Showing 1–50 of 75 results for author: Shao, Y

Efficient algorithms for surface density of states in topological photonic and acoustic systems

Authors: Yi-Xin Sha, Ming-Yao Xia, Ling Lu, Yi Yang

Abstract: Robust surface states are a defining feature of topological photonic and acoustic systems. Although the supercell technique is commonly used for studying their surface effects, it falls short in sorting the states at two boundaries, differentiating surface states from bulk states, and demanding large computational resources. To overcome the limitations, we employ surface Green's functions combined… ▽ More Robust surface states are a defining feature of topological photonic and acoustic systems. Although the supercell technique is commonly used for studying their surface effects, it falls short in sorting the states at two boundaries, differentiating surface states from bulk states, and demanding large computational resources. To overcome the limitations, we employ surface Green's functions combined with two efficient algorithms to obtain the ideal surface states for a semi-infinite system. They are further extended to more complex scenarios, such as coated structures, heterostructures, and sandwiched structures. Photonic Chern insulators, valley photonic crystals, and acoustic topological insulators are taken as examples for demonstration and verification. The surface spectra obtained from our approach can be directly used for comparison with experimental observables. Our approach enriches the efficient computational tools for topological photonics and acoustics. △ Less

Submitted 15 August, 2024; originally announced August 2024.

Comments: 11 pages, 7 figures

Can The Mystery of The Born-Oppenheimer Electronic Current Density Be Explained With A Simple Phase Space Electronic Hamiltonian? Yes (And A Lot More Too)

Authors: Zhen Tao, Titouan Duston, Zheng Pei, Yihan Shao, Jonathan Rawlinson, Robert Littlejohn, Joseph E. Subotnik

Abstract: We show that a phase space electronic Hamiltonian $\hat{H}_{PS}(\mathbf{X},\mathbf{P})$, parameterized by both nuclear position $\mathbf{X}$ and momentum $\mathbf{P}$, can recover not just experimental vibrational circular dichroism (VCD) signals, but also a meaningful electronic current density that explains the features of the VCD rotatory strengths. Combined with earlier demonstrations that suc… ▽ More We show that a phase space electronic Hamiltonian $\hat{H}_{PS}(\mathbf{X},\mathbf{P})$, parameterized by both nuclear position $\mathbf{X}$ and momentum $\mathbf{P}$, can recover not just experimental vibrational circular dichroism (VCD) signals, but also a meaningful electronic current density that explains the features of the VCD rotatory strengths. Combined with earlier demonstrations that such Hamiltonians can also recover qualitatively correct electronic momenta with electronic densities that approximately satisfy a continuity equation, the data would suggest that we have isolated a meaningful alternative approach to electronic structure theory, one that entirely avoids Born-Oppenheimer theory and frozen nuclei. While the dynamical implications of such a phase space electronic Hamiltonian are not yet known, we hypothesize that, by offering classical trajectories the conserve the total angular momentum (unlike Born-Oppenheimer theory), this new phase space electronic structure Hamiltonian may well explain some fraction of the chiral-induced spin selectivity effect. △ Less

Submitted 27 July, 2024; originally announced July 2024.

Pixelated Bayer Spectral Router Based on Sparse Meta-atom Array

Authors: Yifan Shao, Rui Chen, Yubo Wang, Shuhan Guo, Junjie Zhan, Pankaj K. Choudhury, Yungui Ma

Abstract: It has long been a challenging task to improve the light collection efficiency of conventional image sensors built with color filters that inevitably cause the energy loss of out-of-band photons. Although various schemes have been proposed to address the issue, it is still very hard to make a reasonable tradeoff between device performance and practicability. In this work, we demonstrate a pixelate… ▽ More It has long been a challenging task to improve the light collection efficiency of conventional image sensors built with color filters that inevitably cause the energy loss of out-of-band photons. Although various schemes have been proposed to address the issue, it is still very hard to make a reasonable tradeoff between device performance and practicability. In this work, we demonstrate a pixelated spectral router based on sparse meta-atom array, which can efficiently separate the incident R (600-700 nm), G (500-600 nm), and B (400-500 nm) band light to the corresponding pixels of a Bayer image sensor, providing over 56% signal enhancement above the traditional color filter scheme. The CMOS-compatible spectral router has superior characteristics of polarization insensitivity and high incident angle tolerance (over 30°), enabled by simple compound Si3N4 nanostructures which are very suitable for massive production. Imaging experiments are conducted to verify its potential for real applications. Our pixelated spectral router scheme is also found to be robust and could be freely adapted to image sensors of various pixel sizes, having great potential in building the new generation of high-performance image sensing components. △ Less

Submitted 19 July, 2024; originally announced July 2024.

Comments: 39 pages and 5 figures for the main text

Kinetic control of ferroelectricity in ultrathin epitaxial Barium Titanate capacitors

Authors: Harish Kumarasubramanian, Prasanna Venkat Ravindran, Ting-Ran Liu, Taeyoung Song, Mythili Surendran, Huandong Chen, Pratyush Buragohain, I-Cheng Tung, Arnab Sen Gupta, Rachel Steinhardt, Ian A. Young, Yu-Tsun Shao, Asif Islam Khan, Jayakanth Ravichandran

Abstract: Ferroelectricity is characterized by the presence of spontaneous and switchable macroscopic polarization. Scaling limits of ferroelectricity have been of both fundamental and technological importance, but the probes of ferroelectricity have often been indirect due to confounding factors such as leakage in the direct electrical measurements. Recent interest in low-voltage switching electronic devic… ▽ More Ferroelectricity is characterized by the presence of spontaneous and switchable macroscopic polarization. Scaling limits of ferroelectricity have been of both fundamental and technological importance, but the probes of ferroelectricity have often been indirect due to confounding factors such as leakage in the direct electrical measurements. Recent interest in low-voltage switching electronic devices squarely puts the focus on ultrathin limits of ferroelectricity in an electronic device form, specifically on the robustness of ferroelectric characteristics such as retention and endurance for practical applications. Here, we illustrate how manipulating the kinetic energy of the plasma plume during pulsed laser deposition can yield ultrathin ferroelectric capacitor heterostructures with high bulk and interface quality, significantly low leakage currents and a broad "growth window". These heterostructures venture into previously unexplored aspects of ferroelectric properties, showcasing ultralow switching voltages ($<$0.3 V), long retention times ($>$10$^{4}$s), and high endurance ($>$10$^{11}$cycles) in 20 nm films of the prototypical perovskite ferroelectric, BaTiO$_{3}$. Our work demonstrates that materials engineering can push the envelope of performance for ferroelectric materials and devices at the ultrathin limit and opens a direct, reliable and scalable pathway to practical applications of ferroelectrics in ultralow voltage switches for logic and memory technologies. △ Less

Submitted 18 July, 2024; originally announced July 2024.

Uniaxial plasmon polaritons $\textit{via}$ charge transfer at the graphene/CrSBr interface

Authors: Daniel J. Rizzo, Eric Seewald, Fangzhou Zhao, Jordan Cox, Kaichen Xie, Rocco A. Vitalone, Francesco L. Ruta, Daniel G. Chica, Yinming Shao, Sara Shabani, Evan J. Telford, Matthew C. Strasbourg, Thomas P. Darlington, Suheng Xu, Siyuan Qiu, Aravind Devarakonda, Takashi Taniguchi, Kenji Watanabe, Xiaoyang Zhu, P. James Schuck, Cory R. Dean, Xavier Roy, Andrew J. Millis, Ting Cao, Angel Rubio , et al. (2 additional authors not shown)

Abstract: Graphene is a privileged 2D platform for hosting confined light-matter excitations known as surface plasmon-polaritons (SPPs), as it possesses low intrinsic losses with a high degree of optical confinement. However, the inherently isotropic optical properties of graphene limit its ability to guide and focus SPPs, making it less suitable than anisotropic elliptical and hyperbolic materials as a pla… ▽ More Graphene is a privileged 2D platform for hosting confined light-matter excitations known as surface plasmon-polaritons (SPPs), as it possesses low intrinsic losses with a high degree of optical confinement. However, the inherently isotropic optical properties of graphene limit its ability to guide and focus SPPs, making it less suitable than anisotropic elliptical and hyperbolic materials as a platform for polaritonic lensing and canalization. Here, we present the graphene/CrSBr heterostructure as an engineered 2D interface that hosts highly anisotropic SPP propagation over a wide range of frequencies in the mid-infrared and terahertz. Using a combination of scanning tunneling microscopy (STM), scattering-type scanning near-field optical microscopy (s-SNOM), and first-principles calculations, we demonstrate mutual doping in excess of 10$^{13}$ cm$^{-2}$ holes/electrons between the interfacial layers of graphene/CrSBr heterostructures. SPPs in graphene activated by charge transfer interact with charge-induced anisotropic intra- and interband transitions in the interfacial doped CrSBr, leading to preferential SPP propagation along the quasi-1D chains that compose each CrSBr layer. This multifaceted proximity effect both creates SPPs and endows them with anisotropic transport and propagation lengths that differ by an order-of-magnitude between the two in-plane crystallographic axes of CrSBr. △ Less

Submitted 9 July, 2024; originally announced July 2024.

Improving ensemble extreme precipitation forecasts using generative artificial intelligence

Authors: Yingkai Sha, Ryan A. Sobash, David John Gagne II

Abstract: An ensemble post-processing method is developed to improve the probabilistic forecasts of extreme precipitation events across the conterminous United States (CONUS). The method combines a 3-D Vision Transformer (ViT) for bias correction with a Latent Diffusion Model (LDM), a generative Artificial Intelligence (AI) method, to post-process 6-hourly precipitation ensemble forecasts and produce an enl… ▽ More An ensemble post-processing method is developed to improve the probabilistic forecasts of extreme precipitation events across the conterminous United States (CONUS). The method combines a 3-D Vision Transformer (ViT) for bias correction with a Latent Diffusion Model (LDM), a generative Artificial Intelligence (AI) method, to post-process 6-hourly precipitation ensemble forecasts and produce an enlarged generative ensemble that contains spatiotemporally consistent precipitation trajectories. These trajectories are expected to improve the characterization of extreme precipitation events and offer skillful multi-day accumulated and 6-hourly precipitation guidance. The method is tested using the Global Ensemble Forecast System (GEFS) precipitation forecasts out to day 6 and is verified against the Climate-Calibrated Precipitation Analysis (CCPA) data. Verification results indicate that the method generated skillful ensemble members with improved Continuous Ranked Probabilistic Skill Scores (CRPSSs) and Brier Skill Scores (BSSs) over the raw operational GEFS and a multivariate statistical post-processing baseline. It showed skillful and reliable probabilities for events at extreme precipitation thresholds. Explainability studies were further conducted, which revealed the decision-making process of the method and confirmed its effectiveness on ensemble member generation. This work introduces a novel, generative-AI-based approach to address the limitation of small numerical ensembles and the need for larger ensembles to identify extreme precipitation events. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Visible, Near-, and Mid-infrared Computational Spectrometer Enabled by Single-Spinning Film Encoder

Authors: Junren Wen, Weiming Shi, Cheng Gao, Yujie Liu, Shuaibo Feng, Yu Shao, Haiqi Gao, Yuchuan Shao, Yueguang Zhang, Weidong Shen, Chenying Yang

Abstract: Computational spectrometers are pivotal in enabling low-cost, in-situ and rapid spectral analysis, with potential applications in chemistry, biology, and environmental science. However, filter-based spectral encoding approaches typically use filter arrays, complicating the manufacturing process and hindering device consistency. By capitalizing on the polarization separation effect under oblique in… ▽ More Computational spectrometers are pivotal in enabling low-cost, in-situ and rapid spectral analysis, with potential applications in chemistry, biology, and environmental science. However, filter-based spectral encoding approaches typically use filter arrays, complicating the manufacturing process and hindering device consistency. By capitalizing on the polarization separation effect under oblique incidence (PSEOI), we pioneer the use of a single filter for highly efficient spectral encoding, and propose a novel computational spectrometer spanning visible to mid-infrared wavelengths by combining the Single-Spinning Film Encoder (SSFE) with deep learning-based reconstruction algorithm. The particle swarm optimization (PSO) method is employed to optimize the film configuration of SSFE, achieving low-correlation and high-complexity spectral responses under different polarizations and spinning angles, thereby enhancing both spectral resolution and accuracy of reconstruction across diverse spectral ranges. Spectral resolutions up to 0.5 nm, 2 nm, 10 nm can be realized for single-peak narrowband spectra, and 3 nm, 6 nm, 20 nm for dual-peak narrowband spectra, over the visible, near-, and mid-infrared wavelength ranges, respectively. Moreover, the proposed spectrometer demonstrates an overall 81.38% precision for the classification of 220 chemical compounds, confirming its robustness and precision in practical scenarios, along with the capability for compact, cost-effective spectroscopic solutions. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Pixel-scale NIR-VIS Spectral Routers Based on 2D Mie-type Metagratings

Authors: Yifan Shao, Shuhan Guo, Rui Chen, Yongdi Dang, Yi Zhou, Yubo Wang, Junjie Zhan, Jiaqi Yu, Bing-Feng Ju, Yungui Ma

Abstract: The out-of-band energy loss caused by in-built color filters significantly degrades the signal-to-noise ratio and the dynamic range of conventional image sensors, which has restricted the attempt to develop ultrahigh-density imaging devices by merely shrinking the pixel size. This issue will be more serious for security cameras which need to collect visible (VIS) light and near-infrared (NIR) phot… ▽ More The out-of-band energy loss caused by in-built color filters significantly degrades the signal-to-noise ratio and the dynamic range of conventional image sensors, which has restricted the attempt to develop ultrahigh-density imaging devices by merely shrinking the pixel size. This issue will be more serious for security cameras which need to collect visible (VIS) light and near-infrared (NIR) photons as well. The existing solutions mostly explore complex photonic nanostructures, which are often too complicated for production. In this work, we demonstrate a pixel-scale spectral router utilizing two-dimensional (2D) Si3N4 Mie scattering metagratings that can spatially divide NIR (850 nm) and VIS (400-700 nm) light to different pixels at high efficiencies. It has a minimum feature size larger than 360 nm, highly promising for massive production. Compared with the traditional filter design, our router can gain about 42% and 30% signal enhancement for NIR and VIS band, respectively. We show that it also has good polarization insensitivity and incident angle tolerance. The NIR-VIS simultaneous imaging is inspected without any complex reconstruction algorithm. Mode analysis indicates that the multipolar scattering of our Mie-type metagratings provides the necessary degrees of freedom to spatially optimize the routing functions for broadband photons. △ Less

Submitted 24 June, 2024; v1 submitted 19 June, 2024; originally announced June 2024.

Journal ref: Laser and Photonics Reviews 17, 2300027(2023)

PRESTO: Progressive Pretraining Enhances Synthetic Chemistry Outcomes

Authors: He Cao, Yanjun Shao, Zhiyuan Liu, Zijing Liu, Xiangru Tang, Yuan Yao, Yu Li

Abstract: Multimodal Large Language Models (MLLMs) have seen growing adoption across various scientific disciplines. These advancements encourage the investigation of molecule-text modeling within synthetic chemistry, a field dedicated to designing and conducting chemical reactions to synthesize new compounds with desired properties and applications. Current approaches, however, often neglect the critical r… ▽ More Multimodal Large Language Models (MLLMs) have seen growing adoption across various scientific disciplines. These advancements encourage the investigation of molecule-text modeling within synthetic chemistry, a field dedicated to designing and conducting chemical reactions to synthesize new compounds with desired properties and applications. Current approaches, however, often neglect the critical role of multiple molecule graph interaction in understanding chemical reactions, leading to suboptimal performance in synthetic chemistry tasks. This study introduces PRESTO(Progressive Pretraining Enhances Synthetic Chemistry Outcomes), a new framework that bridges the molecule-text modality gap by integrating a comprehensive benchmark of pretraining strategies and dataset configurations. It progressively improves multimodal LLMs through cross-modal alignment and multi-graph understanding. Our extensive experiments demonstrate that PRESTO offers competitive results in downstream synthetic chemistry tasks. The code can be found at https://github.com/IDEA-XL/PRESTO. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Good plasmons in a bad metal

Authors: Francesco L. Ruta, Yinming Shao, Swagata Acharya, Anqi Mu, Na Hyun Jo, Sae Hee Ryu, Daria Balatsky, Dimitar Pashov, Brian S. Y. Kim, Mikhail I. Katsnelson, James G. Analytis, Eli Rotenberg, Andrew J. Millis, Mark van Schilfgaarde, D. N. Basov

Abstract: Correlated materials may exhibit unusually high resistivity increasing linearly in temperature, breaking through the Mott-Ioffe-Regel bound, above which coherent quasiparticles are destroyed. The fate of collective charge excitations, or plasmons, in these systems is a subject of debate. Several studies suggest plasmons are overdamped while others detect unrenormalized plasmons. Here, we present d… ▽ More Correlated materials may exhibit unusually high resistivity increasing linearly in temperature, breaking through the Mott-Ioffe-Regel bound, above which coherent quasiparticles are destroyed. The fate of collective charge excitations, or plasmons, in these systems is a subject of debate. Several studies suggest plasmons are overdamped while others detect unrenormalized plasmons. Here, we present direct optical images of low-loss hyperbolic plasmon polaritons (HPPs) in the correlated van der Waals metal MoOCl2. HPPs are plasmon-photon modes that waveguide through extremely anisotropic media and are remarkably long-lived in MoOCl2. Many-body theory supported by photoemission results reveals that MoOCl2 is in an orbital-selective and highly incoherent Peierls phase. Different orbitals acquire markedly different bonding-antibonding character, producing a highly-anisotropic, isolated Fermi surface. The Fermi surface is further reconstructed and made partly incoherent by electronic interactions, renormalizing the plasma frequency. HPPs remain long-lived in spite of this, allowing us to uncover previously unseen imprints of electronic correlations on plasmonic collective modes. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Comments: 32 pages, 16 figures

A Phase Space Approach to Vibrational Circular Dichroism

Authors: Titouan Duston, Zhen Tao, Xuezhi Bian, Mansi Bhati, Jonathan Rawlinson, Robert G. Littlejohn, Zheng Pei, Yihan Shao, Joseph E. Subotnik

Abstract: We show empirically that a phase-space non-Born-Oppenheimer electronic Hamiltonian approach to quantum chemistry (where the electronic Hamiltonian is parameterized by both nuclear position and momentum, (H(R,P)) is both a practical and accurate means to recover vibrational circular dichroism spectra. We further hypothesize that such a phase space approach may lead to very new dynamical physics bey… ▽ More We show empirically that a phase-space non-Born-Oppenheimer electronic Hamiltonian approach to quantum chemistry (where the electronic Hamiltonian is parameterized by both nuclear position and momentum, (H(R,P)) is both a practical and accurate means to recover vibrational circular dichroism spectra. We further hypothesize that such a phase space approach may lead to very new dynamical physics beyond spectroscopy circular dichroism, with potential implications for understanding chiral induced spin selectivity (CISS), noting that classical phase space approaches conserve the total nuclear plus electronic momentum, whereas classical Born-Oppenheimer approaches do not (they conserve only the nuclear momentum) △ Less

Submitted 20 May, 2024; originally announced May 2024.

Comments: 46 pages, 5 figures

On the equivalence of two spinodal decomposition criteria with a case study of Fe${}_{15}$Co${}_{15}$Ni${}_{35}$Cu${}_{35}$ multicomponent alloy

Authors: Hengwei Luan, You Wu, Jingyi Kang, Liufei Huang, J. H. Luan, Jinfeng Li, Yang Shao, Ke-fu Yao, Jian Lu

Abstract: Spinodal decomposition in multicomponent alloys has attracted increasing attention due to its beneficial effect on their mechanical and functional properties and potential applications. Both based on the Cahn-Hillard equation, the reference element method (REM) and the projection matrix method (PMM) are the two main methods to predict the occurrence of spinodal decomposition in multicomponent allo… ▽ More Spinodal decomposition in multicomponent alloys has attracted increasing attention due to its beneficial effect on their mechanical and functional properties and potential applications. Both based on the Cahn-Hillard equation, the reference element method (REM) and the projection matrix method (PMM) are the two main methods to predict the occurrence of spinodal decomposition in multicomponent alloys. In this work, it is mathematically proven that the two methods are equivalent, and therefore the advanced results based on one method can be applied to the other. Based on these methods, the $Fe{}_{15}$Co${}_{15}$Ni${}_{35}$Cu${}_{35}$ multicomponent alloy is designed as a case study. Experimental results confirm the spinodal decomposition in the heat-treated alloy, and its strength and ductility are simultaneously enhanced. This work can be the pavement for further theoretical and experimental studies on the spinodal decomposition in multicomponent alloys. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Comments: 27 pages, 3 figures, 1 supplementary file

On-chip Real-time Hyperspectral Imager with Full CMOS Resolution Enabled by Massively Parallel Neural Network

Authors: Junren Wen, Haiqi Gao, Weiming Shi, Shuaibo Feng, Lingyun Hao, Yujie Liu, Liang Xu, Yuchuan Shao, Yueguang Zhang, Weidong Shen, Chenying Yang

Abstract: Traditional spectral imaging methods are constrained by the time-consuming scanning process, limiting the application in dynamic scenarios. One-shot spectral imaging based on reconstruction has been a hot research topic recently and the primary challenges still lie in both efficient fabrication techniques suitable for mass production and the high-speed, high-accuracy reconstruction algorithm for r… ▽ More Traditional spectral imaging methods are constrained by the time-consuming scanning process, limiting the application in dynamic scenarios. One-shot spectral imaging based on reconstruction has been a hot research topic recently and the primary challenges still lie in both efficient fabrication techniques suitable for mass production and the high-speed, high-accuracy reconstruction algorithm for real-time spectral imaging. In this study, we introduce an innovative on-chip real-time hyperspectral imager that leverages nanophotonic film spectral encoders and a Massively Parallel Network (MP-Net), featuring a 4 * 4 array of compact, all-dielectric film units for the micro-spectrometers. Each curved nanophotonic film unit uniquely modulates incident light across the underlying 3 * 3 CMOS image sensor (CIS) pixels, enabling a high spatial resolution equivalent to the full CMOS resolution. The implementation of MP-Net, specially designed to address variability in transmittance and manufacturing errors such as misalignment and non-uniformities in thin film deposition, can greatly increase the structural tolerance of the device and reduce the preparation requirement, further simplifying the manufacturing process. Tested in varied environments on both static and moving objects, the real-time hyperspectral imager demonstrates the robustness and high-fidelity spatial-spectral data capabilities across diverse scenarios. This on-chip hyperspectral imager represents a significant advancement in real-time, high-resolution spectral imaging, offering a versatile solution for applications ranging from environmental monitoring, remote sensing to consumer electronics. △ Less

Submitted 15 April, 2024; originally announced April 2024.

1-bit Quantized On-chip Hybrid Diffraction Neural Network Enabled by Authentic All-optical Fully-connected Architecture

Authors: Yu Shao, Haiqi Gao, Yipeng Chen, Yujie liu, Junren Wen, Haidong He, Yuchuan Shao, Yueguang Zhang, Weidong Shen, Chenying Yang

Abstract: Optical Diffraction Neural Networks (DNNs), a subset of Optical Neural Networks (ONNs), show promise in mirroring the prowess of electronic networks. This study introduces the Hybrid Diffraction Neural Network (HDNN), a novel architecture that incorporates matrix multiplication into DNNs, synergizing the benefits of conventional ONNs with those of DNNs to surmount the modulation limitations inhere… ▽ More Optical Diffraction Neural Networks (DNNs), a subset of Optical Neural Networks (ONNs), show promise in mirroring the prowess of electronic networks. This study introduces the Hybrid Diffraction Neural Network (HDNN), a novel architecture that incorporates matrix multiplication into DNNs, synergizing the benefits of conventional ONNs with those of DNNs to surmount the modulation limitations inherent in optical diffraction neural networks. Utilizing a singular phase modulation layer and an amplitude modulation layer, the trained neural network demonstrated remarkable accuracies of 96.39% and 89% in digit recognition tasks in simulation and experiment, respectively. Additionally, we develop the Binning Design (BD) method, which effectively mitigates the constraints imposed by sampling intervals on diffraction units, substantially streamlining experimental procedures. Furthermore, we propose an on-chip HDNN that not only employs a beam-splitting phase modulation layer for enhanced integration level but also significantly relaxes device fabrication requirements, replacing metasurfaces with relief surfaces designed by 1-bit quantization. Besides, we conceptualized an all-optical HDNN-assisted lesion detection network, achieving detection outcomes that were 100% aligned with simulation predictions. This work not only advances the performance of DNNs but also streamlines the path towards industrial optical neural network production. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Wavelength-multiplexed Multi-mode EUV Reflection Ptychography based on Automatic-Differentiation

Authors: Yifeng Shao, Sven Weerdenburg, Jacob Seifert, H. Paul Urbach, Allard P. Mosk, Wim Coene

Abstract: Ptychographic extreme ultraviolet (EUV) diffractive imaging has emerged as a promising candidate for the next-generation metrology solutions in the semiconductor industry, as it can image wafer samples in reflection geometry at the nanoscale. This technique has surged attention recently, owing to the significant progress in high-harmonic generation (HHG) EUV sources and advancements in both hardwa… ▽ More Ptychographic extreme ultraviolet (EUV) diffractive imaging has emerged as a promising candidate for the next-generation metrology solutions in the semiconductor industry, as it can image wafer samples in reflection geometry at the nanoscale. This technique has surged attention recently, owing to the significant progress in high-harmonic generation (HHG) EUV sources and advancements in both hardware and software for computation. In this study, a novel algorithm is introduced and tested, which enables wavelength-multiplexed reconstruction that enhances the measurement throughput and introduces data diversity, allowing the accurate characterisation of sample structures. To tackle the inherent instabilities of the HHG source, a modal approach was adopted, which represents the cross-density function of the illumination by a series of mutually incoherent and independent spatial modes. The proposed algorithm was implemented on a mainstream machine learning platform, which leverages automatic differentiation to manage the drastic growth in model complexity and expedites the computation using GPU acceleration. By optimising over 200 million parameters, we demonstrate the algorithm's capacity to accommodate experimental uncertainties and achieve a resolution approaching the diffraction limit in reflection geometry. The reconstruction of wafer samples with 20-nm heigh patterned gold structures on a silicon substrate highlights our ability to handle complex physical interrelations involving a multitude of parameters. These results establish ptychography as an efficient and accurate metrology tool. △ Less

Submitted 24 November, 2023; originally announced November 2023.

Noise-robust latent vector reconstruction in ptychography using deep generative models

Authors: Jacob Seifert, Yifeng Shao, Allard P. Mosk

Abstract: Computational imaging is increasingly vital for a broad spectrum of applications, ranging from biological to material sciences. This includes applications where the object is known and sufficiently sparse, allowing it to be described with a reduced number of parameters. When no explicit parameterization is available, a deep generative model can be trained to represent an object in a low-dimensiona… ▽ More Computational imaging is increasingly vital for a broad spectrum of applications, ranging from biological to material sciences. This includes applications where the object is known and sufficiently sparse, allowing it to be described with a reduced number of parameters. When no explicit parameterization is available, a deep generative model can be trained to represent an object in a low-dimensional latent space. In this paper, we harness this dimensionality reduction capability of autoencoders to search for the object solution within the latent space rather than the object space. We demonstrate a novel approach to ptychographic image reconstruction by integrating a deep generative model obtained from a pre-trained autoencoder within an Automatic Differentiation Ptychography (ADP) framework. This approach enables the retrieval of objects from highly ill-posed diffraction patterns, offering an effective method for noise-robust latent vector reconstruction in ptychography. Moreover, the mapping into a low-dimensional latent space allows us to visualize the optimization landscape, which provides insight into the convexity and convergence behavior of the inverse problem. With this work, we aim to facilitate new applications for sparse computational imaging such as when low radiation doses or rapid reconstructions are essential. △ Less

Submitted 14 January, 2024; v1 submitted 18 October, 2023; originally announced November 2023.

Journal ref: Opt. Express 32(1), 1020-1033 (2024)

Generative ensemble deep learning severe weather prediction from a deterministic convection-allowing model

Authors: Yingkai Sha, Ryan A. Sobash, David John Gagne II

Abstract: An ensemble post-processing method is developed for the probabilistic prediction of severe weather (tornadoes, hail, and wind gusts) over the conterminous United States (CONUS). The method combines conditional generative adversarial networks (CGANs), a type of deep generative model, with a convolutional neural network (CNN) to post-process convection-allowing model (CAM) forecasts. The CGANs are d… ▽ More An ensemble post-processing method is developed for the probabilistic prediction of severe weather (tornadoes, hail, and wind gusts) over the conterminous United States (CONUS). The method combines conditional generative adversarial networks (CGANs), a type of deep generative model, with a convolutional neural network (CNN) to post-process convection-allowing model (CAM) forecasts. The CGANs are designed to create synthetic ensemble members from deterministic CAM forecasts, and their outputs are processed by the CNN to estimate the probability of severe weather. The method is tested using High-Resolution Rapid Refresh (HRRR) 1--24 hr forecasts as inputs and Storm Prediction Center (SPC) severe weather reports as targets. The method produced skillful predictions with up to 20% Brier Skill Score (BSS) increases compared to other neural-network-based reference methods using a testing dataset of HRRR forecasts in 2021. For the evaluation of uncertainty quantification, the method is overconfident but produces meaningful ensemble spreads that can distinguish good and bad forecasts. The quality of CGAN outputs is also evaluated. Results show that the CGAN outputs behave similarly to a numerical ensemble; they preserved the inter-variable correlations and the contribution of influential predictors as in the original HRRR forecasts. This work provides a novel approach to post-process CAM output using neural networks that can be applied to severe weather prediction. △ Less

Submitted 7 March, 2024; v1 submitted 9 October, 2023; originally announced October 2023.

Visualizing moiré ferroelectricity via plasmons and nano-photocurrent in graphene/twisted-WSe2 structures

Authors: Shuai Zhang, Yang Liu, Zhiyuan Sun, Xinzhong Chen, Baichang Li, S. L. Moore, Song Liu, Zhiying Wang, S. E. Rossi, Ran Jing, Jordan Fonseca, Birui Yang, Yinming Shao, Chun-Ying Huang, Taketo Handa, Lin Xiong, Matthew Fu, Tsai-Chun Pan, Dorri Halbertal, Xinyi Xu, Wenjun Zheng, P. J. Schuck, A. N. Pasupathy, C. R. Dean, Xiaoyang Zhu , et al. (6 additional authors not shown)

Abstract: Ferroelectricity, a spontaneous and reversible electric polarization, is found in certain classes of van der Waals (vdW) material heterostructures. The discovery of ferroelectricity in twisted vdW layers provides new opportunities to engineer spatially dependent electric and optical properties associated with the configuration of moiré superlattice domains and the network of domain walls. Here, we… ▽ More Ferroelectricity, a spontaneous and reversible electric polarization, is found in certain classes of van der Waals (vdW) material heterostructures. The discovery of ferroelectricity in twisted vdW layers provides new opportunities to engineer spatially dependent electric and optical properties associated with the configuration of moiré superlattice domains and the network of domain walls. Here, we employ near-field infrared nano-imaging and nano-photocurrent measurements to study ferroelectricity in minimally twisted WSe2. The ferroelectric domains are visualized through the imaging of the plasmonic response in a graphene monolayer adjacent to the moiré WSe2 bilayers. Specifically, we find that the ferroelectric polarization in moiré domains is imprinted on the plasmonic response of the graphene. Complementary nano-photocurrent measurements demonstrate that the optoelectronic properties of graphene are also modulated by the proximal ferroelectric domains. Our approach represents an alternative strategy for studying moiré ferroelectricity at native length scales and opens promising prospects for (opto)electronic devices. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Comments: 19 pages, 3 figures

Journal ref: Nature Communications 14, 6200 (2023)

Electromagnetic Spatiotemporal Differentiators

Authors: Yi Zhou, Junjie Zhan, Ziyang Xu, Yifan Shao, Yubo Wang, Yongdi Dang, Sen Zhang, Yungui Ma

Abstract: Spatiotemporal optical computing devices which could perform mathematical operations in both spatial and temporal domains can provide unprecedented measures to build efficient and real-time information processing systems. It is particularly important to realize the comprehensive functions in a compact design for better integration with electronic components. In this work, we experimentally demonst… ▽ More Spatiotemporal optical computing devices which could perform mathematical operations in both spatial and temporal domains can provide unprecedented measures to build efficient and real-time information processing systems. It is particularly important to realize the comprehensive functions in a compact design for better integration with electronic components. In this work, we experimentally demonstrated an analogue spatiotemporal differentiator in microwaves based on an asymmetrical metasurface which has a phase singularity in the spatiotemporal domain. We showed that this structure could give rise to a spatiotemporal transfer function required by an ideal first-order differentiator in both spatial and temporal domains by tailoring the unidirectional excitation of spoof surface plasmon polaritons (SSPPs). The spatial edge detection was performed utilizing a metallic slit and the temporal differentiation capability of the device was examined by Gaussian-like temporal pulses of different width. We further confirmed the differentiator demonstrated here could detect sharp changes of spatiotemporal pulses even with intricate profiles and theoretically estimated the resolution limits of the spatial and temporal edge detection. We also show that the pulse input after passing the spatiotemporal differentiator implemented here could carry a transverse orbital angular momentum (OAM) with a fractal topology charge which further increases the information quantity. △ Less

Submitted 4 August, 2023; originally announced August 2023.

Comments: 6 figures

Maximum-likelihood estimation in ptychography in the presence of Poisson-Gaussian noise statistics

Authors: Jacob Seifert, Yifeng Shao, Rens van Dam, Dorian Bouchet, Tristan van Leeuwen, Allard P. Mosk

Abstract: Optical measurements often exhibit mixed Poisson-Gaussian noise statistics, which hampers image quality, particularly under low signal-to-noise ratio (SNR) conditions. Computational imaging falls short in such situations when solely Poissonian noise statistics are assumed. In response to this challenge, we define a loss function that explicitly incorporates this mixed noise nature. By using maximu… ▽ More Optical measurements often exhibit mixed Poisson-Gaussian noise statistics, which hampers image quality, particularly under low signal-to-noise ratio (SNR) conditions. Computational imaging falls short in such situations when solely Poissonian noise statistics are assumed. In response to this challenge, we define a loss function that explicitly incorporates this mixed noise nature. By using maximum-likelihood estimation, we devise a practical method to account for camera readout noise in gradient-based ptychography optimization. Our results, based on both experimental and numerical data, demonstrate that this approach outperforms the conventional one, enabling enhanced image reconstruction quality under challenging noise conditions through a straightforward methodological adjustment. △ Less

Submitted 11 October, 2023; v1 submitted 3 August, 2023; originally announced August 2023.

Comments: Contains main and supplementary documents

Journal ref: Opt. Lett. 48, 6027-6030 (2023)

Intrinsic Electronic Properties of BN Encapsulated, van der Waals Contacted MoSe$_2$ FETs

Authors: Yinjiang Shao, Jian Zhou, Ning Xu, Jian Chen, Kenji Watanabe, Takashi Taniguchi, Yi Shi, Songlin Li

Abstract: Two-dimensional (2D) semiconductors have attracted considerable interest for their unique physical properties. Here, we report the intrinsic cryogenic electronic transport properties in few-layer MoSe$_2$ field-effect transistors (FETs) that are simultaneously van der Waals contacted with gold electrodes and are fully encapsulated in ultraclean hexagonal boron nitride dielectrics. The FETs exhibit… ▽ More Two-dimensional (2D) semiconductors have attracted considerable interest for their unique physical properties. Here, we report the intrinsic cryogenic electronic transport properties in few-layer MoSe$_2$ field-effect transistors (FETs) that are simultaneously van der Waals contacted with gold electrodes and are fully encapsulated in ultraclean hexagonal boron nitride dielectrics. The FETs exhibit electronically favorable channel/dielectric interfaces with low densities of interfacial traps ($10^{10}\,$cm$^{-2}$), which lead to outstanding device characteristics at room temperature, including a near-Boltzmann-limit subthreshold swings ($\lt65\,$mV/dec), a high carrier mobility ($68\,$cm$^{2}\cdot$V$^{-1}\cdot$s$^{-1}$), and a negligible scanning hysteresis ($\lt15\,$mV). The dependence of various contact-related quantities on temperature and carrier density are also systematically characterized to understand the van der Waals contacts between gold and MoSe$_2$. The results provide insightful information on the device physics in van der Waals contacted and encapsulated 2D FETs. △ Less

Submitted 25 June, 2023; originally announced June 2023.

Comments: 14 pages, 4 figures

Journal ref: Chinese Physics Letters, 40, 068501 (2023)

PiNNwall: Heterogeneous Electrode Models from Integrating Machine Learning and Atomistic Simulation

Authors: Thomas Dufils, Lisanne Knijff, Yunqi Shao, Chao Zhang

Abstract: Electrochemical energy storage always involves the capacitive process. The prevailing electrode model used in the molecular simulation of polarizable electrode-electrolyte systems is the Siepmann-Sprik model developed for perfect metal electrodes. This model has been recently extended to study the metallicity in the electrode by including the Thomas-Fermi screening length. Nevertheless, a further… ▽ More Electrochemical energy storage always involves the capacitive process. The prevailing electrode model used in the molecular simulation of polarizable electrode-electrolyte systems is the Siepmann-Sprik model developed for perfect metal electrodes. This model has been recently extended to study the metallicity in the electrode by including the Thomas-Fermi screening length. Nevertheless, a further extension to heterogeneous electrode models requires introducing chemical specificity, which does not have any analytical recipes. Here, we address this challenge by integrating the atomistic machine learning code (PiNN) for generating the base charge and response kernel and the classical molecular dynamics code (MetalWalls) dedicated to the modeling of electrochemical systems, and this leads to the development of the PiNNwall interface. Apart from the cases of chemically doped graphene and graphene oxide electrodes as shown in this study, the PiNNwall interface also allows us to probe polarized oxide surfaces in which both the proton charge and the electronic charge can coexist. Therefore, this work opens the door for modeling heterogeneous and complex electrode materials often found in energy storage systems. △ Less

Submitted 1 October, 2023; v1 submitted 27 March, 2023; originally announced March 2023.

Journal ref: J. Chem. Theory Comput., 2023, 19: 5199

Aerodynamic performance enhancement and noise reduction for Darrieus vertical axis wind turbines: V-shaped blades and trailing-edge serrations

Authors: Jie Su, Yu Tu, Limin Kuang, Rui Zhang, Yixiao Shao, Dai Zhou, Zhaolong Han, Kai Zhang

Abstract: The Darrieus vertical axis wind turbines (VAWTs) are one of the mainstream devices for wind energy utilization in the urban areas. The market's pursuit of high wind energy conversion efficiency promotes the research on improving the wind turbine power coefficient while reducing noise. This paper makes further investigation on the aerodynamics and aeroacoustics of a small VAWT with V-shaped blades… ▽ More The Darrieus vertical axis wind turbines (VAWTs) are one of the mainstream devices for wind energy utilization in the urban areas. The market's pursuit of high wind energy conversion efficiency promotes the research on improving the wind turbine power coefficient while reducing noise. This paper makes further investigation on the aerodynamics and aeroacoustics of a small VAWT with V-shaped blades and trailing-edge serrations. The feasibility of utilizing the Reynolds-Averaged Navier-Stokes SST k-omega turbulence model and the FW-H method is verified against experiments. The studied V-shaped blades can effectively improve the power performance of VAWT over a wide range of tip speed ratios under normal wind speed conditions, and the trailing-edge serrations will also slightly increase the power output of V-bladed VAWT at the optimal tip speed ratio. The power coefficient of the V-bladed wind turbine with trailing-edge serrations is about 28.3% higher than that of the original turbine. In addition, a dumbbell-shaped noise directivity distribution was first discovered in the VAWT compared with the traditional elliptical distribution. The V-bladed VAWT generated less low-frequency noise and the trailing-edge serrations realized the expected noise reduction effect. Practically, this study proposes a feasible solution for the design of high-efficiency and low-noise wind turbines. △ Less

Submitted 19 February, 2023; originally announced February 2023.

Bruce-Vincent transference numbers from molecular dynamics simulations

Authors: Yunqi Shao, Chao Zhang

Abstract: Transference number is a key design parameter for electrolyte materials used in electrochemical energy storage systems. However, the determination of the true transference number from experiments is rather demanding. On the other hand, the Bruce-Vincent method is widely used in the lab to measure transference numbers of polymer electrolytes approximately, which becomes exact in the limit of infini… ▽ More Transference number is a key design parameter for electrolyte materials used in electrochemical energy storage systems. However, the determination of the true transference number from experiments is rather demanding. On the other hand, the Bruce-Vincent method is widely used in the lab to measure transference numbers of polymer electrolytes approximately, which becomes exact in the limit of infinite dilution. Therefore, theoretical formulations to treat the Bruce-Vincent transference number and the true transference number on an equal footing are clearly needed. Here we show how the Bruce-Vincent transference number for concentrated electrolyte solutions can be derived in terms of the Onsager coefficients, without involving any extrathermodynamic assumptions. By demonstrating it for the case of PEO-LiTFSI system, this work opens the door to calibrating molecular dynamics (MD) simulations via reproducing the Bruce-Vincent transference number and using MD simulations as a predictive tool for determining the true transference number. △ Less

Submitted 26 April, 2023; v1 submitted 14 February, 2023; originally announced February 2023.

Journal ref: J. Chem. Phys. 158, 161104 (2023)

In-plane anisotropy in biaxial ReS2 crystals probed by nano-optical imaging of waveguide modes

Authors: Fabian Mooshammer, Sanghoon Chae, Shuai Zhang, Yinming Shao, Siyuan Qiu, Anjaly Rajendran, Aaron J. Sternbach, Daniel J. Rizzo, Xiaoyang Zhu, P. James Schuck, James C. Hone, D. N. Basov

Abstract: Near-field imaging has emerged as a reliable probe of the dielectric function of van der Waals crystals. In principle, analyzing the propagation patterns of subwavelength waveguide modes (WMs) allows for extraction of the full dielectric tensor. Yet previous studies have mostly been restricted to high-symmetry materials or narrowband probing. Here, we resolve in-plane anisotropic WMs in thin rheni… ▽ More Near-field imaging has emerged as a reliable probe of the dielectric function of van der Waals crystals. In principle, analyzing the propagation patterns of subwavelength waveguide modes (WMs) allows for extraction of the full dielectric tensor. Yet previous studies have mostly been restricted to high-symmetry materials or narrowband probing. Here, we resolve in-plane anisotropic WMs in thin rhenium disulfide (ReS2) crystals across a wide range of near-infrared frequencies. By tracing the evolution of these modes as a function of crystallographic direction, polarization of the electric field and sample thickness, we have determined the anisotropic dielectric tensor including the elusive out-of-plane response. The excitonic absorption at ~1.5 eV manifests itself as a clear backbending feature in the WM dispersion and a reduction of the quality factors as fully supported by numerical calculations. Our results extend the sensitivity of near-field microscopy towards biaxial anisotropy and provide key insights into the optoelectronic properties of ReS2. △ Less

Submitted 6 February, 2023; originally announced February 2023.

Comments: This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Photonics (copyright ©American Chemical Society) after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acsphotonics.1c01841

Journal ref: ACS Photonics 9, 443-451 (2022)

Smooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis

Authors: Zeming Sun, Zhaslan Baraissov, Ryan D. Porter, Liana Shpani, Yu-Tsun Shao, Thomas Oseroff, Michael O. Thompson, David A. Muller, Matthias U. Liepe

Abstract: Workbench-size particle accelerators, enabled by Nb3Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and X-rays. Thin-film Nb3Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices.… ▽ More Workbench-size particle accelerators, enabled by Nb3Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and X-rays. Thin-film Nb3Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices. However, surface roughness, non-stoichiometry, and impurities in Nb3Sn deposited by conventional Sn-vapor diffusion prevent them from reaching their theoretical capabilities. Here we demonstrate a seed-free electrochemical synthesis that pushes the limit of chemical and physical properties in Nb3Sn. Utilization of electrochemical Sn pre-deposits reduces the roughness of converted Nb3Sn by five times compared to typical vapor-diffused Nb3Sn. Quantitative mappings using chemical and atomic probes confirm improved stoichiometry and minimized impurity concentrations in electrochemically synthesized Nb3Sn. We have successfully applied this Nb3Sn to the large-scale 1.3 GHz SRF cavity and demonstrated ultra-low BCS surface resistances at multiple operation temperatures, notably lower than vapor-diffused cavities. Our smooth, homogeneous, high-purity Nb3Sn provides the route toward high efficiency and high fields for SRF applications under helium-free cryogenic operations. △ Less

Submitted 5 September, 2023; v1 submitted 3 February, 2023; originally announced February 2023.

Journal ref: Superconductor Science and Technology, 2023

Modeling and analysis of ensemble average solvation energy and solute-solvent interfacial fluctuations

Authors: Yuanzhen Shao, Zhan Shao, Shan Zhao

Abstract: ariational implicit solvation models (VISM) have gained extensive popularity in the molecular-level solvation analysis of biological systems due to their cost-effectiveness and satisfactory accuracy. Central in the construction of VISM is an interface separating the solute and the solvent. However, traditional sharp-interface VISMs fall short in adequately representing the inherent randomness of t… ▽ More ariational implicit solvation models (VISM) have gained extensive popularity in the molecular-level solvation analysis of biological systems due to their cost-effectiveness and satisfactory accuracy. Central in the construction of VISM is an interface separating the solute and the solvent. However, traditional sharp-interface VISMs fall short in adequately representing the inherent randomness of the solute-solvent interface, a consequence of thermodynamic fluctuations within the solute-solvent system. Given that experimentally observable quantities are ensemble-averaged, the computation of the ensemble average solvation energy (EASE)-the averaged solvation energy across all thermodynamic microscopic states-emerges as a key metric for reflecting thermodynamic fluctuations during solvation processes. This study introduces a novel approach to calculating the EASE. We devise two diffuse-interface VISMs: one within the classic Poisson-Boltzmann (PB) framework and another within the framework of size-modified PB theory, accounting for the finite-size effects. The construction of these models relies on a new diffuse interface definition $u(x)$, which represents the probability of a point $x $ found in the solute phase among all microstates. Drawing upon principles of statistical mechanics and geometric measure theory, we rigorously demonstrate that the proposed models effectively capture EASE during the solvation process. Moreover, preliminary analyses indicate that the size-modified EASE functional surpasses its counterpart based on classic PB theory across various analytic aspects. Our work is the first step towards calculating EASE through the utilization of diffuse-interface VISM. energy by using diffuse-interface VISMs. △ Less

Submitted 8 December, 2023; v1 submitted 5 January, 2023; originally announced January 2023.

MSC Class: Primary: 49Q10; Secondary: 35J20; 92C40

Resonance-induced acceleration of the RBNE-BNE segregation inversion of granular mixtures

Authors: Yufei Shao, Anghao Li, Zaizheng Wang, Min Sun, Decai Huang

Abstract: This paper presents the experiments and simulations on the resonance-induced acceleration of the reverse Brazil nut effect (RBNE)-Brazil nut effect (BNE) segregation inversion of binary mixtures in flat-bottom and circular-bottom containers. Both experimental and simulation results indicate that the starting location of the sinkage of heavier grains at the top layer is triggered with certain rando… ▽ More This paper presents the experiments and simulations on the resonance-induced acceleration of the reverse Brazil nut effect (RBNE)-Brazil nut effect (BNE) segregation inversion of binary mixtures in flat-bottom and circular-bottom containers. Both experimental and simulation results indicate that the starting location of the sinkage of heavier grains at the top layer is triggered with certain randomness in the flat-bottom container, whereas it first occurs at either of the lateral edges of the bottom in the circular-bottom container. The quantified segregation factors in simulations show that the transition from the RBNE segregation state to the BNE segregation state happens faster in the circular-bottom container than that in the flat-bottom container. The occurrence of standing-wave resonant spots of higher and lower granular temperature accelerates the RBNE-BNE segregation inversion. From the elastic collision model of single grain, the bottom with a larger angle leads to more energy transfer from the vertical direction to the horizontal direction. The theoretical predictions are confirmed by the simulations of a monodisperse granular bed. The flat-bottom container has a uniform distribution with a standing-wave period of granular temperature and packing density, whereas the circular-bottom container possesses a higher granular temperature in the horizontal direction and a lower packing density at the lateral edges of the circular bottom. Owing to the buoyancy effect, heavier grains easily sink first at the resonant spots with higher temperature. △ Less

Submitted 16 September, 2022; originally announced September 2022.

Comments: 12 pages, 10 figures

MSC Class: 76T25

Observation of SQUID-like behavior in fiber laser with intra-cavity epsilon-near-zero effect

Authors: Jiaye Wu, Xuanyi Liu, Boris A. Malomed, Kuan-Chang Chang, Minghe Zhao, Kang Qi, Yanhua Sha, Ze Tao Xie, Marco Clementi, Camille-Sophie Brès, Shengdong Zhang, H. Y. Fu, Qian Li

Abstract: Establishing relations between fundamental effects in far-flung areas of physics is a subject of great interest in the current research. We here report realization of a novel photonic system akin to the radio-frequency superconducting quantum interference device (RF-SQUID), in a fiber laser cavity with epsilon-near-zero (ENZ) nanolayers as intra-cavity components. Emulating the RF-SQUID scheme, th… ▽ More Establishing relations between fundamental effects in far-flung areas of physics is a subject of great interest in the current research. We here report realization of a novel photonic system akin to the radio-frequency superconducting quantum interference device (RF-SQUID), in a fiber laser cavity with epsilon-near-zero (ENZ) nanolayers as intra-cavity components. Emulating the RF-SQUID scheme, the photonic counterpart of the supercurrent, represented by the optical wave, circulates in the cavity, passing through effective optical potential barriers. Different ENZ wavelengths translate into distinct spectral outputs through the variation of cavity resonances, emulating the situation with a frequency-varying tank circuit in the RF-SQUID. Due to the presence of the ENZ element, the optical potential barrier is far lower for selected frequency components, granting them advantage in the gain-resource competition. The findings reported in this work provide a deeper insight into the ultrafast ENZ photonics, revealing a new path towards the design of nanophotonic on-chip devices with various operational functions, and offer a new approach to study superconducting and quantum-mechanical systems. △ Less

Submitted 2 August, 2022; originally announced August 2022.

Comments: to be published in Laser & Photonics Reviews

Atomically imprinted graphene plasmonic cavities

Authors: Brian S. Y. Kim, Aaron J. Sternbach, Min Sup Choi, Zhiyuan Sun, Francesco L. Ruta, Yinming Shao, Alexander S. McLeod, Lin Xiong, Yinan Dong, Anjaly Rajendran, Song Liu, Ankur Nipane, Sang Hoon Chae, Amirali Zangiabadi, Xiaodong Xu, Andrew J. Millis, P. James Schuck, Cory. R. Dean, James C. Hone, D. N. Basov

Abstract: Plasmon polaritons in van der Waals (vdW) materials hold promise for next-generation photonics. The ability to deterministically imprint spatial patterns of high carrier density in cavities and circuitry with nanoscale features underlies future progress in nonlinear nanophotonics and strong light-matter interactions. Here, we demonstrate a general strategy to atomically imprint low-loss graphene p… ▽ More Plasmon polaritons in van der Waals (vdW) materials hold promise for next-generation photonics. The ability to deterministically imprint spatial patterns of high carrier density in cavities and circuitry with nanoscale features underlies future progress in nonlinear nanophotonics and strong light-matter interactions. Here, we demonstrate a general strategy to atomically imprint low-loss graphene plasmonic structures using oxidation-activated charge transfer (OCT). We cover graphene with a monolayer of WSe$_2$, which is subsequently oxidized into high work-function WOx to activate charge transfer. Nano-infrared imaging reveals low-loss plasmon polaritons at the WOx/graphene interface. We insert WSe$_2$ spacers to precisely control the OCT-induced carrier density and achieve a near-intrinsic quality factor of plasmons. Finally, we imprint canonical plasmonic cavities exhibiting laterally abrupt doping profiles with single-digit nanoscale precision via programmable OCT. Specifically, we demonstrate technologically appealing but elusive plasmonic whispering-gallery resonators based on free-standing graphene encapsulated in WOx. Our results open avenues for novel quantum photonic architectures incorporating two-dimensional materials. △ Less

Submitted 25 June, 2022; originally announced June 2022.

Comments: 17 pages, 4 figures

Efficient Second Harmonic Generation from Silicon Slotted Nanocubes with Bound States in the Continuum

Authors: C. Fang, Q. Yang, Q. Yuan, L. Gu, X. Gan, Y. Shao, Y. Liu, G. Han, Y. Hao

Abstract: Optical materials with centrosymmetry, such as silicon and germanium, are unfortunately absent of second-order nonlinear optical responses, hindering their developments in efficient nonlinear optical devices. Here, a design with an array of slotted nanocubes is proposed to realize remarkable second harmonic generation (SHG) from the centrosymmetric silicon, which takes advantage of enlarged surfac… ▽ More Optical materials with centrosymmetry, such as silicon and germanium, are unfortunately absent of second-order nonlinear optical responses, hindering their developments in efficient nonlinear optical devices. Here, a design with an array of slotted nanocubes is proposed to realize remarkable second harmonic generation (SHG) from the centrosymmetric silicon, which takes advantage of enlarged surface second-order nonlinearity, strengthened electric field over the surface of the air-slot, as well as the resonance enhancement by the bound states in the continuum. Compared with that from the array of silicon nanocubes without air-slots, SHG from the slotted nanocube array is improved by more than two orders of magnitude. The experimentally measured SHG efficiency of the silicon slotted nanocube array is high as 1.8*10^-4 W^-1, which is expected to be further engineered by modifying the air-slot geometries. Our result could provide a new strategy to expand nonlinear optical effects and devices of centrosymmetric materials. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Comments: 31 pages, 9 figures, 1 Table, 1 TOC

Journal ref: Laser Photonics Reviews 16(5) 2022, 2100498

High-Q Resonances Governed by the Quasi-Bound States in the Continuum in All-Dielectric Metasurfaces

Authors: C. Fang, Q. Yang, Q. Yuan, X. Gan, J. Zhao, Y. Shao, Y. Liu, G. Han, Y. Hao

Abstract: The realization of high-Q resonances in a silicon metasurface with various broken-symmetry blocks is reported. Theoretical analysis reveals that the sharp resonances in the metasurfaces originate from symmetry-protected bound states in the continuum (BIC) and the magnetic dipole dominates these peculiar states. A smaller size of the defect in the broken-symmetry block gives rise to the resonance w… ▽ More The realization of high-Q resonances in a silicon metasurface with various broken-symmetry blocks is reported. Theoretical analysis reveals that the sharp resonances in the metasurfaces originate from symmetry-protected bound states in the continuum (BIC) and the magnetic dipole dominates these peculiar states. A smaller size of the defect in the broken-symmetry block gives rise to the resonance with a larger Q factor. Importantly, this relationship can be tuned by changing the structural parameter, resulting from the modulation of the topological configuration of BICs. Consequently, a Q factor of more than 3,000 can be easily achieved by optimizing dimensions of the nanostructure. At this sharp resonance, the intensity of the third harmonic generation signal in the patterned structure can be 368 times larger than that of the flat silicon film. The proposed strategy and underlying theory can open up new avenues to realize ultrasharp resonances, which may promote the development of the potential meta-devices for nonlinearity, lasing action, and sensing. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Comments: 12 pages,5 figures

Journal ref: Opto-Electronic Advances 4 (2021) 200030

Infrared Plasmons Propagate through a Hyperbolic Nodal Metal

Authors: Yinming Shao, Aaron J. Sternbach, Brian S. Y. Kim, Andrey A. Rikhter, Xinyi Xu, Umberto De Giovannini, Ran Jing, Sang Hoon Chae, Zhiyuan Sun, Seng Huat Lee, Yanglin Zhu, Zhiqiang Mao, J. Hone, Raquel Queiroz, A. J. Millis, P. James Schuck, A. Rubio, M. M. Fogler, D. N. Basov

Abstract: Metals are canonical plasmonic media at infrared and optical wavelengths, allowing one to guide and manipulate light at the nano-scale. A special form of optical waveguiding is afforded by highly anisotropic crystals revealing the opposite signs of the dielectric functions along orthogonal directions. These media are classified as hyperbolic and include crystalline insulators, semiconductors and a… ▽ More Metals are canonical plasmonic media at infrared and optical wavelengths, allowing one to guide and manipulate light at the nano-scale. A special form of optical waveguiding is afforded by highly anisotropic crystals revealing the opposite signs of the dielectric functions along orthogonal directions. These media are classified as hyperbolic and include crystalline insulators, semiconductors and artificial metamaterials. Layered anisotropic metals are also anticipated to support hyperbolic waveguiding. Yet this behavior remains elusive, primarily because interband losses arrest the propagation of infrared modes. Here, we report on the observation of propagating hyperbolic waves in a prototypical layered nodal-line semimetal ZrSiSe. The observed waveguiding originates from polaritonic hybridization between near-infrared light and nodal-line plasmons. Unique nodal electronic structures simultaneously suppress interband loss and boost the plasmonic response, ultimately enabling the propagation of infrared modes through the bulk of the crystal. △ Less

Submitted 3 June, 2022; originally announced June 2022.

Journal ref: Sci. Adv. 8, eadd6169 (2022)

Towards compact phase-matched and waveguided nonlinear optics in atomically layered semiconductors

Authors: Xinyi Xu, Chiara Trovatello, Fabian Mooshammer, Yinming Shao, Shuai Zhang, Kaiyuan Yao, Dmitri N. Basov, Giulio Cerullo, P. James Schuck

Abstract: Nonlinear frequency conversion provides essential tools for light generation, photon entanglement, and manipulation. Transition metal dichalcogenides (TMDs) possess huge nonlinear susceptibilities and 3R-stacked TMD crystals further combine broken inversion symmetry and aligned layering, representing ideal candidates to boost the nonlinear optical gain with minimal footprint. Here, we report on th… ▽ More Nonlinear frequency conversion provides essential tools for light generation, photon entanglement, and manipulation. Transition metal dichalcogenides (TMDs) possess huge nonlinear susceptibilities and 3R-stacked TMD crystals further combine broken inversion symmetry and aligned layering, representing ideal candidates to boost the nonlinear optical gain with minimal footprint. Here, we report on the efficient frequency conversion of 3R-MoS2, revealing the evolution of its exceptional second-order nonlinear processes along the ordinary (in-plane) and extraordinary (out-of-plane) directions. By measuring second harmonic generation (SHG) of 3R-MoS2 with various thickness - from monolayer (~0.65 nm) to bulk (~1 μみゅーm) - we present the first measurement of the in-plane SHG coherence length (~530 nm) at 1520 nm and achieve record nonlinear optical enhancement from a van der Waals material, >10^4 stronger than a monolayer. It is found that 3R-MoS2 slabs exhibit similar conversion efficiencies of lithium niobate, but within propagation lengths >100-fold shorter at telecom wavelengths. Furthermore, along the extraordinary axis, we achieve broadly tunable SHG from 3R-MoS2 in a waveguide geometry, revealing the coherence length in such structure for the first time. We characterize the full refractive index spectrum and quantify both birefringence components in anisotropic 3R-MoS2 crystals with near-field nano-imaging. Empowered with these data we assess the intrinsic limits of the conversion efficiency and nonlinear optical processes in 3R-MoS2 attainable in waveguide geometries. Our analysis highlights the potential of 3R-stacked TMDs for integrated photonics, providing critical parameters for designing highly efficient on-chip nonlinear optical devices including periodically poled structures, resonators, compact optical parametric oscillators and amplifiers, and optical quantum circuits. △ Less

Submitted 26 April, 2022; originally announced April 2022.

Deep Learning-based Small Magnitude Earthquake Detection and Seismic Phase Classification

Authors: Wei Li, Yu Sha, Kai Zhou, Johannes Faber, Georg Ruempker, Horst Stoecker, Nishtha Srivastava

Abstract: Reliable earthquake detection and seismic phase classification is often challenging especially in the circumstances of low magnitude events or poor signal-to-noise ratio. With improved seismometers and better global coverage, a sharp increase in the volume of recorded seismic data is witnessed. This makes the handling of the seismic data rather daunting based on traditional approaches and therefor… ▽ More Reliable earthquake detection and seismic phase classification is often challenging especially in the circumstances of low magnitude events or poor signal-to-noise ratio. With improved seismometers and better global coverage, a sharp increase in the volume of recorded seismic data is witnessed. This makes the handling of the seismic data rather daunting based on traditional approaches and therefore fuels the need for a more robust and reliable method. In this study, we investigate two deep learningbased models, termed 1D ResidualNeuralNetwork (ResNet) and multi-branch ResNet, for tackling the problem of seismic signal detection and phase identification, especially the later can be used in the case where multiple classes is organized in the hierarchical format. These methods are trained and tested on the dataset of the Southern California Seismic Network. Results demonstrate that the proposed methods can achieve robust performance for the detection of seismic signals, and the identification of seismic phases, even when the seismic events are of small magnitude and are masked by noise. Compared with previously proposed deep learning methods, the introduced frameworks achieve 4% improvement in earthquake monitoring, and a slight enhancement in seismic phase classification. △ Less

Submitted 6 April, 2022; originally announced April 2022.

Transference number in polymer electrolytes: mind the reference-frame gap

Authors: Yunqi Shao, Harish Gudla, Daniel Brandell, Chao Zhang

Abstract: The transport coefficients, in particular the transference number, of electrolyte solutions are important design parameters for electrochemical energy storage devices. Recent observation of negative transference numbers in PEO-LiTFSI under certain conditions has generated much discussion about its molecular origins, by both experimental and theoretical means. However, one overlooked factor in thes… ▽ More The transport coefficients, in particular the transference number, of electrolyte solutions are important design parameters for electrochemical energy storage devices. Recent observation of negative transference numbers in PEO-LiTFSI under certain conditions has generated much discussion about its molecular origins, by both experimental and theoretical means. However, one overlooked factor in these efforts is the importance of the reference frame (RF). This creates a non-negligible gap when comparing experiment and simulation, because the fluxes in the experimental measurements of transport coefficients and in the linear response theory used in the molecular dynamics simulation are defined in different RFs. In this work, we show that by applying a proper RF transformation, a much improved agreement between experimental and simulation results can be achieved. Moreover, it is revealed that the anion mass and the anion-anion correlation, rather than ion aggregates, play a crucial role for the reported negative transference numbers. △ Less

Submitted 3 March, 2022; originally announced March 2022.

INAQS, a generic interface for non-adiabatic QM/MM dynamics: Design, implementation, and validation for GROMACS/Q-CHEM simulations

Authors: D. Vale Cofer-Shabica, Maximilian F. S. J. Menger, Qi Ou, Yihan Shao, Joseph E. Subotnik, Shirin Faraji

Abstract: The accurate description of large molecular systems in complex environments remains an ongoing challenge for the field of computational chemistry. This problem is even more pronounced for photo-induced processes, as multiple excited electronic states and their corresponding non-adiabatic couplings must be taken into account. Multiscale approaches such as hybrid quantum mechanics/molecular mechanic… ▽ More The accurate description of large molecular systems in complex environments remains an ongoing challenge for the field of computational chemistry. This problem is even more pronounced for photo-induced processes, as multiple excited electronic states and their corresponding non-adiabatic couplings must be taken into account. Multiscale approaches such as hybrid quantum mechanics/molecular mechanics (QM/MM) offer a balanced compromise between accuracy and computational burden. Here, we introduce an open-source software package (INAQS) for non-adiabatic QM/MM simulations that bridges the sampling capabilities of the GROMACS MD package and the excited-state infrastructure of the Q-CHEM electronic structure software. The interface is simple and can be adapted easily to other MD codes. The code supports a variety of different trajectory based molecular dynamics, ranging from Born-Oppenheimer to surface hopping dynamics. To illustrate the power of this combination, we simulate electronic absorption spectra, free energy surfaces along a reaction coordinate, and the excited state dynamics of 1,3-cyclohexadiene in solution. △ Less

Submitted 28 February, 2022; originally announced March 2022.

Comments: 45 pages, 7 figures

Very-High Dynamic Range, 10,000 frames/second Pixel Array Detector for Electron Microscopy

Authors: Hugh T. Philipp, Mark W. Tate, Katherine S. Shanks, Luigi Mele, Maurice Peemen, Pleun Dona, Reinout Hartong, Gerard van Veen, Yu-Tsun Shao, Zhen Chen, Julia Thom-Levy, David A. Muller, Sol M. Gruner

Abstract: Precision and accuracy of quantitative scanning transmission electron microscopy (STEM) methods such as ptychography, and the mapping of electric, magnetic and strain fields depend on the dose. Reasonable acquisition time requires high beam current and the ability to quantitatively detect both large and minute changes in signal. A new hybrid pixel array detector (PAD), the second-generation Electr… ▽ More Precision and accuracy of quantitative scanning transmission electron microscopy (STEM) methods such as ptychography, and the mapping of electric, magnetic and strain fields depend on the dose. Reasonable acquisition time requires high beam current and the ability to quantitatively detect both large and minute changes in signal. A new hybrid pixel array detector (PAD), the second-generation Electron Microscope Pixel Array Detector (EMPAD-G2), addresses this challenge by advancing the technology of a previous generation PAD, the EMPAD. The EMPAD-G2 images continuously at a frame-rates up to 10 kHzきろへるつ with a dynamic range that spans from low-noise detection of single electrons to electron beam currents exceeding 180 pA per pixel, even at electron energies of 300 keV. The EMPAD-G2 enables rapid collection of high-quality STEM data that simultaneously contain full diffraction information from unsaturated bright field disks to usable Kikuchi bands and higher-order Laue zones. Test results from 80 to 300 keV are presented, as are first experimental results demonstrating ptychographic reconstructions, strain and polarization maps. We introduce a new information metric, the Maximum Usable Imaging Speed (MUIS), to identify when a detector becomes electron-starved, saturated or its pixel count is mismatched with the beam current. △ Less

Submitted 10 November, 2021; originally announced November 2021.

Real-Time Wave Mitigation for Water-Air OWC Systems Via Beam Tracking

Authors: Yujie Di, Yingjie Shao, Lian-Kuan Chen

Abstract: In a water-air optical wireless communication (OWC) channel, dynamic ocean waves may significantly deflect the light beam from its original direction, thus deteriorating the communication performance. In this letter, a beam tracking system to mitigate wave-induced communication degradation is experimentally demonstrated. By employing the beam tracking on the PAM6 system, a maximum of 486% improvem… ▽ More In a water-air optical wireless communication (OWC) channel, dynamic ocean waves may significantly deflect the light beam from its original direction, thus deteriorating the communication performance. In this letter, a beam tracking system to mitigate wave-induced communication degradation is experimentally demonstrated. By employing the beam tracking on the PAM6 system, a maximum of 486% improvement (from 140 Mb/s to 820 Mb/s) in throughput is realized at a 1.2-m air distance for an average wave slope changing rate of 0.34 rad/s. For PAM4 signals, the packet loss rate reduces significantly from 75% to 11%, and a maximum throughput of 1.25 Gb/s is achieved. △ Less

Submitted 16 October, 2021; originally announced October 2021.

Training Algorithm Matters for the Performance of Neural Network Potential: A Case Study of Adam and the Kalman Filter Optimizers

Authors: Yunqi Shao, Florian M. Dietrich, Carl Nettelblad, Chao Zhang

Abstract: One hidden yet important issue for developing neural network potentials (NNPs) is the choice of training algorithm. Here we compare the performance of two popular training algorithms, the adaptive moment estimation algorithm (Adam) and the Extended Kalman Filter algorithm (EKF), using the Behler-Parrinello neural network (BPNN) and two publicly accessible datasets of liquid water [Proc. Natl. Acad… ▽ More One hidden yet important issue for developing neural network potentials (NNPs) is the choice of training algorithm. Here we compare the performance of two popular training algorithms, the adaptive moment estimation algorithm (Adam) and the Extended Kalman Filter algorithm (EKF), using the Behler-Parrinello neural network (BPNN) and two publicly accessible datasets of liquid water [Proc. Natl. Acad. Sci. U.S.A. 2016, 113, 8368-8373 and Proc. Natl. Acad. Sci. U.S.A. 2019, 116, 1110-1115]. This is achieved by implementing EKF in TensorFlow. It is found that NNPs trained with EKF are more transferable and less sensitive to the value of the learning rate, as compared to Adam. In both cases, error metrics of the validation set do not always serve as a good indicator for the actual performance of NNPs. Instead, we show that their performance correlates well with a Fisher information based similarity measure. △ Less

Submitted 9 November, 2021; v1 submitted 8 September, 2021; originally announced September 2021.

Importance of the ion-pair lifetime in polymer electrolytes

Authors: Harish Gudla, Yunqi Shao, Supho Phunnarungsi, Daniel Brandell, Chao Zhang

Abstract: Ion-pairing is commonly considered as a culprit for the reduced ionic conductivity in polymer electrolyte systems. However, this simple thermodynamic picture should not be taken literally, as ion-pairing is a dynamical phenomenon. Here we construct model PEO-LiTFSI systems with different degree of ion-pairing by tuning solvent polarity, and examine the relation between the cation-anion distinct co… ▽ More Ion-pairing is commonly considered as a culprit for the reduced ionic conductivity in polymer electrolyte systems. However, this simple thermodynamic picture should not be taken literally, as ion-pairing is a dynamical phenomenon. Here we construct model PEO-LiTFSI systems with different degree of ion-pairing by tuning solvent polarity, and examine the relation between the cation-anion distinct conductivity $σしぐま^\rm{d}_{+-}$ and the lifetime of ion-pairs $τたう_{+-}$ using molecular dynamics simulations. It is found that there exist two distinct regimes where $σしぐま^\rm{d}_{+-}$ scales with $1/τたう_{+-}$ and $τたう_{+-}$ respectively, and the latter is a signature of longer-lived ion-pairs which contribute negatively to the total ionic conductivity. This suggests that ion-pairs are kinetically different depending on the solvent polarity, which renders the ion-pair lifetime highly important when discussing its effect on ion transport in polymer electrolyte systems. △ Less

Submitted 28 August, 2021; v1 submitted 30 July, 2021; originally announced July 2021.

Journal ref: J. Phys. Chem. Lett., 2021, 12: 8460

Surface density-of-states on semi-infinite topological photonic and acoustic crystals

Authors: Yi-Xin Sha, Bo-Yuan Liu, Hao-Zhe Gao, Heng-Bin Cheng, Hai-Li Zhang, Ming-Yao Xia, Steven G. Johnson, Ling Lu

Abstract: Iterative Green's function, based on cyclic reduction of block tridiagonal matrices, has been the ideal algorithm, through tight-binding models, to compute the surface density-of-states of semi-infinite topological electronic materials. In this paper, we apply this method to photonic and acoustic crystals, using finite-element discretizations and a generalized eigenvalue formulation, to calculate… ▽ More Iterative Green's function, based on cyclic reduction of block tridiagonal matrices, has been the ideal algorithm, through tight-binding models, to compute the surface density-of-states of semi-infinite topological electronic materials. In this paper, we apply this method to photonic and acoustic crystals, using finite-element discretizations and a generalized eigenvalue formulation, to calculate the local density-of-states on a single surface of semi-infinite lattices. The three-dimensional (3D) examples of gapless helicoidal surface states in Weyl and Dirac crystals are shown and the computational cost, convergence and accuracy are analyzed. △ Less

Submitted 25 June, 2021; originally announced June 2021.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. B 104, 115131 (2021)

A consistent second-order hydrodynamic model in the time domain for floating structures with large horizontal motions

Authors: Yanlin Shao, Zhiping Zheng, Hui Liang, Jikang Chen

Abstract: Floating offshore structures often exhibit low-frequency oscillatory motions in the horizontal plane, with amplitudes in the same order as their characteristic dimensions and larger than the corresponding wave-frequency responses, making the traditional formulations in an inertial coordinate system inconsistent and less applicable. To address this issue, we extend and explore an alternative formul… ▽ More Floating offshore structures often exhibit low-frequency oscillatory motions in the horizontal plane, with amplitudes in the same order as their characteristic dimensions and larger than the corresponding wave-frequency responses, making the traditional formulations in an inertial coordinate system inconsistent and less applicable. To address this issue, we extend and explore an alternative formulation completely based on a non-inertial body-fixed coordinate system. Unlike the traditional seakeeping models, this formulation consistently allows for large-amplitude horizontal motions. A numerical model based on a higher-order boundary element is applied to solve the resulting boundary-value problems in the time domain. A recently developed new set of explicit time-integration methods, which do not necessitate the use of upwind schemes for spatial derivatives, are adopted to deal with the convective-type free-surface conditions. To suppress the weak saw-tooth instabilities on the free surface in time marching, we also present novel low-pass filters based on optimized weighted-least-squares, which are in principle applicable for both structured and unstructured meshes. The presented schemes for the convection equation and the low-pass filter are also relevant for other engineering fields dealing with similar mathematical problems. For ship seakeeping and added resistance analyses, we show that the present computational model does not need to use soft-springs for surge and sway, in contrast to the traditional models. For a floating monopile, the importance of consistently taking into account the effects of large horizontal motions is demonstrated considering the bi-chromatic incident waves. The present model is considered as a complete 2nd order wave-load model, as all the 2nd order wave loads, including the sum-frequency and difference-frequency components, are solved simultaneously. △ Less

Submitted 6 October, 2021; v1 submitted 16 June, 2021; originally announced June 2021.

Accurate and efficient hydrodynamic analysis of structures with sharp edges by the Extended Finite Element Method (XFEM): 2D studies

Authors: Ying Wang, Yanlin Shao, Jikang Chen, Hui Liang

Abstract: Achieving accurate numerical results of hydrodynamic loads based on the potential-flow theory is very challenging for structures with sharp edges, due to the singular behavior of the local-flow velocities. In this paper, we introduce the Extended Finite Element Method (XFEM) to solve fluid-structure interaction problems involving sharp edges on structures. Four different FEM solvers, including con… ▽ More Achieving accurate numerical results of hydrodynamic loads based on the potential-flow theory is very challenging for structures with sharp edges, due to the singular behavior of the local-flow velocities. In this paper, we introduce the Extended Finite Element Method (XFEM) to solve fluid-structure interaction problems involving sharp edges on structures. Four different FEM solvers, including conventional linear and quadratic FEMs as well as their corresponding XFEM versions with local enrichment by singular basis functions at sharp edges, are implemented and compared. To demonstrate the accuracy and efficiency of the XFEMs, a thin flat plate in an infinite fluid domain and a forced heaving rectangle at the free surface, both in two dimensions, will be studied. For the flat plate, the mesh convergence studies are carried out for both the velocity potential in the fluid domain and the added mass, and the XFEMs show apparent advantages thanks to their local enhancement at the sharp edges. Three different enrichment strategies are also compared, and suggestions will be made for the practical implementation of the XFEM. For the forced heaving rectangle, the linear and 2nd order mean wave loads are studied. Our results confirm the previous conclusion in the literature that it is not difficult for a conventional numerical model to obtain convergent results for added mass and damping coefficients. However, when the 2nd order mean wave loads requiring the computation of velocity components are calculated via direct pressure integration, it takes a tremendously large number of elements for the conventional FEMs to get convergent results. On the contrary, the numerical results of XFEMs converge rapidly even with very coarse meshes, especially for the quadratic XFEM. △ Less

Submitted 22 September, 2021; v1 submitted 16 June, 2021; originally announced June 2021.

Quantum-Electrodynamical Time-Dependent Density Functional Theory. I. A Gaussian Atomic Basis Implementation

Authors: Junjie Yang, Qi Ou, Zheng Pei, Hua Wang, Binbin Weng, Kieran Mullen, Yihan Shao

Abstract: Inspired by the formulation of quantum-electrodynamical time-dependent density functional theory (QED-TDDFT) by Rubio and coworkers, we propose an implementation that uses dimensionless amplitudes for describing the photonic contributions to QED-TDDFT electron-photon eigenstates. The leads to a symmetric QED-TDDFT coupling matrix, which is expected to facilitate the future development of analytic… ▽ More Inspired by the formulation of quantum-electrodynamical time-dependent density functional theory (QED-TDDFT) by Rubio and coworkers, we propose an implementation that uses dimensionless amplitudes for describing the photonic contributions to QED-TDDFT electron-photon eigenstates. The leads to a symmetric QED-TDDFT coupling matrix, which is expected to facilitate the future development of analytic derivatives. Through a Gaussian atomic basis implementation of the QED-TDDFT method, we examined the effect of dipole self-energy, rotating wave approximation, and the Tamm-Dancoff approximation on the QED-TDDFT eigenstates of model compounds (ethene, formaldehyde, and benzaldehyde) in an optical cavity. We highlight, in the strong coupling regime, the role of higher-energy and off-resonance excited states with large transition dipole moments in the direction of the photonic field, which are automatically accounted for in our QED-TDDFT calculations and might substantially affect the energy and composition of polaritons associated with lower-energy electronic states. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Comments: 23 pages, 6 figures and 5 tables

Ferroelectricity in Polar ScAlN/GaN Epitaxial Semiconductor Heterostructures

Authors: Joseph Casamento, Ved Gund, Hyunjea Lee, Kazuki Nomoto, Takuya Maeda, Benyamin Davaji, Mohammad Javad Asadi, John Wright, Yu-Tsun Shao, David A. Muller, Amit Lal, Huili, Xing, Debdeep Jena

Abstract: Room temperature ferroelectricity is observed in lattice-matched ~18% ScAlN/GaN heterostructures grown by molecular beam epitaxy on single-crystal GaN substrates. The epitaxial films have smooth surface morphologies and high crystallinity. Pulsed current-voltage measurements confirm stable and repeatable polarization switching in such ferroelectric/semiconductor structures at several measurement c… ▽ More Room temperature ferroelectricity is observed in lattice-matched ~18% ScAlN/GaN heterostructures grown by molecular beam epitaxy on single-crystal GaN substrates. The epitaxial films have smooth surface morphologies and high crystallinity. Pulsed current-voltage measurements confirm stable and repeatable polarization switching in such ferroelectric/semiconductor structures at several measurement conditions, and in multiple samples. The measured coercive field values are Ec~0.7 MV/cm at room temperature, with remnant polarization Pr~10 μみゅーC/cm2 for ~100 nm thick ScAlN layers. These values are substantially lower than comparable ScAlN control layers deposited by sputtering. Importantly, the coercive field of MBE ScAlN is smaller than the critical breakdown field of GaN, offering the potential for low voltage ferroelectric switching. The low coercive field ferroelectricity of ScAlN on GaN heralds the possibility of new forms of electronic and photonic devices with epitaxially integrated ferroelectric/semiconductor heterostructures that take advantage of the GaN electronic and photonic semiconductor platform, where the underlying semiconductors themselves exhibit spontaneous and piezoelectric polarization. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report

Authors: R. Abdul Khalek, A. Accardi, J. Adam, D. Adamiak, W. Akers, M. Albaladejo, A. Al-bataineh, M. G. Alexeev, F. Ameli, P. Antonioli, N. Armesto, W. R. Armstrong, M. Arratia, J. Arrington, A. Asaturyan, M. Asai, E. C. Aschenauer, S. Aune, H. Avagyan, C. Ayerbe Gayoso, B. Azmoun, A. Bacchetta, M. D. Baker, F. Barbosa, L. Barion , et al. (390 additional authors not shown)

Abstract: This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon… ▽ More This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and developing detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions. This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter △ Less

Submitted 26 October, 2021; v1 submitted 8 March, 2021; originally announced March 2021.

Comments: 902 pages, 415 authors, 151 institutions

Report number: BNL-220990-2021-FORE, JLAB-PHY-21-3198, LA-UR-21-20953

Journal ref: Nucl. Phys. A 1026 (2022) 122447

Lateral Drop Rebound on Hydrophobic and Chemically Heterogeneous Surface

Authors: Tingting Ji, Yongcai Pan, Yufu Shao, Bing He, Binghai Wen

Abstract: A drop rebounding from a hydrophobic and chemically heterogeneous surface is investigated using the multiphase lattice Boltzmann method. The behaviors of drop rebounding are dependent on the degrees of the hydrophobicity and heterogeneity of the surface. When the surface is homogeneous, the drop rebounds vertically and the height is getting higher and higher with increases of the surface hydrophob… ▽ More A drop rebounding from a hydrophobic and chemically heterogeneous surface is investigated using the multiphase lattice Boltzmann method. The behaviors of drop rebounding are dependent on the degrees of the hydrophobicity and heterogeneity of the surface. When the surface is homogeneous, the drop rebounds vertically and the height is getting higher and higher with increases of the surface hydrophobicity. When the surface consists of two different hydrophobic surfaces, the drop rebounds laterally towards the low hydrophobic side. The asymmetrical rebounding is because the unbalanced Young's force exerted on the contact line by the high hydrophobic side is greater than that by the low hydrophobic surface. A set of contours of momentum distribution illustrate the dynamic process of drop spreading, shrinking and rebounding. This work promotes the understanding of the rebound mechanism of a drop impacting the surface and also provides a guiding strategy for precisely controlling the lateral behavior of rebounding drops by hydrophobic degrees and heterogeneous surfaces. △ Less

Submitted 3 February, 2021; originally announced February 2021.

Comments: 26 pages, 11 figures, 7200 words

Experimental and numerical studies on kV scattered x-ray imaging for real-time image guidance in radiation therapy

Authors: Yanqi Huang, Kai Yang, Youfang Lai, Huan Liu, Chenyang Shen, Yuncheng Zhong, Yiping Shao, Xinhua Li, Bob Liu, Xun Jia

Abstract: Motion management is a critical component of image guidance radiotherapy for lung cancer. We previously proposed a scheme using kV scattered x-ray photons for marker-less real-time image guidance in lung cancer radiotherapy. This study reports our recently progress using the photon counting detection technique to demonstrate potential feasibility of this method and using Monte Carlo (MC) simulatio… ▽ More Motion management is a critical component of image guidance radiotherapy for lung cancer. We previously proposed a scheme using kV scattered x-ray photons for marker-less real-time image guidance in lung cancer radiotherapy. This study reports our recently progress using the photon counting detection technique to demonstrate potential feasibility of this method and using Monte Carlo (MC) simulations and ray-tracing calculations to characterize the performance. In our scheme, a thin slice of x-ray beam was directed to the target and we measured the outgoing scattered photons using a photon counting detector with a parallel-hole collimator to establish the correspondence between detector pixels and scatter positions. Image corrections of geometry, beam attenuation and scattering angle were performed to convert the raw image to the actual image of Compton attenuation coefficient. We set up a MC simulation system using an in-house developed GPU-based MC package modeling the image formation process. We also performed ray-tracing calculations to investigate the impacts of imaging system geometry on resulting image resolution. The experiment demonstrated feasibility of using a photon counting detector to measure scattered x-ray photons and generate the proposed scattered x-ray image. After correction, x-ray scattering image intensity and Compton scattering attenuation coefficient were linearly related, with R2=0.91. Contrast to Noise Ratios of different objects were improved and the values in experimental results and MC simulation results agreed with each other. Ray-tracing calculations revealed the dependence of image resolution on imaging geometry. The image resolution increases with reduced source to object distance and increased collimator height. The study demonstrated potential feasibility of using scattered x-ray imaging as a real-time image guidance method in radiation therapy. △ Less

Submitted 9 September, 2020; v1 submitted 5 August, 2020; originally announced August 2020.

Comments: 16 pages, 10 figures

Disentangling magnetic and grain contrast in polycrystalline FeGe thin films using four-dimensional Lorentz scanning transmission electron microscopy

Authors: Kayla X. Nguyen, Xiyue S. Zhang, Emrah Turgut, Michael C. Cao, Jack Glaser, Zhen Chen, Matthew J. Stolt, Celesta S. Chang, Yu-Tsun Shao, Song Jin, Gregory D. Fuchs, David A. Muller

Abstract: The study of nanoscale chiral magnetic order in polycrystalline materials with a strong Dzyaloshinkii-Moriya interaction (DMI) is interesting for the observation of magnetic phenomena at grain boundaries and interfaces. One such material is sputter-deposited B20 FeGe on Si, which has been actively investigated as the basis for low-power, high-density magnetic memory technology in a scalable materi… ▽ More The study of nanoscale chiral magnetic order in polycrystalline materials with a strong Dzyaloshinkii-Moriya interaction (DMI) is interesting for the observation of magnetic phenomena at grain boundaries and interfaces. One such material is sputter-deposited B20 FeGe on Si, which has been actively investigated as the basis for low-power, high-density magnetic memory technology in a scalable material platform. Although conventional Lorentz electron microscopy provides the requisite spatial resolution to probe chiral magnetic textures in single-crystal FeGe, probing the magnetism of sputtered B20 FeGe is more challenging because the sub-micron crystal grains add confounding contrast. We address the challenge of disentangling magnetic and grain contrast by applying 4-dimensional Lorentz scanning transmission electron microscopy using an electron microscope pixel array detector. Supported by analytical and numerical models, we find that the most important parameter for imaging magnetic materials with polycrystalline grains is the ability for the detector to sustain large electron doses, where having a high-dynamic range detector becomes extremely important. Despite the small grain size in sputtered B20 FeGe on Si, using this approach we are still able to observe helicity switching of skyrmions and magnetic helices across two adjacent grains as they thread through neighboring grains. We reproduce this effect using micromagnetic simulations by assuming that the grains have distinct orientation and magnetic chirality and find that magnetic helicity couples to crystal chirality. Our methodology for imaging magnetic textures is applicable to other thin-film magnets used for spintronics and memory applications, where an understanding of how magnetic order is accommodated in polycrystalline materials is important. △ Less

Submitted 7 March, 2022; v1 submitted 19 January, 2020; originally announced January 2020.

Comments: 22 pages, 8 figures, 2 appendix figures