-
Effects of alloying elements on carbon diffusion in the austenite (f.c.c.) and ferrite (b.c.c.) phases
Authors:
Zugang Mao,
Amir R. Farkoosh,
David N. Seidman
Abstract:
TThe effects of alloying elements on diffusion pathways and migration energies of interstitial carbon in austenite (f.c.c.) and ferrite (b.c.c.) are studied using density functional theory first-principles calculations. The binding energies between carbon and alloying elements are determined through 6th nearest-neighbor (NN) distances. The elements studied are Ni, Mo, V, Cr, Mn, Cu, Al, Ti, and Si…
▽ More
TThe effects of alloying elements on diffusion pathways and migration energies of interstitial carbon in austenite (f.c.c.) and ferrite (b.c.c.) are studied using density functional theory first-principles calculations. The binding energies between carbon and alloying elements are determined through 6th nearest-neighbor (NN) distances. The elements studied are Ni, Mo, V, Cr, Mn, Cu, Al, Ti, and Si, relevant to most high-strength steels. Nickel, Mn, Al, and Si have repulsive binding energies; Mo, V, Cr, Cu, and Ti have attractive binding energies in austenite and ferrite. Alloying elements at 1st NN sites of a C atom in an octahedral site introduce asymmetry into the minimum energy diffusion pathway, causing up to about 1 eV changes in saddle-point energies. This pathway goes from one octahedral site to another via intermediate energy states, differing for austenite and ferrite. We find that the elements with attractive binding energies increase the energy barrier for C migration resulting in decelerated carbon diffusion, while the elements with repulsive binding energies decrease the energy barrier for C migration leading to accelerated C diffusion. The magnitude of changes in C migration energies is proportional to the binding energies between C and alloying elements. Among the three austenite stabilizers, Ni and Mn are C diffusion accelerators, while Cu decelerates C diffusion in austenite. Among the four ferrite stabilizers, Si is a C diffusion accelerator, while V and Ti serve as C diffusion decelerators in ferrite. Aluminum has no significant effect on C's diffusivity, while Mo and Cr decelerate C diffusion.
△ Less
Submitted 30 May, 2024; v1 submitted 28 May, 2024;
originally announced May 2024.
-
Healing Gradient Degradation in Nb3Sn SRF Cavities Using a Recoating Method
Authors:
Eric Viklund,
David N. Seidman,
Brad M. Tennis,
Grigory Eremeev,
Sam Posen
Abstract:
Despite having advantageous superconducting properties, Nb3Sn superconducting radiofrequency (SRF) cavities still have practical challenges compared to Nb SRF cavities due to the brittle nature of Nb3Sn. Performance degradation can occur when a Nb3Sn SRF cavity experiences mechanical stresses such as during handling and tuning of the cavity. In this study, we present a potential treatment for SRF…
▽ More
Despite having advantageous superconducting properties, Nb3Sn superconducting radiofrequency (SRF) cavities still have practical challenges compared to Nb SRF cavities due to the brittle nature of Nb3Sn. Performance degradation can occur when a Nb3Sn SRF cavity experiences mechanical stresses such as during handling and tuning of the cavity. In this study, we present a potential treatment for SRF cavities that have experienced stress induced performance degradation that involves a recoating procedure. The degraded cavity is coated with a small amount of Sn using a single step vapor-diffusion methodology. Using this approach we can recover a significant portion of the lost performance of a Nb3Sn SRF cavity.
△ Less
Submitted 30 April, 2024;
originally announced May 2024.
-
Improving Nb3Sn Cavity Performance Using Centrifugal Barrel Polishing
Authors:
Eric Viklund,
David N. Seidman,
David Burk,
Sam Posen
Abstract:
In this study we will show a new method of polishing for Nb3Sn cavities known as centrifugal barrel polishing (CBP). Using this method, Nb3Sn coated samples are polished to a surface roughness comparable to a traditional Nb cavity after electropolishing (EP). We also investigate different methods of cleaning the Nb3Sn surface after CBP to remove residual abrasive particles. The polished Nb3Sn surf…
▽ More
In this study we will show a new method of polishing for Nb3Sn cavities known as centrifugal barrel polishing (CBP). Using this method, Nb3Sn coated samples are polished to a surface roughness comparable to a traditional Nb cavity after electropolishing (EP). We also investigate different methods of cleaning the Nb3Sn surface after CBP to remove residual abrasive particles. The polished Nb3Sn surface is analyzed using confocal laser microscopy, and scanning electron microscopy (SEM) is used to image the surface and measure the surface roughness after polishing. Transmission electron microscopy (TEM) is also used for high resolution analysis of the surface after polishing. Finally, we show that centrifugal barrel polishing can improve the performance of a Nb3Sn SRF cavity.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Key directions for research and development of superconducting radio frequency cavities
Authors:
S. Belomestnykh,
S. Posen,
D. Bafia,
S. Balachandran,
M. Bertucci,
A. Burrill,
A. Cano,
M. Checchin,
G. Ciovati,
L. D. Cooley,
G. Dalla Lana Semione,
J. Delayen,
G. Eremeev,
F. Furuta,
F. Gerigk,
B. Giaccone,
D. Gonnella,
A. Grassellino,
A. Gurevich,
W. Hillert,
M. Iavarone,
J. Knobloch,
T. Kubo,
W. K. Kwok,
R. Laxdal
, et al. (31 additional authors not shown)
Abstract:
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and…
▽ More
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.
△ Less
Submitted 21 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
Advances in Nb3Sn superconducting radiofrequency cavities towards first practical accelerator applications
Authors:
S. Posen,
J. Lee,
D. N. Seidman,
A. Romanenko,
B. Tennis,
O. S. Melnychuk,
D. A. Sergatskov
Abstract:
Nb3Sn is a promising next-generation material for superconducting radiofrequency cavities, with significant potential for both large scale and compact accelerator applications. However, so far, Nb3Sn cavities have been limited to cw accelerating fields <18 MV/m. In this paper, new results are presented with significantly higher fields, as high as 24 MV/m in single cell cavities. Results are also p…
▽ More
Nb3Sn is a promising next-generation material for superconducting radiofrequency cavities, with significant potential for both large scale and compact accelerator applications. However, so far, Nb3Sn cavities have been limited to cw accelerating fields <18 MV/m. In this paper, new results are presented with significantly higher fields, as high as 24 MV/m in single cell cavities. Results are also presented from the first ever Nb3Sn-coated 1.3 GHz 9-cell cavity, a full-scale demonstration on the cavity type used in production for the European XFEL and LCLS-II. Results are presented together with heat dissipation curves to emphasize the potential for industrial accelerator applications using cryocooler-based cooling systems. The cavities studied have an atypical shiny visual appearance, and microscopy studies of witness samples reveal significantly reduced surface roughness and smaller film thickness compared to typical Nb3Sn films for superconducting cavities. Possible mechanisms for increased maximum field are discussed as well as implications for physics of RF superconductivity in the low coherence length regime. Outlook for continued development is presented.
△ Less
Submitted 11 August, 2020; v1 submitted 2 August, 2020;
originally announced August 2020.
-
Development and Understanding of Nb$_3$Sn films for radiofrequency applications through a sample-host 9-cell cavity
Authors:
T. Spina,
B. M. Tennis,
J. Lee,
D. N. Seidman,
S. Posen
Abstract:
Nb$_3$Sn is a promising advanced material under development for superconducting radiofrequency (SRF) cavities. Past efforts have been focused primarily on small development-scale cavities, but large, often multi-celled cavities, are needed for particle accelerator applications. In this work, we report on successful Nb$_3$Sn coatings on Nb in a 1 m-long 9-cell Nb sample-host cavity at Fermilab. The…
▽ More
Nb$_3$Sn is a promising advanced material under development for superconducting radiofrequency (SRF) cavities. Past efforts have been focused primarily on small development-scale cavities, but large, often multi-celled cavities, are needed for particle accelerator applications. In this work, we report on successful Nb$_3$Sn coatings on Nb in a 1 m-long 9-cell Nb sample-host cavity at Fermilab. The geometry of the first coating with only one Sn source made it possible to study the influence of Sn flux on the microstructure. Based on these results, we postulate a connection between recently observed anomalously large thin grains and uncovered niobium spots observed in the past by other authors [Trenikhina 2018]. A phenomenological model to explain how these anomalously large grains could form is proposed. This model is invoked to provide possible explanations for literature results from several groups and to guide key process parameters to achieve uniform vapor-diffusion coatings, when applied to complex structures as the multi-cell cavity under study.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
Analysis of Magnetic Vortex Dissipation in Sn-Segregated Boundaries in Nb$_3$Sn Superconducting RF Cavities
Authors:
Jared Carlson,
Alden Pack,
Mark K. Transtrum,
Jaeyel Lee,
David N. Seidman,
Danilo B. Liarte,
Nathan Sitaraman,
Alen Senanian,
Michelle Kelley,
James P. Sethna,
Tomas Arias,
Sam Posen
Abstract:
We study mechanisms of vortex nucleation in Nb$_3$Sn Superconducting RF (SRF) cavities using a combination of experimental, theoretical, and computational methods. Scanning transmission electron microscopy (STEM) image and energy dispersive spectroscopy (EDS) of some Nb$_3$Sn cavities show Sn segregation at grain boundaries in Nb$_3$Sn with Sn concentration as high as $\sim$35 at.\% and widths…
▽ More
We study mechanisms of vortex nucleation in Nb$_3$Sn Superconducting RF (SRF) cavities using a combination of experimental, theoretical, and computational methods. Scanning transmission electron microscopy (STEM) image and energy dispersive spectroscopy (EDS) of some Nb$_3$Sn cavities show Sn segregation at grain boundaries in Nb$_3$Sn with Sn concentration as high as $\sim$35 at.\% and widths $\sim$3 nm in chemical composition. Using ab initio calculations, we estimate the effect excess tin has on the local superconducting properties of the material. We model Sn segregation as a lowering of the local critical temperature. We then use time-dependent Ginzburg-Landau theory to understand the role of segregation on magnetic vortex nucleation. Our simulations indicate that the grain boundaries act as both nucleation sites for vortex penetration and pinning sites for vortices after nucleation. Depending on the magnitude of the applied field, vortices may remain pinned in the grain boundary or penetrate the grain itself. We estimate the superconducting losses due to vortices filling grain boundaries and compare with observed performance degradation with higher magnetic fields. We estimate that the quality factor may decrease by an order of magnitude ($10^{10}$ to $10^9$) at typical operating fields if 0.03\% of the grain boundaries actively nucleate vortices. We additionally estimate the volume that would need to be filled with vortices to match experimental observations of cavity heating.
△ Less
Submitted 20 December, 2020; v1 submitted 6 March, 2020;
originally announced March 2020.
-
Phase Segmentation in Atom-Probe Tomography Using Deep Learning-Based Edge Detection
Authors:
Sandeep Madireddy,
Ding-Wen Chung,
Troy Loeffler,
Subramanian K. R. S. Sankaranarayanan,
David N. Seidman,
Prasanna Balaprakash,
Olle Heinonen
Abstract:
Atom-probe tomography (APT) facilitates nano- and atomic-scale characterization and analysis of microstructural features. Specifically, APT is well suited to study the interfacial properties of granular or heterophase systems. Traditionally, the identification of the interface between, for precipitate and matrix phases, in APT data has been obtained either by extracting iso-concentration surfaces…
▽ More
Atom-probe tomography (APT) facilitates nano- and atomic-scale characterization and analysis of microstructural features. Specifically, APT is well suited to study the interfacial properties of granular or heterophase systems. Traditionally, the identification of the interface between, for precipitate and matrix phases, in APT data has been obtained either by extracting iso-concentration surfaces based on a user-supplied concentration value or by manually perturbing the concentration value until the iso-concentration surface qualitatively matches the interface. These approaches are subjective, not scalable, and may lead to inconsistencies due to local composition inhomogeneities.
We propose a digital image segmentation approach based on deep neural networks that transfer learned knowledge from natural images to automatically segment the data obtained from APT into different phases. This approach not only provides an efficient way to segment the data and extract interfacial properties but does so without the need for expensive interface labeling for training the segmentation model.
We consider here a system with a precipitate phase in a matrix and with three different interface modalities---layered, isolated, and interconnected---that are obtained for different relative geometries of the precipitate phase. We demonstrate the accuracy of our segmentation approach through qualitative visualization of the interfaces, as well as through quantitative comparisons with proximity histograms obtained by using more traditional approaches.
△ Less
Submitted 10 April, 2019;
originally announced April 2019.
-
Atomic scale analysis of Nb3Sn on Nb prepared by a vapor-diffusion process for superconducting radiofrequency cavity applications
Authors:
Jaeyel Lee,
Sam Posen,
Zugang Mao,
Yulia Trenikhina,
Kai He,
Daniel L Hall,
Matthias Liepe,
David N Seidman
Abstract:
We report an atomic-scale analysis of the microstructure of Nb3Sn coating on Nb prepared by vapor diffusion process for superconducting radiofrequency (SRF) cavity application using transmission electron microscopy (TEM). Epitaxial growth of Nb3Sn on the Nb substrate is found and four types of orientation relationships at the Nb3Sn/Nb interface are identified by electron diffraction or high-resolu…
▽ More
We report an atomic-scale analysis of the microstructure of Nb3Sn coating on Nb prepared by vapor diffusion process for superconducting radiofrequency (SRF) cavity application using transmission electron microscopy (TEM). Epitaxial growth of Nb3Sn on the Nb substrate is found and four types of orientation relationships at the Nb3Sn/Nb interface are identified by electron diffraction or high-resolution scanning transmission electron microscopy (STEM) analysis. Thin Nb3Sn grains are observed in regions with low Sn flux and they have the specific orientation relationship, Nb3Sn (1-20)//Nb (-111) and Nb3Sn (002)//Nb (0-11). The Nb3Sn/Nb interface of thin grains had a large lattice mismatch, 12.3 at.%, and a high density of misfit dislocations was observed by HR-STEM. Based on our microstructural analysis of the thin grains, we conclude that the thin regions are probably a result of a slow interfacial reaction with this particular orientation relationship at the interface. The Sn-deficient regions are seen to form initially at the Nb3Sn/Nb interface and remain in the grains due to the slow diffusion of Sn in bulk Nb3Sn. The formation of Sn-deficient regions and the effects of strain and interfacial energies on the formation of Sn-deficient regions at various interfaces were also estimated by first-principle calculation. The finding of orientation relationships at the Nb3Sn/Nb interface provides important information about the formation of defects in Nb3Sn coatings such as large thin regions, Sn-deficient regions, which are critical to the performance of Nb3Sn superconducting radiofrequency cavities for accelerators.
△ Less
Submitted 30 June, 2019; v1 submitted 10 July, 2018;
originally announced July 2018.