-
Ultrahigh-speed thin-film lithium niobate optical coherent receiver
Authors:
Xiaojun Xie,
Chao Wei,
Xingchen He,
Yake Chen,
Chenghao Wang,
Jihui Sun,
Lin Jiang,
Jia Ye,
Xihua Zou,
Wei Pan,
Lianshan Yan
Abstract:
The rapid advancement of the thin-film lithium niobate platform has established it as a premier choice for high-performance photonics integration. High-speed optical coherent receivers are essential for supporting the large communication capacities required by data center interconnects. Although high-speed photodiodes have been demonstrated on the thin-film LiNbO3 platform, the development of an u…
▽ More
The rapid advancement of the thin-film lithium niobate platform has established it as a premier choice for high-performance photonics integration. High-speed optical coherent receivers are essential for supporting the large communication capacities required by data center interconnects. Although high-speed photodiodes have been demonstrated on the thin-film LiNbO3 platform, the development of an ultrahigh-speed optical coherent receiver on this platform has not yet been realized. Here, we propose and experimentally demonstrate an ultra-wideband PD and ultrahigh-speed optical coherent receiver on an InP-LiNbO3 wafer-level heterogeneous integration platform. The fabricated single PD exhibits a record-high bandwidth of 140 GHz and successfully receives a high-quality 100-Gbaud pulse amplitude modulation (PAM4) signal. Furthermore, a thin-film LiNbO3 optical coherent receiver, featuring a large balanced detection bandwidth of 60 GHz, a large common mode rejection ratio (CMRR) exceeding 20 dB, and a low energy consumption of 9.6 fJ per bit, enables an ultrahigh-speed coherent reception with advanced modulation formats. The single-polarization I-Q coherent receiver, incorporating a compact 2x4 90 optical hybrid and a balanced photodetector array, achieves a receiving capacity of 600 Gbps per channel with 100-Gbaud 64 quadrature amplitude modulation (QAM) signal and 512 Gbps per channel with 128-Gbaud 16 QAM signal. Additionally, we demonstrate a long-distance reception of 100 Gbaud quadrature phase-shift keying (QPSK) and 16 QAM signals over transmission distances of 1040 km and 25 km. A seven-channel single-polarization I-Q coherent receiving chip achieves a total receiving capacity of 3.584 Tbps. This heterogeneous-integrated thin-film LiNbO3 optical coherent receiver shows the potential for Pbps-scale applications in future hyperscale data center interconnects.
△ Less
Submitted 5 August, 2024;
originally announced August 2024.
-
Type-II Apollonian Model
Authors:
Fei Ma,
Jinzhi Ouyang,
Ping Wang,
Haobin Shi,
Wei Pan
Abstract:
The family of planar graphs is a particularly important family and models many real-world networks. In this paper, we propose a principled framework based on the widely-known Apollonian packing process to generate new planar network, i.e., Type-II Apollonian network $\mathcal{A}_{t}$. The manipulation is different from that of the typical Apollonian network, and is proceeded in terms of the iterat…
▽ More
The family of planar graphs is a particularly important family and models many real-world networks. In this paper, we propose a principled framework based on the widely-known Apollonian packing process to generate new planar network, i.e., Type-II Apollonian network $\mathcal{A}_{t}$. The manipulation is different from that of the typical Apollonian network, and is proceeded in terms of the iterative addition of triangle instead of vertex. As a consequence, network $\mathcal{A}_{t}$ turns out to be hamiltonian and eulerian, however, the typical Apollonian network is not. Then, we in-depth study some fundamental structural properties on network $\mathcal{A}_{t}$, and verify that network $\mathcal{A}_{t}$ is sparse like most real-world networks, has scale-free feature and small-world property, and exhibits disassortative mixing structure. Next, we design an effective algorithm for solving the problem of how to enumerate spanning trees on network $\mathcal{A}_{t}$, and derive the asymptotic solution of the spanning tree entropy, which suggests that Type-II Apollonian network is more reliable to a random removal of edges than the typical Apollonian network. Additionally, we study trapping problem on network $\mathcal{A}_{t}$, and use average trapping time as metric to show that Type-II Apollonian network $\mathcal{A}_{t}$ has better structure for fast information diffusion than the typical Apollonian network.
△ Less
Submitted 23 December, 2023;
originally announced December 2023.
-
High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule
Authors:
Jiyuan Zhai,
Weimin Pan,
Feisi He,
Rui Ge,
Zhenghui Mi,
Peng Sha,
Song Jin,
Ruixiong Han,
Qunyao Wang,
Haiying Lin,
Guangwei Wang,
Mei Li,
Minjing Sang,
Liangrui Sun,
Rui Ye,
Tongxian Zhao,
Shaopeng Li,
Keyu Zhu,
Baiqi Liu,
Xiaolong Wang,
Xiangchen Yang,
Xiaojuan Bian,
Xiangzhen Zhang,
Huizhou Ma,
Xuwen Dai
, et al. (14 additional authors not shown)
Abstract:
World's first 1.3 GHz cryomodule containing eight 9-cell superconducting radio-frequency (RF) cavities treated by medium-temperature furnace baking (mid-T bake) was developed, assembled and tested at IHEP for the Dalian Advanced Light Source (DALS) and CEPC R&D. The 9-cell cavities in the cryomodule achieved an unprecedented highest average Q0 of 3.8E10 at 16 MV/m and 3.6E10 at 21 MV/m in the hori…
▽ More
World's first 1.3 GHz cryomodule containing eight 9-cell superconducting radio-frequency (RF) cavities treated by medium-temperature furnace baking (mid-T bake) was developed, assembled and tested at IHEP for the Dalian Advanced Light Source (DALS) and CEPC R&D. The 9-cell cavities in the cryomodule achieved an unprecedented highest average Q0 of 3.8E10 at 16 MV/m and 3.6E10 at 21 MV/m in the horizontal test. The cryomodule can operate stably up to a total CW RF voltage greater than 191 MV, with an average cavity CW accelerating gradient of more than 23 MV/m. The results significantly exceed the specifications of CEPC, DALS and the other high repetition rate free electron laser facilities (LCLS-II, LCLS-II-HE, SHINE, S3FEL). There is evidence that the mid-T bake cavity may not require fast cool-down or long processing time in the cryomodule. This paper reviews the cryomodule performance and discusses some important issues in cryomodule assembly and testing.
△ Less
Submitted 2 December, 2023;
originally announced December 2023.
-
The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite
Authors:
Z. X. Ling,
X. J. Sun,
C. Zhang,
S. L. Sun,
G. Jin,
S. N. Zhang,
X. F. Zhang,
J. B. Chang,
F. S. Chen,
Y. F. Chen,
Z. W. Cheng,
W. Fu,
Y. X. Han,
H. Li,
J. F. Li,
Y. Li,
Z. D. Li,
P. R. Liu,
Y. H. Lv,
X. H. Ma,
Y. J. Tang,
C. B. Wang,
R. J. Xie,
Y. L. Xue,
A. L. Yan
, et al. (101 additional authors not shown)
Abstract:
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo…
▽ More
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
First Scan Search for Dark Photon Dark Matter with a Tunable Superconducting Radio-Frequency Cavity
Authors:
SHANHE Collaboration,
Zhenxing Tang,
Bo Wang,
Yifan Chen,
Yanjie Zeng,
Chunlong Li,
Yuting Yang,
Liwen Feng,
Peng Sha,
Zhenghui Mi,
Weimin Pan,
Tianzong Zhang,
Yirong Jin,
Jiankui Hao,
Lin Lin,
Fang Wang,
Huamu Xie,
Senlin Huang,
Jing Shu
Abstract:
Dark photons have emerged as promising candidates for dark matter, and their search is a top priority in particle physics, astrophysics, and cosmology. We report the first use of a tunable niobium superconducting radio-frequency cavity for a scan search of dark photon dark matter with innovative data analysis techniques. We mechanically adjusted the resonant frequency of a cavity submerged in liqu…
▽ More
Dark photons have emerged as promising candidates for dark matter, and their search is a top priority in particle physics, astrophysics, and cosmology. We report the first use of a tunable niobium superconducting radio-frequency cavity for a scan search of dark photon dark matter with innovative data analysis techniques. We mechanically adjusted the resonant frequency of a cavity submerged in liquid helium at a temperature of $2$ K, and scanned the dark photon mass over a frequency range of $1.37$ MHz centered at $1.3$ GHz. Our study leveraged the superconducting radio-frequency cavity's remarkably high quality factors of approximately $10^{10}$, resulting in the most stringent constraints to date on a substantial portion of the exclusion parameter space on the kinetic mixing coefficient $ε$ between dark photons and electromagnetic photons, yielding a value of $ε< 2.2 \times 10^{-16}$.
△ Less
Submitted 13 July, 2024; v1 submitted 16 May, 2023;
originally announced May 2023.
-
Ultra-wideband Waveguide-coupled Photodiodes Heterogeneously Integrated on a Thin-film Lithium Niobate Platform
Authors:
Chao Wei,
Youren Yu,
Ziyun Wang,
Lin Jiang,
Zhongming Zeng,
Jia Ye,
Xihua Zou,
Wei Pan,
Xiaojun Xie,
Lianshan Yan
Abstract:
With the advantages of large electro-optical coefficient, wide transparency window, and strong optical confinement, thin-film lithium niobate (TFLN) technique has enabled the development of various high-performance optoelectronics devices, ranging from the ultra-wideband electro-optic modulators to the high-efficient quantum sources. However, the TFLN platform does not natively promise lasers and…
▽ More
With the advantages of large electro-optical coefficient, wide transparency window, and strong optical confinement, thin-film lithium niobate (TFLN) technique has enabled the development of various high-performance optoelectronics devices, ranging from the ultra-wideband electro-optic modulators to the high-efficient quantum sources. However, the TFLN platform does not natively promise lasers and photodiodes. This study presents an InP/InGaAs modified uni-traveling carrier (MUTC) photodiodes heterogeneously integrated on the TFLN platform with a record-high 3-dB bandwidth of 110 GHz and a responsivity of 0.4 A/W at a 1550-nm wavelength. It is implemented on a wafer-level TFLN-InP heterogeneous integration platform and is suitable for the large-scale, multi-function, and high-performance TFLN photonic integrated circuits.
△ Less
Submitted 1 July, 2023; v1 submitted 13 May, 2023;
originally announced May 2023.
-
Millimeter-level Resolution Photonic Multiband Radar Using a Single MZM and Sub-GHz-Bandwidth Electronics
Authors:
Peixuan Li,
Wenlin Bai,
Xihua Zou,
Ningyuan Zhong,
Wei Pan,
Lianshan Yan
Abstract:
We here propose a novel cost-effective millimeter-level resolution photonic multiband radar system using a single MZM driven by a 1-GHz-bandwidth LFM signal. It experimentally shows an ~8.5-mm range resolution through coherence-processing-free multiband data fusion.
We here propose a novel cost-effective millimeter-level resolution photonic multiband radar system using a single MZM driven by a 1-GHz-bandwidth LFM signal. It experimentally shows an ~8.5-mm range resolution through coherence-processing-free multiband data fusion.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Fast Simulation of Particulate Suspensions Enabled by Graph Neural Network
Authors:
Zhan Ma,
Zisheng Ye,
Wenxiao Pan
Abstract:
Predicting the dynamic behaviors of particles in suspension subject to hydrodynamic interaction (HI) and external drive can be critical for many applications. By harvesting advanced deep learning techniques, the present work introduces a new framework, hydrodynamic interaction graph neural network (HIGNN), for inferring and predicting the particles' dynamics in Stokes suspensions. It overcomes the…
▽ More
Predicting the dynamic behaviors of particles in suspension subject to hydrodynamic interaction (HI) and external drive can be critical for many applications. By harvesting advanced deep learning techniques, the present work introduces a new framework, hydrodynamic interaction graph neural network (HIGNN), for inferring and predicting the particles' dynamics in Stokes suspensions. It overcomes the limitations of traditional approaches in computational efficiency, accuracy, and/or transferability. In particular, by uniting the data structure represented by a graph and the neural networks with learnable parameters, the HIGNN constructs surrogate modeling for the mobility tensor of particles which is the key to predicting the dynamics of particles subject to HI and external forces. To account for the many-body nature of HI, we generalize the state-of-the-art GNN by introducing higher-order connectivity into the graph and the corresponding convolutional operation. For training the HIGNN, we only need the data for a small number of particles in the domain of interest, and hence the training cost can be maintained low. Once constructed, the HIGNN permits fast predictions of the particles' velocities and is transferable to suspensions of different numbers/concentrations of particles in the same domain and to any external forcing. It has the ability to accurately capture both the long-range HI and short-range lubrication effects. We demonstrate the accuracy, efficiency, and transferability of the proposed HIGNN framework in a variety of systems. The requirement on computing resource is minimum: most simulations only require a desktop with one GPU; the simulations for a large suspension of 100,000 particles call for up to 6 GPUs.
△ Less
Submitted 17 June, 2022;
originally announced June 2022.
-
Ultra-High-Precision Detection of Single Microwave Photons based on a Hybrid System between Majorana Zero Mode and a Quantum Dot
Authors:
Eric Chatterjee,
Wei Pan,
Daniel Soh
Abstract:
The ability to detect single photons has become increasingly essential due to the rise of photon-based quantum computing. In this theoretical work, we propose a system consisting of a quantum dot (QD) side-coupled to a superconducting nanowire. The coupling opens a gap in both the QD mode and the Majorana zero mode (MZM) at the nanowire edge, enabling photon absorption in the system. We show that…
▽ More
The ability to detect single photons has become increasingly essential due to the rise of photon-based quantum computing. In this theoretical work, we propose a system consisting of a quantum dot (QD) side-coupled to a superconducting nanowire. The coupling opens a gap in both the QD mode and the Majorana zero mode (MZM) at the nanowire edge, enabling photon absorption in the system. We show that the absorbed photoelectron decays via rapid (sub-nanosecond to nanosecond) nonradiative heat transfer to the nanowire phonon modes rather than by spontaneous emission. Furthermore, we calculate the temperature increase and associated resistance increase induced by the absorption of a photon for a given appropriate set of material and environmental parameters, yielding a temperature increase in the millikelvin range and a resistance increase in the kiloohm range, vastly exceeding the photon-absorption-induced temperature and resistance increases for competing 2D-3D hybrid systems by 5 and 9 orders of magnitude, respectively. Lastly, we determine the detector efficiency and discuss the system density required for deterministic photon number measurement, demonstrating that a photon absorption probability of over 99.9 percent can be achieved for an integrated system consisting of an array of nanowire-QD complexes on-chip inside a cavity. Our results thus provide a basis for a deterministic microwave photon number detector with an unprecedented photon-number-detection resolution.
△ Less
Submitted 3 January, 2023; v1 submitted 13 June, 2022;
originally announced June 2022.
-
Deterministic and Stochastic Euler-Boussinesq Convection
Authors:
Darryl D. Holm,
Wei Pan
Abstract:
Stochastic parametrisations of the interactions among disparate scales of motion in fluid convection are often used for estimating prediction uncertainty, which can arise due to inadequate model resolution, or incomplete observations, especially in dealing with atmosphere and ocean dynamics, where viscous and diffusive dissipation effects are negligible. This paper derives a family of three differ…
▽ More
Stochastic parametrisations of the interactions among disparate scales of motion in fluid convection are often used for estimating prediction uncertainty, which can arise due to inadequate model resolution, or incomplete observations, especially in dealing with atmosphere and ocean dynamics, where viscous and diffusive dissipation effects are negligible. This paper derives a family of three different types of stochastic parameterisations for the classical Euler-Boussinesq (EBC) equations for a buoyant incompressible fluid flowing under gravity in a vertical plane. These three stochastic models are inspired by earlier work on the effects of stochastic fluctuations on transport, see, e.g., Kraichnan [1968, 1994] and Doering et al. [1994]. They are derived here from variants of Hamilton's principle for the deterministic case when Stratonovich noise is introduced. The three models possess different variants of their corresponding Hamiltonian structures. One variant (SALT) introduces stochastic transport. Another variant (SFLT) introduces stochastic \emph{forcing}, rather than stochastic \emph{transport}. The third variant (LA SALT) introduces nonlocality in its stochastic transport, in the probabilistic sense of McKean [1966].
△ Less
Submitted 19 May, 2022;
originally announced May 2022.
-
A Multigrid Preconditioner for Spatially Adaptive High-order Meshless Method on Fluid-solid Interaction Problems
Authors:
Zisheng Ye,
Xiaozhe Hu,
Wenxiao Pan
Abstract:
We present a monolithic geometric multigrid preconditioner for solving fluid-solid interaction problems in Stokes limit. The problems are discretized by a spatially adaptive high-order meshless method, the generalized moving least squares (GMLS) with adaptive $h$-refinement. In Stokes limit, solid kinematics can be dominated by the singularities governing the lubrication effects. Resolving those s…
▽ More
We present a monolithic geometric multigrid preconditioner for solving fluid-solid interaction problems in Stokes limit. The problems are discretized by a spatially adaptive high-order meshless method, the generalized moving least squares (GMLS) with adaptive $h$-refinement. In Stokes limit, solid kinematics can be dominated by the singularities governing the lubrication effects. Resolving those singularities with adaptive $h$-refinement can lead to an ill-conditioned linear system of equations. For constructing the interpolation and restriction operators - the key ingredients of the multigrid preconditioner, we utilize the geometric information of hierarchical sets of GMLS nodes generated in adaptive $h$-refinement. We build decoupled smoothers through physics-based splitting and then combine them via a multiplicative overlapping Schwarz approach. Through numerical examples with the inclusion of different numbers and shapes of solid bodies, we demonstrate the performance and assess the scalability of the designed preconditioner. As the total degrees of freedom and the number of solid bodies $N_s$ increase, the proposed monolithic geometric multigrid preconditioner can ensure convergence and good scalability when using the Krylov iterative method for solving the linear systems of equations generated from the spatially adaptive GMLS discretization. More specifically, for a fixed number of solid bodies, as the discretization resolution is incrementally refined, the number of iterations of the linear solver can be maintained at the same level, indicating nearly linear scalability of our preconditioner with respect to the total degrees of freedom. When $N_s$ increases, the number of iterations is nearly proportional to $\sqrt{N_s}$, implying the sublinear optimality with respect to the number of solid bodies.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
Reciprocal phase transition-enabled electro-optic modulation
Authors:
Fang Zou,
Lei Zou,
Ye Tian,
Yiming Zhang,
Erwin Bente,
Weigang Hou,
Yu Liu,
Siming Chen,
Victoria Cao,
Lei Guo,
Songsui Li,
Lianshan Yan,
Wei Pan,
Dusan Milosevic,
Zizheng Cao,
A. M. J. Koonen,
Huiyun Liu,
Xihua Zou
Abstract:
Electro-optic (EO) modulation is a well-known and essential topic in the field of communications and sensing. Its ultrahigh efficiency is unprecedentedly desired in the current green and data era. However, dramatically increasing the modulation efficiency is difficult due to the monotonic mapping relationship between the electrical signal and modulated optical signal. Here, a new mechanism termed…
▽ More
Electro-optic (EO) modulation is a well-known and essential topic in the field of communications and sensing. Its ultrahigh efficiency is unprecedentedly desired in the current green and data era. However, dramatically increasing the modulation efficiency is difficult due to the monotonic mapping relationship between the electrical signal and modulated optical signal. Here, a new mechanism termed phase-transition EO modulation is revealed from the reciprocal transition between two distinct phase planes arising from the bifurcation. Remarkably, a monolithically integrated mode-locked laser (MLL) is implemented as a prototype. A 24.8-GHz radio-frequency signal is generated and modulated, achieving a modulation energy efficiency of 3.06 fJ/bit improved by about four orders of magnitude and a contrast ratio exceeding 50 dB. Thus, MLL-based phase-transition EO modulation is characterised by ultrahigh modulation efficiency and ultrahigh contrast ratio, as experimentally proved in radio-over-fibre and underwater acoustic-sensing systems. This phase-transition EO modulation opens a new avenue for green communication and ubiquitous connections.
△ Less
Submitted 22 November, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Efficient World-line-based Quantum Monte Carlo Method Without Hubbard-Stratonovich Transformation
Authors:
J. Wang,
W. Pan,
D. Y. Sun
Abstract:
By precisely writing down the matrix element of the local Boltzmann operator, we have proposed a new path integral formulation for quantum field theory and developed a corresponding Monte Carlo algorithm. With current formula, the Hubbard-Stratonovich transformation is not necessary, and is not based on the determinant approach, which can improve the computational efficiency. The results show that…
▽ More
By precisely writing down the matrix element of the local Boltzmann operator, we have proposed a new path integral formulation for quantum field theory and developed a corresponding Monte Carlo algorithm. With current formula, the Hubbard-Stratonovich transformation is not necessary, and is not based on the determinant approach, which can improve the computational efficiency. The results show that, the simulation time has the square-law scaling with system sizes, which is comparable with the usual first-principle calculation. The current formula also improves the accuracy of the Suzuki-Trotter decomposition. As an example, we have studied the one-dimensional half-filled Hubbard model at finite temperature. The obtained results are in excellent agreement with the known solutions. The new formula and Monte Carlo algorithm can be used in various studies.
△ Less
Submitted 3 March, 2022; v1 submitted 17 October, 2021;
originally announced October 2021.
-
Parasitic modes suppression in CW cold tests of 1.3 GHz 9-cell high Q cavities at IHEP
Authors:
Zhenghui Mi,
Feisi He,
Weimin Pan,
Peng Sha,
Jiyuan Zhai,
Xuwen Dai,
Song Jina,
Zhanjun Zhang,
Chao Dong,
Baiqi Liu,
Hui Zhao,
Rui Gea,
Jianbing Zhao,
Zhihui Mu,
Lei Du,
Liangrui Sun,
Liang Zhang,
Conglai Yang,
Xiaobing Zheng,
Haiying Lin,
Guangwei Wang,
Xiangcong He
Abstract:
The CW RF test of 1.3 GHz 9-cell cavity in liquid helium bath at 2 K is a very important key point in the cavity procurement. Some problems can be found through the test, according which to optimized and improve the process of cavity. Recently, Medium temperature (mid-T) furnace bake of 1.3 GHz 9-cell cavities have been carried out at IHEP. Through the proceed of mid-T bake, the quality factor of…
▽ More
The CW RF test of 1.3 GHz 9-cell cavity in liquid helium bath at 2 K is a very important key point in the cavity procurement. Some problems can be found through the test, according which to optimized and improve the process of cavity. Recently, Medium temperature (mid-T) furnace bake of 1.3 GHz 9-cell cavities have been carried out at IHEP. Through the proceed of mid-T bake, the quality factor of cavity has been greatly improved. While the excitation of the parasitic modes in the high Q cavities CW cold test has been encountered, which implies an error source for the cavity gradient and quality factor determination. In order to ensure the testing accuracy of superconducting cavity, we have improved the testing system. Finally, the parasitic mode is completely suppressed and the CW RF cold test of high Q cavity is guaranteed.
△ Less
Submitted 26 March, 2021;
originally announced March 2021.
-
Transfer Learning of Memory Kernels in Coarse-grained Modeling
Authors:
Zhan Ma,
Shu Wang,
Minhee Kim,
Kaibo Liu,
Chun-Long Chen,
Wenxiao Pan
Abstract:
The present work concerns the transferability of coarse-grained (CG) modeling in reproducing the dynamic properties of the reference atomistic systems across a range of parameters. In particular, we focus on implicit-solvent CG modeling of polymer solutions. The CG model is based on the generalized Langevin equation, where the memory kernel plays the critical role in determining the dynamics in al…
▽ More
The present work concerns the transferability of coarse-grained (CG) modeling in reproducing the dynamic properties of the reference atomistic systems across a range of parameters. In particular, we focus on implicit-solvent CG modeling of polymer solutions. The CG model is based on the generalized Langevin equation, where the memory kernel plays the critical role in determining the dynamics in all time scales. Thus, we propose methods for transfer learning of memory kernels. The key ingredient of our methods is Gaussian process regression. By integration with the model order reduction via proper orthogonal decomposition and the active learning technique, the transfer learning can be practically efficient and requires minimum training data. Through two example polymer solution systems, we demonstrate the accuracy and efficiency of the proposed transfer learning methods in the construction of transferable memory kernels. The transferability allows for out-of-sample predictions, even in the extrapolated domain of parameters. Built on the transferable memory kernels, the CG models can reproduce the dynamic properties of polymers in all time scales at different thermodynamic conditions (such as temperature and solvent viscosity) and for different systems with varying concentrations and lengths of polymers.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
Data-driven Coarse-grained Modeling of Non-equilibrium Systems
Authors:
Shu Wang,
Zhan Ma,
Wenxiao Pan
Abstract:
Modeling a high-dimensional Hamiltonian system in reduced dimensions with respect to coarse-grained (CG) variables can greatly reduce computational cost and enable efficient bottom-up prediction of main features of the system for many applications. However, it usually experiences significantly altered dynamics due to loss of degrees of freedom upon coarse-graining. To establish CG models that can…
▽ More
Modeling a high-dimensional Hamiltonian system in reduced dimensions with respect to coarse-grained (CG) variables can greatly reduce computational cost and enable efficient bottom-up prediction of main features of the system for many applications. However, it usually experiences significantly altered dynamics due to loss of degrees of freedom upon coarse-graining. To establish CG models that can faithfully preserve dynamics, previous efforts mainly focused on equilibrium systems. In contrast, various soft matter systems are known out of equilibrium. Therefore, the present work concerns non-equilibrium systems and enables accurate and efficient CG modeling that preserves non-equilibrium dynamics and is generally applicable to any non-equilibrium process and any observable of interest. To this end, the dynamic equation of a CG variable is built in the form of the non-stationary generalized Langevin equation (nsGLE) to account for the dependence of non-equilibrium processes on the initial conditions, where the two-time memory kernel is determined from the data of the two-time auto-correlation function of the non-equilibrium trajectory-averaged observable of interest. By embedding the non-stationary non-Markovian process in an extended stochastic framework, an explicit form of the non-stationary random noise in the nsGLE is introduced, and the cost is significantly reduced for solving the nsGLE to predict the non-equilibrium dynamics of the CG variable. To prove and exploit the equivalence of the nsGLE and extended dynamics, the memory kernel is parameterized in a two-time exponential expansion. A data-driven hybrid optimization process is proposed for the parameterization, a non-convex and high-dimensional optimization problem.
△ Less
Submitted 8 April, 2021; v1 submitted 18 March, 2021;
originally announced March 2021.
-
Computationally Efficient Multiscale Neural Networks Applied To Fluid Flow In Complex 3D Porous Media
Authors:
Javier Santos,
Ying Yin,
Honggeun Jo,
Wen Pan,
Qinjun Kang,
Hari Viswanathan,
Masa Prodanovic,
Michael Pyrcz,
Nicholas Lubbers
Abstract:
The permeability of complex porous materials can be obtained via direct flow simulation, which provides the most accurate results, but is very computationally expensive. In particular, the simulation convergence time scales poorly as simulation domains become tighter or more heterogeneous. Semi-analytical models that rely on averaged structural properties (i.e. porosity and tortuosity) have been p…
▽ More
The permeability of complex porous materials can be obtained via direct flow simulation, which provides the most accurate results, but is very computationally expensive. In particular, the simulation convergence time scales poorly as simulation domains become tighter or more heterogeneous. Semi-analytical models that rely on averaged structural properties (i.e. porosity and tortuosity) have been proposed, but these features only summarize the domain, resulting in limited applicability. On the other hand, data-driven machine learning approaches have shown great promise for building more general models by virtue of accounting for the spatial arrangement of the domains solid boundaries. However, prior approaches building on the Convolutional Neural Network (ConvNet) literature concerning 2D image recognition problems do not scale well to the large 3D domains required to obtain a Representative Elementary Volume (REV). As such, most prior work focused on homogeneous samples, where a small REV entails that that the global nature of fluid flow could be mostly neglected, and accordingly, the memory bottleneck of addressing 3D domains with ConvNets was side-stepped. Therefore, important geometries such as fractures and vuggy domains could not be well-modeled. In this work, we address this limitation with a general multiscale deep learning model that is able to learn from porous media simulation data. By using a coupled set of neural networks that view the domain on different scales, we enable the evaluation of large images in approximately one second on a single Graphics Processing Unit. This model architecture opens up the possibility of modeling domain sizes that would not be feasible using traditional direct simulation tools on a desktop computer.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Medium-temperature furnace bake of Superconducting Radio-Frequency cavities at IHEP
Authors:
Feisi He,
Weimin Pan,
Peng Sha,
Jiyuan Zhai,
Zhenghui Mi,
Xuwen Dai,
Song Jin,
Zhanjun Zhang,
Chao Dong,
Baiqi Liu,
Hui Zhao,
Rui Ge,
Jianbing Zhao,
Zhihui Mu,
Lei Du,
Liangrui Sun,
Liang Zhang,
Conglai Yang,
Xiaobing Zheng
Abstract:
Recently, heat treatment between 250 C and 500 C has been attempted to improve quality factor of superconducting radio-frequency cavities at FNAL and KEK. Experiments of such medium temperature (mid-T) bake with furnaces have also been carried out at IHEP. Firstly, eleven 1.3 GHz 1-cell cavities were treated with different temperatures at a small furnace. The average quality factor has reached 3.6…
▽ More
Recently, heat treatment between 250 C and 500 C has been attempted to improve quality factor of superconducting radio-frequency cavities at FNAL and KEK. Experiments of such medium temperature (mid-T) bake with furnaces have also been carried out at IHEP. Firstly, eleven 1.3 GHz 1-cell cavities were treated with different temperatures at a small furnace. The average quality factor has reached 3.6E10 when the gradient is 16 MV/m. Then, the recipe of mid-T furnace bake at 300 C for 3 hours has been applied to six 1.3 GHz 9-cell cavities at a new big furnace. The average quality factor has reached 3.8E10 when the gradient is 16 MV/m.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
STSIR: Spatial Temporal Pandemic Model with Mobility Data
Authors:
Wang Pan,
Qipu Deng,
Jiadong Li,
Zhi Wang,
Wenwu Zhu
Abstract:
With the outbreak of COVID-19, how to mitigate and suppress its spread is a big issue to the government. Department of public health need powerful models to model and predict the trend and scale of such pandemic. And models that could evaluate the effect of the public policy are also essential to the fight with the COVID-19. A main limitation of existing models is that they can only evaluate the p…
▽ More
With the outbreak of COVID-19, how to mitigate and suppress its spread is a big issue to the government. Department of public health need powerful models to model and predict the trend and scale of such pandemic. And models that could evaluate the effect of the public policy are also essential to the fight with the COVID-19. A main limitation of existing models is that they can only evaluate the policy by calculating $R_0$ after infection happens instead of giving observable index. To tackle this, based on the transmission character of the COVID-19, we preposed a novel framework Spatial-Temporal-Susceptible-Infected-Removed (STSIR) model. In particular, we merged both intra-city and inter-city mobility index with the traditional SIR dynamics and make it a dynamic system. And we proved that the STSIR system is a closed system which makes the system self-consistent. And finally we proposed a Multi-Stage Simulated Annealing (MSSA) algorithm to find optimal parameter of the system. In our experiments, based on Baidu Mobility dataset, and China pandemic dataset provided by Dingxiangyuan, our model can effectively predict the total scale of the pandemic and also gives clear policy analysis with observable index.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
Microwave Photon Number Resolving Detector Using the Topological Surface State of Superconducting Cadmium Arsenide
Authors:
Eric Chatterjee,
Wei Pan,
Daniel Soh
Abstract:
Photon number resolving detectors play a central role in quantum optics. A key challenge in resolving the number of absorbed photons in the microwave frequency range is finding a suitable material that provides not only an appropriate band structure for absorbing low-energy photons but also a means of detecting a discrete photoelectron excitation. To this end, we propose to measure the temperature…
▽ More
Photon number resolving detectors play a central role in quantum optics. A key challenge in resolving the number of absorbed photons in the microwave frequency range is finding a suitable material that provides not only an appropriate band structure for absorbing low-energy photons but also a means of detecting a discrete photoelectron excitation. To this end, we propose to measure the temperature gain after absorbing a photon using superconducting cadmium arsenide (Cd3As2) with a topological semimetallic surface state as the detector. The surface electrons absorb the incoming photons and then transfer the excess energy via heat to the superconducting bulk's phonon modes. The temperature gain can be determined by measuring the change in the zero-bias bulk resistivity, which does not significantly affect the lattice dynamics. Moreover, the obtained temperature gain scales discretely with the number of absorbed photons, enabling a photon-number resolving function. Here, we will calculate the temperature increase as a function of the number and frequency of photons absorbed. We will also derive the timescale for the heat transfer process from the surface electrons to the bulk phonons. We will specifically show that the transfer processes are fast enough to ignore heat dissipation loss.
△ Less
Submitted 17 April, 2021; v1 submitted 4 September, 2020;
originally announced September 2020.
-
Photo-excitation production of medically interesting isomers using high-intensity γ-ray source
Authors:
Wan-ting Pan,
Hao-yang Lan,
Zhi-guo Ma,
Zhi-chao Zhu,
Wen Luo
Abstract:
Photon-induced nuclear excitation (i.e. photo-excitation) can be used for production of nuclear isomers, which have potential applications in astrophysics, energy storing, and medical diagnosis and treatment. This paper presents a feasibility study on production of four nuclear isomers ({99m}^Tc, {103m}^Rh and {113m, 115m}^In) using high-intensity γ-ray source based on laser-electron Compton scatt…
▽ More
Photon-induced nuclear excitation (i.e. photo-excitation) can be used for production of nuclear isomers, which have potential applications in astrophysics, energy storing, and medical diagnosis and treatment. This paper presents a feasibility study on production of four nuclear isomers ({99m}^Tc, {103m}^Rh and {113m, 115m}^In) using high-intensity γ-ray source based on laser-electron Compton scattering (LCS), for use in the medical diagnosis and treatment. The decay properties and the medical applications of these nuclear isomers were reviewed. The cross-section curves, simulated yields and activity of product of each photo-excitation process were calculated. The cutoff energy of LCS γ-ray beam is optimized by adjusting the electron energy in order to maximize the yields as well as the activities of photo-excitation products. It is found that the achievable activity of above-mentioned isomers can exceed 10 mCi for 6-hour target irradiation at an intensity of the order of 10^{13} γ/s. Such magnitude of activity satisfies the dose requirement of medical diagnosis. Our simulation results suggest the prospect of producing medically interesting isomers with photo-excitation using the state-of-art LCS γ-ray beam facility.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
Stochastic mesoscale circulation dynamics in the thermal ocean
Authors:
Darryl D. Holm,
Erwin Luesink,
Wei Pan
Abstract:
In analogy with similar effects in adiabatic compressible fluid dynamics, the effects of buoyancy gradients on incompressible stratified flows are said to be `thermal'. The thermal rotating shallow water (TRSW) model equations contain three small nondimensional parameters. These are the Rossby number, the Froude number and the buoyancy parameter. Asymptotic expansion of the TRSW model equations in…
▽ More
In analogy with similar effects in adiabatic compressible fluid dynamics, the effects of buoyancy gradients on incompressible stratified flows are said to be `thermal'. The thermal rotating shallow water (TRSW) model equations contain three small nondimensional parameters. These are the Rossby number, the Froude number and the buoyancy parameter. Asymptotic expansion of the TRSW model equations in these three small parameters leads to the deterministic thermal versions of the Salmon's L1 (TL1) model and the thermal quasi-geostrophic (TQG) model, upon expanding in the neighbourhood of thermal quasi-geostrophic balance among the flow velocity and the gradients of free surface elevation and buoyancy. The linear instability of TQG at high wave number tends to create circulation at small scales. Such a high wave number instability could be unresolvable in many computational simulations, but its presence at small scales may contribute significantly to fluid transport at resolvable scales. Sometimes such effects are modelled via `stochastic backscatter of kinetic energy'. Here we try another approach. Namely, we model `stochastic transport' in the hierarchy of models TRSW/TL1/TQG. The models are derived via the approach of stochastic advection by Lie transport (SALT) as obtained from a recently introduced stochastic version of the Euler--Poincaré variational principle. We also indicate the potential next steps for applying these models in uncertainty quantification and data assimilation of the rapid, high wavenumber effects of buoyancy fronts at these three levels of description by using the data-driven stochastic parametrisation algorithms derived previously using the SALT approach.
△ Less
Submitted 8 December, 2020; v1 submitted 10 June, 2020;
originally announced June 2020.
-
The Effects of Stringent Interventions for Coronavirus Pandemic
Authors:
Ting Tian,
Wenxiang Luo,
Yukang Jiang,
Minqiong Chen,
Canhong Wen,
Wenliang Pan,
Xueqin Wang
Abstract:
The pandemic of COVID-19 has caused severe public health consequences around the world. Many interventions of COVID-19 have been implemented. It is of great public health and societal importance to evaluate the effects of interventions in the pandemic of COVID-19. In this paper, with help of synthetic control method, regression discontinuity and a Susceptible-Infected and infectious without isolat…
▽ More
The pandemic of COVID-19 has caused severe public health consequences around the world. Many interventions of COVID-19 have been implemented. It is of great public health and societal importance to evaluate the effects of interventions in the pandemic of COVID-19. In this paper, with help of synthetic control method, regression discontinuity and a Susceptible-Infected and infectious without isolation-Hospitalized in isolation-Removed (SIHR) model, we evaluate the horizontal and longitudinal effects of stringent interventions implemented in Wenzhou, a representative urban city of China, where stringent interventions were enforced to curb its own epidemic situation with rapidly increasing newly confirmed cases. We found that there were statistically significant treatment effects of those stringent interventions which reduced the cumulative confirmed cases of COVID-19. Those reduction effects would increase over time. Also, if the stringent interventions were delayed by 2 days or mild interventions were implemented instead, the expected number of cumulative confirmed cases would have been nearly 2 times or 5 times of the actual number. The effects of stringent interventions are significant in mitigating the epidemic situation of COVID-19. The slower the interventions were implemented, the more severe the epidemic would have been, and the stronger the interventions would have been required.
△ Less
Submitted 31 May, 2020;
originally announced June 2020.
-
Establishing simple relationship between eigenvector and matrix elements
Authors:
Wei Pan,
Jing Wang,
Deyan Sun
Abstract:
A simple approximate relationship between the ground-state eigenvector and the sum of matrix elements in each row has been established for real symmetric matrices with non-positive off-diagonal elements. Specifically, the $i$-th components of the ground-state eigenvector could be calculated by $(-S_i)^p+c$, where $S_i$ is the sum of elements in the $i$-th row of the matrix with $p$ and $c$ being v…
▽ More
A simple approximate relationship between the ground-state eigenvector and the sum of matrix elements in each row has been established for real symmetric matrices with non-positive off-diagonal elements. Specifically, the $i$-th components of the ground-state eigenvector could be calculated by $(-S_i)^p+c$, where $S_i$ is the sum of elements in the $i$-th row of the matrix with $p$ and $c$ being variational parameters. The simple relationship provides a straightforward method to directly calculate the ground-state eigenvector for a matrix. Our preliminary applications to the Hubbard model and the Ising model in a transverse field show encouraging results.The simple relationship also provide the optimal initial state for other more accurate methods, such as the Lanczos method.
△ Less
Submitted 5 February, 2020;
originally announced March 2020.
-
Data assimilation for a quasi-geostrophic model with circulation-preserving stochastic transport noise
Authors:
Colin Cotter,
Dan Crisan,
Darryl Holm,
Wei Pan,
Igor Shevchenko
Abstract:
This paper contains the latest installment of the authors' project on developing ensemble based data assimilation methodology for high dimensional fluid dynamics models. The algorithm presented here is a particle filter that combines model reduction, tempering, jittering, and nudging. The methodology is tested on a two-layer quasi-geostrophic model for a $β$-plane channel flow with $O(10^6)$ degre…
▽ More
This paper contains the latest installment of the authors' project on developing ensemble based data assimilation methodology for high dimensional fluid dynamics models. The algorithm presented here is a particle filter that combines model reduction, tempering, jittering, and nudging. The methodology is tested on a two-layer quasi-geostrophic model for a $β$-plane channel flow with $O(10^6)$ degrees of freedom out of which only a minute fraction are noisily observed. The model is reduced by following the stochastic variational approach for geophysical fluid dynamics introduced in Holm (Proc Roy Soc A, 2015) as a framework for deriving stochastic parametrisations for unresolved scales. The reduction is substantial: the computations are done only for $O(10^4)$ degrees of freedom. We introduce a stochastic time-stepping scheme for the two-layer model and prove its consistency in time. Then, we analyze the effect of the different procedures (tempering combined with jittering and nudging) on the performance of the data assimilation procedure using the reduced model, as well as how the dimension of the observational data (the number of "weather stations") and the data assimilation step affect the accuracy and uncertainty of the results.
△ Less
Submitted 1 October, 2019;
originally announced October 2019.
-
A Particle Filter for Stochastic Advection by Lie Transport (SALT): A case study for the damped and forced incompressible 2D Euler equation
Authors:
Colin Cotter,
Dan Crisan,
Darryl D. Holm,
Wei Pan,
Igor Shevchenko
Abstract:
In this work, we combine a stochastic model reduction with a particle filter augmented with tempering and jittering, and apply the combined algorithm to a damped and forced incompressible 2D Euler dynamics defined on a simply connected bounded domain.
We show that using the combined algorithm, we are able to assimilate data from a reference system state (the ``truth") modelled by a highly resolv…
▽ More
In this work, we combine a stochastic model reduction with a particle filter augmented with tempering and jittering, and apply the combined algorithm to a damped and forced incompressible 2D Euler dynamics defined on a simply connected bounded domain.
We show that using the combined algorithm, we are able to assimilate data from a reference system state (the ``truth") modelled by a highly resolved numerical solution of the flow that has roughly $3.1\times10^6$ degrees of freedom, into a stochastic system having two orders of magnitude less degrees of freedom, which is able to approximate the true state reasonably accurately for $5$ large scale eddy turnover times, using modest computational hardware.
The model reduction is performed through the introduction of a stochastic advection by Lie transport (SALT) model as the signal on a coarser resolution. The SALT approach was introduced as a general theory using a geometric mechanics framework from Holm, Proc. Roy. Soc. A (2015). This work follows on the numerical implementation for SALT presented by Cotter et al, SIAM Multiscale Model. Sim. (2019) for the flow in consideration. The model reduction is substantial: The reduced SALT model has $4.9\times 10^4$ degrees of freedom.
Results from reliability tests on the assimilated system are also presented.
△ Less
Submitted 24 August, 2020; v1 submitted 27 July, 2019;
originally announced July 2019.
-
Multifunctional photonic integrated circuit for diverse microwave signal generation, transmission and processing
Authors:
Xihua Zou,
Fang Zou,
Zizheng Cao,
Bing Lu,
Xianglei Yan,
Ge Yu,
Xiong Deng,
Bin Luo,
Lianshan Yan,
Wei Pan,
Jianping Yao,
Antonius M. J. Koonen
Abstract:
Microwave photonics (MWP) studies the interaction between microwave and optical waves for the generation, transmission and processing of microwave signals (i.e., three key domains), taking advantages of broad bandwidth and low loss offered by modern photonics. Integrated MWP using photonic integrated circuits (PICs) can reach a compact, reliable and green implementation. Most PICs, however, are re…
▽ More
Microwave photonics (MWP) studies the interaction between microwave and optical waves for the generation, transmission and processing of microwave signals (i.e., three key domains), taking advantages of broad bandwidth and low loss offered by modern photonics. Integrated MWP using photonic integrated circuits (PICs) can reach a compact, reliable and green implementation. Most PICs, however, are recently developed to perform one or more functions restricted inside a single domain. In this paper, as highly desired, a multifunctional PIC is proposed to cover the three key domains. The PIC is fabricated on InP platform by monolithically integrating four laser diodes and two modulators. Using the multifunctional PIC, seven fundamental functions across microwave signal generation, transmission and processing are demonstrated experimentally. Outdoor field trials for electromagnetic environment surveillance along an in-service high-speed railway are also performed. The success to such a PIC marks a key step forward for practical and massive MWP implementations.
△ Less
Submitted 26 March, 2019;
originally announced April 2019.
-
A spatially adaptive high-order meshless method for fluid-structure interactions
Authors:
Wei Hu,
Nathaniel Trask,
Xiaozhe Hu,
Wenxiao Pan
Abstract:
We present a scheme implementing an a posteriori refinement strategy in the context of a high-order meshless method for problems involving point singularities and fluid-solid interfaces. The generalized moving least squares (GMLS) discretization used in this work has been previously demonstrated to provide high-order compatible discretization of the Stokes and Darcy problems, offering a high-fidel…
▽ More
We present a scheme implementing an a posteriori refinement strategy in the context of a high-order meshless method for problems involving point singularities and fluid-solid interfaces. The generalized moving least squares (GMLS) discretization used in this work has been previously demonstrated to provide high-order compatible discretization of the Stokes and Darcy problems, offering a high-fidelity simulation tool for problems with moving boundaries. The meshless nature of the discretization is particularly attractive for adaptive h-refinement, especially when resolving the near-field aspects of variables and point singularities governing lubrication effects in fluid-structure interactions. We demonstrate that the resulting spatially adaptive GMLS method is able to achieve optimal convergence in the presence of singularities for both the div-grad and Stokes problems. Further, we present a series of simulations for flows of colloid suspensions, in which the refinement strategy efficiently achieved highly accurate solutions, particularly for colloids with complex geometries.
△ Less
Submitted 25 January, 2019;
originally announced February 2019.
-
Discrete-element model for the interaction between ocean waves and sea ice
Authors:
Zhijie Xu,
Alexandre M. Tartakovsky,
Wenxiao Pan
Abstract:
We present a discrete element method (DEM) model to simulate the mechanical behavior of sea ice in response to ocean waves. The interaction of ocean waves and sea ice can potentially lead to the fracture and fragmentation of sea ice depending on the wave amplitude and period. The fracture behavior of sea ice is explicitly modeled by a DEM method, where sea ice is modeled by densely packed spherica…
▽ More
We present a discrete element method (DEM) model to simulate the mechanical behavior of sea ice in response to ocean waves. The interaction of ocean waves and sea ice can potentially lead to the fracture and fragmentation of sea ice depending on the wave amplitude and period. The fracture behavior of sea ice is explicitly modeled by a DEM method, where sea ice is modeled by densely packed spherical particles with finite size. These particles are bonded together at their contact points through mechanical bonds that can sustain both tensile and compressive forces and moments. Fracturing can be naturally represented by the sequential breaking of mechanical bonds. For a given amplitude and period of incident ocean wave, the model provides information for the spatial distribution and time evolution of stress and micro-fractures and the fragment size distribution. We demonstrate that the fraction of broken bonds, , increases with increasing wave amplitude. In contrast, the ice fragment size l decreases with increasing amplitude. This information is important for the understanding of breakup of individual ice floes and floe fragment size.
△ Less
Submitted 2 August, 2018;
originally announced August 2018.
-
A Consistent Spatially Adaptive Smoothed Particle Hydrodynamics Method for Fluid-Structure Interactions
Authors:
Wei Hu,
Guannan Guo,
Xiaozhe Hu,
Dan Negrut,
Zhijie Xu,
Wenxiao Pan
Abstract:
A new consistent, spatially adaptive, smoothed particle hydrodynamics (SPH) method for Fluid-Structure Interactions (FSI) is presented. The method combines several attributes that have not been simultaneously satisfied by other SPH methods. Specifically, it is second-order convergent; it allows for resolutions spatially adapted with moving (translating and rotating) boundaries of arbitrary geometr…
▽ More
A new consistent, spatially adaptive, smoothed particle hydrodynamics (SPH) method for Fluid-Structure Interactions (FSI) is presented. The method combines several attributes that have not been simultaneously satisfied by other SPH methods. Specifically, it is second-order convergent; it allows for resolutions spatially adapted with moving (translating and rotating) boundaries of arbitrary geometries; and, it accelerates the FSI solution as the adaptive approach leads to fewer degrees of freedom without sacrificing accuracy. The key ingredients in the method are a consistent discretization of differential operators, a \textit{posteriori} error estimator/distance-based criterion of adaptivity, and a particle-shifting technique. The method is applied in simulating six different flows or FSI problems. The new method's convergence, accuracy, and efficiency attributes are assessed by comparing the results it produces with analytical, finite element, and consistent SPH uniform high-resolution solutions as well as experimental data.
△ Less
Submitted 8 March, 2018;
originally announced March 2018.
-
Modelling uncertainty using stochastic transport noise in a 2-layer quasi-geostrophic model
Authors:
Colin Cotter,
Dan Crisan,
Darryl D. Holm,
Wei Pan,
Igor Shevchenko
Abstract:
The stochastic variational approach for geophysical fluid dynamics was introduced by Holm (Proc Roy Soc A, 2015) as a framework for deriving stochastic parameterisations for unresolved scales. This paper applies the variational stochastic parameterisation in a two-layer quasi-geostrophic model for a beta-plane channel flow configuration. We present a new method for estimating the stochastic forcin…
▽ More
The stochastic variational approach for geophysical fluid dynamics was introduced by Holm (Proc Roy Soc A, 2015) as a framework for deriving stochastic parameterisations for unresolved scales. This paper applies the variational stochastic parameterisation in a two-layer quasi-geostrophic model for a beta-plane channel flow configuration. We present a new method for estimating the stochastic forcing (used in the parameterisation) to approximate unresolved components using data from the high resolution deterministic simulation, and describe a procedure for computing physically-consistent initial conditions for the stochastic model. We also quantify uncertainty of coarse grid simulations relative to the fine grid ones in homogeneous (teamed with small-scale vortices) and heterogeneous (featuring horizontally elongated large-scale jets) flows, and analyse how the spread of stochastic solutions depends on different parameters of the model. The parameterisation is tested by comparing it with the true eddy-resolving solution that has reached some statistical equilibrium and the deterministic solution modelled on a low-resolution grid. The results show that the proposed parameterisation significantly depends on the resolution of the stochastic model and gives good ensemble performance for both homogeneous and heterogeneous flows, and the parameterisation lays solid foundations for data assimilation.
△ Less
Submitted 13 July, 2020; v1 submitted 15 February, 2018;
originally announced February 2018.
-
Numerically Modelling Stochastic Lie Transport in Fluid Dynamics
Authors:
Colin J. Cotter,
Dan Crisan,
Darryl D. Holm,
Wei Pan,
Igor Shevchenko
Abstract:
We present a numerical investigation of stochastic transport in ideal fluids. According to Holm (Proc Roy Soc, 2015) and Cotter et al. (2017), the principles of transformation theory and multi-time homogenisation, respectively, imply a physically meaningful, data-driven approach for decomposing the fluid transport velocity into its drift and stochastic parts, for a certain class of fluid flows. In…
▽ More
We present a numerical investigation of stochastic transport in ideal fluids. According to Holm (Proc Roy Soc, 2015) and Cotter et al. (2017), the principles of transformation theory and multi-time homogenisation, respectively, imply a physically meaningful, data-driven approach for decomposing the fluid transport velocity into its drift and stochastic parts, for a certain class of fluid flows. In the current paper, we develop new methodology to implement this velocity decomposition and then numerically integrate the resulting stochastic partial differential equation using a finite element discretisation for incompressible 2D Euler fluid flows. The new methodology tested here is found to be suitable for coarse graining in this case. Specifically, we perform uncertainty quantification tests of the velocity decomposition of Cotter et al. (2017), by comparing ensembles of coarse-grid realisations of solutions of the resulting stochastic partial differential equation with the "true solutions" of the deterministic fluid partial differential equation, computed on a refined grid. The time discretization used for approximating the solution of the stochastic partial differential equation is shown to be consistent. We include comprehensive numerical tests that confirm the non-Gaussianity of the stream function, velocity and vorticity fields in the case of incompressible 2D Euler fluid flows.
△ Less
Submitted 26 September, 2018; v1 submitted 29 January, 2018;
originally announced January 2018.
-
Commissioning of te China-ADS injector-I testing facility
Authors:
Fang Yan,
Huiping Geng,
Cai Meng,
Yaliang Zhao,
Huafu Ouyang,
Shilun Pei,
Rong Liu,
Feisi He,
Tongming Huang,
Rui Ge,
Yanfeng Sui,
Qiang Ye,
Xiaoping Jing,
Fengli Long,
Jungang Li,
Quanling Peng,
Dizhou Guo,
Zusheng Zhou,
Haiyin Lin,
Xinpeng Ma,
Qunyao Wang,
Guangwei Wang,
Hua Shi,
Gang Wu,
Shengchang Wang
, et al. (36 additional authors not shown)
Abstract:
The 10 MeV accelerator-driven subcritical system (ADS) Injector-I test stand at Institute of High Energy Physics (IHEP) is a testing facility dedicated to demonstrate one of the two injector design schemes [Injector Scheme-I, which works at 325 MHz], for the ADS project in China. The Injector adopted a four vane copper structure RFQ with output energy of 3.2 MeV and a superconducting (SC) section…
▽ More
The 10 MeV accelerator-driven subcritical system (ADS) Injector-I test stand at Institute of High Energy Physics (IHEP) is a testing facility dedicated to demonstrate one of the two injector design schemes [Injector Scheme-I, which works at 325 MHz], for the ADS project in China. The Injector adopted a four vane copper structure RFQ with output energy of 3.2 MeV and a superconducting (SC) section accommodating fourteen \b{eta}g=0.12 single spoke cavities, fourteen SC solenoids and fourteen cold BPMs. The ion source was installed since April of 2014, periods of commissioning are regularly scheduled between installation phases of the rest of the injector. Continuous wave (CW) beam was shooting through the injector and 10 MeV CW proton beam with average beam current around 2 mA was obtained recently. This contribution describe the results achieved so far and the difficulties encountered in CW commissioning.
△ Less
Submitted 15 May, 2017;
originally announced May 2017.
-
A Consistent Multi-Resolution Smoothed Particle Hydrodynamics Method
Authors:
Wei Hu,
Wenxiao Pan,
Milad Rakhsha,
Qiang Tian,
Haiyan Hu,
Dan Negrut
Abstract:
We seek to accelerate and increase the size of simulations for fluid-structure interactions (FSI) by using multiple resolutions in the spatial discretization of the equations governing the time evolution of systems displaying two-way fluid-solid coupling. To this end, we propose a multi-resolution smoothed particle hydrodynamics (SPH) approach in which subdomains of different resolutions are direc…
▽ More
We seek to accelerate and increase the size of simulations for fluid-structure interactions (FSI) by using multiple resolutions in the spatial discretization of the equations governing the time evolution of systems displaying two-way fluid-solid coupling. To this end, we propose a multi-resolution smoothed particle hydrodynamics (SPH) approach in which subdomains of different resolutions are directly coupled without any overlap region. The second-order consistent discretization of spatial differential operators is employed to ensure the accuracy of the proposed method. As SPH particles advect with the flow, a dynamic SPH particle refinement/coarsening is employed via splitting/merging to maintain a predefined multi-resolution configuration. Particle regularity is enforced via a particle-shifting technique to ensure accuracy and stability of the Lagrangian particle-based method embraced. The convergence, accuracy, and efficiency attributes of the new method are assessed by simulating four different flows. In this process, the numerical results are compared to the analytical, finite element, and consistent SPH single-resolution solutions. We anticipate that the proposed multi-resolution method will enlarge the class of SPH-tractable FSI applications.
△ Less
Submitted 13 April, 2017;
originally announced April 2017.
-
Tunable Photonic Radiofrequency Filter with An Ultra-high Out-Of-Band Rejection
Authors:
Peixuan Li,
Xihua Zou,
Wei Pan,
Lianshan Yan,
Shilong Pan
Abstract:
As radiofrequency filtering plays a vital role in electromagnetic devices and systems, recently photonic techniques have been intensively studied to implement radiofrequency filters to harness wide frequency coverage, large instantaneous bandwidth, low frequency-dependent loss, flexible tunability and strong immunity to electromagnetic interference. However, one crucial challenge facing the photon…
▽ More
As radiofrequency filtering plays a vital role in electromagnetic devices and systems, recently photonic techniques have been intensively studied to implement radiofrequency filters to harness wide frequency coverage, large instantaneous bandwidth, low frequency-dependent loss, flexible tunability and strong immunity to electromagnetic interference. However, one crucial challenge facing the photonic radiofrequency filter (PRF) is the less impressive out-of-band rejection. Here, to the best of our knowledge, we demonstrate a tunable PRF with a record out-of-band rejection of 80 dB, which is 3 dB higher than the maximum value (~77 dB) reported so far, when incorporating highly selective polarization control and large narrow-band amplification enabled by stimulated Brillouin scattering effect. In particular, this record rejection is arduous to be achieved for a narrow passband (e.g., a few megahertz) and a high finesse in a PRF. Moreover, the proposed PRF is an active one capable of providing negligible insertion loss and even signal gain. Tunable central frequency ranging from 2.1 to 6.1 GHz is also demonstrated. The proposed PRF will provide an ultra-high noise or clutter suppression for harsh electromagnetic scenarios, particularly when room-temperature implementation and remote distribution are needed.
△ Less
Submitted 23 November, 2016; v1 submitted 16 November, 2016;
originally announced November 2016.
-
Development of Fundamental Power Coupler for C-ADS Superconducting Elliptical cavities
Authors:
Kui-Xiang Gu,
Feng Bing,
Wei-Min Pan,
Tong-Ming Huang,
Qiang Ma,
Fan-Bo Meng
Abstract:
5-cell elliptical cavities are chosen for the main linac of China Accelerator Driven sub-critical System in the medium energy section. Each cavity is driven by one fundamental power coupler delivering RF power up to 150 kW. A single window, coaxial type coupler satisfying high power requirements, class 10 clean room assembly with cavity and low heat load simultaneously was designed. This paper giv…
▽ More
5-cell elliptical cavities are chosen for the main linac of China Accelerator Driven sub-critical System in the medium energy section. Each cavity is driven by one fundamental power coupler delivering RF power up to 150 kW. A single window, coaxial type coupler satisfying high power requirements, class 10 clean room assembly with cavity and low heat load simultaneously was designed. This paper gives the details of RF design, external Q calculation and thermal analysis as well as multipacting simulations of the coupler.
△ Less
Submitted 6 March, 2017; v1 submitted 20 October, 2016;
originally announced October 2016.
-
Human collective intelligence as distributed Bayesian inference
Authors:
Peter M. Krafft,
Julia Zheng,
Wei Pan,
Nicolás Della Penna,
Yaniv Altshuler,
Erez Shmueli,
Joshua B. Tenenbaum,
Alex Pentland
Abstract:
Collective intelligence is believed to underly the remarkable success of human society. The formation of accurate shared beliefs is one of the key components of human collective intelligence. How are accurate shared beliefs formed in groups of fallible individuals? Answering this question requires a multiscale analysis. We must understand both the individual decision mechanisms people use, and the…
▽ More
Collective intelligence is believed to underly the remarkable success of human society. The formation of accurate shared beliefs is one of the key components of human collective intelligence. How are accurate shared beliefs formed in groups of fallible individuals? Answering this question requires a multiscale analysis. We must understand both the individual decision mechanisms people use, and the properties and dynamics of those mechanisms in the aggregate. As of yet, mathematical tools for such an approach have been lacking. To address this gap, we introduce a new analytical framework: We propose that groups arrive at accurate shared beliefs via distributed Bayesian inference. Distributed inference occurs through information processing at the individual level, and yields rational belief formation at the group level. We instantiate this framework in a new model of human social decision-making, which we validate using a dataset we collected of over 50,000 users of an online social trading platform where investors mimic each others' trades using real money in foreign exchange and other asset markets. We find that in this setting people use a decision mechanism in which popularity is treated as a prior distribution for which decisions are best to make. This mechanism is boundedly rational at the individual level, but we prove that in the aggregate implements a type of approximate "Thompson sampling"---a well-known and highly effective single-agent Bayesian machine learning algorithm for sequential decision-making. The perspective of distributed Bayesian inference therefore reveals how collective rationality emerges from the boundedly rational decision mechanisms people use.
△ Less
Submitted 5 August, 2016;
originally announced August 2016.
-
Collective, Coherent, and Ultrastrong Coupling of 2D Electrons with Terahertz Cavity Photons
Authors:
Qi Zhang,
Minhan Lou,
Xinwei Li,
John L. Reno,
Wei Pan,
John D. Watson,
Michael J. Manfra,
Junichiro Kono
Abstract:
Nonperturbative coupling of light with condensed matter in an optical cavity is expected to reveal a host of coherent many-body phenomena and states. In addition, strong coherent light-matter interaction in a solid-state environment is of great interest to emerging quantum-based technologies. However, creating a system that combines a long electronic coherence time, a large dipole moment, and a hi…
▽ More
Nonperturbative coupling of light with condensed matter in an optical cavity is expected to reveal a host of coherent many-body phenomena and states. In addition, strong coherent light-matter interaction in a solid-state environment is of great interest to emerging quantum-based technologies. However, creating a system that combines a long electronic coherence time, a large dipole moment, and a high cavity quality ($Q$) factor has been a challenging goal. Here, we report collective ultrastrong light-matter coupling in an ultrahigh-mobility two-dimensional electron gas in a high-$Q$ terahertz photonic-crystal cavity in a quantizing magnetic field, demonstrating a cooperativity of $\sim$360. The splitting of cyclotron resonance (CR) into the lower and upper polariton branches exhibited a $\sqrt{n_\mathrm{e}}$-dependence on the electron density ($n_\mathrm{e}$), a hallmark of collective vacuum Rabi splitting. Furthermore, a small but definite blue shift was observed for the polariton frequencies due to the normally negligible $A^2$ term in the light-matter interaction Hamiltonian. Finally, the high-$Q$ cavity suppressed the superradiant decay of coherent CR, which resulted in an unprecedentedly narrow intrinsic CR linewidth of 5.6 GHz at 2 K. These results open up a variety of new possibilities to combine the traditional disciplines of many-body condensed matter physics and cavity-based quantum optics.
△ Less
Submitted 27 April, 2016;
originally announced April 2016.
-
Design of a 325MHz Half Wave Resonator prototype at IHEP
Authors:
Xinying Zhang,
Weimin Pan,
Guangwei Wang,
Bo Xu,
Guangyuan Zhao,
Feisi He,
Zhongquan Li,
Qiang Ma,
Jin Dai,
Xu Chen,
Yaping Liu,
Zhou Xue,
Xuefang Huang,
Yi Sun
Abstract:
A 325MHz beta=0.14 superconducting half wave resonator(HWR) prototype has been developed at the Institute of High Energy Physics(IHEP), which can be applied in continuous wave (CW) high beam proton accelerators. In this paper, the electromagnetic (EM) design, multipacting simulation, mechanical optimization, and fabrication are introduced in details. In vertical test at 4.2K, the cavity reached Ea…
▽ More
A 325MHz beta=0.14 superconducting half wave resonator(HWR) prototype has been developed at the Institute of High Energy Physics(IHEP), which can be applied in continuous wave (CW) high beam proton accelerators. In this paper, the electromagnetic (EM) design, multipacting simulation, mechanical optimization, and fabrication are introduced in details. In vertical test at 4.2K, the cavity reached Eacc=7MV/m with Q0=1.4*10^9 and Eacc=15.9MV/m with Q0=4.3*10^8.
△ Less
Submitted 2 November, 2015;
originally announced November 2015.
-
Formation of in-volume nanogratings with sub-100 nm periods in glass by femtosecond laser irradiation
Authors:
Yang Liao,
Wangjun Pan,
Yun Cui,
Lingling Qiao,
Yves Bellouard,
Koji Sugioka,
Ya Cheng
Abstract:
We present direct experimental observation of the morphological evolution during the formation of nanogratings with sub-100-nm periods with the increasing number of pulses. Theoretical simulation shows that the constructive interference of the scattering light from original nanoplanes will create an intensity maximum located between the two adjacent nanoplanes, resulting in shortening of the nanog…
▽ More
We present direct experimental observation of the morphological evolution during the formation of nanogratings with sub-100-nm periods with the increasing number of pulses. Theoretical simulation shows that the constructive interference of the scattering light from original nanoplanes will create an intensity maximum located between the two adjacent nanoplanes, resulting in shortening of the nanograting period by half. The proposed mechanism enables explaining the formation of nanogratings with periods beyond that predicted by the nanoplasmonic model.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
Terahertz magneto-optical spectroscopy of two-dimensional hole and electron systems
Authors:
N. Kamaraju,
W. Pan,
U. Ekenberg,
D. M. Gvozdić,
S. Boubanga-Tombet,
P. C. Upadhya,
J. Reno,
A. J. Taylor,
R. P. Prasankumar
Abstract:
We have used terahertz (THz) magneto-optical spectroscopy to investigate the cyclotron resonance in high mobility two-dimensional electron and hole systems. Our experiments reveal long-lived (~20 ps) coherent oscillations in the measured signal in the presence of a perpendicular magnetic field. The cyclotron frequency extracted from the oscillations varies linearly with magnetic field for a two-di…
▽ More
We have used terahertz (THz) magneto-optical spectroscopy to investigate the cyclotron resonance in high mobility two-dimensional electron and hole systems. Our experiments reveal long-lived (~20 ps) coherent oscillations in the measured signal in the presence of a perpendicular magnetic field. The cyclotron frequency extracted from the oscillations varies linearly with magnetic field for a two-dimensional electron gas (2DEG), as expected. However, we find that the complex non-parabolic valence band structure in a two-dimensional hole gas (2DHG) causes the cyclotron frequency and effective mass to vary nonlinearly with the magnetic field, as verified by multiband Landau level calculations. This is the first time that THz magneto-optical spectroscopy has been used to study 2DHG, and we expect that these results will motivate further studies of these unique 2D nanosystems.
△ Less
Submitted 16 December, 2014;
originally announced December 2014.
-
Temperature Effect and Correction Method of White Rabbit Timing Link
Authors:
Hongming Li,
Guanghua Gong,
Weibin Pan,
Qiang Du,
Jianmin Li
Abstract:
To guarantee the angular resolution, the Large High Altitude Air Shower Observatory (LHAASO) requires a 500ps (rms) timing synchronization among the 6866 detect units for its KM2A sub-detector array. The White Rabbit technology is applied which combines sub-nanosecond precision timing transfer and gigabit Ethernet data transfer over the same fiber media. Deployed on a wild field at 4300m a.s.l. al…
▽ More
To guarantee the angular resolution, the Large High Altitude Air Shower Observatory (LHAASO) requires a 500ps (rms) timing synchronization among the 6866 detect units for its KM2A sub-detector array. The White Rabbit technology is applied which combines sub-nanosecond precision timing transfer and gigabit Ethernet data transfer over the same fiber media. Deployed on a wild field at 4300m a.s.l. altitude, the WR network must maintain the precision over a wide temperature range. The temperature effect on a small WR link is measured, and contributions from different components like optical fiber, SFP module, fixed delay on PCB and ICs are separately studied and analyzed. An online real-time temperature correction method was applied based on the result which significantly reduce the synchronization variation from 300 ps to 50 ps in a temperature range of 50 degrees centigrade.
△ Less
Submitted 16 June, 2014;
originally announced June 2014.
-
Fluorescence Correlation Spectroscopy and Nonlinear Stochastic Reaction-Diffusion
Authors:
Mauricio J. Del Razo,
Wenxiao Pan,
Hong Qian,
Guang Lin
Abstract:
The currently existing theory of fluorescence correlation spectroscopy(FCS) is based on the linear fluctuation theory originally developed by Einstein, Onsager, Lax, and others as a phenomenological approach to equilibrium fluctuations in bulk solutions. For mesoscopic reaction-diffusion systems with nonlinear chemical reactions among a small number of molecules, a situation often encountered in s…
▽ More
The currently existing theory of fluorescence correlation spectroscopy(FCS) is based on the linear fluctuation theory originally developed by Einstein, Onsager, Lax, and others as a phenomenological approach to equilibrium fluctuations in bulk solutions. For mesoscopic reaction-diffusion systems with nonlinear chemical reactions among a small number of molecules, a situation often encountered in single-cell biochemistry, it is expected that FCS time correlation functions of a reaction-diffusion system can deviate from the classic results of Elson and Magde. We first discuss this nonlinear effect for reaction systems without diffusion. For nonlinear stochastic reaction-diffusion systems here are no closed solutions; therefore, stochastic Monte-Carlo simulations are carried out. We show that the deviation is small for a simple bimolecular reaction; the most significant deviations occur when the number of molecules is small and of the same order. Our results show that current linear FCS theory could be adequate for measurements on biological systems that contain many other sources of uncertainties. At the same time it provides a framework for future measurements of nonlinear, fluctuating chemical reactions with high-precision FCS. Extending Delbrück-Gillespie's theory for stochastic nonlinear reactions with rapidly stirring to reaction-diffusion systems provides a mesoscopic model for chemical and biochemical reactions at nanometric and mesoscopic level such as a single biological cell.
△ Less
Submitted 16 June, 2014; v1 submitted 13 June, 2014;
originally announced June 2014.
-
Design and test of frequency tuner for CAEP high power THz free-electron laser
Authors:
Zhenghui Mi,
Yi Sun,
Weimin Pan,
Haiying Lin,
Danyang Zhao,
Xiangyang Lu,
Shengwen Quan,
Xing Luo,
Ming Li,
Xingfan Yang,
Guangwei Wang,
Jianping Dai,
Zhongquan Li,
Qiang Ma,
Peng Sha
Abstract:
Peking University is developing a 1.3 GHz superconducting accelerating section for China Academy of Engineering Physics (CAEP) high power THz free-electron laser. A compact fast/slow tuner has developed by Institute of High Energy Physics (IHEP) for the accelerating section, to control Lorentz detuning, beam loading effect, compensate for microphonics and liquid Helium pressure fluctuations. The t…
▽ More
Peking University is developing a 1.3 GHz superconducting accelerating section for China Academy of Engineering Physics (CAEP) high power THz free-electron laser. A compact fast/slow tuner has developed by Institute of High Energy Physics (IHEP) for the accelerating section, to control Lorentz detuning, beam loading effect, compensate for microphonics and liquid Helium pressure fluctuations. The tuner design, warm test and cold test of the first prototype are presented.
△ Less
Submitted 14 April, 2014;
originally announced April 2014.
-
Wide-open, high-resolution microwave/millimeter-wave Doppler frequency shift estimation using photonics technology
Authors:
Xihua Zou,
Wangzhe Li,
Bing Lu,
Wei Pan,
Lianshan Yan,
Liyang Shao
Abstract:
Today, wide-open, high-resolution Doppler frequency shift (DFS) estimation is essential for radar, microwave/millimeter-wave, and communication systems. Using photonics technology, an effective approach is proposed and experimentally demonstrated, providing a high-resolution and frequency-independent solution. In the approach consisting of two cascaded opto-electronic modulators, DFS between the t…
▽ More
Today, wide-open, high-resolution Doppler frequency shift (DFS) estimation is essential for radar, microwave/millimeter-wave, and communication systems. Using photonics technology, an effective approach is proposed and experimentally demonstrated, providing a high-resolution and frequency-independent solution. In the approach consisting of two cascaded opto-electronic modulators, DFS between the transmitted microwave/ millimeter-wave signal and the received echo signal is mapped into a doubled spacing between two target optical sidebands. Subsequently, the DFS is then estimated through the spectrum analysis of a generated low-frequency electrical signal, with an improved resolution by a factor of 2. In experiments, DFSs from -90 to 90 KHz are successfully estimated for microwave/millimeter-wave signals at 10, 15, and 30 GHz, where estimation errors keep lower than +/- 5e-10 Hz. For radial velocity measurement, these results reveal a range from 0 to 900 m/s (0 to 450 m/s) and a resolution of 1e-11 m/s (5e-12 m/s) at 15-GHz (30-GHz) frequency band.
△ Less
Submitted 8 April, 2014;
originally announced April 2014.
-
The study and design of RF coupler for Chinese ADS HWR Superconducting Cavity
Authors:
Fanbo Meng,
Xu Chen,
Weimin Pan,
Tongming Huang,
Qiang Ma,
Haiying Lin,
Xiaohua Peng
Abstract:
RF power coupler is a key component of the superconducting accelerating system in Chinese ADS proton linac injector I, which is used to transmit 15kW RF power from the power source to the superconducting HWR cavity. According to the requirement of working frequency, power level, transmission capability and cooling condition, the physics design of coupler has been finished, which includes RF struct…
▽ More
RF power coupler is a key component of the superconducting accelerating system in Chinese ADS proton linac injector I, which is used to transmit 15kW RF power from the power source to the superconducting HWR cavity. According to the requirement of working frequency, power level, transmission capability and cooling condition, the physics design of coupler has been finished, which includes RF structure optimization, thermal simulation, thermal stress analysis and so on. Based on this design, the prototype of HWR coupler has been fabricated, and then has passed the high power test successfully.
△ Less
Submitted 5 December, 2013;
originally announced December 2013.
-
Coupler Conditioning and High Power Testing of ADS Spoke Cavity
Authors:
Xu Chen,
Fanbo Meng,
Tongming Huang,
Qiang Ma,
Haiying Ling,
Weimin Pan
Abstract:
Power couplers, used in China-ADS proton linac injector I, are required to transfer 6kW RF power to the superconducting Spoke cavities. At present, first two couplers of coaxial design have been fabricated and accomplished high power test at IHEP. The test results indicated that couplers of this design are qualified to deliver 10kW RF power in continuous travelling wave mode. This paper described…
▽ More
Power couplers, used in China-ADS proton linac injector I, are required to transfer 6kW RF power to the superconducting Spoke cavities. At present, first two couplers of coaxial design have been fabricated and accomplished high power test at IHEP. The test results indicated that couplers of this design are qualified to deliver 10kW RF power in continuous travelling wave mode. This paper described the coupler's room temperature test procedures and results, discussed the original high power test terminated due to serious out-gassing and after some modifications. In the final test, the couplers smoothly exceeded the design power level.
△ Less
Submitted 27 April, 2013;
originally announced April 2013.
-
Urban characteristics attributable to density-driven tie formation
Authors:
Wei Pan,
Gourab Ghoshal,
Coco Krumme,
Manuel Cebrian,
Alex Pentland
Abstract:
Motivated by empirical evidence on the interplay between geography, population density and societal interaction, we propose a generative process for the evolution of social structure in cities. Our analytical and simulation results predict both super-linear scaling of social tie density and information flow as a function of the population. We demonstrate that our model provides a robust and accura…
▽ More
Motivated by empirical evidence on the interplay between geography, population density and societal interaction, we propose a generative process for the evolution of social structure in cities. Our analytical and simulation results predict both super-linear scaling of social tie density and information flow as a function of the population. We demonstrate that our model provides a robust and accurate fit for the dependency of city characteristics with city size, ranging from individual-level dyadic interactions (number of acquaintances, volume of communication) to population-level variables (contagious disease rates, patenting activity, economic productivity and crime) without the need to appeal to modularity, specialization, or hierarchy.
△ Less
Submitted 10 June, 2013; v1 submitted 22 October, 2012;
originally announced October 2012.
-
Reconstruction of Arbitrary Biochemical Reaction Networks: A Compressive Sensing Approach
Authors:
Wei Pan,
Ye Yuan,
Guy-Bart Stan
Abstract:
Reconstruction of biochemical reaction networks is a central topic in systems biology which raises crucial theoretical challenges in system identification. Nonlinear Ordinary Differential Equations (ODEs) that involve polynomial and rational functions are typically used to model biochemical reaction networks. Such nonlinear models make the problem of determining the connectivity of biochemical net…
▽ More
Reconstruction of biochemical reaction networks is a central topic in systems biology which raises crucial theoretical challenges in system identification. Nonlinear Ordinary Differential Equations (ODEs) that involve polynomial and rational functions are typically used to model biochemical reaction networks. Such nonlinear models make the problem of determining the connectivity of biochemical networks from time-series experimental data quite difficult. In this paper, we present a network reconstruction algorithm that can deal with model descriptions under the form of polynomial and rational functions. Rather than identifying the parameters of linear or nonlinear ODEs characterised by pre-defined equation structures, our methodology allows us to determine the nonlinear ODEs structure together with their associated reaction constants. To solve the network reconstruction problem, we cast it as a Compressive Sensing (CS) problem and use Bayesian Sparse Learning (BSL) algorithms as an efficient way to obtain its solution.
△ Less
Submitted 15 May, 2012; v1 submitted 8 May, 2012;
originally announced May 2012.
-
Trends Prediction Using Social Diffusion Models
Authors:
Yaniv Altshuler,
Wei Pan,
Alex Pentland
Abstract:
The importance of the ability of predict trends in social media has been growing rapidly in the past few years with the growing dominance of social media in our everyday's life. Whereas many works focus on the detection of anomalies in networks, there exist little theoretical work on the prediction of the likelihood of anomalous network pattern to globally spread and become "trends". In this work…
▽ More
The importance of the ability of predict trends in social media has been growing rapidly in the past few years with the growing dominance of social media in our everyday's life. Whereas many works focus on the detection of anomalies in networks, there exist little theoretical work on the prediction of the likelihood of anomalous network pattern to globally spread and become "trends". In this work we present an analytic model the social diffusion dynamics of spreading network patterns. Our proposed method is based on information diffusion models, and is capable of predicting future trends based on the analysis of past social interactions between the community's members. We present an analytic lower bound for the probability that emerging trends would successful spread through the network. We demonstrate our model using two comprehensive social datasets - the "Friends and Family" experiment that was held in MIT for over a year, where the complete activity of 140 users was analyzed, and a financial dataset containing the complete activities of over 1.5 million members of the "eToro" social trading community.
△ Less
Submitted 20 November, 2011;
originally announced November 2011.