-
Achievement of highly radiating plasma in negative triangularity and effect of reactor-relevant seeded impurities on confinement and transport
Authors:
L. Casali,
D. Eldon,
T. Odstrcil,
R. Mattes,
A. Welsh,
K. Lee,
A. O. Nelson,
C. Paz-Soldan,
F. Khabanov,
T. Cote,
A. G. McLean,
F. Scotti,
K. E. Thome
Abstract:
The first achievement of highly radiating plasmas in negative triangularity is shown with an operational space featuring high core radiation at high Greenwald fraction obtained with the injection of reactor-relevant seeded gases. These negative triangularity (NT) shape diverted discharges reach high values of normalized plasma pressure (BetaN > 2) at high radiation fraction with no ELMs. We demons…
▽ More
The first achievement of highly radiating plasmas in negative triangularity is shown with an operational space featuring high core radiation at high Greenwald fraction obtained with the injection of reactor-relevant seeded gases. These negative triangularity (NT) shape diverted discharges reach high values of normalized plasma pressure (BetaN > 2) at high radiation fraction with no ELMs. We demonstrate that as long as the impurity level in the core is kept low to avoid excessive fuel dilution and impurity accumulation, integration of NT configuration with high radiation fraction not only is achievable but it can lead to confinement improvement with stabilization effects originating from collisionality, ExB shear and profiles changes due to impurity radiation cooling. The underlying physics mechanism is robust and holds for a variety of impurity species. The absence of the requirement to stay in H-mode translates in a higher core radiation fraction potentially allowed in NT shape effectively mitigating the power exhaust issue. The results presented here demonstrate a path to high performance, ELM free and highly radiative regime with rector-relevant seeding gases making this regime a potential new scenario for reactor operation.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
Characterization of the ELM-free Negative Triangularity Edge on DIII-D
Authors:
A. O. Nelson,
L. Schmitz,
T. Cote,
J. F. Parisi,
S. Stewart,
C. Paz-Soldan,
K. E. Thome,
M. E. Austin,
F. Scotti,
J. L. Barr,
A. Hyatt,
N. Leuthold,
A. Marinoni,
T. Neiser,
T. Osborne,
N. Richner,
A. S. Welander,
W. P. Wehner,
R. Wilcox,
T. M. Wilks,
J. Yang
Abstract:
Tokamak plasmas with strong negative triangularity (NT) shaping typically exhibit fundamentally different edge behavior than conventional L-mode or H-mode plasmas. Over the entire DIII-D database, plasmas with sufficiently negative triangularity are found to be inherently free of edge localized modes (ELMs), even at injected powers well above the predicted L-H power threshold. A critical triangula…
▽ More
Tokamak plasmas with strong negative triangularity (NT) shaping typically exhibit fundamentally different edge behavior than conventional L-mode or H-mode plasmas. Over the entire DIII-D database, plasmas with sufficiently negative triangularity are found to be inherently free of edge localized modes (ELMs), even at injected powers well above the predicted L-H power threshold. A critical triangularly ($δ_\mathrm{crit}\simeq-0.15$), consistent with inherently ELM-free operation is identified, beyond which access to the second stability region for infinite-$n$ ballooning modes closes on DIII-D. It is also possible to close access to this region, and thereby prevent an H-mode transition, at weaker average triangularities ($δ\lesssimδ_\mathrm{crit}$) provided that at least one of the two x-points is still sufficiently negative. Enhanced low field side magnetic fluctuations during ELM-free operation are consistent with additional turbulence limiting the NT edge gradient. Despite the reduced upper limit on the pressure gradient imposed by ballooning stability, NT plasmas are able to support small pedestals and are typically characterized by an enhancement of edge pressure gradients beyond those found in traditional L-mode plasmas. Further, the pressure gradient inside of this small pedestal is unusually steep, allowing access to high core performance that is competitive with other ELM-free regimes previously achieved on DIII-D. Since ELM-free operation in NT is linked directly to the magnetic geometry, NT fusion pilot plants are predicted to maintain advantageous edge conditions even in burning plasma regimes, potentially eliminating reactor core-integration issues caused by ELMs.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D
Authors:
D. R. Ernst,
A. Bortolon,
C. S. Chang,
S. Ku,
F. Scotti,
H. Q. Wang,
Z. Yan,
Jie Chen,
C. Chrystal,
F. Glass,
S. Haskey,
R. Hood,
F. Khabanov,
F. Laggner,
C. Lasnier,
G. R. McKee,
T. L. Rhodes,
D. Truong,
J. Watkins
Abstract:
Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with…
▽ More
Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements.
△ Less
Submitted 5 August, 2024; v1 submitted 29 February, 2024;
originally announced March 2024.
-
Simultaneous access to high normalized current, pressure, density, and confinement in strongly-shaped diverted negative triangularity plasmas
Authors:
C. Paz-Soldan,
C. Chrystal,
P. Lunia,
A. O. Nelson,
K. E. Thome,
M. E. Austin,
T. B. Cote,
A. W. Hyatt,
A. Marinoni,
T. H. Osborne,
M. Pharr,
O. Sauter,
F. Scotti,
T. M. Wilks,
H. S. Wilson
Abstract:
Strongly-shaped diverted negative triangularity (NT) plasmas in the DIII-D tokamak demonstrate simultaneous access to high normalized current, pressure, density, and confinement. NT plasmas are shown to exist across an expansive parameter space compatible with high fusion power production, revealing surprisingly good core stability properties that compare favorably to conventional positive triangu…
▽ More
Strongly-shaped diverted negative triangularity (NT) plasmas in the DIII-D tokamak demonstrate simultaneous access to high normalized current, pressure, density, and confinement. NT plasmas are shown to exist across an expansive parameter space compatible with high fusion power production, revealing surprisingly good core stability properties that compare favorably to conventional positive triangularity plasmas in DIII-D. Non-dimensionalizing the operating space, edge safety factors below 3, normalized betas above 3, Greenwald density fractions above 1, and high-confinement mode (H-mode) confinement qualities above 1 are simultaneously observed, all with a robustly stable edge free from deleterious edge-localized mode instabilities. Scaling of the confinement time with engineering parameters reveals at least a linear dependence on plasma current although with significant power degradation, both in excess of expected H-mode scalings. These results increase confidence that NT plasmas are a viable approach to realize fusion power and open directions for future detailed study.
△ Less
Submitted 7 September, 2023;
originally announced September 2023.
-
Robust avoidance of edge-localized modes alongside gradient formation in the negative triangularity tokamak edge
Authors:
A. O. Nelson,
L. Schmitz,
C. Paz-Soldan,
K. E. Thome,
T. B. Cote,
N. Leuthold,
F. Scotti,
M. E. Austin,
A. Hyatt,
T. Osborne
Abstract:
In a series of high performance diverted discharges on DIII-D, we demonstrate that strong negative triangularity (NT) shaping robustly suppresses all edge-localized mode (ELM) activity over a wide range of plasma conditions: $\langle n\rangle=0.1-1.5\times10^{20}$m$^{-3}$, $P_\mathrm{aux}=0-15$MW and $|B_\mathrm{t}|=1-2.2$T, corresponding to $P_\mathrm{loss}/P_\mathrm{LH08}\sim8$. The full dataset…
▽ More
In a series of high performance diverted discharges on DIII-D, we demonstrate that strong negative triangularity (NT) shaping robustly suppresses all edge-localized mode (ELM) activity over a wide range of plasma conditions: $\langle n\rangle=0.1-1.5\times10^{20}$m$^{-3}$, $P_\mathrm{aux}=0-15$MW and $|B_\mathrm{t}|=1-2.2$T, corresponding to $P_\mathrm{loss}/P_\mathrm{LH08}\sim8$. The full dataset is consistent with the theoretical prediction that magnetic shear in the NT edge inhibits access to ELMing H-mode regimes; all experimental pressure profiles are found to be at or below the infinite-$n$ ballooning stability limit. Importantly, we also report enhanced edge pressure gradients at strong NT that are significantly steeper than in traditional ELM-free L-mode plasmas and provide significant promise for NT reactor integration.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
In-situ coating of silicon-rich films on tokamak plasma-facing components with real-time Si material injection
Authors:
Florian Effenberg,
Shota Abe,
Gregory Sinclair,
Tyler Abrams,
Alessandro Bortolon,
William R. Wampler,
Florian M. Laggner,
Dmitry L. Rudakov,
Igor Bykov,
Charles J. Lasnier,
David Mauzey,
Alexander Nagy,
Raffi Nazikian,
Filippo Scotti,
Huiqian Wang,
Robert S. Wilcox,
the DIII-D Team
Abstract:
Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities…
▽ More
Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities ranging from $3.9-7.5\times10^{19}$ m$^{-3}$ and input powers ranging from $5.5-9$ MW. The small Si pellets were delivered with the impurity granule injector (IGI) at frequencies ranging from 4-16 Hz corresponding to mass flow rates of $5-19$ mg/s ($1-4.2\times10^{20}$ Si/s) at cumulative amounts of up to 34 mg of Si per five-second discharge. Graphite samples were exposed to the scrape-off layer and private flux region plasmas through the divertor material evaluation system (DiMES) to evaluate the Si deposition on the divertor targets. The Si II emission at the sample correlates with silicon injection and suggests net surface Si-deposition in measurable amounts. Post-mortem analysis showed Si-rich coatings containing silicon oxides, of which SiO$_2$ is the dominant component. No evidence of SiC was found, which is attributed to low divertor surface temperatures. The in-situ and ex-situ analysis found that Si-rich coatings of at least $0.4-1.2$ nm thickness have been deposited at $0.4-0.7$ nm/s. The technique is estimated to coat a surface area of at least 0.94 m$^2$ on the outer divertor. These results demonstrate the potential of using real-time material injection to form Si-enriched layers on divertor PFCs during reactor operation.
△ Less
Submitted 9 August, 2023; v1 submitted 8 April, 2023;
originally announced April 2023.
-
Mitigation of plasma-wall interactions with low-Z powders in DIII-D high confinement plasmas
Authors:
Florian Effenberg,
Alessandro Bortolon,
Livia Casali,
Raffi Nazikian,
Igor Bykov,
Filippo Scotti,
Huiqian Q. Wang,
Max E. Fenstermacher,
Robert Lunsford,
Alexander Nagy,
Brian A. Grierson,
Florian M. Laggner,
Rajesh Maingi,
the DIII-D Team
Abstract:
Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-a…
▽ More
Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-angle slot (SAS) divertor for 2-s intervals at constant rates of 3-204 mg/s. The multi-species BN powders at a rate of 54 mg/s showed the most substantial increase in divertor neutral compression by more than an order of magnitude and lasting detachment with minor degradation of the stored magnetic energy $W_{mhd}$ by 5%. Rates of 204 mg/s of boron nitride powder further reduce ELM-fluxes on the divertor but also cause a drop in confinement performance by 24% due to the onset of an $n=2$ tearing mode. The application of powders also showed a substantial improvement of wall conditions manifesting in reduced wall fueling source and intrinsic carbon and oxygen content in response to the cumulative injection of non-recycling materials. The results suggest that low-Z powder injection, including mixed element compounds, is a promising new core-edge compatible technique that simultaneously enables divertor detachment and improves wall conditions during high confinement operation.
△ Less
Submitted 16 August, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Evaluation of silicon carbide as a divertor armor material in DIII-D H-mode discharges
Authors:
T. Abrams,
S. Bringuier,
D. M. Thomas,
G. Sinclair,
S. Gonderman,
L. Holland,
D. L. Rudakov,
R. S. Wilcox,
E. A. Unterberg,
F. Scotti
Abstract:
Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bo…
▽ More
Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bombardment due to more efficient physical and chemical sputtering of C relative to Si. Silicon erosion from SiC thereby occurs primarily from sputtering of the enriched Si layer, rather than directly from the SiC itself. SiC coatings on ATJ graphite, manufactured via chemical vapor deposition, were exposed to repeated H-mode plasma discharges in the DIII-D tokamak to test this model. The qualitative trends from analytic modeling are reproduced by the experimental measurements, obtained via spectroscopic inference using the S/XB method. Quantitatively the model slightly under-predicts measured erosion rates, which is attributed to uncertainties in the ion impact angle distribution, as well as the effect of edge-localized modes. After exposure, minimal changes to the macroscopic or microscopic surface morphology of the SiC coatings were observed. Compositional analysis reveals Si enrichment of about 10%, in line with expectations from the erosion model. Extrapolating to a DEMO-type device, an order-of-magnitude decrease in impurity sourcing, and up to a factor of 2 decrease in impurity radiation, is expected with SiC walls, relative to graphite, if low C plasma impurity content can be achieved. These favorable erosion properties motivate further investigations of SiC as a low-Z, non-metallic PFM.
△ Less
Submitted 8 April, 2021;
originally announced April 2021.
