Showing 1–19 of 19 results for author: Pelz, P

Analytical and numerical validation of a plate-plate tribometer for measuring wall slip

Authors: Muhammad Hassan Asghar, Tomislav Maric, Houssem Ben Gozlen, Suraj Raju, Mathis Fricke, Maximilian Kuhr, Peter F. Pelz, Dieter Bothe

Abstract: We model the Darmstadt Slip Length Tribometer (DSLT), specially designed to measure viscosity and slip length simultaneously for lubrication gaps in the range of approximately 10 micrometres at relevant temperatures and surface roughness. We investigate the inlet effect of the flow on the results by varying the inner radius of the fluid inlet pipe. The outcomes of numerical simulations suggest tha… ▽ More We model the Darmstadt Slip Length Tribometer (DSLT), specially designed to measure viscosity and slip length simultaneously for lubrication gaps in the range of approximately 10 micrometres at relevant temperatures and surface roughness. We investigate the inlet effect of the flow on the results by varying the inner radius of the fluid inlet pipe. The outcomes of numerical simulations suggest that variations in the diameter of this inner radius have minimal impact on the results. Specifically, any alterations in the velocity profile near the inlet, brought about by changes in the diameter, quickly revert to the profile predicted by the analytical model. The main conclusion drawn from this study is the validation of the Navier-Slip boundary condition as an effective model for technical surface roughness in CFD simulations and the negligible influence of the inlet effect on the fluid dynamics between the tribometer's plates. △ Less

Submitted 17 November, 2023; originally announced November 2023.

High-resolution 3D phase-contrast imaging beyond the depth of field limit via ptychographic multi-slice electron tomography

Authors: Andrey Romanov, Min Gee Cho, Mary Cooper Scott, Colin Ophus, Philipp Pelz

Abstract: Resolving single atoms in large-scale volumes has been a goal for atomic resolution microscopy for a long time. Electron microscopy has come close to this goal using a combination of advanced electron optics and computational imaging algorithms. However, atomic-resolution 3D imaging in volumes larger than the depth of field limit of the electron optics has so far been out of reach. Electron ptycho… ▽ More Resolving single atoms in large-scale volumes has been a goal for atomic resolution microscopy for a long time. Electron microscopy has come close to this goal using a combination of advanced electron optics and computational imaging algorithms. However, atomic-resolution 3D imaging in volumes larger than the depth of field limit of the electron optics has so far been out of reach. Electron ptychography, a computational imaging method allowing to solve the multiple-scattering problem from position- and momentum-resolved measurements, provides the opportunity to surpass this limit. Here, we experimentally demonstrate atomic resolution three-dimensional phase-contrast imaging in a volume surpassing the depth of field limits using multi-slice ptychographic electron tomography. We reconstruct tilt-series 4D-STEM measurements of a Co3O4 nanocube, yielding 1.75 Å resolution in a reconstructed volume of (18.2nm)^3. △ Less

Submitted 5 November, 2023; originally announced November 2023.

Comments: 15 pages

The 4D Camera: an 87 kHzきろへるつ direct electron detector for scanning/transmission electron microscopy

Authors: Peter Ercius, Ian J. Johnson, Philipp Pelz, Benjamin H. Savitzky, Lauren Hughes, Hamish G. Brown, Steven E. Zeltmann, Shang-Lin Hsu, Cassio C. S. Pedroso, Bruce E. Cohen, Ramamoorthy Ramesh, David Paul, John M. Joseph, Thorsten Stezelberger, Cory Czarnik, Matthew Lent, Erin Fong, Jim Ciston, Mary C. Scott, Colin Ophus, Andrew M. Minor, and Peter Denes

Abstract: We describe the development, operation, and application of the 4D Camera -- a 576 by 576 pixel active pixel sensor for scanning/transmission electron microscopy which operates at 87,000 Hzへるつ. The detector generates data at approximately 480 Gbit/s which is captured by dedicated receiver computers with a parallelized software infrastructure that has been implemented to process the resulting 10 - 700… ▽ More We describe the development, operation, and application of the 4D Camera -- a 576 by 576 pixel active pixel sensor for scanning/transmission electron microscopy which operates at 87,000 Hzへるつ. The detector generates data at approximately 480 Gbit/s which is captured by dedicated receiver computers with a parallelized software infrastructure that has been implemented to process the resulting 10 - 700 Gigabyte-sized raw datasets. The back illuminated detector provides the ability to detect single electron events at accelerating voltages from 30 - 300 keV. Through electron counting, the resulting sparse data sets are reduced in size by 10 - 300x compared to the raw data, and open-source sparsity-based processing algorithms offer rapid data analysis. The high frame rate allows for large and complex 4D-STEM experiments to be accomplished with typical STEM scanning parameters. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Imaging the electron charge density in monolayer MoS2 at the Ångstrom scale

Authors: Joel Martis, Sandhya Susarla, Archith Rayabharam, Cong Su, Timothy Paule, Philipp Pelz, Cassandra Huff, Xintong Xu, Hao-Kun Li, Marc Jaikissoon, Victoria Chen, Eric Pop, Krishna Saraswat, Alex Zettl, Narayana R. Aluru, Ramamoorthy Ramesh, Peter Ercius, Arun Majumdar

Abstract: Four-dimensional scanning transmission electron microscopy (4D-STEM) has recently gained widespread attention for its ability to image atomic electric fields with sub-Ångstrom spatial resolution. These electric field maps represent the integrated effect of the nucleus, core electrons and valence electrons, and separating their contributions is non-trivial. In this paper, we utilized simultaneously… ▽ More Four-dimensional scanning transmission electron microscopy (4D-STEM) has recently gained widespread attention for its ability to image atomic electric fields with sub-Ångstrom spatial resolution. These electric field maps represent the integrated effect of the nucleus, core electrons and valence electrons, and separating their contributions is non-trivial. In this paper, we utilized simultaneously acquired 4D-STEM center of mass (CoM) images and annular dark field (ADF) images to determine the electron charge density in monolayer MoS2. We find that both the core electrons and the valence electrons contribute to the derived electron charge density. However, due to blurring by the probe shape, the valence electron contribution forms a nearly featureless background while most of the spatial modulation comes from the core electrons. Our findings highlight the importance of probe shape in interpreting charge densities derived from 4D STEM. △ Less

Submitted 31 July, 2023; v1 submitted 17 October, 2022; originally announced October 2022.

Journal ref: Nature Communications 14(1) (2023) 1-8

Solving Complex Nanostructures With Ptychographic Atomic Electron Tomography

Authors: Philipp M Pelz, Sinead Griffin, Scott Stonemeyer, Derek Popple, Hannah Devyldere, Peter Ercius, Alex Zettl, Mary C Scott, Colin Ophus

Abstract: Transmission electron microscopy (TEM) is a potent technique for the determination of three-dimensional atomic scale structure of samples in structural biology and materials science. In structural biology, three-dimensional structures of proteins are routinely determined using phase-contrast single-particle cryo-electron microscopy from thousands of identical proteins, and reconstructions have rea… ▽ More Transmission electron microscopy (TEM) is a potent technique for the determination of three-dimensional atomic scale structure of samples in structural biology and materials science. In structural biology, three-dimensional structures of proteins are routinely determined using phase-contrast single-particle cryo-electron microscopy from thousands of identical proteins, and reconstructions have reached atomic resolution for specific proteins. In materials science, three-dimensional atomic structures of complex nanomaterials have been determined using a combination of annular dark field (ADF) scanning transmission electron microscopic (STEM) tomography and subpixel localization of atomic peaks, in a method termed atomic electron tomography (AET). However, neither of these methods can determine the three-dimensional atomic structure of heterogeneous nanomaterials containing light elements. Here, we perform mixed-state electron ptychography from 34.5 million diffraction patterns to reconstruct a high-resolution tilt series of a double wall-carbon nanotube (DW-CNT), encapsulating a complex $\mathrm{ZrTe}$ sandwich structure. Class averaging of the resulting reconstructions and subpixel localization of the atomic peaks in the reconstructed volume reveals the complex three-dimensional atomic structure of the core-shell heterostructure with 17 picometer precision. From these measurements, we solve the full $\mathrm{Zr_{11}Te_{50}}$ structure, which contains a previously unobserved $\mathrm{ZrTe_{2}}$ phase in the core. The experimental realization of ptychographic atomic electron tomography (PAET) will allow for structural determination of a wide range of nanomaterials which are beam-sensitive or contain light elements. △ Less

Submitted 17 June, 2022; originally announced June 2022.

Comments: 17 pages 3 figures in main text, 7 figures in supplementary materials

The Activation Energy for Wall Slip

Authors: Peter F. Pelz, Tobias Corneli

Abstract: The Navier slip boundary condition is interpreted as an equilibrium of shear rate and slip rate. From the argument that the slip rate shall be proportional to the molecules' collision rate, the temperature dependence of the Navier slip boundary condition is derived. The model for the temperature dependence of the slip length is validated by slip measurements of liquid hydrocarbons in a novel Couet… ▽ More The Navier slip boundary condition is interpreted as an equilibrium of shear rate and slip rate. From the argument that the slip rate shall be proportional to the molecules' collision rate, the temperature dependence of the Navier slip boundary condition is derived. The model for the temperature dependence of the slip length is validated by slip measurements of liquid hydrocarbons in a novel Couette typ tribometer being introduced. The essence of the gained experimental data for one fluid-solid-interface is the quadruple activation energy for shear and wall slip together with the viscosity and slip length at a reference temperature. This quadruple is determined for four different hydrocarbon liquids of different molecular mass, structure and polarity proving the applicability of the new measurement method. From the executed systematic measurements three conclusions regarding the slip length dependence are pointed out: (i) the slip length increases with increasing molar mass; (ii) changing the molecular structure from saturated hydrocarbon to unsaturated affects the slip length as well as the activation energy for slip; (iii) adding a small fraction of polar molecules to the hydrocarbon decreases the slip length and increases the activation energy for wall slip due to the polar end-groups of the liquid. △ Less

Submitted 18 November, 2021; originally announced November 2021.

Comments: The paper was submitted to Physical Review Letters in May 2018 as a revised version of the manuscript no. LJ15692 submitted to the same journal in September 2017

Dynamic force and torque characteristic of annular gaps -- Simulation results and evaluation of the relevance of the tilt and torque coefficients

Authors: Maximilian M. G. Kuhr, Rainer Nordmann, Peter F. Pelz

Abstract: We discuss the dynamic force and torque characteristic of annular gaps resulting from an axial flow component. First, the rotordynamic influence of annular gaps with an axial flow component is recapitulated. So far there is a severe lack of understanding the dynamic force and torque characteristic of annular gaps. Second, a new simulation method is presented, using a perturbed integro-differential… ▽ More We discuss the dynamic force and torque characteristic of annular gaps resulting from an axial flow component. First, the rotordynamic influence of annular gaps with an axial flow component is recapitulated. So far there is a severe lack of understanding the dynamic force and torque characteristic of annular gaps. Second, a new simulation method is presented, using a perturbed integro-differential approach in combination with power-law ansatz functions for the velocity profiles and a Hirs' model to calculate the dynamic force and torque characteristics. Third, an extensive parameter study is carried out. To evaluate whether or not the hydraulic tilt and torque coefficients need to be taken into account, an effective stiffness is defined and the influence of the annulus length, an eccentrically operated shaft, the centre of rotation, a modified Reynolds number, the flow number and the pre-swirl is investigated. △ Less

Submitted 17 December, 2021; v1 submitted 12 November, 2021; originally announced November 2021.

Comments: Parts of the introduction are rewritten. Layout of the pre-print was changed

Static force characteristic of annular gaps -- Experimental and simulation results

Authors: Maximilian M. G. Kuhr, Sebastian R. Lang, Peter F. Pelz

Abstract: We discuss the static force characteristic of annular gaps resulting from an axial flow component. So far there is a severe lack of understanding of the flow inside the annulus. First, the state-of-the-art modelling approaches to describe the flow inside the annulus are recapped and discussed. The discussion focuses in particular on the modelling of inertia effects. Second, a new calculation metho… ▽ More We discuss the static force characteristic of annular gaps resulting from an axial flow component. So far there is a severe lack of understanding of the flow inside the annulus. First, the state-of-the-art modelling approaches to describe the flow inside the annulus are recapped and discussed. The discussion focuses in particular on the modelling of inertia effects. Second, a new calculation method, the Clearance-Averaged Pressure Model (CAPM) is presented. The CAPM uses an integro-differential approach in combination with power law ansatz functions for the velocity profiles and a Hirs' model to calculate the resulting pressure field. Third, for experimental validation, a setup is presented using magnetic bearings to inherently measure the position as well as the force on the rotor induced by the flow field inside the gap. The experiments focus on the characteristic load behaviour, attitude angle and pressure difference across the annulus. Fourth, the experimental results are compared to the calculation results. △ Less

Submitted 17 December, 2021; v1 submitted 12 November, 2021; originally announced November 2021.

Comments: Pre-validation chapter was added. Order of magnitude analysis for the hydrodynamic entrance length was added in chapter II. Layout of the pre-print was changed

Simultaneous Successive Twinning Captured by Atomic Electron Tomography

Authors: Phillip M. Pelz, Catherine K. Groschner, Alexandra Bruefach, Adam Satariano, Colin Ophus, M. C. Scott

Abstract: Shape-controlled synthesis of multiply twinned nanostructures is heavily emphasized in nanoscience, in large part due to the desire to control the size, shape, and terminating facets of metal nanoparticles for applications in catalysis. Direct control of the size and shape of solution-grown nanoparticles relies on an understanding of how synthetic parameters alter nanoparticle structures during sy… ▽ More Shape-controlled synthesis of multiply twinned nanostructures is heavily emphasized in nanoscience, in large part due to the desire to control the size, shape, and terminating facets of metal nanoparticles for applications in catalysis. Direct control of the size and shape of solution-grown nanoparticles relies on an understanding of how synthetic parameters alter nanoparticle structures during synthesis. However, while outcome populations can be effectively studied with standard electron microscopy methods, transient structures that appear during some synthetic routes are difficult to study using conventional high resolution imaging methods due to the high complexity of the 3D nanostructures. Here, we have studied the prevalence of transient structures during growth of multiply twinned particles and employed atomic electron tomography to reveal the atomic-scale three dimensional structure of a Pd nanoparticle undergoing a shape transition. By identifying over 20,000 atoms within the structure and classifying them according to their local crystallographic environment, we observe a multiply-twinned structure consistent with a simultaneous successive twinning from a decahedral to icosahedral structure. We also observe a high degree of structural disorder in the nanoparticle, and a disordered crystal structure on the particle surface. Our results shed light on the transition mechanism for formation of icosahedral nanoparticle structures. △ Less

Submitted 14 September, 2021; originally announced September 2021.

Challenges in identifying simple pattern-forming mechanisms in the development of settlements using demographic data

Authors: Bartosz Prokop, Lendert Gelens, Peter F. Pelz, John Friesen

Abstract: The rapid increase of population and settlement structures in the Global South during recent decades motivates the development of suitable models to describe their formation and evolution. Such settlement formation has been previously suggested to be dynamically driven by simple pattern-forming mechanisms. Here, we explore the use of a data-driven white-box approach, called SINDy, to discover diff… ▽ More The rapid increase of population and settlement structures in the Global South during recent decades motivates the development of suitable models to describe their formation and evolution. Such settlement formation has been previously suggested to be dynamically driven by simple pattern-forming mechanisms. Here, we explore the use of a data-driven white-box approach, called SINDy, to discover differential equation models directly from available spatiotemporal demographic data for three representative regions of the Global South. We show that the current resolution and observation time of the available data is insufficient to uncover relevant pattern-forming mechanisms in settlement development. Using synthetic data generated with a generic pattern-forming model, the Allen-Cahn equation, we characterize what the requirements are on spatial and temporal resolution, as well as observation time, to successfully identify possible model system equations. Overall, the study provides a theoretical framework for the analysis of large-scale geographical/ecological systems, and it motivates further improvements in optimization approaches and data collection. △ Less

Submitted 14 April, 2023; v1 submitted 3 August, 2021; originally announced August 2021.

Comments: 13 pages, 8 figures

Real-time interactive 4D-STEM phase-contrast imaging from electron event representation data

Authors: Philipp M. Pelz, Ian Johnson, Colin Ophus, Peter Ercius, Mary C. Scott

Abstract: The arrival of direct electron detectors (DED) with high frame-rates in the field of scanning transmission electron microscopy has enabled many experimental techniques that require collection of a full diffraction pattern at each scan position, a field which is subsumed under the name four dimensional-scanning transmission electron microscopy (4D-STEM). DED frame rates approaching 100 kHzきろへるつ require… ▽ More The arrival of direct electron detectors (DED) with high frame-rates in the field of scanning transmission electron microscopy has enabled many experimental techniques that require collection of a full diffraction pattern at each scan position, a field which is subsumed under the name four dimensional-scanning transmission electron microscopy (4D-STEM). DED frame rates approaching 100 kHzきろへるつ require data transmission rates and data storage capabilities that exceed commonly available computing infrastructure. Current commercial DEDs allow the user to make compromises in pixel bit depth, detector binning or windowing to reduce the per-frame file size and allow higher frame rates. This change in detector specifications requires decisions to be made before data acquisition that may reduce or lose information that could have been advantageous during data analysis. The 4D Camera, a DED with 87 kHzきろへるつ frame-rate developed at Lawrence Berkeley National Laboratory, reduces the raw data to a linear-index encoded electron event representation (EER). Here we show with experimental data from the 4D Camera that linear-index encoded EER and its direct use in 4D-STEM phase contrast imaging methods enables real-time, interactive phase-contrast from large-area 4D-STEM datasets. We detail the computational complexity advantages of the EER and the necessary computational steps to achieve real-time interactive ptychography and center-of-mass differential phase contrast using commonly available hardware accelerators. △ Less

Submitted 13 April, 2021; originally announced April 2021.

Comments: 11 pages

A Fast Algorithm for Scanning Transmission Electron Microscopy (STEM) Imaging and 4D-STEM Diffraction Simulations

Authors: Philipp M Pelz, Alexander Rakowski, Luis Rangel DaCosta, Benjamin H Savitzky, Mary C Scott, Colin Ophus

Abstract: Scanning transmission electron microscopy (STEM) is an extremely versatile method for studying materials on the atomic scale. Many STEM experiments are supported or validated with electron scattering simulations. However, using the conventional multislice algorithm to perform these simulations can require extremely large calculation times, particularly for experiments with millions of probe positi… ▽ More Scanning transmission electron microscopy (STEM) is an extremely versatile method for studying materials on the atomic scale. Many STEM experiments are supported or validated with electron scattering simulations. However, using the conventional multislice algorithm to perform these simulations can require extremely large calculation times, particularly for experiments with millions of probe positions as each probe position must be simulated independently. Recently, the PRISM algorithm was developed to reduce calculation times for large STEM simulations. Here, we introduce a new method for STEM simulation: partitioning of the STEM probe into "beamlets," given by a natural neighbor interpolation of the parent beams. This idea is compatible with PRISM simulations and can lead to even larger improvements in simulation time, as well requiring significantly less computer RAM. We have performed various simulations to demonstrate the advantages and disadvantages of partitioned PRISM STEM simulations. We find that this new algorithm is particularly useful for 4D-STEM simulations of large fields of view. We also provide a reference implementation of the multislice, PRISM and partitioned PRISM algorithms. △ Less

Submitted 3 April, 2021; originally announced April 2021.

Comments: 15 pages, 7 figures

Scalable multicomponent spectral analysis for high-throughput data annotation

Authors: Rui Patrick Xian, Ralph Ernstorfer, Philipp Michael Pelz

Abstract: Orchestrating parametric fitting of multicomponent spectra at scale is an essential yet underappreciated task in high-throughput quantification of materials and chemical composition. To automate the annotation process for spectroscopic and diffraction data collected in counts of hundreds to thousands, we present a systematic approach compatible with high-performance computing infrastructures using… ▽ More Orchestrating parametric fitting of multicomponent spectra at scale is an essential yet underappreciated task in high-throughput quantification of materials and chemical composition. To automate the annotation process for spectroscopic and diffraction data collected in counts of hundreds to thousands, we present a systematic approach compatible with high-performance computing infrastructures using the MapReduce model and task-based parallelization. We implement the approach in software and demonstrate linear computational scaling with respect to spectral components using multidimensional experimental materials characterization datasets from photoemission spectroscopy and powder electron diffraction as benchmarks. Our approach enables efficient generation of high-quality data annotation and online spectral analysis and is applicable to a variety of analytical techniques in materials science and chemistry as a building block for closed-loop experimental systems. △ Less

Submitted 29 March, 2021; v1 submitted 10 February, 2021; originally announced February 2021.

Effects of Unsteady Heat Transfer on Behaviour of Commercial Hydro-Pneumatic Accumulators

Authors: Jakob Hartig, Benedict Depp, Manuel Rexer, Peter F. Pelz

Abstract: Hydraulic accumulators play a central role as energy storage in nearly all fluid power systems. The accumulators serve as pulsation dampers or energy storage devices in hydro-pneumatic suspensions. The energy carrying gas is compressed and decompressed, often periodically. Heat transfer to the outside significantly determines the transfer behaviour of the accumulator since heat transfer changes th… ▽ More Hydraulic accumulators play a central role as energy storage in nearly all fluid power systems. The accumulators serve as pulsation dampers or energy storage devices in hydro-pneumatic suspensions. The energy carrying gas is compressed and decompressed, often periodically. Heat transfer to the outside significantly determines the transfer behaviour of the accumulator since heat transfer changes the thermodynamic state of the enclosed gas. The accumulators operating mode ranges from isothermal to adiabatic. Simulating fluid power systems adequately requires knowledge of the transfer behaviour of the accumulators and therefore of the heat transfer. The Engineer's approach to model heat transfer in technical system is Newton's law. However, research shows, that in harmonically oscillating gas volumes, heat flux and bulk temperature difference change their phase. Newton's law is incapable of representing this physical phenomenon. We performed measurements on two sizes of commercial membrane accumulators. Experimental data confirm the failure of Newton's approach. Instead the heat transfer can be modelled with an additional rate dependent term and independently of the accumulator's size. Correlation equations for the heat transfer and the correct accumulator transfer behaviour are given. △ Less

Submitted 11 December, 2020; originally announced December 2020.

Comments: 23 pages, 10 figures

Comparison of existing aneurysm models and their path forward

Authors: John Friesen, Jonas Bergner, Mohammad Ibrahim Aftab Khan, Stefan Triess, Andreas Zoll, Peter F. Pelz, Farzin Adili

Abstract: The two most important aneurysm types are cerebral aneurysms (CA) and abdominal aortic aneurysms (AAA), accounting together for over 80\% of all fatal aneurysm incidences. To minimise aneurysm related deaths, clinicians require various tools to accurately estimate its rupture risk. For both aneurysm types, the current state-of-the-art tools to evaluate rupture risk are identified and evaluated in… ▽ More The two most important aneurysm types are cerebral aneurysms (CA) and abdominal aortic aneurysms (AAA), accounting together for over 80\% of all fatal aneurysm incidences. To minimise aneurysm related deaths, clinicians require various tools to accurately estimate its rupture risk. For both aneurysm types, the current state-of-the-art tools to evaluate rupture risk are identified and evaluated in terms of clinical applicability. We perform a comprehensive literature review, using the Web of Science database. Identified records (3127) are clustered by modelling approach and aneurysm location in a meta-analysis to quantify scientific relevance and to extract modelling patterns and further assessed according to PRISMA guidelines (179 full text screens). Beside general differences and similarities of CA and AAA, we identify and systematically evaluate four major modelling approaches on aneurysm rupture risk: finite element analysis and computational fluid dynamics as deterministic approaches and machine learning and assessment-tools and dimensionless parameters as stochastic approaches. The latter score highest in the evaluation for their potential as clinical applications for rupture prediction, due to readiness level and user friendliness. Deterministic approaches are less likely to be applied in a clinical environment because of their high model complexity. Because deterministic approaches consider underlying mechanism for aneurysm rupture, they have improved capability to account for unusual patient-specific characteristics, compared to stochastic approaches. We show that an increased interdisciplinary exchange between specialists can boost comprehension of this disease to design tools for a clinical environment. By combining deterministic and stochastic models, advantages of both approaches can improve accessibility for clinicians and prediction quality for rupture risk. △ Less

Submitted 1 October, 2020; originally announced October 2020.

Comments: 46 pages, 5 figures

Reconstructing the Scattering Matrix from Scanning Electron Diffraction Measurements Alone

Authors: Philipp M Pelz, Hamish G Brown, Jim Ciston, Scott D Findlay, Yaqian Zhang, Mary Scott, Colin Ophus

Abstract: Three-dimensional phase contrast imaging of multiply-scattering samples in X-ray and electron microscopy is extremely challenging, due to small numerical apertures, the unavailability of wavefront shaping optics, and the highly nonlinear inversion required from intensity-only measurements. In this work, we present a new algorithm using the scattering matrix formalism to solve the scattering from a… ▽ More Three-dimensional phase contrast imaging of multiply-scattering samples in X-ray and electron microscopy is extremely challenging, due to small numerical apertures, the unavailability of wavefront shaping optics, and the highly nonlinear inversion required from intensity-only measurements. In this work, we present a new algorithm using the scattering matrix formalism to solve the scattering from a non-crystalline medium from scanning diffraction measurements, and recover the illumination aberrations. Our method will enable 3D imaging and materials characterization at high resolution for a wide range of materials. △ Less

Submitted 28 August, 2020; originally announced August 2020.

Journal ref: Phys. Rev. Research 3, 023159 (2021)

Diffusion-driven demographics -- Turing model as a concept for the emergence of sedentism

Authors: John Friesen, Jakob Hartig, Katharina Henn, Peter F. Pelz

Abstract: Sedentism was a decisive moment in the history of humankind. In a review article Kay and Kaplan quantified land use for early human settlements and found that sedentism and the emergence of farming go hand in hand. For these settlements two primary land use categories, farming and living, can be identified, whereas for hunter gatherer societies no distinct differences can be made. It is natural to… ▽ More Sedentism was a decisive moment in the history of humankind. In a review article Kay and Kaplan quantified land use for early human settlements and found that sedentism and the emergence of farming go hand in hand. For these settlements two primary land use categories, farming and living, can be identified, whereas for hunter gatherer societies no distinct differences can be made. It is natural to search for this in the behavior of two different groups, settlers and farmers. The development of two distinct zones and the two groups lead us to the hypothesis that the emergence of settlements is the result of diffusion-driven Turing instability. In this short communication we further specify this and show that this results in a regular settlement arrangement as can still be seen today in agricultural regions. △ Less

Submitted 11 May, 2020; originally announced May 2020.

Comments: 5 pages, short communication, 2 figures

py4DSTEM: a software package for multimodal analysis of four-dimensional scanning transmission electron microscopy datasets

Authors: Benjamin H Savitzky, Lauren A Hughes, Steven E Zeltmann, Hamish G Brown, Shiteng Zhao, Philipp M Pelz, Edward S Barnard, Jennifer Donohue, Luis Rangel DaCosta, Thomas C. Pekin, Ellis Kennedy, Matthew T Janish, Matthew M Schneider, Patrick Herring, Chirranjeevi Gopal, Abraham Anapolsky, Peter Ercius, Mary Scott, Jim Ciston, Andrew M Minor, Colin Ophus

Abstract: Scanning transmission electron microscopy (STEM) allows for imaging, diffraction, and spectroscopy of materials on length scales ranging from microns to atoms. By using a high-speed, direct electron detector, it is now possible to record a full 2D image of the diffracted electron beam at each probe position, typically a 2D grid of probe positions. These 4D-STEM datasets are rich in information, in… ▽ More Scanning transmission electron microscopy (STEM) allows for imaging, diffraction, and spectroscopy of materials on length scales ranging from microns to atoms. By using a high-speed, direct electron detector, it is now possible to record a full 2D image of the diffracted electron beam at each probe position, typically a 2D grid of probe positions. These 4D-STEM datasets are rich in information, including signatures of the local structure, orientation, deformation, electromagnetic fields and other sample-dependent properties. However, extracting this information requires complex analysis pipelines, from data wrangling to calibration to analysis to visualization, all while maintaining robustness against imaging distortions and artifacts. In this paper, we present py4DSTEM, an analysis toolkit for measuring material properties from 4D-STEM datasets, written in the Python language and released with an open source license. We describe the algorithmic steps for dataset calibration and various 4D-STEM property measurements in detail, and present results from several experimental datasets. We have also implemented a simple and universal file format appropriate for electron microscopy data in py4DSTEM, which uses the open source HDF5 standard. We hope this tool will benefit the research community, helps to move the developing standards for data and computational methods in electron microscopy, and invite the community to contribute to this ongoing, fully open-source project. △ Less

Submitted 20 March, 2020; originally announced March 2020.

Comments: 32 pages, 18 figures

Low-dose cryo electron ptychography via non-convex Bayesian optimization

Authors: Philipp Michael Pelz, Wen Xuan Qiu, Robert Bücker, Günther Kassier, R. J. Dwayne Miller

Abstract: Electron ptychography has seen a recent surge of interest for phase sensitive imaging at atomic or near-atomic resolution. However, applications are so far mainly limited to radiation-hard samples because the required doses are too high for imaging biological samples at high resolution. We propose the use of non-convex, Bayesian optimization to overcome this problem and reduce the dose required fo… ▽ More Electron ptychography has seen a recent surge of interest for phase sensitive imaging at atomic or near-atomic resolution. However, applications are so far mainly limited to radiation-hard samples because the required doses are too high for imaging biological samples at high resolution. We propose the use of non-convex, Bayesian optimization to overcome this problem and reduce the dose required for successful reconstruction by two orders of magnitude compared to previous experiments. We suggest to use this method for imaging single biological macromolecules at cryogenic temperatures and demonstrate 2D single-particle reconstructions from simulated data with a resolution of 7.9 Å$\,$ at a dose of 20 $e^- / Å^2$. When averaging over only 15 low-dose datasets, a resolution of 4 Å$\,$ is possible for large macromolecular complexes. With its independence from microscope transfer function, direct recovery of phase contrast and better scaling of signal-to-noise ratio, cryo-electron ptychography may become a promising alternative to Zernike phase-contrast microscopy. △ Less

Submitted 19 February, 2017; originally announced February 2017.