-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Rapid Parameter Estimation for Merging Massive Black Hole Binaries Using ODE-Based Generative Models
Authors:
Bo Liang,
Minghui Du,
He Wang,
Yuxiang Xu,
Chang Liu,
Xiaotong Wei,
Peng Xu,
Li-e Qiang,
Ziren Luo
Abstract:
Detecting the coalescences of massive black hole binaries (MBHBs) is one of the primary targets for space-based gravitational wave observatories such as LISA, Taiji, and Tianqin. The fast and accurate parameter estimation of merging MBHBs is of great significance for both astrophysics and the global fitting of all resolvable sources. However, such analyses entail significant computational costs. T…
▽ More
Detecting the coalescences of massive black hole binaries (MBHBs) is one of the primary targets for space-based gravitational wave observatories such as LISA, Taiji, and Tianqin. The fast and accurate parameter estimation of merging MBHBs is of great significance for both astrophysics and the global fitting of all resolvable sources. However, such analyses entail significant computational costs. To address these challenges, inspired by the latest progress in generative models, we proposed a novel artificial intelligence (AI) based parameter estimation method called Variance Preserving Flow Matching Posterior Estimation (VPFMPE). Specifically, we utilize triangular interpolation to maintain variance over time, thereby constructing a transport path for training continuous normalization flows. Compared to the simple linear interpolation method used in flow matching to construct the optimal transport path, our approach better captures continuous temporal variations, making it more suitable for the parameter estimation of MBHBs. Additionally, we creatively introduce a parameter transformation method based on the symmetry in the detector's response function. This transformation is integrated within VPFMPE, allowing us to train the model using a simplified dataset, and then perform parameter estimation on more general data, hence also acting as a crucial factor in improving the training speed. In conclusion, for the first time, within a comprehensive and reasonable parameter range, we have achieved a complete and unbiased 11-dimensional rapid inference for MBHBs in the presence of astrophysical confusion noise using ODE-based generative models. In the experiments based on simulated data, our model produces posterior distributions comparable to those obtained by nested sampling.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
On-chip high energy photon radiation source based on microwave-dielectric undulator
Authors:
Fuming Jiang,
Xinyu Xie,
Chengpu Liu,
Ye Tian
Abstract:
A new on-chip light source configuration has been proposed, which utilizes the interaction between microwave and a dielectric nanopillar array to generate a periodic electromagnetic near field, and applies periodic transverse acceleration to relativistic electrons to generate high-energy photon radiation. Here the dielectric nanopillar array interacting with microwave acts as the electron undulato…
▽ More
A new on-chip light source configuration has been proposed, which utilizes the interaction between microwave and a dielectric nanopillar array to generate a periodic electromagnetic near field, and applies periodic transverse acceleration to relativistic electrons to generate high-energy photon radiation. Here the dielectric nanopillar array interacting with microwave acts as the electron undulator, in which the near field drives electrons to oscillate. When an electron beam operates in this nanopillar array in this light source configuration, it is subjected to a periodic transverse near-field force, and will radiate X-ray or even gamma-ray high energy photons after a relativistic frequency up-conversion. Compared with the laser-dielectric undulator based on the interaction between strong lasers and nanostructures to generate a plasmonic near field, this configuration is less prone to damage during operation.
△ Less
Submitted 29 June, 2024;
originally announced July 2024.
-
Anatomizing Societal Recovery at the Microscale: Heterogeneity in Household Lifestyle Activities Rebounding after Disasters
Authors:
Natalie Coleman,
Chenyue Liu,
Ali Mostafavi
Abstract:
This study presents a granular analysis of societal recovery from disasters at the individual level, focusing on the aftermath of Hurricane Harvey and Hurricane Ida. Societal recovery is defined as the restoration of the societal functioning of the affected community to its normal/steady-state level. It evaluates the recovery of impacted residents based on fluctuations in their lifestyle patterns…
▽ More
This study presents a granular analysis of societal recovery from disasters at the individual level, focusing on the aftermath of Hurricane Harvey and Hurricane Ida. Societal recovery is defined as the restoration of the societal functioning of the affected community to its normal/steady-state level. It evaluates the recovery of impacted residents based on fluctuations in their lifestyle patterns in visits to points of interest. The analysis focuses on: (1) the extent of heterogeneity in lifestyle recovery of residents in the same spatial area; and (2) the extent to which variations in lifestyle recovery and its heterogeneity among users can be explained based on hazard impact extent and social vulnerability. As lifestyle recovery progresses, heterogeneity diminishes, indicating that lower lifestyle recovery rates correlate with higher heterogeneity within a spatial area. This relationship between lifestyle recovery and heterogeneity can lead to the misestimation of recovery timelines, potentially resulting in the inefficient allocation of resources and disproportionate attention to already recovering communities. Key contributions of the study are fourfold: First, it characterizes societal recovery at the finest scale by examining fluctuations in individual lifestyles, revealing heterogeneity even among neighbors. Second, it proposes using individual lifestyle as an indicator of societal functioning to measure, more human centrically, disaster impacts and recovery speeds. Third, it introduces a method for quantifying lifestyle recovery that enables near-real-time monitoring, departing from traditional survey-based methods. Fourth, it provides empirical insights into the relationship between disaster impacts and societal recovery, showing that the severity of disaster impacts and resident income levels and percentage of minority populations influence recovery durations.
△ Less
Submitted 27 June, 2024; v1 submitted 25 June, 2024;
originally announced June 2024.
-
Development of RFSoC-based direct sampling highly multiplexed microwave SQUID readout for future CMB and submillimeter surveys
Authors:
Chao Liu,
Zeeshan Ahmed,
Shawn W. Henderson,
Ryan Herbst,
Larry Ruckman,
Thomas Satterthwaite
Abstract:
The SLAC Microresonator Radio Frequency (SMuRF) electronics is being deployed as the readout for the Cosmic Microwave Background (CMB) telescopes of the Simons Observatory (SO). A Radio Frequency System-on-Chip (RFSoC) based readout of microwave frequency resonator based cryogenic sensors is under development at SLAC as an upgrade path for SMuRF with simplified RF hardware, a more compact footprin…
▽ More
The SLAC Microresonator Radio Frequency (SMuRF) electronics is being deployed as the readout for the Cosmic Microwave Background (CMB) telescopes of the Simons Observatory (SO). A Radio Frequency System-on-Chip (RFSoC) based readout of microwave frequency resonator based cryogenic sensors is under development at SLAC as an upgrade path for SMuRF with simplified RF hardware, a more compact footprint, and lower total power consumption. The high-speed integrated data converters and digital data path in RFSoC enable direct RF sampling without analog up and down conversion for RF frequencies up to 6 GHz. A comprehensive optimization and characterization study has been performed for direct RF sampling for microwave SQUID multiplexers, which covers noise level, RF dynamic range, and linearity using a prototype implementation. The SMuRF firmware, including the implementation of closed-loop tone tracking, has been ported to the RFSoC platform and interfaced with the quadrature mixers for digital up and down conversion in the data converter data path to realize a full microwave SQUID multiplexer readout. In this paper, a selection of the performance characterization results of direct RF sampling for microwave SQUID multiplexer readout will be summarized and compared with science-driven requirements. Preliminary results demonstrating the read out of cryogenic sensors using the prototype system will also be presented here. We anticipate our new RFSoC-based SMuRF system will be an enabling readout for on-going and future experiments in astronomy and cosmology, which rely on large arrays of cryogenic sensors to achieve their science goals.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Beam test results of the prototype of the multi wire drift chamber for the CSR external-target experiment
Authors:
Zhi Qin,
Zhoubo He,
Zhe Cao,
Tao Chen,
Zhi Deng,
Limin Duan,
Dong Guo,
Rongjiang Hu,
Jie Kong,
Canwen Liu,
Peng Ma,
Xianglun Wei,
Shihai Wen,
Xiangjie Wen,
Junwei Yan,
Herun Yang,
Zuoqiao Yang,
Yuhong Yu,
Zhigang Xiao
Abstract:
The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with…
▽ More
The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with respect to the vertical axis, respectively. The sensitive area of the prototype is $76 {\rm cm} \times 76 {\rm cm}$. The amplified and shaped signals from the anode wires are digitized in a serial capacity array. Being operated with 1500 V high voltage on the anode wires, the efficiency for each layer is beyond 95\%. The tracking residual is about $301 \pm 2 \rm μm$. The performance meets the requirements of CEE.
△ Less
Submitted 15 May, 2024;
originally announced June 2024.
-
ESND: An Embedding-based Framework for Signed Network Dismantling
Authors:
Chenwei Xie,
Chuang Liu,
Cong Li,
Xiu-Xiu Zhan,
Xiang Li
Abstract:
Network dismantling aims to maximize the disintegration of a network by removing a specific set of nodes or edges and is applied to various tasks in diverse domains, such as cracking down on crime organizations, delaying the propagation of rumors, and blocking the transmission of viruses. Most of the current network dismantling methods are tailored for unsigned networks, which only consider the co…
▽ More
Network dismantling aims to maximize the disintegration of a network by removing a specific set of nodes or edges and is applied to various tasks in diverse domains, such as cracking down on crime organizations, delaying the propagation of rumors, and blocking the transmission of viruses. Most of the current network dismantling methods are tailored for unsigned networks, which only consider the connection between nodes without evaluating the nature of the relationships, such as friendship/hostility, enhancing/repressing, and trust/distrust. We here propose an embedding-based algorithm, namely ESND, to solve the signed network dismantling problem. The algorithm generally iterates the following four steps, i.e., giant component detection, network embedding, node clustering, and removal node selection. To illustrate the efficacy and stability of ESND, we conduct extensive experiments on six signed network datasets as well as null models, and compare the performance of our method with baselines. Experimental results consistently show that the proposed ESND is superior to the baselines and displays stable performance with the change in the network structure. Additionally, we examine the impact of sign proportions on network robustness via ESND, observing that networks with a high ratio of negative edges are generally easier to dismantle than networks with high positive edges.
△ Less
Submitted 21 June, 2024; v1 submitted 13 June, 2024;
originally announced June 2024.
-
RGFN: Synthesizable Molecular Generation Using GFlowNets
Authors:
Michał Koziarski,
Andrei Rekesh,
Dmytro Shevchuk,
Almer van der Sloot,
Piotr Gaiński,
Yoshua Bengio,
Cheng-Hao Liu,
Mike Tyers,
Robert A. Batey
Abstract:
Generative models hold great promise for small molecule discovery, significantly increasing the size of search space compared to traditional in silico screening libraries. However, most existing machine learning methods for small molecule generation suffer from poor synthesizability of candidate compounds, making experimental validation difficult. In this paper we propose Reaction-GFlowNet (RGFN),…
▽ More
Generative models hold great promise for small molecule discovery, significantly increasing the size of search space compared to traditional in silico screening libraries. However, most existing machine learning methods for small molecule generation suffer from poor synthesizability of candidate compounds, making experimental validation difficult. In this paper we propose Reaction-GFlowNet (RGFN), an extension of the GFlowNet framework that operates directly in the space of chemical reactions, thereby allowing out-of-the-box synthesizability while maintaining comparable quality of generated candidates. We demonstrate that with the proposed set of reactions and building blocks, it is possible to obtain a search space of molecules orders of magnitude larger than existing screening libraries coupled with low cost of synthesis. We also show that the approach scales to very large fragment libraries, further increasing the number of potential molecules. We demonstrate the effectiveness of the proposed approach across a range of oracle models, including pretrained proxy models and GPU-accelerated docking.
△ Less
Submitted 1 June, 2024;
originally announced June 2024.
-
Nuclear Medicine Artificial Intelligence in Action: The Bethesda Report (AI Summit 2024)
Authors:
Arman Rahmim,
Tyler J. Bradshaw,
Guido Davidzon,
Joyita Dutta,
Georges El Fakhri,
Munir Ghesani,
Nicolas A. Karakatsanis,
Quanzheng Li,
Chi Liu,
Emilie Roncali,
Babak Saboury,
Tahir Yusufaly,
Abhinav K. Jha
Abstract:
The 2nd SNMMI Artificial Intelligence (AI) Summit, organized by the SNMMI AI Task Force, took place in Bethesda, MD, on February 29 - March 1, 2024. Bringing together various community members and stakeholders, and following up on a prior successful 2022 AI Summit, the summit theme was: AI in Action. Six key topics included (i) an overview of prior and ongoing efforts by the AI task force, (ii) em…
▽ More
The 2nd SNMMI Artificial Intelligence (AI) Summit, organized by the SNMMI AI Task Force, took place in Bethesda, MD, on February 29 - March 1, 2024. Bringing together various community members and stakeholders, and following up on a prior successful 2022 AI Summit, the summit theme was: AI in Action. Six key topics included (i) an overview of prior and ongoing efforts by the AI task force, (ii) emerging needs and tools for computational nuclear oncology, (iii) new frontiers in large language and generative models, (iv) defining the value proposition for the use of AI in nuclear medicine, (v) open science including efforts for data and model repositories, and (vi) issues of reimbursement and funding. The primary efforts, findings, challenges, and next steps are summarized in this manuscript.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Electric-Field Control of Magnetic Skyrmion Chirality in a Centrosymmetric 2D van der Waals Magnet
Authors:
Myung-Geun Han,
Joachim Dahl Thomsen,
John P. Philbin,
Junsik Mun,
Eugene Park,
Fernando Camino,
Lukáš Děkanovský,
Chuhang Liu,
Zdenek Sofer,
Prineha Narang,
Frances M. Ross,
Yimei Zhu
Abstract:
Two-dimensional van der Waals magnets hosting topological magnetic textures, such as skyrmions, show promise for applications in spintronics and quantum computing. Electrical control of these topological spin textures would enable novel devices with enhanced performance and functionality. Here, using electron microscopy combined with in situ electric and magnetic biasing, we show that the skyrmion…
▽ More
Two-dimensional van der Waals magnets hosting topological magnetic textures, such as skyrmions, show promise for applications in spintronics and quantum computing. Electrical control of these topological spin textures would enable novel devices with enhanced performance and functionality. Here, using electron microscopy combined with in situ electric and magnetic biasing, we show that the skyrmion chirality, whether left-handed or right-handed, in insulating Cr2Ge2Te6, is controlled by external electric field direction applied during magnetic field cooling process. The electric-field-tuned chirality remains stable, even amid variations in magnetic and electric fields. Our theoretical investigation reveals that nonzero Dzyaloshinskii-Moriya interactions between the nearest neighbors, induced by the external electric field, change their sign upon reversing the electric field direction, thereby facilitating chirality selection. The electrical control of magnetic chirality demonstrated in this study can be extended to other non-metallic centrosymmetric skyrmion-hosting magnets, opening avenues for future device designs in topological spintronics and quantum computing.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
Assessment of different head tilt angles in volumetric modulated arc therapy for hippocampus-avoidance whole-brain radiotherapy
Authors:
Cuiyun Yuan,
Sisi Xu,
Yang Li,
Enzhuo Quan,
Dongjie Chen,
Jun Liang,
Chenbin Liu
Abstract:
Purpose: We aims to examine the impact of different head tilt angles on the dose distribution in the whole-brain target area and organs at risk. It also aims to determine the head tilt angle to achieve optimal radiation therapy outcomes. Methods: CT images were collected from 8 brain metastases patients at 5 different groups of head tilt angle. The treatment plans were designed using the volumetri…
▽ More
Purpose: We aims to examine the impact of different head tilt angles on the dose distribution in the whole-brain target area and organs at risk. It also aims to determine the head tilt angle to achieve optimal radiation therapy outcomes. Methods: CT images were collected from 8 brain metastases patients at 5 different groups of head tilt angle. The treatment plans were designed using the volumetric modulated arc therapy (VMAT) technique. The 5 groups of tilt angle were as follows: [0,10), [10,20), [20,30), [30,40), and [40,45]. The analysis involved assessing parameters such as the uniformity index, conformity index, average dose delivered to the target, dose coverage of the target, hot spots within the target area, maximum dose, and average dose received by organs at risk. Additionally, the study evaluated the correlation between hippocampal dose and other factors and established linear regression models. Results: Significant differences in dosimetric results were observed between the [40,45] and [0,10) head tilt angles. The [40,45] angle showed significant differences compared to the [0,10) angle in the average dose in the target area, dose uniformity, hotspots in the target area, maximum hippocampal dose, maximum dose in the lens, and average dose in the lens. There is a moderate correlation between the maximum dose in the hippocampi and the PTV length. Likewise, the mean dose in the hippocampi is significantly correlated with the hippocampi length. Conclusion: The VMAT plan with a head tilt angle of [40,45] met all dose constraints and demonstrated improved uniformity of the target area while reducing the dose to organs at risk. Furthermore, the linear regression models suggest that increasing the head tilt angle within the current range of [0,45] is likely to lead to a decrease in the average hippocampal dose.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
A generative model for community types in directed networks
Authors:
Cathy Xuanchi Liu,
Tristram J. Alexander,
Eduardo G. Altmann
Abstract:
Large complex networks are often organized into groups or communities. In this paper, we introduce and investigate a generative model of network evolution that reproduces all four pairwise community types that exist in directed networks: assortative, core-periphery, disassortative, and the newly introduced source-basin type. We fix the number of nodes and the community membership of each node, all…
▽ More
Large complex networks are often organized into groups or communities. In this paper, we introduce and investigate a generative model of network evolution that reproduces all four pairwise community types that exist in directed networks: assortative, core-periphery, disassortative, and the newly introduced source-basin type. We fix the number of nodes and the community membership of each node, allowing node connectivity to change through rewiring mechanisms that depend on the community membership of the involved nodes. We determine the dependence of the community relationship on the model parameters using a mean-field solution. It reveals that a difference in the swap probabilities of the two communities is a necessary condition to obtain a core-periphery relationship and that a difference in the average in-degree of the communities is a necessary condition for a source-basin relationship. More generally, our analysis reveals multiple possible scenarios for the transition between the different structure types, and sheds light on the mechanisms underlying the observation of the different types of communities in network data.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Quality assurance of organs-at-risk delineation in radiotherapy
Authors:
Yihao Zhao,
Cuiyun Yuan,
Ying Liang,
Yang Li,
Chunxia Li,
Man Zhao,
Jun Hu,
Wei Liu,
Chenbin Liu
Abstract:
The delineation of tumor target and organs-at-risk is critical in the radiotherapy treatment planning. Automatic segmentation can be used to reduce the physician workload and improve the consistency. However, the quality assurance of the automatic segmentation is still an unmet need in clinical practice. The patient data used in our study was a standardized dataset from AAPM Thoracic Auto-Segmenta…
▽ More
The delineation of tumor target and organs-at-risk is critical in the radiotherapy treatment planning. Automatic segmentation can be used to reduce the physician workload and improve the consistency. However, the quality assurance of the automatic segmentation is still an unmet need in clinical practice. The patient data used in our study was a standardized dataset from AAPM Thoracic Auto-Segmentation Challenge. The OARs included were left and right lungs, heart, esophagus, and spinal cord. Two groups of OARs were generated, the benchmark dataset manually contoured by experienced physicians and the test dataset automatically created using a software AccuContour. A resnet-152 network was performed as feature extractor, and one-class support vector classifier was used to determine the high or low quality. We evaluate the model performance with balanced accuracy, F-score, sensitivity, specificity and the area under the receiving operator characteristic curve. We randomly generated contour errors to assess the generalization of our method, explored the detection limit, and evaluated the correlations between detection limit and various metrics such as volume, Dice similarity coefficient, Hausdorff distance, and mean surface distance. The proposed one-class classifier outperformed in metrics such as balanced accuracy, AUC, and others. The proposed method showed significant improvement over binary classifiers in handling various types of errors. Our proposed model, which introduces residual network and attention mechanism in the one-class classification framework, was able to detect the various types of OAR contour errors with high accuracy. The proposed method can significantly reduce the burden of physician review for contour delineation.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Scalable single-microring hybrid III-V/Si lasers for emerging narrow-linewidth applications
Authors:
Jiawei Wang,
Xiang Li,
Xin Guo,
Ter-Hoe Loh,
Luigi Ranno,
Chongyang Liu,
Rusli,
Hong Wang,
Jia Xu Brian Sia
Abstract:
Silicon photonics, compatible with large-scale silicon manufacturing, is a disruptive photonic platform that has indicated significant implications in industry and research areas (e.g., quantum, neuromorphic computing, LiDAR). Cutting-edge applications such as high-capacity coherent optical communication and heterodyne LiDAR have escalated the demand for integrated narrow-linewidth laser sources.…
▽ More
Silicon photonics, compatible with large-scale silicon manufacturing, is a disruptive photonic platform that has indicated significant implications in industry and research areas (e.g., quantum, neuromorphic computing, LiDAR). Cutting-edge applications such as high-capacity coherent optical communication and heterodyne LiDAR have escalated the demand for integrated narrow-linewidth laser sources. To that effect, this work seeks to address this requirement through the development of a high-performance hybrid III-V/silicon laser. The developed integrated laser, utilizes a single microring resonator (MRR), demonstrating single-mode operation with a side mode suppression ratio (SMSR) exceeding 40 dB, with laser output power as high as 16.4 mW. Moving away from current hybrid/heterogeneous laser architectures that necessitate multiple complex control, the developed laser architecture requires only two control parameters. Importantly, this serves to streamline industrial adoption by reducing the complexity involved in characterizing these lasers, at-scale. Through the succinct structure and control framework, a narrow laser linewidth of 2.79 kHz and low relative intensity noise (RIN) of -135 dB/Hz are achieved. Furthermore, optical data transmission at 12.5 Gb/s is demonstrated where a signal-to-noise ratio (SNR) of 10 dB is measured.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Direct RF Sampling based LLRF Control System for C-band Linear Accelerator
Authors:
C. Liu,
R. Herbst,
B. Hong,
L. Ruckman,
E. A. Nanni
Abstract:
Low Level RF (LLRF) control systems of linear accelerators (LINACs) are typically implemented with heterodyne based architectures, which have complex analog RF mixers for up and down conversion. The Gen 3 Radio Frequency System-on-Chip (RFSoC) device from AMD Xilinx integrates data converters with maximum RF frequency of 6~GHz. This enables direct RF sampling of C-band LLRF signal typically operat…
▽ More
Low Level RF (LLRF) control systems of linear accelerators (LINACs) are typically implemented with heterodyne based architectures, which have complex analog RF mixers for up and down conversion. The Gen 3 Radio Frequency System-on-Chip (RFSoC) device from AMD Xilinx integrates data converters with maximum RF frequency of 6~GHz. This enables direct RF sampling of C-band LLRF signal typically operated at 5.712 GHz without any analogue mixers, which can significantly simplify the system architecture. The data converters sample RF signals in higher order Nyquist zones and then up or down convert digitally by the integrated data path in RFSoC. The closed-loop feedback control firmware implemented in FPGA integrated in RFSoC can process the base-band signal from the ADC data path and calculate the updated phase and amplitude to be up-mixed by the DAC data path. We have developed a C-band LLRF control RFSoC platform with direct RF sampling, which targets Cool Copper Collider (C3) and other C or S band LINAC research and development projects. In this paper, the architecture of the platform will be described. We have optimized the configuration of the data converter and characterized performance of them with RF pulses. The test results for some of the key performance parameters for the LLRF platform with our custom solid-state amplifier, such as phase and amplitude stability, will be discussed in this paper.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Room temperature Si:S barrier infrared detector with broadband response up to 4.4μm
Authors:
He Zhu,
Yunlong Xiao,
Zhongyang Yu,
Jiaqi Zhu,
Qing Li,
Zhenyu Ye,
Xi Wang,
Changlong Liu,
Changyu Pan,
Yufeng Shan,
Junli Duan,
Huizhen Wu,
Weida Hu,
Ning Dai
Abstract:
Mid-infrared spectrum is a critical tool for chemical analysis, industrial inspection, environment, and other fields due to its rich chemical bond information. However, the complicated growth or fabrication procedures of existing mid-infrared sensitive materials hinder the large-scale production and utilization of mid-infrared detectors. To address this issue, we developed Si:S barrier detectors e…
▽ More
Mid-infrared spectrum is a critical tool for chemical analysis, industrial inspection, environment, and other fields due to its rich chemical bond information. However, the complicated growth or fabrication procedures of existing mid-infrared sensitive materials hinder the large-scale production and utilization of mid-infrared detectors. To address this issue, we developed Si:S barrier detectors employing sulfur doped silicon and a sophisticated band barrier design. Since the transport of dark current and photo current is separated, the barrier design effectively suppresses the dark current while allowing the photo current to leverage gain mechanisms, thereby substantially improving signal-to-noise ratio. As a result, the detector exhibits an infrared response range covering from 1.12 to 4.4μm with a peak at 3.3μm, excluding its intrinsic response in visible range. Its peak quantum efficiency surpasses that of the best mid-infrared silicon-based detector reported to date by an order of magnitude, reaching 2% at room temperature. The peak detectivity at 90K is 1.4E11 Jones @1.4V and decreases to 4.4E9 Jones @1.4V, 210K, comparable to the typical III-V and IV-VI photodetectors at one thousandth fabrication cost. Leveraging the well-established silicon-based manufacturing process, this device holds promise for large-scale production at a reduced price, offering a cost-effective solution for future mid-infrared detection.
△ Less
Submitted 7 May, 2024; v1 submitted 4 May, 2024;
originally announced May 2024.
-
YAP:Ce scintillator as an absolute ultracold neutron detector
Authors:
M. Krivoš,
Z. Tang,
N. Floyd,
C. L. Morris,
M. Blatnik,
C. Cude-Woods,
S. M. Clayton,
A. T. Holley,
T. M. Ito,
C. -Y. Liu,
M. Makela,
I. F. Martinez,
A. S. C. Navazo,
C. M. O'Shaughnessy,
E. L. Renner,
R. W. Pattie,
A. R. Young
Abstract:
The upcoming UCNProBe experiment at Los Alamos National Laboratory will measure the $β$-decay rate of free neutrons with different systematic uncertainties than previous beam-based neutron lifetime experiments. We have developed a new $^{10}$B-coated YAP:Ce scintillator whose properties are presented. The advantage of the YAP:Ce scintillator is its high Fermi potential, which reduces the probabili…
▽ More
The upcoming UCNProBe experiment at Los Alamos National Laboratory will measure the $β$-decay rate of free neutrons with different systematic uncertainties than previous beam-based neutron lifetime experiments. We have developed a new $^{10}$B-coated YAP:Ce scintillator whose properties are presented. The advantage of the YAP:Ce scintillator is its high Fermi potential, which reduces the probability for upscattering of ultracold neutrons, and its short decay time, which is important at high counting rates. Birks' coefficient of YAP:Ce was measured to be ($5.56^{+0.05}_{-0.30})\times 10^{-4}$ cm/MeV and light losses due to 120 nm of $^{10}$B-coating to be about 60%. The loss of light from YAP:Ce due to transmission through deuterated polystyrene scintillator was about 50%. The efficiency for counting neutrons that are captured on the $^{10}$B coating is (86.82 $\pm$ 2.61)%. Measurement with ultracold neutrons showed that YAP:Ce crystal counted 8% to 28% more UCNs compared to ZnS screen. This may be due to an uneven coating of $^{10}$B on the rough surface.
△ Less
Submitted 27 March, 2024;
originally announced May 2024.
-
ETROC1: The First Full Chain Precision Timing Prototype ASIC for CMS MTD Endcap Timing Layer Upgrade
Authors:
Xing Huang,
Quan Sun,
Datao Gong,
Piljun Gwak,
Doyeong Kim,
Jongho Lee,
Chonghan Liu,
Tiankuan Liu,
Tiehui Liu,
Sergey Los,
Sandeep Miryala,
Shirsendu Nanda,
Jamieson Olsen,
Hanhan Sun,
Jinyuan Wu,
Jingbo Ye,
Zhenyu Ye,
Li Zhang,
Wei Zhang
Abstract:
We present the design and characterization of the first full chain precision timing prototype ASIC, named ETL Readout Chip version 1 (ETROC1) for the CMS MTD endcap timing layer (ETL) upgrade. The ETL utilizes Low Gain Avalanche Diode (LGAD) sensors to detect charged particles, with the goal to achieve a time resolution of 40 - 50 ps per hit, and 30 - 40 ps per track with hits from two detector la…
▽ More
We present the design and characterization of the first full chain precision timing prototype ASIC, named ETL Readout Chip version 1 (ETROC1) for the CMS MTD endcap timing layer (ETL) upgrade. The ETL utilizes Low Gain Avalanche Diode (LGAD) sensors to detect charged particles, with the goal to achieve a time resolution of 40 - 50 ps per hit, and 30 - 40 ps per track with hits from two detector layers. The ETROC1 is composed of a 5 x 5 pixel array and peripheral circuits. The pixel array includes a 4 x 4 active pixel array with an H-tree shaped network delivering clock and charge injection signals. Each active pixel is composed of various components, including a bump pad, a charge injection circuit, a pre-amplifier, a discriminator, a digital-to-analog converter, and a time-to-digital converter. These components play essential roles as the front-end link in processing LGAD signals and measuring timing-related information. The peripheral circuits provide clock signals and readout functionalities. The size of the ETROC1 chip is 7 mm x 9 mm. ETROC1 has been fabricated in a 65 nm CMOS process, and extensively tested under stimuli of charge injection, infrared laser, and proton beam. The time resolution of bump-bonded ETROC1 + LGAD chipsets reaches 42 - 46 ps per hit in the beam test.
△ Less
Submitted 25 April, 2024; v1 submitted 22 April, 2024;
originally announced April 2024.
-
Image Reconstruction with B0 Inhomogeneity using an Interpretable Deep Unrolled Network on an Open-bore MRI-Linac
Authors:
Shanshan Shan,
Yang Gao,
David E. J. Waddington,
Hongli Chen,
Brendan Whelan,
Paul Z. Y. Liu,
Yaohui Wang,
Chunyi Liu,
Hongping Gan,
Mingyuan Gao,
Feng Liu
Abstract:
MRI-Linac systems require fast image reconstruction with high geometric fidelity to localize and track tumours for radiotherapy treatments. However, B0 field inhomogeneity distortions and slow MR acquisition potentially limit the quality of the image guidance and tumour treatments. In this study, we develop an interpretable unrolled network, referred to as RebinNet, to reconstruct distortion-free…
▽ More
MRI-Linac systems require fast image reconstruction with high geometric fidelity to localize and track tumours for radiotherapy treatments. However, B0 field inhomogeneity distortions and slow MR acquisition potentially limit the quality of the image guidance and tumour treatments. In this study, we develop an interpretable unrolled network, referred to as RebinNet, to reconstruct distortion-free images from B0 inhomogeneity-corrupted k-space for fast MRI-guided radiotherapy applications. RebinNet includes convolutional neural network (CNN) blocks to perform image regularizations and nonuniform fast Fourier Transform (NUFFT) modules to incorporate B0 inhomogeneity information. The RebinNet was trained on a publicly available MR dataset from eleven healthy volunteers for both fully sampled and subsampled acquisitions. Grid phantom and human brain images acquired from an open-bore 1T MRI-Linac scanner were used to evaluate the performance of the proposed network. The RebinNet was compared with the conventional regularization algorithm and our recently developed UnUNet method in terms of root mean squared error (RMSE), structural similarity (SSIM), residual distortions, and computation time. Imaging results demonstrated that the RebinNet reconstructed images with lowest RMSE (<0.05) and highest SSIM (>0.92) at four-time acceleration for simulated brain images. The RebinNet could better preserve structural details and substantially improve the computational efficiency (ten-fold faster) compared to the conventional regularization methods, and had better generalization ability than the UnUNet method. The proposed RebinNet can achieve rapid image reconstruction and overcome the B0 inhomogeneity distortions simultaneously, which would facilitate accurate and fast image guidance in radiotherapy treatments.
△ Less
Submitted 14 April, 2024;
originally announced April 2024.
-
Implementation of implicit filter for spatial spectra extraction
Authors:
Kacper Nowak,
Sergey Danilov,
Vasco Müller,
Caili Liu
Abstract:
Scale analysis based on coarse-graining has been proposed recently as an alternative to Fourier analysis. It is now broadly used to analyze energy spectra and energy transfers in eddy-resolving ocean simulations. However, for data from unstructured-mesh models it requires interpolation to a regular grid. We present a high-performance Python implementation of an alternative coarse-graining method w…
▽ More
Scale analysis based on coarse-graining has been proposed recently as an alternative to Fourier analysis. It is now broadly used to analyze energy spectra and energy transfers in eddy-resolving ocean simulations. However, for data from unstructured-mesh models it requires interpolation to a regular grid. We present a high-performance Python implementation of an alternative coarse-graining method which relies on implicit filters using discrete Laplacians. This method can work on arbitrary (structured or unstructured) meshes and is applicable to the direct output of unstructured-mesh ocean circulation atmosphere models. The computation is split into two phases: preparation and solving. The first one is specific only to the mesh. This allows for auxiliary arrays that are then computed to be reused, significantly reducing the computation time. The second part consists of sparse matrix algebra and solving linear system. Our implementation is accelerated by GPUs to achieve unmatched performance and scalability. This results in processing data based on meshes with more than 10M surface vertices in a matter of seconds. As an illustration, the method is applied to compute spatial spectra of ocean currents from high-resolution FESOM2 simulations.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Probing Berry phase effect in topological surface states
Authors:
Ya Bai,
Yang Jiang,
Wenyang Zheng,
Jiayin Chen,
Shuo Wang,
Candong Liu,
Ruxin Li,
Peng Liu
Abstract:
We have observed the Berry phase effect associated with interband coherence in topological surface states (TSSs) using two-color high-harmonic spectroscopy. This Berry phase accumulates along the evolution path of strong field-driven election-hole quasiparticles in electronic bands with strong spin-orbit coupling. By introducing a secondary weak field, we perturb the evolution of Dirac fermions in…
▽ More
We have observed the Berry phase effect associated with interband coherence in topological surface states (TSSs) using two-color high-harmonic spectroscopy. This Berry phase accumulates along the evolution path of strong field-driven election-hole quasiparticles in electronic bands with strong spin-orbit coupling. By introducing a secondary weak field, we perturb the evolution of Dirac fermions in TSSs and thus provide access to the Berry phase. We observe a significant shift in the oscillation phase of the even-order harmonics from the spectral interferogram. We reveal that such a modulation feature is linked to the geometric phase acquired in the nonperturbative dynamics of TSSs. Furthermore, we show that the overwhelming Berry phase effect can significantly deform the quantum paths of electron-hole pairs, thus enhancing the ability to harness electron spin using lightwaves in quantum materials with strong spin-orbit interactions.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Scaling of quantum Fisher information for quantum exceptional point sensors
Authors:
Chun-Hui Liu,
Fu Li,
Shengwang Du,
Jianming Wen,
Lan Yang,
Chuanwei Zhang
Abstract:
In recent years, significant progress has been made in utilizing the divergence of spectrum response rate at the exceptional point (EP) for sensing in classical systems, while the use and characterization of quantum EPs for sensing have been largely unexplored. For a quantum EP sensor, an important issue is the relation between the order of the quantum EP and the scaling of quantum Fisher informat…
▽ More
In recent years, significant progress has been made in utilizing the divergence of spectrum response rate at the exceptional point (EP) for sensing in classical systems, while the use and characterization of quantum EPs for sensing have been largely unexplored. For a quantum EP sensor, an important issue is the relation between the order of the quantum EP and the scaling of quantum Fisher information (QFI), an essential quantity for characterizing quantum sensors. Here we investigate multi-mode quadratic bosonic systems, which exhibit higher-order EP dynamics, but possess Hermitian Hamiltonians without Langevin noise, thus can be utilized for quantum sensing. We derive an exact analytic formula for the QFI, from which we establish a scaling relation between the QFI and the order of the EP. We apply the formula to study a three-mode EP sensor and a multi-mode bosonic Kitaev chain and show that the EP physics can significantly enhance the sensing sensitivity. Our work establishes the connection between two important fields: non-Hermitian EP dynamics and quantum sensing, and may find important applications in quantum information and quantum non-Hermitian physics.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Robustness of high-$β$ W7-X plasmas against ideal ballooning instability
Authors:
Yao Zhou,
K. Aleynikova,
Chang Liu,
N. M. Ferraro
Abstract:
To examine the robustness of the designed 5% $β$-limit for high-performance operation in the W7-X stellarator, we undertake nonlinear magnetohydrodynamic (MHD) simulations of pressure-driven instabilities using the M3D-$C^1$ code. Consistent with linear analyses, ideal ballooning instabilities occur as $β$ exceeds 5% in the standard configuration. Nonetheless, the modes saturate nonlinearly at rel…
▽ More
To examine the robustness of the designed 5% $β$-limit for high-performance operation in the W7-X stellarator, we undertake nonlinear magnetohydrodynamic (MHD) simulations of pressure-driven instabilities using the M3D-$C^1$ code. Consistent with linear analyses, ideal ballooning instabilities occur as $β$ exceeds 5% in the standard configuration. Nonetheless, the modes saturate nonlinearly at relatively low levels without triggering large-scale crashes, even though confinement degradation worsens as $β$ increases. In contrast, in an alternative configuration with nearly zero magnetic shear, ideal interchange modes induce a pressure crash at $β= 1\%$. These results suggest that the standard W7-X configuration might have a soft $β$-limit that is fairly immune to major MHD events, and that interchange instabilities tend to be more detrimental than ideal ballooning in stellarators.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Locating influential nodes in hypergraphs via fuzzy collective influence
Authors:
Su-Su Zhang,
Xiaoyan Yu,
Gui-Quan Sun,
Chuang Liu,
Xiu-Xiu Zhan
Abstract:
Complex contagion phenomena, such as the spread of information or contagious diseases, often occur among the population due to higher-order interactions between individuals. Individuals who can be represented by nodes in a network may play different roles in the spreading process, and thus finding the most influential nodes in a network has become a crucial topic in network science for application…
▽ More
Complex contagion phenomena, such as the spread of information or contagious diseases, often occur among the population due to higher-order interactions between individuals. Individuals who can be represented by nodes in a network may play different roles in the spreading process, and thus finding the most influential nodes in a network has become a crucial topic in network science for applications such as viral marketing, rumor suppression, and disease control. To solve the problem of identifying nodes that have high influence in a complex system, we propose a higher-order distance-based fuzzy centrality methods (HDF and EHDF) that are customized for a hypergraph which can characterize higher-order interactions between nodes via hyperedges. The methods we proposed assume that the influence of a node is reliant on the neighboring nodes with a certain higher-order distance. We compare the proposed methods with the baseline centrality methods to verify their effectiveness. Experimental results on six empirical hypergraphs show that the proposed methods could better identify influential nodes, especially showing plausible performance in finding the top influential nodes. Our proposed theoretical framework for identifying influential nodes could provide insights into how higher-order topological structure can be used for tasks such as vital node identification, influence maximization, and network dismantling.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Precise Control of Process Parameters for >23% Efficiency Perovskite Solar Cells in Ambient Air Using an Automated Device Acceleration Platform
Authors:
Jiyun Zhang,
Anastasia Barabash,
Tian Du,
Jianchang Wu,
Vincent M. Le Corre,
Yicheng Zhao,
Shudi Qiu,
Kaicheng Zhang,
Frederik Schmitt,
Zijian Peng,
Jingjing Tian,
Chaohui Li,
Chao Liu,
Thomas Heumueller,
Larry Lüer,
Jens A. Hauch,
Christoph J. Brabec
Abstract:
Achieving high-performance perovskite photovoltaics, especially in ambient air relies heavily on optimizing process parameters. However, traditional manual methods often struggle to effectively control the key variables. This inherent challenge requires a paradigm shift toward automated platforms capable of precise and reproducible experiments. Herein, we use a fully automated device acceleration…
▽ More
Achieving high-performance perovskite photovoltaics, especially in ambient air relies heavily on optimizing process parameters. However, traditional manual methods often struggle to effectively control the key variables. This inherent challenge requires a paradigm shift toward automated platforms capable of precise and reproducible experiments. Herein, we use a fully automated device acceleration platform (DAP) to optimize the process parameters for preparing full perovskite devices using a two-step method in ambient air. Eight process parameters that have the potential to significantly influence device performance are systematically optimized. Specifically, we delve into the impact of the dispense speed of organic ammonium halide, a parameter that is difficult to control manually, on both perovskite film and device performance. Through the targeted design of experiments, we reveal that the dispense speed significantly affects device performance primarily by adjusting the residual PbI2 content in the films. We find that moderate dispense speeds, e.g., 50 μl/s, contribute to top-performance devices. Conversely, too fast or too slow speeds result in devices with relatively poorer performance and lower reproducibility. The optimized parameter set enables us to establish a Standard Operation Procedure (SOP) for additive-free perovskite processing under ambient conditions, which yield devices with efficiencies surpassing 23%, satisfactory reproducibility, and state-of-the-art photo-thermal stability. This research underscores the importance of understanding the causality of process parameters in enhancing perovskite photovoltaic performance. Furthermore, our study highlights the pivotal role of automated platforms in discovering innovative workflows and accelerating the development of high-performing perovskite photovoltaic technologies.
△ Less
Submitted 29 March, 2024;
originally announced April 2024.
-
Development of low-radon ultra-pure water for the Jiangmen Underground Neutrino Observatory
Authors:
T. Y. Guan,
Y. P. Zhang,
B. Wang,
C. Guo,
J. C. Liu,
Q. Tang,
C. G. Yang,
C. Li
Abstract:
The Jiangmen Underground Neutrino Observatory(JUNO) is a state-of-the-art liquid scintillator-based neutrino physics experiment under construction in South China. To reduce the background from external radioactivities, a water Cherenkov detector composed of 35~kton ultra-pure water and 2,400 20-inch photomultiplier tubes is developed. Even after specialized treatment, ultra-pure water still contai…
▽ More
The Jiangmen Underground Neutrino Observatory(JUNO) is a state-of-the-art liquid scintillator-based neutrino physics experiment under construction in South China. To reduce the background from external radioactivities, a water Cherenkov detector composed of 35~kton ultra-pure water and 2,400 20-inch photomultiplier tubes is developed. Even after specialized treatment, ultra-pure water still contains trace levels of radioactive elements that can contribute to the detector background. Among which $^{222}$Rn is particularly significant. To address this, an online radon removal system based on the JUNO prototype has been developed. By integrating micro-bubble generators to enhance degasser's radon removal efficiency, the radon concentration in water can be reduced to 1~mBq/m$^{3}$ level, meeting the stringent requirements of JUNO. Additionally, a highly sensitive online radon concentration measurement system capable of detecting concentrations $\sim$1~mBq/m$^3$ has been developed to monitor the radon concentration in water. In this paper, the details regarding both systems will be presented.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Self-Consistency Training for Density-Functional-Theory Hamiltonian Prediction
Authors:
He Zhang,
Chang Liu,
Zun Wang,
Xinran Wei,
Siyuan Liu,
Nanning Zheng,
Bin Shao,
Tie-Yan Liu
Abstract:
Predicting the mean-field Hamiltonian matrix in density functional theory is a fundamental formulation to leverage machine learning for solving molecular science problems. Yet, its applicability is limited by insufficient labeled data for training. In this work, we highlight that Hamiltonian prediction possesses a self-consistency principle, based on which we propose self-consistency training, an…
▽ More
Predicting the mean-field Hamiltonian matrix in density functional theory is a fundamental formulation to leverage machine learning for solving molecular science problems. Yet, its applicability is limited by insufficient labeled data for training. In this work, we highlight that Hamiltonian prediction possesses a self-consistency principle, based on which we propose self-consistency training, an exact training method that does not require labeled data. It distinguishes the task from predicting other molecular properties by the following benefits: (1) it enables the model to be trained on a large amount of unlabeled data, hence addresses the data scarcity challenge and enhances generalization; (2) it is more efficient than running DFT to generate labels for supervised training, since it amortizes DFT calculation over a set of queries. We empirically demonstrate the better generalization in data-scarce and out-of-distribution scenarios, and the better efficiency over DFT labeling. These benefits push forward the applicability of Hamiltonian prediction to an ever-larger scale.
△ Less
Submitted 5 June, 2024; v1 submitted 14 March, 2024;
originally announced March 2024.
-
Radiative lifetime of the A 2Π1/2 state in RaF with relevance to laser cooling
Authors:
M. Athanasakis-Kaklamanakis,
S. G. Wilkins,
P. Lassègues,
L. Lalanne,
J. R. Reilly,
O. Ahmad,
M. Au,
S. W. Bai,
J. Berbalk,
C. Bernerd,
A. Borschevsky,
A. A. Breier,
K. Chrysalidis,
T. E. Cocolios,
R. P. de Groote,
C. M. Fajardo-Zambrano,
K. T. Flanagan,
S. Franchoo,
R. F. Garcia Ruiz,
D. Hanstorp,
R. Heinke,
P. Imgram,
A. Koszorús,
A. A. Kyuberis,
J. Lim
, et al. (16 additional authors not shown)
Abstract:
The radiative lifetime of the $A$ $^2 Π_{1/2}$ (v=0) state in radium monofluoride (RaF) is measured to be 35(1) ns. The lifetime of this state and the related decay rate $Γ= 2.86(8) \times 10^7$ $s^{-1}$ are of relevance to the laser cooling of RaF via the optically closed $A$ $^2 Π_{1/2} \leftarrow X$ $^2Σ_{1/2}$ transition, which makes the molecule a promising probe to search for new physics. Ra…
▽ More
The radiative lifetime of the $A$ $^2 Π_{1/2}$ (v=0) state in radium monofluoride (RaF) is measured to be 35(1) ns. The lifetime of this state and the related decay rate $Γ= 2.86(8) \times 10^7$ $s^{-1}$ are of relevance to the laser cooling of RaF via the optically closed $A$ $^2 Π_{1/2} \leftarrow X$ $^2Σ_{1/2}$ transition, which makes the molecule a promising probe to search for new physics. RaF is found to have a comparable photon-scattering rate to homoelectronic laser-coolable molecules. Thanks to its highly diagonal Franck-Condon matrix, it is expected to scatter an order of magnitude more photons than other molecules when using just 3 cooling lasers, before it decays to a dark state. The lifetime measurement in RaF is benchmarked by measuring the lifetime of the $8P_{3/2}$ state in Fr to be 83(3) ns, in agreement with literature.
△ Less
Submitted 6 June, 2024; v1 submitted 14 March, 2024;
originally announced March 2024.
-
Artificial Intelligence for Complex Network: Potential, Methodology and Application
Authors:
Jingtao Ding,
Chang Liu,
Yu Zheng,
Yunke Zhang,
Zihan Yu,
Ruikun Li,
Hongyi Chen,
Jinghua Piao,
Huandong Wang,
Jiazhen Liu,
Yong Li
Abstract:
Complex networks pervade various real-world systems, from the natural environment to human societies. The essence of these networks is in their ability to transition and evolve from microscopic disorder-where network topology and node dynamics intertwine-to a macroscopic order characterized by certain collective behaviors. Over the past two decades, complex network science has significantly enhanc…
▽ More
Complex networks pervade various real-world systems, from the natural environment to human societies. The essence of these networks is in their ability to transition and evolve from microscopic disorder-where network topology and node dynamics intertwine-to a macroscopic order characterized by certain collective behaviors. Over the past two decades, complex network science has significantly enhanced our understanding of the statistical mechanics, structures, and dynamics underlying real-world networks. Despite these advancements, there remain considerable challenges in exploring more realistic systems and enhancing practical applications. The emergence of artificial intelligence (AI) technologies, coupled with the abundance of diverse real-world network data, has heralded a new era in complex network science research. This survey aims to systematically address the potential advantages of AI in overcoming the lingering challenges of complex network research. It endeavors to summarize the pivotal research problems and provide an exhaustive review of the corresponding methodologies and applications. Through this comprehensive survey-the first of its kind on AI for complex networks-we expect to provide valuable insights that will drive further research and advancement in this interdisciplinary field.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Point spread function engineering for spiral phase interferometric scattering microscopy enables robust 3D single-particle tracking
Authors:
Nathan J. Brooks,
Chih-Chen Liu,
Chia-Lung Hsieh
Abstract:
Interferometric scattering (iSCAT) microscopy is currently among the most powerful techniques available for achieving high-sensitivity single-particle localization. This capability is realized through homodyne detection, where interference with a reference wave offers the promise of exceptionally precise three-dimensional (3D) localization. However, the practical application of iSCAT to 3D trackin…
▽ More
Interferometric scattering (iSCAT) microscopy is currently among the most powerful techniques available for achieving high-sensitivity single-particle localization. This capability is realized through homodyne detection, where interference with a reference wave offers the promise of exceptionally precise three-dimensional (3D) localization. However, the practical application of iSCAT to 3D tracking has to date been hampered by rapid oscillations in the signal-to-noise ratio (SNR) as particles move along the axial direction. In this study, we introduce a novel strategy based on back pupil plane engineering, wherein we use a spiral phase mask to re-distribute the phase of the scattered field of the particle uniformly across phase space, thus ensuring consistent SNR as the particle moves throughout the focal volume. Our findings demonstrate that this modified spiral phase iSCAT exhibits greatly enhanced localizability characteristics. We substantiate our theoretical results with numerical and experimental demonstrations, showcasing the practical application of this approach for high-precision, ultrahigh-speed (20,000 frames per second) 3D tracking, and characterization of freely diffusing nanoparticles.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
Developing a $μ$Bq/m$^{3}$ level $^{226}$Ra concentration in water measurement system for the Jiangmen Underground Neutrino Observatory
Authors:
C. Li,
B. Wang,
Y. Liu,
C. Guo,
Y. P. Zhang,
J. C. Liu,
Q. Tang,
T. Y. Guan,
C. G. Yang
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO), a 20~kton multi-purpose low background Liquid Scintillator (LS) detector, was proposed primarily to determine the neutrino mass ordering. To suppress the radioactivity from the surrounding rocks and tag cosmic muons, the JUNO central detector is submerged in a Water Cherenkov Detector (WCD). In addition to being used in the WCD, ultrapure water…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO), a 20~kton multi-purpose low background Liquid Scintillator (LS) detector, was proposed primarily to determine the neutrino mass ordering. To suppress the radioactivity from the surrounding rocks and tag cosmic muons, the JUNO central detector is submerged in a Water Cherenkov Detector (WCD). In addition to being used in the WCD, ultrapure water is used in LS filling, for which the $^{226}$Ra concentration in water needs to be less than 50~$μ$Bq/m$^3$. To precisely measure the $^{226}$Ra concentration in water, a 6.0~$μ$Bq/m$^3$ $^{226}$Ra concentration in water measurement system has been developed. In this paper, the detail of the measurement system as well as the $^{226}$Ra concentration measurement result in regular EWII ultrapure water will be presented.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
A proposed PKU-Muon experiment for muon tomography and dark matter search
Authors:
Xudong Yu,
Zijian Wang,
Cheng-en Liu,
Yiqing Feng,
Jinning Li,
Xinyue Geng,
Yimeng Zhang,
Leyun Gao,
Ruobing Jiang,
Youpeng Wu,
Chen Zhou,
Qite Li,
Siguang Wang,
Yong Ban,
Yajun Mao,
Qiang Li
Abstract:
We propose here a set of new methods to directly detect light mass dark matter through its scattering with abundant atmospheric muons or accelerator beams. Firstly, we plan to use the free cosmic-ray muons interacting with dark matter in a volume surrounded by tracking detectors, to trace possible interaction between dark matter and muons. Secondly, we will interface our device with domestic or in…
▽ More
We propose here a set of new methods to directly detect light mass dark matter through its scattering with abundant atmospheric muons or accelerator beams. Firstly, we plan to use the free cosmic-ray muons interacting with dark matter in a volume surrounded by tracking detectors, to trace possible interaction between dark matter and muons. Secondly, we will interface our device with domestic or international muon beams. Due to much larger muon intensity and focused beam, we anticipate the detector can be made further compact and the resulting sensitivity on dark matter searches will be improved. Furthermore, we will measure precisely directional distributions of cosmic-ray muons, either at mountain or sea level, and the differences may reveal possible information of dark matter distributed near the earth. Specifically, our methods can have advantages over `exotic' dark matters which are either muon-philic or slowed down due to some mechanism, and sensitivity on dark matter and muon scattering cross section can reach as low as microbarn level.
△ Less
Submitted 23 March, 2024; v1 submitted 20 February, 2024;
originally announced February 2024.
-
Optically Levitated Nanoparticles as Receiving Antennas for Low Frequency Wireless Communication
Authors:
Zhenhai Fu,
Jinsheng Xu,
Shaochong Zhu,
Chaoxiong He,
Xunming Zhu,
Xiaowen Gao,
Han Cai,
Peitong He,
Zhiming Chen,
Yizhou Zhang,
Nan Li,
Xingfan Chen,
Ying Dong,
Shiyao Zhu,
Cheng Liu,
Huizhu Hu
Abstract:
Low-frequency (LF) wireless communications play a crucial role in ensuring anti-interference, long-range, and efficient communication across various environments. However, in conventional LF communication systems, their antenna size is required to be inversely proportional to the wavelength, so that their mobility and flexibility are greatly limited. Here we introduce a novel prototype of LF recei…
▽ More
Low-frequency (LF) wireless communications play a crucial role in ensuring anti-interference, long-range, and efficient communication across various environments. However, in conventional LF communication systems, their antenna size is required to be inversely proportional to the wavelength, so that their mobility and flexibility are greatly limited. Here we introduce a novel prototype of LF receiving antennas based on optically levitated nanoparticles, which overcomes the size-frequency limitation to reduce the antenna size to the hundred-nanometer scale. These charged particles are extremely sensitive to external electric field as mechanical resonators, and their resonant frequencies are adjustable. The effectiveness of these antennas was experimentally demonstrated by using the frequency shift keying (2FSK) modulation scheme. The experimental results indicate a correlation between error rate and factors such as transmission rate, signal strength, and vacuum degree with a signal strength of approximately 0.1V/m and a bit error rate below 0.1%. This advancement in leveraging levitated particle mechanical resonators (LPMRs) as LF antennas marks a significant stride in long-distance communication technology.
△ Less
Submitted 10 January, 2024;
originally announced February 2024.
-
Saturation of fishbone instability through zonal flows driven by energetic particle transport in tokamak plasmas
Authors:
G. Brochard,
C. Liu,
X. Wei,
W. Heidbrink,
Z. Lin,
M. V. Falessi,
F. Zonca,
Z. Qiu,
N. Gorelenkov,
C. Chrystal,
X. Du,
J. Bao,
A. R. Polevoi,
M. Schneider,
S. H. Kim,
S. D. Pinches,
P. Liu,
J. H. Nicolau,
H. Lütjens,
the ISEP group
Abstract:
Gyrokinetic and kinetic-MHD simulations are performed for the fishbone instability in the DIII-D discharge #178631, chosen for validation of first-principles simulations to predict the energetic particle (EP) transport in an ITER prefusion baseline scenario. Fishbone modes are found to generate zonal flows, which dominate the fishbone saturation. The underlying mechanisms of the two-way fishbone-z…
▽ More
Gyrokinetic and kinetic-MHD simulations are performed for the fishbone instability in the DIII-D discharge #178631, chosen for validation of first-principles simulations to predict the energetic particle (EP) transport in an ITER prefusion baseline scenario. Fishbone modes are found to generate zonal flows, which dominate the fishbone saturation. The underlying mechanisms of the two-way fishbone-zonal flows nonlinear interplay are discussed in details. Numerical and analytical analyses identify the fishbone-induced EP redistribution as the dominant generation mechanism for zonal flows. The zonal flows modify the nonlinear dynamics of phase space zonal structures, which reduces the amount of EPs able to resonate with the mode, leading to an early fishbone saturation. Simulation results including zonal flows agree quantitatively with DIII-D experimental measurements of the fishbone saturation amplitude and EP transport, supporting this novel saturation mechanism by self-generated zonal flows. Moreover, the wave-particle mode-locking mechanism is shown to determine quantitatively the fishbone frequency down-chirping, as evident in GTC simulation results in agreement with predictions from analytical theory. Finally, the fishbone-induced zonal flows are possibly responsible for the formation of an ion-ITB in the DIII-D discharge. Based on the low EP transport and the large zonal flow shearing rates associated with the fishbone instability in gyrokinetic simulations of the ITER scenario, it is conjectured that high performance scenarios could be designed in ITER burning plasmas through fishbone-induced ITBs.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Infrared Spectra Prediction for Diazo Groups Utilizing a Machine Learning Approach with Structural Attention Mechanism
Authors:
Chengchun Liu,
Fanyang Mo
Abstract:
Infrared (IR) spectroscopy is a pivotal technique in chemical research for elucidating molecular structures and dynamics through vibrational and rotational transitions. However, the intricate molecular fingerprints characterized by unique vibrational and rotational patterns present substantial analytical challenges. Here, we present a machine learning approach employing a Structural Attention Mech…
▽ More
Infrared (IR) spectroscopy is a pivotal technique in chemical research for elucidating molecular structures and dynamics through vibrational and rotational transitions. However, the intricate molecular fingerprints characterized by unique vibrational and rotational patterns present substantial analytical challenges. Here, we present a machine learning approach employing a Structural Attention Mechanism tailored to enhance the prediction and interpretation of infrared spectra, particularly for diazo compounds. Our model distinguishes itself by honing in on chemical information proximal to functional groups, thereby significantly bolstering the accuracy, robustness, and interpretability of spectral predictions. This method not only demystifies the correlations between infrared spectral features and molecular structures but also offers a scalable and efficient paradigm for dissecting complex molecular interactions.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
Emergence of tension-compression asymmetry from a complete phase-field approach to brittle fracture
Authors:
Chang Liu,
Aditya Kumar
Abstract:
The classical variational approach to brittle fracture propagation does not distinguish between strain energy accumulation in tension versus compression and consequently results in physically unrealistic cracking under compression. A variety of energy splits have been proposed as a possible remedy. However, a unique energy split that can describe this asymmetry for general loading conditions has n…
▽ More
The classical variational approach to brittle fracture propagation does not distinguish between strain energy accumulation in tension versus compression and consequently results in physically unrealistic cracking under compression. A variety of energy splits have been proposed as a possible remedy. However, a unique energy split that can describe this asymmetry for general loading conditions has not been found. The main objective of this paper is to show that a complete phase-field theory of brittle fracture nucleation and propagation, one that accounts for the material strength at large, can naturally capture the tension-compression asymmetry without an energy split. One such theory has been recently proposed by Kumar et al. (2018). Over the past few years, several studies have shown that this theory is capable of accurately describing fracture nucleation and propagation for materials soft and hard under arbitrary monotonic loading conditions. However, a systematic study of the tension-compression asymmetry that emerges from this theory has not yet been reported. This paper does precisely that. In particular, this paper reports a comprehensive study of crack propagation in two problems, one involving a symmetric tension-compression state and the other involving larger compressive stresses at the crack tip. The results are compared with popular energy splits used in literature. The results show that, remarkably, for the second problem, only the complete theory is able to produce experimentally consistent results.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
The 120Gbps VCSEL Array Based Optical Transmitter (ATx) Development for the High-Luminosity LHC (HL-LHC) Experiments
Authors:
Di Guo,
Chonghan Liu,
Jinghong Chen,
John Chramowicz,
Binwei Deng,
Datao Gong,
Suen Hou,
Ge Jin,
Simon Kwan,
Futian Liang,
Xiaoting Li,
Gang Liu,
Tiankuan Liu,
Alan Prosser,
Da-Shung Su,
Ping-Kun Teng,
Tongye Xu,
Jingbo Ye,
Xiandong Zhao,
Annie C. Xiang,
Hao Liang
Abstract:
The integration of a Verticle Cavity Surface-Emitting Laser (VCSEL) array and a driving Application-Specific Integrated Circuit (ASIC) in a custom optical array transmitter module (ATx) for operation in the detector front-end is constructed, assembled and tested. The ATx provides 12 parallel channels with each channel operating at 10 Gbps. The optical transmitter eye diagram passes the eye mask an…
▽ More
The integration of a Verticle Cavity Surface-Emitting Laser (VCSEL) array and a driving Application-Specific Integrated Circuit (ASIC) in a custom optical array transmitter module (ATx) for operation in the detector front-end is constructed, assembled and tested. The ATx provides 12 parallel channels with each channel operating at 10 Gbps. The optical transmitter eye diagram passes the eye mask and the bit-error rate (BER) less than 1E-12 transmission is achieved at 10 Gbps/ch. The overall insertion loss including the radiation induced attenuation is sufficiently low to meet the proposed link budget requirement.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Optical Data Transmission ASICs for the High-Luminosity LHC (HL-LHC) Experiments
Authors:
Xiaoting Li,
Gang Liu,
Jinghong Chen,
Binwei Deng,
Datao Gong,
Di Guo,
Mengxun He,
Suen Hou,
Guangming Huang,
Ge Jin,
Hao Liang,
Futian Liang,
Chonghan Liu,
Tiankuan Liu,
Xiangming Sun,
Ping-Kun Teng,
Annie C. Xiang,
Jingbo Ye,
Yang You,
Xiandong Zhao
Abstract:
We present the design and test results of two optical data transmission ASICs for the High-Luminosity LHC (HL-LHC) experiments. These ASICs include a two-channel serializer (LOCs2) and a single-channel Vertical Cavity Surface Emitting Laser (VCSEL) driver (LOCld1V2). Both ASICs are fabricated in a commercial 0.25-um Silicon-on-Sapphire (SoS) CMOS technology and operate at a data rate up to 8 Gbps…
▽ More
We present the design and test results of two optical data transmission ASICs for the High-Luminosity LHC (HL-LHC) experiments. These ASICs include a two-channel serializer (LOCs2) and a single-channel Vertical Cavity Surface Emitting Laser (VCSEL) driver (LOCld1V2). Both ASICs are fabricated in a commercial 0.25-um Silicon-on-Sapphire (SoS) CMOS technology and operate at a data rate up to 8 Gbps per channel. The power consumption of LOCs2 and LOCld1V2 are 1.25 W and 0.27 W at 8-Gbps data rate, respectively. LOCld1V2 has been verified meeting the radiation-tolerance requirements for HL-LHC experiments.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
The Design of a High Speed Low Power Phase Locked Loop
Authors:
Tiankuan Liu,
Datao Gong,
Suen Hou,
Zhihua Liang,
Chonghan Liu,
Da-Shung Su,
Ping-Kun Teng,
Annie C. Xiang,
Jingbo Ye
Abstract:
The upgrade of the ATLAS Liquid Argon Calorimeter readout system calls for the development of radiation tolerant, high speed and low power serializer ASIC. We have designed a phase locked loop using a commercial 0.25 um Silicon-on-Sapphire (SoS) CMOS technology. Post-layout simulation indicates that tuning range is 3.79-5.01 GHz and power consumption is 104 mW. The PLL has been submitted for fabri…
▽ More
The upgrade of the ATLAS Liquid Argon Calorimeter readout system calls for the development of radiation tolerant, high speed and low power serializer ASIC. We have designed a phase locked loop using a commercial 0.25 um Silicon-on-Sapphire (SoS) CMOS technology. Post-layout simulation indicates that tuning range is 3.79-5.01 GHz and power consumption is 104 mW. The PLL has been submitted for fabrication. The design and simulation results are presented.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
A compact and cost-effective laser-powered speckle visibility spectroscopy (SVS) device for measuring cerebral blood flow
Authors:
Yu Xi Huang,
Simon Mahler,
Maya Dickson,
Aidin Abedi,
Julian M. Tyszka,
Jack Lo Yu Tung,
Jonathan Russin,
Charles Liu,
Changhuei Yang
Abstract:
In the realm of cerebrovascular monitoring, primary metrics typically include blood pressure, which influences cerebral blood flow (CBF) and is contingent upon vessel radius. Measuring CBF non-invasively poses a persistent challenge, primarily attributed to the difficulty of accessing and obtaining signal from the brain. This study aims to introduce a compact speckle visibility spectroscopy (SVS)…
▽ More
In the realm of cerebrovascular monitoring, primary metrics typically include blood pressure, which influences cerebral blood flow (CBF) and is contingent upon vessel radius. Measuring CBF non-invasively poses a persistent challenge, primarily attributed to the difficulty of accessing and obtaining signal from the brain. This study aims to introduce a compact speckle visibility spectroscopy (SVS) device designed for non-invasive CBF measurements, offering cost-effectiveness and scalability while tracking CBF with remarkable sensitivity and temporal resolution. The wearable hardware has a modular design approach consisting solely of a laser diode as the source and a meticulously selected board camera as the detector. They both can be easily placed on the head of a subject to measure CBF with no additional optical elements. The SVS device can achieve a sampling rate of 80 Hz with minimal susceptibility to external disturbances. The device also achieves better SNR compared with traditional fiber-based SVS devices, capturing about 70 times more signal and showing superior stability and reproducibility. It is designed to be paired and distributed in multiple configurations around the head, and measure signals that exceed the quality of prior optical CBF measurement techniques. Given its cost-effectiveness, scalability, and simplicity, this laser-centric tool offers significant potential in advancing non-invasive cerebral monitoring technologies.
△ Less
Submitted 8 February, 2024; v1 submitted 29 January, 2024;
originally announced January 2024.
-
Characteristics of the MTx optical transmitter in Total Ionizing Dose
Authors:
D. Gong,
S. Hou,
B. J. Juang,
J. -H. Li,
C. Liu,
T. Liu,
M. Qi,
J. Ye,
Lei Zhang,
Li Zhang,
H. P. Zhu
Abstract:
The dual-channel multi-mode 850 nm optical Miniature Transmitter (MTx) is developed for data transmission of the ATLAS LAr calorimeter readout at LHC. The MTx's are exposed to the radiation field of proton-proton collisions, therefore, the tolerance in Total Ionizing Dose (TID) is required. The TID effects in the MTx are investigated with X-rays and Co-60 gamma-rays for the active components of VC…
▽ More
The dual-channel multi-mode 850 nm optical Miniature Transmitter (MTx) is developed for data transmission of the ATLAS LAr calorimeter readout at LHC. The MTx's are exposed to the radiation field of proton-proton collisions, therefore, the tolerance in Total Ionizing Dose (TID) is required. The TID effects in the MTx are investigated with X-rays and Co-60 gamma-rays for the active components of VCSEL diodes and the customized Link-on-Chip laser driver (LOCld) developed in 0.25 um Silicon-on-Sapphire CMOS technology. The irradiation tests were conducted at various dose rates. The responses to TID are observed with degradation of laser currents at initial dose of 10 to 100 Gy(SiO2), and partial recovery with additional TID to a stable output about 90 % of the original. The optical eye diagrams of irradiated samples show slightly increased jittering, and are suitable for the ATLAS requirement of 5 Gbps applications.
△ Less
Submitted 28 April, 2024; v1 submitted 29 January, 2024;
originally announced January 2024.
-
Development of A 16:1 serializer for data transmission at 5 Gbps
Authors:
Datao Gong,
Suen Hou,
Zhihua Liang,
Chonghan Liu,
Tiankuan Liu,
Da-Shun Su,
Ping-Kun Teng,
Annie C. Xiang,
Jingbo Ye
Abstract:
Radiation tolerant, high speed and low power serializer ASIC is critical for optical link systems in particle physics experiments. Based on a commercial 0.25 um silicon-on-sapphire CMOS technology, we design a 16:1 serializer with 5 Gbps serial data rate. This ASIC has been submitted for fabrication. The post-layout simulation indicates the deterministic jitter is 54 ps (pk-pk) and random jitter i…
▽ More
Radiation tolerant, high speed and low power serializer ASIC is critical for optical link systems in particle physics experiments. Based on a commercial 0.25 um silicon-on-sapphire CMOS technology, we design a 16:1 serializer with 5 Gbps serial data rate. This ASIC has been submitted for fabrication. The post-layout simulation indicates the deterministic jitter is 54 ps (pk-pk) and random jitter is 3 ps (rms). The power consumption of the serializer is 500 mW. The design details and post layout simulation results are presented in this paper.
△ Less
Submitted 28 January, 2024;
originally announced January 2024.
-
High-Speed Serial Optical Link Test Bench Using FPGA with Embedded Transceivers
Authors:
Annie C. Xiang,
Tingting Cao,
Datao Gong,
Suen Hou,
Chonghan Liu,
Tiankuan Liu,
Da-Shung Su,
Ping-Kun Teng,
Jingbo Ye
Abstract:
We develop a custom Bit Error Rate test bench based on Altera's Stratix II GX transceiver signal integrity development kit, demonstrate it on point-to-point serial optical link with data rate up to 5 Gbps, and compare it with commercial stand alone tester. The 8B/10B protocol is implemented and its effects studied. A variable optical attenuator is inserted in the fibre loop to induce transmission…
▽ More
We develop a custom Bit Error Rate test bench based on Altera's Stratix II GX transceiver signal integrity development kit, demonstrate it on point-to-point serial optical link with data rate up to 5 Gbps, and compare it with commercial stand alone tester. The 8B/10B protocol is implemented and its effects studied. A variable optical attenuator is inserted in the fibre loop to induce transmission degradation and to measure receiver sensitivity. We report comparable receiver sensitivity results using the FPGA based tester and commercial tester. The results of the FPGA also shows that there are more one-to-zero bit flips than zero-to-one bit flips at lower error rate. In 8B/10B coded transmission, there are more word errors than bit flips, and the total error rate is less than two times that of non-coded transmission. Total error rate measured complies with simulation results, according to the protocol setup.
△ Less
Submitted 28 January, 2024;
originally announced January 2024.
-
The Clock Distribution System for the ATLAS Liquid Argon Calorimeter Phase-I Upgrade Demonstrator
Authors:
Binwei Deng,
Hucheng Chen,
Kai Chen,
Jinghong Chen,
Datao Gong,
Di Guo,
Xueye Hu,
Deping Huang,
James Kierstead,
Xiaoting Li,
Chonghan Liu,
Tiankuan Liu,
Annie C. Xiang,
Hao Xu,
Tongye Xu,
Yang You,
Jingbo Ye
Abstract:
A prototype Liquid-argon Trigger Digitizer Board (LTDB), called the LTDB Demonstrator, has been developed to demonstrate the functions of the ATLAS Liquid Argon Calorimeter Phase-I trigger electronics upgrade. Forty Analog-to-Digital converters and four FPGAs with embedded multi-gigabit-transceivers on each Demonstrator need high quality clocks. A clock distribution system based on commercial comp…
▽ More
A prototype Liquid-argon Trigger Digitizer Board (LTDB), called the LTDB Demonstrator, has been developed to demonstrate the functions of the ATLAS Liquid Argon Calorimeter Phase-I trigger electronics upgrade. Forty Analog-to-Digital converters and four FPGAs with embedded multi-gigabit-transceivers on each Demonstrator need high quality clocks. A clock distribution system based on commercial components has been developed for the Demonstrator. The design of the clock distribution system is presented. The performance of the clock distribution system has been evaluated. The components used in the clock distribution system have been qualified to meet radiation tolerance requirements of the Demonstrator.
△ Less
Submitted 28 January, 2024;
originally announced January 2024.
-
The VCSEL-based Array Optical Transmitter (ATx) Development Towards 120-Gbps Link for Collider Detector: Development Update
Authors:
Di Guo,
Chonghan Liu,
Jinghong Chen,
John Chramowicz,
Datao Gong,
Suen Hou,
Deping Huang,
Ge Jin,
Xiaoting Li,
Tiankuan Liu,
Alan Prosser,
Ping-Kun Teng,
Jingbo Ye,
Yongzhao Zhou,
Yang You,
Annie C. Xiang,
Hao Liang
Abstract:
A compact radiation-tolerant array optical transmitter module (ATx) is developed to provide data transmission up to 10Gbps per channel with 12 parallel channels for collider detector applications. The ATx integrates a Vertical Cavity Surface-Emitting Laser (VCSEL) array and driver circuitry for electrical to optical conversion, an edge warp substrate for the electrical interface and a micro-lens a…
▽ More
A compact radiation-tolerant array optical transmitter module (ATx) is developed to provide data transmission up to 10Gbps per channel with 12 parallel channels for collider detector applications. The ATx integrates a Vertical Cavity Surface-Emitting Laser (VCSEL) array and driver circuitry for electrical to optical conversion, an edge warp substrate for the electrical interface and a micro-lens array for the optical interface. This paper reports the continuing development of the ATx custom package. A simple, high-accuracy and reliable active-alignment method for the optical coupling is introduced. The radiation-resistance of the optoelectronic components is evaluated and the inclusion of a custom-designed array driver is discussed.
△ Less
Submitted 28 January, 2024;
originally announced January 2024.
-
JTAG-based Remote Configuration of FPGAs over Optical Fibers
Authors:
Binwei Deng,
Chonghan Liu,
Jinghong Chen,
Kai Chen,
Datao Gong,
Di Guo,
Suen Hou,
Deping Huang,
Xiaoting Li,
Tiankuan Liu,
Ping-Kun Teng,
Annie C. Xiang,
Hao Xu,
Yang You,
Jingbo Ye
Abstract:
In this paper, a remote FPGA-configuration method based on JTAG extension over optical fibers is presented. The method takes advantage of commercial components and ready-to-use software such as iMPACT and does not require any hardware or software development. The method combines the advantages of the slow remote JTAG configuration and the fast local flash memory configuration. The method has been…
▽ More
In this paper, a remote FPGA-configuration method based on JTAG extension over optical fibers is presented. The method takes advantage of commercial components and ready-to-use software such as iMPACT and does not require any hardware or software development. The method combines the advantages of the slow remote JTAG configuration and the fast local flash memory configuration. The method has been verified successfully and used in the Demonstrator of Liquid-Argon Trigger Digitization Board (LTDB) for the ATLAS liquid argon calorimeter Phase-I trigger upgrade. All components on the FPGA side are verified to meet the radiation tolerance requirements.
△ Less
Submitted 28 January, 2024;
originally announced January 2024.
-
The Radiation Oncology NLP Database
Authors:
Zhengliang Liu,
Jason Holmes,
Wenxiong Liao,
Chenbin Liu,
Lian Zhang,
Hongying Feng,
Peilong Wang,
Muhammad Ali Elahi,
Hongmin Cai,
Lichao Sun,
Quanzheng Li,
Xiang Li,
Tianming Liu,
Jiajian Shen,
Wei Liu
Abstract:
We present the Radiation Oncology NLP Database (ROND), the first dedicated Natural Language Processing (NLP) dataset for radiation oncology, an important medical specialty that has received limited attention from the NLP community in the past. With the advent of Artificial General Intelligence (AGI), there is an increasing need for specialized datasets and benchmarks to facilitate research and dev…
▽ More
We present the Radiation Oncology NLP Database (ROND), the first dedicated Natural Language Processing (NLP) dataset for radiation oncology, an important medical specialty that has received limited attention from the NLP community in the past. With the advent of Artificial General Intelligence (AGI), there is an increasing need for specialized datasets and benchmarks to facilitate research and development. ROND is specifically designed to address this gap in the domain of radiation oncology, a field that offers many opportunities for NLP exploration. It encompasses various NLP tasks including Logic Reasoning, Text Classification, Named Entity Recognition (NER), Question Answering (QA), Text Summarization, and Patient-Clinician Conversations, each with a distinct focus on radiation oncology concepts and application cases. In addition, we have developed an instruction-tuning dataset consisting of over 20k instruction pairs (based on ROND) and trained a large language model, CancerChat. This serves to demonstrate the potential of instruction-tuning large language models within a highly-specialized medical domain. The evaluation results in this study could serve as baseline results for future research. ROND aims to stimulate advancements in radiation oncology and clinical NLP by offering a platform for testing and improving algorithms and models in a domain-specific context. The ROND dataset is a joint effort of multiple U.S. health institutions. The data is available at https://github.com/zl-liu/Radiation-Oncology-NLP-Database.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
Centralized active reconfigurable intelligent surface: Architecture, path loss analysis and experimental verification
Authors:
Changhao Liu,
Fan Yang,
Shenheng Xu,
Yezhen Li,
Maokun Li
Abstract:
Reconfigurable intelligent surfaces (RISs) are promising candidate for the 6G communication. Recently, active RIS has been proposed to compensate the multiplicative fading effect inherent in passive RISs. However, conventional distributed active RISs, with at least one amplifier per element, are costly, complex, and power-intensive. To address these challenges, this paper proposes a novel architec…
▽ More
Reconfigurable intelligent surfaces (RISs) are promising candidate for the 6G communication. Recently, active RIS has been proposed to compensate the multiplicative fading effect inherent in passive RISs. However, conventional distributed active RISs, with at least one amplifier per element, are costly, complex, and power-intensive. To address these challenges, this paper proposes a novel architecture of active RIS: the centralized active RIS (CA-RIS), which amplifies the energy using a centralized amplifying reflector to reduce the number of amplifiers. Under this architecture, only as low as one amplifier is needed for power amplification of the entire array, which can eliminate the mutual-coupling effect among amplifiers, and significantly reduce the cost, noise level, and power consumption. We evaluate the performance of CA-RIS, specifically its path loss, and compare it with conventional passive RISs, revealing a moderate amplification gain. Furthermore, the proposed CA-RIS and the path loss model are experimentally verified, achieving a 9.6 dB net gain over passive RIS at 4 GHz. The CA-RIS offers a substantial simplification of active RIS architecture while preserving performance, striking an optimal balance between system complexity and the performance, which is competitive in various scenarios.
△ Less
Submitted 18 January, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Directed network comparison using motifs
Authors:
Chenwei Xie,
Qiao Ke,
Haoyu Chen,
Chuang Liu,
Xiu-Xiu Zhan
Abstract:
Analyzing and characterizing the differences between networks is a fundamental and challenging problem in network science. Previously, most network comparison methods that rely on topological properties have been restricted to measuring differences between two undirected networks. However, many networks, such as biological networks, social networks, and transportation networks, exhibit inherent di…
▽ More
Analyzing and characterizing the differences between networks is a fundamental and challenging problem in network science. Previously, most network comparison methods that rely on topological properties have been restricted to measuring differences between two undirected networks. However, many networks, such as biological networks, social networks, and transportation networks, exhibit inherent directionality and higher-order attributes that should not be ignored when comparing networks. Therefore, we propose a motif-based directed network comparison method that captures local, global, and higher-order differences between two directed networks. Specifically, we first construct a motif distribution vector for each node, which captures the information of a node's involvement in different directed motifs. Then, the dissimilarity between two directed networks is defined on the basis of a matrix which is composed of the motif distribution vector of every node and Jensen-Shannon divergence. The performance of our method is evaluated via the comparison of six real directed networks with their null models as well as their perturbed networks based on edge perturbation. Our method is superior to the state-of-the-art baselines and is robust with different parameter settings.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.