-
Determination of Stokes vector from a single image acquisition
Authors:
Shuji Kamegaki,
Meguya Ryu,
Soon Hock Ng,
Vygantas Mizeikis,
Sean Blamires,
Saulius Juodkazis,
Junko Morikawa
Abstract:
Four Stokes parameters (1852) define the polarisation state of light. Measured changes of the Stokes vector of light traversing an inhomogeneous sample are linked to the local anisotropies of absorption and refraction and are harnessed over an increasing range of applications in photonics, material, and space/earth observation. Several independent polarisation sensitive measurements are usually re…
▽ More
Four Stokes parameters (1852) define the polarisation state of light. Measured changes of the Stokes vector of light traversing an inhomogeneous sample are linked to the local anisotropies of absorption and refraction and are harnessed over an increasing range of applications in photonics, material, and space/earth observation. Several independent polarisation sensitive measurements are usually required for determination of the all four Stokes parameters, which makes such characterisation procedure time-consuming or requires complex setups. Here we introduce a single-snapshot approach to Stokes polarimetry in transmission by use of a 4-polarisation camera with the on-chip integrated polarisers. A quarter-waveplate was added in front of the sample and was illuminated by a linearly polarised light. This approach is demonstrated by measuring birefringence $Δn\sim 0.012$ of spider silk of only $\sim 6~μ$m-diameter using microscopy, however, due to its generic nature, it is transferable to other spectral ranges and imaging applications, e.g., imaging from a fast moving satellite or drone or monitoring fast changing events such as phase transitions.
△ Less
Submitted 18 November, 2023;
originally announced November 2023.
-
All femtosecond optical pump and X-ray probe: holey-axicon for free electron laser
Authors:
V. Anand,
J. Maksimovic,
T. Katkus,
S. H. Ng,
O. Ulcinas,
M. Mikutis,
J. Baltrukonis,
A. Urbas,
G. Slekys,
H. Ogura,
D. Sagae,
T. Pikuz,
T. Somekawa,
N. Ozaki,
A. Vailionis,
G. Seniutinas,
V. Mizeikis,
K. Glazebrook,
J. P. Brodie,
P. R. Stoddart,
L. Rapp,
A. V. Rode,
E. G. Gamaly,
S. Juodkazis
Abstract:
We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for t…
▽ More
We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for the optical pump pulse. The fs-X-ray free electron laser (X-FEL) beam of sub-1 micrometer diameter can be introduced through the central hole along the optical axis onto a target as a probe. Different realisations of optical pump are discussed. Such optical elements facilitate alignment of ultra-short fs-pulses in space and time and can be used in light-matter interaction experiments at extreme energy densities on the surface and in the volume of targets. Full advantage of ultra-short 10 fs X-FEL probe pulses with fs-pump(optical) opens an unexplored temporal dimension of phase transitions and the fastest laser-induced rates of material heating and quenching. A wider field of applications of fs-laser-enabled structuring of materials and design of specific optical elements for astrophotonics is presented.
△ Less
Submitted 24 May, 2020;
originally announced May 2020.
-
Nanoscale optical and structural characterisation of silk
Authors:
Meguya Ryu,
Reo Honda,
Adrian Cernescu,
Arturas Vailionis,
Armandas Balcytis,
Jitraporn Vongsvivut,
Jing-Liang Li,
Denver P. Linklater,
Elena P. Ivanova,
Vygantas Mizeikis,
Mark J. Tobin,
Junko Morikawa,
Saulius Juodkazis
Abstract:
Background: Nanoscale composition of silk defining its unique properties via a hierarchical structural anisotropy has to be analysed at the highest spatial resolution of tens-of-nanometers corresponding to the size of fibrils made of b-sheets, which are the crystalline building blocks of silk. Results: Nanoscale optical and structural properties of silk have been measured from 100-nm thick longitu…
▽ More
Background: Nanoscale composition of silk defining its unique properties via a hierarchical structural anisotropy has to be analysed at the highest spatial resolution of tens-of-nanometers corresponding to the size of fibrils made of b-sheets, which are the crystalline building blocks of silk. Results: Nanoscale optical and structural properties of silk have been measured from 100-nm thick longitudinal slices of silk fibers with ~10 nm resolution, the highest so far. Optical sub-wavelength resolution in hyperspectral mapping of absorbance and molecular orientation were carried out for comparison at IR wavelengths 2-10 micrometers using synchrotron radiation. Conclusion: Reliable distinction of transmission changes by only 1-2% due to anisotropy of amide bands was obtained from nano-thin slices of silk.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
Simple multi-wavelength imaging of birefringence: case study of silk
Authors:
Reo Honda,
Meguya Ryu,
Jing-Liang Li,
Vygantas Mizeikis,
Saulius Juodkazis,
Junko Morikawa
Abstract:
A polarised light imaging microscopy with an addition of liquid crystal (LC) phase retarder was implemented to determine the birefringence of silk fibers with the high 2 micrometers spatial resolution. The measurement was carried out with silk fiber (the optical slow axis) and the slow axis of the LC retarder set parallel (a perpendicular alignment can also be used). The direct fit of the transmis…
▽ More
A polarised light imaging microscopy with an addition of liquid crystal (LC) phase retarder was implemented to determine the birefringence of silk fibers with the high 2 micrometers spatial resolution. The measurement was carried out with silk fiber (the optical slow axis) and the slow axis of the LC retarder set parallel (a perpendicular alignment can also be used). The direct fit of the transmission data provides a high fidelity determination of birefringence, $Dn = 1.63\times 10^{-2}$ (with 2% uncertainty) of the brown silk fiber (Antheraea pernyi) averaged over the wavelength range $l =$ (425-625) nm. By measuring retardance at four wavelengths it was possible to determine the true value of the birefringence of a thick sample when an optical path may include large number of wavelengths ($2p$ cycles in phase). The numerical procedures and required hardware are described for the do-it-yourself assembly of the imaging polariscope at a fractional budget compared with commercial units.
△ Less
Submitted 15 September, 2018;
originally announced September 2018.
-
Nanoscale chemical mapping of laser-solubilized silk
Authors:
Meguya Ryu,
Hanae Kobayashi,
Armandas Balcytis,
Xuewen Wang,
Jitraporn Vongsvivut,
Jingliang Li,
Norio Urayama,
Vygantas Mizeikis,
Mark Tobin,
Saulius Juodkazis,
Junko Morikawa
Abstract:
A water soluble amorphous form of silk was made by ultra-short laser pulse irradiation and detected by nanoscale IR mapping. An optical absorption-induced nanoscale surface expansion was probed to yield the spectral response of silk at IR molecular fingerprinting wavelengths with a high ~20 nm spatial resolution defined by the tip of the probe. Silk microtomed sections of 1-5 micrometers in thickn…
▽ More
A water soluble amorphous form of silk was made by ultra-short laser pulse irradiation and detected by nanoscale IR mapping. An optical absorption-induced nanoscale surface expansion was probed to yield the spectral response of silk at IR molecular fingerprinting wavelengths with a high ~20 nm spatial resolution defined by the tip of the probe. Silk microtomed sections of 1-5 micrometers in thickness were prepared for nanoscale spectroscopy and a laser was used to induce amorphisation. Comparison of silk absorbance measurements carried out by table-top and synchrotron Fourier transform IR spectroscopy proved that chemical imaging obtained at high spatial resolution and specificity (able to discriminate between amorphous and crystalline silk) is reliably achieved by nanoscale IR. A nanoscale material characterization using synchrotron IR radiation is discussed.
△ Less
Submitted 25 August, 2017;
originally announced September 2017.
-
3D laser printing by ultra-short laser pulses for micro-optical applications: towards telecom wavelengths
Authors:
Meguya Ryu,
Vygantas Mizeikis,
Junko Morikawa,
Hernando Magallanes,
Etienne Brasselet,
Simonas Varapnickas,
Mangirdas Malinauskas,
Saulius Juodkazis
Abstract:
Three dimensional (3D) fast (< 0.5 hour) printing of micro-optical elements down to sub-wavelength resolution over 100 micrometers footprint areas using femtosecond (fs-)laser oscillator is presented. Using sub-1 nJ pulse energies, optical vortex generators made of polymerised grating segments with an azimuthally changing orientation have been fabricated in SZ2080 resist; width of polymerised rods…
▽ More
Three dimensional (3D) fast (< 0.5 hour) printing of micro-optical elements down to sub-wavelength resolution over 100 micrometers footprint areas using femtosecond (fs-)laser oscillator is presented. Using sub-1 nJ pulse energies, optical vortex generators made of polymerised grating segments with an azimuthally changing orientation have been fabricated in SZ2080 resist; width of polymerised rods was ~150 nm and period 0.6-1 micrometers. Detailed phase retardance analysis was carried out manually with Berek compensator (under a white light illumination) and using an equivalent principle by an automated Abrio implementation at 546 nm. Direct experimental measurements of retardance was required since the period of the grating was comparable (or larger) than the wavelength of visible light. By gold sputtering, transmission-type optical vortex generators were turned into reflective ones with augmented retardance, n.h defined by the form birefringence, n, and the height h = 2d where d is the thickness of the polymerised structure. Retardance reached 315 nm as measured with Berek compensator at visible wavelengths. Birefringent phase delays of 180 degrees (or half-wavelength) required for high purity vortex generators can be made based on the proposed approach. Optical vortex generators for telecom wavelengths with sub-wavelength patterns of azimuthally oriented gratings are amenable by direct laser polymerisation.
△ Less
Submitted 28 July, 2017;
originally announced July 2017.
-
Nanoscale precision of 3D polymerisation via polarisation control
Authors:
Sima Rekstyte,
Tomas Jonavicius,
Darius Gailevicius,
Mangirdas Malinauskas,
Vygantas Mizeikis,
Eugene G. Gamaly,
Saulius Juodkazis
Abstract:
A systematic analysis of polarization effects in a direct write femtosecond laser 3D lithography is presented. It is newly shown that coupling between linear polarization of the writing light electric field and temperature gradient can be used to fine-tune feature sizes in structuring of photoresists at a nanoscale. The vectorial Debye focusing is used to simulate polarization effects and a contro…
▽ More
A systematic analysis of polarization effects in a direct write femtosecond laser 3D lithography is presented. It is newly shown that coupling between linear polarization of the writing light electric field and temperature gradient can be used to fine-tune feature sizes in structuring of photoresists at a nanoscale. The vectorial Debye focusing is used to simulate polarization effects and a controlled variation up to 20% in the linewidth is shown experimentally for the identical axial extent of the polymerised features. The revealed mechanisms are relevant for a wide range of phenomena of light-matter interaction at tight focusing in laser-tweezers and in plasmonic or dielectric sub-wavelength focusing where strong light intensity and thermal gradients coexist.
△ Less
Submitted 22 March, 2016;
originally announced March 2016.
-
Microfabrication of Three-Dimensional Structures in Polymer and Glass by Femtosecond Pulses
Authors:
Saulius Juodkazis,
Toshiaki Kondo,
Vygantas Mizeikis,
Shigeki Matsuo,
Hiroaki Misawa,
Egidijus Vanagas,
Igor Kudryashov
Abstract:
We report three-dimensional laser microfabrication, which enables microstructuring of materials on the scale of 0.2-1 micrometers. The two different types of microfabrication demonstrated and discussed in this work are based on holographic recording, and light-induced damage in transparent dielectric materials. Both techniques use nonlinear optical excitation of materials by ultrashort laser pul…
▽ More
We report three-dimensional laser microfabrication, which enables microstructuring of materials on the scale of 0.2-1 micrometers. The two different types of microfabrication demonstrated and discussed in this work are based on holographic recording, and light-induced damage in transparent dielectric materials. Both techniques use nonlinear optical excitation of materials by ultrashort laser pulses (duration < 1 ps).
△ Less
Submitted 9 May, 2002;
originally announced May 2002.
