Showing 1–50 of 121 results for author: Moss, J

Designing and analyzing microwave photonic spectral domain filters based on transversal filtering with optical microcombs

Authors: David J. Moss

Abstract: Microwave transversal filters, which are implemented based on the transversal filter structure in digital signal processing, offer a high reconfigurability for achieving a variety of signal processing functions without changing hardware. When implemented using microwave photonic (MWP) technologies, also known as MWP transversal filters, they provide competitive advantages over their electrical cou… ▽ More Microwave transversal filters, which are implemented based on the transversal filter structure in digital signal processing, offer a high reconfigurability for achieving a variety of signal processing functions without changing hardware. When implemented using microwave photonic (MWP) technologies, also known as MWP transversal filters, they provide competitive advantages over their electrical counterparts, such as low loss, large operation bandwidth, and strong immunity to electromagnetic interference. Recent advances in high performance optical microcombs provide compact and powerful multiwavelength sources for MWP transversal filters that require a larger number of wavelength channels to achieve high performance, allowing for the demonstration of a diverse range of filter functions with improved performance and new features. Here, we present a comprehensive performance analysis for microcomb based MWP spectral filters based on the transversal filter approach. First, we investigate the theoretical limitations in the filter spectral response induced by finite tap numbers. Next, we analyze the distortions in the filter spectral response resulting from experimental error sources. Finally, we assess the influence of input signals bandwidth on the filtering errors. These results provide a valuable guide for the design and optimization of microcomb-based MWP transversal filters for a variety of applications. △ Less

Submitted 7 August, 2024; originally announced August 2024.

Comments: 33 pages, 10 figures, 33 references

Journal ref: Advanced Physics Research Vol. 3 (2024)

Integrated nanophotonic polarizers in silicon waveguides and ring resonators using graphene oxide 2D films

Authors: David J. Moss

Abstract: We experimentally demonstrate waveguide and microring resonator (MRR) polarizers by integrating 2D graphene oxide (GO) films onto silicon (Si) photonic devices. The 2D GO films with highly anisotropic light absorption are on-chip integrated with precise control over their thicknesses and sizes. Detailed measurements are performed for the fabricated devices with different GO film thicknesses, coati… ▽ More We experimentally demonstrate waveguide and microring resonator (MRR) polarizers by integrating 2D graphene oxide (GO) films onto silicon (Si) photonic devices. The 2D GO films with highly anisotropic light absorption are on-chip integrated with precise control over their thicknesses and sizes. Detailed measurements are performed for the fabricated devices with different GO film thicknesses, coating lengths, and Si waveguide widths. The results show that a maximum polarization-dependent loss (PDL) of ~17 dBでしべる is achieved for the hybrid waveguides, and the hybrid MRRs achieved a maximum polarization extinction ratio (PER) of ~10 dBでしべる. We also characterize the wavelength- and power-dependent response for these polarizers. The former demonstrates a broad operation bandwidth of over ~100 nm, and the latter verifies performance improvement enabled by photo-thermal changes in GO films. By fitting the experimental results with theoretical simulations, we find that the anisotropy in the loss of GO films dominates the polarization selectivity of these devices. These results highlight the strong potential of 2D GO films for realizing high-performance polarization selective devices in Si photonic platform. △ Less

Submitted 20 July, 2024; originally announced August 2024.

Comments: 28 pages, 6 figures, 174 references

Journal ref: Applied Physics Letters Volume 125 (2024)

Photonic integrated circuit polarizers based on 2D materials

Authors: David J. Moss

Abstract: Optical polarizers are essential components for the selection and manipulation of light polarization states in optical systems. Over the past decade, the rapid advancement of photonic technologies and devices has led to the development of a range of novel optical polarizers, opening avenues for many breakthroughs and expanding applications across diverse fields. Particularly, two dimensional (2D)… ▽ More Optical polarizers are essential components for the selection and manipulation of light polarization states in optical systems. Over the past decade, the rapid advancement of photonic technologies and devices has led to the development of a range of novel optical polarizers, opening avenues for many breakthroughs and expanding applications across diverse fields. Particularly, two dimensional (2D) materials, known for their atomic thin film structures and unique optical properties, have become attractive for implementing optical polarizers with high performance and new features that were not achievable before. This paper reviews recent progress in 2D material based optical polarizers. First, an overview of key properties of various 2D materials for realizing optical polarizers is provided. Next, the state of the art optical polarizers based on 2D materials, which are categorized into spatial light devices, fiber devices, and integrated waveguide devices, are reviewed and compared. Finally, we discuss the current challenges of this field as well as the exciting opportunities for future technological advances. △ Less

Submitted 9 July, 2024; originally announced July 2024.

Comments: 45 pages, 7 figures, 277 references

Journal ref: npj Nanophotonics (2024)

Graphene oxide two dimensional films for thermo-optic photonic integrated devices

Authors: David J. Moss

Abstract: Efficient heat management and control in optical devices, facilitated by advanced thermo-optic materials, is critical for many applications such as photovoltaics, thermal emitters, mode-locked lasers, and optical switches. Here, we investigate the thermo-optic properties of 2D graphene oxide (GO) films by precisely integrating them onto microring resonators (MRRs) with control over the film thickn… ▽ More Efficient heat management and control in optical devices, facilitated by advanced thermo-optic materials, is critical for many applications such as photovoltaics, thermal emitters, mode-locked lasers, and optical switches. Here, we investigate the thermo-optic properties of 2D graphene oxide (GO) films by precisely integrating them onto microring resonators (MRRs) with control over the film thicknesses and lengths. We characterize the refractive index, extinction coefficient, thermo-optic coefficient, and thermal conductivity of for the GO films with different layer numbers and degrees of reduction, including reversible reduction and enhanced optical bistability induced by photo-thermal effects. Experimental results show that the thermo-optic properties of 2D GO films vary widely with the degree of reduction, with significant polarization anisotropy, enabling efficient polarization sensitive devices. The versatile thermo-optic response of 2D GO substantially expands the scope of functionalities and devices that can be engineered, making it promising for a diverse range of thermo-optic applications. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Comments: 41 pages, 8 figures, 169 references

Journal ref: Advanced Functional Materials Volume 34 (2024)

Large and layer dependent nonlinear optical absorption of MXene 2D thin films

Authors: David J. Moss

Abstract: As a rapidly expanding family of two dimensional (2D) materials, MXenes have recently gained considerable attention due to their appealing properties. Here, by developing a solution based coating method that enables transfer free and layer by layer film coating, we investigate the layer dependent nonlinear optical absorption of Ti3C2Tx films, an important member of the MXene family. By using the Z… ▽ More As a rapidly expanding family of two dimensional (2D) materials, MXenes have recently gained considerable attention due to their appealing properties. Here, by developing a solution based coating method that enables transfer free and layer by layer film coating, we investigate the layer dependent nonlinear optical absorption of Ti3C2Tx films, an important member of the MXene family. By using the Zscan technique, we characterize the nonlinear absorption of the prepared MXene films consisting of different numbers of monolayers. The results show that there is a strong and layer dependent nonlinear absorption behavior, transitioning from revisable saturable absorption (RSA) to saturable absorption (SA) as the layer number increases from 5 to 30. Notably, the nonlinear absorption coefficient beta varies significantly within this range, changing from 7.13 x 100 cm/GW to -2.69 100 cm/GW. We also characterize the power dependent nonlinear absorption of the MXene films at various incident laser intensities, and a decreasing trend in beta is observed for increasing laser intensity. These results reveal the intriguing layer dependent nonlinear optical properties of 2D MXene films, highlighting their versatility and potential for implementing high-performance nonlinear photonic devices. △ Less

Submitted 16 June, 2024; originally announced June 2024.

Comments: 27 pages, 6 figures, 149 references

Journal ref: Small Science vol 4 article 2400179 (2024)

Novel functions in silicon photonic chips incorporated with graphene oxide thin films

Authors: David J. Moss

Abstract: On-chip integration of two-dimensional (2D) materials with unique structures and distinctive properties endow integrated devices with new functionalities and improved performance. With a high flexibility in modifying its properties and a strong compatibility with various integrated platforms, graphene oxide (GO) becomes an attractive 2D material for implementing functional hybrid integrated device… ▽ More On-chip integration of two-dimensional (2D) materials with unique structures and distinctive properties endow integrated devices with new functionalities and improved performance. With a high flexibility in modifying its properties and a strong compatibility with various integrated platforms, graphene oxide (GO) becomes an attractive 2D material for implementing functional hybrid integrated devices. Here, we demonstrate novel functionalities that go beyond the capabilities of conventional photonic integrated circuits, by harnessing the photo-thermal effects in 2D GO films integrated onto them. These include all-optical control and switching, optical power limiting, and non-reciprocal light transmission. The 2D layered GO films are on-chip integrated with precise control of their thicknesses and sizes. Benefitting from the broadband response of 2D GO films, all the three functionalities feature a very wide operational bandwidth. By fitting the experimental results with theory, we also extract the changes in material properties induced by the photo-thermal effects, which reveal interesting insights about 2D GO films. These results highlight the versatility of 2D GO films in implementing functional integrated photonic devices for a range of applications. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: 34 pages, 6 figures, 162 references

Journal ref: Advanced Materials Volume 36 (2024)

The performance of microwave photonic signal processors based on microcombs with different input signal waveforms

Authors: David J. Moss

Abstract: Microwave photonic (MWP) signal processors, which process microwave signals based on pho-tonic technologies, bring advantages intrinsic to photonics such as low loss, large processing bandwidth, and strong immunity to electromagnetic interference. Optical microcombs can offer a large number of wavelength channels and compact device footprints, which make them powerful multi-wavelength sources for… ▽ More Microwave photonic (MWP) signal processors, which process microwave signals based on pho-tonic technologies, bring advantages intrinsic to photonics such as low loss, large processing bandwidth, and strong immunity to electromagnetic interference. Optical microcombs can offer a large number of wavelength channels and compact device footprints, which make them powerful multi-wavelength sources for MWP signal processors to realize a variety of processing functions. In this paper, we experimentally demonstrate the capability of microcomb-based MWP signal processors to handle diverse input signal waveforms. In addition, we quantify the processing accuracy for different input signal waveforms, including Gaussian, triangle, parabolic, super Gaussian, and nearly square waveforms. Finally, we analyze the factors contributing to the dif-ference in the processing accuracy among the different input waveforms, and our theoretical analysis well elucidates the experimental results. These results provide a guidance for micro-comb-based MWP signal processors when processing microwave signals of various waveforms. △ Less

Submitted 10 February, 2024; originally announced March 2024.

Comments: 14 pages, 5 figures, 152 references. arXiv admin note: substantial text overlap with arXiv:2403.03438

Journal ref: MDPI Photonics Volume 10, 10111283 (2023)

Dual-polarization RF Channelizer Based on Kerr Soliton Microcomb Sources

Authors: Xingyuan Xu, David J. Moss

Abstract: We report a dual-polarization radio frequency (RF) channelizer based on microcombs. With the tailored mismatch between the FSRs of the active and passive MRRs, wideband RF spectra can be channelized into multiple segments featuring digital compatible bandwidths via the Vernier effect. Due to the use of dual polarization states, the number of channelized spectral segments, and thus the RF instantan… ▽ More We report a dual-polarization radio frequency (RF) channelizer based on microcombs. With the tailored mismatch between the FSRs of the active and passive MRRs, wideband RF spectra can be channelized into multiple segments featuring digital compatible bandwidths via the Vernier effect. Due to the use of dual polarization states, the number of channelized spectral segments, and thus the RF instantaneous bandwidth (with a certain spectral resolution), can be doubled. In our experiments, we used 20 microcomb lines with 49 GHz FSR to achieve 20 channels for each polarization, with high RF spectra slicing resolutions at 144 MHz (TE) and 163 MHz (TM), respectively; achieving an instantaneous RF operation bandwidth of 3.1 GHz (TE) and 2.2 GHz (TM). Our approach paves the path towards monolithically integrated photonic RF receivers (the key components active and passive MRRs are all fabricated on the same platform) with reduced complexity, size, and unprecedented performance, which is important for wide RF applications with digital compatible signal detection. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 7 pages 4 figures, 82 references

Journal ref: Optics Express Volume 32, No. 7, page 11281 (2024)

Microwave photonic transversal filters based on microcombs with feedback control

Authors: David J. Moss

Abstract: Feedback control plays a crucial role in improving system accuracy and stability for a variety of scientific and engineering applications. Here, we theoretically and experimentally investigate the implementation of feedback control in microwave photonic (MWP) transversal filter systems based on optical microcomb sources, which offer advantages in achieving highly reconfigurable processing function… ▽ More Feedback control plays a crucial role in improving system accuracy and stability for a variety of scientific and engineering applications. Here, we theoretically and experimentally investigate the implementation of feedback control in microwave photonic (MWP) transversal filter systems based on optical microcomb sources, which offer advantages in achieving highly reconfigurable processing functions without requiring changes to hardware. We propose four different feedback control methods including (1) one stage spectral power reshaping, (2) one stage impulse response reshaping, (3) two stage spectral power reshaping, and (4) two stage synergic spectral power reshaping and impulse response reshaping. We experimentally implement these feedback control methods and compare their performance. The results show that the feedback control can significantly improve not only the accuracy of comb line shaping as well as temporal signal processing and spectral filtering, but also the systems long term stability. Finally, we discuss the current limitations and future prospects for optimizing feedback control in microcomb based MWP transversal filter systems implemented by both discrete components and integrated chips. Our results provide a comprehensive guide for the implementation of feedback control in microcomb based MWP filter systems in order to improve their performance for practical applications. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 20 pages, 13 figures, 223 references

Journal ref: IEEE Journal of Selected Toptics in Quantum Electronics (JSTQE) Volume 30 (2024). Early Access

Third-order nonlinear optical response of 2D materials in the telecom band

Authors: David J. Moss

Abstract: All-optical signal processing based on nonlinear optical devices is promising for ultrafast information processing in optical communication systems. Recent advances in two-dimensional (2D) layered materials with unique structures and distinctive properties have opened up new ave-nues for nonlinear optics and the fabrication of related devices with high performance. This paper reviews the recent ad… ▽ More All-optical signal processing based on nonlinear optical devices is promising for ultrafast information processing in optical communication systems. Recent advances in two-dimensional (2D) layered materials with unique structures and distinctive properties have opened up new ave-nues for nonlinear optics and the fabrication of related devices with high performance. This paper reviews the recent advances in research on third-order optical nonlinearities of 2D materials, focus-ing on all-optical processing applications in the optical telecommunications band near 1550 nm. First, we provide an overview of the material properties of different 2D materials. Next, we review different methods for characterizing the third-order optical nonlinearities of 2D materials, including the Z-scan technique, third-harmonic generation (THG) measurement, and hybrid device character-ization, together with a summary of the measured n2 values in the telecommunications band. Fi-nally, the current challenges and future perspectives are discussed. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 28 pages, 9 figures, 228 references, 1 table

Journal ref: Micromachines volume 14 page 307 (2023)

Rabi resonance splitting phenomena in photonic integrated circuits

Authors: David J. Moss

Abstract: Realizing optical analogues of quantum phenomena in atomic, molecular, or condensed matter physics has underpinned a range of photonic technologies. Rabi splitting is a quantum phenomenon induced by a strong interaction between two quantum states, and its optical analogues are of fundamental importance for the manipulation of light-matter interactions with wide applications in optoelectronics and… ▽ More Realizing optical analogues of quantum phenomena in atomic, molecular, or condensed matter physics has underpinned a range of photonic technologies. Rabi splitting is a quantum phenomenon induced by a strong interaction between two quantum states, and its optical analogues are of fundamental importance for the manipulation of light-matter interactions with wide applications in optoelectronics and nonlinear optics. Here, we propose and theoretically investigate purely optical analogues of Rabi splitting in integrated waveguide-coupled resonators formed by two Sagnac interferometers. By tailoring the coherent mode interference, the spectral response of the devices is engineered to achieve optical analogues of Rabi splitting with anti-crossing behavior in the resonances. Transitions between the Lorentzian, Fano, and Rabi splitting spectral lineshapes are achieved by simply changing the phase shift along the waveguide connecting the two Sagnac interferometers, revealing interesting physical insights about the evolution of different optical analogues of quantum phenomena. The impact of the device structural parameters is also analyzed to facilitate device design and optimization. These results suggest a new way for realizing optical analogues of Rabi splitting based on integrated waveguide-coupled resonators, paving the way for many potential applications that manipulate light-matter interactions in the strong coupling regime. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 28 pages, 8 figures, 184 references

Journal ref: Advanced Physics Research Volume 2 article 2200123 (2023)

Photonic RF Channelization Based on Microcombs

Authors: Weiwei Han, Zhihui Liu, Mengxi Tan, Chaoran Huang, Jiayang Wu, Kun Xu, David J. Moss, Xingyuan Xu

Abstract: In recent decades, microwave photonic channelization techniques have developed significantly. Characterized by low loss, high versatility, large instantaneous bandwidth, and immunity to electromagnetic interference, microwave photonic channelization addresses the requirements of modern radar and electronic warfare for receivers. Microresonator-based optical frequency combs are promising devices fo… ▽ More In recent decades, microwave photonic channelization techniques have developed significantly. Characterized by low loss, high versatility, large instantaneous bandwidth, and immunity to electromagnetic interference, microwave photonic channelization addresses the requirements of modern radar and electronic warfare for receivers. Microresonator-based optical frequency combs are promising devices for photonic channelized receivers, enabling full advantage of multicarriers, large bandwidths, and accelerating the integration process of microwave photonic channelized receivers. In this paper, we review the research progress and trends in microwave photonic channelization, focusing on schemes that utilize integrated microcombs. We discuss the potential of microcomb-based RF channelization, as well as their challenges and limitations, and provide perspectives for their future development in the context of on-chip silicon-based photonics. △ Less

Submitted 17 January, 2024; originally announced January 2024.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Waveguide optical parametric amplifiers in silicon nitride with 2D graphene oxide films

Authors: Yang Qu, Jiayang Wu, Yuning Zhang, Yunyi Yang, Linnan Jia, Houssein El Dirani, Sébastien Kerdiles, Corrado Sciancalepore, Pierre Demongodin, Christian Grillet, Christelle Monat, Baohua Jia, David J. Moss

Abstract: Optical parametric amplification (OPA) represents a powerful solution to achieve broadband amplification in wavelength ranges beyond the scope of conventional gain media, for generating high-power optical pulses, optical microcombs, entangled photon pairs and a wide range of other applications. Here, we demonstrate optical parametric amplifiers based on silicon nitride (Si3N4) waveguides integrate… ▽ More Optical parametric amplification (OPA) represents a powerful solution to achieve broadband amplification in wavelength ranges beyond the scope of conventional gain media, for generating high-power optical pulses, optical microcombs, entangled photon pairs and a wide range of other applications. Here, we demonstrate optical parametric amplifiers based on silicon nitride (Si3N4) waveguides integrated with two-dimensional (2D) layered graphene oxide (GO) films. We achieve precise control over the thickness, length, and position of the GO films using a transfer-free, layer-by-layer coating method combined with accurate window opening in the chip cladding using photolithography. Detailed OPA measurements with a pulsed pump for the fabricated devices with different GO film thicknesses and lengths show a maximum parametric gain of ~24.0 dBでしべる, representing a ~12.2 dBでしべる improvement relative to the device without GO. We perform a theoretical analysis of the device performance, achieving good agreement with experiment and showing that there is substantial room for further improvement. This work represents the first demonstration of integrating 2D materials on chips to enhance the OPA performance, providing a new way of achieving high performance photonic integrated OPA by incorporating 2D materials. △ Less

Submitted 13 January, 2024; originally announced January 2024.

Comments: 38 pages, 8 figures, 80 references

Journal ref: Light Advanced Manufacturing volume 4, p39 (2023)

Photonic real time video image signal processor at 17Tb/s based on a Kerr microcomb

Authors: Mengxi Tan, Xingyuan Xu, Andreas Boes, Bill Corcoran, Thach G. Nguyen, Sai T. Chu, Brent E. Little, Roberto Morandotti, Jiayang Wu, Arnan Mitchell, David J. Moss

Abstract: Signal processing has become central to many fields, from coherent optical telecommunications, where it is used to compensate signal impairments, to video image processing. Image processing is particularly important for observational astronomy, medical diagnosis, autonomous driving, big data and artificial intelligence. For these applications, signal processing traditionally has mainly been perfor… ▽ More Signal processing has become central to many fields, from coherent optical telecommunications, where it is used to compensate signal impairments, to video image processing. Image processing is particularly important for observational astronomy, medical diagnosis, autonomous driving, big data and artificial intelligence. For these applications, signal processing traditionally has mainly been performed electronically. However these, as well as new applications, particularly those involving real time video image processing, are creating unprecedented demand for ultrahigh performance, including high bandwidth and reduced energy consumption. Here, we demonstrate a photonic signal processor operating at 17 Terabits/s and use it to process video image signals in real-time. The system processes 400,000 video signals concurrently, performing 34 functions simultaneously that are key to object edge detection, edge enhancement and motion blur. As compared with spatial-light devices used for image processing, our system is not only ultra-high speed but highly reconfigurable and programable, able to perform many different functions without any change to the physical hardware. Our approach is based on an integrated Kerr soliton crystal microcomb, and opens up new avenues for ultrafast robotic vision and machine learning. △ Less

Submitted 13 January, 2024; originally announced January 2024.

Comments: 20 pages, 5 figures, 71 references

Journal ref: Nature Communications Engineering Volume 2 page 94 (2023)

Maximizing the performance for microcomb based microwave photonic transversal signal processors

Authors: Yang Sun, Jiayang Wu, Yang Li, Xingyuan Xu, Guanghui Ren, Mengxi Tan, Sai Tak Chu, Brent E. Little, Roberto Morandotti, Arnan Mitchell, David J. Moss

Abstract: Microwave photonic (MWP) transversal signal processors offer a compelling solution for realizing versatile high-speed information processing by combining the advantages of reconfigurable electrical digital signal processing and high-bandwidth photonic processing. With the capability of generating a number of discrete wavelengths from micro-scale resonators, optical microcombs are powerful multi-wa… ▽ More Microwave photonic (MWP) transversal signal processors offer a compelling solution for realizing versatile high-speed information processing by combining the advantages of reconfigurable electrical digital signal processing and high-bandwidth photonic processing. With the capability of generating a number of discrete wavelengths from micro-scale resonators, optical microcombs are powerful multi-wavelength sources for implementing MWP transversal signal processors with significantly reduced size, power consumption, and complexity. By using microcomb-based MWP transversal signal processors, a diverse range of signal processing functions have been demonstrated recently. In this paper, we provide a detailed analysis for the processing inaccuracy that is induced by the imperfect response of experimental components. First, we investigate the errors arising from different sources including imperfections in the microcombs, the chirp of electro-optic modulators, chromatic dispersion of the dispersive module, shaping errors of the optical spectral shapers, and noise of the photodetector. Next, we provide a global picture quantifying the impact of different error sources on the overall system performance. Finally, we introduce feedback control to compensate the errors caused by experimental imperfections and achieve significantly improved accuracy. These results provide a guide for optimizing the accuracy of microcomb-based MWP transversal signal processors. △ Less

Submitted 10 September, 2023; originally announced September 2023.

Comments: 15 pages, 12 figures, 60 references

Journal ref: Journal of Lightwave Technology Volume 41, (2023)

Observation of Brillouin scattering in a high-index doped silica chip waveguide

Authors: M. Zerbib, V. T. Hoang, J. C. Beugnot, K. P. Huy, B. Little, S. T. Chu, D. J. Moss, R. Morandotti, B. Wetzel, T. Sylvestre

Abstract: We report the observation of Brillouin backscattering in a 50-cm long spiral high-index doped silica chip waveguide and measured a Brillouin frequency shift of 16 GHz which is in very good agreement with theoretical predictions and numerical simulations based on the elastodynamics equation. We report the observation of Brillouin backscattering in a 50-cm long spiral high-index doped silica chip waveguide and measured a Brillouin frequency shift of 16 GHz which is in very good agreement with theoretical predictions and numerical simulations based on the elastodynamics equation. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Comments: 5 pages, 6 figures

Theory for the Accuracy of Microcomb Photonic Microwave Transversal Signal Processors

Authors: David J. Moss

Abstract: Photonic RF transversal signal processors, which are equivalent to reconfigurable electrical digital signal processors but implemented with photonic technologies, have been widely used for modern high-speed information processing. With the capability of generating large numbers of wavelength channels with compact micro-resonators, optical microcombs bring new opportunities for realizing photonic R… ▽ More Photonic RF transversal signal processors, which are equivalent to reconfigurable electrical digital signal processors but implemented with photonic technologies, have been widely used for modern high-speed information processing. With the capability of generating large numbers of wavelength channels with compact micro-resonators, optical microcombs bring new opportunities for realizing photonic RF transversal signal processors that have greatly reduced size, power consumption, and complexity. Recently, a variety of signal processing functions have been demonstrated using microcomb-based photonic RF transversal signal processors. Here, we provide detailed analysis for quantifying the processing accuracy of microcomb-based photonic RF transversal signal processors. First, we investigate the theoretical limitations of the processing accuracy determined by tap number, signal bandwidth, and pulse waveform. Next, we discuss the practical error sources from different components of the signal processors. Finally, we analyze the contributions of the theoretical limitations and the experimental factors to the overall processing inaccuracy both theoretically and experimentally. These results provide a useful guide for designing microcomb-based photonic RF transversal signal processors to optimize their accuracy. △ Less

Submitted 8 April, 2023; originally announced April 2023.

Comments: 17 pages, 12 figures, 103 references

Journal ref: IEEE Journal of Selected Topics in Quantum Electronics (JSTQE) Volume 29 (2023)

Sagnac interference in integrated photonics for reflection mirrors, gyroscopes, filters, and wavelength interleavers

Authors: David J. Moss

Abstract: As a fundamental optical approach to interferometry, Sagnac interference has been widely used for reflection manipulation, precision measurements, and spectral engineering in optical systems. Compared to other interferometry configurations, it offers attractive advantages by yielding a reduced system complexity without the need for phase control between different pathways, thus offering a high deg… ▽ More As a fundamental optical approach to interferometry, Sagnac interference has been widely used for reflection manipulation, precision measurements, and spectral engineering in optical systems. Compared to other interferometry configurations, it offers attractive advantages by yielding a reduced system complexity without the need for phase control between different pathways, thus offering a high degree of stability against external disturbance and a low wavelength dependence. The advance of integration fabrication techniques has enabled chip-scale Sagnac interferometers with greatly reduced footprint and improved scalability compared to more conventional approaches implemented by spatial light or optical fiber devices. This facilitates a variety of integrated photonic devices with bidirectional light propagation, showing new features and capabilities compared to unidirectional-light-propagation devices such as Mach-Zehnder interferometers (MZIs) and ring resonators (RRs). Here, we present our latest results for functional integrated photonic devices based on Sagnac interference. We outline the theory of integrated Sagnac interference devices with comparisons to other integrated photonic building blocks such as MZIs, RRs, photonic crystal cavities, and Bragg gratings. We present our latest results for Sagnac interference devices realized in integrated photonic chips, including reflection mirrors, optical gyroscopes, basic filters, wavelength (de)interleavers, and optical analogues of quantum physics. △ Less

Submitted 25 February, 2023; originally announced February 2023.

Comments: 77 pages, 18 figures, 489 references

Journal ref: Applied Physics Reviews Volume 10, Article 011309 (2023)

Review: Graphene oxide 2D thin films for high performance nonlinear integrated photonics

Authors: David J. Moss

Abstract: Integrated photonic devices operating via optical nonlinearities offer a powerful solution for all optical information processing, yielding processing speeds that are well beyond that of electronic processing as well as providing the added benefits of compact footprint, high stability, high scalability, and small power consumption. The increasing demand for high performance nonlinear integrated ph… ▽ More Integrated photonic devices operating via optical nonlinearities offer a powerful solution for all optical information processing, yielding processing speeds that are well beyond that of electronic processing as well as providing the added benefits of compact footprint, high stability, high scalability, and small power consumption. The increasing demand for high performance nonlinear integrated photonic devices has facilitated the hybrid integration of novel materials to address the limitations of existing integrated photonic platforms, such as strong nonlinear optical absorption or an inadequate optical nonlinearity. Recently, graphene oxide (GO), with its large optical nonlinearity, high flexibility in altering its properties, and facile fabrication processes, has attracted significant attention, enabling many hybrid nonlinear integrated photonic devices with improved performance and novel capabilities. This paper reviews the applications of GO to nonlinear integrated photonics. First, an overview of GOs optical properties and the fabrication technologies needed for its onchip integration is provided. Next, the state of the art GO nonlinear integrated photonic devices are reviewed, together with comparisons of the nonlinear optical performance of different integrated platforms incorporating GO. Finally, the challenges and perspectives of this field are discussed. △ Less

Submitted 4 January, 2023; originally announced January 2023.

Comments: 71 pages, 16 figures, 405 references

Journal ref: Laser and Photonics Reviews, vol. 17, article 2200512 (2023)

GAUCHE: A Library for Gaussian Processes in Chemistry

Authors: Ryan-Rhys Griffiths, Leo Klarner, Henry B. Moss, Aditya Ravuri, Sang Truong, Samuel Stanton, Gary Tom, Bojana Rankovic, Yuanqi Du, Arian Jamasb, Aryan Deshwal, Julius Schwartz, Austin Tripp, Gregory Kell, Simon Frieder, Anthony Bourached, Alex Chan, Jacob Moss, Chengzhi Guo, Johannes Durholt, Saudamini Chaurasia, Felix Strieth-Kalthoff, Alpha A. Lee, Bingqing Cheng, Alán Aspuru-Guzik , et al. (2 additional authors not shown)

Abstract: We introduce GAUCHE, a library for GAUssian processes in CHEmistry. Gaussian processes have long been a cornerstone of probabilistic machine learning, affording particular advantages for uncertainty quantification and Bayesian optimisation. Extending Gaussian processes to chemical representations, however, is nontrivial, necessitating kernels defined over structured inputs such as graphs, strings… ▽ More We introduce GAUCHE, a library for GAUssian processes in CHEmistry. Gaussian processes have long been a cornerstone of probabilistic machine learning, affording particular advantages for uncertainty quantification and Bayesian optimisation. Extending Gaussian processes to chemical representations, however, is nontrivial, necessitating kernels defined over structured inputs such as graphs, strings and bit vectors. By defining such kernels in GAUCHE, we seek to open the door to powerful tools for uncertainty quantification and Bayesian optimisation in chemistry. Motivated by scenarios frequently encountered in experimental chemistry, we showcase applications for GAUCHE in molecular discovery and chemical reaction optimisation. The codebase is made available at https://github.com/leojklarner/gauche △ Less

Submitted 21 February, 2023; v1 submitted 6 December, 2022; originally announced December 2022.

Photo-thermal tuning of graphene oxide coated integrated optical waveguides

Authors: David J. Moss

Abstract: We experimentally investigate power sensitive photothermal tuning (PTT) of two dimensional (2D) graphene oxide (GO) films coated on integrated optical waveguides. We measure the light power thresholds for reversible and permanent GO reduction in silicon nitride (SiN) waveguides integrated with 1 and 2 layers of GO. Raman spectra at different positions of a hybrid waveguide with permanently reduced… ▽ More We experimentally investigate power sensitive photothermal tuning (PTT) of two dimensional (2D) graphene oxide (GO) films coated on integrated optical waveguides. We measure the light power thresholds for reversible and permanent GO reduction in silicon nitride (SiN) waveguides integrated with 1 and 2 layers of GO. Raman spectra at different positions of a hybrid waveguide with permanently reduced GO are characterized, verifying the inhomogeneous GO reduction along the direction of light propagation through the waveguide. The differences between the PTT induced by a continuous wave laser and a pulsed laser are also compared, confirming that the PTT mainly depend on the average input power. These results reveal interesting features for 2D GO films coated on integrated optical waveguides, which are of fundamental importance for the control and engineering of GO properties in hybrid integrated photonic devices. △ Less

Submitted 5 November, 2022; originally announced November 2022.

Comments: 12 pages, 6 figures, 99 references

Journal ref: Micromachines volume 13, page 1194 (2022)

Spectral engineering of integrated photonic filters using mode splitting in silicon nanowire integrated standing-wave resonators

Authors: David J. Moss

Abstract: Mode splitting induced by coherent optical mode interference in coupled resonant cavities is a key phenomenon in photonic resonators that can lead to powerful and versatile filtering functions, in close analogy to electromagnetically-induced-transparency, Autler-Townes splitting, Fano resonances, and dark states. It can not only break the dependence between quality factor, free spectral range, and… ▽ More Mode splitting induced by coherent optical mode interference in coupled resonant cavities is a key phenomenon in photonic resonators that can lead to powerful and versatile filtering functions, in close analogy to electromagnetically-induced-transparency, Autler-Townes splitting, Fano resonances, and dark states. It can not only break the dependence between quality factor, free spectral range, and physical cavity length, but can also lead to group delay response and mode interactions that are useful for enhancing light-material interaction and dispersion engineering in nonlinear optics. In this work, we investigate mode splitting in standing-wave (SW) resonators implemented by cascaded Sagnac loop reflectors (CSLRs) and demonstrate its use for engineering the spectral profile of integrated photonic filters. By changing the reflectivity of the Sagnac loop reflectors (SLRs) and the phase shifts along the connecting waveguides, we tailor mode splitting in the CSLR resonators to achieve a wide range of filter shapes for diverse applications including enhanced light trapping, flat-top filtering, Q factor enhancement, and signal reshaping. We present the theoretical designs and compare the performance of CSLR resonators with three, four, and eight SLRs fabricated in silicon-on-insulator nanowires. We achieve high performance and versatile filter shapes via diverse mode splitting that agree well with theory. The experimental results confirm the effectiveness of our approach towards realizing integrated multi-functional SW filters for flexible spectral engineering. △ Less

Submitted 18 October, 2022; originally announced October 2022.

Comments: 11pages, 6 figures, 116 references. arXiv admin note: substantial text overlap with arXiv:1805.05405

Journal ref: SPIE Volume 10923, Silicon Photonics XIV, 109230W (2019)

Validity of sound-proof approximations for magnetic buoyancy

Authors: John B. Moss, Toby S. Wood, Paul J. Bushby

Abstract: The presence of acoustic waves in models of compressible flows can present complications for analytical and numerical analysis. Therefore, several methods have been developed to filter out these waves, leading to various "sound-proof" models, including the Boussinesq, anelastic and pseudo-incompressible models. We assess the validity of each of these approximate models for describing magnetic buoy… ▽ More The presence of acoustic waves in models of compressible flows can present complications for analytical and numerical analysis. Therefore, several methods have been developed to filter out these waves, leading to various "sound-proof" models, including the Boussinesq, anelastic and pseudo-incompressible models. We assess the validity of each of these approximate models for describing magnetic buoyancy in the context of the solar interior. A general sound-proof model is introduced and compared to the fully compressible system in a number of asymptotic regimes, including both non-rotating and rotating cases. We obtain specific constraints that must be satisfied in order that the model captures the leading-order behaviour of the fully compressible system. We then discuss which of the existing sound-proof models satisfy these constraints, and in what parameter regimes. We also present a variational derivation of the pseudo-incompressible MHD model, demonstrating its underlying Hamiltonian structure. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Neuromorphic computing using wavelength-division multiplexing

Authors: Xingyuan Xu, Weiwei Han, Mengxi Tan, Yang Sun, Yang Li, Jiayang Wu, Roberto Morandotti, Arnan Mitchell, Kun Xu, David J. Moss

Abstract: Optical neural networks (ONNs), or optical neuromorphic hardware accelerators, have the potential to dramatically enhance the computing power and energy efficiency of mainstream electronic processors, due to their ultralarge bandwidths of up to 10s of terahertz together with their analog architecture that avoids the need for reading and writing data back and forth. Different multiplexing technique… ▽ More Optical neural networks (ONNs), or optical neuromorphic hardware accelerators, have the potential to dramatically enhance the computing power and energy efficiency of mainstream electronic processors, due to their ultralarge bandwidths of up to 10s of terahertz together with their analog architecture that avoids the need for reading and writing data back and forth. Different multiplexing techniques have been employed to demonstrate ONNs, amongst which wavelength division multiplexing (WDM) techniques make sufficient use of the unique advantages of optics in terms of broad bandwidths. Here, we review recent advances in WDM based ONNs, focusing on methods that use integrated microcombs to implement ONNs. We present results for human image processing using an optical convolution accelerator operating at 11 Tera operations per second. The open challenges and limitations of ONNs that need to be addressed for future applications are also discussed. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Comments: 13 pages, 8 figures, 160 references

Journal ref: IEEE Journal of Selected Topics in Quantum Electronics Volume 28, Early Access (2022)

Enhanced self-phase modulation in silicon nitride waveguides integrated with 2D graphene oxide films

Authors: Yuning Zhang, Jiayang Wu, Yunyi Yang, Yang Qu, Houssein El Dirani, Romain Crochemore, Corrado Sciancalepore, Pierre Demongodin, Christian Grillet, Christelle Monat, Baohua Jia, David J. Moss

Abstract: We experimentally demonstrate enhanced self-phase modulation (SPM) in silicon nitride (Si3N4) waveguides integrated with 2D graphene oxide (GO) films. GO films are integrated onto Si3N4 waveguides using a solution-based, transfer-free coating method that enables precise control of the film thickness. Detailed SPM measurements are carried out using both picosecond and femtosecond optical pulses. Ow… ▽ More We experimentally demonstrate enhanced self-phase modulation (SPM) in silicon nitride (Si3N4) waveguides integrated with 2D graphene oxide (GO) films. GO films are integrated onto Si3N4 waveguides using a solution-based, transfer-free coating method that enables precise control of the film thickness. Detailed SPM measurements are carried out using both picosecond and femtosecond optical pulses. Owing to the high Kerr nonlinearity of GO, the hybrid waveguides show significantly improved spectral broadening compared to the uncoated waveguide, achieving a broadening factor of up to ~3.4 for a device with 2 layers of GO. By fitting the experimental results with theory, we obtain an improvement in the waveguide nonlinear parameter by a factor of up to 18.4 and a Kerr coefficient (n2) of GO that is about 5 orders of magnitude higher than Si3N4. Finally, we provide a theoretical analysis for the influence of GO film length, coating position, and its saturable absorption on the SPM performance. These results verify the effectiveness of on-chip integrating 2D GO films to enhance the nonlinear optical performance of Si3N4 devices. △ Less

Submitted 31 May, 2022; originally announced May 2022.

Comments: 11 pages, 9 figures, 63 references. arXiv admin note: text overlap with arXiv:2205.06942

Journal ref: IEEE Journal of Selected Topics in Quantum Electronics (JSTQE), Early Access (2022)

Enhanced spectral broadening via self-phase modulation with femtosecond optical pulses in silicon nanowires integrated with 2D graphene oxide films

Authors: Yuning Zhang, Jiayang Wu, Yunyi Yang, Yang Qu, Linnan Jia, Baohua Jia, David J. Moss

Abstract: We experimentally demonstrate enhanced spectral broadening of femtosecond optical pulses af-ter propagation through silicon-on-insulator (SOI) nanowire waveguides integrated with two-dimensional (2D) graphene oxide (GO) films. Owing to the strong mode overlap between the SOI nanowires and the GO films with a high Kerr nonlinearity, the self-phase modulation (SPM) process in the hybrid waveguides i… ▽ More We experimentally demonstrate enhanced spectral broadening of femtosecond optical pulses af-ter propagation through silicon-on-insulator (SOI) nanowire waveguides integrated with two-dimensional (2D) graphene oxide (GO) films. Owing to the strong mode overlap between the SOI nanowires and the GO films with a high Kerr nonlinearity, the self-phase modulation (SPM) process in the hybrid waveguides is significantly enhanced, resulting in greatly improved spectral broadening of the femtosecond optical pulses. A solution-based, transfer-free coating method is used to integrate GO films onto the SOI nanowires with precise control of the film thickness. Detailed SPM measurements using femtosecond optical pulses are carried out, achieving a broadening factor of up to ~4.3 for a device with 0.4-mm-long, 2 layers of GO. By fit-ting the experimental results with theory, we obtain an improvement in the waveguide nonlin-ear parameter by a factor of ~3.5 and the effective nonlinear figure of merit (FOM) by a factor of ~3.8, relative to the uncoated waveguide. Finally, we discuss the influence of GO film length on the spectral broadening and compare the nonlinear optical performance of different integrated waveguides coated with GO films. These results confirm the improved nonlinear optical per-formance for silicon devices integrated with 2D GO films. △ Less

Submitted 13 May, 2022; originally announced May 2022.

Comments: 16 pages, 6 figures, 53 references, 1 table

Journal ref: Micromachines volume 13 page 756 (2022)

Silicon nanophotonic chips featuring Sagnac loop reflectors as a basis for advanced optical spectral filters

Authors: David J. Moss

Abstract: We present and investigate theoretically photonic integrated filters based on 2 Sagnac coupled loop reflectors (SLRs) that are arranged in a self-coupled optical waveguide. We recently presented photonic integrated filters based on coupled and cascaded SLRs. In this paper, we advance this field by investigating a unique approach of employing coupled SLRs formed by self-coupled waveguides. This all… ▽ More We present and investigate theoretically photonic integrated filters based on 2 Sagnac coupled loop reflectors (SLRs) that are arranged in a self-coupled optical waveguide. We recently presented photonic integrated filters based on coupled and cascaded SLRs. In this paper, we advance this field by investigating a unique approach of employing coupled SLRs formed by self-coupled waveguides. This allows us to achieve high performance filter functions including Fano-like resonances and wavelength interleaving with a simpler design and a higher fabrication tolerance by tailoring coherent mode interference in the device. Our design takes into account the device fabrication issues as well as the requirements for practical applications. As a guide for practical device fabrication, an analysis of the impact of the structural parameters and fabrication tolerance on each filter function is also provided. The Fano-like resonances show a low insertion loss (IL) of 1.1 dBでしべる, a high extinction ratio of 30.2 dBでしべる, and a high slope rate (SR) of 747.64 dBでしべる/nm. The combination of low IL and high SR promises this device for Fano resonance applications. Our device also can achieve wavelength de-interleaving function with high fabrication tolerance which is advantageous for applications such as optical interleavers that require a symmetric flat-top filter shape. Optical de-interleavers and interleavers are key components for optical signal multiplexing and demultiplexing for wavelength division multiplexing optical communication systems. Versatile spectral responses with a simple design, compact device footprint, and high fabrication tolerance make this approach highly promising for flexible response shaping for many applications. △ Less

Submitted 7 April, 2022; originally announced April 2022.

Comments: 9 pages, 5 figures, 97 references

Journal ref: Paper PW22O-OE201-20, SPIE-Opto, Integrated Optics: Devices, Materials, and Technologies XXVI, SPIE Photonics West, San Francisco CA January 22 - 27 (2022)

Graphene oxide 2D films integrated with nanowires and ring resonators for enhanced nonlinear optics

Authors: David J. Moss

Abstract: We report enhanced nonlinear optics in nanowires, waveguides, and ring resonators by introducing layered two-dimensional (2D) graphene oxide (GO) films through experimental demonstration. The GO films are integrated on silicon-on-insulator nanowires (SOI), high index doped silica glass, and silicon nitride (SiN) waveguides and microring resonators (MRRs), to demonstrate an improved optical nonline… ▽ More We report enhanced nonlinear optics in nanowires, waveguides, and ring resonators by introducing layered two-dimensional (2D) graphene oxide (GO) films through experimental demonstration. The GO films are integrated on silicon-on-insulator nanowires (SOI), high index doped silica glass, and silicon nitride (SiN) waveguides and microring resonators (MRRs), to demonstrate an improved optical nonlinearity including Kerr nonlinearity and four-wave mixing (FWM). By using a large-area, transfer-free, layer-by-layer GO coating method with photolithography and lift-off processes, we integrate GO films on these complementary metal-oxide-semiconductor (CMOS)-compatible devices. For SOI nanowires, significant spectral broadening of optical pulses in GO-coated SOI nanowires induced by self-phase modulation (SPM) is observed, achieving a high spectral broadening factor of 4.34 for a device with a patterned film including 10 layers of GO. A significant enhancement in the nonlinear figure of merit (FOM) for silicon nanowires by a factor of 20 is also achieved, resulting in a FOM > 5. For Hydex and SiN waveguides, enhanced FWM in the GO-coated waveguides is achieved, where conversion efficiency (CE) enhancements of up to 6.9 dBでしべる and 9.1 dBでしべる relative to the uncoated waveguides. For MRRs, an increase of up to ~10.3 dBでしべる in the FWM CE is achieved due to the resonant enhancement effect. These results reveal the strong potential of GO films to improve the nonlinear optics of nanowires, waveguides, and ring resonators. △ Less

Submitted 6 April, 2022; originally announced April 2022.

Comments: 13 pages, 7 figures, 112 references. arXiv admin note: substantial text overlap with arXiv:2106.10779; text overlap with arXiv:2004.08043, arXiv:2006.14944

Journal ref: Proc. SPIE 12002, Oxide-based Materials and Devices XIII, 120020E (5 March, 2022)

Integral order photonic RF and microwave signal processors based on soliton crystal Kerr micro-combs

Authors: Mengxi Tan, Xingyuan Xu, David J. Moss

Abstract: Soliton crystal micro-combs are powerful tools as sources of multiple wavelength channels for radio frequency (RF) signal processing. They offer a compact device footprint, large numbers of wavelengths, very high versatility, and wide Nyquist bandwidths. Here, we demonstrate integral order RF signal processing functions based on a soliton crystal micro-comb, including a Hilbert transformer and fir… ▽ More Soliton crystal micro-combs are powerful tools as sources of multiple wavelength channels for radio frequency (RF) signal processing. They offer a compact device footprint, large numbers of wavelengths, very high versatility, and wide Nyquist bandwidths. Here, we demonstrate integral order RF signal processing functions based on a soliton crystal micro-comb, including a Hilbert transformer and first- to third-order differentiators. We compare and contrast results achieved and the tradeoffs involved with varying comb spacing, tap design methods, as well as shaping methods. △ Less

Submitted 12 October, 2021; originally announced October 2021.

Comments: 12 pages, 10 figures, 110 references, 1 table

Journal ref: IOP Journal of Optics, volume 23, early access (2021)

Frequency comb distillation for optical superchannel transmission

Authors: Chawaphon Prayoonyong, Andreas Boes, Xingyuan Xu, Mengxi Tan, Sai T. Chu, Brent E. Little, Roberto Morandotti, Arnan Mitchell, David J. Moss, Bill Corcoran

Abstract: Optical frequency combs can potentially provide an efficient light source for multi-terabit-per-second optical superchannels. However, as the bandwidth of these multi-wavelength light sources is increased, it can result in low per-line power. Optical amplifiers can be used to overcome power limitations, but the accompanying spontaneous optical noise can degrade performance in optical systems. To o… ▽ More Optical frequency combs can potentially provide an efficient light source for multi-terabit-per-second optical superchannels. However, as the bandwidth of these multi-wavelength light sources is increased, it can result in low per-line power. Optical amplifiers can be used to overcome power limitations, but the accompanying spontaneous optical noise can degrade performance in optical systems. To overcome this, we demonstrate wideband noise reduction for comb lines using a high-Q microring resonator whose resonances align with the comb lines, providing tight optical filtering of multiple combs lines at the same time. By distilling an optical frequency comb in this way, we are able to reduce the required comb line OSNR when these lines are used in a coherent optical communications system. Through performance tests on a 19.45-GHz-spaced comb generating 71 lines, using 18 Gbaud, 64-QAM sub-channels at a spectral efficiency of 10.6 b/s/Hz, we find that noise-corrupted comb lines can reduce the optical signal-to-noise ratio required for the comb by ~ 9 dBでしべる when used as optical carriers at the transmitter side, and by ~ 12 dBでしべる when used as a local oscillator at the receiver side. This demonstration provides a method to enable low power optical frequency combs to be able to support high bandwidth and high-capacity communications. △ Less

Submitted 2 October, 2021; originally announced October 2021.

Comments: 10 pages, 13 figures, 56 references

Journal ref: Journal of Lightwave Technology Volume 39 Early Access (2021)

Highly tunable broadband RF photonic fractional Hilbert transformer based on a Kerr soliton crystal microcomb source

Authors: Mengxi Tan, Xingyuan Xu, David J. Moss

Abstract: We demonstrate an RF photonic fractional Hilbert transformer based on an integrated Kerr micro-comb source featuring a record low free spectral range of 48.9 GHz, yielding 75 microcomb lines across the C-band. By programming and shaping the comb lines according to calculated tap weights, we demonstrate that the Hilbert transformer can achieve tunable bandwidths ranging from 1.2 to 15.3 GHz, switch… ▽ More We demonstrate an RF photonic fractional Hilbert transformer based on an integrated Kerr micro-comb source featuring a record low free spectral range of 48.9 GHz, yielding 75 microcomb lines across the C-band. By programming and shaping the comb lines according to calculated tap weights, we demonstrate that the Hilbert transformer can achieve tunable bandwidths ranging from 1.2 to 15.3 GHz, switchable centre frequencies from baseband to 9.5 GHz, and arbitrary fractional orders. We experimentally characterize the RF amplitude and phase response of the tunable bandpass and lowpass Hilbert transformers with 90 and 45-degree phase shift. The experimental results show good agreement with theory, confirming the effectiveness of our approach as a powerful way to implement the standard as well as fractional Hilbert transformers with broad and switchable processing bandwidths and centre frequencies, together with high reconfigurability and greatly reduced size and complexity. △ Less

Submitted 30 July, 2021; originally announced August 2021.

Comments: 8 pages, 6 figures, 87 references

Journal ref: Journal of Lightwave Technology, volume 39, Early Access (2021)

Design of microring resonators integrated with 2D graphene oxide films for four-wave mixing

Authors: Yuning Zhang, Jiayang Wu, Yang Qu, Linnan Jia, Baohua Jia, David J. Moss

Abstract: We theoretically investigate and optimize the performance of four-wave mixing (FWM) in microring resonators (MRRs) integrated with two-dimensional (2D) layered graphene oxide (GO) films. Owing to the interaction between the MRRs and the highly nonlinear GO films as well as to the resonant enhancement effect, the FWM efficiency in GO-coated MRRs can be significantly improved. Based on previous expe… ▽ More We theoretically investigate and optimize the performance of four-wave mixing (FWM) in microring resonators (MRRs) integrated with two-dimensional (2D) layered graphene oxide (GO) films. Owing to the interaction between the MRRs and the highly nonlinear GO films as well as to the resonant enhancement effect, the FWM efficiency in GO-coated MRRs can be significantly improved. Based on previous experiments, we perform detailed analysis for the influence of the GO film parameters and MRR coupling strength on the FWM conversion efficiency (CE) of the hybrid MRRs. By optimizing the device parameters to balance the trade-off between the Kerr nonlinearity and loss, we achieve a high CE enhancement of ~18.6 dBでしべる relative to the uncoated MRR, which is ~8.3 dBでしべる higher than previous experimental results. The influence of photo-thermal changes in the GO films as well as variations in the MRR parameters such as the ring radius and waveguide dispersion on the FWM performance is also discussed. These results highlight the significantly improved FWM performance that can be achieved in MRRs incorporating GO films and provide a guide for optimizing their FWM performance. △ Less

Submitted 30 July, 2021; originally announced August 2021.

Comments: 11 pages, 10 figures, 40 references

Journal ref: Journal of Lightwave Technology, Volume 39, Early Access (2021)

Ultra-high bandwidth fiber-optic data transmission with a single chip source

Authors: David J. Moss

Abstract: We report world record high data transmission over standard optical fiber from a single optical source. We achieve a line rate of 44.2 Terabits per second (Tb/s) employing only the C-band at 1550nm, resulting in a spectral efficiency of 10.4 bits/s/Hz. We use a new and powerful class of micro-comb called soliton crystals that exhibit robust operation and stable generation as well as a high intrins… ▽ More We report world record high data transmission over standard optical fiber from a single optical source. We achieve a line rate of 44.2 Terabits per second (Tb/s) employing only the C-band at 1550nm, resulting in a spectral efficiency of 10.4 bits/s/Hz. We use a new and powerful class of micro-comb called soliton crystals that exhibit robust operation and stable generation as well as a high intrinsic efficiency that, together with an extremely low spacing of 48.9 GHz enables a very high coherent data modulation format of 64 QAM. We achieve error free transmission across 75 km of standard optical fiber in the lab and over a field trial with a metropolitan optical fiber network. This work demonstrates the ability of optical micro-combs to exceed other approaches in performance for the most demanding practical optical communications applications. △ Less

Submitted 30 May, 2021; originally announced June 2021.

Comments: 22 pages, 9 figures, 178 references. arXiv admin note: text overlap with arXiv:2003.11893, arXiv:2103.03354

Journal ref: Paper No.11713-8, PW21O-OE803-23, Next-Generation Optical Communication: Components, Sub-Systems, and Systems X, SPIE Photonics West (2021)

Spectral Shaping with Integrated Self-Coupled Sagnac Loop Reflectors

Authors: David J. Moss

Abstract: We propose and theoretically investigate integrated photonic filters based on coupled Sagnac loop reflectors (SLRs) formed by a self-coupled wire waveguide. By tailoring coherent mode interference in the device, three different filter functions are achieved, including Fano-like resonances, wavelength interleaving, and varied resonance mode splitting. For each function, the impact of device structu… ▽ More We propose and theoretically investigate integrated photonic filters based on coupled Sagnac loop reflectors (SLRs) formed by a self-coupled wire waveguide. By tailoring coherent mode interference in the device, three different filter functions are achieved, including Fano-like resonances, wavelength interleaving, and varied resonance mode splitting. For each function, the impact of device structural parameters is analyzed to facilitate optimized performance. Our results theoretically verify the proposed device as a compact multi-functional integrated photonic filter for flexible spectral shaping. △ Less

Submitted 8 June, 2021; originally announced June 2021.

Comments: 6 pages,4 figures, 89 references

Journal ref: IEEE Photonics Technology Letters, Volume 33 Early Access (2021)

Photonic single perceptron at Giga-OP/s speeds with Kerr microcombs for scalable optical neural networks

Authors: Mengxi Tan, Xingyuan Xu, David J. Moss

Abstract: Optical artificial neural networks (ONNs) have significant potential for ultra-high computing speed and energy efficiency. We report a novel approach to ONNs that uses integrated Kerr optical microcombs. This approach is programmable and scalable and is capable of reaching ultrahigh speeds. We demonstrate the basic building block ONNs, a single neuron perceptron, by mapping synapses onto 49 wavele… ▽ More Optical artificial neural networks (ONNs) have significant potential for ultra-high computing speed and energy efficiency. We report a novel approach to ONNs that uses integrated Kerr optical microcombs. This approach is programmable and scalable and is capable of reaching ultrahigh speeds. We demonstrate the basic building block ONNs, a single neuron perceptron, by mapping synapses onto 49 wavelengths to achieve an operating speed of 11.9 x 109 operations per second, or GigaOPS, at 8 bits per operation, which equates to 95.2 gigabits/s (Gbps). We test the perceptron on handwritten digit recognition and cancer cell detection, achieving over 90% and 85% accuracy, respectively. By scaling the perceptron to a deep learning network using off the shelf telecom technology we can achieve high throughput operation for matrix multiplication for real-time massive data processing. △ Less

Submitted 12 May, 2021; originally announced May 2021.

Comments: 14 pages, 8 figures, 107 references. arXiv admin note: substantial text overlap with arXiv:2101.12356

Journal ref: SPIE Paper 11690-21, PW21O-OE202-28, Smart Photonic and Optoelectronic Integrated Circuits XXIII, March (2021)

Optical neuromorphic processing at Tera-OP/s speeds based on Kerr soliton crystal microcombs

Authors: Mengxi Tan, Xingyuan Xu, David J. Moss

Abstract: Convolutional neural networks (CNNs), inspired by biological visual cortex systems, are a powerful category of artificial neural networks that can extract the hierarchical features of raw data to greatly reduce the network parametric complexity and enhance the predicting accuracy. They are of significant interest for machine learning tasks such as computer vision, speech recognition, playing board… ▽ More Convolutional neural networks (CNNs), inspired by biological visual cortex systems, are a powerful category of artificial neural networks that can extract the hierarchical features of raw data to greatly reduce the network parametric complexity and enhance the predicting accuracy. They are of significant interest for machine learning tasks such as computer vision, speech recognition, playing board games and medical diagnosis. Optical neural networks offer the promise of dramatically accelerating computing speed to overcome the inherent bandwidth bottleneck of electronics. Here, we demonstrate a universal optical vector convolutional accelerator operating beyond 10 TeraOPS (TOPS: operations per second), generating convolutions of images of 250,000 pixels with 8 bit resolution for 10 kernels simultaneously, enough for facial image recognition. We then use the same hardware to sequentially form a deep optical CNN with ten output neurons, achieving successful recognition of full 10 digits with 900 pixel handwritten digit images with 88% accuracy. Our results are based on simultaneously interleaving temporal, wavelength and spatial dimensions enabled by an integrated microcomb source. This approach is scalable and trainable to much more complex networks for demanding applications such as unmanned vehicle and real time video recognition. △ Less

Submitted 12 May, 2021; originally announced May 2021.

Comments: 28 pages, 21 figures, 110 references. arXiv admin note: substantial text overlap with arXiv:2011.07393

Journal ref: SPIE Integrated Optics: Devices, Materials, and Technologies XXV Paper 11689-38, PW21O-OE201-67 January (2021)

Photonic Microwave and RF Channelizers using Kerr Micro-combs

Authors: Mengxi Tan, Xingyuan Xu, David J. Moss

Abstract: We review recent work on broadband RF channelizers based on integrated optical frequency Kerr micro-combs combined with passive micro-ring resonator filters, with microcombs having channel spacings of 200GHz and 49GHz. This approach to realizing RF channelizers offers reduced complexity, size, and potential cost for a wide range of applications to microwave signal detection. We review recent work on broadband RF channelizers based on integrated optical frequency Kerr micro-combs combined with passive micro-ring resonator filters, with microcombs having channel spacings of 200GHz and 49GHz. This approach to realizing RF channelizers offers reduced complexity, size, and potential cost for a wide range of applications to microwave signal detection. △ Less

Submitted 12 April, 2021; originally announced April 2021.

Comments: 25 pages, 11 figures, 185 references. arXiv admin note: text overlap with arXiv:1805.05474, arXiv:2005.02869

Journal ref: IOP Journal of Semiconductors, volume 42, issue 4, 041302 (2021)

Design of silicon waveguides for Kerr nonlinear optical performance with graphene oxide films

Authors: Yuning Zhang, Jiayang Wu, Yang Qu, Linnan Jia, Baohua Jia, David J. Moss

Abstract: The Kerr nonlinear optical performance of silicon nanowire waveguides integrated with 2D layered graphene oxide (GO) films is theoretically studied and optimized based on experimentally measured linear and nonlinear optical parameters of the GO films. The strong mode overlap between the silicon nanowires and highly nonlinear GO films yields a significantly enhanced Kerr nonlinearity for the hybrid… ▽ More The Kerr nonlinear optical performance of silicon nanowire waveguides integrated with 2D layered graphene oxide (GO) films is theoretically studied and optimized based on experimentally measured linear and nonlinear optical parameters of the GO films. The strong mode overlap between the silicon nanowires and highly nonlinear GO films yields a significantly enhanced Kerr nonlinearity for the hybrid waveguides. A detailed analysis for the influence of waveguide geometry and GO film thickness on the propagation loss, nonlinear parameter, and nonlinear figure of merit (FOM) is performed. The results show that the effective nonlinear parameter and nonlinear FOM can be increased by up to 52 and 79 times relative to bare silicon nanowires, respectively. Self-phase modulation (SPM)-induced spectral broadening of optical pulses is used as a benchmark to evaluate the nonlinear performance, examining the tradeoff between enhancing Kerr nonlinearity and minimizing loss. By optimizing the device parameters to balance this, a high spectral broadening factor of 27.8 can be achieved, more than 6 times that achieved in previous experiments. Finally, the influence of pulse chirp, material anisotropy, and the interplay between saturable absorption and SPM is also discussed, together with the comparison between the spectral broadening after going through GO-coated and graphene-coated silicon waveguides. These results provide useful guidance for optimizing the Kerr nonlinear optical performance of silicon waveguides integrated with 2D layered GO films. △ Less

Submitted 12 April, 2021; originally announced April 2021.

Comments: 16 pages, 12 figures, 119 references

Journal ref: Journal of Lightwave Technology volume 39 Early Access (2021)

Radio frequency spectrum analyzer with a 5 THz bandwidth based on nonlinear optics in a CMOS compatible high-index doped silica waveguide

Authors: Yuhua Li, Zhe Kang, Kun Zhu, Shiqi Ai, Xiang Wang, Roy R. Davidson, Yan Wu, Roberto Morandotti, Brent E. Little, David J. Moss, Sai Tak Chu

Abstract: We report an all-optical radio-frequency (RF) spectrum analyzer with a bandwidth greater than 5 terahertz (THz), based on a 50-cm long spiral waveguide in a CMOS-compatible high-index doped silica platform. By carefully mapping out the dispersion profile of the waveguides for different thicknesses, we identify the optimal design to achieve near zero dispersion in the C-band. To demonstrate the cap… ▽ More We report an all-optical radio-frequency (RF) spectrum analyzer with a bandwidth greater than 5 terahertz (THz), based on a 50-cm long spiral waveguide in a CMOS-compatible high-index doped silica platform. By carefully mapping out the dispersion profile of the waveguides for different thicknesses, we identify the optimal design to achieve near zero dispersion in the C-band. To demonstrate the capability of the RF spectrum analyzer, we measure the optical output of a femtosecond fiber laser with an ultrafast optical RF spectrum in the terahertz regime. △ Less

Submitted 18 March, 2021; originally announced March 2021.

Comments: 5 pages, 6 figures, 26 references

Journal ref: Optics Letters Volume 46, Issue 7, pages 1574-1577 (2021)

High Performance Optical Filters Using Three Waveguide Coupled Sagnac Loop Reflectors

Authors: H. Arianfard, J. Wu, S. Juodkazis, D. J. Moss

Abstract: We theoretically investigate advanced multi-functional integrated photonic filters formed by three waveguide coupled Sagnac loop reflectors (3WC-SLRs). By tailoring the coherent mode interference, the spectral response of the 3WC-SLR resonators is engineered to achieve diverse filtering functions with high performance. These include optical analogues of Fano resonances that yield ultrahigh spectra… ▽ More We theoretically investigate advanced multi-functional integrated photonic filters formed by three waveguide coupled Sagnac loop reflectors (3WC-SLRs). By tailoring the coherent mode interference, the spectral response of the 3WC-SLR resonators is engineered to achieve diverse filtering functions with high performance. These include optical analogues of Fano resonances that yield ultrahigh spectral extinction ratios (ERs) and slope rates, resonance mode splitting with high ERs and low free spectral ranges, and classical Butterworth, Bessel, Chebyshev, and elliptic filters. A detailed analysis of the impact of the structural parameters and fabrication tolerances is provided to facilitate device design and optimization. The requirements for practical applications are also considered. These results theoretically verify the effectiveness of using 3WC-SLR resonators as multi-functional integrated photonic filters for flexible spectral engineering in diverse applications. △ Less

Submitted 13 March, 2021; originally announced March 2021.

Comments: 12 pages, 12 figures, 178 references

Journal ref: Journal of Lightwave Technology, vol. 39 Early Access (2021)

High bandwidth temporal RF photonic signal processing with Kerr micro-combs: integration, fractional differentiation and Hilbert transforms

Authors: Mengxi Tan, Xingyuan Xu, Jiayang Wu, David J. Moss

Abstract: Integrated Kerr micro-combs, a powerful source of many wavelengths for photonic RF and microwave signal processing, are particularly useful for transversal filter systems. They have many advantages including a compact footprint, high versatility, large numbers of wavelengths, and wide bandwidths. We review recent progress on photonic RF and microwave high bandwidth temporal signal processing based… ▽ More Integrated Kerr micro-combs, a powerful source of many wavelengths for photonic RF and microwave signal processing, are particularly useful for transversal filter systems. They have many advantages including a compact footprint, high versatility, large numbers of wavelengths, and wide bandwidths. We review recent progress on photonic RF and microwave high bandwidth temporal signal processing based on Kerr micro-combs with spacings from 49-200GHz. We cover integral and fractional Hilbert transforms, differentiators as well as integrators. The potential of optical micro-combs for RF photonic applications in functionality and ability to realize integrated solutions is also discussed. △ Less

Submitted 17 February, 2021; originally announced March 2021.

Comments: 42 pages, 22 figures, 200 references

Journal ref: Advances in Physics X, VOL. 6, NO. 1, 1838946 (2021)

Optical data transmission field trial @ 44Tb/s with a 49GHz Kerr soliton crystal microcomb

Authors: Mengxi Tan, Xingyuan Xu, David J. Moss

Abstract: We report world record high data transmission over standard optical fiber from a single optical source. We achieve a line rate of 44.2 Terabits per second (Tb/s) employing only the C-band at 1550nm, resulting in a spectral efficiency of 10.4 bits/s/Hz. We use a new and powerful class of micro-comb called soliton crystals that exhibit robust operation and stable generation as well as a high intrins… ▽ More We report world record high data transmission over standard optical fiber from a single optical source. We achieve a line rate of 44.2 Terabits per second (Tb/s) employing only the C-band at 1550nm, resulting in a spectral efficiency of 10.4 bits/s/Hz. We use a new and powerful class of micro-comb called soliton crystals that exhibit robust operation and stable generation as well as a high intrinsic efficiency that, together with an extremely low spacing of 48.9 GHz enables a very high coherent data modulation format of 64 QAM. We achieve error free transmission across 75 km of standard optical fiber in the lab and over a field trial with a metropolitan optical fiber network. This work demonstrates the ability of optical micro-combs to exceed other approaches in performance for the most demanding practical optical communications applications. △ Less

Submitted 28 January, 2021; originally announced March 2021.

Comments: 5 pages, 5 figures, 81 references

Journal ref: IEEE Microwave Photonics Conference 2020 talk We2.3

Broadband photonic RF channelizer with a Kerr soliton crystal micro-comb

Authors: Mengxi Tan, Xingyuan Xu, David J. Moss

Abstract: We report a 92 channel RF channelizer based on a 48.9 GHz integrated micro-comb that operates via soliton crystals, together with a passive high-Q ring resonator that acts as a periodic filter with an optical 3dBでしべる bandwidth of 121.4 MHz. We obtain an instant RF bandwidth of 8.08 GHz and 17.55 GHz achieved through temperature tuning. These results represent a major advance to achieving fully integra… ▽ More We report a 92 channel RF channelizer based on a 48.9 GHz integrated micro-comb that operates via soliton crystals, together with a passive high-Q ring resonator that acts as a periodic filter with an optical 3dBでしべる bandwidth of 121.4 MHz. We obtain an instant RF bandwidth of 8.08 GHz and 17.55 GHz achieved through temperature tuning. These results represent a major advance to achieving fully integrated photonic RF spectrum channelizers with reduced low complexity, size, and high performance for digital-compatible signal detection and broadband analog signal processing. △ Less

Submitted 28 January, 2021; originally announced March 2021.

Comments: 5 pages, 3 figures, 60 references

Journal ref: IEEE Microwave Photonics Conference 2020 Tu1.2

1 Low power continuous-wave nonlinear optics in silica glass integrated waveguide structures

Authors: M. Ferrera, L. Razzari, D. Duchesne, R. Morandotti, Z. Yang, M. Liscidini, J. E. Sipe, S. Chu, B. E. Little, D. J. Moss

Abstract: Photonic integrated circuits (PICs) are a key component [1] for future telecommunication networks, where demands for greater bandwidth, network flexibility, low energy consumption and cost must all be met. The quest for all optical components has naturally targeted materials with extremely large nonlinearity, including chalcogenide glasses (ChG) [2] and semiconductors, such as silicon [3] and AlGa… ▽ More Photonic integrated circuits (PICs) are a key component [1] for future telecommunication networks, where demands for greater bandwidth, network flexibility, low energy consumption and cost must all be met. The quest for all optical components has naturally targeted materials with extremely large nonlinearity, including chalcogenide glasses (ChG) [2] and semiconductors, such as silicon [3] and AlGaAs [4]. Yet issues such as immature fabrication technologies for ChG, and high linear and nonlinear losses for semiconductors, motivate the search for other materials. Here we present the first demonstration of nonlinear optics in integrated silica based glass waveguides using continuous wave (CW) light. We demonstrate four wave mixing (FWM), with low (7mW) CW pump power at a wavelength of 1550nm, in high index doped silica glass ring resonators capable of performing in photonic telecommunications networks as linear filters [5]. The high reliability, design flexibility, and manufacturability of our device raises the possibility of a new platform for future low cost nonlinear all optical PICs. △ Less

Submitted 27 February, 2021; originally announced March 2021.

Comments: 15 pages, 5 figures, 32 references

Journal ref: Nature Photonics, volume 2, page 737 (2008)

Graphene oxide films for ultra-flat optics and linear and nonlinear integrated photonic circuits

Authors: Jiayang Wu, Linnan Jia, Yuning Zhang, Yang Qu, Baohua Jia, David J. Moss

Abstract: With superior optical properties, high flexibility in engineering its material properties, and strong capability for large-scale on-chip integration, graphene oxide (GO) is an attractive solution for on-chip integration of two-dimensional (2D) materials to implement functional integrated photonic devices capable of new features. Over the past decade, integrated GO photonics, representing an innova… ▽ More With superior optical properties, high flexibility in engineering its material properties, and strong capability for large-scale on-chip integration, graphene oxide (GO) is an attractive solution for on-chip integration of two-dimensional (2D) materials to implement functional integrated photonic devices capable of new features. Over the past decade, integrated GO photonics, representing an innovative merging of integrated photonic devices and thin GO films, has experienced significant development, leading to a surge in many applications covering almost every field of optical sciences. This paper reviews the recent advances in this emerging field, providing an overview of the optical properties of GO as well as methods for the on-chip integration of GO. The main achievements made in GO hybrid integrated photonic devices for diverse applications are summarized. The open challenges as well as the potential for future improvement are also discussed. △ Less

Submitted 14 February, 2021; originally announced February 2021.

Comments: 45 pages, 18 figures 211 references

Journal ref: Advanced Materials volume 32 number 2006415, pp.1-29 December (2020)

Theoretical design study of FWM in silicon nitride waveguides with integrated graphene oxide films

Authors: Yang Qu, Jiayang Wu, Yuning Zhang, Linnan Jia, Yao Liang, Baohua Jia, David J. Moss

Abstract: We theoretically investigate and optimize four-wave mixing (FWM) in silicon nitride (SiN) waveguides integrated with two-dimensional (2D) layered graphene oxide (GO) films. Based on extensive previous measurements of the material parameters of the GO films, we perform detailed analysis for the influence of device parameters including waveguide geometry, GO film thickness, length, and coating posit… ▽ More We theoretically investigate and optimize four-wave mixing (FWM) in silicon nitride (SiN) waveguides integrated with two-dimensional (2D) layered graphene oxide (GO) films. Based on extensive previous measurements of the material parameters of the GO films, we perform detailed analysis for the influence of device parameters including waveguide geometry, GO film thickness, length, and coating position on the FWM conversion efficiency (CE) and conversion bandwidth (CB). The influence of dispersion and photo-thermal changes in the GO films is also discussed. Owing to the strong mode overlap between the SiN waveguides and the highly nonlinear GO films, FWM in the hybrid waveguides can be significantly enhanced. We obtain good agreement with previous experimental results and show that by optimizing the device parameters to balance the trade-off between Kerr nonlinearity and loss, the FWM CE can be improved by as much as ~20.7 dBでしべる and the FWM CB can be increased by ~4.4 folds, relative to the uncoated waveguides. These results highlight the significantly enhanced FWM performance that can be achieved in SiN waveguides by integrating 2D layered GO films. △ Less

Submitted 14 February, 2021; originally announced February 2021.

Comments: 8 pages, 8 figures, 52 references

Journal ref: Journal of Lightwave Technology vol.39 Early Access (2021)

Design of Photonic Filters based on Integrated Coupled Sagnac Loop Reflectors

Authors: Hamed Arianfard, Jiayang Wu, Saulius Juodkazis, David J. Moss

Abstract: We theoretically investigate integrated photonic resonators formed by two mutually coupled Sagnac loop reflectors (MC-SLRs). Mode interference in the MC-SLR resonators is tailored to achieve versatile filter shapes with high performance, which enable flexible spectral engineering for diverse applications. By adjusting the reflectivity of the Sagnac loop reflectors (SLRs) as well as the coupling st… ▽ More We theoretically investigate integrated photonic resonators formed by two mutually coupled Sagnac loop reflectors (MC-SLRs). Mode interference in the MC-SLR resonators is tailored to achieve versatile filter shapes with high performance, which enable flexible spectral engineering for diverse applications. By adjusting the reflectivity of the Sagnac loop reflectors (SLRs) as well as the coupling strength between different SLRs, we achieve optical analogues of Fano resonance with ultrahigh spectral slope rates, wavelength interleaving / non-blocking switching functions with significantly enhanced filtering flatness, and compact bandpass filters with improved roll-off. In our designs the requirements for practical applications are considered, together with detailed analyses of the impact of structural parameters and fabrication tolerances. These results highlight the strong potential of MC-SLR resonators as advanced multi-functional integrated photonic filters for flexible spectral engineering in optical communications systems. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Comments: 21 pages, 11 figures, 83 references

Journal ref: Journal of Lightwave Technology Vol 39 (2021)

Soliton crystal Kerr microcombs for high-speed, scalable optical neural networks at 10 GigaOPs/s

Authors: Xingyuan Xu, Mengxi Tan, David J. Moss

Abstract: Optical artificial neural networks (ONNs) have significant potential for ultra-high computing speed and energy efficiency. We report a new approach to ONNs based on integrated Kerr micro-combs that is programmable, highly scalable and capable of reaching ultra-high speeds, demonstrating the building block of the ONN, a single neuron perceptron, by mapping synapses onto 49 wavelengths to achieve a… ▽ More Optical artificial neural networks (ONNs) have significant potential for ultra-high computing speed and energy efficiency. We report a new approach to ONNs based on integrated Kerr micro-combs that is programmable, highly scalable and capable of reaching ultra-high speeds, demonstrating the building block of the ONN, a single neuron perceptron, by mapping synapses onto 49 wavelengths to achieve a single-unit throughput of 11.9 Giga-OPS at 8 bits per OP, or 95.2 Gbps. We test the perceptron on handwritten-digit recognition and cancer-cell detection, achieving over 90% and 85% accuracy, respectively. By scaling the perceptron to a deep learning network using off the shelf telecom technology we can achieve high throughput operation for matrix multiplication for real-time massive data processing. △ Less

Submitted 28 January, 2021; originally announced January 2021.

Comments: 6 pages, 3 figures, 96 References

Journal ref: IEEE Microwave Photonics Conf 2020 paper P.26

11 TeraFLOPs per second photonic convolutional accelerator for deep learning optical neural networks

Authors: Xingyuan Xu, Mengxi Tan, Bill Corcoran, Jiayang Wu, Andreas Boes, Thach G. Nguyen, Sai T. Chu, Brent E. Little, Damien G. Hicks, Roberto Morandotti, Arnan Mitchell, David J. Moss

Abstract: Convolutional neural networks (CNNs), inspired by biological visual cortex systems, are a powerful category of artificial neural networks that can extract the hierarchical features of raw data to greatly reduce the network parametric complexity and enhance the predicting accuracy. They are of significant interest for machine learning tasks such as computer vision, speech recognition, playing board… ▽ More Convolutional neural networks (CNNs), inspired by biological visual cortex systems, are a powerful category of artificial neural networks that can extract the hierarchical features of raw data to greatly reduce the network parametric complexity and enhance the predicting accuracy. They are of significant interest for machine learning tasks such as computer vision, speech recognition, playing board games and medical diagnosis. Optical neural networks offer the promise of dramatically accelerating computing speed to overcome the inherent bandwidth bottleneck of electronics. Here, we demonstrate a universal optical vector convolutional accelerator operating beyond 10 TeraFLOPS (floating point operations per second), generating convolutions of images of 250,000 pixels with 8 bit resolution for 10 kernels simultaneously, enough for facial image recognition. We then use the same hardware to sequentially form a deep optical CNN with ten output neurons, achieving successful recognition of full 10 digits with 900 pixel handwritten digit images with 88% accuracy. Our results are based on simultaneously interleaving temporal, wavelength and spatial dimensions enabled by an integrated microcomb source. This approach is scalable and trainable to much more complex networks for demanding applications such as unmanned vehicle and real-time video recognition. △ Less

Submitted 14 November, 2020; originally announced November 2020.

Comments: 21 pages, 9 figures, 39 references

Journal ref: Nature, Volume 589 Issue 7840. pages 44-51 (2021)

Reconfigurable photonic RF filters based on integrated Kerr frequency comb sources

Authors: Xingyuan Xu, Mengxi Tan, Jiayang Wu, Thach G. Nguyen, Sai T. Chu, Brent E. Little, Roberto Morandotti, Arnan Mitchell, David J. Moss

Abstract: We demonstrate two categories of photonic radio frequency (RF) filters based on integrated optical micro-combs. The first one is based on the transversal filtering structure and the second one is based on the channelization technique. The large number of wavelengths brought about by the microcomb results in a significantly increased RF spectral resolution and a large instantaneous bandwidth for th… ▽ More We demonstrate two categories of photonic radio frequency (RF) filters based on integrated optical micro-combs. The first one is based on the transversal filtering structure and the second one is based on the channelization technique. The large number of wavelengths brought about by the microcomb results in a significantly increased RF spectral resolution and a large instantaneous bandwidth for the RF filters. For the RF transversal filter, we demonstrated Q factor enhancement, improved out-of-band rejection, tunable centre frequency, and reconfigurable filtering shapes. While a high resolution of 117 MHz, a large RF instantaneous bandwidth of 4.64 GHz, and programmable RF transfer functions including binary-coded notch filters and RF equalizing filters with reconfigurable slopes are demonstrated for the RF channelized filter. The microcomb-based approaches feature a potentially much smaller cost and footprint, and is promising for integrated photonic RF filters. △ Less

Submitted 25 August, 2020; originally announced August 2020.

Comments: 4 pages, 5 figures, 32 references. arXiv admin note: substantial text overlap with arXiv:1903.08541

Journal ref: IEEE Topical Meeting on Microwave Photonics, Ottawa, Oct. 2019