Showing 1–38 of 38 results for author: Lynch, J

> 2πぱい Phase Modulation using Exciton-Polaritons in a Two-Dimensional Superlattice

Authors: Jason Lynch, Pawan Kumar, Chen Chen, Nicholas Trainor, Shalini Kumari, Tzu-Yu Peng, Cindy Yueli Chen, Yu-Jung Lu, Joan Redwing, Deep Jariwala

Abstract: Active metamaterials promise to enable arbitrary, temporal control over the propagation of wavefronts of light for applications such as beam steering, optical communication modulators, and holograms. This has been done in the past using patterned silicon photonics to locally control the phase of light such that the metasurface acts as a large number of wavelets. Although phase modulation only requ… ▽ More Active metamaterials promise to enable arbitrary, temporal control over the propagation of wavefronts of light for applications such as beam steering, optical communication modulators, and holograms. This has been done in the past using patterned silicon photonics to locally control the phase of light such that the metasurface acts as a large number of wavelets. Although phase modulation only requires refractive index modulation when the interaction length is on the order of the wavelength, this is not enough to significantly modulate the phase of light in flatland. Instead, phase modulation is achieved using a resonant mode such as a plasmon or high-Q cavity mode that enable light to accumulate a large amount of phase over a short distance and coupling it to an active material that modulates the light-matter interactions. Here, we report that electrostatic doping can modulate the light-matter interaction strength of a two-dimensional WS2 based multi quantum well (MQW) structure going from strongly-coupled, phase-accumulating exciton-polaritons to weakly-coupled exciton-trion-polaritons. As a result of this transition, 2.02πぱい radians of phase modulation is observed using spectroscopic ellipsometry. This result demonstrates the potential of the MQW structure as a compact, lightweight electro-optical modulators for LiDAR and optical communications in the red region of visible spectrum. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Broadband Light Harvesting from Scalable Two-Dimensional Semiconductor Heterostructures

Authors: Da Lin, Jason Lynch, Sudong Wang, Zekun Hu, Rajeev Kumar Rai, Huairuo Zhang, Chen Chen, Shalini Kumari, Eric Stach, Albert V. Davydov, Joan M. Redwing, Deep Jariwala

Abstract: Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that maximize absorption using surface plasmons and/or Fabry-Perot cavities, which limits the weight efficiency of the device. Here, we show the theoretical and experime… ▽ More Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that maximize absorption using surface plasmons and/or Fabry-Perot cavities, which limits the weight efficiency of the device. Here, we show the theoretical and experimental realization of an unpatterned/planar semiconductor thin-film absorber based on monolayer transition metal dichalcogenides (TMDCs). We experimentally demonstrate an average total absorption in the visible range (450 nm - 700 nm) of > 70% using > 4 nm of semiconductor absorbing materials scalable over large areas with vapor phase growth techniques. Our analysis suggests that a power conversion efficiency (PCE) of 15.54% and a specific power > 300 W g^-1 may be achieved in a photovoltaic cell based on this metamaterial absorber. △ Less

Submitted 6 July, 2024; originally announced July 2024.

Self-Hybridized Exciton-Polariton Photovoltaics

Authors: Adam D. Alfieri, Tobia Ruth, Cheryl Lim, Jason Lynch, Deep Jariwala

Abstract: Excitonic semiconductors are attractive for next-generation photovoltaics (PVs) with lower cost, lighter weight, and lower material consumption than conventional technologies. Among them, transition metal dichalcogenide materials like WS2 are especially interesting due to exceptionally strong light-matter interaction. Photocurrent generation in excitonic PVs relies on exciton diffusion to heteroin… ▽ More Excitonic semiconductors are attractive for next-generation photovoltaics (PVs) with lower cost, lighter weight, and lower material consumption than conventional technologies. Among them, transition metal dichalcogenide materials like WS2 are especially interesting due to exceptionally strong light-matter interaction. Photocurrent generation in excitonic PVs relies on exciton diffusion to heterointerfaces. However, efficiencies of excitonic PVs are often limited by short exciton diffusion lengths. Here we report that the strong coupling of excitons to cavity photons in a WS2 absorber layer can enhance the external quantum efficiency by a factor of >10, internal quantum efficiency by a factor of ~3, and power conversion efficiency of excitonic PVs by an order of magnitude. The resulting hybrid states, exciton-polaritons, enhance the resonant absorption and exciton transport while the use of the WS2 layer as its own optical cavity enables broadband absorption. Thickness dependent device characterization reveals anomalous internal quantum efficiency and fill factor behavior that are attributed to novel exciton-polariton transport. Exciton-polariton enhanced transport occurs for both resonant and off-resonant excitation, emphasizing the value and practicality of the self-hybridized device structure. Our work presents a route towards excitonic PVs with broadband absorption and improved exciton transport without strict requirements of donor/acceptor structure of other excitonic PVs. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Tandem Photovoltaics from 2D Transition Metal Dichalcogenides on Silicon

Authors: Zekun Hu, Sudong Wang, Jason Lynch, Deep Jariwala

Abstract: The demand for high-efficiency photovoltaic systems necessitates innovations that transcend the efficiency limitations of single-junction solar cells. This study investigates a tandem photovoltaic architecture comprising a top-cell with a transition metal dichalcogenide (TMDC) superlattice absorber and a bottom-cell of crystalline silicon (c-Si), focusing on optimizing the light absorption and ele… ▽ More The demand for high-efficiency photovoltaic systems necessitates innovations that transcend the efficiency limitations of single-junction solar cells. This study investigates a tandem photovoltaic architecture comprising a top-cell with a transition metal dichalcogenide (TMDC) superlattice absorber and a bottom-cell of crystalline silicon (c-Si), focusing on optimizing the light absorption and electrical performance of the combined structure. Through the transfer matrix method and electrical simulations, we optimized the geometry of the superlattice, determining that a siz-layer MoSe2 configuration with a 40 nm SiO2 antireflective layer maximizes photon absorption while mitigating additional weight and preserving the cell's structural integrity. The results show that the optimized TMDC superlattice significantly improves the PCE of the tandem design to 28.96%, and increase of 5.68% over the original single-junction c-Si solar cell's efficiency. This advancement illustrates the potential of TMDC material in next-generation solar cells and presents a promising avenue for the development of highly efficient, tandem photovoltaic systems via van der Waals integration of the top cell on c-Si △ Less

Submitted 4 September, 2024; v1 submitted 14 June, 2024; originally announced June 2024.

Energetic and Control Trade-offs in Spring-Wing Systems

Authors: James Lynch, Ethan S. Wold, Jeff Gau, Simon Sponberg, Nick Gravish

Abstract: Flying insects are thought to achieve energy-efficient flapping flight by storing and releasing elastic energy in their muscles, tendons, and thorax. However, flight systems consisting elastic elements coupled to nonlinear, unsteady aerodynamic forces also present possible challenges to generating steady and responsive wing motions. In previous work, we examined the resonance properties of a dynam… ▽ More Flying insects are thought to achieve energy-efficient flapping flight by storing and releasing elastic energy in their muscles, tendons, and thorax. However, flight systems consisting elastic elements coupled to nonlinear, unsteady aerodynamic forces also present possible challenges to generating steady and responsive wing motions. In previous work, we examined the resonance properties of a dynamically-scaled robophysical system consisting of a rigid wing actuated by a motor in series with a spring, which we call a spring-wing system \cite{Lynch2021-ri}. In this paper, we seek to better understand the effects of perturbations on resonant systems via a non-dimensional parameter, the Weis-Fogh number. We drive a spring-wing system at a fixed resonant frequency and study the response to an internal control perturbation and an external aerodynamic perturbation with varying Weis-Fogh number. In our first experiments, we provide a step change in the input forcing amplitude and study the wing motion response. In our second experiments we provide an external fluid flow directed at the flapping wing and study the perturbed steady-state wing motion. We evaluate results across the Weis-Fogh number, which describes the ratio of inertial and aerodynamic forces and the potential energetic benefits of elastic resonance. The results suggest that spring-wing systems designed for maximum energetic efficiency also experience trade-offs in agility and stability as the Weis-Fogh number increases. Our results demonstrate that energetic efficiency and wing maneuverability are in conflict in resonant spring-wing systems suggesting that mechanical resonance presents tradeoffs in insect flight. △ Less

Submitted 5 March, 2024; originally announced March 2024.

On the Mesoscale Structure of CMEs at Mercury's Orbit: BepiColombo and Parker Solar Probe Observations

Authors: Erika Palmerio, Fernando Carcaboso, Leng Ying Khoo, Tarik M. Salman, Beatriz Sánchez-Cano, Benjamin J. Lynch, Yeimy J. Rivera, Sanchita Pal, Teresa Nieves-Chinchilla, Andreas J. Weiss, David Lario, Johannes Z. D. Mieth, Daniel Heyner, Michael L. Stevens, Orlando M. Romeo, Andrei N. Zhukov, Luciano Rodriguez, Christina O. Lee, Christina M. S. Cohen, Laura Rodríguez-García, Phyllis L. Whittlesey, Nina Dresing, Philipp Oleynik, Immanuel C. Jebaraj, David Fischer , et al. (5 additional authors not shown)

Abstract: On 2022 February 15, an impressive filament eruption was observed off the solar eastern limb from three remote-sensing viewpoints, namely Earth, STEREO-A, and Solar Orbiter. In addition to representing the most-distant observed filament at extreme ultraviolet wavelengths -- captured by Solar Orbiter's field of view extending to above 6 $R_{\odot}$ -- this event was also associated with the release… ▽ More On 2022 February 15, an impressive filament eruption was observed off the solar eastern limb from three remote-sensing viewpoints, namely Earth, STEREO-A, and Solar Orbiter. In addition to representing the most-distant observed filament at extreme ultraviolet wavelengths -- captured by Solar Orbiter's field of view extending to above 6 $R_{\odot}$ -- this event was also associated with the release of a fast ($\sim$2200 km$\cdot$s$^{-1}$) coronal mass ejection (CME) that was directed towards BepiColombo and Parker Solar Probe. These two probes were separated by 2$^{\circ}$ in latitude, 4$^{\circ}$ in longitude, and 0.03 au in radial distance around the time of the CME-driven shock arrival in situ. The relative proximity of the two probes to each other and to the Sun ($\sim$0.35 au) allows us to study the mesoscale structure of CMEs at Mercury's orbit for the first time. We analyse similarities and differences in the main CME-related structures measured at the two locations, namely the interplanetary shock, the sheath region, and the magnetic ejecta. We find that, despite the separation between the two spacecraft being well within the typical uncertainties associated with determination of CME geometric parameters from remote-sensing observations, the two sets of in-situ measurements display some profound differences that make understanding of the overall 3D CME structure particularly challenging. Finally, we discuss our findings within the context of space weather at Mercury's distances and in terms of the need to investigate solar transients via spacecraft constellations with small separations, which has been gaining significant attention during recent years. △ Less

Submitted 3 January, 2024; originally announced January 2024.

Comments: 31 pages, 13 figures, 5 tables, accepted for publication in The Astrophysical Journal

Giant Optical Anisotropy in 2D Metal-Organic Chalcogenates

Authors: Bongjun Choi, Kiyoung Jo, Mahfujur Rahaman, Adam Alfieri, Jason Lynch, Greg K. Pribil, Hyeongjun Koh, Eric A. Stach, Deep Jariwala

Abstract: Optical anisotropy is a fundamental attribute of some crystalline materials and is quantified via birefringence. A birefringent crystal not only gives rise to asymmetrical light propagation but also attenuation along two distinct polarizations, a phenomenon called linear dichroism (LD). Two-dimensional (2D) layered materials with high in- and out-of-plane anisotropy have garnered interest in this… ▽ More Optical anisotropy is a fundamental attribute of some crystalline materials and is quantified via birefringence. A birefringent crystal not only gives rise to asymmetrical light propagation but also attenuation along two distinct polarizations, a phenomenon called linear dichroism (LD). Two-dimensional (2D) layered materials with high in- and out-of-plane anisotropy have garnered interest in this regard. Mithrene, a 2D metal-organic chalcogenate (MOCHA) compound, exhibits strong excitonic resonances due to its naturally occurring multi-quantum well (MQW) structure and in-plane anisotropic response in the blue wavelength (~400-500 nm) regime. The MQW structure and the large refractive indices of mithrene allow the hybridization of the excitons with photons to form self-hybridized exciton-polaritons in mithrene crystals with appropriate thicknesses. Here, we report the giant birefringence (~1.01) and tunable in-plane anisotropic response of mithrene, which stem from its low symmetry crystal structure and unique excitonic properties. We show that the LD in mithrene can be tuned by leveraging the anisotropic exciton-polariton formation via the cavity coupling effect exhibiting giant in-plane LD (~77.1%) at room temperature. Our results indicate that mithrene is an ideal polaritonic birefringent material for polarization-sensitive nanophotonic applications in the short wavelength regime. △ Less

Submitted 3 April, 2024; v1 submitted 31 December, 2023; originally announced January 2024.

Modeling a Coronal Mass Ejection from an Extended Filament Channel. II. Interplanetary Propagation to 1 au

Authors: Erika Palmerio, Anwesha Maharana, Benjamin J. Lynch, Camilla Scolini, Simon W. Good, Jens Pomoell, Alexey Isavnin, Emilia K. J. Kilpua

Abstract: We present observations and modeling results of the propagation and impact at Earth of a high-latitude, extended filament channel eruption that commenced on 2015 July 9. The coronal mass ejection (CME) that resulted from the filament eruption was associated with a moderate disturbance at Earth. This event could be classified as a so-called "problem storm" because it lacked the usual solar signatur… ▽ More We present observations and modeling results of the propagation and impact at Earth of a high-latitude, extended filament channel eruption that commenced on 2015 July 9. The coronal mass ejection (CME) that resulted from the filament eruption was associated with a moderate disturbance at Earth. This event could be classified as a so-called "problem storm" because it lacked the usual solar signatures that are characteristic of large, energetic, Earth-directed CMEs that often result in significant geoeffective impacts. We use solar observations to constrain the initial parameters and therefore to model the propagation of the 2015 July 9 eruption from the solar corona up to Earth using 3D magnetohydrodynamic heliospheric simulations with three different configurations of the modeled CME. We find the best match between observed and modeled arrival at Earth for the simulation run that features a toroidal flux rope structure of the CME ejecta, but caution that different approaches may be more or less useful depending on the CME-observer geometry when evaluating the space weather impact of eruptions that are extreme in terms of their large size and high degree of asymmetry. We discuss our results in the context of both advancing our understanding of the physics of CME evolution and future improvements to space weather forecasting. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Comments: 20 pages, 8 figures, 2 tables, accepted for publication in The Astrophysical Journal

New Observations Needed to Advance Our Understanding of Coronal Mass Ejections

Authors: Erika Palmerio, Benjamin J. Lynch, Christina O. Lee, Lan K. Jian, Teresa Nieves-Chinchilla, Emma E. Davies, Brian E. Wood, Noé Lugaz, Réka M. Winslow, Tibor Török, Nada Al-Haddad, Florian Regnault, Meng Jin, Camilla Scolini, Fernando Carcaboso, Charles J. Farrugia, Vincent E. Ledvina, Cooper Downs, Christina Kay, Sanchita Pal, Tarik M. Salman, Robert C. Allen

Abstract: Coronal mass ejections (CMEs) are large eruptions from the Sun that propagate through the heliosphere after launch. Observational studies of these transient phenomena are usually based on 2D images of the Sun, corona, and heliosphere (remote-sensing data), as well as magnetic field, plasma, and particle samples along a 1D spacecraft trajectory (in-situ data). Given the large scales involved and th… ▽ More Coronal mass ejections (CMEs) are large eruptions from the Sun that propagate through the heliosphere after launch. Observational studies of these transient phenomena are usually based on 2D images of the Sun, corona, and heliosphere (remote-sensing data), as well as magnetic field, plasma, and particle samples along a 1D spacecraft trajectory (in-situ data). Given the large scales involved and the 3D nature of CMEs, such measurements are generally insufficient to build a comprehensive picture, especially in terms of local variations and overall geometry of the whole structure. This White Paper aims to address this issue by identifying the data sets and observational priorities that are needed to effectively advance our current understanding of the structure and evolution of CMEs, in both the remote-sensing and in-situ regimes. It also provides an outlook of possible missions and instruments that may yield significant improvements into the subject. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: White Paper submitted to the Heliophysics 2024-2033 Decadal Survey, 9 pages, 4 figures

Journal ref: Bulletin of the AAS, 55(3), 307, 2023

Ultrastrong Light-Matter Coupling in 2D Metal-Chalcogenates

Authors: Surendra B. Anantharaman, Jason Lynch, Mariya Aleksich, Christopher E. Stevens, Christopher Munley, Bongjun Choi, Sridhar Shenoy, Thomas Darlington, Arka Majumdar, P. James Shuck, Joshua Hendrickson, J. Nathan Hohman, Deep Jariwala

Abstract: Hybridization of excitons with photons to form hybrid quasiparticles, exciton-polaritons (EPs), has been widely investigated in a range of semiconductor material systems coupled to photonic cavities. Self-hybridization occurs when the semiconductor itself can serve as the photonic cavity medium resulting in strongly-coupled EPs with Rabi splitting energies > 200 meV at room temperatures which rece… ▽ More Hybridization of excitons with photons to form hybrid quasiparticles, exciton-polaritons (EPs), has been widely investigated in a range of semiconductor material systems coupled to photonic cavities. Self-hybridization occurs when the semiconductor itself can serve as the photonic cavity medium resulting in strongly-coupled EPs with Rabi splitting energies > 200 meV at room temperatures which recently were observed in layered two-dimensional (2D) excitonic materials. Here, we report an extreme version of this phenomenon, an ultrastrong EP coupling, in a nascent, 2D excitonic system, the metal organic chalcogenate (MOCHA) compound named mithrene. The resulting self-hybridized EPs in mithrene crystals placed on Au substrates show Rabi Splitting in the ultrastrong coupling range (> 600 meV) due to the strong oscillator strength of the excitons concurrent with the large refractive indices of mithrene. We further show bright EP emission at room temperature as well as EP dispersions at low-temperatures. Importantly, we find lower EP emission linewidth narrowing to ~1 nm when mithrene crystals are placed in closed Fabry-Perot cavities. Our results suggest that MOCHA materials are ideal for polaritonics in the deep green-blue part of the spectrum where strong excitonic materials with large optical constants are notably scarce. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Gate-Tunable Optical Anisotropy in Wafer-Scale, Aligned Carbon-Nanotube Films

Authors: Jason Lynch, Evan Smith, Adam Alfieri, Baokun Song, Cindy Yueli Chen, Chavez Lawrence, Cherie Kagan, Honggang Gu, Shiyuan Liu, Lian-Mao Peng, Shivashankar Vangala, Joshua R. Hendrickson, Deep Jariwala

Abstract: Telecommunications and polarimetry both require the active control of the polarization of light, Currently, this is done by combining intrinsically anisotropic materials with tunable isotropic materials into heterostructures using complicated fabrication techniques due to the lack of scalable materials that possess both properties. Tunable birefringent and dichromic materials are scarce and rarely… ▽ More Telecommunications and polarimetry both require the active control of the polarization of light, Currently, this is done by combining intrinsically anisotropic materials with tunable isotropic materials into heterostructures using complicated fabrication techniques due to the lack of scalable materials that possess both properties. Tunable birefringent and dichromic materials are scarce and rarely available in high-quality thin films over wafer scales. In this paper, we report semiconducting, highly aligned, single-walled carbon nanotubes (SWCNTs) over 4" wafers with normalized birefringence and dichroism values 0.09 and 0.58, respectively. The real and imaginary parts of the refractive index of the SWCNT films are tuned by up to 5.9% and 14.3% in the infrared at 2200 nm and 1660 nm, respectively, using electrostatic doping. Our results suggest that aligned SWCNTs are among the most anisotropic and tunable optical materials known and opens new avenues for their application in integrated photonics and telecommunications. △ Less

Submitted 17 April, 2023; originally announced April 2023.

The S-Web Origin of Composition Enhancement in the Slow-to-Moderate Speed Solar Wind

Authors: B. J. Lynch, N. M. Viall, A. K. Higginson, L. Zhao, S. T. Lepri, X. Sun

Abstract: Connecting the solar wind observed throughout the heliosphere to its origins in the solar corona is one of the central aims of heliophysics. The variability in the magnetic field, bulk plasma, and heavy ion composition properties of the slow wind are thought to result from magnetic reconnection processes in the solar corona. We identify regions of enhanced variability and composition in the solar… ▽ More Connecting the solar wind observed throughout the heliosphere to its origins in the solar corona is one of the central aims of heliophysics. The variability in the magnetic field, bulk plasma, and heavy ion composition properties of the slow wind are thought to result from magnetic reconnection processes in the solar corona. We identify regions of enhanced variability and composition in the solar wind from 2003 April 15 to May 13 (Carrington Rotation 2002), observed by the Wind and Advanced Composition Explorer spacecraft, and demonstrate their relationship to the Separatrix-Web (S-Web) structures describing the corona's large-scale magnetic topology. There are four pseudostreamer (PS) wind intervals and two helmet streamer (HS) heliospheric current sheet/plasma sheet crossings (and an ICME) which all exhibit enhanced alpha-to-proton ratios and/or elevated ionic charge states of carbon, oxygen, and iron. We apply the magnetic helicity-partial variance of increments ($H_m$-PVI) procedure to identify coherent magnetic structures and quantify their properties during each interval. The mean duration of these structures are $\sim$1 hr in both the HS and PS wind. We find a modest enhancement above the power-law fit to the PVI waiting time distribution in the HS-associated wind at the 1.5-2 hr timescales that is absent from the PS intervals. We discuss our results in context of previous observations of the $\sim$90 min periodic density structures in the slow solar wind, further development of the dynamic S-Web model, and future Parker Solar Probe and Solar Orbiter joint observational campaigns. △ Less

Submitted 11 March, 2023; originally announced March 2023.

Comments: 19 pages, 8 figures, accepted for publication in ApJ

Journal ref: ApJ 949, 14, 2023

Wafer-scale growth of two-dimensional, phase-pure InSe

Authors: Seunguk Song, Sungho Jeon, Mahfujur Rahaman, Jason Lynch, Pawan Kumar, Srikrishna Chakravarthi, Gwangwoo Kim, Xingyu Du, Eric Blanton, Kim Kisslinger, Michael Snure, Nicholas R. Glavin, Eric A. Stach, Roy H. Olsson, Deep Jariwala

Abstract: Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the d… ▽ More Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the difficulties in promoting lateral growth. Here, we report the first polymorph-selective synthesis of epitaxial 2D InSe by metal-organic chemical deposition (MOCVD) over 2 inch diameter sapphire wafers. We achieve thickness-controlled, layer-by-layer epitaxial growth of InSe on c-plane sapphire via dynamic pulse control of Se/In flux ratio. The layer-by-layer growth allows thickness control over wafer scale with tunable optical properties comparable to bulk crystals. Finally, the gate-tunable electrical transport suggests that MOCVD-grown InSe could be a potential channel material for back-end-of-line integration in logic transistors with field-effect mobility comparable to single-crystalline flakes. △ Less

Submitted 4 March, 2023; originally announced March 2023.

Comments: MS + SI

Charge and Energy Transfer Dynamics of Hybridized Exciton-Polaritons in 2D Halide Perovskites

Authors: Surendra B. Anantharaman, Jason Lynch, Christopher E. Stevens, Christopher Munley, Chentao Li, Jin Hou, Hao Zhang, Andrew Torma, Thomas Darlington, Francis Coen, Kevin Li, Arka Majumdar, P. James Schuck, Aditya Mohite, Hayk Harutyunyan, Joshua R. Hendrickson, Deep Jariwala

Abstract: Excitons, bound electron-hole pairs, in Two-Dimensional Hybrid Organic Inorganic Perovskites (2D HOIPs) are capable of forming hybrid light-matter states known as exciton-polaritons (E-Ps) when the excitonic medium is confined in an optical cavity. In the case of 2D HOIPs, they can self-hybridize into E-Ps at specific thicknesses of the HOIP crystals that form a resonant optical cavity with the ex… ▽ More Excitons, bound electron-hole pairs, in Two-Dimensional Hybrid Organic Inorganic Perovskites (2D HOIPs) are capable of forming hybrid light-matter states known as exciton-polaritons (E-Ps) when the excitonic medium is confined in an optical cavity. In the case of 2D HOIPs, they can self-hybridize into E-Ps at specific thicknesses of the HOIP crystals that form a resonant optical cavity with the excitons. However, the fundamental properties of these self-hybridized E-Ps in 2D HOIPs, including their role in ultrafast energy and/or charge transfer at interfaces, remain unclear. Here, we demonstrate that > 0.5 um thick 2D HOIP crystals on Au substrates are capable of supporting multiple-orders of self-hybridized E-P modes. These E-Ps have high Q factors (> 100) and modulate the optical dispersion for the crystal to enhance sub-gap absorption and emission. Through varying excitation energy and ultrafast measurements, we also confirm energy transfer from higher energy upper E-Ps to lower energy, lower E-Ps. Finally, we also demonstrate that E-Ps are capable of charge transport and transfer at interfaces. Our findings provide new insights into charge and energy transfer in E-Ps opening new opportunities towards their manipulation for polaritonic devices. △ Less

Submitted 18 February, 2023; originally announced February 2023.

Comments: 5 figures plus supporting information

How Good Can 2D Excitonic Solar Cells Be?

Authors: Zekun Hu, Da Lin, Jason Lynch, Kevin Xu, Deep Jariwala

Abstract: Excitonic semiconductors have been a subject of research for photovoltaic applications for many decades. Among them, the organic polymers and small molecules based solar cells have now exceeded 19% power conversion efficiency (PCE). While organic photovoltaics (OPVs) are approaching maturity, the advent of strongly excitonic inorganic semiconductors such as two-dimensional transition metal dichalc… ▽ More Excitonic semiconductors have been a subject of research for photovoltaic applications for many decades. Among them, the organic polymers and small molecules based solar cells have now exceeded 19% power conversion efficiency (PCE). While organic photovoltaics (OPVs) are approaching maturity, the advent of strongly excitonic inorganic semiconductors such as two-dimensional transition metal dichalcogenides (TMDCs) has renewed interest in excitonic solar cells due to their high-optical constants, stable inorganic structure and sub-nm film thicknesses. While several reports have been published on TMDC based PVs, achieving power conversion efficiencies higher than 6% under one-sun AM1.5G illumination has remained challenging. Here, we perform a full optical and electronic analysis of design, structure and performance of monolayer TMDC based, single-junction excitonic PVs. Our computational model with optimized properties predicts a PCE of 9.22% in a superlattice device structure. Our analysis suggests that, while the PCE for 2D excitonic solar cells may be limited to < 10%, a specific power > 100 W g-1 may be achieved with our proposed designs, making them attractive in aerospace, distributed remote sensing, and wearable electronics. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Comments: Manuscript plus supplement

Ultra-compact plexcitonic electro-absorption modulator

Authors: Ruoyu Yuan, Jason Lynch, Deep Jariwala

Abstract: Compact electro-optic (EO) modulators with large extinction ratios, low-switching energies, and high operation speeds are desirable for integrated photonic and linear optical computing. Traditional 3D semiconductors and dielectrics are unsuitable for achieving such modulators due to the small magnitude of EO effects in them. Excitonic 2D semiconductors present a unique opportunity in this regard g… ▽ More Compact electro-optic (EO) modulators with large extinction ratios, low-switching energies, and high operation speeds are desirable for integrated photonic and linear optical computing. Traditional 3D semiconductors and dielectrics are unsuitable for achieving such modulators due to the small magnitude of EO effects in them. Excitonic 2D semiconductors present a unique opportunity in this regard given their large and tunable optical constants near the excitonic resonances. However, strategies for confining and electrically tuning the excitons into compact EO modulators have not been realized thus far. Here, we design and simulate an ultra-compact, plexcitonic (strongly-coupled exciton-plasmon) electro-absorption modulator (EAM) with a sub-micron linear footprint operating close to the excitonic peak of the WS2 monolayer (641 nm) hybridized with the plasmon mode of a silver slot waveguide. Electrostatically injected free carriers in WS2 modulate the light-matter interaction via Coulomb screening of the excitons as well as promoting the formation of charged excitons (trions). For our optimized designs, the EAM is expected to achieve a 9.1 dBでしべる extinction ratio, concurrently with a 7.6 dBでしべる insertion loss in a 400 nm lateral footprint operating with a predicted < 3 fJ/bit switching energy at 15 GHz for 3-dB bandwidth modulation. Our work shows the potential of plexcitonic quasi-particles for integrated optical modulators. △ Less

Submitted 24 January, 2023; originally announced January 2023.

Comments: 12 pages, 5 figures and 1 table for the primary manuscript, 1 figure and 1 table for the supplementary information

Connecting Solar and Stellar Flares/CMEs: Expanding Heliophysics to Encompass Exoplanetary Space Weather

Authors: B. J. Lynch, B. E. Wood, M. Jin, T. Török, X. Sun, E. Palmerio, R. A. Osten, A. A. Vidotto, O. Cohen, J. D. Alvarado-Gómez, J. J. Drake, V. S. Airapetian, Y. Notsu, A. Veronig, K. Namekata, R. M. Winslow, L. K. Jian, A. Vourlidas, N. Lugaz, N. Al-Haddad, W. B. Manchester, C. Scolini, C. J. Farrugia, E. E. Davies, T. Nieves-Chinchilla , et al. (3 additional authors not shown)

Abstract: The aim of this white paper is to briefly summarize some of the outstanding gaps in the observations and modeling of stellar flares, CMEs, and exoplanetary space weather, and to discuss how the theoretical and computational tools and methods that have been developed in heliophysics can play a critical role in meeting these challenges. The maturity of data-inspired and data-constrained modeling of… ▽ More The aim of this white paper is to briefly summarize some of the outstanding gaps in the observations and modeling of stellar flares, CMEs, and exoplanetary space weather, and to discuss how the theoretical and computational tools and methods that have been developed in heliophysics can play a critical role in meeting these challenges. The maturity of data-inspired and data-constrained modeling of the Sun-to-Earth space weather chain provides a natural starting point for the development of new, multidisciplinary research and applications to other stars and their exoplanetary systems. Here we present recommendations for future solar CME research to further advance stellar flare and CME studies. These recommendations will require institutional and funding agency support for both fundamental research (e.g. theoretical considerations and idealized eruptive flare/CME numerical modeling) and applied research (e.g. data inspired/constrained modeling and estimating exoplanetary space weather impacts). In short, we recommend continued and expanded support for: (1.) Theoretical and numerical studies of CME initiation and low coronal evolution, including confinement of "failed" eruptions; (2.) Systematic analyses of Sun-as-a-star observations to develop and improve stellar CME detection techniques and alternatives; (3.) Improvements in data-inspired and data-constrained MHD modeling of solar CMEs and their application to stellar systems; and (4.) Encouraging comprehensive solar--stellar research collaborations and conferences through new interdisciplinary and multi-agency/division funding mechanisms. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Comments: 9 pages, 5 figures, white paper submitted to the Heliophysics 2024--2033 Decadal Survey

Journal ref: Bulletin of the American Astronomical Society, 55(3), 254, 2023

CME Evolution in the Structured Heliosphere and Effects at Earth and Mars During Solar Minimum

Authors: Erika Palmerio, Christina O. Lee, Ian G. Richardson, Teresa Nieves-Chinchilla, Luiz F. G. Dos Santos, Jacob R. Gruesbeck, Nariaki V. Nitta, M. Leila Mays, Jasper S. Halekas, Cary Zeitlin, Shaosui Xu, Mats Holmström, Yoshifumi Futaana, Tamitha Mulligan, Benjamin J. Lynch, Janet G. Luhmann

Abstract: The activity of the Sun alternates between a solar minimum and a solar maximum, the former corresponding to a period of "quieter" status of the heliosphere. During solar minimum, it is in principle more straightforward to follow eruptive events and solar wind structures from their birth at the Sun throughout their interplanetary journey. In this paper, we report analysis of the origin, evolution,… ▽ More The activity of the Sun alternates between a solar minimum and a solar maximum, the former corresponding to a period of "quieter" status of the heliosphere. During solar minimum, it is in principle more straightforward to follow eruptive events and solar wind structures from their birth at the Sun throughout their interplanetary journey. In this paper, we report analysis of the origin, evolution, and heliospheric impact of a series of solar transient events that took place during the second half of August 2018, i.e. in the midst of the late declining phase of Solar Cycle 24. In particular, we focus on two successive coronal mass ejections (CMEs) and a following high-speed stream (HSS) on their way towards Earth and Mars. We find that the first CME impacted both planets, whilst the second caused a strong magnetic storm at Earth and went on to miss Mars, which nevertheless experienced space weather effects from the stream interacting region (SIR) preceding the HSS. Analysis of remote-sensing and in-situ data supported by heliospheric modelling suggests that CME--HSS interaction resulted in the second CME rotating and deflecting in interplanetary space, highlighting that accurately reproducing the ambient solar wind is crucial even during "simpler" solar minimum periods. Lastly, we discuss the upstream solar wind conditions and transient structures responsible for driving space weather effects at Earth and Mars. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Comments: 27 pages, 7 figures, 1 table, accepted for publication in Space Weather

Ultrathin Broadband Metasurface Superabsorbers from a van der Waals Semimetal

Authors: Adam D. Alfieri, Michael J. Motala, Michael Snure, Jason Lynch, Pawan Kumar, Huiqin Zhang, Susanna Post, Christopher Muratore, Joshua R. Hendrickson, Nicholas R. Glavin, Deep Jariwala

Abstract: Metamaterials and metasurfaces operating in the visible and near-infrared (NIR) offer a promising route towards next-generation photodetectors and devices for solar energy harvesting. While numerous metamaterials and metasurfaces using metals and semiconductors have been demonstrated, semimetals-based metasurfaces in the vis-NIR range are notably missing. Here, we experimentally demonstrate a broa… ▽ More Metamaterials and metasurfaces operating in the visible and near-infrared (NIR) offer a promising route towards next-generation photodetectors and devices for solar energy harvesting. While numerous metamaterials and metasurfaces using metals and semiconductors have been demonstrated, semimetals-based metasurfaces in the vis-NIR range are notably missing. Here, we experimentally demonstrate a broadband metasurface superabsorber based on large area, semimetallic, van der Waals PtSe2 thin films in agreement with electromagnetic simulations. Our results show that PtSe2 is an ultrathin and scalable semimetal that concurrently possesses high index and high extinction across the vis-NIR range. Consequently, the thin-film PtSe2 on a reflector separated by a dielectric spacer can absorb > 85 % for the unpatterned case and ~97 % for the optimized 2D metasurface in the 400-900 nm range making it one of the strongest and thinnest broadband perfect absorbers to date. Our results present a scalable approach to photodetection and solar energy harvesting, demonstrating the practical utility of high index, high extinction semimetals for nanoscale optics. △ Less

Submitted 28 August, 2022; originally announced August 2022.

Direct Nano-Imaging of Light-Matter Interactions in Nanoscale Excitonic Emitters

Authors: Kiyoung Jo, Emanuele Marino, Jason Lynch, Zhiqiao Jiang, Natalie Gogotsi, Thomas P. Darlington, Mohammad Soroush, P. James Schuck, Nicholas J. Borys, Christopher Murray, Deep Jariwala

Abstract: Strong light-matter interactions in localized nano-emitters when placed near metallic mirrors have been widely reported via spectroscopic studies in the optical far-field. Here, we report a near-field nano-spectroscopic study of the localized nanoscale emitters on a flat Au substrate. We observe strong-coupling of the excitonic dipoles in quasi 2-dimensional CdSe/CdxZnS1-xS nanoplatelets with gap… ▽ More Strong light-matter interactions in localized nano-emitters when placed near metallic mirrors have been widely reported via spectroscopic studies in the optical far-field. Here, we report a near-field nano-spectroscopic study of the localized nanoscale emitters on a flat Au substrate. We observe strong-coupling of the excitonic dipoles in quasi 2-dimensional CdSe/CdxZnS1-xS nanoplatelets with gap mode plasmons formed between the Au tip and substrate. We also observe directional propagation on the Au substrate of surface plasmon polaritons launched from the excitons of the nanoplatelets as wave-like fringe patterns in the near-field photoluminescence maps. These fringe patterns were confirmed via extensive electromagnetic wave simulations to be standing-waves formed between the tip and the emitter on the substrate plane. We further report that both light confinement and the in-plane emission can be engineered by tuning the surrounding dielectric environment of the nanoplatelets. Our results lead to renewed understanding of in-plane, near-field electromagnetic signal transduction from the localized nano-emitters with profound implications in nano and quantum photonics as well as resonant optoelectronics. △ Less

Submitted 20 August, 2022; originally announced August 2022.

Comments: manuscript + supporting information

Tutorial: Exciton resonances for atomically-thin optics

Authors: Jason Lynch, Ludovica Guarneri, Deep Jariwala, Jorik van de Groep

Abstract: Metasurfaces enable flat optical elements by leveraging optical resonances in metallic or dielectric nanoparticles to obtain accurate control over the amplitude and phase of the scattered light. While highly efficient, these resonances are static and difficult to tune actively. Exciton resonances in atomically thin 2D semiconductors provide a novel and uniquely strong resonant light-matter interac… ▽ More Metasurfaces enable flat optical elements by leveraging optical resonances in metallic or dielectric nanoparticles to obtain accurate control over the amplitude and phase of the scattered light. While highly efficient, these resonances are static and difficult to tune actively. Exciton resonances in atomically thin 2D semiconductors provide a novel and uniquely strong resonant light-matter interaction, which presents a new opportunity for optical metasurfaces. Their resonant properties are intrinsic to the band structure of the material and do not rely on nanoscale patterns and are highly tunable using external stimuli. In this tutorial, we present the role that excitons resonances can play for atomically-thin optics. We describe the essentials of metasurface physics, provide a background on exciton physics, as well as a comprehensive overview of excitonic materials. Excitons demonstrate to provide new degrees of freedom and enhanced light-matter interactions in hybrid metasurfaces through coupling with metallic and dielectric metasurfaces. Using the high sensitivity of excitons to the medium's electron density, the first demonstrations of electrically-tunable nanophotonic devices and atomically-thin optical elements are also discussed. The future of excitons in metasurfaces looks promising, while the main challenge lies in large-area growth and precise integration of high-quality materials. △ Less

Submitted 24 June, 2022; originally announced June 2022.

Journal ref: Journal of Applied Physics 132, 091102 (2022)

Eruption and Interplanetary Evolution of a Stealthy Streamer-Blowout CME Observed by PSP at ${\sim}$0.5~AUえーゆー

Authors: Sanchita Pal, Benjamin J. Lynch, Simon W. Good, Erika Palmerio, Eleanna Asvestari, Jens Pomoell, Michael L. Stevens, Emilia K. J. Kilpua

Abstract: Streamer-blowout coronal mass ejections (SBO-CMEs) are the dominant CME population during solar minimum. Although they are typically slow and lack clear low-coronal signatures, they can cause geomagnetic storms. With the aid of extrapolated coronal fields and remote observations of the off-limb low corona, we study the initiation of an SBO-CME preceded by consecutive CME eruptions consistent with… ▽ More Streamer-blowout coronal mass ejections (SBO-CMEs) are the dominant CME population during solar minimum. Although they are typically slow and lack clear low-coronal signatures, they can cause geomagnetic storms. With the aid of extrapolated coronal fields and remote observations of the off-limb low corona, we study the initiation of an SBO-CME preceded by consecutive CME eruptions consistent with a multi-stage sympathetic breakout scenario. From inner-heliospheric Parker Solar Probe (PSP) observations, it is evident that the SBO-CME is interacting with the heliospheric magnetic field and plasma sheet structures draped about the CME flux rope. We estimate that $18 \, \pm \, 11\%$ of the CME's azimuthal magnetic flux has been eroded through magnetic reconnection and that this erosion began after a heliospheric distance of ${\sim}0.35$ AUえーゆー from the Sun was reached. This observational study has important implications for understanding the initiation of SBO-CMEs and their interaction with the heliospheric surroundings. △ Less

Submitted 16 May, 2022; originally announced May 2022.

Comments: 21 pages, 6 figures, 3 videos

PSP/IS$\odot$IS Observation of a Solar Energetic Particle Event Associated With a Streamer Blowout Coronal Mass Ejection During Encounter 6

Authors: T. Getachew, D. J. McComas, C. J. Joyce, E. Palmerio, E. R. Christian, C. M. S. Cohen, M. I. Desai, J. Giacalone, M. E. Hill, W. H. Matthaeus, R. L. McNutt, D. G. Mitchell, J. G. Mitchell, J. S. Rankin, E. C. Roelof, N. A. Schwadron, J. R. Szalay, G. P. Zank, L. -L. Zhao, B. J. Lynch, T. D. Phan, S. D. Bale, P. L. Whittlesey, J. C. Kasper

Abstract: In this paper we examine a low-energy SEP event observed by IS$\odot$IS's Energetic Particle Instrument-Low (EPI-Lo) inside 0.18 AUえーゆー on September 30, 2020. This small SEP event has a very interesting time profile and ion composition. Our results show that the maximum energy and peak in intensity is observed mainly along the open radial magnetic field. The event shows velocity dispersion, and strong… ▽ More In this paper we examine a low-energy SEP event observed by IS$\odot$IS's Energetic Particle Instrument-Low (EPI-Lo) inside 0.18 AUえーゆー on September 30, 2020. This small SEP event has a very interesting time profile and ion composition. Our results show that the maximum energy and peak in intensity is observed mainly along the open radial magnetic field. The event shows velocity dispersion, and strong particle anisotropies are observed throughout the event showing that more particles are streaming outward from the Sun. We do not see a shock in the in-situ plasma or magnetic field data throughout the event. Heavy ions, such as O and Fe were detected in addition to protons and 4He, but without significant enhancements in 3He or energetic electrons. Our analysis shows that this event is associated with a slow streamer-blowout coronal mass ejection (SBO-CME) and the signatures of this small CME event are consistent with those typical of larger CME events. The time-intensity profile of this event shows that PSP encountered the western flank of the SBO-CME. The anisotropic and dispersive nature of this event in a shockless local plasma give indications that these particles are most likely accelerated remotely near the Sun by a weak shock or compression wave ahead of the SBO-CME. This event may represent direct observations of the source of low-energy SEP seed particle population. △ Less

Submitted 8 December, 2021; originally announced December 2021.

Comments: 25 pages, 8 figures

Understanding the Origins of Problem Geomagnetic Storms Associated With "Stealth" Coronal Mass Ejections

Authors: Nariaki V. Nitta, Tamitha Mulligan, Emilia K. J. Kilpua, Benjamin J. Lynch, Marilena Mierla, Jennifer O'Kane, Paolo Pagano, Erika Palmerio, Jens Pomoell, Ian G. Richardson, Luciano Rodriguez, Alexis P. Rouillard, Suvadip Sinha, Nandita Srivastava, Dana-Camelia Talpeanu, Stephanie L. Yardley, Andrei N. Zhukov

Abstract: Geomagnetic storms are an important aspect of space weather and can result in significant impacts on space- and ground-based assets. The majority of strong storms are associated with the passage of interplanetary coronal mass ejections (ICMEs) in the near-Earth environment. In many cases, these ICMEs can be traced back unambiguously to a specific coronal mass ejection (CME) and solar activity on t… ▽ More Geomagnetic storms are an important aspect of space weather and can result in significant impacts on space- and ground-based assets. The majority of strong storms are associated with the passage of interplanetary coronal mass ejections (ICMEs) in the near-Earth environment. In many cases, these ICMEs can be traced back unambiguously to a specific coronal mass ejection (CME) and solar activity on the frontside of the Sun. Hence, predicting the arrival of ICMEs at Earth from routine observations of CMEs and solar activity currently makes a major contribution to the forecasting of geomagnetic storms. However, it is clear that some ICMEs, which may also cause enhanced geomagnetic activity, cannot be traced back to an observed CME, or, if the CME is identified, its origin may be elusive or ambiguous in coronal images. Such CMEs have been termed "stealth CMEs." In this review, we focus on these "problem" geomagnetic storms in the sense that the solar/CME precursors are enigmatic and stealthy. We start by reviewing evidence for stealth CMEs discussed in past studies. We then identify several moderate to strong geomagnetic storms (minimum Dst < -50 nT) in solar cycle 24 for which the related solar sources and/or CMEs are unclear and apparently stealthy. We discuss the solar and in situ circumstances of these events and identify several scenarios that may account for their elusive solar signatures. These range from observational limitations (e.g., a coronagraph near Earth may not detect an incoming CME if it is diffuse and not wide enough) to the possibility that there is a class of mass ejections from the Sun that have only weak or hard-to-observe coronal signatures. In particular, some of these sources are only clearly revealed by considering the evolution of coronal structures over longer time intervals than is usually considered. We also review a variety of numerical modelling approaches... △ Less

Submitted 15 October, 2021; originally announced October 2021.

Comments: 60 pages, 25 figures, 5 tables. Accepted for publication in Space Science Reviews

Journal ref: Space Sci Rev 217, 82 (2021)

Linking the Sun to the Heliosphere Using Composition Data and Modelling. A Test Case with a Coronal Jet

Authors: Susanna Parenti, Iulia Chifu, Giulio Del Zanna, Justin Edmondson, Alessandra Giunta, Viggo H. Hansteen, Aleida Higginson, J. Martin Laming, Susan T. Lepri, Benjamin J. Lynch, Yeimy J. Rivera, Rudolf von Steiger, Thomas Wiegelmann, Robert F. Wimmer-Schweingruber, Natalia Zambrana Prado, Gabriel Pelouze

Abstract: Our understanding of the formation and evolution of the corona and the heliosphere is linked to our capability of properly interpreting the data from remote sensing and in-situ observations. In this respect, being able to correctly connect in-situ observations with their source regions on the Sun is the key for solving this problem. In this work we aim at testing a diagnostics method for this conn… ▽ More Our understanding of the formation and evolution of the corona and the heliosphere is linked to our capability of properly interpreting the data from remote sensing and in-situ observations. In this respect, being able to correctly connect in-situ observations with their source regions on the Sun is the key for solving this problem. In this work we aim at testing a diagnostics method for this connectivity. This paper makes use of a coronal jet observed on 2010 August 2nd in active region 11092 as a test for our connectivity method. This combines solar EUV and in-situ data together with magnetic field extrapolation, large scale MHD modeling and FIP (First Ionization Potential) bias modeling to provide a global picture from the source region of the jet to its possible signatures at 1AUえーゆー. Our data analysis reveals the presence of outflow areas near the jet which are within open magnetic flux regions and which present FIP bias consistent with the FIP model results. In our picture, one of these open areas is the candidate jet source. Using a back-mapping technique we identified the arrival time of this solar plasma at the ACE spacecraft. The in-situ data show signatures of changes in the plasma and magnetic field parameters, with FIP bias consistent with the possible passage of the jet material. Our results highlight the importance of remote sensing and in-situ coordinated observations as a key to solve the connectivity problem. We discuss our results in view of the recent Solar Orbiter launch which is currently providing such unique data. △ Less

Submitted 12 October, 2021; originally announced October 2021.

Comments: 53 pages, 15 figures, 5 tables, accepted for publication in Space Science Reviews

Journal ref: Space Sci Rev 217, 78 (2021)

Predicting the Magnetic Fields of a Stealth CME Detected by Parker Solar Probe at 0.5 AUえーゆー

Authors: Erika Palmerio, Christina Kay, Nada Al-Haddad, Benjamin J. Lynch, Wenyuan Yu, Michael L. Stevens, Sanchita Pal, Christina O. Lee

Abstract: Stealth coronal mass ejection (CMEs) are eruptions from the Sun that are not associated with appreciable low-coronal signatures. Because they often cannot be linked to a well-defined source region on the Sun, analysis of their initial magnetic configuration and eruption dynamics is particularly problematic. In this manuscript, we address this issue by undertaking the first attempt at predicting th… ▽ More Stealth coronal mass ejection (CMEs) are eruptions from the Sun that are not associated with appreciable low-coronal signatures. Because they often cannot be linked to a well-defined source region on the Sun, analysis of their initial magnetic configuration and eruption dynamics is particularly problematic. In this manuscript, we address this issue by undertaking the first attempt at predicting the magnetic fields of a stealth CME that erupted in 2020 June from the Earth-facing Sun. We estimate its source region with the aid of off-limb observations from a secondary viewpoint and photospheric magnetic field extrapolations. We then employ the Open Solar Physics Rapid Ensemble Information (OSPREI) modelling suite to evaluate its early evolution and forward-model its magnetic fields up to Parker Solar Probe, which detected the CME in situ at a heliocentric distance of 0.5 AUえーゆー. We compare our hindcast prediction with in-situ measurements and a set of flux rope reconstructions, obtaining encouraging agreement on arrival time, spacecraft crossing location, and magnetic field profiles. This work represents a first step towards reliable understanding and forecasting of the magnetic configuration of stealth CMEs and slow, streamer-blowout events. △ Less

Submitted 10 September, 2021; originally announced September 2021.

Comments: 9 pages, 4 figures, 1 table, accepted for publication in The Astrophysical Journal

Self-Hybridized Polaritonic Emission from Layered Perovskites

Authors: Surendra B. Anantharaman, Christopher E. Stevens, Jason Lynch, Baokun Song, Jin Hou, Huiqin Zhang, Kiyoung Jo, Pawan Kumar, Jean-Christophe Blancon, Aditya D. Mohite, Joshua R. Hendrickson, Deep Jariwala

Abstract: Light-matter coupling in excitonic materials has been the subject of intense investigation due to emergence of new excitonic materials. Two-dimensional layered hybrid organic/inorganic perovskites (2D HOIPs) support strongly bound excitons at room-temperatures with some of the highest oscillator strengths and electric loss tangents among the known excitonic materials. Here, we report strong light-… ▽ More Light-matter coupling in excitonic materials has been the subject of intense investigation due to emergence of new excitonic materials. Two-dimensional layered hybrid organic/inorganic perovskites (2D HOIPs) support strongly bound excitons at room-temperatures with some of the highest oscillator strengths and electric loss tangents among the known excitonic materials. Here, we report strong light-matter coupling in Ruddlesden-Popper phase 2D-HOIPs crystals without the necessity of an external cavity. We report concurrent occurrence of multiple-orders of hybrid light-matter states via both reflectance and luminescence spectroscopy in thick (> 100 nm) crystals and near-unity absorption in thin (< 20 nm) crystals. We observe resonances with quality factors > 250 in hybridized exciton-polaritons and identify a linear correlation between exciton-polariton mode splitting and extinction coefficient of the various 2D-HOIPs. Our work opens the door to studying polariton dynamics in self-hybridized and open cavity systems with broad applications in optoelectronics and photochemistry. △ Less

Submitted 13 May, 2021; originally announced May 2021.

Journal ref: Nano Letters 2021

Modeling a Coronal Mass Ejection from an Extended Filament Channel. I. Eruption and Early Evolution

Authors: Benjamin J. Lynch, Erika Palmerio, C. Richard DeVore, Maria D. Kazachenko, Joel T. Dahlin, Jens Pomoell, Emilia K. J. Kilpua

Abstract: We present observations and modeling of the magnetic field configuration, morphology, and dynamics of a large-scale, high-latitude filament eruption observed by the Solar Dynamics Observatory. We analyze the 2015 July 9-10 filament eruption and the evolution of the resulting coronal mass ejection (CME) through the solar corona. The slow streamer-blowout CME leaves behind an elongated post-eruption… ▽ More We present observations and modeling of the magnetic field configuration, morphology, and dynamics of a large-scale, high-latitude filament eruption observed by the Solar Dynamics Observatory. We analyze the 2015 July 9-10 filament eruption and the evolution of the resulting coronal mass ejection (CME) through the solar corona. The slow streamer-blowout CME leaves behind an elongated post-eruption arcade above the extended polarity inversion line that is only poorly visible in extreme ultraviolet (EUV) disk observations and does not resemble a typical bright flare-loop system. Magnetohydrodynamic (MHD) simulation results from our data-inspired modeling of this eruption compare favorably with the EUV and white-light coronagraph observations. We estimate the reconnection flux from the simulation's flare-arcade growth and examine the magnetic-field orientation and evolution of the erupting prominence, highlighting the transition from an erupting sheared-arcade filament channel into a streamer-blowout flux-rope CME. Our results represent the first numerical modeling of a global-scale filament eruption where multiple ambiguous and complex observational signatures in EUV and white light can be fully understood and explained with the MHD simulation. In this context, our findings also suggest that the so-called "stealth CME" classification, as a driver of unexpected or "problem" geomagnetic storms, belongs more to a continuum of observable/non-observable signatures than to separate or distinct eruption processes. △ Less

Submitted 17 April, 2021; originally announced April 2021.

Comments: 22 pages, 14 figures, 2 tables, accepted for publication in ApJ

Journal ref: Astrophys J., 914, 39, 2021

Current Overview of Statistical Fiber Bundles Model and Its Application to Physics-based Reliability Analysis of Thin-film Dielectrics

Authors: James U. Gleaton, David Han, James D. Lynch, Hon Keung Tony Ng, Fabrizio Ruggeri

Abstract: In this paper, we present a critical overview of statistical fiber bundles models. We discuss relevant aspects, like assumptions and consequences stemming from models in the literature and propose new ones. This is accomplished by concentrating on both the physical and statistical aspects of a specific load-sharing example, the breakdown (BD) for circuits of capacitors and related dielectrics. For… ▽ More In this paper, we present a critical overview of statistical fiber bundles models. We discuss relevant aspects, like assumptions and consequences stemming from models in the literature and propose new ones. This is accomplished by concentrating on both the physical and statistical aspects of a specific load-sharing example, the breakdown (BD) for circuits of capacitors and related dielectrics. For series and parallel/series circuits (series/parallel reliability systems) of ordinary capacitors, the load-sharing rules are derived from the electrical laws. This with the BD formalism is then used to obtain the BD distribution of the circuit. The BD distribution and Gibbs measure are given for a series circuit and the size effects are illustrated for simulations of series and parallel/series circuits. This is related to the finite weakest link adjustments for the BD distribution that arise in large series/parallel reliability load-sharing systems, such as dielectric BD, from their extreme value approximations. An elementary but in-depth discussion of the physical aspects of SiO$_2$ and HfO$_2$ dielectrics and cell models is given. This is used to study a load-sharing cell model for the BD of HfO$_2$ dielectrics and the BD formalism. The latter study is based on an analysis of Kim and Lee (2004)'s data for such dielectrics. Here, several BD distributions are compared in the analysis and proportional hazard regression models are used to study the BD formalism. In addition, some areas of open research are discussed. △ Less

Submitted 25 January, 2023; v1 submitted 9 April, 2021; originally announced April 2021.

Comments: The majority of the materials in the paper has been published as a book

Light-Matter Coupling in Scalable Van der Waals Superlattices

Authors: Pawan Kumar, Jason Lynch, Baokun Song, Haonan Ling, Francisco Barrera, Huiqin Zhang, Surendra B. Anantharaman, Jagrit Digani, Haoyue Zhu, Tanushree H. Choudhury, Clifford McAleese, Xiaochen Wang, Ben R. Conran, Oliver Whear, Michael J. Motala, Michael Snure, Christopher Muratore, Joan M. Redwing, Nicholas R. Glavin, Eric A. Stach, Artur R. Davoyan, Deep Jariwala

Abstract: Two-dimensional (2D) crystals have renewed opportunities in design and assembly of artificial lattices without the constraints of epitaxy. However, the lack of thickness control in exfoliated van der Waals (vdW) layers prevents realization of repeat units with high fidelity. Recent availability of uniform, wafer-scale samples permits engineering of both electronic and optical dispersions in stacks… ▽ More Two-dimensional (2D) crystals have renewed opportunities in design and assembly of artificial lattices without the constraints of epitaxy. However, the lack of thickness control in exfoliated van der Waals (vdW) layers prevents realization of repeat units with high fidelity. Recent availability of uniform, wafer-scale samples permits engineering of both electronic and optical dispersions in stacks of disparate 2D layers with multiple repeating units. We present optical dispersion engineering in a superlattice structure comprised of alternating layers of 2D excitonic chalcogenides and dielectric insulators. By carefully designing the unit cell parameters, we demonstrate > 90 % narrowband absorption in < 4 nm active layer excitonic absorber medium at room temperature, concurrently with enhanced photoluminescence in cm2 samples. These superlattices show evidence of strong light-matter coupling and exciton-polariton formation with geometry-tunable coupling constants. Our results demonstrate proof of concept structures with engineered optical properties and pave the way for a broad class of scalable, designer optical metamaterials from atomically-thin layers. △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: 4 figures + supporting

Dimensional analysis of spring-wing systems reveals performance metrics for resonant flapping-wing flight

Authors: James Lynch, Jeffrey Gau, Simon Sponberg, Nick Gravish

Abstract: Flapping-wing insects, birds, and robots are thought to offset the high power cost of oscillatory wing motion by using elastic elements for energy storage and return. Insects possess highly resilient elastic regions in their flight anatomy that may enable high dynamic efficiency. However, recent experiments highlight losses due to damping in the insect thorax that could reduce the benefit of those… ▽ More Flapping-wing insects, birds, and robots are thought to offset the high power cost of oscillatory wing motion by using elastic elements for energy storage and return. Insects possess highly resilient elastic regions in their flight anatomy that may enable high dynamic efficiency. However, recent experiments highlight losses due to damping in the insect thorax that could reduce the benefit of those elastic elements. We performed experiments on, and simulations of a dynamically-scaled robophysical flapping model with an elastic element and biologically-relevant structural damping to elucidate the roles of body mechanics, aerodynamics, and actuation in spring-wing energetics. We measured oscillatory flapping wing dynamics and energetics subject to a range of actuation parameters, system inertia, and spring elasticity. To generalize these results, we derive the non-dimensional spring-wing equation of motion and present variables that describe the resonance properties of flapping systems: $N$, a measure of the relative influence of inertia and aerodynamics, and $\hat{K}$, the reduced stiffness. We show that internal damping scales with $N$, revealing that dynamic efficiency monotonically decreases with increasing $N$. Based on these results, we introduce a general framework for understanding the roles of internal damping, aerodynamic and inertial forces, and elastic structures within all spring-wing systems. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Comments: 16 pages, 11 figures, plus supplemental material. Submitted to Royal Society Interface

Electron acceleration and radio emission following the early interaction of two coronal mass ejections

Authors: D. E. Morosan, E. Palmerio, J. E. Räsänen, E. K. J. Kilpua, J. Magdalenić, B. J. Lynch, A. Kumari, J. Pomoell, M. Palmroth

Abstract: Context. Coronal mass ejections (CMEs) are large eruptions of magnetised plasma from the Sun that are often accompanied by solar radio bursts produced by accelerated electrons. Aims. A powerful source for accelerating electron beams are CME-driven shocks, however, there are other mechanisms capable of accelerating electrons during a CME eruption. So far, studies have relied on the traditional clas… ▽ More Context. Coronal mass ejections (CMEs) are large eruptions of magnetised plasma from the Sun that are often accompanied by solar radio bursts produced by accelerated electrons. Aims. A powerful source for accelerating electron beams are CME-driven shocks, however, there are other mechanisms capable of accelerating electrons during a CME eruption. So far, studies have relied on the traditional classification of solar radio bursts into five groups (Type I-V) based mainly on their shapes and characteristics in dynamic spectra. Here, we aim to determine the origin of moving radio bursts associated with a CME that do not fit into the present classification of the solar radio emission. Methods. By using radio imaging from the Nançay Radioheliograph, combined with observations from the Solar Dynamics Observatory, Solar and Heliospheric Observatory, and Solar Terrestrial Relations Observatory spacecraft, we investigate the moving radio bursts accompanying two subsequent CMEs on 22 May 2013. We use three-dimensional reconstructions of the two associated CME eruptions to show the possible origin of the observed radio emission. Results. We identified three moving radio bursts at unusually high altitudes in the corona that are located at the northern CME flank and move outwards synchronously with the CME. The radio bursts correspond to fine-structured emission in dynamic spectra with durations of ~1 s, and they may show forward or reverse frequency drifts. Since the CME expands closely following an earlier CME, a low coronal CME-CME interaction is likely responsible for the observed radio emission. △ Less

Submitted 1 September, 2020; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: 14 pages, 13 figures

Journal ref: A&A 642, A151 (2020)

Nanosheet-stabilized emulsions: ultra-low loading segregated networks and surface energy determination of pristine few-layer 2D materials

Authors: Sean P. Ogilvie, Matthew J. Large, Adam J. Cass, Aline Amorim Graf, Anne C. Sehnal, Marcus A. O'Mara, Peter J. Lynch, Jonathan P. Salvage, Marco Alfonso, Philippe Poulin, Alice A. K. King, Alan B. Dalton

Abstract: A framework is developed to allow emulsification to be used to fabricate functional structures from, and study the properties of, pristine layered nanosheets. Liquid-exfoliated few-layer graphene and MoS2 are demonstrated to stablize emulsions which exhibit system-scale electrical conductivity at ultra-low nanosheet volume fractions. When deposited on a substrate, the controlled drying dynamics of… ▽ More A framework is developed to allow emulsification to be used to fabricate functional structures from, and study the properties of, pristine layered nanosheets. Liquid-exfoliated few-layer graphene and MoS2 are demonstrated to stablize emulsions which exhibit system-scale electrical conductivity at ultra-low nanosheet volume fractions. When deposited on a substrate, the controlled drying dynamics of these emulsions facilitates their application as inks where the lack of any coffee ring effect allows manual deposition of high conductivity films. In order to broaden the range of compositions and subsequently applications, an understanding of emulsion stability and orientation in terms of surface energy of the three phases is developed. Importantly, this model facilitates determination of the surface energies of the nanosheets themselves and subsequently allows design of emulsions. Finally, emulsification by surfactant-exfoliated nanosheets and emulsion inversion using basic solution are demonstrated to allow water-based processing where composition and orientation can be tailored to enable applications. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Modeling a Carrington-scale Stellar Superflare and Coronal Mass Ejection from $κかっぱ^{1}Cet$

Authors: Benjamin J. Lynch, Vladimir S. Airapetian, C. Richard DeVore, Maria D. Kazachenko, Teresa Lüftinger, Oleg Kochukhov, Lisa Rosén, William P. Abbett

Abstract: Observations from the Kepler mission have revealed frequent superflares on young and active solar-like stars. Superflares result from the large-scale restructuring of stellar magnetic fields, and are associated with the eruption of coronal material (a coronal mass ejection, or CME) and energy release that can be orders of magnitude greater than those observed in the largest solar flares. These cat… ▽ More Observations from the Kepler mission have revealed frequent superflares on young and active solar-like stars. Superflares result from the large-scale restructuring of stellar magnetic fields, and are associated with the eruption of coronal material (a coronal mass ejection, or CME) and energy release that can be orders of magnitude greater than those observed in the largest solar flares. These catastrophic events, if frequent, can significantly impact the potential habitability of terrestrial exoplanets through atmospheric erosion or intense radiation exposure at the surface. We present results from numerical modeling designed to understand how an eruptive superflare from a young solar-type star, $κかっぱ^{1}Cet$, could occur and would impact its astrospheric environment. Our data-inspired, three-dimensional magnetohydrodynamic modeling shows that global-scale shear concentrated near the radial-field polarity inversion line can energize the closed-field stellar corona sufficiently to power a global, eruptive superflare that releases approximately the same energy as the extreme 1859 Carrington event from the Sun. We examine proxy measures of synthetic emission during the flare and estimate the observational signatures of our CME-driven shock, both of which could have extreme space-weather impacts on the habitability of any Earth-like exoplanets. We also speculate that the observed 1986 Robinson-Bopp superflare from $κかっぱ^{1}Cet$ was perhaps as extreme for that star as the Carrington flare was for the Sun. △ Less

Submitted 30 July, 2019; v1 submitted 7 June, 2019; originally announced June 2019.

Comments: 16 pages, 12 figures, accepted for publication in ApJ

Journal ref: Astrophys. J., 880, 97, 2019

Magnetic Clouds: Solar Cycle Dependence, Sources, and Geomagnetic Impacts

Authors: Y. Li, J. G. Luhmann, B. J. Lynch

Abstract: Magnetic clouds (MCs) are transient magnetic structures giving the strongest southward magnetic field (Bz south) in the solar wind. The sheath regions of MCs may also carry southward magnetic field. Southward magnetic field is responsible for causing space-weather disturbances. We report a comprehensive analysis of MCs and Bz components in their sheath regions during 1995 to 2017. Eighty-five perc… ▽ More Magnetic clouds (MCs) are transient magnetic structures giving the strongest southward magnetic field (Bz south) in the solar wind. The sheath regions of MCs may also carry southward magnetic field. Southward magnetic field is responsible for causing space-weather disturbances. We report a comprehensive analysis of MCs and Bz components in their sheath regions during 1995 to 2017. Eighty-five percent of 303 MCs contain a south Bz up to 50 nT. Sheath Bz during the 23 years may reach as high as 40 nT. The MCs of strongest magnetic magnitude and Bz south occur in the declining phase of the solar cycle. The bipolar MCs have solar-cycle dependence in their polarity, but not in the occurrence frequency. Unipolar MCs show solar-cycle dependence in their occurrence frequency but not in their polarity. MCs with the highest speeds, largest total B magnitudes and sheath Bz south are from source regions closer to the solar disk center. About 80% of large Dst storms are caused by MC events. The combinations of south Bz in the sheath and the south-first MCs in close succession have given the largest storms. The solar-cycle dependence of bipolar MCs is extended to 2017, spanning 42 years. We find that the bipolar MC Bz polarity solar-cycle dependence is given by MCs originated from quiescent filaments in decayed active regions and a group of weak MCs of unclear sources, while the polarity of bipolar MCs with active-region flares always has mixed Bz polarity without solar-cycle dependence and is therefore the least predictable for Bz forecasting. △ Less

Submitted 14 September, 2018; v1 submitted 13 August, 2018; originally announced August 2018.

Comments: 24 pages, 10 figures, accepted for publication in Solar Physics

Journal ref: Solar Physics 293, 135, 2018

Power spectrum analysis of ionospheric fluctuations with the Murchison Widefield Array

Authors: Shyeh Tjing Loi, Cathryn M. Trott, Tara Murphy, Iver H. Cairns, Martin Bell, Natasha Hurley-Walker, John Morgan, Emil Lenc, A. R. Offringa, L. Feng, P. J. Hancock, D. L. Kaplan, N. Kudryavtseva, G. Bernardi, J. D. Bowman, F. Briggs, R. J. Cappallo, B. E. Corey, A. A. Deshpande, D. Emrich, B. M. Gaensler, R. Goeke, L. J. Greenhill, B. J. Hazelton, M. Johnston-Hollitt , et al. (23 additional authors not shown)

Abstract: Low-frequency, wide field-of-view (FoV) radio telescopes such as the Murchison Widefield Array (MWA) enable the ionosphere to be sampled at high spatial completeness. We present the results of the first power spectrum analysis of ionospheric fluctuations in MWA data, where we examined the position offsets of radio sources appearing in two datasets. The refractive shifts in the positions of celesti… ▽ More Low-frequency, wide field-of-view (FoV) radio telescopes such as the Murchison Widefield Array (MWA) enable the ionosphere to be sampled at high spatial completeness. We present the results of the first power spectrum analysis of ionospheric fluctuations in MWA data, where we examined the position offsets of radio sources appearing in two datasets. The refractive shifts in the positions of celestial sources are proportional to spatial gradients in the electron column density transverse to the line of sight. These can be used to probe plasma structures and waves in the ionosphere. The regional (10-100 km) scales probed by the MWA, determined by the size of its FoV and the spatial density of radio sources (typically thousands in a single FoV), complement the global (100-1000 km) scales of GPS studies and local (0.01-1 km) scales of radar scattering measurements. Our data exhibit a range of complex structures and waves. Some fluctuations have the characteristics of travelling ionospheric disturbances (TIDs), while others take the form of narrow, slowly-drifting bands aligned along the Earth's magnetic field. △ Less

Submitted 5 June, 2015; originally announced June 2015.

Comments: Accepted for publication in Radio Science

Realisation of a low frequency SKA Precursor: The Murchison Widefield Array

Authors: S. J. Tingay, R. Goeke, J. N. Hewitt, E. Morgan, R. A Remillard, C. L. Williams, J. D. Bowman, D. Emrich, S. M. Ord, T. Booler, B. Crosse, D. Pallot, W. Arcus, T. Colegate, P. J. Hall, D. Herne, M. J. Lynch, F. Schlagenhaufer, S. Tremblay, R. B. Wayth, M. Waterson, D. A. Mitchell, R. J. Sault, R. L. Webster, J. S. B. Wyithe , et al. (34 additional authors not shown)

Abstract: The Murchison Widefield Array is a low frequency (80 - 300 MHz) SKA Precursor, comprising 128 aperture array elements distributed over an area of 3 km diameter. The MWA is located at the extraordinarily radio quiet Murchison Radioastronomy Observatory in the mid-west of Western Australia, the selected home for the Phase 1 and Phase 2 SKA low frequency arrays. The MWA science goals include: 1) dete… ▽ More The Murchison Widefield Array is a low frequency (80 - 300 MHz) SKA Precursor, comprising 128 aperture array elements distributed over an area of 3 km diameter. The MWA is located at the extraordinarily radio quiet Murchison Radioastronomy Observatory in the mid-west of Western Australia, the selected home for the Phase 1 and Phase 2 SKA low frequency arrays. The MWA science goals include: 1) detection of fluctuations in the brightness temperature of the diffuse redshifted 21 cm line of neutral hydrogen from the epoch of reionisation; 2) studies of Galactic and extragalactic processes based on deep, confusion-limited surveys of the full sky visible to the array; 3) time domain astrophysics through exploration of the variable radio sky; and 4) solar imaging and characterisation of the heliosphere and ionosphere via propagation effects on background radio source emission. This paper will focus on a brief discussion of the as-built MWA system, highlighting several novel characteristics of the instrument, and a brief progress report (as of June 2012) on the final construction phase. Practical completion of the MWA is expected in November 2012, with commissioning commencing from approximately August 2012 and operations commencing near mid 2013. A brief description of recent science results from the MWA prototype instrument is given. △ Less

Submitted 6 December, 2012; originally announced December 2012.

Comments: 8 pages, Resolving the Sky - Radio Interferometry: Past, Present and Future - RTS2012, April 17-20, 2012, Manchester, UK

Advancing In Situ Modeling of ICMEs: New Techniques for New Observations

Authors: Tamitha Mulligan, Alysha A. Reinard, Benjamin J. Lynch

Abstract: It is generally known that multi-spacecraft observations of interplanetary coronal mass ejections (ICMEs) more clearly reveal their three-dimensional structure than do observations made by a single spacecraft. The launch of the STEREO twin observatories in October 2006 has greatly increased the number of multipoint studies of ICMEs in the literature, but this field is still in its infancy. To date… ▽ More It is generally known that multi-spacecraft observations of interplanetary coronal mass ejections (ICMEs) more clearly reveal their three-dimensional structure than do observations made by a single spacecraft. The launch of the STEREO twin observatories in October 2006 has greatly increased the number of multipoint studies of ICMEs in the literature, but this field is still in its infancy. To date, most studies continue to use on flux rope models that rely on single track observations through a vast, multi-faceted structure, which oversimplifies the problem and often hinders interpretation of the large-scale geometry, especially for cases in which one spacecraft observes a flux rope, while another does not. In order to tackle these complex problems, new modeling techniques are required. We describe these new techniques and analyze two ICMEs observed at the twin STEREO spacecraft on 22-23 May 2007, when the spacecraft were separated by ~8 degrees. We find a combination of non-force-free flux rope multi-spacecraft modeling, together with a new non-flux rope ICME plasma flow deflection model, better constrains the large-scale structure of these ICMEs. We also introduce a new spatial mapping technique that allows us to put multispacecraft observations and the new ICME model results in context with the convecting solar wind. What is distinctly different about this analysis is that it reveals aspects of ICME geometry and dynamics in a far more visually intuitive way than previously accomplished. In the case of the 22-23 May ICMEs, the analysis facilitates a more physical understanding of ICME large-scale structure, the location and geometry of flux rope sub-structures within these ICMEs, and their dynamic interaction with the ambient solar wind. △ Less

Submitted 25 August, 2012; originally announced August 2012.