Measurement of optical to electrical and electrical to optical delays with ps-level uncertainty
Authors:
H. Z. Peek,
T. J. Pinkert,
P. P. M. Jansweijer,
J. C. J. Koelemeij
Abstract:
We present a new measurement principle to determine the absolute time delay of a waveform from an optical reference plane to an electrical reference plane and vice versa. We demonstrate a method based on this principle with 2 ps uncertainty. This method can be used to perform accurate time delay determinations of optical transceivers used in fibre-optic time-dissemination equipment. As a result th…
▽ More
We present a new measurement principle to determine the absolute time delay of a waveform from an optical reference plane to an electrical reference plane and vice versa. We demonstrate a method based on this principle with 2 ps uncertainty. This method can be used to perform accurate time delay determinations of optical transceivers used in fibre-optic time-dissemination equipment. As a result the time scales in optical and electrical domain can be related to each other with the same uncertainty. We expect this method to break new grounds in high-accuracy time transfer and absolute calibration of time-transfer equipment.
△ Less
Submitted 21 February, 2018;
originally announced February 2018.
Measurement of mechanical vibrations excited in aluminium resonators by 0.6 GeV electrons
Authors:
G. D. van Albada,
E. Coccia,
V. Fafone,
H. van der Graaf,
G. Heijboer,
J. W. van Holten,
W. J. Kasdorp,
J. B. van der Laan,
L. Lapikas,
G. Mazzitelli,
G. J. L. Nooren,
C. W. J. Noteboom,
J. E. J. Oberski,
G. Pallottino,
H. Z. Peek,
F. Ronga,
A. Schimmel,
T. G. B. W. Sluijk,
P. Steman,
J. Venema,
P. K. A. de Witt Huberts
Abstract:
We present measurements of mechanical vibrations induced by 0.6 GeV electrons impinging on cylindrical and spherical aluminium resonators. To monitor the amplitude of the resonator's vibrational modes we used piezoelectric ceramic sensors, calibrated by standard accelerometers. Calculations using the thermo-acoustic conversion model, agree well with the experimental data, as demonstrated by the…
▽ More
We present measurements of mechanical vibrations induced by 0.6 GeV electrons impinging on cylindrical and spherical aluminium resonators. To monitor the amplitude of the resonator's vibrational modes we used piezoelectric ceramic sensors, calibrated by standard accelerometers. Calculations using the thermo-acoustic conversion model, agree well with the experimental data, as demonstrated by the specific variation of the excitation strengths with the absorbed energy, and with the traversing particles' track positions. For the first longitudinal mode of the cylindrical resonator we measured a conversion factor of 7.4 +- 1.4 nm/J, confirming the model value of 10 nm/J. Also, for the spherical resonator, we found the model values for the L=2 and L=1 mode amplitudes to be consistent with our measurement. We thus have confirmed the applicability of the model, and we note that calculations based on the model have shown that next generation resonant mass gravitational wave detectors can only be expected to reach their intended ultra high sensitivity if they will be shielded by an appreciable amount of rock, where a veto detector can reduce the background of remaining impinging cosmic rays effectively.
△ Less
Submitted 11 January, 2000;
originally announced January 2000.