-
First Measurement of the Total Inelastic Cross-Section of Positively-Charged Kaons on Argon at Energies Between 5.0 and 7.5 GeV
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1341 additional authors not shown)
Abstract:
ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each…
▽ More
ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting.
△ Less
Submitted 1 August, 2024;
originally announced August 2024.
-
Supernova Pointing Capabilities of DUNE
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr…
▽ More
The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage.
△ Less
Submitted 14 July, 2024;
originally announced July 2024.
-
Surfactant-laden bubble bursting: dynamics of capillary waves and Worthington jet at large Bond number
Authors:
Paula Pico,
Lyes Kahouadji,
Seungwon Shin,
Jalel Chergui,
Damir Juric,
Omar K. Matar
Abstract:
We present a numerical study of the main sub-stages preceding aerosol formation via bursting bubbles: capillary wave propagation along the bubble, convergence at the bubble's apex, the ascent of a Worthington jet and its break-up to release liquid drops. We focus on two crucial yet overlooked aspects of the system: the presence of surface-active agents and dynamics driven by non-negligible gravita…
▽ More
We present a numerical study of the main sub-stages preceding aerosol formation via bursting bubbles: capillary wave propagation along the bubble, convergence at the bubble's apex, the ascent of a Worthington jet and its break-up to release liquid drops. We focus on two crucial yet overlooked aspects of the system: the presence of surface-active agents and dynamics driven by non-negligible gravitational effects, quantified by the Bond number. Our results propose, for the first time, a mechanism explaining capillary wave retardation in the presence of surfactants, involving the transition from bi- to uni-directional Marangoni stresses, which pull the interface upwards, countering the motion of the waves. We also quantitatively elucidate the variable nature of the waves' velocity with various surfactant parameters, including surfactant solubility and elasticity, a departure from the constant behaviour well-documented in clean interfaces.
△ Less
Submitted 14 April, 2024;
originally announced April 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar Es-sghir,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1297 additional authors not shown)
Abstract:
Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN…
▽ More
Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 720 t of total liquid argon mass with 410 t of fiducial mass. A 5.4 ppm nitrogen contamination was present during the xenon doping campaign. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen.
△ Less
Submitted 2 August, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
New Beam Dynamics Code for Cyclotron Analysis
Authors:
G-H. Kim,
H-J. Cho,
B-H. Oh,
G-R. Hahn,
M. Chung,
S. Park,
S. Shin
Abstract:
This paper describes the beam dynamic simulation with transfer matrix method for cyclotron. Starting from a description on the equation of motion in the cyclotron, lattice functions were determined from transfer matrix method and the solutions for the 2nd-order nonlinear Hamiltonian were introduced and used in phase space particle tracking. Based on the description of beam dynamics in the cyclotro…
▽ More
This paper describes the beam dynamic simulation with transfer matrix method for cyclotron. Starting from a description on the equation of motion in the cyclotron, lattice functions were determined from transfer matrix method and the solutions for the 2nd-order nonlinear Hamiltonian were introduced and used in phase space particle tracking. Based on the description of beam dynamics in the cyclotron, simulation code was also developed for cyclotron design.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
The DUNE Far Detector Vertical Drift Technology, Technical Design Report
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1304 additional authors not shown)
Abstract:
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi…
▽ More
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model.
The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise.
In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered.
This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Highly tunable room-temperature plexcitons in monolayer WSe2 /gap-plasmon nanocavities
Authors:
Thomas P. Darlington,
Mahfujur Rahaman,
Kevin W. C. Kwock,
Emanuil Yanev,
Xuehao Wu,
Luke N. Holtzman,
Madisen Holbrook,
Gwangwoo Kim,
Kyung Yeol Ma,
Hyeon Suk Shin,
Andrey Krayev,
Matthew Strasbourg,
Nicholas J. Borys,
D. N. Basov,
Katayun Barmak,
James C. Hone,
Abhay N. Pasupathy,
Deep Jariwala,
P. James Schuck
Abstract:
The advancement of quantum photonic technologies relies on the ability to precisely control the degrees of freedom of optically active states. Here, we realize real-time, room-temperature tunable strong plasmon-exciton coupling in 2D semiconductor monolayers enabled by a general approach that combines strain engineering plus force- and voltage-adjustable plasmonic nanocavities. We show that the ex…
▽ More
The advancement of quantum photonic technologies relies on the ability to precisely control the degrees of freedom of optically active states. Here, we realize real-time, room-temperature tunable strong plasmon-exciton coupling in 2D semiconductor monolayers enabled by a general approach that combines strain engineering plus force- and voltage-adjustable plasmonic nanocavities. We show that the exciton energy and nanocavity plasmon resonance can be controllably toggled in concert by applying pressure with a plasmonic nanoprobe, allowing in operando control of detuning and coupling strength, with observed Rabi splittings >100 meV. Leveraging correlated force spectroscopy, nano-photoluminescence (nano-PL) and nano-Raman measurements, augmented with electromagnetic simulations, we identify distinct polariton bands and dark polariton states, and map their evolution as a function of nanogap and strain tuning. Uniquely, the system allows for manipulation of coupling strength over a range of cavity parameters without dramatically altering the detuning. Further, we establish that the tunable strong coupling is robust under multiple pressing cycles and repeated experiments over multiple nanobubbles. Finally, we show that the nanogap size can be directly modulated via an applied DC voltage between the substrate and plasmonic tip, highlighting the inherent nature of the concept as a plexcitonic nano-electro-mechanical system (NEMS). Our work demonstrates the potential to precisely control and tailor plexciton states localized in monolayer (1L) transition metal dichalcogenides (TMDs), paving the way for on-chip polariton-based nanophotonic applications spanning quantum information processing to photochemistry.
△ Less
Submitted 4 November, 2023;
originally announced November 2023.
-
Non-Destructive Imaging of Breakdown Process in Ferroelectric Capacitors Using \textit{In-situ} Laser-Based Photoemission Electron Microscopy
Authors:
Hirokazu Fujiwara,
Yuki Itoya,
Masaharu Kobayashi,
Cédric Bareille,
Shik Shin,
Toshiyuki Taniuchi
Abstract:
HfO$_2$-based ferroelectrics are one of the most actively developed functional materials for memory devices. However, in HfO$_2$-based ferroelectric devices, dielectric breakdown is a main failure mechanism during repeated polarization switching. Elucidation of the breakdown process may broaden the scope of applications for the ferroelectric HfO$_2$. Here, we report direct observations of a breakd…
▽ More
HfO$_2$-based ferroelectrics are one of the most actively developed functional materials for memory devices. However, in HfO$_2$-based ferroelectric devices, dielectric breakdown is a main failure mechanism during repeated polarization switching. Elucidation of the breakdown process may broaden the scope of applications for the ferroelectric HfO$_2$. Here, we report direct observations of a breakdown process in HfO$_2$-based ferroelectric capacitors, by \textit{in-situ} laser-based photoemission electron microscopy (laser-PEEM). We have not only clearly visualized the hard dielectric breakdown (HDB) spot, but also observed the regions responsible for the soft dielectric breakdown (SDB) which is a precursor phenomenon to HDB. It was found that the low-resistance region formed after SDB is wider than the conduction path formed after HDB. Furthermore, our spectromicroscopic analysis revealed that the photoelectron spectrum after SDB shows an enhancement in intensity without spectral-shape modulation, interpreted that the initially existed defects are increased. In the HDB spot, however, an additional shoulder structure was observed. These results provide spectroscopic evidence that the electronic states responsible for the conduction path after SDB are different from those after HDB. Through this work, we propose this microscopic approach as a versatile tool for studying buried materials as they are, accelerating the development of material engineering for advanced electronic devices.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Flow Driven Oil Recovery Enhanced with Structural Disjoining Pressure
Authors:
Shane Laibach,
Egor Vinogradov,
Jasper Stedman,
M G Guru Aravindan,
Myles Geise,
Viet Sang Doan,
Sangwoo Shin,
Craig Snoeyink
Abstract:
Nanofluids have the potential to enhance oil recovery through the structural disjoining pressure, a pressure developed when nanoparticles concentrate at the three-phase contact line. A model microfluidic porous network is used to measure the percentage of oil displaced from this channel as the volume fraction of a Triton X-100 micelle nanofluid is varied from 0 - 30%. The percentage of oil displac…
▽ More
Nanofluids have the potential to enhance oil recovery through the structural disjoining pressure, a pressure developed when nanoparticles concentrate at the three-phase contact line. A model microfluidic porous network is used to measure the percentage of oil displaced from this channel as the volume fraction of a Triton X-100 micelle nanofluid is varied from 0 - 30%. The percentage of oil displaced varies nearly linearly with micellar nanoparticle volume fraction starting with 39% using deionized water and 89% using a volume fraction of 30%. While the trend is clear, significant variability between experiments was observed for a fixed nanofluid volume fraction. This indicates that surface energy heterogeneity is important for the nanofluid oil displacement performance.
△ Less
Submitted 3 October, 2023;
originally announced October 2023.
-
MoS$_{2}$/Al$_{0.68}$Sc$_{0.32}$N negative capacitance field-effect transistors
Authors:
Seunguk Song,
Kwan-Ho Kim,
Srikrishna Chakravarthi,
Zirun Han,
Gwangwoo Kim,
Kyung Yeol Ma,
Hyeon Suk Shin,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characte…
▽ More
Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characteristics of a MoS$_{2}$ negative capacitance FET (NCFET) based on an AlScN ferroelectric material. We experimentally demonstrate the effect of a dielectric layer in the gate stack on the memory window and subthreshold swing (SS) of the NCFET. We show that the hysteresis behavior of transfer characteristics in the NCFET can be minimized with the inclusion of a non-ferroelectric dielectric layer, which fulfills the capacitance-matching condition. Remarkably, we also observe the NC effect in MoS$_{2}$/AlScN NCFETs arrays based on large-area monolayer MoS$_{2}$ synthesized by chemical vapor deposition, showing the SS values smaller than its thermionic limit (~36-60 mV/dec) and minimal variation in threshold voltages (< 20 mV).
△ Less
Submitted 31 July, 2023;
originally announced August 2023.
-
Data-driven Nonlinear Parametric Model Order Reduction Framework using Deep Hierarchical Variational Autoencoder
Authors:
SiHun Lee,
Sangmin Lee,
Kijoo Jang,
Haeseong Cho,
SangJoon Shin
Abstract:
A data-driven parametric model order reduction (MOR) method using a deep artificial neural network is proposed. The present network, which is the least-squares hierarchical variational autoencoder (LSH-VAE), is capable of performing nonlinear MOR for the parametric interpolation of a nonlinear dynamic system with a significant number of degrees of freedom. LSH-VAE exploits two major changes to the…
▽ More
A data-driven parametric model order reduction (MOR) method using a deep artificial neural network is proposed. The present network, which is the least-squares hierarchical variational autoencoder (LSH-VAE), is capable of performing nonlinear MOR for the parametric interpolation of a nonlinear dynamic system with a significant number of degrees of freedom. LSH-VAE exploits two major changes to the existing networks: a hierarchical deep structure and a hybrid weighted, probabilistic loss function. The enhancements result in a significantly improved accuracy and stability compared against the conventional nonlinear MOR methods, autoencoder, and variational autoencoder. Upon LSH-VAE, a parametric MOR framework is presented based on the spherically linear interpolation of the latent manifold. The present framework is validated and evaluated on three nonlinear and multiphysics dynamic systems. First, the present framework is evaluated on the fluid-structure interaction benchmark problem to assess its efficiency and accuracy. Then, a highly nonlinear aeroelastic phenomenon, limit cycle oscillation, is analyzed. Finally, the present framework is applied to a three-dimensional fluid flow to demonstrate its capability of efficiently analyzing a significantly large number of degrees of freedom. The performance of LSH-VAE is emphasized by comparing its results against that of the widely used nonlinear MOR methods, convolutional autoencoder, and $β$-VAE. The present framework exhibits a significantly enhanced accuracy to the conventional methods while still exhibiting a large speed-up factor.
△ Less
Submitted 9 July, 2023;
originally announced July 2023.
-
Exciton Confinement in Two-Dimensional, In-Plane, Quantum Heterostructures
Authors:
Gwangwoo Kim,
Benjamin Huet,
Christopher E. Stevens,
Kiyoung Jo,
Jeng-Yuan Tsai,
Saiphaneendra Bachu,
Meghan Leger,
Kyung Yeol Ma,
Nicholas R. Glavin,
Hyeon Suk Shin,
Nasim Alem,
Qimin Yan,
Joshua R. Hedrickson,
Joan M. Redwing,
Deep Jariwala
Abstract:
Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engine…
▽ More
Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engineering. However, realizing such laterally confined 2D monolayers and systematically controlling size-dependent optical properties remain significant challenges. Here, we report the observation of lateral confinement of excitons in epitaxially grown in-plane MoSe2 quantum dots (~15-60 nm wide) inside a continuous matrix of WSe2 monolayer film via a sequential epitaxial growth process. Various optical spectroscopy techniques reveal the size-dependent exciton confinement in the MoSe2 monolayer quantum dots with exciton blue shift (12-40 meV) at a low temperature as compared to continuous monolayer MoSe2. Finally, single-photon emission was also observed from the smallest dots at 1.6 K. Our study opens the door to compositionally engineered, tunable, in-plane quantum light sources in 2D semiconductors.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
From Effective Interactions Extracted Using Hi-C Data to Chromosome Structures in Conventional and Inverted Nuclei
Authors:
Sucheol Shin,
Guang Shi,
D. Thirumalai
Abstract:
Contact probabilities between loci, separated by arbitrary genomic distance, for a number of cell types have been reported using genome-wide chromosome conformation capture (Hi-C) experiments. How to extract the effective interaction energies between active euchromatin (A) and inactive heterochromatin (B) directly from the experimental data, without an underlying polymer model, is unsolved. Here,…
▽ More
Contact probabilities between loci, separated by arbitrary genomic distance, for a number of cell types have been reported using genome-wide chromosome conformation capture (Hi-C) experiments. How to extract the effective interaction energies between active euchromatin (A) and inactive heterochromatin (B) directly from the experimental data, without an underlying polymer model, is unsolved. Here, we first calculate the pairwise effective interaction energies (A-A, B-B, or A-B) for interphase chromosomes based on Hi-C data by using the concept of Statistical Potential (SP), which assumes that the interaction energy between two loci is proportional to the logarithm of the frequency with which they interact. Polymer simulations, using the extracted interaction energy values $\textit{without any parameter}$, reproduce the segregation between A and B type loci (compartments), and the emergence of topologically associating domains (TADs), features that are prominent in the Hi-C data for interphase chromosomes. Remarkably, the values of the SP automatically satisfy the Flory-Huggins phase separation criterion for all the chromosomes, which explains the mechanism of compartment formation in interphase chromosomes. Strikingly, simulations using the SP that accounts for pericentromeric constitutive heterochromatin (C-type), show hierarchical structuring with the high density of C-type loci in the nuclear center, followed by localization of the B type loci, with euchromatin being confined to the nuclear periphery, which differs from the expected nuclear organization of interphase chromosomes, but is in accord with the imaging data of the inverted nuclei found in photoreceptor rods in nocturnal mammals. The proposed parameter free method and applications show that compartment formation in conventional and inverted nuclei is best explained by the inequality between the effective interaction energies.
△ Less
Submitted 14 August, 2023; v1 submitted 5 April, 2023;
originally announced April 2023.
-
Shape- and orientation-dependent diffusiophoresis of colloidal ellipsoids
Authors:
Viet Sang Doan,
Dong-Ook Kim,
Craig Snoeyink,
Ying Sun,
Sangwoo Shin
Abstract:
We present the diffusiophoresis of ellipsoidal particles induced by ionic solute gradients. Contrary to the common expectation that diffusiophoresis is shape independent, here we show experimentally that this assumption breaks down when the thin Debye layer approximation is relaxed. By tracking the translation and rotation of various ellipsoids, we find that the phoretic mobility of ellipsoids is…
▽ More
We present the diffusiophoresis of ellipsoidal particles induced by ionic solute gradients. Contrary to the common expectation that diffusiophoresis is shape independent, here we show experimentally that this assumption breaks down when the thin Debye layer approximation is relaxed. By tracking the translation and rotation of various ellipsoids, we find that the phoretic mobility of ellipsoids is sensitive to the eccentricity and the orientation of the ellipsoid relative to the imposed solute gradient, and can further lead to nonmonotonic behavior under strong confinement. We show that such a shape- and orientation-dependent diffusiophoresis of colloidal ellipsoids can be easily captured by modifying theories for spheres.
△ Less
Submitted 17 May, 2023; v1 submitted 22 February, 2023;
originally announced February 2023.
-
Chiral electroluminescence from thin-film perovskite metacavities
Authors:
Seongheon Kim,
Soo-Chan An,
Younggon Kim,
Yun Seop Shin,
Alexander A. Antonov,
In Cheol Seo,
Byung Hoon Woo,
Yeonsoo Lim,
Maxim V. Gorkunov,
Yuri S. Kivshar,
Jin Young Kim,
Young Chul Jun
Abstract:
Chiral light sources realized in ultracompact device platforms are highly desirable for various applications. Among active media employed for thin-film emission devices, lead-halide perovskites have been extensively studied for photoluminescence due to their exceptional properties. However, up to date, there have been no demonstrations of chiral electroluminescence with a substantial degree of cir…
▽ More
Chiral light sources realized in ultracompact device platforms are highly desirable for various applications. Among active media employed for thin-film emission devices, lead-halide perovskites have been extensively studied for photoluminescence due to their exceptional properties. However, up to date, there have been no demonstrations of chiral electroluminescence with a substantial degree of circular polarization (DCP), being critical for the development of practical devices. Here, we propose a new concept of chiral light sources based on a thin-film perovskite metacavity and experimentally demonstrate chiral electroluminescence with DCP approaching 0.38. We design a metacavity created by a metal and a dielectric metasurface supporting photonic eigenstates with close-to-maximum chiral response. Chiral cavity modes facilitate asymmetric electroluminescence of pairs of left and right circularly polarized waves propagating in the opposite oblique directions. The proposed ultracompact light sources are especially advantageous for many applications requiring chiral light beams of both helicities.
△ Less
Submitted 10 February, 2023;
originally announced February 2023.
-
Viscosity measurements of glycerol in a parallel-plate rheometer exposed to atmosphere
Authors:
Jesse T. Ault,
Sangwoo Shin,
Allan Garcia,
Antonio Perazzo,
Howard A. Stone
Abstract:
Glycerol is a hygroscopic fluid that spontaneously absorbs water vapor from the atmosphere. For applications involving glycerol, care must be taken to avoid exposure to humidity, since its viscosity decreases quickly as water is absorbed. We report experimental measurements of the viscosity of glycerol in a parallel-plate rheometer where the outer interface is exposed to atmosphere. The measuremen…
▽ More
Glycerol is a hygroscopic fluid that spontaneously absorbs water vapor from the atmosphere. For applications involving glycerol, care must be taken to avoid exposure to humidity, since its viscosity decreases quickly as water is absorbed. We report experimental measurements of the viscosity of glycerol in a parallel-plate rheometer where the outer interface is exposed to atmosphere. The measurements decrease with time as water is absorbed from the atmosphere and transported throughout the glycerol via diffusion and advection. Measured viscosities drop faster at higher relative humidities, confirming the role of hygroscopicity on the transient viscosities. The rate of viscosity decrease shows a non-monotonic relationship with the rheometer gap height. This behavior is explained by considering the transition from diffusion-dominated transport in the narrow gap regime to the large gap regime where transport is dominated by inertia-driven secondary flows. Numerical simulations of the water absorption and transport confirm this non-monotonic behavior. The experimental viscosity measurements show unexpectedly fast decreases at very small gap heights, violating the parallel-plate, axisymmetric model. We propose that this drop-off may be due to misalignment in the rheometer that becomes non-negligible for small gaps. Theoretical considerations show that secondary flows in a misaligned rheometer dominate the typical secondary inertial flows in parallel-plate rheometers at small gaps. Finally, simulations in a misaligned parallel-plate system demonstrate the same sharp drop-off in viscosity measurements at small gap heights. This modeling can be used to estimate the gap height where misalignment effects dominate the transient glycerol viscosity measurements.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
Drop encapsulation and bubble bursting in surfactant-laden flows in capillary channels
Authors:
Paula Pico,
Lyes Kahouadji,
Seungwon Shin,
Jalel Chergui,
Damir Juric,
Omar K. Matar
Abstract:
We present a parametric study of the unsteady phenomena associated with the flow of elongated gas bubbles travelling through liquid-filled square capillaries under high Weber number conditions. These conditions consistently induce the formation of a re-entrant jet at the back of the bubble that commonly gives way to a deep liquid cavity. Subsequent steps include pinch-off events in the cavity to g…
▽ More
We present a parametric study of the unsteady phenomena associated with the flow of elongated gas bubbles travelling through liquid-filled square capillaries under high Weber number conditions. These conditions consistently induce the formation of a re-entrant jet at the back of the bubble that commonly gives way to a deep liquid cavity. Subsequent steps include pinch-off events in the cavity to generate one or multiple encapsulated drops which may coalesce, in conjunction with the bursting of the bubble-liquid interface by either the cavity or the drops. Some of these interfacial instabilities have previously been reported experimentally (Olbricht 1996) and numerically (Izbassarov & Muradoglu 2016) for liquid-liquid flow in microchannels. We carry out three-dimensional direct numerical simulations based on a hybrid interface-tracking/level-set method capable of accounting for the presence and dynamic exchange of surfactants between the liquid bulk phase and the liquid-gas interface. Our results indicate that the delicate interplay amongst inertia, capillarity, viscosity, surfactant adsorption/desorption kinetics, and Marangoni stresses has a dramatic influence over the non-axisymmetric morphological structures of the encapsulated drops-elongated bubble. This strong coupling also influences the pinch-off time, penetration depth of the cavity, and number, size, and velocity of the encapsulated drops across the bubble. The observed phenomena are summarised in three main morphological regimes based on surfactant-related parameters and dimensionless groups. A discussion of the flow regime maps is also provided.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
Dielectric-tensor reconstruction of highly scattering birefringent samples
Authors:
Herve Hugonnet,
Moosung Lee,
Seungwoo Shin,
YongKeun Park
Abstract:
Many important microscopy samples, such as liquid crystals, biological tissue, or starches, are birefringent in nature. They scatter light differently depending on the light polarization and molecular orientations. The complete characterization of a birefringent sample is a challenging task because its 3 x 3 dielectric tensor must be reconstructed at every three-dimensional position. Moreover, obt…
▽ More
Many important microscopy samples, such as liquid crystals, biological tissue, or starches, are birefringent in nature. They scatter light differently depending on the light polarization and molecular orientations. The complete characterization of a birefringent sample is a challenging task because its 3 x 3 dielectric tensor must be reconstructed at every three-dimensional position. Moreover, obtaining a birefringent tomogram is more arduous for thick samples, where multiple light scattering should also be considered. In this study, we developed a new dielectric tensor tomography algorithm that enables full characterization of highly scattering birefringent samples by solving the vectoral inverse scattering problem considering multiple light scattering. We proposed a discrete image-processing theory to compute the error backpropagation of vectorially diffracting light. Finally, our theory was experimentally demonstrated using both synthetic and biologically birefringent samples.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
Highly-parallelized simulation of a pixelated LArTPC on a GPU
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1282 additional authors not shown)
Abstract:
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr…
▽ More
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Advances in the Large Area Picosecond Photo-Detector (LAPPD): 8" x 8" MCP-PMT with Capacitively Coupled Readout
Authors:
Shawn Shin,
Melvin Aviles,
Stephen Clarke,
Stefan Cwik,
Michael Foley,
Cole Hamel,
Alexey Lyashenko,
Derrick Mensah,
Michael Minot,
Mark Popecki,
Michael Stochaj
Abstract:
We present advances made in the Large Area Picosecond Photodetector (LAPPD), an 8" $\times$ 8" microchannel plate photomultiplier tube (MCP-PMT), since pilot production was initiated at Incom, Inc. in 2018. The Gen-I LAPPD utilizes a stripline anode for direct charge readout. The novel Gen-II LAPPD employs an internal resistive thin-film which capacitively couples to a customizable external signal…
▽ More
We present advances made in the Large Area Picosecond Photodetector (LAPPD), an 8" $\times$ 8" microchannel plate photomultiplier tube (MCP-PMT), since pilot production was initiated at Incom, Inc. in 2018. The Gen-I LAPPD utilizes a stripline anode for direct charge readout. The novel Gen-II LAPPD employs an internal resistive thin-film which capacitively couples to a customizable external signal readout board, streamlining production. The Gen-II LAPPD, with an active area of 373 cm$^2$, is capable of high single photoelectron (PE) gain of $\sim$10$^7$, low dark rates ($\sim$1 kHz/cm$^2$), single PE timing resolution of $\sim$65 ps, and $\mathcal{O}$(mm) position resolution. Coupled with a UV-grade fused silica window, the LAPPD features a high quantum efficiency (QE) bialkali photocathode of $>$30% with spectral response down to $\sim$165 nm. The LAPPD is an excellent candidate for electromagnetic calorimeter (ECAL) timing layers, photon-based neutrino detectors, high energy collider experiments, medical imaging systems, and nuclear non-proliferation applications.
△ Less
Submitted 10 May, 2024; v1 submitted 6 December, 2022;
originally announced December 2022.
-
Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1235 additional authors not shown)
Abstract:
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is…
▽ More
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons.
△ Less
Submitted 31 May, 2023; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Impact of droplets onto surfactant-laden thin liquid films
Authors:
C. R. Constante-Amores,
L. Kahouadji,
S. Shin,
J. Chergui,
D. Juric,
J. R. Castrejon-Pita,
O. K. Matar,
A. A. Castrejon-Pita
Abstract:
We study the effect of insoluble surfactants on the impact of surfactant-free droplets on surfactant-laden thin liquid films via a fully three-dimensional direct numerical simulations approach that employs a hybrid interface-tracking/level-set method, and by taking into account surfactant-induced Marangoni stresses due to gradients in interfacial surfactant concentration. Our numerical predictions…
▽ More
We study the effect of insoluble surfactants on the impact of surfactant-free droplets on surfactant-laden thin liquid films via a fully three-dimensional direct numerical simulations approach that employs a hybrid interface-tracking/level-set method, and by taking into account surfactant-induced Marangoni stresses due to gradients in interfacial surfactant concentration. Our numerical predictions for the temporal evolution of the surfactant-free crown are validated against the experimental work by Che and Matar (2017). We focus on the crown-splash regime, and we observe that the crown dynamics evolves through various stages: from the the growth of linear modes (through a Rayleigh- Plateau instability) to the development of nonlinearities leading to primary and secondary breakup events (through droplet shedding modulated by an end-pinching mechanism). We show that the addition of surfactants does not affect the wave selection via the Rayleigh-Plateau instability. However, the presence of surfactants plays a key role in the late stages of the dynamics as soon as the ligaments are driven out from the rim. Surfactant-induced Marangoni stresses delay the end-pinching mechanisms to result in longer ligaments prior to their capillary singularity, while also promoting the spanwise merging between ligaments. Finally, we show that the addition of surfactants leads to surface rigidification and consequently to the retardation of the flow dynamics.
△ Less
Submitted 7 March, 2023; v1 submitted 23 October, 2022;
originally announced October 2022.
-
Regularization of dielectric tensor tomography using total variation
Authors:
Herve Hugonnet,
Seungwoo Shin,
Yongkeun Park
Abstract:
Dielectric tensor tomography reconstructs the three-dimensional dielectric tensors of microscopic objects and provides information about the crystalline structure orientations and principal refractive indices. Because dielectric tensor tomography is based on transmission measurement, it suffers from the missing cone problem, which causes poor axial resolution, underestimation of the refractive ind…
▽ More
Dielectric tensor tomography reconstructs the three-dimensional dielectric tensors of microscopic objects and provides information about the crystalline structure orientations and principal refractive indices. Because dielectric tensor tomography is based on transmission measurement, it suffers from the missing cone problem, which causes poor axial resolution, underestimation of the refractive index, and halo artifacts. In this study, we present the generalization of total variation regularization to three-dimensional tensor distributions. In particular, demonstrate the reduction of artifacts when applied to dielectric tensor tomography.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
Spatially multiplexed dielectric tensor tomography
Authors:
Juheon Lee,
Seungwoo Shin,
Herve Hugonnet,
Yongkeun Park
Abstract:
Dielectric tensor tomography (DTT) enables the reconstruction of three-dimensional (3D) dielectric tensors, which provides a physical measure of 3D optical anisotropy. Herein, we present a cost-effective and robust method for DTT measurement using a multiplexing approach. By exploiting two orthogonally polarized reference beams with different angles in an off-axis interferometer, two polarization-…
▽ More
Dielectric tensor tomography (DTT) enables the reconstruction of three-dimensional (3D) dielectric tensors, which provides a physical measure of 3D optical anisotropy. Herein, we present a cost-effective and robust method for DTT measurement using a multiplexing approach. By exploiting two orthogonally polarized reference beams with different angles in an off-axis interferometer, two polarization-sensitive interferograms were overlapped and recorded using a single camera. Then, the two multiplexed interferograms were separated in the Fourier domain, enabling the reconstruction of polarization-sensitive fields. Finally, by measuring the polarization-sensitive fields for various illumination angles, 3D dielectric tensor tomograms were reconstructed. The proposed method was experimentally demonstrated by reconstructing the 3D dielectric tensors of various liquid crystal particles with radial and bipolar orientational configurations.
△ Less
Submitted 3 September, 2022;
originally announced September 2022.
-
Direct numerical simulations of turbulent jets: vortex-interface-surfactant interactions
Authors:
C. R. Constante-Amores,
T. Abadie,
L. Kahouadji,
S. Shin,
J. Chergui,
D. Juric,
A. A. Castrejon-Pita,
O. K. Matar
Abstract:
We study the effect of insoluble surfactants on the spatio-temporal evolution of turbulent jets. We use three-dimensional numerical simulations and employ an interface-tracking/level-set method that accounts for surfactant-induced Marangoni stresses. The present study builds on our previous work (Constante et al., 2021, J. Fluid Mech., 922, A6) in which we examined in detail the vortex-surface int…
▽ More
We study the effect of insoluble surfactants on the spatio-temporal evolution of turbulent jets. We use three-dimensional numerical simulations and employ an interface-tracking/level-set method that accounts for surfactant-induced Marangoni stresses. The present study builds on our previous work (Constante et al., 2021, J. Fluid Mech., 922, A6) in which we examined in detail the vortex-surface interaction in the absence of surfactants. Numerical solutions are obtained for a wide range of Weber and elasticity numbers in which vorticity production is generated by surface deformation and surfactant-induced Marangoni stresses. The present work demonstrates, for the first time, the crucial role of Marangoni stresses, brought about by surfactant concentration gradients, in the formation of coherent, hairpin-like vortex structures. These structures have a profound influence on the development of the three-dimensional interfacial dynamics. We also present theoretical expressions for the mechanisms that influence the rate of production of circulation in the presence of surfactants for a general, three-dimensional, two-phase flow and highlight the dominant contribution of Marangoni stresses.
△ Less
Submitted 17 October, 2022; v1 submitted 12 July, 2022;
originally announced July 2022.
-
Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
B. Ali-Mohammadzadeh,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo
, et al. (1203 additional authors not shown)
Abstract:
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char…
▽ More
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation.
△ Less
Submitted 17 July, 2023; v1 submitted 29 June, 2022;
originally announced June 2022.
-
First High-speed Video Camera Observations of a Lightning Flash Associated with a Downward Terrestrial Gamma-ray Flash
Authors:
R. U. Abbasi,
M. M. F. Saba,
J. W. Belz,
P. R. Krehbiel,
W. Rison,
N. Kieu,
D. R. da Silva,
Dan Rodeheffer,
M. A. Stanley,
J. Remington,
J. Mazich,
R. LeVon,
K. Smout,
A. Petrizze,
T. Abu-Zayyad,
M. Allen,
Y. Arai,
R. Arimura,
E. Barcikowski,
D. R. Bergman,
S. A. Blake,
I. Buckland,
B. G. Cheon,
M. Chikawa,
T. Fujii
, et al. (127 additional authors not shown)
Abstract:
In this paper, we present the first high-speed video observation of a cloud-to-ground lightning flash and its associated downward-directed Terrestrial Gamma-ray Flash (TGF). The optical emission of the event was observed by a high-speed video camera running at 40,000 frames per second in conjunction with the Telescope Array Surface Detector, Lightning Mapping Array, interferometer, electric-field…
▽ More
In this paper, we present the first high-speed video observation of a cloud-to-ground lightning flash and its associated downward-directed Terrestrial Gamma-ray Flash (TGF). The optical emission of the event was observed by a high-speed video camera running at 40,000 frames per second in conjunction with the Telescope Array Surface Detector, Lightning Mapping Array, interferometer, electric-field fast antenna, and the National Lightning Detection Network. The cloud-to-ground flash associated with the observed TGF was formed by a fast downward leader followed by a very intense return stroke peak current of -154 kA. The TGF occurred while the downward leader was below cloud base, and even when it was halfway in its propagation to ground. The suite of gamma-ray and lightning instruments, timing resolution, and source proximity offer us detailed information and therefore a unique look at the TGF phenomena.
△ Less
Submitted 9 August, 2023; v1 submitted 10 May, 2022;
originally announced May 2022.
-
Transcription-induced active forces suppress chromatin motion
Authors:
Sucheol Shin,
Guang Shi,
Hyun Woo Cho,
D. Thirumalai
Abstract:
The organization of interphase chromosomes in a number of species is starting to emerge thanks to advances in a variety of experimental techniques. However, much less is known about the dynamics, especially in the functional states of chromatin. Some experiments have shown that the motility of individual loci in human interphase chromosome decreases during transcription, and increases upon inhibit…
▽ More
The organization of interphase chromosomes in a number of species is starting to emerge thanks to advances in a variety of experimental techniques. However, much less is known about the dynamics, especially in the functional states of chromatin. Some experiments have shown that the motility of individual loci in human interphase chromosome decreases during transcription, and increases upon inhibiting transcription. This is a counter-intuitive finding because it is thought that the active mechanical force ($F$) on the order of ten pico-newtons, generated by RNA polymerase II (RNAPII) that is presumably transmitted to the gene-rich region of the chromatin, would render it more open, thus enhancing the mobility. We developed a minimal active copolymer model for interphase chromosomes to investigate how $F$ affects the dynamical properties of chromatin. The movements of the loci in the gene-rich region are suppressed in an intermediate range of $F$, and are enhanced at small $F$ values, which has also been observed in experiments. In the intermediate $F$, the bond length between consecutive loci increases, becoming commensurate with the distance at the minimum of the attractive interaction between non-bonded loci. This results in a transient disorder-to-order transition, leading to a decreased mobility during transcription. Strikingly, the $F$-dependent change in the locus dynamics preserves the organization of the chromosome at $F=0$. Transient ordering of the loci, which is not found in the polymers with random epigenetic profiles, in the gene-rich region might be a plausible mechanism for nucleating a dynamic network involving transcription factors, RNAPII, and chromatin.
△ Less
Submitted 20 January, 2024; v1 submitted 30 April, 2022;
originally announced May 2022.
-
Reduced Recombination via Tunable Surface Fields in Perovskite Solar Cells
Authors:
Dane W. deQuilettes,
Jason Jungwan Yoo,
Roberto Brenes,
Felix Utama Kosasih,
Madeleine Laitz,
Benjia Dak Dou,
Daniel J. Graham,
Kevin Ho,
Seong Sik Shin,
Caterina Ducati,
Moungi Bawendi,
Vladimir Bulović
Abstract:
The ability to reduce energy loss at semiconductor surfaces through passivation or surface field engineering has become an essential step in the manufacturing of efficient photovoltaic (PV) and optoelectronic devices. Similarly, surface modification of emerging halide perovskites with quasi-2D heterostructures is now ubiquitous to achieve PV power conversion efficiencies (PCEs) > 22% and has enabl…
▽ More
The ability to reduce energy loss at semiconductor surfaces through passivation or surface field engineering has become an essential step in the manufacturing of efficient photovoltaic (PV) and optoelectronic devices. Similarly, surface modification of emerging halide perovskites with quasi-2D heterostructures is now ubiquitous to achieve PV power conversion efficiencies (PCEs) > 22% and has enabled single-junction PV devices to reach 25.7%, yet a fundamental understanding to how these treatments function is still generally lacking. This has established a bottleneck for maximizing beneficial improvements as no concrete selection and design rules currently exist. Here we uncover a new type of tunable passivation strategy and mechanism found in perovskite PV devices that were the first to reach the > 25% PCE milestone, which is enabled by surface treating a bulk perovskite layer with hexylammonium bromide (HABr). We uncover the simultaneous formation of an iodide-rich 2D layer along with a Br halide gradient achieved through partial halide exchange that extends from defective surfaces and grain boundaries into the bulk layer. We demonstrate and directly visualize the tunability of both the 2D layer thickness, halide gradient, and band structure using a unique combination of depth-sensitive nanoscale characterization techniques. We show that the optimization of this interface can extend the charge carrier lifetime to values > 30 μs, which is the longest value reported for a direct bandgap semiconductor (GaAs, InP, CdTe) over the past 50 years. Importantly, this work reveals an entirely new strategy and knob for optimizing and tuning recombination and charge transport at semiconductor interfaces and will likely establish new frontiers in achieving the next set of perovskite device performance records.
△ Less
Submitted 9 November, 2022; v1 submitted 15 April, 2022;
originally announced April 2022.
-
Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1204 additional authors not shown)
Abstract:
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det…
▽ More
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation.
△ Less
Submitted 30 June, 2022; v1 submitted 31 March, 2022;
originally announced March 2022.
-
Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1202 additional authors not shown)
Abstract:
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and…
▽ More
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties
△ Less
Submitted 3 June, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
Role of kidney stones in renal pelvis flow
Authors:
C. R. Constante-Amores,
L. Kahouadji,
J. G. Williams,
D. E. Moulton,
B. W. Turney,
S. Shin,
J. Chergui,
D. Juric,
S. L. Waters
Abstract:
We examine the time-dependent flow dynamics inside an idealised renal pelvis in the context of a surgical procedure for kidney stone removal, extending previous work by Williams et al. (2020,2021), who showed how vortical flow structures can hinder mass transport in a canonical two-dimensional domain. Here, we examine the time-dependent evolution of these vortical flow structures in three-dimensio…
▽ More
We examine the time-dependent flow dynamics inside an idealised renal pelvis in the context of a surgical procedure for kidney stone removal, extending previous work by Williams et al. (2020,2021), who showed how vortical flow structures can hinder mass transport in a canonical two-dimensional domain. Here, we examine the time-dependent evolution of these vortical flow structures in three-dimensions, and incorporate the presence of rigid kidney stones. We perform direct numerical simulations, solving the transient Navier-Stokes equations in a spherical domain. The results shed light on the crucial role of flow circulation in the renal cavity and its effect on the trajectories of rigid stones. We demonstrate that stones can either be washed out of the cavity along with the fluid, or be trapped in the cavity via their interaction with vortical flow structures. Additionally, we study the effect of multiple stones in the flow field within the cavity in terms of the kinetic energy, entrapped fluid volume, and the clearance rate of a passive tracer modelled via an advection--diffusion equation. We demonstrate that the flow in the presence of stones features a higher vorticity production within the cavity compared with the stone-free cases.
△ Less
Submitted 23 November, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Advanced RF Structures for Wakefield Acceleration and High-Gradient Research
Authors:
Xueying Lu,
Jiahang Shao,
John Power,
Chunguang Jing,
Gwanghui Ha,
Philippe Piot,
Alexander Zholents,
Richard Temkin,
Michael Shapiro,
Julian Picard,
Bagrat Grigoryan,
Chuanxiang Tang,
Yingchao Du,
Jiaru Shi,
Hao Zha,
Dao Xiang,
Emilio Nanni,
Brendan O'Shea,
Yuri Saveliev,
Thomas Pacey,
James Rosenzweig,
Gerard Andonian,
Evgenya Simakov,
Francois Lemery,
Alex Murokh
, et al. (6 additional authors not shown)
Abstract:
Structure wakefield acceleration (SWFA) is one of the most promising AAC schemes in several recent strategic reports, including DOE's 2016 AAC Roadmap, report on the Advanced and Novel Accelerators for High Energy Physics Roadmap (ANAR), and report on Accelerator and Beam Physics Research Goals and Opportunities. SWFA aims to raise the gradient beyond the limits of conventional radiofrequency (RF)…
▽ More
Structure wakefield acceleration (SWFA) is one of the most promising AAC schemes in several recent strategic reports, including DOE's 2016 AAC Roadmap, report on the Advanced and Novel Accelerators for High Energy Physics Roadmap (ANAR), and report on Accelerator and Beam Physics Research Goals and Opportunities. SWFA aims to raise the gradient beyond the limits of conventional radiofrequency (RF) accelerator technology, and thus the RF to beam energy efficiency, by reducing RF breakdowns from confining the microwave energy in a short (on the order of about 10 ns) and intense pulse excited by a drive beam. We envision that the following research topics, within the scope of AF7, are of great interest in the next decade: advanced wakefield structures, terahertz and sub-terahertz (THz) structures, and RF breakdown physics. Research on SWFA in the above directions would directly contribute to long-term large-scale applications, including AAC-based linear colliders and compact light sources. There is also potentially a strong synergy between SWFA and other AAC concepts, when structures are combined with plasmas into hybrid AAC schemes. Research on novel structures is at the core of advancing SWFA, and is critical to future AAC-based linear colliders; at the same, it has a strong synergy with other directions, such as cavity designs, high-power microwave systems and sources, and compact light sources.
△ Less
Submitted 23 March, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Low-Energy Physics in Neutrino LArTPCs
Authors:
D. Caratelli,
W. Foreman,
A. Friedland,
S. Gardiner,
I. Gil-Botella,
G. Karagiorgi,
M. Kirby,
G. Lehmann Miotto,
B. R. Littlejohn,
M. Mooney,
J. Reichenbacher,
A. Sousa,
K. Scholberg,
J. Yu,
T. Yang,
S. Andringa,
J. Asaadi,
T. J. C. Bezerra,
F. Capozzi,
F. Cavanna,
E. Church,
A. Himmel,
T. Junk,
J. Klein,
I. Lepetic
, et al. (264 additional authors not shown)
Abstract:
In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below…
▽ More
In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below the few tens of MeV range. 2) Low-energy signatures are an integral part of GeV-scale accelerator neutrino interaction final states, and their reconstruction can enhance the oscillation physics sensitivities of LArTPC experiments. 3) BSM signals from accelerator and natural sources also generate diverse signatures in the low-energy range, and reconstruction of these signatures can increase the breadth of BSM scenarios accessible in LArTPC-based searches. 4) Neutrino interaction cross sections and other nuclear physics processes in argon relevant to sub-hundred-MeV LArTPC signatures are poorly understood. Improved theory and experimental measurements are needed. Pion decay-at-rest sources and charged particle and neutron test beams are ideal facilities for experimentally improving this understanding. 5) There are specific calibration needs in the low-energy range, as well as specific needs for control and understanding of radiological and cosmogenic backgrounds. 6) Novel ideas for future LArTPC technology that enhance low-energy capabilities should be explored. These include novel charge enhancement and readout systems, enhanced photon detection, low radioactivity argon, and xenon doping. 7) Low-energy signatures, whether steady-state or part of a supernova burst or larger GeV-scale event topology, have specific triggering, DAQ and reconstruction requirements that must be addressed outside the scope of conventional GeV-scale data collection and analysis pathways.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
Role of surfactant-induced Marangoni stresses in retracting liquid sheets
Authors:
C. R. Constante-Amores,
J. Chergui,
S. Shin,
D. Juric,
J. R. Castrejon-Pita,
A. A. Castrejon-Pita
Abstract:
In this work, we study the effect of insoluble surfactants on the three-dimensional rim-driven retraction dynamics of thin water sheets in air. We employ an interface-tracking/level-set method to ensure the full coupling between the surfactant-induced Marangoni-stresses, interfacial diffusion, and inertia. Our findings are contrasted with the (Newtonian) dynamics of a liquid sheet edge finding tha…
▽ More
In this work, we study the effect of insoluble surfactants on the three-dimensional rim-driven retraction dynamics of thin water sheets in air. We employ an interface-tracking/level-set method to ensure the full coupling between the surfactant-induced Marangoni-stresses, interfacial diffusion, and inertia. Our findings are contrasted with the (Newtonian) dynamics of a liquid sheet edge finding that the surfactant concentration can prevent, or delay, the breakup of the rim. Our simulations use the fastest growing Rayleigh-Plateau instability to drive droplet detachment from the fluid sheet (rim). The results of this work unravel the significant role of Marangoni stresses in the retracting sheet dynamics at large elasticity numbers. We study the sensitivity of the dynamics to the elasticity number and the rigidification of the interface.
△ Less
Submitted 24 May, 2022; v1 submitted 24 February, 2022;
originally announced February 2022.
-
Observation of Variations in Cosmic Ray Single Count Rates During Thunderstorms and Implications for Large-Scale Electric Field Changes
Authors:
R. U. Abbasi,
T. Abu-Zayyad,
M. Allen,
Y. Arai,
R. Arimura,
E. Barcikowski,
J. W. Belz,
D. R. Bergman,
S. A. Blake,
I. Buckland,
R. Cady,
B. G. Cheon,
J. Chiba,
M. Chikawa,
T. Fujii,
K. Fujisue,
K. Fujita,
R. Fujiwara,
M. Fukushima,
R. Fukushima,
G. Furlich,
N. Globus,
R. Gonzalez,
W. Hanlon,
M. Hayashi
, et al. (140 additional authors not shown)
Abstract:
We present the first observation by the Telescope Array Surface Detector (TASD) of the effect of thunderstorms on the development of cosmic ray single count rate intensity over a 700 km$^{2}$ area. Observations of variations in the secondary low-energy cosmic ray counting rate, using the TASD, allow us to study the electric field inside thunderstorms, on a large scale, as it progresses on top of t…
▽ More
We present the first observation by the Telescope Array Surface Detector (TASD) of the effect of thunderstorms on the development of cosmic ray single count rate intensity over a 700 km$^{2}$ area. Observations of variations in the secondary low-energy cosmic ray counting rate, using the TASD, allow us to study the electric field inside thunderstorms, on a large scale, as it progresses on top of the 700 km$^{2}$ detector, without dealing with the limitation of narrow exposure in time and space using balloons and aircraft detectors. In this work, variations in the cosmic ray intensity (single count rate) using the TASD, were studied and found to be on average at the $\sim(0.5-1)\%$ and up to 2\% level. These observations were found to be both in excess and in deficit. They were also found to be correlated with lightning in addition to thunderstorms. These variations lasted for tens of minutes; their footprint on the ground ranged from 6 to 24 km in diameter and moved in the same direction as the thunderstorm. With the use of simple electric field models inside the cloud and between cloud to ground, the observed variations in the cosmic ray single count rate were recreated using CORSIKA simulations. Depending on the electric field model used and the direction of the electric field in that model, the electric field magnitude that reproduces the observed low-energy cosmic ray single count rate variations was found to be approximately between 0.2-0.4 GV. This in turn allows us to get a reasonable insight on the electric field and its effect on cosmic ray air showers inside thunderstorms.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
-
Experiments conducted in the burning plasma regime with inertial fusion implosions
Authors:
J. S. Ross,
J. E. Ralph,
A. B. Zylstra,
A. L. Kritcher,
H. F. Robey,
C. V. Young,
O. A. Hurricane,
D. A. Callahan,
K. L. Baker,
D. T. Casey,
T. Doeppner,
L. Divol,
M. Hohenberger,
S. Le Pape,
A. Pak,
P. K. Patel,
R. Tommasini,
S. J. Ali,
P. A. Amendt,
L. J. Atherton,
B. Bachmann,
D. Bailey,
L. R. Benedetti,
L. Berzak Hopkins,
R. Betti
, et al. (127 additional authors not shown)
Abstract:
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into…
▽ More
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1132 additional authors not shown)
Abstract:
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t…
▽ More
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti,
M. P. Andrews
, et al. (1158 additional authors not shown)
Abstract:
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.…
▽ More
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components.
△ Less
Submitted 23 September, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
The colloidal nature of complex fluids leads to enhanced motility of flagellated bacteria
Authors:
Shashank Kamdar,
Seunghwan Shin,
Lorraine F. Francis,
Xinliang Xu,
Xiang Cheng
Abstract:
The natural habitats of microorganisms in the human microbiome and ocean and soil ecosystems are full of colloids and macromolecules, which impart non-Newtonian flow properties drastically affecting the locomotion of swimming microorganisms. Although the low-Reynolds-number hydrodynamics of the swimming of flagellated bacteria in simple Newtonian fluids has been well developed, our understanding o…
▽ More
The natural habitats of microorganisms in the human microbiome and ocean and soil ecosystems are full of colloids and macromolecules, which impart non-Newtonian flow properties drastically affecting the locomotion of swimming microorganisms. Although the low-Reynolds-number hydrodynamics of the swimming of flagellated bacteria in simple Newtonian fluids has been well developed, our understanding of bacterial motility in complex non-Newtonian fluids is still primitive. Even after six decades of research, fundamental questions about the nature and origin of bacterial motility enhancement in polymer solutions are still under debate. Here, we study the motility of flagellated bacteria in colloidal suspensions of varying sizes and volume fractions. We find that bacteria in dilute colloidal suspensions display quantitatively the same motile behaviors as those in dilute polymer solutions, where a universal particle-size-dependent motility enhancement up to 80% is uncovered, accompanied by strong suppression of bacterial wobbling. By virtue of the well-controlled size and the hard-sphere nature of colloids, the finding not only resolves the long-standing controversy over bacterial motility enhancement in complex fluids but also challenges all the existing theories using polymer dynamics to address the swimming of flagellated bacteria in dilute polymer solutions. We further develop a simple physical model incorporating the colloidal nature of complex fluids, which quantitatively explains bacterial wobbling dynamics and mobility enhancement in both colloidal and polymeric fluids. Our study sheds light on the puzzling motile behaviors of bacteria in complex fluids relevant to a wide range of microbiological processes and provides a cornerstone in engineering bacterial swimming in complex environments.
△ Less
Submitted 31 March, 2022; v1 submitted 29 July, 2021;
originally announced July 2021.
-
Deep Underground Neutrino Experiment (DUNE) Near Detector Conceptual Design Report
Authors:
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
Z. Ahmad,
J. Ahmed,
T. Alion,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. P. Andrews,
F. Andrianala,
S. Andringa,
N. Anfimov,
A. Ankowski,
M. Antonova,
S. Antusch
, et al. (1041 additional authors not shown)
Abstract:
This report describes the conceptual design of the DUNE near detector
This report describes the conceptual design of the DUNE near detector
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Surface detectors of the TAx4 experiment
Authors:
Telescope Array Collaboration,
R. U. Abbasi,
M. Abe,
T. Abu-Zayyad,
M. Allen,
Y. Arai,
E. Barcikowski,
J. W. Belz,
D. R. Bergman,
S. A. Blake,
R. Cady,
B. G. Cheon,
J. Chiba,
M. Chikawa,
T. Fujii,
K. Fujisue,
K. Fujita,
R. Fujiwara,
M. Fukushima,
R. Fukushima,
G. Furlich,
W. Hanlon,
M. Hayashi,
N. Hayashida,
K. Hibino
, et al. (124 additional authors not shown)
Abstract:
Telescope Array (TA) is the largest ultrahigh energy cosmic-ray (UHECR) observatory in the Northern Hemisphere. It explores the origin of UHECRs by measuring their energy spectrum, arrival-direction distribution, and mass composition using a surface detector (SD) array covering approximately 700 km$^2$ and fluorescence detector (FD) stations. TA has found evidence for a cluster of cosmic rays with…
▽ More
Telescope Array (TA) is the largest ultrahigh energy cosmic-ray (UHECR) observatory in the Northern Hemisphere. It explores the origin of UHECRs by measuring their energy spectrum, arrival-direction distribution, and mass composition using a surface detector (SD) array covering approximately 700 km$^2$ and fluorescence detector (FD) stations. TA has found evidence for a cluster of cosmic rays with energies greater than 57 EeV. In order to confirm this evidence with more data, it is necessary to increase the data collection rate.We have begun building an expansion of TA that we call TAx4. In this paper, we explain the motivation, design, technical features, and expected performance of the TAx4 SD. We also present TAx4's current status and examples of the data that have already been collected.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Role of surfactant-induced Marangoni stresses in drop-interface coalescence
Authors:
C. R. Constante-Amores,
A. Batchvarov,
L. Kahouadji,
S. Shin,
J. Chergui,
D. Juric,
O. K. Matar
Abstract:
We study the effect of surfactants on the dynamics of a drop-interface coalescence using full three-dimensional direct numerical simulations. We employ a hybrid interface-tracking/level-set method, which takes into account Marangoni stresses that arise from surface tension gradients, interfacial and bulk diffusion, and sorption kinetic effects. We validate our predictions against the experimental…
▽ More
We study the effect of surfactants on the dynamics of a drop-interface coalescence using full three-dimensional direct numerical simulations. We employ a hybrid interface-tracking/level-set method, which takes into account Marangoni stresses that arise from surface tension gradients, interfacial and bulk diffusion, and sorption kinetic effects. We validate our predictions against the experimental data of Blanchette and Bigioni [Nat. Phys. 2(4):254-257 (2006)] and perform a parametric study that demonstrates the delicate interplay between the flow fields and those associated with the surfactant bulk and interfacial concentrations. The results of this work unravel the crucial role of the Marangoni stresses in the flow physics of coalescence with particular attention paid to their influence on neck reopening dynamics in terms of stagnation-point inhibition, and near-neck vorticity generation. We demonstrate that surfactant-laden cases feature a rigidifying effect on the interface compared to the surfactant-free case, a mechanism that underpins the observed surfactant-induced phenomena.
△ Less
Submitted 16 February, 2021;
originally announced February 2021.
-
3D Fourier transformation light scattering for reconstructing extend angled resolved light scattering of individual particles
Authors:
Khoi Phuong Dao,
Kyeoreh Lee,
Yuri Hong,
Seungwoo Shin,
Sumin Lee,
Dong Soo Hwang,
Yongkeun Park
Abstract:
We represent three-dimensional Fourier transform light scattering, a method to reconstruct angle-resolved light scattering (ARLS) with extended angle-range from individual spherical objects. To overcome the angle limitation determined by the physical numerical aperture of an optical system, the optical light fields scattered from a sample are measured with various illumination angles, and then syn…
▽ More
We represent three-dimensional Fourier transform light scattering, a method to reconstruct angle-resolved light scattering (ARLS) with extended angle-range from individual spherical objects. To overcome the angle limitation determined by the physical numerical aperture of an optical system, the optical light fields scattered from a sample are measured with various illumination angles, and then synthesized onto the Ewald Sphere corresponding to the normal illumination in Fourier space by rotating the scattered light signals. The method extends the angle range of the ARLS spectra beyond 90 degree, beyond the limit of forward optical measurements. Extended scattered light fields in 3D and corresponding ARLS spectra of individual microscopic polystyrene beads, and protein droplets are represented.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Direct numerical simulations of transient turbulent jets: vortex-interface interactions
Authors:
Cristian R. Constante-Amores,
Lyes Kahouadji,
Assen Batchvarov,
Seungwon Shin,
Jalel Chergui,
Damir Juric,
Omar K. Matar
Abstract:
The breakup of an interface into a cascade of droplets and their subsequent coalescence is a generic problem of central importance to a large number of industrial settings such as mixing, separations, and combustion. We study the breakup of a liquid jet introduced through a cylindrical nozzle into a stagnant viscous phase via a hybrid interface-tracking/level-set method to account for the surface…
▽ More
The breakup of an interface into a cascade of droplets and their subsequent coalescence is a generic problem of central importance to a large number of industrial settings such as mixing, separations, and combustion. We study the breakup of a liquid jet introduced through a cylindrical nozzle into a stagnant viscous phase via a hybrid interface-tracking/level-set method to account for the surface tension forces in a three-dimensional Cartesian domain. Numerical solutions are obtained for a range of Reynolds (Re) and Weber (We) numbers. We find that the interplay between the azimuthal and streamwise vorticity components leads to different interfacial features and flow regimes in Re-We space. We show that the streamwise vorticity plays a critical role in the development of the three-dimensional instabilities on the jet surface. In the inertia-controlled regime at high Re and We, we expose the details of the spatio-temporal development of the vortical structures affecting the interfacial dynamics. A mushroom-like structure is formed at the leading edge of the jet inducing the generation of a liquid sheet in its interior that undergoes rupture to form droplets. These droplets rotate inside the mushroom structure due to their interaction with the prevailing vortical structures. Additionally, Kelvin-Helmholtz vortices that form near the injection point deform in the streamwise direction to form hairpin vortices, which, in turn, trigger the formation of interfacial lobes in the jet core. The thinning of the lobes induces the creation of holes which expand to form liquid threads that undergo capillary breakup to form droplets.
△ Less
Submitted 26 May, 2021; v1 submitted 3 December, 2020;
originally announced December 2020.
-
The transition to aeration in two-phase mixing in stirred vessels
Authors:
Lyes Kahouadji,
Assen Batchvarov,
Cristian R. Constante Amores,
Seungwon Shin,
Jalel Chergui,
Damir Juric,
Richard V. Craster,
Omar K. Matar
Abstract:
We consider the mixing of a viscous fluid by the rotation of a pitched blade turbine inside an open, cylindrical tank, with air as the lighter fluid above. To examine the flow and interfacial dynamics, we utilise a highly-parallelised implementation of a hybrid front-tracking/level-set method that employs a domain-decomposition parallelisation strategy. Our numerical technique is designed to captu…
▽ More
We consider the mixing of a viscous fluid by the rotation of a pitched blade turbine inside an open, cylindrical tank, with air as the lighter fluid above. To examine the flow and interfacial dynamics, we utilise a highly-parallelised implementation of a hybrid front-tracking/level-set method that employs a domain-decomposition parallelisation strategy. Our numerical technique is designed to capture faithfully complex interfacial deformation, and changes of topology, including interface rupture and dispersed phase coalescence. As shown via transient, three-dimensional direct numerical simulations, the impeller induces the formation of primary vortices that arise in many idealised rotating flows as well as several secondary vortical structures resembling Kelvin-Helmholtz, vortex breakdown, blade tip vortices, and end-wall corner vortices. As the rotation rate increases, a transition to `aeration' is observed when the interface reaches the rotating blades leading to the entrainment of air bubbles into the viscous fluid and the creation of a bubbly, rotating, free surface flow. The mechanisms underlying the aeration transition are probed as are the routes leading to it, which are shown to exhibit a strong dependence on flow history.
△ Less
Submitted 15 November, 2022; v1 submitted 15 November, 2020;
originally announced November 2020.
-
Observations of the Origin of Downward Terrestrial Gamma-Ray Flashes
Authors:
J. W. Belz,
P. R. Krehbiel,
J. Remington,
M. A. Stanley,
R. U. Abbasi,
R. LeVon,
W. Rison,
D. Rodeheffer,
the Telescope Array Scientific Collaboration,
:,
T. Abu-Zayyad,
M. Allen,
E. Barcikowski,
D. R. Bergman,
S. A. Blake,
M. Byrne,
R. Cady,
B. G. Cheon,
M. Chikawa,
A. di Matteo,
T. Fujii,
K. Fujita,
R. Fujiwara,
M. Fukushima,
G. Furlich
, et al. (116 additional authors not shown)
Abstract:
In this paper we report the first close, high-resolution observations of downward-directed terrestrial gamma-ray flashes (TGFs) detected by the large-area Telescope Array cosmic ray observatory, obtained in conjunction with broadband VHF interferometer and fast electric field change measurements of the parent discharge. The results show that the TGFs occur during strong initial breakdown pulses (I…
▽ More
In this paper we report the first close, high-resolution observations of downward-directed terrestrial gamma-ray flashes (TGFs) detected by the large-area Telescope Array cosmic ray observatory, obtained in conjunction with broadband VHF interferometer and fast electric field change measurements of the parent discharge. The results show that the TGFs occur during strong initial breakdown pulses (IBPs) in the first few milliseconds of negative cloud-to-ground and low-altitude intracloud flashes, and that the IBPs are produced by a newly-identified streamer-based discharge process called fast negative breakdown. The observations indicate the relativistic runaway electron avalanches (RREAs) responsible for producing the TGFs are initiated by embedded spark-like transient conducting events (TCEs) within the fast streamer system, and potentially also by individual fast streamers themselves. The TCEs are inferred to be the cause of impulsive sub-pulses that are characteristic features of classic IBP sferics. Additional development of the avalanches would be facilitated by the enhanced electric field ahead of the advancing front of the fast negative breakdown. In addition to showing the nature of IBPs and their enigmatic sub-pulses, the observations also provide a possible explanation for the unsolved question of how the streamer to leader transition occurs during the initial negative breakdown, namely as a result of strong currents flowing in the final stage of successive IBPs, extending backward through both the IBP itself and the negative streamer breakdown preceding the IBP.
△ Less
Submitted 12 October, 2020; v1 submitted 29 September, 2020;
originally announced September 2020.
-
Strong Exciton-Photon Coupling in Large Area MoSe$_2$ and WSe$_2$ Heterostructures Fabricated from Two-Dimensional Materials Grown by Chemical Vapor Deposition
Authors:
Daniel J. Gillard,
Armando Genco,
Seongjoon Ahn,
Thomas P. Lyons,
Kyung Yeol Ma,
A-Rang Jang,
Toby Severs Millard,
Aurelien A. P. Trichet,
Rahul Jayaprakash,
Kyriacos Georgiou,
David G. Lidzey,
Jason M. Smith,
Hyeon Suk Shin,
Alexander I. Tartakovskii
Abstract:
Two-dimensional semiconducting transition metal dichalcogenides embedded in optical microcavities in the strong exciton-photon coupling regime may lead to promising applications in spin and valley addressable polaritonic logic gates and circuits. One significant obstacle for their realization is the inherent lack of scalability associated with the mechanical exfoliation commonly used for fabricati…
▽ More
Two-dimensional semiconducting transition metal dichalcogenides embedded in optical microcavities in the strong exciton-photon coupling regime may lead to promising applications in spin and valley addressable polaritonic logic gates and circuits. One significant obstacle for their realization is the inherent lack of scalability associated with the mechanical exfoliation commonly used for fabrication of two-dimensional materials and their heterostructures. Chemical vapor deposition offers an alternative scalable fabrication method for both monolayer semiconductors and other two-dimensional materials, such as hexagonal boron nitride. Observation of the strong light-matter coupling in chemical vapor grown transition metal dichalcogenides has been demonstrated so far in a handful of experiments with monolayer molybdenum disulfide and tungsten disulfide. Here we instead demonstrate the strong exciton-photon coupling in microcavities comprising large area transition metal dichalcogenide / hexagonal boron nitride heterostructures made from chemical vapor deposition grown molybdenum diselenide and tungsten diselenide encapsulated on one or both sides in continuous few-layer boron nitride films also grown by chemical vapor deposition. These transition metal dichalcogenide / hexagonal boron nitride heterostructures show high optical quality comparable with mechanically exfoliated samples, allowing operation in the strong coupling regime in a wide range of temperatures down to 4 Kelvin in tunable and monolithic microcavities, and demonstrating the possibility to successfully develop large area transition metal dichalcogenide based polariton devices.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
Supernova Neutrino Burst Detection with the Deep Underground Neutrino Experiment
Authors:
DUNE collaboration,
B. Abi,
R. Acciarri,
M. A. Acero,
G. Adamov,
D. Adams,
M. Adinolfi,
Z. Ahmad,
J. Ahmed,
T. Alion,
S. Alonso Monsalve,
C. Alt,
J. Anderson,
C. Andreopoulos,
M. P. Andrews,
F. Andrianala,
S. Andringa,
A. Ankowski,
M. Antonova,
S. Antusch,
A. Aranda-Fernandez,
A. Ariga,
L. O. Arnold,
M. A. Arroyave,
J. Asaadi
, et al. (949 additional authors not shown)
Abstract:
The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The gen…
▽ More
The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The general capabilities of DUNE for neutrino detection in the relevant few- to few-tens-of-MeV neutrino energy range will be described. As an example, DUNE's ability to constrain the $ν_e$ spectral parameters of the neutrino burst will be considered.
△ Less
Submitted 29 May, 2021; v1 submitted 15 August, 2020;
originally announced August 2020.