Showing 1–50 of 178 results for author: Shi, J

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σしぐま$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Proposal for the generation of continuous-wave vacuum ultraviolet laser light for Th-229 isomer precision spectroscopy

Authors: Qi Xiao, Gleb Penyazkov, Ruihan Yu, Beichen Huang, Jiatong Li, Juanlang Shi, Yanmei Yu, Yuxiang Mo, Shiqian Ding

Abstract: We propose to generate continuous-wave vacuum ultraviolet (VUV) laser light at 148.4 nm using four-wave mixing in cadmium vapor for precision spectroscopy of the Th-229 isomer transition. Due to the large transition matrix elements of cadmium, the readily accessible wavelengths for the incident laser beams, and the high coherence of the four-wave mixing process, over 30 $μみゅー$W of VUV power can be ge… ▽ More We propose to generate continuous-wave vacuum ultraviolet (VUV) laser light at 148.4 nm using four-wave mixing in cadmium vapor for precision spectroscopy of the Th-229 isomer transition. Due to the large transition matrix elements of cadmium, the readily accessible wavelengths for the incident laser beams, and the high coherence of the four-wave mixing process, over 30 $μみゅー$W of VUV power can be generated with a narrow linewidth. This development paves the way for coherently driving the Th-229 isomer transition and developing the nuclear optical clock. △ Less

Submitted 24 June, 2024; originally announced June 2024.

XENONnT WIMP Search: Signal & Background Modeling and Statistical Inference

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad, J. J. Cuenca-García, V. D'Andrea , et al. (139 additional authors not shown)

Abstract: The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 t… ▽ More The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 tonne-years yielded no signal excess over background expectations, from which competitive exclusion limits were derived on WIMP-nucleon elastic scatter cross sections, for WIMP masses ranging from 6 GeV/$c^2$ up to the TeV/$c^2$ scale. This work details the modeling and statistical methods employed in this search. By means of calibration data, we model the detector response, which is then used to derive background and signal models. The construction and validation of these models is discussed, alongside additional purely data-driven backgrounds. We also describe the statistical inference framework, including the definition of the likelihood function and the construction of confidence intervals. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 20 pages, 10 figures

Multimer states in multilevel waveguide QED

Authors: Jiaming Shi, Alexander N. Poddubny

Abstract: We study theoretically the interplay of spontaneous emission and interactions for the multiple-excited quasistationary eigenstates in a finite periodic array of multilevel atoms coupled to the waveguide. We develop an analytical approach to calculate such eigenstates based on the subradiant dimer basis. Our calculations reveal the peculiar multimerization effect driven by the anharmonicity of the… ▽ More We study theoretically the interplay of spontaneous emission and interactions for the multiple-excited quasistationary eigenstates in a finite periodic array of multilevel atoms coupled to the waveguide. We develop an analytical approach to calculate such eigenstates based on the subradiant dimer basis. Our calculations reveal the peculiar multimerization effect driven by the anharmonicity of the atomic potential: while a general eigenstate is an entangled one, there exist eigenstates that are products of dimers, trimers, or tetramers, depending on the size of the system and the fill factor. At half-filling, these product states acquire a periodic structure with all-to-all connections inside each multimer and become the most subradiant ones. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 5 pages, 4 figures + Supplementary

Improving neutrino energy estimation of charged-current interaction events with recurrent neural networks in MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, A. Barnard, G. Barr, D. Barrow, J. Barrow, V. Basque, J. Bateman, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book , et al. (164 additional authors not shown)

Abstract: We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstr… ▽ More We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstructing and summing visible energies, often experience sizable biases and resolution smearing because of the complex nature of neutrino interactions and the detector response. The estimation of neutrino energy can be improved after considering the kinematics information of reconstructed final-state particles. Utilizing kinematic information of reconstructed particles, the deep learning-based approach shows improved resolution and reduced bias for the muon neutrino Monte Carlo simulation sample compared to the traditional approach. In order to address the common concern about the effectiveness of this method on experimental data, the RNN-based energy estimator is further examined and validated with dedicated data-simulation consistency tests using MicroBooNE data. We also assess its potential impact on a neutrino oscillation study after accounting for all statistical and systematic uncertainties and show that it enhances physics sensitivity. This method has good potential to improve the performance of other physics analyses. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Report number: FERMILAB-PUB-24-0287

Martian seismic anisotropy underneath Elysium Planitia revealed by direct S wave splitting

Authors: Jing Shi, Cunrui Han, Tao Wang, Chao Qi, Han Chen, Zhihan Yu, Jiaqi Geng, Minghan Yang, Xu Wang, Ling Chen, Hejiu Hui

Abstract: Seismic anisotropy, arising from the crystallographic or lattice-preferred orientation of anisotropic minerals or the shape-preferred orientation of melts or cracks, can establish a critical link between Mars's past evolution and its current state. So far, although seismic anisotropy in Mars has been proposed due to different velocities of vertically and horizontally polarized shear waves in the M… ▽ More Seismic anisotropy, arising from the crystallographic or lattice-preferred orientation of anisotropic minerals or the shape-preferred orientation of melts or cracks, can establish a critical link between Mars's past evolution and its current state. So far, although seismic anisotropy in Mars has been proposed due to different velocities of vertically and horizontally polarized shear waves in the Martian crust, obtained from crustal converted waves, multiples, and surface waves recorded by the InSight seismometer, the evidence is plausible. Notably, the shear wave splitting, which stands out as a straight indicator of seismic anisotropy, has not been reported using marsquake records. In this study, we employ Low-frequency marsquakes detected by the InSight seismometer to reveal shear wave splitting in Mars. We find that the direct S waves of three marsquake recordings (S0173a, S0235b, and S1133c) with high signal-to-noise ratios exhibit the splitting pheonmenon. We rule out the possibility of apparent anisotropy through synthetic tests, affirming the presence of seismic anisotropy in Mars. The delay time (about 1.33 s on average) measured from the direct S wave splitting is too large to be solely attributed to the seismic anisotropy in the upper crust (0 - 10 km) beneath the InSight. Thus, seismic anisotropy in the deeper region of Mars is indispensable. Combined with other geophysical evidence near the InSight landing site, the strong seismic anisotropy observed in this study implies the porous crust with aligned cracks being greater than 10 km beneath the InSight and/or the presence of an active mantle plume underneath the Elysium Planitia of Mars. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: Manuscript has been submitted to Earth and Planetary Science Letters; 9 figures; 33 pages

High efficient sunlight-driven CO2 hydrogenation to methanol over NiZn intermetallic catalysts under atmospheric pressure

Authors: Linjia Han, Fanqi Meng, Xianhua Bai, Qixuan Wu, Yanhong Luo, Jiangjian Shi, Yaguang Li, Dongmei Li, Qingbo Meng

Abstract: The synthesis of solar methanol through direct CO2 hydrogenation using solar energy is of great importance in advancing a sustainable energy economy. In this study, non-precious NiZn intermetallic/ZnO catalyst is reported to catalyze the hydrogenation of CO2 to methanol using sunlight irradiation (1sun). The NiZn-ZnO interface is identified as the active site to stabilize the key intermediates of… ▽ More The synthesis of solar methanol through direct CO2 hydrogenation using solar energy is of great importance in advancing a sustainable energy economy. In this study, non-precious NiZn intermetallic/ZnO catalyst is reported to catalyze the hydrogenation of CO2 to methanol using sunlight irradiation (1sun). The NiZn-ZnO interface is identified as the active site to stabilize the key intermediates of HxCO*. At ambient pressure, the NiZn-ZnO catalyst demonstrates a methanol production rate of 127.5 umol g-1h-1 from solar driven CO2 hydrogenation, with a remarkable 100% selectivity towards methanol in the total organic products. Notably, this production rate stands as the highest record for photothermic CO2 hydrogenation to methanol in continuous-flow reactors with sunlight as the only requisite energy input. This discovery not only paves the way for the development of novel catalysts for CO2 hydrogenation to methanol but also marks a significant stride towards a full solar-driven chemical energy storage. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Measurement of the differential cross section for neutral pion production in charged-current muon neutrino interactions on argon with the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, M. B. Brunetti, L. Camilleri , et al. (163 additional authors not shown)

Abstract: We present a measurement of neutral pion production in charged-current interactions using data recorded with the MicroBooNE detector exposed to Fermilab's booster neutrino beam. The signal comprises one muon, one neutral pion, any number of nucleons, and no charged pions. Studying neutral pion production in the MicroBooNE detector provides an opportunity to better understand neutrino-argon interac… ▽ More We present a measurement of neutral pion production in charged-current interactions using data recorded with the MicroBooNE detector exposed to Fermilab's booster neutrino beam. The signal comprises one muon, one neutral pion, any number of nucleons, and no charged pions. Studying neutral pion production in the MicroBooNE detector provides an opportunity to better understand neutrino-argon interactions, and is crucial for future accelerator-based neutrino oscillation experiments. Using a dataset corresponding to $6.86 \times 10^{20}$ protons on target, we present single-differential cross sections in muon and neutral pion momenta, scattering angles with respect to the beam for the outgoing muon and neutral pion, as well as the opening angle between the muon and neutral pion. Data extracted cross sections are compared to generator predictions. We report good agreement between the data and the models for scattering angles, except for an over-prediction by generators at muon forward angles. Similarly, the agreement between data and the models as a function of momentum is good, except for an underprediction by generators in the medium momentum ranges, $200-400$ MeV for muons and $100-200$ MeV for pions. △ Less

Submitted 6 May, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Report number: FERMILAB-PUB-24-0142-CSAID-PPD

Multi-interface engineering to realize all-solution processed highly efficient Kesterite solar cells

Authors: Licheng Lou, Kang Yin, Jinlin Wang, Yuan Li, Xiao Xu, Bowen Zhang, Menghan Jiao, Shudan Chen, Tan Guo, Jiangjian Shi, Huijue Wu, Yanhong Luo, Dongmei Li, Qingbo Meng

Abstract: With the rapid development of Kesterite Cu2ZnSn(S, Se)4 solar cells in the past few years, how to achieve higher cost-performance ratio has become an important topic in the future development and industrialization of this technology. Herein, we demonstrate an all-solution route for the cell fabrication, in particular targeting at the solution processed window layer comprised of ZnO nanoparticles/A… ▽ More With the rapid development of Kesterite Cu2ZnSn(S, Se)4 solar cells in the past few years, how to achieve higher cost-performance ratio has become an important topic in the future development and industrialization of this technology. Herein, we demonstrate an all-solution route for the cell fabrication, in particular targeting at the solution processed window layer comprised of ZnO nanoparticles/Ag nanowires. A multi-interface engineering strategy assisted by organic polymers and molecules is explored to synergistically improve the film deposition, passivate the surface defects and facilitate the charge transfer. These efforts help us achieve high-performance and robust Kesterite solar cells at extremely low time and energy costs, with efficiency records of 14.37% and 13.12% being realized in rigid and flexible Kesterite solar cells, respectively. Our strategy here is also promising to be transplanted into other solar cells with similar geometric and energy band structures, helping reduce production costs and shorten the production cycle (i.e. increasing production capacity) of these photovoltaic industries. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Vacancy enhanced cation ordering enables >15% efficiency in Kesterite solar cells

Authors: Jinlin Wang, Licheng Lou, Kang Yin, Fanqi Meng, Xiao Xu, Menghan Jiao, Bowen Zhang, Jiangjian Shi, Huijue Wu, Yanhong Luo, Dongmei Li, Qingbo Meng

Abstract: Atomic disorder, a widespread problem in compound crystalline materials, is a imperative affecting the performance of multi-chalcogenide Cu2ZnSn(S, Se)4 (CZTSSe) photovoltaic device known for its low cost and environmental friendliness. Cu-Zn disorder is particularly abundantly present in CZTSSe due to its extraordinarily low formation energy, having induced high-concentration deep defects and sev… ▽ More Atomic disorder, a widespread problem in compound crystalline materials, is a imperative affecting the performance of multi-chalcogenide Cu2ZnSn(S, Se)4 (CZTSSe) photovoltaic device known for its low cost and environmental friendliness. Cu-Zn disorder is particularly abundantly present in CZTSSe due to its extraordinarily low formation energy, having induced high-concentration deep defects and severe charge loss, while its regulation remains challenging due to the contradiction between disorder-order phase transition thermodynamics and atom-interchange kinetics. Herein, through introducing more vacancies in the CZTSSe surface, we explored a vacancy-assisted strategy to reduce the atom-interchange barrier limit to facilitate the Cu-Zn ordering kinetic process. The improvement in the Cu-Zn order degree has significantly reduced the charge loss in the device and helped us realize 15.4% (certified at 14.9%) and 13.5% efficiency (certified at 13.3%) in 0.27 cm2 and 1.1 cm2-area CZTSSe solar cells, respectively, thus bringing substantial advancement for emerging inorganic thin-film photovoltaics. △ Less

Submitted 8 April, 2024; originally announced April 2024.

Gradient bandgap enables >13% efficiency sulfide Kesterite solar cells with open-circuit voltage over 800 mV

Authors: Kang Yin, Jinlin Wang, Licheng Lou, Xiao Xu, Bowen Zhang, Menghan Jiao, Jiangjian Shi, Dongmei Li, Huijue Wu, Yanhong Luo, Qingbo Meng

Abstract: Sulfide Kesterite Cu2ZnSnS4 (CZTS), a nontoxic and low-cost photovoltaic material, has always being facing severe charge recombination and poor carrier transport, resulting in the cell efficiency record stagnating around 11% for years. Gradient bandgap is a promising approach to relieve these issues, however, has not been effectively realized in Kesterite solar cells due to the challenges in contr… ▽ More Sulfide Kesterite Cu2ZnSnS4 (CZTS), a nontoxic and low-cost photovoltaic material, has always being facing severe charge recombination and poor carrier transport, resulting in the cell efficiency record stagnating around 11% for years. Gradient bandgap is a promising approach to relieve these issues, however, has not been effectively realized in Kesterite solar cells due to the challenges in controlling the gradient distribution of alloying elements at high temperatures. Herein, targeting at the Cd alloyed CZTS, we propose a pre-crystallization strategy to reduce the intense vertical mass transport and Cd rapid diffusion in the film growth process, thereby realizing front Cd-gradient CZTS absorber. The Cd-gradient CZTS absorber, exhibiting downward bending conduction band structure, has significantly enhanced the minority carrier transport and additionally improved band alignment and interface property of CZTS/CdS heterojunction. Ultimately, we have achieved a champion total-area efficiency of 13.5% (active-area efficiency: 14.1%) in the cell and in particular a high open-circuit voltage of >800 mV. We have also achieved a certified total-area cell efficiency of 13.16%, realizing a substantial step forward for the pure sulfide Kesterite solar cell. △ Less

Submitted 30 March, 2024; originally announced April 2024.

Offline tagging of radon-induced backgrounds in XENON1T and applicability to other liquid xenon detectors

Authors: E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, D. Antón Martin, F. Arneodo, L. Baudis, A. L. Baxter, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, E. J. Brookes, A. Brown, G. Bruno, R. Budnik, T. K. Bui, J. M. R. Cardoso, A. P. Cimental Chavez, A. P. Colijn, J. Conrad , et al. (142 additional authors not shown)

Abstract: This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity… ▽ More This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity field, $^{214}\text{Pb}$ background events can be tagged when they are followed by $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays, or preceded by $^{218}\text{Po}$ decays. This was achieved by evolving a point cloud in the direction of a measured convection velocity field, and searching for $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays or $^{218}\text{Po}$ decays within a volume defined by the point cloud. In XENON1T, this tagging system achieved a $^{214}\text{Pb}$ background reduction of $6.2^{+0.4}_{-0.9}\%$ with an exposure loss of $1.8\pm 0.2 \%$, despite the timescales of convection being smaller than the relevant decay times. We show that the performance can be improved in XENONnT, and that the performance of such a software-tagging approach can be expected to be further improved in a diffusion-limited scenario. Finally, a similar method might be useful to tag the cosmogenic $^{137}\text{Xe}$ background, which is relevant to the search for neutrinoless double-beta decay. △ Less

Submitted 19 June, 2024; v1 submitted 21 March, 2024; originally announced March 2024.

Comments: 17 pages, 19 figures

Density and Affinity Dependent Social Segregation and Arbitrage Equilibrium in a Multi-class Schelling Game

Authors: Venkat Venkatasubramanian, Jessica Shi, Leo Goldman, Arun Sankar E. M., Abhishek Sivaram

Abstract: Contrary to the widely believed hypothesis that larger, denser cities promote socioeconomic mixing, a recent study (Nilforoshan et al. 2023) reports the opposite behavior, i.e. more segregation. Here, we present a game-theoretic model that predicts such a density-dependent segregation outcome in both one- and two-class systems. The model provides key insights into the analytical conditions that le… ▽ More Contrary to the widely believed hypothesis that larger, denser cities promote socioeconomic mixing, a recent study (Nilforoshan et al. 2023) reports the opposite behavior, i.e. more segregation. Here, we present a game-theoretic model that predicts such a density-dependent segregation outcome in both one- and two-class systems. The model provides key insights into the analytical conditions that lead to such behavior. Furthermore, the arbitrage equilibrium outcome implies the equality of effective utilities among all agents. This could be interpreted as all agents being equally "happy" in their respective environments in our ideal society. We believe that our model contributes towards a deeper mathematical understanding of social dynamics and behavior, which is important as we strive to develop more harmonious societies. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Comments: arXiv admin note: text overlap with arXiv:2312.05765

Turing pattern theory on homogeneous and heterogeneous higher-order temporal network system

Authors: Junyuan Shi

Abstract: Reaction-diffusion processes on networked systems have received mounting attention in the past two decades, and the corresponding network dynamics theories have been continuously enriched with the advancement of network science. Recently, time-varying feature and many-body interactions have been discovered on various and numerous networks in real world like biological and social systems, and the s… ▽ More Reaction-diffusion processes on networked systems have received mounting attention in the past two decades, and the corresponding network dynamics theories have been continuously enriched with the advancement of network science. Recently, time-varying feature and many-body interactions have been discovered on various and numerous networks in real world like biological and social systems, and the study of contemporary network science has gradually moved away from the historically static network frameworks that are based on pairwise interactions. We are aimed to propose a general and rudimentary framework for Turing instability of reaction-diffusion processes on higher-order temporal networks. Firstly, we define a brand Laplacian to depict higher-order temporal diffusion behaviors on networks. Furthermore, the general form of higher-order temporal reaction-diffusion systems with frequency of oscillation is defined, and a time-independent and concise form is obtained by equivalent substitution and method of averaging. Next, we discuss the two cases of homogeneous and heterogeneous network systems and give the equivalent conditions of Turing instability through linear stability analysis. Finally, in the numerical simulation part, we verify and discuss the validity of the above theoretical framework and study the effect of the frequency of oscillation of higher-order temporal network on reaction-diffusion processes. Our study has revealed that higher-order temporal reaction-diffusion, which takes into account both time-varying feature and many-body interactions, can formulate innovative and diversified patterns. Moreover, these are significantly differences from patterns in continuous space and patterns on traditional networks. △ Less

Submitted 24 February, 2024; originally announced February 2024.

Comments: 6 figures

E(n)-Equivariant Cartesian Tensor Passing Potential

Authors: Junjie Wang, Yong Wang, Haoting Zhang, Ziyang Yang, Zhixin Liang, Jiuyang Shi, Hui-Tian Wang, Dingyu Xing, Jian Sun

Abstract: Machine learning potential (MLP) has been a popular topic in recent years for its potential to replace expensive first-principles calculations in some large systems. Meanwhile, message passing networks have gained significant attention due to their remarkable accuracy, and a wave of message passing networks based on Cartesian coordinates has emerged. However, the information of the node in these m… ▽ More Machine learning potential (MLP) has been a popular topic in recent years for its potential to replace expensive first-principles calculations in some large systems. Meanwhile, message passing networks have gained significant attention due to their remarkable accuracy, and a wave of message passing networks based on Cartesian coordinates has emerged. However, the information of the node in these models is limited to scalars, vectors, and tensors. In this work, we proposed High-order Tensor Passing Potential (HotPP), an E(n) equivariant message passing neural network that extends the node embedding and message to an arbitrary order tensor. By performing some basic equivariant operations, high order tensors can be coupled very simply and thus the model can make direct predictions of high-order tensors such as dipole moments and polarizabilities without any modifications. Compared to high order tensor models based on spherical vectors, this network is simpler and can achieve comparable accuracy with much fewer parameters. The tests in several datasets demonstrate HotPP is a promising new approach that warrants further investigation. △ Less

Submitted 23 February, 2024; originally announced February 2024.

Comments: 27 pages, 5 figures. (Email: jiansun@nju.edu.cn); Keywords: machine-learning force field; neural network; molecular dynamics simulations; ab initio calculations; materials design

ACM Class: J.2

The XENONnT Dark Matter Experiment

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, V. C. Antochi, D. Antón Martin, F. Arneodo, M. Balata, L. Baudis, A. L. Baxter, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, E. J. Brookes, A. Brown, S. Bruenner, G. Bruno, R. Budnik, T. K. Bui , et al. (170 additional authors not shown)

Abstract: The multi-staged XENON program at INFN Laboratori Nazionali del Gran Sasso aims to detect dark matter with two-phase liquid xenon time projection chambers of increasing size and sensitivity. The XENONnT experiment is the latest detector in the program, planned to be an upgrade of its predecessor XENON1T. It features an active target of 5.9 tonnes of cryogenic liquid xenon (8.5 tonnes total mass in… ▽ More The multi-staged XENON program at INFN Laboratori Nazionali del Gran Sasso aims to detect dark matter with two-phase liquid xenon time projection chambers of increasing size and sensitivity. The XENONnT experiment is the latest detector in the program, planned to be an upgrade of its predecessor XENON1T. It features an active target of 5.9 tonnes of cryogenic liquid xenon (8.5 tonnes total mass in cryostat). The experiment is expected to extend the sensitivity to WIMP dark matter by more than an order of magnitude compared to XENON1T, thanks to the larger active mass and the significantly reduced background, improved by novel systems such as a radon removal plant and a neutron veto. This article describes the XENONnT experiment and its sub-systems in detail and reports on the detector performance during the first science run. △ Less

Submitted 15 February, 2024; originally announced February 2024.

Comments: 32 pages, 19 figures

In silico reproduction of the pathophysiology of in-stent restenosis

Authors: Kiran Manjunatha, Anna Ranno, Jianye Shi, Nicole Schaaps, Pakhwan Nilcham, Anne Cornelissen, Felix Vogt, Marek Behr, Stefanie Reese

Abstract: The occurrence of in-stent restenosis following percutaneous coronary intervention highlights the need for the creation of computational tools that can extract pathophysiological insights and optimize interventional procedures on a patient-specific basis. In light of this, a comprehensive framework encompassing multiple physical phenomena is introduced in this work. This framework effectively capt… ▽ More The occurrence of in-stent restenosis following percutaneous coronary intervention highlights the need for the creation of computational tools that can extract pathophysiological insights and optimize interventional procedures on a patient-specific basis. In light of this, a comprehensive framework encompassing multiple physical phenomena is introduced in this work. This framework effectively captures the intricate interplay of chemical, mechanical, and biological factors. In addition, computational approaches for the extraction of hemodynamic indicators that modulate the severity of the restenotic process are devised. Thus, this marks a significant stride towards facilitating computer-assisted clinical methodologies. △ Less

Submitted 7 May, 2024; v1 submitted 8 January, 2024; originally announced January 2024.

Comments: 17 pages, 12 figures Revision in section 2.3: added Table 1, correted signs in Table 2, added 2 references and some details. Revision in section 3.3: restructured order of figures

All-antiferromagnetic electrically controlled memory on silicon featuring large tunneling magnetoresistance

Authors: Jiacheng Shi, Victor Lopez-Dominguez, Sevdenur Arpaci, Vinod K. Sangwan, Farzad Mahfouzi, Jinwoong Kim, Jordan G. Athas, Mohammad Hamdi, Can Aygen, Charudatta Phatak, Mario Carpentieri, Jidong S. Jiang, Matthew A. Grayson, Nicholas Kioussis, Giovanni Finocchio, Mark C. Hersam, Pedram Khalili Amiri

Abstract: Antiferromagnetic (AFM) materials are a pathway to spintronic memory and computing devices with unprecedented speed, energy efficiency, and bit density. Realizing this potential requires AFM devices with simultaneous electrical writing and reading of information, which are also compatible with established silicon-based manufacturing. Recent experiments have shown tunneling magnetoresistance (TMR)… ▽ More Antiferromagnetic (AFM) materials are a pathway to spintronic memory and computing devices with unprecedented speed, energy efficiency, and bit density. Realizing this potential requires AFM devices with simultaneous electrical writing and reading of information, which are also compatible with established silicon-based manufacturing. Recent experiments have shown tunneling magnetoresistance (TMR) readout in epitaxial AFM tunnel junctions. However, these TMR structures were not grown using a silicon-compatible deposition process, and controlling their AFM order required external magnetic fields. Here we show three-terminal AFM tunnel junctions based on the noncollinear antiferromagnet PtMn3, sputter-deposited on silicon. The devices simultaneously exhibit electrical switching using electric currents, and electrical readout by a large room-temperature TMR effect. First-principles calculations explain the TMR in terms of the momentum-resolved spin-dependent tunneling conduction in tunnel junctions with noncollinear AFM electrodes. △ Less

Submitted 23 November, 2023; originally announced November 2023.

Roadmap on Perovskite Light-Emitting Diodes

Authors: Ziming Chen, Robert L. Z. Hoye, Hin-Lap Yip, Nadesh Fiuza-Maneiro, Iago López-Fernández, Clara Otero-Martínez, Lakshminarayana Polavarapu, Navendu Mondal, Alessandro Mirabelli, Miguel Anaya, Samuel D. Stranks, Hui Liu, Guangyi Shi, Zhengguo Xiao, Nakyung Kim, Yunna Kim, Byungha Shin, Jinquan Shi, Mengxia Liu, Qianpeng Zhang, Zhiyong Fan, James C. Loy, Lianfeng Zhao, Barry P. Rand, Habibul Arfin , et al. (18 additional authors not shown)

Abstract: In recent years, the field of metal-halide perovskite emitters has rapidly emerged as a new community in solid-state lighting. Their exceptional optoelectronic properties have contributed to the rapid rise in external quantum efficiencies (EQEs) in perovskite light-emitting diodes (PeLEDs) from <1% (in 2014) to approaching 30% (in 2023) across a wide range of wavelengths. However, several challeng… ▽ More In recent years, the field of metal-halide perovskite emitters has rapidly emerged as a new community in solid-state lighting. Their exceptional optoelectronic properties have contributed to the rapid rise in external quantum efficiencies (EQEs) in perovskite light-emitting diodes (PeLEDs) from <1% (in 2014) to approaching 30% (in 2023) across a wide range of wavelengths. However, several challenges still hinder their commercialization, including the relatively low EQEs of blue/white devices, limited EQEs in large-area devices, poor device stability, as well as the toxicity of the easily accessible lead components and the solvents used in the synthesis and processing of PeLEDs. This roadmap addresses the current and future challenges in PeLEDs across fundamental and applied research areas, by sharing the community's perspectives. This work will provide the field with practical guidelines to advance PeLED development and facilitate more rapid commercialization. △ Less

Submitted 19 November, 2023; originally announced November 2023.

Comments: 103 pages, 29 figures. This is the version of the article before peer review or editing, as submitted by an author to Journal of Physics: Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it

Single-shot Phase Retrieval from a Fractional Fourier Transform Perspective

Authors: Yixiao Yang, Ran Tao, Kaixuan Wei, Jun Shi

Abstract: The realm of classical phase retrieval concerns itself with the arduous task of recovering a signal from its Fourier magnitude measurements, which are fraught with inherent ambiguities. A single-exposure intensity measurement is commonly deemed insufficient for the reconstruction of the primal signal, given that the absent phase component is imperative for the inverse transformation. In this work,… ▽ More The realm of classical phase retrieval concerns itself with the arduous task of recovering a signal from its Fourier magnitude measurements, which are fraught with inherent ambiguities. A single-exposure intensity measurement is commonly deemed insufficient for the reconstruction of the primal signal, given that the absent phase component is imperative for the inverse transformation. In this work, we present a novel single-shot phase retrieval paradigm from a fractional Fourier transform (FrFT) perspective, which involves integrating the FrFT-based physical measurement model within a self-supervised reconstruction scheme. Specifically, the proposed FrFT-based measurement model addresses the aliasing artifacts problem in the numerical calculation of Fresnel diffraction, featuring adaptability to both short-distance and long-distance propagation scenarios. Moreover, the intensity measurement in the FrFT domain proves highly effective in alleviating the ambiguities of phase retrieval and relaxing the previous conditions on oversampled or multiple measurements in the Fourier domain. Furthermore, the proposed self-supervised reconstruction approach harnesses the fast discrete algorithm of FrFT alongside untrained neural network priors, thereby attaining preeminent results. Through numerical simulations, we demonstrate that both amplitude and phase objects can be effectively retrieved from a single-shot intensity measurement using the proposed approach and provide a promising technique for support-free coherent diffraction imaging. △ Less

Submitted 17 November, 2023; originally announced November 2023.

Realization of a programmable multi-purpose photonic quantum memory with over-thousand qubit manipulations

Authors: Sheng Zhang, Jixuan Shi, Zhaibin Cui, Ye Wang, Yukai Wu, Luming Duan, Yunfei Pu

Abstract: Quantum networks can enable various applications such as distributed quantum computing, long-distance quantum communication, and network-based quantum sensing with unprecedented performances. One of the most important building blocks for a quantum network is a photonic quantum memory which serves as the interface between the communication channel and the local functional unit. A programmable quant… ▽ More Quantum networks can enable various applications such as distributed quantum computing, long-distance quantum communication, and network-based quantum sensing with unprecedented performances. One of the most important building blocks for a quantum network is a photonic quantum memory which serves as the interface between the communication channel and the local functional unit. A programmable quantum memory which can process a large stream of flying qubits and fulfill the requirements of multiple core functions in a quantum network is still to-be-realized. Here we report a high-performance quantum memory which can simultaneously store 72 optical qubits carried by 144 spatially separated atomic ensembles and support up to a thousand consecutive write or read operations in a random access way, two orders of magnitude larger than the previous record. Due to the built-in programmability, this quantum memory can be adapted on-demand for several functions. As example applications, we realize quantum queue, stack, and buffer which closely resemble the counterpart devices for classical information processing. We further demonstrate the synchronization and reshuffle of 4 entangled pairs of photonic pulses with probabilistic arrival time and arbitrary release order via the memory, which is an essential requirement for the realization of quantum repeaters and efficient routing in quantum networks. Realization of this multi-purpose programmable quantum memory thus constitutes a key enabling building block for future large-scale fully-functional quantum networks. △ Less

Submitted 29 April, 2024; v1 submitted 16 November, 2023; originally announced November 2023.

Comments: 17 pages, 19 figures

Journal ref: Phys. Rev. X 14, 021018 (2024)

General-purpose machine-learned potential for 16 elemental metals and their alloys

Authors: Keke Song, Rui Zhao, Jiahui Liu, Yanzhou Wang, Eric Lindgren, Yong Wang, Shunda Chen, Ke Xu, Ting Liang, Penghua Ying, Nan Xu, Zhiqiang Zhao, Jiuyang Shi, Junjie Wang, Shuang Lyu, Zezhu Zeng, Shirong Liang, Haikuan Dong, Ligang Sun, Yue Chen, Zhuhua Zhang, Wanlin Guo, Ping Qian, Jian Sun, Paul Erhart , et al. (3 additional authors not shown)

Abstract: Machine-learned potentials (MLPs) have exhibited remarkable accuracy, yet the lack of general-purpose MLPs for a broad spectrum of elements and their alloys limits their applicability. Here, we present a feasible approach for constructing a unified general-purpose MLP for numerous elements, demonstrated through a model (UNEP-v1) for 16 elemental metals and their alloys. To achieve a complete repre… ▽ More Machine-learned potentials (MLPs) have exhibited remarkable accuracy, yet the lack of general-purpose MLPs for a broad spectrum of elements and their alloys limits their applicability. Here, we present a feasible approach for constructing a unified general-purpose MLP for numerous elements, demonstrated through a model (UNEP-v1) for 16 elemental metals and their alloys. To achieve a complete representation of the chemical space, we show, via principal component analysis and diverse test datasets, that employing one-component and two-component systems suffices. Our unified UNEP-v1 model exhibits superior performance across various physical properties compared to a widely used embedded-atom method potential, while maintaining remarkable efficiency. We demonstrate our approach's effectiveness through reproducing experimentally observed chemical order and stable phases, and large-scale simulations of plasticity and primary radiation damage in MoTaVW alloys. This work represents a significant leap towards a unified general-purpose MLP encompassing the periodic table, with profound implications for materials science. △ Less

Submitted 12 June, 2024; v1 submitted 8 November, 2023; originally announced November 2023.

Comments: Main text with 17 pages and 8 figures; supplementary with 26 figures and 4 tables; source code and training/test data available

Defect Regulation by Palladium Incorporation towards Grain Boundaries of Kesterite solar cells

Authors: Jinlin Wang, Jiangjian Shi, Kang Yin, Fanqi Meng, Shanshan Wang, Licheng Lou, Jiazheng Zhou, Xiao Xu, Huijue Wu, Yanhong Luo, Dongmei Li, Shiyou Chen, Qingbo Meng

Abstract: Kesterite Cu2ZnSn(S, Se)4 (CZTSSe) solar cell has emerged as one of the most promising candidates for thin-film photovoltaics. However, severe charge losses occurring at the grain boundaries (GBs) of Kesterite polycrystalline absorbers has hindered the improvement of cell performance. Herein, we report a redox reaction strategy involving palladium (Pd) to eliminate atomic vacancy defects such as V… ▽ More Kesterite Cu2ZnSn(S, Se)4 (CZTSSe) solar cell has emerged as one of the most promising candidates for thin-film photovoltaics. However, severe charge losses occurring at the grain boundaries (GBs) of Kesterite polycrystalline absorbers has hindered the improvement of cell performance. Herein, we report a redox reaction strategy involving palladium (Pd) to eliminate atomic vacancy defects such as VSn and VSe in GBs of the Kesterite absorbers. We demonstrate that PdSex compounds could form during the selenization process and distribute at the GBs and the absorber surfaces; thereby aid in the suppression of Sn and Se volatilization loss and inhibiting the formation of VSn and VSe defects. Furthermore, Pd(II)/Pd(IV) serves as a redox shuttle, i.e., on one hand, Pd(II) captures Se vapor from the reaction environment to produce PdSe2, on the other hand, PdSe2 provides Se atoms to the Kesterite absorber by being reduced to PdSe, thus contributing to the elimination of pre-existing VSe defects within GBs. These effects collectively reduce defects and enhance the p-type characteristics of the Kesterite absorber, leading to a significant reduction in charge recombination loss within the cell. As a result, high-performance Kesterite solar cells with a total-area efficiency of 14.5% have been achieved. This remarkable efficiency increase benefited from the redox reaction strategy offers a promising avenue for the precise regulation of defects in Kesterite solar cells and holds generally significant implications for the exploration of various other photovoltaic devices. △ Less

Submitted 7 November, 2023; originally announced November 2023.

Journal ref: Nature Communications 2024, 15, 4344

Millimeter-scale exfoliation of hBN with tunable flake thickness

Authors: Amy S. McKeown-Green, Helen J. Zeng, Ashley P. Saunders, Jiayi Li, Jenny Hu, Jiaojian Shi, Yuejun Shen, Feng Pan, Jennifer A. Dionne, Tony F. Heinz, Stephen Wu, Fan Zheng, Fang Liu

Abstract: As a two-dimensional (2D) dielectric material, hexagonal boron nitride (hBN) is in high demand for applications in photonics, nonlinear optics, and nanoelectronics. Unfortunately, the high-throughput preparation of macroscopic-scale, high-quality hBN flakes with controlled thickness is an ongoing challenge, limiting device fabrication and technological integration. Here, we present a metal thin-fi… ▽ More As a two-dimensional (2D) dielectric material, hexagonal boron nitride (hBN) is in high demand for applications in photonics, nonlinear optics, and nanoelectronics. Unfortunately, the high-throughput preparation of macroscopic-scale, high-quality hBN flakes with controlled thickness is an ongoing challenge, limiting device fabrication and technological integration. Here, we present a metal thin-film exfoliation method to prepare hBN flakes with millimeter-scale dimension, near-unity yields, and tunable flake thickness distribution from 1-7 layers, a substantial improvement over scotch tape exfoliation. The single crystallinity and high quality of the exfoliated hBN are demonstrated with optical microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation. We further explore a possible mechanism for the effectiveness and selectivity based on thin-film residual stress measurements, density functional theory calculations, and transmission electron microscopy imaging of the deposited metal films. We find that the magnitude of the residual tensile stress induced by thin film deposition plays a key role in determining exfoliated flake thickness in a manner which closely resembles 3D semiconductor spalling. Lastly, we demonstrate that our exfoliated, large-area hBN flakes can be readily incorporated as encapsulating layers for other 2D monolayers. Altogether, this method brings us one step closer to the high throughput, mass production of hBN-based 2D photonic, optoelectronic, and quantum devices. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Comments: 21 pages, 5 figures, work completed at Stanford University

Is A 15-minute City within Reach in the United States? An Investigation of Activity-Based Mobility Flows in the 12 Most Populous US Cities

Authors: Tanhua Jin, Kailai Wang, Yanan Xin, Jian Shi, Ye Hong, Frank Witlox

Abstract: Enhanced efforts in the transportation sector should be implemented to mitigate the adverse effects of CO2 emissions resulting from zoning-based planning paradigms. The innovative concept of the 15-minute city, with a focus on proximity-based planning, holds promise in minimizing unnecessary travel and advancing the progress toward achieving carbon neutrality. However, an important research questi… ▽ More Enhanced efforts in the transportation sector should be implemented to mitigate the adverse effects of CO2 emissions resulting from zoning-based planning paradigms. The innovative concept of the 15-minute city, with a focus on proximity-based planning, holds promise in minimizing unnecessary travel and advancing the progress toward achieving carbon neutrality. However, an important research question that remains insufficiently explored is: to what extent is a 15-minute city concept within reach for US cities? This paper establishes a comprehensive framework to evaluate the 15-minute city concept using SafeGraph Point of Interest (POI) check-in data in the 12 most populous US cities. The results reveal that residents are more likely to rely on cars due to the fact that most of their essential activities are located beyond convenient walking, cycling, and public transit distances. However, there is significant potential for the implementation of the 15-minute city concept, as most residents' current activities can be accommodated within a 15-minute radius by the aforementioned low-emission modes of transportation. Our findings can offer policymakers insight into how far US cities are away from the 15-minute city and the potential CO2 emission reduction they can expect if the concept is successfully implemented. △ Less

Submitted 22 October, 2023; originally announced October 2023.

Twisted DNA origami-based chiral monolayers for spin filtering

Authors: Haozhi Wang, Fangfei Yin, Linyun Li, Mingqiang Li, Zheng Fang, Chenyun Sun, Bochen Li, Jiye Shi, Jiang Li, Lihua Wang, Shiping Song, Xiaolei Zuo, Xiaoguo Liu, Chunhai Fan

Abstract: DNA monolayers with inherent chirality play a pivotal role across various domains, including biosensors, DNA chips, and bioelectronics. Nonetheless, conventional DNA chiral monolayers, typically constructed from single-stranded DNA (ssDNA) or double-stranded DNA (dsDNA), often lack structural orderliness and design flexibility at the interface. Structural DNA nanotechnology emerges as a promising… ▽ More DNA monolayers with inherent chirality play a pivotal role across various domains, including biosensors, DNA chips, and bioelectronics. Nonetheless, conventional DNA chiral monolayers, typically constructed from single-stranded DNA (ssDNA) or double-stranded DNA (dsDNA), often lack structural orderliness and design flexibility at the interface. Structural DNA nanotechnology emerges as a promising solution to tackle these challenges. In this study, we present a strategy for crafting highly adaptable twisted DNA origami-based chiral monolayers. These structures exhibit distinct interfacial assembly characteristics and effectively mitigate the structural disorder of dsDNA monolayers, which is constrained by a limited persistence length of ~50 nm of dsDNA. We highlight the spin-filtering capabilities of four representative DNA origami-based chiral monolayers, demonstrating a maximal one-order-of-magnitude increase in spin-filtering efficiency per unit area compared to conventional dsDNA chiral monolayers. Intriguingly, our findings reveal that the higher-order, tertiary, chiral structure of twisted DNA origami further enhances the spin-filtering efficiency. This work paves the way for the rational design of DNA chiral monolayers. △ Less

Submitted 13 October, 2023; originally announced October 2023.

Search for heavy neutral leptons in electron-positron and neutral-pion final states with the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, M. B. Brunetti, L. Camilleri , et al. (163 additional authors not shown)

Abstract: We present the first search for heavy neutral leptons (HNL) decaying into $νにゅーe^+e^-$ or $νにゅーπぱい^0$ final states in a liquid-argon time projection chamber using data collected with the MicroBooNE detector. The data were recorded synchronously with the NuMI neutrino beam from Fermilab's Main Injector corresponding to a total exposure of $7.01 \times 10^{20}$ protons on target. We set upper limits at the… ▽ More We present the first search for heavy neutral leptons (HNL) decaying into $νにゅーe^+e^-$ or $νにゅーπぱい^0$ final states in a liquid-argon time projection chamber using data collected with the MicroBooNE detector. The data were recorded synchronously with the NuMI neutrino beam from Fermilab's Main Injector corresponding to a total exposure of $7.01 \times 10^{20}$ protons on target. We set upper limits at the $90\%$ confidence level on the mixing parameter $\lvert U_{μみゅー4}\rvert^2$ in the mass ranges $10\le m_{\rm HNL}\le 150$ MeV for the $νにゅーe^+e^-$ channel and $150\le m_{\rm HNL}\le 245$ MeV for the $νにゅーπぱい^0$ channel, assuming $\lvert U_{e 4}\rvert^2 = \lvert U_{τたう4}\rvert^2 = 0$. These limits represent the most stringent constraints in the mass range $35<m_{\rm HNL}<175$ MeV and the first constraints from a direct search for $νにゅーπぱい^0$ decays. △ Less

Submitted 12 January, 2024; v1 submitted 11 October, 2023; originally announced October 2023.

Comments: Version as accepted by Physical Review Letters, some presentational changes and updated references, no changes to results

Report number: FERMILAB-PUB-23-574-ND

Design and performance of the field cage for the XENONnT experiment

Authors: E. Aprile, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, V. C. Antochi, D. Antón Martin, F. Arneodo, L. Baudis, A. L. Baxter, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, E. J. Brookes, A. Brown, S. Bruenner, G. Bruno, R. Budnik, T. K. Bui, C. Cai, J. M. R. Cardoso, D. Cichon , et al. (139 additional authors not shown)

Abstract: The precision in reconstructing events detected in a dual-phase time projection chamber depends on an homogeneous and well understood electric field within the liquid target. In the XENONnT TPC the field homogeneity is achieved through a double-array field cage, consisting of two nested arrays of field shaping rings connected by an easily accessible resistor chain. Rather than being connected to t… ▽ More The precision in reconstructing events detected in a dual-phase time projection chamber depends on an homogeneous and well understood electric field within the liquid target. In the XENONnT TPC the field homogeneity is achieved through a double-array field cage, consisting of two nested arrays of field shaping rings connected by an easily accessible resistor chain. Rather than being connected to the gate electrode, the topmost field shaping ring is independently biased, adding a degree of freedom to tune the electric field during operation. Two-dimensional finite element simulations were used to optimize the field cage, as well as its operation. Simulation results were compared to ${}^{83m}\mathrm{Kr}$ calibration data. This comparison indicates an accumulation of charge on the panels of the TPC which is constant over time, as no evolution of the reconstructed position distribution of events is observed. The simulated electric field was then used to correct the charge signal for the field dependence of the charge yield. This correction resolves the inconsistent measurement of the drift electron lifetime when using different calibrations sources and different field cage tuning voltages. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Journal ref: Eur. Phys. J. C 84, 138 (2024)

Measurement of triple-differential inclusive muon-neutrino charged-current cross section on argon with the MicroBooNE detector

Authors: MicroBooNE Collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao , et al. (165 additional authors not shown)

Abstract: We report the first measurement of the differential cross section $d^{2}σしぐま(E_νにゅー)/ d\cos(θしーた_μみゅー) dP_μみゅー$ for inclusive muon-neutrino charged-current scattering on argon. This measurement utilizes data from 6.4$\times10^{20}$ protons on target of exposure collected using the MicroBooNE liquid argon time projection chamber located along the Fermilab Booster Neutrino Beam with a mean neutrino energy of appro… ▽ More We report the first measurement of the differential cross section $d^{2}σしぐま(E_νにゅー)/ d\cos(θしーた_μみゅー) dP_μみゅー$ for inclusive muon-neutrino charged-current scattering on argon. This measurement utilizes data from 6.4$\times10^{20}$ protons on target of exposure collected using the MicroBooNE liquid argon time projection chamber located along the Fermilab Booster Neutrino Beam with a mean neutrino energy of approximately 0.8~GeV. The mapping from reconstructed kinematics to truth quantities, particularly from reconstructed to true neutrino energy, is validated by comparing the distribution of reconstructed hadronic energy in data to that of the model prediction in different muon scattering angle bins after conditional constraint from the muon momentum distribution in data. The success of this validation gives confidence that the missing energy in the MicroBooNE detector is well-modeled in simulation, enabling the unfolding to a triple-differential measurement over muon momentum, muon scattering angle, and neutrino energy. The unfolded measurement covers an extensive phase space, providing a wealth of information useful for future liquid argon time projection chamber experiments measuring neutrino oscillations. Comparisons against a number of commonly used model predictions are included and their performance in different parts of the available phase-space is discussed. △ Less

Submitted 10 December, 2023; v1 submitted 12 July, 2023; originally announced July 2023.

Report number: FERMILAB-PUB-23-368-ND

Pixelation with concentration-encoded effective photons for molecular optical sectioning microscopy

Authors: Geng Wang, Rishyashring R. Iyer, Janet E. Sorrells, Edita Aksamitiene, Eric J. Chaney, Carlos A. Renteria, Jaena Park, Jindou Shi, Yi Sun, Stephen A. Boppart, Haohua Tu

Abstract: Quality control in molecular optical sectioning microscopy is indispensable for transforming acquired digital images from qualitative descriptions to quantitative data. Although numerous tools, metrics, and phantoms have been developed, accurate quantitative comparisons of data from different microscopy systems with diverse acquisition conditions remains a challenge. Here, we develop a simple tool… ▽ More Quality control in molecular optical sectioning microscopy is indispensable for transforming acquired digital images from qualitative descriptions to quantitative data. Although numerous tools, metrics, and phantoms have been developed, accurate quantitative comparisons of data from different microscopy systems with diverse acquisition conditions remains a challenge. Here, we develop a simple tool based on an absolute measurement of bulk fluorophore solutions with related Poisson photon statistics, to overcome this obstacle. Demonstrated in a prototypical multiphoton microscope, our tool unifies the unit of pixelated measurement to enable objective comparison of imaging performance across different modalities, microscopes, components/settings, and molecular targets. The application of this tool in live specimens identifies an attractive methodology for quantitative imaging, which rapidly acquires low signal-to-noise frames with either gentle illumination or low-concentration fluorescence labeling. △ Less

Submitted 10 July, 2023; originally announced July 2023.

Measurement of ambient radon progeny decay rates and energy spectra in liquid argon using the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao , et al. (166 additional authors not shown)

Abstract: We report measurements of radon progeny in liquid argon within the MicroBooNE time projection chamber (LArTPC). The presence of specific radon daughters in MicroBooNE's 85 metric tons of active liquid argon bulk is probed with newly developed charge-based low-energy reconstruction tools and analysis techniques to detect correlated $^{214}$Bi-$^{214}$Po radioactive decays. Special datasets taken du… ▽ More We report measurements of radon progeny in liquid argon within the MicroBooNE time projection chamber (LArTPC). The presence of specific radon daughters in MicroBooNE's 85 metric tons of active liquid argon bulk is probed with newly developed charge-based low-energy reconstruction tools and analysis techniques to detect correlated $^{214}$Bi-$^{214}$Po radioactive decays. Special datasets taken during periods of active radon doping enable new demonstrations of the calorimetric capabilities of single-phase neutrino LArTPCs for $βべーた$ and $αあるふぁ$ particles with electron-equivalent energies ranging from 0.1 to 3.0 MeV. By applying $^{214}$Bi-$^{214}$Po detection algorithms to data recorded over a 46-day period, no statistically significant presence of radioactive $^{214}$Bi is detected, and a limit on the activity is placed at $<0.35$ mBq/kg at the 95% confidence level. This bulk $^{214}$Bi radiopurity limit -- the first ever reported for a liquid argon detector incorporating liquid-phase purification -- is then further discussed in relation to the targeted upper limit of 1 mBq/kg on bulk $^{222}$Rn activity for the DUNE neutrino detector. △ Less

Submitted 22 March, 2024; v1 submitted 6 July, 2023; originally announced July 2023.

Report number: FERMILAB-PUB-23-352-ND

Journal ref: Phys. Rev. D 109, 052007 (2024)

Deep Learning Models for Flood Predictions in South Florida

Authors: Jimeng Shi, Zeda Yin, Rukmangadh Myana, Khandker Ishtiaq, Anupama John, Jayantha Obeysekera, Arturo Leon, Giri Narasimhan

Abstract: Simulating and predicting water levels in river systems is essential for flood warnings, hydraulic operations, and flood mitigations. In the engineering field, tools such as HEC-RAS, MIKE, and SWMM are used to build detailed physics-based hydrological and hydraulic computational models to simulate the entire watershed, thereby predicting the water stage at any point in the system. However, these p… ▽ More Simulating and predicting water levels in river systems is essential for flood warnings, hydraulic operations, and flood mitigations. In the engineering field, tools such as HEC-RAS, MIKE, and SWMM are used to build detailed physics-based hydrological and hydraulic computational models to simulate the entire watershed, thereby predicting the water stage at any point in the system. However, these physics-based models are computationally intensive, especially for large watersheds and for longer simulations. To overcome this problem, we train several deep learning (DL) models for use as surrogate models to rapidly predict the water stage. The downstream stage of the Miami River in South Florida is chosen as a case study for this paper. The dataset is from January 1, 2010, to December 31, 2020, downloaded from the DBHYDRO database of the South Florida Water Management District (SFWMD). Extensive experiments show that the performance of the DL models is comparable to that of the physics-based models, even during extreme precipitation conditions (i.e., tropical storms). Furthermore, we study the decline in prediction accuracy of the DL models with an increase in prediction lengths. In order to predict the water stage in the future, our DL models use measured variables of the river system from the recent past as well as covariates that can be reliably predicted in the near future. In summary, the deep learning models achieve comparable or better error rates with at least 1000x speedup in comparison to the physics-based models. △ Less

Submitted 11 September, 2023; v1 submitted 28 June, 2023; originally announced June 2023.

Search for events in XENON1T associated with Gravitational Waves

Authors: XENON Collaboration, E. Aprile, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, V. C. Antochi, D. Antoń Martin, F. Arneodo, L. Baudis, A. L. Baxter, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, E. J. Brookes, A. Brown, S. Bruenner, G. Bruno, R. Budnik, T. K. Bui, C. Cai, J. M. R. Cardoso , et al. (138 additional authors not shown)

Abstract: We perform a blind search for particle signals in the XENON1T dark matter detector that occur close in time to gravitational wave signals in the LIGO and Virgo observatories. No particle signal is observed in the nuclear recoil, electronic recoil, CE$νにゅー$NS, and S2-only channels within $\pm$ 500 seconds of observations of the gravitational wave signals GW170104, GW170729, GW170817, GW170818, and GW1… ▽ More We perform a blind search for particle signals in the XENON1T dark matter detector that occur close in time to gravitational wave signals in the LIGO and Virgo observatories. No particle signal is observed in the nuclear recoil, electronic recoil, CE$νにゅー$NS, and S2-only channels within $\pm$ 500 seconds of observations of the gravitational wave signals GW170104, GW170729, GW170817, GW170818, and GW170823. We use this null result to constrain mono-energetic neutrinos and Beyond Standard Model particles emitted in the closest coalescence GW170817, a binary neutron star merger. We set new upper limits on the fluence (time-integrated flux) of coincident neutrinos down to 17 keV at 90% confidence level. Furthermore, we constrain the product of coincident fluence and cross section of Beyond Standard Model particles to be less than $10^{-29}$ cm$^2$/cm$^2$ in the [5.5-210] keV energy range at 90% confidence level. △ Less

Submitted 27 October, 2023; v1 submitted 20 June, 2023; originally announced June 2023.

Longitudinal Compression of Macro Relativistic Electron Beam

Authors: An Li, Jiaru Shi, Hao Zha, Qiang Gao, Liuyuan Zhou, Huaibi Chen

Abstract: We presented a novel concept of longitudinal bunch train compression capable of manipulating relativistic electron beam in range of hundreds of meters. This concept has the potential to compress the electron beam generated by conditional linear accelerator with a high ratio and raise its power to an high level comparable with large induction accelerators. The method utilizes the spiral motion of e… ▽ More We presented a novel concept of longitudinal bunch train compression capable of manipulating relativistic electron beam in range of hundreds of meters. This concept has the potential to compress the electron beam generated by conditional linear accelerator with a high ratio and raise its power to an high level comparable with large induction accelerators. The method utilizes the spiral motion of electrons in a uniform magnetic field to fold hundreds-of-meters-long trajectories into a compact set-up. The interval between bunches can be adjusted by modulating their sprial movement. The method is explored with particle dynamic simulation. Compared to set-up of similar size, such as chicane, this method can compress bunches at distinct larger scales, opening up new possibilities generating beam of high power with compact devices and at lower costs. △ Less

Submitted 14 June, 2023; originally announced June 2023.

Comments: 8 pages, 14 figures

14 Examples of How LLMs Can Transform Materials Science and Chemistry: A Reflection on a Large Language Model Hackathon

Authors: Kevin Maik Jablonka, Qianxiang Ai, Alexander Al-Feghali, Shruti Badhwar, Joshua D. Bocarsly, Andres M Bran, Stefan Bringuier, L. Catherine Brinson, Kamal Choudhary, Defne Circi, Sam Cox, Wibe A. de Jong, Matthew L. Evans, Nicolas Gastellu, Jerome Genzling, María Victoria Gil, Ankur K. Gupta, Zhi Hong, Alishba Imran, Sabine Kruschwitz, Anne Labarre, Jakub Lála, Tao Liu, Steven Ma, Sauradeep Majumdar , et al. (28 additional authors not shown)

Abstract: Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon. This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of mole… ▽ More Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon. This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of molecules and materials, designing novel interfaces for tools, extracting knowledge from unstructured data, and developing new educational applications. The diverse topics and the fact that working prototypes could be generated in less than two days highlight that LLMs will profoundly impact the future of our fields. The rich collection of ideas and projects also indicates that the applications of LLMs are not limited to materials science and chemistry but offer potential benefits to a wide range of scientific disciplines. △ Less

Submitted 14 July, 2023; v1 submitted 9 June, 2023; originally announced June 2023.

First measurement of $ηいーた$ production in neutrino interactions on argon with MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao , et al. (164 additional authors not shown)

Abstract: We present a measurement of $ηいーた$ production from neutrino interactions on argon with the MicroBooNE detector. The modeling of resonant neutrino interactions on argon is a critical aspect of the neutrino oscillation physics program being carried out by the DUNE and Short Baseline Neutrino programs. $ηいーた$ production in neutrino interactions provides a powerful new probe of resonant interactions, comple… ▽ More We present a measurement of $ηいーた$ production from neutrino interactions on argon with the MicroBooNE detector. The modeling of resonant neutrino interactions on argon is a critical aspect of the neutrino oscillation physics program being carried out by the DUNE and Short Baseline Neutrino programs. $ηいーた$ production in neutrino interactions provides a powerful new probe of resonant interactions, complementary to pion channels, and is particularly suited to the study of higher-order resonances beyond the $Δでるた(1232)$. We measure a flux-integrated cross section for neutrino-induced $ηいーた$ production on argon of $3.22 \pm 0.84 \; \textrm{(stat.)} \pm 0.86 \; \textrm{(syst.)}$ $10^{-41}{\textrm{cm}}^{2}$/nucleon. By demonstrating the successful reconstruction of the two photons resulting from $ηいーた$ production, this analysis enables a novel calibration technique for electromagnetic showers in GeV accelerator neutrino experiments. △ Less

Submitted 4 May, 2024; v1 submitted 25 May, 2023; originally announced May 2023.

Report number: FERMILAB-PUB-23-249-ND

Journal ref: Phys. Rev. Lett. 132, 151801 Published 10 April 2024

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

Authors: Z. X. Ling, X. J. Sun, C. Zhang, S. L. Sun, G. Jin, S. N. Zhang, X. F. Zhang, J. B. Chang, F. S. Chen, Y. F. Chen, Z. W. Cheng, W. Fu, Y. X. Han, H. Li, J. F. Li, Y. Li, Z. D. Li, P. R. Liu, Y. H. Lv, X. H. Ma, Y. J. Tang, C. B. Wang, R. J. Xie, Y. L. Xue, A. L. Yan , et al. (101 additional authors not shown)

Abstract: The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo… ▽ More The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: Accepted by RAA

A Computational Approach for Mapping Electrochemical Activity of Multi-Principal Element Alloys

Authors: Jodie A. Yuwono, Xinyu Li, Tyler D. Doležal, Adib J. Samin, Javen Qinfeng Shi, Zhipeng Li, Nick Birbilis

Abstract: Multi principal element alloys (MPEAs) comprise a unique class of metal alloys. MPEAs have been demonstrated to possess several exceptional properties, including, as most relevant to the present study, a high corrosion resistance. In the context of MPEA design, the vast number of potential alloying elements and the staggering number of elemental combinations favours a computational alloy design ap… ▽ More Multi principal element alloys (MPEAs) comprise a unique class of metal alloys. MPEAs have been demonstrated to possess several exceptional properties, including, as most relevant to the present study, a high corrosion resistance. In the context of MPEA design, the vast number of potential alloying elements and the staggering number of elemental combinations favours a computational alloy design approach. In order to computationally assess the prospective corrosion performance of MPEA, an approach was developed in this study. A density functional theory (DFT) based Monte Carlo method was used for the development of MPEA structure, with the AlCrTiV alloy used as a model. High-throughput DFT calculations were performed to create training datasets for surface activity towards different adsorbate species: O2-, Cl- and H+. Machine learning (ML) with combined representation was then utilised to predict the adsorption and vacancy energies as descriptors for surface activity. The capability of the combined computational methods of MC, DFT and ML, as a virtual electrochemical performance simulator for MPEAs was established and may be useful in exploring other MPEAs. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Comments: 9 Figures

Fiber-optic nonlinear wavelength converter for adaptive femtosecond biophotonics

Authors: Geng Wang, Jindou Shi, Rishyashring R. Iyer, Janet E. Sorrells, Haohua Tu

Abstract: Broad and safe access to ultrafast laser technology has been hindered by the absence of optical fiber-delivered pulses with tunable central wavelength, pulse repetition rate, and pulse width in the picosecond-femtosecond regime. To address this long-standing obstacle, we developed a reliable accessory for femtosecond ytterbium fiber chirped pulse amplifiers, termed as fiber-optic nonlinear wavelen… ▽ More Broad and safe access to ultrafast laser technology has been hindered by the absence of optical fiber-delivered pulses with tunable central wavelength, pulse repetition rate, and pulse width in the picosecond-femtosecond regime. To address this long-standing obstacle, we developed a reliable accessory for femtosecond ytterbium fiber chirped pulse amplifiers, termed as fiber-optic nonlinear wavelength converter (FNWC), as an adaptive optical source for the emergent field of femtosecond biophotonics. This accessory embowers the fixed-wavelength laser to produce fiber delivered ~20 nJ pulses with central wavelength across 950-1150 nm, repetition rate across 1-10 MHz, and pulse width across 40-400 fs, with a long-term stability of >2000 hrs. As a prototypical label-free application in biology and medicine, we demonstrate the utility of FNWC in real-time intravital imaging synergistically integrated with modern machine learning and large-scale fluorescence lifetime imaging microscopy. △ Less

Submitted 9 February, 2024; v1 submitted 14 May, 2023; originally announced May 2023.

Comments: 23 pages, 8 figures, 6 tables

Heterojunction interface regulation to realize high-performance flexible Kesterite solar cells

Authors: Xiao Xu, Jiazheng Zhou, Kang Yin, Jinlin Wang, Licheng Lou, Dongmei Li, Jiangjian Shi, Huijue Wu, Yanhong Luo, Qingbo Meng

Abstract: Flexible Cu2ZnSn(S, Se)4 (CZTSSe) solar cells take the advantages of environmental friendliness, low cost, and multi-scenario applications, and have drawn extensive attention in recent years. Compared with rigid devices, the lack of alkali metal elements in the flexible substrate is the main factor limiting the performance of flexible CZTSSe solar cells. This work proposes a Rb ion additive strate… ▽ More Flexible Cu2ZnSn(S, Se)4 (CZTSSe) solar cells take the advantages of environmental friendliness, low cost, and multi-scenario applications, and have drawn extensive attention in recent years. Compared with rigid devices, the lack of alkali metal elements in the flexible substrate is the main factor limiting the performance of flexible CZTSSe solar cells. This work proposes a Rb ion additive strategy to simultaneously regulate the CZTSSe film surface properties and the CdS chemical bath deposition (CBD) processes. Material and chemical characterization reveals that Rb ions can passivate the detrimental Se0 cluster defect and additionally provide a more active surface for the CdS epitaxial growth. Furthermore, Rb can also coordinate with thiourea (TU) in the CBD solution and improve the ion-by-ion deposition of the CdS layer. Finally, the flexible CZTSSe cell fabricated by this strategy has reached a high total-area efficiency of 12.63% (active-area efficiency of 13.2%), with its VOC and FF reaching 538 mV and 0.70, respectively. This work enriches the alkali metal passivation strategies and provides new ideas for further improving flexible CZTSSe solar cells in the future. △ Less

Submitted 10 May, 2023; originally announced May 2023.

Journal ref: Advanced Energy Materials 2023, 13 (38), 2301701

Spatial and Modal Optimal Transport for Fast Cross-Modal MRI Reconstruction

Authors: Qi Wang, Zhijie Wen, Jun Shi, Qian Wang, Dinggang Shen, Shihui Ying

Abstract: Multi-modal magnetic resonance imaging (MRI) plays a crucial role in comprehensive disease diagnosis in clinical medicine. However, acquiring certain modalities, such as T2-weighted images (T2WIs), is time-consuming and prone to be with motion artifacts. It negatively impacts subsequent multi-modal image analysis. To address this issue, we propose an end-to-end deep learning framework that utilize… ▽ More Multi-modal magnetic resonance imaging (MRI) plays a crucial role in comprehensive disease diagnosis in clinical medicine. However, acquiring certain modalities, such as T2-weighted images (T2WIs), is time-consuming and prone to be with motion artifacts. It negatively impacts subsequent multi-modal image analysis. To address this issue, we propose an end-to-end deep learning framework that utilizes T1-weighted images (T1WIs) as auxiliary modalities to expedite T2WIs' acquisitions. While image pre-processing is capable of mitigating misalignment, improper parameter selection leads to adverse pre-processing effects, requiring iterative experimentation and adjustment. To overcome this shortage, we employ Optimal Transport (OT) to synthesize T2WIs by aligning T1WIs and performing cross-modal synthesis, effectively mitigating spatial misalignment effects. Furthermore, we adopt an alternating iteration framework between the reconstruction task and the cross-modal synthesis task to optimize the final results. Then, we prove that the reconstructed T2WIs and the synthetic T2WIs become closer on the T2 image manifold with iterations increasing, and further illustrate that the improved reconstruction result enhances the synthesis process, whereas the enhanced synthesis result improves the reconstruction process. Finally, experimental results from FastMRI and internal datasets confirm the effectiveness of our method, demonstrating significant improvements in image reconstruction quality even at low sampling rates. △ Less

Submitted 21 May, 2024; v1 submitted 4 May, 2023; originally announced May 2023.

Inverse design of artificial skins

Authors: Zhiguang Liu, Minkun Cai, Shenda Hong, Junli Shi, Sai Xie, Chang Liu, Huifeng Du, James D. Morin, Gang Li, Wang Liu, Hong Wang, Ke Tang, Nicholas X. Fang, Chuan Fei Guo

Abstract: Mimicking the perceptual functions of human cutaneous mechanoreceptors, artificial skins or flexible pressure sensors can transduce tactile stimuli to quantitative electrical signals. Conventional methods to design such devices follow a forward structure-to-property routine based on trial-and-error experiments/simulations, which take months or longer to determine one solution valid for one specifi… ▽ More Mimicking the perceptual functions of human cutaneous mechanoreceptors, artificial skins or flexible pressure sensors can transduce tactile stimuli to quantitative electrical signals. Conventional methods to design such devices follow a forward structure-to-property routine based on trial-and-error experiments/simulations, which take months or longer to determine one solution valid for one specific material. Target-oriented inverse design that shows far higher output efficiency has proven effective in other fields, but is still absent for artificial skins because of the difficulties in acquiring big data. Here, we report a property-to-structure inverse design of artificial skins based on small dataset machine learning, exhibiting a comprehensive efficiency at least four orders of magnitude higher than the conventional routine. The inverse routine can predict hundreds of solutions that overcome the intrinsic signal saturation problem for linear response in hours, and the solutions are valid to a variety of materials. Our results demonstrate that the inverse design allowed by small dataset is an efficient and powerful tool to target multifarious applications of artificial skins, which can potentially advance the fields of intelligent robots, advanced healthcare, and human-machine interfaces. △ Less

Submitted 10 April, 2023; originally announced April 2023.

First demonstration of $\mathcal{O}(1\,\text{ns})$ timing resolution in the MicroBooNE liquid argon time projection chamber

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao, D. Caratelli , et al. (163 additional authors not shown)

Abstract: MicroBooNE is a neutrino experiment located in the Booster Neutrino Beamline (BNB) at Fermilab, which collected data from 2015 to 2021. MicroBooNE's liquid argon time projection chamber (LArTPC) is accompanied by a photon detection system consisting of 32 photomultiplier tubes used to measure the argon scintillation light and determine the timing of neutrino interactions. Analysis techniques combi… ▽ More MicroBooNE is a neutrino experiment located in the Booster Neutrino Beamline (BNB) at Fermilab, which collected data from 2015 to 2021. MicroBooNE's liquid argon time projection chamber (LArTPC) is accompanied by a photon detection system consisting of 32 photomultiplier tubes used to measure the argon scintillation light and determine the timing of neutrino interactions. Analysis techniques combining light signals and reconstructed tracks are applied to achieve a neutrino interaction time resolution of $\mathcal{O}(1\,\text{ns})$. The result obtained allows MicroBooNE to access the ns neutrino pulse structure of the BNB for the first time. The timing resolution achieved will enable significant enhancement of cosmic background rejection for all neutrino analyses. Furthermore, the ns timing resolution opens new avenues to search for long-lived-particles such as heavy neutral leptons in MicroBooNE, as well as in future large LArTPC experiments, namely the SBN program and DUNE. △ Less

Submitted 29 August, 2023; v1 submitted 4 April, 2023; originally announced April 2023.

Giant room-temperature nonlinearities from a monolayer Janus topological semiconductor

Authors: Jiaojian Shi, Haowei Xu, Christian Heide, Changan HuangFu, Chenyi Xia, Felipe de Quesada, Hongzhi Shen, Tianyi Zhang, Leo Yu, Amalya Johnson, Fang Liu, Enzheng Shi, Liying Jiao, Tony Heinz, Shambhu Ghimire, Ju Li, Jing Kong, Yunfan Guo, Aaron M. Lindenberg

Abstract: Nonlinear optical materials possess wide applications, ranging from terahertz and mid-infrared detection to energy harvesting. Recently, the correlations between nonlinear optical responses and topological properties, such as Berry curvature and the quantum metric tensor, have stimulated great interest. Here, we report giant room-temperature nonlinearities in an emergent non-centrosymmetric two-di… ▽ More Nonlinear optical materials possess wide applications, ranging from terahertz and mid-infrared detection to energy harvesting. Recently, the correlations between nonlinear optical responses and topological properties, such as Berry curvature and the quantum metric tensor, have stimulated great interest. Here, we report giant room-temperature nonlinearities in an emergent non-centrosymmetric two-dimensional topological material, the Janus transition metal dichalcogenides in the 1T' phase, which are synthesized by an advanced atomic-layer substitution method. High harmonic generation, terahertz emission spectroscopy, and second harmonic generation measurements consistently reveal orders-of-the-magnitude enhancement in terahertz-frequency nonlinearities of 1T' MoSSe (e.g., > 50 times higher than 2H MoS$_2$ for 18th order harmonic generation; > 20 times higher than 2H MoS$_2$ for terahertz emission). It is elucidated that such colossal nonlinear optical responses come from topological band mixing and strong inversion symmetry breaking due to the Janus structure. Our work defines general protocols for designing materials with large nonlinearities and preludes the applications of topological materials in optoelectronics down to the monolayer limit. This two-dimensional form of topological materials also constitute a unique platform for examining origin of the anomalous high-harmonic generation, with potential applications as building blocks for scalable attosecond sources. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Comments: 22 pages, 4 figures

Solution-phase single-particle spectroscopy for probing multi-polaronic dynamics in quantum emitters at femtosecond resolution

Authors: Jiaojian Shi, Yuejun Shen, Feng Pan, Weiwei Sun, Anudeep Mangu, Cindy Shi, Amy McKeown-Green, Parivash Moradifar, Moungi G. Bawendi, William E. Moerner, Jennifer A. Dionne, Fang Liu, Aaron M. Lindenberg

Abstract: The development of many optical quantum technologies depends on the availability of solid-state single quantum emitters with near-perfect optical coherence. However, a standing issue that limits systematic improvement is the significant sample heterogeneity and lack of mechanistic understanding of microscopic energy flow at the single emitter level and ultrafast timescales. Here we develop solutio… ▽ More The development of many optical quantum technologies depends on the availability of solid-state single quantum emitters with near-perfect optical coherence. However, a standing issue that limits systematic improvement is the significant sample heterogeneity and lack of mechanistic understanding of microscopic energy flow at the single emitter level and ultrafast timescales. Here we develop solution-phase single-particle pump-probe spectroscopy with photon correlation detection that captures sample-averaged dynamics in single molecules and/or defect states with unprecedented clarity at femtosecond resolution. We apply this technique to single quantum emitters in two-dimensional hexagonal boron nitride, which suffers from significant heterogeneity and low quantum efficiency. From millisecond to nanosecond timescales, the translation diffusion, metastable-state-related bunching shoulders, rotational dynamics, and antibunching features are disentangled by their distinct photon-correlation timescales, which collectively quantify the normalized two-photon emission quantum yield. Leveraging its femtosecond resolution, spectral selectivity and ultralow noise (two orders of magnitude improvement over solid-state methods), we visualize electron-phonon coupling in the time domain at the single defect level, and discover the acceleration of polaronic formation driven by multi-electron excitation. Corroborated with results from a theoretical polaron model, we show how this translates to sample-averaged photon fidelity characterization of cascaded emission efficiency and optical decoherence time. Our work provides a framework for ultrafast spectroscopy in single emitters, molecules, or defects prone to photoluminescence intermittency and heterogeneity, opening new avenues of extreme-scale characterization and synthetic improvements for quantum information applications. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Comments: 35 pages, 4 figures

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Longitudinal compression of macro relativistic electron beam

Authors: An Li, Jiaru Shi, Hao Zha, Qiang Gao, Liuyuan Zhou, Huaibi Chen

Abstract: We presented a novel concept of longitudinal bunch train compression capable of manipulating relativistic electron beam in range of hundreds of meters. This concept has the potential to compress the electron beam with a high ratio and raise its power to an ultrahigh level. The method utilizes the spiral motion of electrons in a uniform magnetic field to fold hundreds-of-meters-long trajectories in… ▽ More We presented a novel concept of longitudinal bunch train compression capable of manipulating relativistic electron beam in range of hundreds of meters. This concept has the potential to compress the electron beam with a high ratio and raise its power to an ultrahigh level. The method utilizes the spiral motion of electrons in a uniform magnetic field to fold hundreds-of-meters-long trajectories into a compact set-up. The interval between bunches can be adjusted by modulating their sprial movement. The method is explored both analytically and numerically. Compared to set-up of similar size, such as chicane, this method can compress bunches at distinct larger scales and higher intensities, opening up new possibilities for generating beam with ultra-large energy storage. △ Less

Submitted 10 April, 2023; v1 submitted 21 February, 2023; originally announced February 2023.

Comments: 6 pages, 6 figures

Hyperuniform disordered parametric loudspeaker array

Authors: Kun Tang, Yuqi Wang, Shaobo Wang, Da Gao, Haojie Li, Xindong Liang, Patrick Sebbah, Yibin Li, Jin Zhang, Junhui Shi

Abstract: A steerable parametric loudspeaker array is known for its directivity and narrow beam width. However, it often suffers from the grating lobes due to periodic array distributions. Here we propose the array configuration of hyperuniform disorder, which is short-range random while correlated at large scales, as a promising alternative distribution of acoustic antennas in phased arrays. Angle-resolved… ▽ More A steerable parametric loudspeaker array is known for its directivity and narrow beam width. However, it often suffers from the grating lobes due to periodic array distributions. Here we propose the array configuration of hyperuniform disorder, which is short-range random while correlated at large scales, as a promising alternative distribution of acoustic antennas in phased arrays. Angle-resolved measurements reveal that the proposed array suppresses grating lobes and maintains a minimal radiation region in the vicinity of the main lobe for the primary frequency waves. These distinctive emission features benefit the secondary frequency wave in canceling the grating lobes regardless of the frequencies of the primary waves. Besides that, the hyperuniform disordered array is duplicatable, which facilitates extra-large array design without any additional computational efforts. △ Less

Submitted 13 April, 2023; v1 submitted 2 January, 2023; originally announced January 2023.

Accelerating quantum materials development with advances in transmission electron microscopy

Authors: Parivash Moradifar, Yin Liu, Jiaojian Shi, Matti Lawton Siukola Thurston, Hendrik Utzat, Tim B. van Driel, Aaron M. Lindenberg, Jennifer A. Dionne

Abstract: Quantum materials are driving a technology revolution in sensing, communication, and computing, while simultaneously testing many core theories of the past century. Materials such as topological insulators, complex oxides, quantum dots, color center hosting semiconductors, and other types of strongly correlated materials can exhibit exotic properties such as edge conductivity, multiferroicity, mag… ▽ More Quantum materials are driving a technology revolution in sensing, communication, and computing, while simultaneously testing many core theories of the past century. Materials such as topological insulators, complex oxides, quantum dots, color center hosting semiconductors, and other types of strongly correlated materials can exhibit exotic properties such as edge conductivity, multiferroicity, magnetoresistance, single photon emission, and optical-spin locking. These emergent properties arise and depend strongly on the materials detailed atomic scale structure, including atomic defects, dopants, and lattice stacking. In this review, after introduction of different classes of quantum materials and quantum excitations, we describe how progress in the field of electron microscopy, including in situ and in operando EM, can accelerate advances in quantum materials. Our review describes EM methods including: i) principles and operation modes of EM, ii) EM spectroscopies, such as electron energy loss spectroscopy, cathodoluminescence, and electron energy gain spectroscopy, iii) 4D scanning transmission electron microscopy, iv) dynamic and ultrafast EM, v) complimentary ultrafast spectroscopies, and vi) atomic electron tomography. We discuss how these methods inform structure function relations in quantum materials down to the picometer scale and femtosecond time resolution, and how they enable high resolution manipulation of quantum materials. Among numerous results, our review highlights how EM has enabled identification of the 3D structure of quantum defects, measuring reversible and metastable dynamics of quantum excitations, mapping exciton states and single photon emission, measuring nanoscale thermal transport and coupled excitation dynamics, and measuring the internal electric field of quantum heterointerfaces, all at the quantum materials intrinsic atomic and near atomic-length scale. △ Less

Submitted 20 December, 2022; originally announced December 2022.