-
Flux dependence of helium retention in clean W(110): Experimental evidence for He self-trapping
Authors:
A. Dunand,
M. Minissale,
T. Angot,
R. Bisson
Abstract:
Helium (He) retention in tungsten (W) is a concern in fusion reactors since it could be detrimental to plasma facing components performance and influence the fusion fuel balance. He being not soluble in W, it tends to agglomerate on preexisting defects (vacancy, grain boundary), but it could in theory also self-trap (be immobilized on a non-preexisting vacancy) through the emission of a vacancy/se…
▽ More
Helium (He) retention in tungsten (W) is a concern in fusion reactors since it could be detrimental to plasma facing components performance and influence the fusion fuel balance. He being not soluble in W, it tends to agglomerate on preexisting defects (vacancy, grain boundary), but it could in theory also self-trap (be immobilized on a non-preexisting vacancy) through the emission of a vacancy/self-interstitial W pair in the vicinity of a Hen interstitial cluster. In the present study, we prepared a pure single crystal W(110) sample with a clean surface in order to evidence the self-trapping of He in the W bulk at a sample temperature of 300 K and for a constant fluence of 2.0x10$^{21}$ He$^+$.m$^{-2}$. At a He$^+$ kinetic energy of 130 eV and a flux of 0.3x10$^{17}$ He$^+$.m$^{-2}$.s$^{-1}$, we only observed a small He desorption peak below 600 K. Rising the ion flux to 0.7x10$^{17}$ He$^+$.m$^{-2}$.s$^{-1}$, we observed the sudden appearance of two desorption peaks at 950 K and 1700 K. For the highest flux studied in this work, 5.0x10$^{17}$ He$^+$.m$^{-2}$.s$^{-1}$, an additional desorption peak at 1800 K and a desorption shoulder at 1900 K are observed. The temperature position of these He desorption peaks are consistent with the density functional theory literature and points to the occurrence of self-trapping once the 0.7x10$^{17}$ He$^+$.m$^{-2}$.s$^{-1}$ flux is attained at 300 K and to the possible realization of trap-mutation for the flux of 5.0x10$^{17}$ He$^+$.m$^{-2}$.s$^{-1}$. The present set of results should be used to constrain the development of He retention and He bubbles growth models based on ab initio quantities.
△ Less
Submitted 6 December, 2022;
originally announced December 2022.
-
Post-mortem analysis of tungsten plasma facing components in tokamaks: Raman microscopy measurements on compact, porous oxide and nitride films and nanoparticles
Authors:
Cédric Pardanaud,
David Dellasega,
Matteo Passoni,
Céline Martin,
Pascale Roubin,
Younès Addab,
Cécile Arnas,
Lénaïc Couëdel,
Marco Minissale,
Eric Salomon,
Gregory Giacometti,
Alexandre Merlen,
Elodie Bernard,
Rodrigo Mateus,
Eduardo Alves,
Zdravko Siketic,
Iva Bogdanović Radović,
Antti Hakola,
Eurofusion Pfc
Abstract:
Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, p…
▽ More
Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, porous) and nanoparticles and investigate the influence of their morphology on the measured Raman spectra. The amounts of oxygen and/or nitrogen in the films are also investigated. Comparative data are obtained by X-ray Photoelectrons Spectroscopy, Atomic Force Microscopy, Electron Microscopies (Scanning and Transmission), Energy Dispersive X-ray spectroscopy, Time-of-Flight Elastic Recoil Detection Analysis. The power density of the laser beam used to perform Raman microscopy is varied by up to 4 orders of magnitude (0.01-20 mW/$μ$m 2) to investigate thermal stability of films and nanoparticles. As a first result, we give evidence that Raman microscopy is sensitive enough to detect surface native oxides. Secondly, more tungsten oxides are detected in porous materials and nanoparticles than in compact films, and the intensities of the Raman band correlate to their oxygen content. Thirdly, thermal stability of these films (i.e. structural and chemical modification under laser heating) is poor when compact films contain a sufficiently large amount of nitrogen. This finding suggests that nitrogen can be substituted by oxygen during Raman laser induced heating occurring in ambient air. Finally, our methodology can be used to rapidly characterize morphology and chemistry of the samples analyzed, and also to create oxides at the micrometer scale. keywords: PLD, Raman spectroscopy, tungsten oxide, tungsten nitride, plasma wall interaction, laser heating, post-mortem analysis 2
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
Progress and perspectives on composite laser-pulses spectroscopy for high-accuracy optical clocks
Authors:
Thomas Zanon-Willette,
Remi Lefevre,
Rémi Metzdorff,
Nicolas Sillitoe,
Sylvain Almonacil,
Marco Minissale,
Emeric de Clercq,
Alexey V Taichevachev,
Vareriy I Yudin,
Ennio Arimondo
Abstract:
Probing an atomic resonance without disturbing it is an ubiquitous issue in physics. This problem is critical in high-accuracy spectroscopy or for the next generation of atomic optical clocks. Ultra-high resolution frequency metrology requires sophisticated interrogation schemes and robust protocols handling pulse length errors and residual frequency detuning offsets . This review reports recent p…
▽ More
Probing an atomic resonance without disturbing it is an ubiquitous issue in physics. This problem is critical in high-accuracy spectroscopy or for the next generation of atomic optical clocks. Ultra-high resolution frequency metrology requires sophisticated interrogation schemes and robust protocols handling pulse length errors and residual frequency detuning offsets . This review reports recent progress and perspective in such schemes, using sequences of composite laser-pulses tailored in pulse duration, frequency and phase, inspired by NMR techniques and quantum information processing. After a short presentation of Rabi technique and NMR-like composite pulses allowing efficient compensation of electromagnetic field perturbations to achieve robust population transfers, composite laser-pulses are investigated within Ramsey's method of separated oscillating fields in order to generate non-linear compensation of probe-induced frequency shifts. Laser-pulses protocols such as Hyper-Ramsey (HR), Modified Hyper-Ramsey (MHR), Generalized Hyper-Ramsey (GHR) and hybrid schemes are reviewed. These techniques provide excellent protection against both probe induced light-shift perturbations and laser intensity variations. More sophisticated schemes generating synthetic frequency-shifts are presented. They allow to reduce or completely eliminate imperfect correction of probe-induced frequency-shifts even in presence of decoherence due to the laser line-width. Finally, two universal protocols are presented which provide complete elimination of probe-induced frequency shifts in the general case where both decoherence and relaxation dissipation effects are present by using exact analytic expressions for phase-shifts and the clock frequency detuning. These techniques might be applied to atomic, molecular and nuclear frequency metrology, mass spectrometry as well as precision spectroscopy.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
First pressure shift measurement of ozone molecular lines at 9.54 $μ$m using a tunable quantum cascade laser
Authors:
Marco Minissale,
Thomas Zanon-Willette,
Pascal Jeseck,
Corinne Boursier,
Christof Janssen
Abstract:
Using a free-running distributed-feedback quantum cascade laser (QCL) emitting at 9.54 $μ$m, the pressure shift parameters of four intense rovibrational transitions in the $ν_3$ fundamental band of ozone induced by oxygen (O$_2$), air and the noble gases helium (He), argon (Ar), and xenon (Xe) are obtained by employing second harmonic detection. The experimental analysis comprises a full uncertain…
▽ More
Using a free-running distributed-feedback quantum cascade laser (QCL) emitting at 9.54 $μ$m, the pressure shift parameters of four intense rovibrational transitions in the $ν_3$ fundamental band of ozone induced by oxygen (O$_2$), air and the noble gases helium (He), argon (Ar), and xenon (Xe) are obtained by employing second harmonic detection. The experimental analysis comprises a full uncertainty budget and provides line shift data which are traceable to SI. The high density of transitions in the $ν_3$ spectral region of ozone make this region particularly difficult to study with more commonly used techniques such as Fourier transform spectroscopy. The comparatively high spectral resolution of the QCL in the MHz range, on the contrary, allows to measure molecular shifts at relatively low pressures (from 2 to 70 hPa), thus reducing the impact of spectral congestion due to pressure broadening of molecular lines. The comparison of our results with published data shows that presently recommended values for the pressure shift are too low in this region. This observation is corroborated by semi-classical calculations using the Robert-Bonamy formalism. A slight negative $J$ dependence, already observed in other ozone vibrational bands, is predicted. Systematic use of our technique could be very useful to support this hypothesis and to make up for the lack of shift parameters for ozone $ν_3$ transitions in molecular spectral databases. A subsequent stabilization of the QCL onto an optical frequency comb will open up possibilities to perform metrological measurements of Doppler-free molecular lines.
△ Less
Submitted 28 May, 2018;
originally announced May 2018.
-
Non-linear frequency-sweep correction of tunable electromagnetic sources
Authors:
M. Minissale,
T. Zanon-Willette,
I. Prokhorov,
H. Elandaloussi,
C. Janssen
Abstract:
Tunable electromagnetic sources, such as voltage controlled oscillators (VCO), micro electromechanical systems (MEMS) or diode lasers are often required to be linear during frequency-sweep modulation. In many cases, it might also be sufficient that the degree of the non-linearity can be well controlled. Without further efforts, these conditions are rarely achieved using free running sources. Based…
▽ More
Tunable electromagnetic sources, such as voltage controlled oscillators (VCO), micro electromechanical systems (MEMS) or diode lasers are often required to be linear during frequency-sweep modulation. In many cases, it might also be sufficient that the degree of the non-linearity can be well controlled. Without further efforts, these conditions are rarely achieved using free running sources. Based on a pre-distortion voltage ramp, we develop in this letter a simple and universal method that minimizes the non-linear frequency response of tunable electromagnetic sources. Using a current-driven Quantum Cascade Laser (QCL) as an example, we demonstrate that the non-linearity can easily be reduced by a factor of ten when using a single distortion parameter $γ$. In the investigation of the IR absorption spectrum of ozone at 10\,$μ$m, an even better reduction of the frequency scale error by two orders of magnitude is obtained by using the pre-distortion method to generate an essentially purely quadratic sweep frequency dependency which can be inverted easily to retrieve precise molecular line positions. After having tested our method on a variety of electromagnetic sources, we anticipate a wide range of applications in a variety of fields.
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
Deuteration of ammonia with D atoms on oxidized partly ASW covered graphite surface
Authors:
Henda Chaabouni,
Marco Minissale,
Saoud Baouche,
François Dulieu
Abstract:
The deuteration of ammonia by D atoms has been investigated experimentally in the sub-monolayer regime on realistic analogues of interstellar dust grain surfaces. About 0.8 monolayer of solid NH3 was deposited on top of an oxidized graphite surface held at 10 K, partly covered with ASW ice. Ammonia ice is subsequently exposed to D atoms for different exposure times using a differentially pumped be…
▽ More
The deuteration of ammonia by D atoms has been investigated experimentally in the sub-monolayer regime on realistic analogues of interstellar dust grain surfaces. About 0.8 monolayer of solid NH3 was deposited on top of an oxidized graphite surface held at 10 K, partly covered with ASW ice. Ammonia ice is subsequently exposed to D atoms for different exposure times using a differentially pumped beam-line. The deuteration experiments of ammonia were carried out by mass spectroscopy and temperature programmed desorption (TPD) technique. The experimental results showed the formation of three isotopologue ammonia species by direct exothermic H-D substitution surface reactions: NH3+D->NH2D+H, NH2D+D->NHD2+H, and NHD2+D->ND3+H. The formation of the deuterated isotopologues NH2D, NHD2, and ND3 at low surface temperature (10 K) is likely to occur through quantum tunneling process on the oxidized graphite surface. A kinetic model taking into account the diffusion of D atoms on the surface is developed to estimate the width and the hight of the activation energy barriers for the successive deuteration reactions of ammonia species by D atoms. Identical control experiments were performed using CH3OH and D atoms. The deuteration process of solid methanol is ruled by H abstraction and D addition mechanism, and is almost five orders of magnitude faster than ammonia deuteration process.
△ Less
Submitted 14 July, 2017; v1 submitted 13 July, 2017;
originally announced July 2017.
-
Direct measurement of desorption and diffusion energies of O and N atoms physisorbed on amorphous surfaces
Authors:
Marco Minissale,
Emanuele Congiu,
François Dulieu
Abstract:
Physisorbed atoms on the surface of interstellar dust grains play a central role in solid state astrochemistry. Their surface reactivity is one source of the observed molecular complexity in space. In experimental astrophysics, the high reactivity of atoms also constitutes an obstacle to measuring two of the fundamental properties in surface physics, namely desorption and diffusion energies, and s…
▽ More
Physisorbed atoms on the surface of interstellar dust grains play a central role in solid state astrochemistry. Their surface reactivity is one source of the observed molecular complexity in space. In experimental astrophysics, the high reactivity of atoms also constitutes an obstacle to measuring two of the fundamental properties in surface physics, namely desorption and diffusion energies, and so far direct measurements are non-existent for O and N atoms. We investigated the diffusion and desorption processes of O and N atoms on cold surfaces in order to give boundary conditions to astrochemical models. Here we propose a new technique for directly measuring the N- and O-atom mass signals. Including the experimental results in a simple model allows us to almost directly derive the desorption and diffusion barriers of N atoms on amorphous solid water ice (ASW) and O atoms on ASW and oxidized graphite. We find a strong constraint on the values of desorption and thermal diffusion energy barriers. The measured barriers for O atoms are consistent with recent independent estimations and prove to be much higher than previously believed (E$_{des}=1410_{-160}^{+290}$; E$_{dif}=990_{-360}^{+530}$ K on ASW). As for oxygen atoms, we propose that the combination E$_{des}$-E$_{dif}$=1320-750 K is a sensible choice among the possible pairs of solutions. Also, we managed to measure the desorption and diffusion energy of N atoms for the first time (E$_{des}=720_{-80}^{+160}$; E$_{dif}=525_{-200}^{+260}$ K on ASW) in the thermal hopping regime and propose that the combination E$_{des}$-E$_{dif}$=720-400 K can be reasonably adopted in models. The value of E$_{dif}$ for N atoms is slightly lower than previously suggested, which implies that the N chemistry on dust grains might be richer.
△ Less
Submitted 9 March, 2016;
originally announced March 2016.
-
Composite pulses in Hyper-Ramsey spectroscopy for the next generation of atomic clocks
Authors:
T. Zanon-Willette,
M. Minissale,
V. I. Yudin,
A. V. Taichenachev
Abstract:
The next generation of atomic frequency standards based on an ensemble of neutral atoms or a single-ion will provide very stringent tests in metrology, applied and fundamental physics requiring a new step in very precise control of external systematic corrections. In the proceedings of the 8th Symposium on Frequency Standards and Metrology, we present a generalization of the recent Hyper-Ramsey sp…
▽ More
The next generation of atomic frequency standards based on an ensemble of neutral atoms or a single-ion will provide very stringent tests in metrology, applied and fundamental physics requiring a new step in very precise control of external systematic corrections. In the proceedings of the 8th Symposium on Frequency Standards and Metrology, we present a generalization of the recent Hyper-Ramsey spectroscopy with separated oscillating fields using composites pulses in order to suppress field frequency shifts induced by the interrogation laser itself. Sequences of laser pulses including specific selection of phases, frequency detunings and durations are elaborated to generate spectroscopic signals with a strong reduction of the light-shift perturbation by off resonant states. New optical clocks based on weakly allowed or completely forbidden transitions in atoms, ions, molecules and nuclei will benefit from these generalized Ramsey schemes to reach relative accuracies well below the 10$^{-18}$ level.
△ Less
Submitted 2 March, 2016; v1 submitted 1 March, 2016;
originally announced March 2016.
-
Quantum tunneling of oxygen atoms on very cold surfaces
Authors:
M. Minissale,
E. Congiu,
S. Baouche,
H. Chaabouni,
A. Moudens,
F. Dulieu,
M. Accolla,
S. Cazaux,
G. Manico,
V. Pirronello
Abstract:
Any evolving system can change of state via thermal mechanisms (hopping a barrier) or via quantum tunneling. Most of the time, efficient classical mechanisms dominate at high temperatures. This is why an increase of the temperature can initiate the chemistry. We present here an experimental investigation of O-atom diffusion and reactivity on water ice. We explore the 6-25 K temperature range at su…
▽ More
Any evolving system can change of state via thermal mechanisms (hopping a barrier) or via quantum tunneling. Most of the time, efficient classical mechanisms dominate at high temperatures. This is why an increase of the temperature can initiate the chemistry. We present here an experimental investigation of O-atom diffusion and reactivity on water ice. We explore the 6-25 K temperature range at sub-monolayer surface coverages. We derive the diffusion temperature law and observe the transition from quantum to classical diffusion. Despite of the high mass of O, quantum tunneling is efficient even at 6 K. As a consequence, the solid-state astrochemistry of cold regions should be reconsidered and should include the possibility of forming larger organic molecules than previously expected.
△ Less
Submitted 13 February, 2014;
originally announced February 2014.
