Showing 1–50 of 1,522 results for author: Liu, Y

Light Dark Matter Constraints from SuperCDMS HVeV Detectors Operated Underground with an Anticoincidence Event Selection

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. Alonso-González, D. W. P. Amaral, J. Anczarski, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, C. Bathurst, R. Bhattacharyya, A. J. Biffl, P. L. Brink, M. Buchanan, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, J. -H. Chen , et al. (115 additional authors not shown)

Abstract: This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon k… ▽ More This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon kinetic mixing and axion-like particle axioelectric coupling for masses between 1.2 and 23.3 eV/$c^2$. Compared to an earlier HVeV search, sensitivity was improved as a result of an increased overburden of 225 meters of water equivalent, an anticoincidence event selection, and better pile-up rejection. In the case of dark-matter-electron scattering via a heavy mediator, an improvement by up to a factor of 25 in cross-section sensitivity was achieved. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 7 pages + title and references, 4 figures, and 1 table

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σしぐま$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Electrically Tuning Quasi-Bound States in the Continuum with Hybrid Graphene-Silicon Metasurfaces

Authors: Ziqiang Cai, Xianzhe Zhang, Tushar Sanjay Karnik, Yihao Xu, Tae Yoon Kim, Juejun Hu, Yongmin Liu

Abstract: Metasurfaces have become one of the most prominent research topics in the field of optics owing to their unprecedented properties and novel applications on an ultrathin platform. By combining graphene with metasurfaces, electrical tunable functions can be achieved with fast tuning speed, large modulation depth and broad tuning range. However, the tuning efficiency of hybrid graphene metasurfaces w… ▽ More Metasurfaces have become one of the most prominent research topics in the field of optics owing to their unprecedented properties and novel applications on an ultrathin platform. By combining graphene with metasurfaces, electrical tunable functions can be achieved with fast tuning speed, large modulation depth and broad tuning range. However, the tuning efficiency of hybrid graphene metasurfaces within the short-wavelength infrared (SWIR) spectrum is typically low because of the small resonance wavelength shift in this wavelength range. In this work, through the integration of graphene and silicon metasurfaces that support quasi-bound states in the continuum (quasi-BIC), we experimentally demonstrate significant transmittance tuning even with less than 30 nm resonance wavelength shift thanks to the high quality-factor of quasi-BIC metasurfaces. The tunable transmittance spectrum was measured using Fourier Transform Infrared Spectroscopy (FTIR) with a modified reflective lens to improve the accuracy, and the electrical tuning was realized utilizing the cut-and-stick method of ion gel. At the wavelength of 3.0 um, the measured change of transmittance T_max-T_min and modulation depth (T_max-T_min)/T_max can reach 22.2% and 28.9%, respectively, under a small bias voltage ranging from -2 V to +2 V. To the best of our knowledge, this work is the first experimental demonstration of tunable graphene/quasi-BIC metasurfaces, which have potential applications in optical modulation, reconfigurable photonic devices, and optical communications. △ Less

Submitted 9 July, 2024; originally announced July 2024.

Comments: 14 pages, 5 figures

Analytical Aberration Theory for Plane-symmetric Optical Systems and its Application in the Analysis of Distortion in Freeform Spectrometers

Authors: Yuxuan Liu

Abstract: The recent history of optical design saw a progressive trend of also designing without rotational symmetry, especially spectrometers due to the use of reflective and diffractive elements in their designs. A freeform hyperspectral imager design in CubeSat format is presented in this work, which has large deviation from rotational symmetry. Based on a generalization of paraxial optics and wavefront… ▽ More The recent history of optical design saw a progressive trend of also designing without rotational symmetry, especially spectrometers due to the use of reflective and diffractive elements in their designs. A freeform hyperspectral imager design in CubeSat format is presented in this work, which has large deviation from rotational symmetry. Based on a generalization of paraxial optics and wavefront aberration expansion applicable to plane-symmetric systems, in this dissertation we derived the aberration coefficients of aberration types in the third group for plane-symmetric systems that include the second order effects of the light beam footprint on optical surfaces. We also expanded the theory to include the contributions from freeform surfaces and induced aberrations. For the application to plane-symmetric spectrometers, the aberration coefficients related to distortion are of special interest. Comparisons between the distortion results predicted by the aberration coefficients and simulated from real raytracing show good consistency in example systems of a Dyson spectrometer and freeform spectrometers that share the three-mirror double-pass structure, which is similar to the spectrometer component of the hyperspectral imager we designed. In comparison to real raytracing, results of the theory applied to the spectrometer of the hyperspectral imager we designed show the limits of the theory that is limited to the third group of aberrations, while in this design, high-order groups also significantly contribute. In all cases, the analytical formulae of the aberration coefficients contain the information on surface contributions, induced aberrations, and the relation between the aberration behavior and system parameters, which provide valuable insights in the analysis of plane-symmetric systems. △ Less

Submitted 8 July, 2024; originally announced July 2024.

Comments: Doctoral Dissertation

Barium Titanate and Lithium Niobate Permittivity and Pockels Coefficients from MHz to Sub-THz Frequencies

Authors: Daniel Chelladurai, Manuel Kohli, Joel Winiger, David Moor, Andreas Messner, Yuriy Fedoryshyn, Mohammed Eleraky, Yuqi Liu, Hua Wang, Juerg Leuthold

Abstract: The Pockels effect is essential for controlling optical signals at the highest speeds. We present the first measurements of the Pockels coefficients and permittivity in lithium niobate (LN) and barium titanate (BTO) over a continuous frequency range from 100 MHz to 330 GHz. These properties are constant across this frequency range in LN but have a significant frequency dependence in BTO. Still, ou… ▽ More The Pockels effect is essential for controlling optical signals at the highest speeds. We present the first measurements of the Pockels coefficients and permittivity in lithium niobate (LN) and barium titanate (BTO) over a continuous frequency range from 100 MHz to 330 GHz. These properties are constant across this frequency range in LN but have a significant frequency dependence in BTO. Still, our measurements show that BTO ($\varepsilon$ = 1136, $r_{42}$ = 481 pm/V, $r_{33}$ = 125 pm/V at 100 MHz, $\varepsilon$ = 453, $r_{42}$ = 191 pm/V, $r_{33}$ = 60 pm/V at 330 GHz) has remarkably large electro-optic properties compared to LN ($\varepsilon$ = 27, $r_{42}$ = 15 pm/V, $r_{33}$ = 27 pm/V). Furthermore, we show how BTO devices can be designed with a flat electro-optic frequency response despite the Pockels coefficient dispersion. Finally, we expound our method for broadband characterization of these vital electro-optic properties, utilizing specialized integrated electro-optic phase shifters. Altogether, this work is foundational to designing high-speed BTO devices and to developing new electro-optic materials. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: Main Text: 19 pages, 5 figures. Supplementary Information: 18 pages, 10 figures

Observation of Co-propagating Chiral Zero Modes in Magnetic Photonic Crystals

Authors: Zhongfu Li, Shaojie Ma, Shuwei Li, Oubo you, Yachao Liu, Qingdong Yang, Yuanjiang Xiang, Peiheng Zhou, Shuang Zhang

Abstract: Topological singularities, such as Weyl points and Dirac points, can give rise to unidirectional propagation channels known as chiral zero modes (CZMs) when subject to a magnetic field. These CZMs are responsible for intriguing phenomena like the chiral anomaly in quantum systems. The propagation direction of each CZM is determined by both the applied magnetic field and the topological charge of t… ▽ More Topological singularities, such as Weyl points and Dirac points, can give rise to unidirectional propagation channels known as chiral zero modes (CZMs) when subject to a magnetic field. These CZMs are responsible for intriguing phenomena like the chiral anomaly in quantum systems. The propagation direction of each CZM is determined by both the applied magnetic field and the topological charge of the singularity point. While counter-propagating CZMs have been observed in 2D and 3D systems, the realization of co-propagating CZMs has remained elusive. Here we present the first experimental observation of co-propagating CZMs in magnetic photonic crystals hosting a single pair of ideal Weyl points WPs. By manipulating the crystal's structural configuration, we spatially alter the locations of the WPs, creating pseudo-magnetic fields in opposite directions between them. This arrangement results in a pair of CZMs that possess the same group velocity and co-propagate. Our work opens up new possibilities for topological manipulation of wave propagation and may lead to advancements in optical waveguides, switches, and various other applications. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 6 pages, 5 figures

Visible, Near-, and Mid-infrared Computational Spectrometer Enabled by Single-Spinning Film Encoder

Authors: Junren Wen, Weiming Shi, Cheng Gao, Yujie Liu, Shuaibo Feng, Yu Shao, Haiqi Gao, Yuchuan Shao, Yueguang Zhang, Weidong Shen, Chenying Yang

Abstract: Computational spectrometers are pivotal in enabling low-cost, in-situ and rapid spectral analysis, with potential applications in chemistry, biology, and environmental science. However, filter-based spectral encoding approaches typically use filter arrays, complicating the manufacturing process and hindering device consistency. By capitalizing on the polarization separation effect under oblique in… ▽ More Computational spectrometers are pivotal in enabling low-cost, in-situ and rapid spectral analysis, with potential applications in chemistry, biology, and environmental science. However, filter-based spectral encoding approaches typically use filter arrays, complicating the manufacturing process and hindering device consistency. By capitalizing on the polarization separation effect under oblique incidence (PSEOI), we pioneer the use of a single filter for highly efficient spectral encoding, and propose a novel computational spectrometer spanning visible to mid-infrared wavelengths by combining the Single-Spinning Film Encoder (SSFE) with deep learning-based reconstruction algorithm. The particle swarm optimization (PSO) method is employed to optimize the film configuration of SSFE, achieving low-correlation and high-complexity spectral responses under different polarizations and spinning angles, thereby enhancing both spectral resolution and accuracy of reconstruction across diverse spectral ranges. Spectral resolutions up to 0.5 nm, 2 nm, 10 nm can be realized for single-peak narrowband spectra, and 3 nm, 6 nm, 20 nm for dual-peak narrowband spectra, over the visible, near-, and mid-infrared wavelength ranges, respectively. Moreover, the proposed spectrometer demonstrates an overall 81.38% precision for the classification of 220 chemical compounds, confirming its robustness and precision in practical scenarios, along with the capability for compact, cost-effective spectroscopic solutions. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Dielectric Fano Nanoantennas for Enabling Sub-Nanosecond Lifetimes in NV-based Single Photon Emitters

Authors: Shu An, Dmitry Kalashnikov, Wenqiao Shi, Zackaria Mahfoud, Ah Bian Chew, Yan Liu, Jing Wu, Di Zhu, Weibo Gao, Cheng-Wei Qiu, Victor Leong, Zhaogang Dong

Abstract: Solid-state quantum emitters are essential sources of single photons, and enhancing their emission rates is of paramount importance for applications in quantum communications, computing, and metrology. One approach is to couple quantum emitters with resonant photonic nanostructures, where the emission rate is enhanced due to the Purcell effect. Dielectric nanoantennas are promising as they provide… ▽ More Solid-state quantum emitters are essential sources of single photons, and enhancing their emission rates is of paramount importance for applications in quantum communications, computing, and metrology. One approach is to couple quantum emitters with resonant photonic nanostructures, where the emission rate is enhanced due to the Purcell effect. Dielectric nanoantennas are promising as they provide strong emission enhancement compared to plasmonic ones, which suffer from high Ohmic loss. Here, we designed and fabricated a dielectric Fano resonator based on a pair of silicon (Si) ellipses and a disk, which supports the mode hybridization between quasi-bound-states-in-the-continuum (quasi-BIC) and Mie resonance. We demonstrated the performance of the developed resonant system by interfacing it with single photon emitters (SPEs) based on nitrogen-vacancy (NV-) centers in nanodiamonds (NDs). We observed that the interfaced emitters have a Purcell enhancement factor of ~10, with sub-ns emission lifetime and a polarization contrast of 9. Our results indicate a promising method for developing efficient and compact single-photon sources for integrated quantum photonics applications. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 20 pages, 4 figures

Broadband planar electromagnetic hyper-lens with uniform magnification in air

Authors: Ran Sun, Fei Sun, Hanchuan Chen, Yichao Liu, Qi Wang

Abstract: A planar hyper-lens, capable of creating sub-wavelength imaging for broadband electromagnetic wave, is designed based on electromagnetic null medium. Subsequently, a scheme for the implementation of the proposed hyper-lens is given by using well-designed flexural metal plates, which function as the reduced electromagnetic null medium for TM-polarized microwaves. Both simulated and measured results… ▽ More A planar hyper-lens, capable of creating sub-wavelength imaging for broadband electromagnetic wave, is designed based on electromagnetic null medium. Subsequently, a scheme for the implementation of the proposed hyper-lens is given by using well-designed flexural metal plates, which function as the reduced electromagnetic null medium for TM-polarized microwaves. Both simulated and measured results verify that the hyper-lens designed with flexural metal plates can achieve super-resolution imaging for microwave at operating wavelength (λらむだ0=3cm) with a resolution of 0.25λ0 and a uniform magnification of about 5. Moreover, the designed hyper-lens ensures that both the object and image surfaces are planes, and simultaneously provides a uniform magnification for objects in different positions. Additionally, the proposed hyper-lens offers a broadband super-resolution imaging capabilities, achieving good super-resolution imaging effects for microwave frequencies ranging from 8.5 to 11 GHz. The proposed hyper-lens may find applications in high precision imaging, detection, and sensing. △ Less

Submitted 1 July, 2024; originally announced July 2024.

The Nash-MTL-STCN for Prestack Three-Parameter Inversion

Authors: Yingtian Liu, Yong Li, Huating Li, Junheng Peng, Zhangquan Liao, Wen Feng

Abstract: Deep learning (DL) techniques have been widely used in prestack three-parameter inversion to address its ill-posed problems. Among these DL techniques, Multi-task learning (MTL) methods can simultaneously train multiple tasks, thereby enhancing model generalization and predictive performance. However, existing MTL methods typically adopt heuristic or non-heuristic approaches to jointly update the… ▽ More Deep learning (DL) techniques have been widely used in prestack three-parameter inversion to address its ill-posed problems. Among these DL techniques, Multi-task learning (MTL) methods can simultaneously train multiple tasks, thereby enhancing model generalization and predictive performance. However, existing MTL methods typically adopt heuristic or non-heuristic approaches to jointly update the gradient of each task, leading to gradient conflicts between different tasks and reducing inversion accuracy. To address this issue, we propose a semi-supervised temporal convolutional network (STCN) based on Nash equilibrium (Nash-MTL-STCN). Firstly, temporal convolutional networks (TCN) with non-causal convolution and convolutional neural networks (CNNs) are used as multi-task layers to extract the shared features from partial angle stack seismic data, with CNNs serving as the single-task layer. Subsequently, the feature mechanism is utilized to extract shared features in the multi-task layer through hierarchical processing, and the gradient combination of these shared features is treated as a Nash game for strategy optimization and joint updates. Ultimately, the overall utility of the three-parameter is maximized, and gradient conflicts are alleviated. In addition, to enhance the network's generalization and stability, we have incorporated geophysical forward modeling and low-frequency models into the network. Experimental results demonstrate that the proposed method overcomes the gradient conflict issue of the conventional MTL methods with constant weights (CW) and achieves higher precision than four widely used non-heuristic MTL methods. Further field data experiments also validate the method's effectiveness. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Comments: This manuscript has been submitted to Geophysics for reviewing

MSC Class: 86-10 ACM Class: I.2.6; I.6.4

Nonvolatile Silicon Photonic MEMS Switch Based on Centrally-Clamped Stepped Bistable Mechanical Beams

Authors: Qian Ma, Yinpeng Hu, Ye Lu, Yunzhi Liu, Huan Li, Daoxin Dai

Abstract: High-performance photonic switches are essential for large-scale optical routing for AI large models and Internet of things. Realizing nonvolatility can further reduce power consumption and expand application scenarios. We propose a nonvolatile 2*2 silicon photonic micro-electromechanical system (MEMS) switch compatible with standard silicon photonic foundry processes. The switch employs electrost… ▽ More High-performance photonic switches are essential for large-scale optical routing for AI large models and Internet of things. Realizing nonvolatility can further reduce power consumption and expand application scenarios. We propose a nonvolatile 2*2 silicon photonic micro-electromechanical system (MEMS) switch compatible with standard silicon photonic foundry processes. The switch employs electrostatic comb actuator to change the air gap of the compact horizontal adiabatic coupler and achieves nonvolatility with centrally-clamped stepped bistable mechanical beams. The photonic switch features a 10s us-scale switching speed and a 10s fJ-scale simulated switching energy within a 100*100 um2 footprint, with <=26 V driving voltages. This 2*2 switch can be used in a variety of topologies for large-scale photonic switches, and its nonvolatility can potentially support future photonic FPGA designs. △ Less

Submitted 2 July, 2024; v1 submitted 19 June, 2024; originally announced July 2024.

The Belle II Detector Upgrades Framework Conceptual Design Report

Authors: H. Aihara, A. Aloisio, D. P. Auguste, M. Aversano, M. Babeluk, S. Bahinipati, Sw. Banerjee, M. Barbero, J. Baudot, A. Beaubien, F. Becherer, T. Bergauer, F. U. Bernlochner., V. Bertacchi, G. Bertolone, C. Bespin, M. Bessner, S. Bettarini, A. J. Bevan, B. Bhuyan, M. Bona, J. F. Bonis, J. Borah, F. Bosi, R. Boudagga , et al. (186 additional authors not shown)

Abstract: We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive wit… ▽ More We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive with the LHC and other experiments. △ Less

Submitted 4 July, 2024; v1 submitted 26 June, 2024; originally announced June 2024.

Comments: Editor: F. Forti 170 pages

Report number: KEK-REPORT-2024-1, BELLE2-REPORT-2024-042

Preparation of Sol-Gel Random Micro Lens Array

Authors: Fanru Kong, Chuanzhu Cheng, Yuqing Liu

Abstract: The structure of random micro lens array (rMLA) breaks the periodicity of micro lens array (MLA), suppressing coherence in the homogenization process, thereby achieving better spot homogenization effects. Sol-gel rMLA exhibits strong adaptability and high laser tolerance, making it valuable for laser beam control applications. However, the cracking tendency during the drying process of sol-gel is… ▽ More The structure of random micro lens array (rMLA) breaks the periodicity of micro lens array (MLA), suppressing coherence in the homogenization process, thereby achieving better spot homogenization effects. Sol-gel rMLA exhibits strong adaptability and high laser tolerance, making it valuable for laser beam control applications. However, the cracking tendency during the drying process of sol-gel is a challenge. This paper successfully prepares sol-gel random micro lens arrays through nanoimprint lithography, thoroughly analyzing the cracking mechanism and resolving the cracking issue during the drying process of sol-gel. The manufactured sol-gel random micro lenses exhibit good surface profile accuracy, uniformity, and excellent light source shaping effects. The energy utilization efficiency of various types of rMLA is approximately 90%, with rectangular and hexagonal rMLAs achieving uniformity of light spots of over 80%. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Low Excess Noise, High Quantum Efficiency Avalanche Photodiodes for Beyond 2 μみゅーm Wavelength Detection

Authors: Hyemin Jung, Seunghyun Lee, Xiao Jin, Yifan Liu, Theodore J. Ronningen, Christoph H. Grein, John P. R. David, Sanjay Krishna

Abstract: The increasing concentration of greenhouse gases, notably CH4 and CO2, has fueled global temperature increases, intensifying concerns regarding the prevailing climate crisis. Effectively monitoring these gases demands a detector spanning the extended short-wavelength infrared (~2.4 μみゅーm) range, covering wavelengths of CH4 (1.65 μみゅーm) and CO2 (2.05 μみゅーm). The state-of-the-art HgCdTe avalanche photodetect… ▽ More The increasing concentration of greenhouse gases, notably CH4 and CO2, has fueled global temperature increases, intensifying concerns regarding the prevailing climate crisis. Effectively monitoring these gases demands a detector spanning the extended short-wavelength infrared (~2.4 μみゅーm) range, covering wavelengths of CH4 (1.65 μみゅーm) and CO2 (2.05 μみゅーm). The state-of-the-art HgCdTe avalanche photodetectors (APDs) offer exceptional performance metrics, including high gain (M) and low excess noise (F). However, their widespread adoption is hindered by inherent challenges such as manufacturability, reproducibility, and cost factors. Moreover, their reliance on cryogenic cooling adds to the cost, size, weight, and power of the system. We have demonstrated a linear mode APD combining an InGaAs/GaAsSb type-II superlattice absorber and an AlGaAsSb multiplier lattice matched to InP substrates. This APD has demonstrated a room temperature M of 178, a maximum measurable external quantum efficiency of 3560 % at 2 μみゅーm, an extremely low excess noise (F < 2 at M < 20), and a small temperature coefficient of breakdown (7.58 mV/K μみゅーm). Such a high performance APD with manufacturable semiconductor materials could lead to a rapid transition to a commercial III-V foundry, holding the promise of revolutionizing high-sensitivity receivers for greenhouse gas monitoring. △ Less

Submitted 25 June, 2024; originally announced June 2024.

General Guide Concepts for Compact, High-Brilliance Neutron Moderators

Authors: Yaohua Liu

Abstract: The trend in neutron sciences is toward integrating compact, high-brightness moderators into new or upgraded facilities. Transporting neutrons from the source to the sample position with a phase-space distribution tailored to specific requirements is crucial to leverage high source brilliance. We have investigated four guide concepts using Monte Carlo ray tracing simulations: Montel beamline with… ▽ More The trend in neutron sciences is toward integrating compact, high-brightness moderators into new or upgraded facilities. Transporting neutrons from the source to the sample position with a phase-space distribution tailored to specific requirements is crucial to leverage high source brilliance. We have investigated four guide concepts using Monte Carlo ray tracing simulations: Montel beamline with nested Kirkpatrick-Baez mirrors, curved-tapered beamline with a bender and straight sections, straight-elliptical beamline, and curved-elliptical beamline. The straight-elliptical (curved-elliptical) beamline features two half-ellipse guides connected by a straight (non-straight) guide section. The neutron transport efficiency and phase space homogeneity have been quantitatively compared. Our results show that the straight-elliptical beamline performs best because of few neutron bounces on the guide surface with small reflection angles, minimizing flux loss. The Montel beamline provides the best spatial confinement of neutrons within the desired region; however, there is a high thermal-neutron loss due to large reflection angles. The curved-tapered beamline suffers from significant flux loss due to high bounces, and it shows a non-uniform angular distribution related to broad ranges of bounces and reflection angles. The non-straight guide section of the curved-elliptical beamline increases phase space inhomogeneity, leading to a spatially non-uniform beam profile. The results apply to general neutron instruments that require transporting thermal and cold neutrons from a compact, high-brilliance moderator to the sample location with a moderate phase-space volume. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Comments: 30 pages and 14 figures

Likelihood-based inference, identifiability and prediction using count data from lattice-based random walk models

Authors: Yihan Liu, David J Warne, Matthew J Simpson

Abstract: In vitro cell biology experiments are routinely used to characterize cell migration properties under various experimental conditions. These experiments can be interpreted using lattice-based random walk models to provide insight into underlying biological mechanisms, and continuum limit partial differential equation (PDE) descriptions of the stochastic models can be used to efficiently explore mod… ▽ More In vitro cell biology experiments are routinely used to characterize cell migration properties under various experimental conditions. These experiments can be interpreted using lattice-based random walk models to provide insight into underlying biological mechanisms, and continuum limit partial differential equation (PDE) descriptions of the stochastic models can be used to efficiently explore model properties instead of relying on repeated stochastic simulations. Working with efficient PDE models is of high interest for parameter estimation algorithms that typically require a large number of forward model simulations. Quantitative data from cell biology experiments usually involves non-negative cell counts in different regions of the experimental images, and it is not obvious how to relate finite, noisy count data to the solutions of continuous PDE models that correspond to noise-free density profiles. In this work we illustrate how to develop and implement likelihood-based methods for parameter estimation, parameter identifiability and model prediction for lattice-based models describing collective migration with an arbitrary number of interacting subpopulations. We implement a standard additive Gaussian measurement error model as well as a new physically-motivated multinomial measurement error model that relates noisy count data with the solution of continuous PDE models. Both measurement error models lead to similar outcomes for parameter estimation and parameter identifiability, whereas the standard additive Gaussian measurement error model leads to non-physical prediction outcomes. In contrast, the new multinomial measurement error model involves a lower computational overhead for parameter estimation and identifiability analysis, as well as leading to physically meaningful model predictions. △ Less

Submitted 23 June, 2024; originally announced June 2024.

Comments: 34 pages, 7 figures

MSC Class: 92B99; 82M99; 62M99

Percolation transition of k-frequent destinations network for urban mobility

Authors: Weiyu Zhang, Furong Jia, Jianying Wang, Yu Liu, Gezhi Xiu

Abstract: Urban spatial interactions are a complex aggregation of routine visits and random explorations by individuals. The inherent uncertainty of these random visitations poses significant challenges to understanding urban structures and socioeconomic developments. To capture the core dynamics of urban interaction networks, we analyze the percolation structure of the $k$-most frequented destinations of i… ▽ More Urban spatial interactions are a complex aggregation of routine visits and random explorations by individuals. The inherent uncertainty of these random visitations poses significant challenges to understanding urban structures and socioeconomic developments. To capture the core dynamics of urban interaction networks, we analyze the percolation structure of the $k$-most frequented destinations of intracity place-to-place flows from mobile phone data of eight major U.S. cities at a Census Block Group (CBG) level. Our study reveals a consistent percolation transition at $k^* = 130$, a critical threshold for the number of frequently visited destinations necessary to maintain a cohesive urban network. This percolation threshold proves remarkably consistent across diverse urban configurations, sizes, and geographical settings over a 48-month study period, and can largely be interpreted as the joint effect of the emergence of hubness and the level of mixing of residents. Furthermore, we examine the socioeconomic profiles of residents from different origin areas categorized by the fulfillment level of $k^*=130$ principal destinations, revealing a pronounced distinction in the origins' socioeconomic advantages. These insights offer a nuanced understanding of how urban spaces are interconnected and the determinants of travel behavior. Our findings contribute to a deeper comprehension of the structural dynamics that govern urban spatial interactions. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Foundry compatible, efficient wafer-scale manufacturing of ultra-low loss, high-density Si$_3$N$_4$ photonic integrated circuits

Authors: Xinru Ji, Rui Ning Wang, Yang Liu, Johann Riemensberger, Zheru Qiu, Tobias J. Kippenberg

Abstract: Silicon nitride (Si$_3$N$_4$) photonic integrated circuits (PICs) have shown low linear loss, negligible nonlinear loss, and high power handling over traditional silicon photonics. To achieve high-density photonic integration and high effective nonlinearity through tight optical confinement, thick stoichiometric Si$_3$N$_4$ films are indispensable. However, when using low-pressure chemical vapor d… ▽ More Silicon nitride (Si$_3$N$_4$) photonic integrated circuits (PICs) have shown low linear loss, negligible nonlinear loss, and high power handling over traditional silicon photonics. To achieve high-density photonic integration and high effective nonlinearity through tight optical confinement, thick stoichiometric Si$_3$N$_4$ films are indispensable. However, when using low-pressure chemical vapor deposition (LPCVD) to achieve high optical material transparency, Si$_3$N$_4$ films exhibit large tensile stress on the order of GPa. Methods for crack prevention are therefore essential. The photonic Damascene process has addressed this issue, attaining record low loss Si$_3$N$_4$ PICs, but it lacks control of the waveguide height. Conversely, precise waveguide dimension and ultra-low loss have been achieved with subtractive processing, but this method is not compatible with mass production due to the use of electron beam lithography. To date, an outstanding challenge is to attain both lithographic precision and ultra-low loss in high confinement Si$_3$N$_4$ PICs that are compatible with large-scale foundry manufacturing. Here, we present a single-step deposited, DUV-based subtractive method for producing wafer-scale ultra-low loss Si$_3$N$_4$ PICs that harmonize these necessities. By employing deep etching of densely distributed, interconnected trenches into the substrate, we effectively mitigate the tensile stress in the Si$_3$N$_4$ layer, enabling direct deposition of thick films without cracking and substantially prolonged storage duration. Lastly, we identify ultraviolet (UV) radiation-induced damage that can be remedied through rapid thermal annealing. Collectively, we develop ultra-low loss Si$_3$N$_4$ microresonators and 0.5 m-long spiral waveguides with losses down to 1.4 dBでしべる/m at 1550 nm with high production yield. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 2023 Conference on Lasers and Electro-Optics (CLEO). IEEE, 2023

Symmetry engineering in 2D bioelectronics facilitating augmented biosensing interfaces

Authors: Yizhang Wu, Yihan Liu, Yuan Li, Ziquan Wei, Sicheng Xing, Yunlang Wang, Dashuai Zhu, Ziheng Guo, Anran Zhang, Gongkai Yuan, Zhibo Zhang, Ke Huang, Yong Wang, Guorong Wu, Ke Cheng, Wubin Bai

Abstract: Symmetry lies at the heart of 2D bioelectronics, determining material properties at the fundamental level. Breaking the symmetry allows emergent functionalities and effects. However, symmetry modulation in 2D bioelectronics and the resultant applications have been largely overlooked. Here we devise an oxidized architectural MXene, referred as OXene, that couples orbit symmetric breaking with inver… ▽ More Symmetry lies at the heart of 2D bioelectronics, determining material properties at the fundamental level. Breaking the symmetry allows emergent functionalities and effects. However, symmetry modulation in 2D bioelectronics and the resultant applications have been largely overlooked. Here we devise an oxidized architectural MXene, referred as OXene, that couples orbit symmetric breaking with inverse symmetric breaking to entitle the optimized interfacial impedance and Schottky-induced piezoelectric effects. The resulting OXene validates applications ranging from microelectrode arrays, gait analysis, active transistor matrix, and wireless signaling transmission, which enables highly-fidelity signal transmission and reconfigurable logic gates. Further OXene interfaces are investigated in both rodent and porcine myocardium, featuring high-quality and spatiotemporally resolved physiological recordings, while accurate differentiated predictions, enabled via various machine learning pipelines. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Orbit symmetry breaking in MXene implements enhanced soft bioelectronic implants

Authors: Yizhang Wu, Yuan Li, Yihan Liu, Dashuai Zhu, Sicheng Xing, Noah Lambert, Hannah Weisbecker, Siyuan Liu, Brayden Davis, Lin Zhang, Meixiang Wang, Gongkai Yuan, Chris Zhoufan You, Anran Zhang, Cate Duncan, Wanrong Xie, Yihang Wang, Yong Wang, Sreya Kanamurlapudi, Garcia-Guzman Evert, Arjun Putcha, Michael D. Dickey, Ke Huang, Wubin Bai

Abstract: Bioelectronic implants with soft mechanics, biocompatibility, and excellent electrical performance enable biomedical implants to record electrophysiological signals and execute interventions within internal organs, promising to revolutionize the diagnosing, monitoring, and treatment of various pathological conditions. However, challenges remain in improving excessive impedance at the bioelectronic… ▽ More Bioelectronic implants with soft mechanics, biocompatibility, and excellent electrical performance enable biomedical implants to record electrophysiological signals and execute interventions within internal organs, promising to revolutionize the diagnosing, monitoring, and treatment of various pathological conditions. However, challenges remain in improving excessive impedance at the bioelectronic-tissue interface and thus the efficacy of electrophysiological signaling and intervention. Here, we devise orbit symmetry breaking in MXene (a low-cost scalability, biocompatible, and conductive 2D layered material, that we refer to as OBXene), that exhibits low bioelectronic-tissue impedance, originating from the out-of-plane charge transfer. Furthermore, the Schottky-induced piezoelectricity stemming from the asymmetric orbital configuration of OBXene facilitates interlayered charge transport in the device. In this study, we report an OBXene-based cardiac patch applied on the left ventricular epicardium of both rodent and porcine models to enable spatiotemporal epicardium mapping and pacing, while coupling the wireless and battery-free operation for long-term real-time recording and closed-loop stimulation. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Formation of a Magnetic Cloud from the Merging of Two Successive Coronal Mass Ejections

Authors: Chong Chen, Ying D. Liu, Bei Zhu, Huidong Hu, Rui Wang

Abstract: On 2022 March 28 two successive coronal mass ejections (CMEs) were observed by multiple spacecraft and resulted in a magnetic cloud (MC) at 1 AUえーゆー. We investigate the propagation and interaction properties of the two CMEs correlated with the MC using coordinated multi-point remote sensing and in situ observations from Solar Orbiter, STEREO A, SOHO, and Wind. The first CME was triggered by a filament… ▽ More On 2022 March 28 two successive coronal mass ejections (CMEs) were observed by multiple spacecraft and resulted in a magnetic cloud (MC) at 1 AUえーゆー. We investigate the propagation and interaction properties of the two CMEs correlated with the MC using coordinated multi-point remote sensing and in situ observations from Solar Orbiter, STEREO A, SOHO, and Wind. The first CME was triggered by a filament eruption with a high inclination angle. Roughly 9 hr later, the second CME originating from the same active region erupted with a smaller tilt angle and faster speed compared to the first one. The second CME overtook the preceding CME and formed a merged front at approximately 75 \rsun{}, which developed into a complex ejecta at 1 AUえーゆー. The descending speed and low proton temperature inside the complex ejecta suggest that the two CMEs have fully merged before reaching 1 AUえーゆー, leading them to begin expanding rather than compressing against each other. The complex ejecta appears to have the magnetic field and plasma signatures of an MC, although there is a discontinuity in the magnetic field implying previous interactions. The cross section of the complex ejecta, reconstructed from in situ data using a Grad-Shafranov technique, exhibits a right--handed flux rope structure. These results highlight that an MC--like complex ejecta lacking interaction features could arise from the complete merging of two CMEs. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Quantum Networks: from Multipartite Entanglement to Hypergraph Immersion

Authors: Yu Tian, Yuefei Liu, Xiangyi Meng

Abstract: Multipartite entanglement, a higher-order interaction unique to quantum information, offers various advantages over bipartite entanglement in quantum network (QN) applications. Establishing multipartite entanglement across remote parties in QN requires entanglement routing, which irreversibly transforms the QN topology at the cost of existing entanglement links. Here, we address the question of wh… ▽ More Multipartite entanglement, a higher-order interaction unique to quantum information, offers various advantages over bipartite entanglement in quantum network (QN) applications. Establishing multipartite entanglement across remote parties in QN requires entanglement routing, which irreversibly transforms the QN topology at the cost of existing entanglement links. Here, we address the question of whether a QN can be topologically transformed into another via entanglement routing. Our key result is an exact mapping from multipartite entanglement routing to Nash-Williams's graph immersion problem, extended to hypergraphs. This generalized hypergraph immersion problem introduces a partial order between QN topologies, permitting certain topological transformations while precluding others, offering discerning insights into the design and manipulation of higher-order network topologies in QNs. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 8 pages, 3 figures, 1 table

Super-resolution 3D tomography of vector near-fields in dielectric resonators

Authors: Bingbing Zhu, Qingnan Cai, Yaxin Liu, Sheng Zhang, Weifeng Liu, Qiong He, Lei Zhou, Zhensheng Tao

Abstract: All-dielectric optical resonators, exhibiting exotic near-field distributions upon excitations, have emerged as low-loss, versatile and highly adaptable components in nanophotonic structures for manipulating electromagnetic waves and enhancing light-matter interactions. However, achieving experimental full three-dimensional characterization of near-fields within dielectric materials poses signific… ▽ More All-dielectric optical resonators, exhibiting exotic near-field distributions upon excitations, have emerged as low-loss, versatile and highly adaptable components in nanophotonic structures for manipulating electromagnetic waves and enhancing light-matter interactions. However, achieving experimental full three-dimensional characterization of near-fields within dielectric materials poses significant challenges. Here, we develop a novel technique using high-order sideband generation to image near-field wave patterns inside dielectric optical resonators. By exploiting the phase-sensitivity of various harmonic orders that enables the detection of near-field distributions at distinct depths, we realize three-dimensional tomographic and super-resolution near-field imaging inside a micrometer-thick silicon anapole resonator. Furthermore, our method offers high-contrast polarization sensitivity and phase-resolving capability, providing comprehensive vectorial near-field information. Our approach can potentially be applied to diverse dielectric metamaterials, and becomes a valuable tool for comprehensive characterization of near-field wave phenomena within dielectric materials. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 26 pages, 4 figures

Ultrastable vacuum-gap Fabry-Pérot cavities operated in air

Authors: Yifan Liu, Naijun Jin, Dahyeon Lee, Charles McLemore, Takuma Nakamura, Megan Kelleher, Haotian Cheng, Susan Schima, Nazanin Hoghooghi, Scott Diddams, Peter Rakich, Franklyn Quinlan

Abstract: We demonstrate a vacuum-gap ultrastable optical reference cavity that does not require a vacuum enclosure. Our simple method of optical contact bonding in a vacuum environment allows for cavity operation in air while maintaining vacuum between the cavity mirrors. Vacuum is maintained long term, with no observed degradation in cavity stability for over 1 year after bonding. For a 1550 nm laser stab… ▽ More We demonstrate a vacuum-gap ultrastable optical reference cavity that does not require a vacuum enclosure. Our simple method of optical contact bonding in a vacuum environment allows for cavity operation in air while maintaining vacuum between the cavity mirrors. Vacuum is maintained long term, with no observed degradation in cavity stability for over 1 year after bonding. For a 1550 nm laser stabilized to a 9.7 mL in-vacuum bonded cavity, the measured Allan deviation is $2.4\times 10^{-14}$ at 1 s and its phase noise is thermal-noise-limited from 0.1 Hzへるつ to 10 kHzきろへるつ, reaching about -105 dBでしべるc/Hz at 10 kHzきろへるつ offset frequency. This represents the highest stability of any oscillator operated without a vacuum enclosure. Furthermore, we demonstrate a 0.5 mL in-vacuum bonded cavity created using microfabricated mirrors and cavity dicing, with phase noise reaching -95 dBでしべるc/Hz at 10 kHzきろへるつ offset frequency. By relieving the need for high-vacuum enclosures, we greatly enhance the portability and utility of low noise, compact cavity-stabilized lasers, with applications ranging from environmental sensing to mobile optical clocks to ultralow noise microwave generation. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 10 pages, 6 figures

Design and Performance of a Magnetic Bottle Electron Spectrometer for High-Energy Photoelectron Spectroscopy

Authors: Kurtis Borne, Jordan T ONeal, Jun Wang, Erk Isele, Razib Obaid, Nora Berrah, Xinxin Cheng, Philip H Bucksbaum, Justin James, Andri Kamalov, Kirk A Larsen, Xiang Li, Ming-Fu Lin, Yusong Liu, Agostino Marinelli, Adam Summers, Emily Thierstein, Thomas Wolf, Daniel Rolles, Peter Walter, James P Cryan, Taran Driver

Abstract: We describe the design and performance of a magnetic bottle electron spectrometer~(MBES) for high-energy electron spectroscopy. Our design features a ${\sim2}$~m long electron drift tube and electrostatic retardation lens, achieving sub-electronvolt (eV) electron kinetic energy resolution for high energy (several hundred eV) electrons with close to 4$πぱい$ collection efficiency. A segmented anode… ▽ More We describe the design and performance of a magnetic bottle electron spectrometer~(MBES) for high-energy electron spectroscopy. Our design features a ${\sim2}$~m long electron drift tube and electrostatic retardation lens, achieving sub-electronvolt (eV) electron kinetic energy resolution for high energy (several hundred eV) electrons with close to 4$πぱい$ collection efficiency. A segmented anode electron detector enables the simultaneous collection of photoelectron spectra in high resolution and high collection efficiency modes. This versatile instrument is installed at the TMO endstation at the LCLS x-ray free-electron laser (XFEL). In this paper, we demonstrate its high resolution, collection efficiency and spatial selectivity in measurements where it is coupled to an XFEL source. These combined characteristics are designed to enable high-resolution time-resolved measurements using x-ray photoelectron, absorption, and Auger-Meitner spectroscopy. We also describe the pervasive artifact in MBES time-of-flight spectra that arises from a periodic modulation in electron detection efficiency, and present a robust analysis procedure for its removal. △ Less

Submitted 4 July, 2024; v1 submitted 18 June, 2024; originally announced June 2024.

Technical design report for the CODEX-$βべーた$ demonstrator

Authors: CODEX-b collaboration, :, Giulio Aielli, Juliette Alimena, James Beacham, Eli Ben Haim, Andras Burucs, Roberto Cardarelli, Matthew Charles, Xabier Cid Vidal, Albert De Roeck, Biplab Dey, Silviu Dobrescu, Ozgur Durmus, Mohamed Elashri, Vladimir Gligorov, Rebeca Gonzalez Suarez, Thomas Gorordo, Zarria Gray, Conor Henderson, Louis Henry, Philip Ilten, Daniel Johnson, Jacob Kautz, Simon Knapen , et al. (28 additional authors not shown)

Abstract: The CODEX-$βべーた$ apparatus is a demonstrator for the proposed future CODEX-b experiment, a long-lived-particle detector foreseen for operation at IP8 during HL-LHC data-taking. The demonstrator project, intended to collect data in 2025, is described, with a particular focus on the design, construction, and installation of the new apparatus. The CODEX-$βべーた$ apparatus is a demonstrator for the proposed future CODEX-b experiment, a long-lived-particle detector foreseen for operation at IP8 during HL-LHC data-taking. The demonstrator project, intended to collect data in 2025, is described, with a particular focus on the design, construction, and installation of the new apparatus. △ Less

Submitted 22 May, 2024; originally announced June 2024.

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Gateway to all-optical spin switching in Heusler ferrimagnets: Pancharatnam-Berry tensor and magnetic moment ratio

Authors: G. P. Zhang, Y. Q. Liu, M. S. Si, Nicholas Allbritton, Y. H. Bai, Wolfgang Hübner, Thomas F. George

Abstract: All-optical spin switching (AOS) is a new phenomenon found in a small group of magnetic media, where a single laser pulse can switch spins from one direction to another, without assistance of a magnetic field, on a time scale much shorter than existing magnetic technology. However, despite intensive efforts over a decade, its underlying working principle remains elusive. Here through manganese-bas… ▽ More All-optical spin switching (AOS) is a new phenomenon found in a small group of magnetic media, where a single laser pulse can switch spins from one direction to another, without assistance of a magnetic field, on a time scale much shorter than existing magnetic technology. However, despite intensive efforts over a decade, its underlying working principle remains elusive. Here through manganese-based Heusler ferrimagnets, we show that a group of flat bands around the Fermi level act as gateway states to form efficient channels or spin switching, where their noncentrosymmetry allows us to correlate the spin dynamics to the second-order optical response. To quantify their efficacy, we introduce the third-rank Pancharatnam-Berry tensor (PB tensor), $\boldsymbolηいーた^{(3)}=\langle i |{\bf p} |m\rangle \langle m|{\bf p} |f\rangle \langle f|{\bf p} |i\rangle,$ where $|i\rangle$, $|m\rangle$ and $|f\rangle$ are initial, intermediate and final band states, respectively, and ${\bf p}$ is the momentum operator. A picture emerges: Those which show AOS, such as the recently discovered Mn$_2$RuGa, always have a large PB tensor element} but have a small sublattice spin moment ratio, consistent with the prior experimental small remanence criterion. This does not only reveal that the delicate balance between the large PB tensor element and the small sublattice spin ratio plays a decisive role in AOS, but also, conceptually, connects the $n$th-order nonlinear optics to $(n+1)$th-rank PB tensors in general. △ Less

Submitted 16 June, 2024; originally announced June 2024.

Comments: 20 pages, four figures. Published in Physical Review B Letters

Resilience patterns in higher-order meta-population networks

Authors: Yanyi Nie, Yanbing Liu, Qixuan Cao, Tao Lin, Wei Wang

Abstract: Meta-population networks are effective tools for capturing population movement across distinct regions, but the assumption of well-mixed regions fails to capture the reality of population higher-order interactions. As a multidimensional system capturing mobility characteristics, meta-population networks are inherently complex and difficult to interpret when subjected to resilience analysis based o… ▽ More Meta-population networks are effective tools for capturing population movement across distinct regions, but the assumption of well-mixed regions fails to capture the reality of population higher-order interactions. As a multidimensional system capturing mobility characteristics, meta-population networks are inherently complex and difficult to interpret when subjected to resilience analysis based on N-dimensional equations. We propose a higher-order meta-population model that captures large-scale global cross-regional mobility and small-scale higher-order interactions within regions. Remarkably, we extend the dimension-reduction approach, simplifying the N-dimensional higher-order meta-population system into a one-dimensional equation by decomposing different network behaviours into a single universal resilience function, thereby allowing for convenient and accurate prediction of the system resilience. The network structure and human mobility parameters can clearly and simply express the epidemic threshold. Numerical experimental results on both real networks and star networks confirm the accuracy of the proposed dimension-reduction framework in predicting the evolution of epidemic dynamics on higher-order meta-population networks. Additionally, higher-order interactions among populations are shown to lead to explosive growth in the epidemic infection size potentially. Population mobility causes changes in the spatial distribution of infectious diseases across different regions. △ Less

Submitted 15 June, 2024; originally announced June 2024.

Simulation Models for Exploring Magnetic Reconnection

Authors: Michael Shay, Subash Adhikari, Naoki Beesho, Joachim Birn, Jorg Buechner, Paul Cassak, Li-Jen Chen, Yuxi Chen, Giulia Cozzani, Jim Drake, Fan Guo, Michael Hesse, Neeraj Jain, Yann Pfau-Kempf, Yu Lin, Yi-Hsin Liu, Mitsuo Oka, Yuri A. Omelchenko, Minna Palmroth, Oreste Pezzi, Patricia H. Reiff, Marc Swisdak, Frank Toffoletto, Gabor Toth, Richard A. Wolf

Abstract: Simulations have played a critical role in the advancement of our knowledge of magnetic reconnection. However, due to the inherently multiscale nature of reconnection, it is impossible to simulate all physics at all scales. For this reason, a wide range of simulation methods have been crafted to study particular aspects and consequences of magnetic reconnection. This chapter reviews many of these… ▽ More Simulations have played a critical role in the advancement of our knowledge of magnetic reconnection. However, due to the inherently multiscale nature of reconnection, it is impossible to simulate all physics at all scales. For this reason, a wide range of simulation methods have been crafted to study particular aspects and consequences of magnetic reconnection. This chapter reviews many of these methods, laying out critical assumptions, numerical techniques, and giving examples of scientific results. Plasma models described include magnetohydrodynamics (MHD), Hall MHD, Hybrid, kinetic particle-in-cell (PIC), kinetic Vlasov, Fluid models with embedded PIC, Fluid models with direct feedback from energetic populations, and the Rice Convection Model (RCM). △ Less

Submitted 9 June, 2024; originally announced June 2024.

Comments: Chapter 5.2 of ISSI Book on Magnetic Reconnection, submitted to Space Science Reviews

The lens was fabricated by fluidic shaping

Authors: Chuanzhu Cheng, Fanru Kong, Yuqing Liu

Abstract: As an important optical component, lens is widely used in scientific inquiry and production. At present, lens manufacturing mainly relies on grinding, polishing and other methods. However, these methods often require expensive equipment and complex processes. This paper presents a method of injecting liquid material into the frame structure and curing it quickly. At the same time, based on the pri… ▽ More As an important optical component, lens is widely used in scientific inquiry and production. At present, lens manufacturing mainly relies on grinding, polishing and other methods. However, these methods often require expensive equipment and complex processes. This paper presents a method of injecting liquid material into the frame structure and curing it quickly. At the same time, based on the principle of energy minimization, we give a set of theory that can accurately predict the lens face shape, and give the simulation results by software. In this paper, 3D printing technology was used to produce different shapes of borders, which were used to produce free-form surface and spherical lens samples. By characterizing their surface contours and optical properties, the practicability of the method was verified. This method has the advantages of low cost, fast forming, high surface smoothness, and can theoretically prepare any size aperture lens, which has great potential for development. △ Less

Submitted 7 June, 2024; originally announced June 2024.

An investigation of anisotropy in the bubbly turbulent flow via direct numerical simulations

Authors: Xuanwei Zhang, Yanchao Liu, Wenkang Wang, Guang Yang, Xu Chu

Abstract: This study explores the dynamics of dispersed bubbly turbulent flow in a channel using interface-resolved direct numerical simulation (DNS) with an efficient Coupled Level-Set Volume-of-Fluid (CLSVOF) solver. The influence of number of bubbles (96 and 192), flow direction, and Eotvos number was examined across eight distinct cases. The results indicate that in upward flows, bubbles tend to accumul… ▽ More This study explores the dynamics of dispersed bubbly turbulent flow in a channel using interface-resolved direct numerical simulation (DNS) with an efficient Coupled Level-Set Volume-of-Fluid (CLSVOF) solver. The influence of number of bubbles (96 and 192), flow direction, and Eotvos number was examined across eight distinct cases. The results indicate that in upward flows, bubbles tend to accumulate near the wall, with smaller Eotvos numbers bringing them closer to the wall and enhancing energy dissipation through increased turbulence and vorticity. This proximity causes the liquid phase velocity to attenuate, and the bubbles, being more spherical, induce more isotropic turbulence. Conversely, in downward flows, bubbles cluster in the middle of the channel and induce additional pseudo-turbulence in the channel center, which induce additional turbulent kinetic energy in the channel center. The study further examines budget of Turbulent Kinetic Energy (TKE) and the exact balance equation for the Reynolds stresses, revealing that near-wall bubble motion generates substantial velocity gradients, particularly in the wall-normal direction, significantly impacting the turbulence structure. △ Less

Submitted 6 June, 2024; originally announced June 2024.

Ohm's Law, the Reconnection Rate, and Energy Conversion in Collisionless Magnetic Reconnection

Authors: Yi-Hsin Liu, Michael Hesse, Kevin Genestreti, Rumi Nakamura, Jim Burch, Paul Cassak, Naoki Bessho, Jonathan Eastwood, Tai Phan, Marc Swisdak, Sergio Toledo-Redondo, Masahiro Hoshino, Cecilia Norgren, Hantao Ji, TKM Nakamura

Abstract: Magnetic reconnection is a ubiquitous plasma process that transforms magnetic energy into particle energy during eruptive events throughout the universe. Reconnection not only converts energy during solar flares and geomagnetic substorms that drive space weather near Earth, but it may also play critical roles in the high energy emissions from the magnetospheres of neutron stars and black holes. In… ▽ More Magnetic reconnection is a ubiquitous plasma process that transforms magnetic energy into particle energy during eruptive events throughout the universe. Reconnection not only converts energy during solar flares and geomagnetic substorms that drive space weather near Earth, but it may also play critical roles in the high energy emissions from the magnetospheres of neutron stars and black holes. In this review article, we focus on collisionless plasmas that are most relevant to reconnection in many space and astrophysical plasmas. Guided by first-principles kinetic simulations and spaceborne in-situ observations, we highlight the most recent progress in understanding this fundamental plasma process. We start by discussing the non-ideal electric field in the generalized Ohm's law that breaks the frozen-in flux condition in ideal magnetohydrodynamics and allows magnetic reconnection to occur. We point out that this same reconnection electric field also plays an important role in sustaining the current and pressure in the current sheet and then discuss the determination of its magnitude (i.e., the reconnection rate), based on force balance and energy conservation. This approach to determining the reconnection rate is applied to kinetic current sheets of a wide variety of magnetic geometries, parameters, and background conditions. We also briefly review the key diagnostics and modeling of energy conversion around the reconnection diffusion region, seeking insights from recently developed theories. Finally, future prospects and open questions are discussed. △ Less

Submitted 2 June, 2024; originally announced June 2024.

Comments: Submitted to Space Science Reviews. This is a review paper as an outcome of the 2022 Magnetic Reconnection Workshop in the International Space Science Institute

Non-destructive Degradation Pattern Decoupling for Ultra-early Battery Prototype Verification Using Physics-informed Machine Learning

Authors: Shengyu Tao, Mengtian Zhang, Zixi Zhao, Haoyang Li, Ruifei Ma, Yunhong Che, Xin Sun, Lin Su, Xiangyu Chen, Zihao Zhou, Heng Chang, Tingwei Cao, Xiao Xiao, Yaojun Liu, Wenjun Yu, Zhongling Xu, Yang Li, Han Hao, Xuan Zhang, Xiaosong Hu, Guangmin ZHou

Abstract: Manufacturing complexities and uncertainties have impeded the transition from material prototypes to commercial batteries, making prototype verification critical to quality assessment. A fundamental challenge involves deciphering intertwined chemical processes to characterize degradation patterns and their quantitative relationship with battery performance. Here we show that a physics-informed mac… ▽ More Manufacturing complexities and uncertainties have impeded the transition from material prototypes to commercial batteries, making prototype verification critical to quality assessment. A fundamental challenge involves deciphering intertwined chemical processes to characterize degradation patterns and their quantitative relationship with battery performance. Here we show that a physics-informed machine learning approach can quantify and visualize temporally resolved losses concerning thermodynamics and kinetics only using electric signals. Our method enables non-destructive degradation pattern characterization, expediting temperature-adaptable predictions of entire lifetime trajectories, rather than end-of-life points. The verification speed is 25 times faster yet maintaining 95.1% accuracy across temperatures. Such advances facilitate more sustainable management of defective prototypes before massive production, establishing a 19.76 billion USD scrap material recycling market by 2060 in China. By incorporating stepwise charge acceptance as a measure of the initial manufacturing variability of normally identical batteries, we can immediately identify long-term degradation variations. We attribute the predictive power to interpreting machine learning insights using material-agnostic featurization taxonomy for degradation pattern decoupling. Our findings offer new possibilities for dynamic system analysis, such as battery prototype degradation, demonstrating that complex pattern evolutions can be accurately predicted in a non-destructive and data-driven fashion by integrating physics-informed machine learning. △ Less

Submitted 31 May, 2024; originally announced June 2024.

ACM Class: J.2; G.3

In vivo fundus imaging and computational refocusing with a diffuser-based fundus camera

Authors: Corey Simmerer, Marisa Morakis, Lei Tian, Lia Gomez-Perez, T. Y. Alvin Liu, Nicholas J. Durr

Abstract: Access to eye care can be expanded with high-throughput, easy-to-use, and portable diagnostic tools. Phase mask encoded imaging could improve these aspects of the fundus camera by enabling computational refocusing without any moving parts. This approach circumvents the need to adjust lenses to compensate for refractive errors. We developed a computational fundus camera by introducing a holographic… ▽ More Access to eye care can be expanded with high-throughput, easy-to-use, and portable diagnostic tools. Phase mask encoded imaging could improve these aspects of the fundus camera by enabling computational refocusing without any moving parts. This approach circumvents the need to adjust lenses to compensate for refractive errors. We developed a computational fundus camera by introducing a holographic diffuser at the plane conjugate to the ocular pupil, resulting in a laterally shift-invariant point spread function. We demonstrate computational refocusing of a model eye fundus over a large range of defocus errors. We also show computationally refocused, color, in vivo, human fundus images with a $\geq$35-degree field-of-view (FOV). This technology could eventually be combined with the wavefront-sensing capabilities of phase mask encoded imaging to create a compact ophthalmic imaging system that simultaneously captures a fundus image and performs aberrometry. △ Less

Submitted 10 June, 2024; v1 submitted 31 May, 2024; originally announced June 2024.

Center-to-face momentum interpolation and face-to-center flux reconstruction in Euler-Euler simulation of gas-solid flows

Authors: Yige Liu, Bidan Zhao, Ji Xu, Junwu Wang

Abstract: In order to resolve the pressure checkerboard field problem with collocated grid, it is essential to employ the momentum interpolation method when formulating the pressure equation, and the flux reconstruction method when updating the cell-centered velocity fields. In this study, we first derive a momentum interpolation method for Euler-Euler simulation of gas-solid flows, which is independent of… ▽ More In order to resolve the pressure checkerboard field problem with collocated grid, it is essential to employ the momentum interpolation method when formulating the pressure equation, and the flux reconstruction method when updating the cell-centered velocity fields. In this study, we first derive a momentum interpolation method for Euler-Euler simulation of gas-solid flows, which is independent of the time step, the transient term discretization scheme, the under-relaxation factor and the shape of grid; a complete first-order flux reconstruction method is then proposed to update the cell-centered velocities. Their effectiveness are proved by simulating the hydrodynamics of solids settlement, gas-solid fixed bed, bubbling fluidized bed and circulating fluidized bed riser, and then comparing the simulation results to the theoretically known solutions. Their superiority over the standard solver of OpenFOAM in suppressing the high-frequency oscillations and enhancing the smoothness and accuracy is also proved. Finally, the difficulty in fully eliminating the high-frequency oscillations is attributed to the insufficiency of current methods in handling the situations where the independent variables undergo abrupt change. △ Less

Submitted 31 May, 2024; originally announced May 2024.

A critical comparison of the implementation of granular pressure gradient term in Euler-Euler simulation of gas-solid flows

Authors: Yige Liu, Mingming He, Jianhua Chen, Wen Li, Bidan Zhao, Ji Xu, Junwu Wang

Abstract: Numerical solution of Euler-Euler model using different in-house, open source and commercial software can generate significantly different results, even when the governing equations and the initial and boundary conditions are exactly same. Unfortunately, the underlying reasons have not been identified yet. In this article, three methods for calculating the granular pressure gradient term are prese… ▽ More Numerical solution of Euler-Euler model using different in-house, open source and commercial software can generate significantly different results, even when the governing equations and the initial and boundary conditions are exactly same. Unfortunately, the underlying reasons have not been identified yet. In this article, three methods for calculating the granular pressure gradient term are presented for two-fluid model of gas-solid flows and implemented implicitly or explicitly into the solver in OpenFOAM: Method I assumes that the granular pressure gradient is equal to the elastic modulus plus the solid concentration gradient; Method II directly calculates the gradient using a difference scheme; Method III, which is proposed in this work, calculates the gradient as the sum of two partial derivatives: one related to the solid volume fraction and the other related to the granular energy. Obviously, only Methods II and III are consistent with kinetic theory of granular flow. It was found that the difference between all methods is small for bubbling fluidization. While for circulating fluidization, both methods II and III are capable of capturing non-uniform structures and producing superior results over Method I. The contradictory conclusions made from the simulation of different fluidization regimes is due to the different contribution of the term related to the granular energy gradient. Present study concludes that the implementation method of granular pressure gradient may have a significant impact on hydrodynamics and is probably a key factor contributing to the observed differences between different simulation software. △ Less

Submitted 31 May, 2024; originally announced May 2024.

Silicon-integrated scandium-doped aluminum nitride electro-optic modulator

Authors: Tianqi Xu, Yushuai Liu, Yuanmao Pu, Yongxiang Yang, Qize Zhong, Xingyan Zhao, Yang Qiu, Yuan Dong, Tao Wu, Shaonan Zheng, Ting Hu

Abstract: Scandium-doped aluminum nitride (AlScN) with an asymmetric hexagonal wurtzite structure exhibits enhanced second-order nonlinear and piezoelectric properties compared to aluminum nitride (AlN), while maintaining a relatively large bandgap. It provides a promising platform for photonic integration and facilitates the seamless integration of passive and active functional devices. Here, we present th… ▽ More Scandium-doped aluminum nitride (AlScN) with an asymmetric hexagonal wurtzite structure exhibits enhanced second-order nonlinear and piezoelectric properties compared to aluminum nitride (AlN), while maintaining a relatively large bandgap. It provides a promising platform for photonic integration and facilitates the seamless integration of passive and active functional devices. Here, we present the design, fabrication, and characterization of AlScN EO micro-ring modulators, introducing active functionalities to the chip-scale AlScN platform. These waveguide-integrated EO modulators employ sputtered AlScN thin films as the light-guiding medium, and the entire fabrication process is compatible with complementary metal oxide semiconductor (CMOS) technology. We characterize the high-frequency performance of an AlScN modulator for the first time, extracting a maximum in-device effective EO coefficient of 2.86 pm/V at 12 GHz. The devices show a minimum half-wave voltage-length product of 3.12 V*cm and a 3-dB modulation bandwidth of approximately 22 GHz. Our work provides a promising modulation scheme for cost-effective silicon-integrated photonics systems. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Capturing dynamics and thermodynamics of a three-level quantum heat engine via programmable quantum circuits

Authors: Gao-xiang Deng, Zhe He, Yu Liu, Wei Shao, Zheng Cui

Abstract: This research employs the Kraus representation and Sz.-Nagy dilation theorem to model a three-level quantum heat on quantum circuits, investigating its dynamic evolution and thermodynamic performance. The feasibility of the dynamic model is validated by tracking the changes of population. On the basis of reinforcement learning algorithm, the optimal cycle of the quantum heat engine for maximal ave… ▽ More This research employs the Kraus representation and Sz.-Nagy dilation theorem to model a three-level quantum heat on quantum circuits, investigating its dynamic evolution and thermodynamic performance. The feasibility of the dynamic model is validated by tracking the changes of population. On the basis of reinforcement learning algorithm, the optimal cycle of the quantum heat engine for maximal average power is proposed and verified by the thermodynamic model. The stability of quantum circuit simulations is scrutinized through a comparative analysis of theoretical and simulated results, predicated on an orthogonal test. These results affirm the practicality of simulating quantum heat engines on quantum circuits, offering potential for substantially curtailing the experimental expenses associated with the construction of such engines. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Learning phase transitions by siamese neural network

Authors: Jianmin Shen, Shiyang Chen, Feiyi Liu, Youju Liu, Wei Li

Abstract: The wide application of machine learning (ML) techniques in statistics physics has presented new avenues for research in this field. In this paper, we introduce a semi-supervised learning method based on Siamese Neural Networks (SNN), trying to explore the potential of neural network (NN) in the study of critical behaviors beyond the approaches of supervised and unsupervised learning. By focusing… ▽ More The wide application of machine learning (ML) techniques in statistics physics has presented new avenues for research in this field. In this paper, we introduce a semi-supervised learning method based on Siamese Neural Networks (SNN), trying to explore the potential of neural network (NN) in the study of critical behaviors beyond the approaches of supervised and unsupervised learning. By focusing on the (1+1) dimensional bond directed percolation (DP) model of nonequilibrium phase transition, we use the SNN to predict the critical values and critical exponents of the system. Different from traditional ML methods, the input of SNN is a set of configuration data pairs and the output prediction is similarity, which prompts to find an anchor point of data for pair comparison during the test. In our study, during test we set different bond probability $p$ as anchors, and discuss the impact of the configurations at this anchors on predictions. More, we use an iterative method to find the optimal training interval to make the algorithm more efficient, and the prediction results are comparable to other ML methods. △ Less

Submitted 26 May, 2024; originally announced May 2024.

Comments: 14 pages, 9 figures

Syngas conversion to higher alcohols via wood-framed Cu/Co-carbon catalyst

Authors: Guihua Yan, Paulina Pršlja, Gaofeng Chen, Jiahui Kang, Yongde Liu, Miguel A. Caro, Xi Chen, Xianhai Zeng, Bo Peng

Abstract: Syngas conversion into higher alcohols represents a promising avenue for transforming coal or biomass into liquid fuels. However, the commercialization of this process has been hindered by the high cost, low activity, and inadequate C$_{2+}$OH selectivity of catalysts. Herein, we have developed Cu/Co carbon wood catalysts, offering a cost-effective and stable alternative with exceptional selectivi… ▽ More Syngas conversion into higher alcohols represents a promising avenue for transforming coal or biomass into liquid fuels. However, the commercialization of this process has been hindered by the high cost, low activity, and inadequate C$_{2+}$OH selectivity of catalysts. Herein, we have developed Cu/Co carbon wood catalysts, offering a cost-effective and stable alternative with exceptional selectivity for catalytic conversion. The formation of Cu/Co nanoparticles was found, influenced by water-1,2-propylene glycol ratios in the solution, resulting in bidisperse nanoparticles. The catalyst exhibited a remarkable CO conversion rate of 74.8% and a selectivity of 58.7% for C$_{2+}$OH, primarily comprising linear primary alcohols. This catalyst demonstrated enduring stability and selectivity under industrial conditions, maintaining its efficacy for up to 350 h of operation. We also employed density functional theory (DFT) to analyze selectivity, particularly focusing on the binding strength of CO, a crucial precursor for subsequent reactions leading to the formation of CH$_3$OH. DFT identified the pathway of CH$_x$ and CO coupling, ultimately yielding C$_2$H$_5$OH. This computational understanding, coupled with high performance of the Cu/Co-carbon wood catalyst, paves ways for the development of catalytically selective materials tailored for higher alcohols production, thereby ushering in new possibility in this field. △ Less

Submitted 24 May, 2024; originally announced May 2024.

Quantitative Unmixing in Photoswitching Optoacoustic Tomography

Authors: Yan Liu, Jonathan Chuah, Andre C. Stiel, Michael Unser, Jonathan Dong

Abstract: Optoacoustic (OA) imaging combined with reversibly photoswitchable proteins has emerged as a promising technology for the high-sensitivity and multiplexed imaging of cells in live tissues in preclinical research. Through carefully-designed illumination schedules of ON and OFF laser pulses, the resulting OA signal is a multiplex of different reporter species and the background. By exploiting their… ▽ More Optoacoustic (OA) imaging combined with reversibly photoswitchable proteins has emerged as a promising technology for the high-sensitivity and multiplexed imaging of cells in live tissues in preclinical research. Through carefully-designed illumination schedules of ON and OFF laser pulses, the resulting OA signal is a multiplex of different reporter species and the background. By exploiting their distinct inherent photo-physical properties which govern the rate of switching, one can recover the concentration maps of protein reporters from the temporally entangled OA images. In this paper, we propose a quantitative unmixing approach in the form of a regularized inversion algorithm based on a mathematical model of the temporal decay of the signal measuring the underlying protein reporters. We validate three types of reporters on simulated and experimental datasets and show successful unmixing results. △ Less

Submitted 24 May, 2024; originally announced May 2024.

Two-octave frequency combs from all-silica-fiber implementation

Authors: Yanyan Zhang, Mingkun Li, Pan Zhang, Yueqing Du, Shibang Ma, Yuanshan Liu, Sida Xing, Shougang Zhang

Abstract: Mid-infrared frequency comb spectroscopy enables measurement of molecular at megahertz spectral resolution, sub-hertz frequency accuracy and microsecond acquisition speed. However, the widespread adoption of this technique has been hindered by the complexity and alignment sensitivity of mid-infrared frequency comb sources. Leveraging the underexplored mid-infrared window of silica fibers presents… ▽ More Mid-infrared frequency comb spectroscopy enables measurement of molecular at megahertz spectral resolution, sub-hertz frequency accuracy and microsecond acquisition speed. However, the widespread adoption of this technique has been hindered by the complexity and alignment sensitivity of mid-infrared frequency comb sources. Leveraging the underexplored mid-infrared window of silica fibers presents a promising approach to address these challenges. In this study, we present the first experimental demonstration and quantitative numerical description of mid-infrared frequency comb generation in silica fibers. Our all-silica-fiber frequency comb spans over two octaves (0.8 $μみゅー$m to 3.5 $μみゅー$m) with a power output of 100 mW in the mid-infrared region. The amplified quantum noise is suppressed using four-cycle (25 fs) driving pulses, with the carrier-envelope offset frequency exhibiting a signal-to-noise ratio of 40 dBでしべる and a free-running bandwidth of 90 kHzきろへるつ. Our developed model provides quantitative guidelines for mid-infrared frequency comb generation in silica fibers, enabling all-fiber frequency comb spectroscopy in diverse fields such as organic synthesis, pharmacokinetics processes, and environmental monitoring. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Non-Euclidean conformal devices with continuously varying refractive index profiles based on bi-spheres

Authors: Wenjing Lv, Jiaojiao Zhou, Y. Liu, Lin Xu

Abstract: Either conformal transformation optics or geodesic mapping provides a design method to bend light rays in two-dimensional space with a nonuniform refractive index profile. In this paper, we combine both methods above to design a conformal invisible cloak based on bi-spheres with a refractive index profile varying from 0 to 10.7, smaller than 24.6 for the previous case of a single sphere. Moreover,… ▽ More Either conformal transformation optics or geodesic mapping provides a design method to bend light rays in two-dimensional space with a nonuniform refractive index profile. In this paper, we combine both methods above to design a conformal invisible cloak based on bi-spheres with a refractive index profile varying from 0 to 10.7, smaller than 24.6 for the previous case of a single sphere. Moreover, we obtain an omnidirectional retro-reflector and a specular reflector by making position adjustments to mirrors, and achieve similar invisible effect by tuning sizes of the bi-spheres. Our work expands the toolkits for designing conformal devices with continuously-varying index profile. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Comments: 16 pages, 5 figures

Single color virtual H&E staining with In-and-Out Net

Authors: Mengkun Chen, Yen-Tung Liu, Fadeel Sher Khan, Matthew C. Fox, Jason S. Reichenberg, Fabiana C. P. S. Lopes, Katherine R. Sebastian, Mia K. Markey, James W. Tunnell

Abstract: Virtual staining streamlines traditional staining procedures by digitally generating stained images from unstained or differently stained images. While conventional staining methods involve time-consuming chemical processes, virtual staining offers an efficient and low infrastructure alternative. Leveraging microscopy-based techniques, such as confocal microscopy, researchers can expedite tissue a… ▽ More Virtual staining streamlines traditional staining procedures by digitally generating stained images from unstained or differently stained images. While conventional staining methods involve time-consuming chemical processes, virtual staining offers an efficient and low infrastructure alternative. Leveraging microscopy-based techniques, such as confocal microscopy, researchers can expedite tissue analysis without the need for physical sectioning. However, interpreting grayscale or pseudo-color microscopic images remains a challenge for pathologists and surgeons accustomed to traditional histologically stained images. To fill this gap, various studies explore digitally simulating staining to mimic targeted histological stains. This paper introduces a novel network, In-and-Out Net, specifically designed for virtual staining tasks. Based on Generative Adversarial Networks (GAN), our model efficiently transforms Reflectance Confocal Microscopy (RCM) images into Hematoxylin and Eosin (H&E) stained images. We enhance nuclei contrast in RCM images using aluminum chloride preprocessing for skin tissues. Training the model with virtual H\&E labels featuring two fluorescence channels eliminates the need for image registration and provides pixel-level ground truth. Our contributions include proposing an optimal training strategy, conducting a comparative analysis demonstrating state-of-the-art performance, validating the model through an ablation study, and collecting perfectly matched input and ground truth images without registration. In-and-Out Net showcases promising results, offering a valuable tool for virtual staining tasks and advancing the field of histological image analysis. △ Less

Submitted 21 May, 2024; originally announced May 2024.

A Compact Readout Electronics Based on Current Amplifier for Micromegas Detector in Muon Image

Authors: Ting Wang, Yu Wang, Zhihang Yao, Yulin Liu, Changqing Feng, Zhiyong Zhang, Shubin Liu

Abstract: Muon imaging technology is an innovative imaging technique that can be applied in volcano imaging, heavy nuclear material detection, and archaeological research. The Micromegas detector is a promising choice for muon imaging due to its high spatial resolution and large area. However, the large number of readout channels poses a challenge for electronics. In this paper, a compact front-end electron… ▽ More Muon imaging technology is an innovative imaging technique that can be applied in volcano imaging, heavy nuclear material detection, and archaeological research. The Micromegas detector is a promising choice for muon imaging due to its high spatial resolution and large area. However, the large number of readout channels poses a challenge for electronics. In this paper, a compact front-end electronics (FEE) for reading Micromegas detectors is presented. The electronics use a current-based readout chip, ADAS1128, which integrates 128 current amplifiers for multi-channel charge measurement. After noise and calibration tests, detector energy resolution tests were performed using 5.9 keV X-rays. The X-ray full energy peak and Ar escape peak can be observed; the energy resolution of the full energy peak is about 20.23%@5.9 keV. Additionally, a muon image system was set up to verify the imaging capacity of Micromegas detectors. Test results show that the spatial resolution of the system is better than 200 μみゅーm. The muon image system can reconstruct the boundaries for objects with a size of 2 cm. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Direct imaging of asymmetric interfaces and electrostatic potentials inside a hafnia-zirconia ferroelectric nanocapacitor

Authors: Daniel B Durham, Manifa Noor, Khandker Akif Aabrar, Yuzi Liu, Suman Datta, Kyeongjae Cho, Supratik Guha, Charudatta Phatak

Abstract: In hafnia-based thin-film ferroelectric devices, chemical phenomena during growth and processing such as oxygen vacancy formation and interfacial reactions appear to strongly affect device performance. However, the nanoscale structure, chemistry, and electrical potentials in these devices are not fully known, making it difficult to understand their influence on device properties. Here, we directly… ▽ More In hafnia-based thin-film ferroelectric devices, chemical phenomena during growth and processing such as oxygen vacancy formation and interfacial reactions appear to strongly affect device performance. However, the nanoscale structure, chemistry, and electrical potentials in these devices are not fully known, making it difficult to understand their influence on device properties. Here, we directly image the composition and electrostatic potential with nanometer resolution in the cross section of a nanocrystalline W / Hf$_{0.5}$Zr$_{0.5}$O$_{2-δでるた}$ (HZO) / W ferroelectric capacitor using multimodal electron microscopy. This reveals a 1.4 nm wide tungsten sub-oxide interfacial layer formed at the bottom interface during fabrication which introduces a potential dip and leads to asymmetric switching fields. Additionally, the measured inner potential in HZO is consistent with the presence of about 20% oxygen vacancies and a negative built-in potential in HZO. These chemical and electrostatic details are important to characterize and tune to achieve high performance ferroelectric devices. △ Less

Submitted 19 May, 2024; originally announced May 2024.

Comments: 20 pages, 3 figures, 1 table, 3 supporting figures

Tip-leakage-flow excited unsteadiness and associated control

Authors: Yabin Liu, Zhong-Nan Wang, Lei Tan, Paul Gary Tucker, Felix M. Möller

Abstract: Tip leakage flow in turbomachinery inherently generates intense unsteady features, named self-excited unsteadiness, which has not been well understood. A Zonalised LES (ZLES) is employed around a linear cascade, with wall-modelled Large Eddy Simulation (LES) forced to be active in the tip region. The simulation is well validated and demonstrated the advantages of effectively reducing the computati… ▽ More Tip leakage flow in turbomachinery inherently generates intense unsteady features, named self-excited unsteadiness, which has not been well understood. A Zonalised LES (ZLES) is employed around a linear cascade, with wall-modelled Large Eddy Simulation (LES) forced to be active in the tip region. The simulation is well validated and demonstrated the advantages of effectively reducing the computational effort while maintaining an equivalent prediction accuracy in the region of interest. The time-averaged and spatial-spectral characteristics of tip leakage vortex (TLV) structures are systematically discussed. The self-excited unsteady processes of TLV include unsteady vortex separation inside the tip gap, the tip leakage jet-mainstream interaction, the primary tip leakage vortex (PTLV) wandering motion and the induced separation near endwall. The Spectral Proper Orthogonal Decomposition (SPOD) is used to examine the dominant frequencies and their coherent structures. It is found that these unsteady features change from a single high-frequency mode to a multiple lower-frequencies mode due to the PTLV breakdown. The SPOD and correlation analyses reveal that the self-excited unsteadiness is mainly induced by the interactions between unsteady vortex separation, tip leakage jet, and mainstream. The associated unsteady fluctuations are convected along the tip leakage jet trajectory, causing the wandering motion of PTLV core. Based on the cause of the investigated unsteadiness, a micro-offset tip design is proposed and validated for effectively suppressing this unsteadiness, and associated turbulence generation and hence pressure fluctuations. This work improves the understanding of tip-leakage-flow dynamics and informs the control of the associated unsteady fluid oscillation and noise. △ Less

Submitted 16 May, 2024; v1 submitted 15 May, 2024; originally announced May 2024.

Application of Probabilistic-bit in Precision Measurements

Authors: Yunwen Liu, Jiang Xiao

Abstract: We propose a novel approach for precision measurement utilizing an ensemble of probabilistic bits (p-bits). This method leverages the inherent fluctuations of p-bits to achieve high sensitivity in various applications, including magnetic field sensing, temperature monitoring and timekeeping. The sensitivity scales proportionally to the square root of the total number of p-bits, enabling unpreceden… ▽ More We propose a novel approach for precision measurement utilizing an ensemble of probabilistic bits (p-bits). This method leverages the inherent fluctuations of p-bits to achieve high sensitivity in various applications, including magnetic field sensing, temperature monitoring and timekeeping. The sensitivity scales proportionally to the square root of the total number of p-bits, enabling unprecedented accuracy with large ensembles. Furthermore, the robustness of this method against device imperfections and non-uniformity enhances its practicality and scalability. This work paves the way for a new paradigm in precision measurement, offering a cost-effective and versatile alternative to traditional methods. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Comments: 5 pages, 2 figures