-
D retention and material defects probed using Raman microscopy in JET limiter samples and beryllium-based synthesized samples
Authors:
C Pardanaud,
M Kumar,
P Roubin,
C Martin,
Y Ferro,
J Denis,
A Widdowson,
D Douai,
M Baldwin,
A Založnik,
C Lungu,
C Porosnicu,
P Dinca,
T Dittmar,
A Hakola
Abstract:
We report on the detection by means of Raman spectroscopy of amorphous beryllium deuteride, BeD 2 , in magnetron sputtered deposits synthesized in two different laboratories and containing about 20 at.% of deuterium. In contrast, this signature has not been found for the JET limiter samples studied coming from the inner, outer or upper limiters, even when coming from a deposition zone of the limit…
▽ More
We report on the detection by means of Raman spectroscopy of amorphous beryllium deuteride, BeD 2 , in magnetron sputtered deposits synthesized in two different laboratories and containing about 20 at.% of deuterium. In contrast, this signature has not been found for the JET limiter samples studied coming from the inner, outer or upper limiters, even when coming from a deposition zone of the limiters. We give a way to disentangle that BeD 2 signature from other signatures falling in the same spectroscopic range and mainly related to other phenomena. We also analyze the Raman characteristics of the JET sample defects. These results could help in the interpretation of D thermal desorption spectra and in future analyses of JET thick Be deposit divertor tiles.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Post-mortem analysis of tungsten plasma facing components in tokamaks: Raman microscopy measurements on compact, porous oxide and nitride films and nanoparticles
Authors:
Cédric Pardanaud,
David Dellasega,
Matteo Passoni,
Céline Martin,
Pascale Roubin,
Younès Addab,
Cécile Arnas,
Lénaïc Couëdel,
Marco Minissale,
Eric Salomon,
Gregory Giacometti,
Alexandre Merlen,
Elodie Bernard,
Rodrigo Mateus,
Eduardo Alves,
Zdravko Siketic,
Iva Bogdanović Radović,
Antti Hakola,
Eurofusion Pfc
Abstract:
Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, p…
▽ More
Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, porous) and nanoparticles and investigate the influence of their morphology on the measured Raman spectra. The amounts of oxygen and/or nitrogen in the films are also investigated. Comparative data are obtained by X-ray Photoelectrons Spectroscopy, Atomic Force Microscopy, Electron Microscopies (Scanning and Transmission), Energy Dispersive X-ray spectroscopy, Time-of-Flight Elastic Recoil Detection Analysis. The power density of the laser beam used to perform Raman microscopy is varied by up to 4 orders of magnitude (0.01-20 mW/$μ$m 2) to investigate thermal stability of films and nanoparticles. As a first result, we give evidence that Raman microscopy is sensitive enough to detect surface native oxides. Secondly, more tungsten oxides are detected in porous materials and nanoparticles than in compact films, and the intensities of the Raman band correlate to their oxygen content. Thirdly, thermal stability of these films (i.e. structural and chemical modification under laser heating) is poor when compact films contain a sufficiently large amount of nitrogen. This finding suggests that nitrogen can be substituted by oxygen during Raman laser induced heating occurring in ambient air. Finally, our methodology can be used to rapidly characterize morphology and chemistry of the samples analyzed, and also to create oxides at the micrometer scale. keywords: PLD, Raman spectroscopy, tungsten oxide, tungsten nitride, plasma wall interaction, laser heating, post-mortem analysis 2
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
Diagnostics of low-pressure hydrogen discharge created in a 13.56 MHz RF plasma reactor
Authors:
J Krištof,
A Annušová,
M Anguš,
P. Veis,
X Yang,
T Angot,
P. Roubin,
G. Cartry
Abstract:
A 13.56 MHz RF discharge in hydrogen was studied within the pressure range of 1-17 10 Pa, and at power range of 400-1000 W. The electron energy distribution function and 18 electron density were measured by a Langmuir probe. The gas temperature was determined by 19 the Fulcher-$α$ system in pure H2, and by the second positive system of nitrogen using N2 as the 20 probing gas. The gas temperature w…
▽ More
A 13.56 MHz RF discharge in hydrogen was studied within the pressure range of 1-17 10 Pa, and at power range of 400-1000 W. The electron energy distribution function and 18 electron density were measured by a Langmuir probe. The gas temperature was determined by 19 the Fulcher-$α$ system in pure H2, and by the second positive system of nitrogen using N2 as the 20 probing gas. The gas temperature was constant and equal to 450 $\pm$ 50 K in the Capacitively 21 Coupled Plasma mode (CCP), and it was increasing with pressure and power in the Inductively 22 Coupled Plasma mode (ICP). Also the vibrational temperature of ground state of hydrogen 23 molecules was determined to be around 3100 and 2000 $\pm$ 500 K in ICP and CCP mode, 24 respectively. The concentration of atomic hydrogen was determined by means of actinometry, 25 either by using Ar (5 %) as the probing gas, or by using H2 as the actinometer in pure hydrogen 26 (Q1 rotational line of Fulcher-$α$ system) The concentration of hydrogen density was increasing 27 with pressure in both modes, but with a dissociation degree slightly higher in the ICP mode (a 28 factor 2). 29 30 Submitted to Physica Scripta 31
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Thermal stability and long term hydrogen/deuterium release from soft to hard amorphous carbon layers analyzed using in-situ Raman spectroscopy. Comparison with Tore Supra deposits
Authors:
C. Pardanaud,
C. Martin,
G. Giacometti,
N. Mellet,
B. Pégourié,
P. Roubin
Abstract:
The thermal stability of 200 nm thick plasma enhanced chemical vapor deposited a-C:H and a-C:D layers ranging from soft to hard layers has been studied and compared to that of deposits collected on the Tore Supra tokamak plasma facing components by means of in-situ Raman spectroscopy. Linear ramp heating and long term isotherms (from several minutes to 21 days) have been performed and correlations…
▽ More
The thermal stability of 200 nm thick plasma enhanced chemical vapor deposited a-C:H and a-C:D layers ranging from soft to hard layers has been studied and compared to that of deposits collected on the Tore Supra tokamak plasma facing components by means of in-situ Raman spectroscopy. Linear ramp heating and long term isotherms (from several minutes to 21 days) have been performed and correlations between spectrometric parameters have been found. The information obtained on the sp 2 clustering has been investigated by comparing the G band shift and the 514 nm photon absorption evolution due to the thermal treatment of the layer. The effects of isotopic substitution have also been investigated.
△ Less
Submitted 7 January, 2015;
originally announced January 2015.
-
Raman microscopy as a defect microprobe for hydrogen bonding characterization in materials used in fusion applications
Authors:
Cédric Pardanaud,
Younès Addab,
Céline Martin,
Pascale Roubin,
Bernard Pegourié,
Martin Oberkofler,
Martin Köppen,
Timo Dittmar,
Christian Linsmeier
Abstract:
We present the Raman microscopy ability to detect and characterize the way hydrogen is bonded with elements that will be used for ITER's plasma facing components. For this purpose we first use hydrogenated amorphous carbon samples, formed subsequently to plasma-wall interactions (hydrogen implantation, erosion, deposition...) occurring inside tokamaks, to demonstrate how this technique can be used…
▽ More
We present the Raman microscopy ability to detect and characterize the way hydrogen is bonded with elements that will be used for ITER's plasma facing components. For this purpose we first use hydrogenated amorphous carbon samples, formed subsequently to plasma-wall interactions (hydrogen implantation, erosion, deposition...) occurring inside tokamaks, to demonstrate how this technique can be used to retrieve useful information. We pay attention in identifying which spectroscopic parameters are sensitive to the local structure (sp 3 /sp 2) and which gives information on the hydrogen content using isothermal and linear temperature ramp studies on reference samples produced by plasma enhanced chemical vapor deposition. We then focus on the possibility to use this fast, non-destructive and non-contact technique to characterize the influence of hydrogen isotope implantation in few nanometers of graphite and beryllium as C is still used in the JT-60 tokamak and Be is used in JET and will be used as plasma-facing component in the future reactor ITER. We also pay attention on implantation in tungsten oxide which may be formed accidently in the machine.
△ Less
Submitted 9 December, 2014;
originally announced December 2014.
-
Unveiling the Surface Structure of Amorphous Solid Water via Selective Infrared Irradiation of OH Stretching Modes
Authors:
Jennifer A Noble,
Céline Martin,
Helen J. Fraser,
Pascale Roubin,
Stéphane Coussan
Abstract:
In the quest to understand the formation of the building blocks of life, amorphous solid water (ASW) is one of the most widely studied molecular systems. Indeed, ASW is ubiquitous in the cold interstellar medium (ISM), where ASW-coated dust grains provide a catalytic surface for solid phase chemistry, and is believed to be present in the Earth's atmosphere at high altitudes. It has been shown that…
▽ More
In the quest to understand the formation of the building blocks of life, amorphous solid water (ASW) is one of the most widely studied molecular systems. Indeed, ASW is ubiquitous in the cold interstellar medium (ISM), where ASW-coated dust grains provide a catalytic surface for solid phase chemistry, and is believed to be present in the Earth's atmosphere at high altitudes. It has been shown that the ice surface adsorbs small molecules such as CO, N$_2$, or CH$_4$, most likely at OH groups dangling from the surface. Our study presents completely new insights concerning the behaviour of ASW upon selective infrared (IR) irradiation of its dangling modes. When irradiated, these surface H$_2$O molecules reorganise, predominantly forming a stabilised monomer-like water mode on the ice surface. We show that we systematically provoke "hole-burning" effects (or net loss of oscillators) at the wavelength of irradiation and reproduce the same absorbed water monomer on the ASW surface. Our study suggests that all dangling modes share one common channel of vibrational relaxation; the ice remains amorphous but with a reduced range of binding sites, and thus an altered catalytic capacity.
△ Less
Submitted 14 February, 2014;
originally announced February 2014.
-
Multiwavelength Raman spectroscopy analysis of a large sampling of disordered carbons extracted from the Tore Supra tokamak
Authors:
Cedric Pardanaud,
C. Martin,
P. Roubin
Abstract:
Disordered carbon often exhibit a complex Raman spectrum, with four to six components. Here, a large variety of disordered carbons, forming a collection of samples with a great variety of structures, are analysed using multi-wavelength Raman microscopy (325.0, 514.5, 785.0 nm). They allow us to extend Raman behaviour known for nano-crystalline graphite to amorphous carbons, (dependence with the ex…
▽ More
Disordered carbon often exhibit a complex Raman spectrum, with four to six components. Here, a large variety of disordered carbons, forming a collection of samples with a great variety of structures, are analysed using multi-wavelength Raman microscopy (325.0, 514.5, 785.0 nm). They allow us to extend Raman behaviour known for nano-crystalline graphite to amorphous carbons, (dependence with the excitation wavelength) and other known for amorphous carbons to nano-crystalline graphite, (differentiation of the smallest cluster size probed using different excitation wavelengths). Experimental spectra were compared to simulated spectra, built using known laws, to evidence a new source of broadening.
△ Less
Submitted 13 January, 2014;
originally announced January 2014.
-
Long Term H-Release from Amorphous Carbon Evidenced by in Situ Raman Microscopy under Isothermal Heating
Authors:
Cedric Pardanaud,
C. Martin,
G. Giacometti,
P. Roubin,
B. Pégourié,
C. Hopf,
T. Schwarz-Selinger,
W. Jacob,
J. G. Buijnsters
Abstract:
We study the kinetics of the H release from plasma-deposited hydrogenated amorphous carbon films under isothermal heating at 450, 500 and 600 {\degree}C for long times up to several days using in situ Raman microscopy. Four Raman parameters are analyzed. They allow the identification of different processes such as the carbon network reorganization and the H release from sp3 or sp2 carbon atoms and…
▽ More
We study the kinetics of the H release from plasma-deposited hydrogenated amorphous carbon films under isothermal heating at 450, 500 and 600 {\degree}C for long times up to several days using in situ Raman microscopy. Four Raman parameters are analyzed. They allow the identification of different processes such as the carbon network reorganization and the H release from sp3 or sp2 carbon atoms and the corresponding timescales. Carbon reorganization with aromatization and loss of sp3 hybridization occurs first in 100 minutes at 500 {\degree}C. The final organization is similar at all investigated temperatures. Full H release from sp3 carbon occurs on a longer timescale of about 10 hours while H release from sp2 carbon atoms is only partial, even after several days. All these processes occur more rapidly with higher initial H content, in agreement with what is known about the stability of these types of films. A quantitative analysis of these kinetics studies gives valuable information about the microscopic processes at the origin of the H release through the determination of activation energies.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Raman spectroscopy investigation of the H content of heated hard amorphous carbon layers
Authors:
Cedric Pardanaud,
C. Martin,
P. Roubin,
G. Giacometti,
C. Hopf,
T. Schwarz-Selinger,
W. Jacob
Abstract:
We revisit here how Raman spectroscopy can be used to estimate the H content in hard hydrogenated amorphous carbon layers. The H content was varied from 2 at.% to 30 at.%, using heat treatments of a a-C:H, from room temperature to 1300 K and was determined independently using ion beam analysis. We examine the correlation of various Raman parameters and the consistency of their thermal evolution wi…
▽ More
We revisit here how Raman spectroscopy can be used to estimate the H content in hard hydrogenated amorphous carbon layers. The H content was varied from 2 at.% to 30 at.%, using heat treatments of a a-C:H, from room temperature to 1300 K and was determined independently using ion beam analysis. We examine the correlation of various Raman parameters and the consistency of their thermal evolution with thermo-desorption results. We identify a weak band at 860 cm-1 attributed to H bonded to C(sp2). We show that the HD/HG parameter (Height ratio between the D and G bands) is quasi-linear in the full range of H content and can thus be used to estimate the H content. Conversely, we show that the m/HG parameter (ratio between the photoluminescence background, m, and the height of the G band), often used to estimate the H content, should be used with care, first because it is sensitive to various photoluminescence quenching processes and second because it is not sensitive to H bonded to C(sp2).
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Raman micro-spectroscopy as a tool to measure the absorption coefficient and the erosion rate of hydrogenated amorphous carbon films heat-treated under hydrogen bombardment
Authors:
Cedric Pardanaud,
E. Aréou,
C. Martin,
R. Ruffe,
T. Angot,
P. Roubin,
C. Hopf,
T. Schwarz-Selinger,
W. Jacob
Abstract:
We present a fast and simple way to determine the erosion rate and absorption coefficient of hydrogenated amorphous carbon films exposed to a hydrogen atomic source based on ex-situ Raman micro-spectroscopy. Results are compared to ellipsometry measurement. The method is applied to films eroded at different temperatures. A maximum of the erosion rate is found at ~ 450 {\degree}C in agreement with…
▽ More
We present a fast and simple way to determine the erosion rate and absorption coefficient of hydrogenated amorphous carbon films exposed to a hydrogen atomic source based on ex-situ Raman micro-spectroscopy. Results are compared to ellipsometry measurement. The method is applied to films eroded at different temperatures. A maximum of the erosion rate is found at ~ 450 {\degree}C in agreement with previous results. This technique is suitable for future quantitative studies on the erosion of thin carbonaceous films, especially of interest for plasma wall interactions occurring in thermonuclear fusion devices.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Raman study of CFC tiles extracted from the toroidal pump limiter of Tore Supra
Authors:
Cedric Pardanaud,
G. Giacometti,
C. Martin,
R. Ruffe,
T. Angot,
E. Aréou,
B. Pégourié,
E. Tsitrone,
T. Dittmar,
C. Hopf,
W. Jacob,
T. Schwarz-Selinger,
P. Roubin
Abstract:
The structure of six tiles extracted from the erosion and deposition zones (thin and thick deposition) of the Tore Supra toroidal pump limiter (TPL) have been analysed in the framework of the DITS campaign using micro-Raman spectroscopy. This post-mortem analysis gives information on both carbon structure and D content. We have found that the carbon structure is most often similar to that of plasm…
▽ More
The structure of six tiles extracted from the erosion and deposition zones (thin and thick deposition) of the Tore Supra toroidal pump limiter (TPL) have been analysed in the framework of the DITS campaign using micro-Raman spectroscopy. This post-mortem analysis gives information on both carbon structure and D content. We have found that the carbon structure is most often similar to that of plasma-deposited hard amorphous carbon layers. The role of the surface temperature during the discharge in the D content is investigated: in all locations where the temperature does not reach more than 500{\degree}C the D content seems to be roughly uniform with D/D+C \approx 20%.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Characterisation of carbon dust produced in sputtering discharges and in the Tore Supra tokamak
Authors:
Cécile Arnas,
Claire Dominique,
Pascale Roubin,
Céline Martin,
Christophe Brosset,
Bernard Pégourié
Abstract:
The sputtering of inside wall components of tokamaks can lead to the injection of supersaturated vapour in the plasma edge. The resulting condensation favours the formation of clusters which can give rise to solid particulates by further accretion. Sputtering discharges are proposed to have highlight on the formation of carbonaceous dust observed in the tokamaks with graphite based wall componen…
▽ More
The sputtering of inside wall components of tokamaks can lead to the injection of supersaturated vapour in the plasma edge. The resulting condensation favours the formation of clusters which can give rise to solid particulates by further accretion. Sputtering discharges are proposed to have highlight on the formation of carbonaceous dust observed in the tokamaks with graphite based wall components. The flux of the sputtered carbon atoms is evaluated in the conditions of our laboratory discharges as well as the evolution of their energy distribution. It is shown that a cooling mechanism occurs through collisions with the discharge argon atoms, leading to a nucleation phase. A comparison between the carbon structure of the resulting dust particles and a dust sample collected in the Tore Supra tokamak is proposed. The structural differences are discussed and can be correlated to specific plasma conditions.
△ Less
Submitted 27 April, 2006;
originally announced April 2006.
