (SML) framework trained by using both direct processing variables and indirect, physics-informed variables to predict the FG yield. The indirect variables include current-derived features (final current, maximum current, and charge density) predicted from the proxy ML models and reaction temperatures simulated from multi-physics modeling. With the combined indirect features, the final ML model achieves an average R2 score of 0.81 +/- 0.05 and an average RMSE of 12.1% +/- 2.0% in predicting the FG yield, which is significantly higher than the model trained without them (R2 of 0.73 +/- 0.05 and an RMSE of 14.3% +/- 2.0%). Feature importance analysis validates the key roles of these indirect features in determining the reaction outcome. These results illustrate the promise of this SML to elucidate FFE material synthesis outcomes, thus paving a new avenue to processing other datasets from the materials systems involving the same or different FFE processes. △ Less

Submitted 22 March, 2023; originally announced March 2023.

Tomography Scan of Charge Density Wave in NbSe2

Authors: Jyun-Yu Wu, Yung-Ting Lee, Guan-Hao Chen, Zheng-Hong Li, Chang-Tsan Lee, Jie-Yu Hsu, Chia-Nung Kuo, Juhn-Jong Lin, Wen-Hao Chang, Chin-Shan Lue, Po-Tuan Cheng, Cheng-Tien Chiang, Chien-Cheng Kuo, Chien-Te Wu, Chi-Cheng Lee, Ming-Chiang Chung, Hung-Chung Hsueh, Chun-Liang Lin

Abstract: Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized.… ▽ More Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized. Here by using scanning tunneling microscopy (STM) and density functional theory (DFT), we have monitored the evolution of 3x3 CDW along c-axis and realized a nearly tomography scan of CDW of the topmost layer. The results show that the strength of 3x3 charge order varies while increasing the tunneling current. The 3x3 charge order is relatively strong at the outermost Se level and decreases while probing in between Se and Nb levels. Interestingly, the 3x3 charge order gets strong again as reaching Nb level but along with a phase shift. We further calculated the orbital charge distributions and found that both CDW intensity modulation and phase shift are strongly correlated with the distribution of Se p orbitals and Nb d orbitals. △ Less

Submitted 21 March, 2023; originally announced March 2023.

Comments: 12 pages, 4 figures