-
High voltage DC gun for high intensity polarized electron source
Authors:
Erdong Wang,
Omer Rahman,
John Skaritka,
Wei Liu,
Jyoti Biswas,
Chrisopher Degen,
Patrick Inacker,
Robert Lambiase,
Matthew Paniccia
Abstract:
The high intensity polarized electron source is a critical component for future nuclear physics facilities. The Electron Ion Collider (EIC) requires a polarized electron gun with higher voltage and higher bunch charge compared to any existing polarized electron source. At Brookhaven National Laboratory, we have built an inverted high voltage direct current (HVDC) photoemission gun with a large cat…
▽ More
The high intensity polarized electron source is a critical component for future nuclear physics facilities. The Electron Ion Collider (EIC) requires a polarized electron gun with higher voltage and higher bunch charge compared to any existing polarized electron source. At Brookhaven National Laboratory, we have built an inverted high voltage direct current (HVDC) photoemission gun with a large cathode size. We report on the performances of GaAs photocathodes in a high gradient with up to a 16 nC bunch charge. The measurements were performed at a stable operating gap voltage of 300 kV - demonstrating outstanding lifetime, and robustness. We observed obvious lifetime enhancement by biasing the anode. The gun also integrated a cathode cooling system for potential application on high current electron sources. The various novel features implemented and demonstrated in this polarized HVDC gun open the door towards future high intensity-high average current electron accelerator facilities.
△ Less
Submitted 6 December, 2021;
originally announced December 2021.
-
High brightness CW electron beams from Superconducting RF photoemission gun
Authors:
I. Petrushina,
V. N. Litvinenko,
Y. Jing,
J. Ma,
I. Pinayev,
K. Shih,
G. Wang,
Y. H. Wu,
J. C. Brutus,
Z. Altinbas,
A. Di Lieto,
P. Inacker,
J. Jamilkowski,
G. Mahler,
M. Mapes,
T. Miller,
G. Narayan,
M. Paniccia,
T. Roser,
F. Severino,
J. Skaritka,
L. Smart,
K. Smith,
V. Soria,
Y. Than
, et al. (10 additional authors not shown)
Abstract:
CW photoinjectors operating at high accelerating gradients promise to revolutionize many areas of science and applications. They can establish the basis for a new generation of monochromatic X-ray free electron lasers, high brightness hadron beams, or a new generation of microchip production. In this letter we report on the record-performing superconducting RF electron gun with…
▽ More
CW photoinjectors operating at high accelerating gradients promise to revolutionize many areas of science and applications. They can establish the basis for a new generation of monochromatic X-ray free electron lasers, high brightness hadron beams, or a new generation of microchip production. In this letter we report on the record-performing superconducting RF electron gun with $\textrm{CsK}_{2}\textrm{Sb}$ photocathode. The gun is generating high charge electron bunches (up to 10 nC/bunch) and low transverse emittances, while operating for months with a single photocathode. This achievement opens a new era in generating high-power beams with a very high average brightness.
△ Less
Submitted 16 March, 2020; v1 submitted 12 March, 2020;
originally announced March 2020.
-
Increasing charge lifetime in DC polarized electron guns by offsetting the anode
Authors:
Omer Rahman,
Erdong Wang,
Ilan Ben-Zvi,
Jyoti Biswas,
John Skaritka
Abstract:
Charge lifetime of strained superlattice GaAs photocathodes in DC guns is limited by ion back bombardment. It needs to be improved at least an order of magnitude to meet the requirements for future colliders such as Electron-Ion Collider (EIC). In this work, we propose and present simulation results for an offset anode scheme to increase charge lifetime in DC guns. This scheme eliminates the bomba…
▽ More
Charge lifetime of strained superlattice GaAs photocathodes in DC guns is limited by ion back bombardment. It needs to be improved at least an order of magnitude to meet the requirements for future colliders such as Electron-Ion Collider (EIC). In this work, we propose and present simulation results for an offset anode scheme to increase charge lifetime in DC guns. This scheme eliminates the bombardment of high energy ions on the cathode and enables maximum usage of the available cathode area. Depending on the size of the available cathode area, this method can increase the charge lifetime by an order of magnitude compared to the current best alternative method. An anode assembly capable of in-vacuum movement is required for this method, which has been designed and fabricated at Brookhaven National Laboratory.
△ Less
Submitted 17 April, 2019;
originally announced April 2019.
-
Design and Vertical Tests of SPS-series Double-Quarter Wave (DQW) Cavity Prototypes for the HL-LHC Crab Cavity System
Authors:
S. Verdú-Andrés,
K. Artoos,
S. Belomestnykh,
I. Ben-Zvi,
C. Boulware,
G. Burt,
R. Calaga,
O. Capatina,
F. Carra,
A. Castilla,
W. Clemens,
T. Grimm,
N. Kuder,
R. Leuxe,
Z. Li,
E. A. McEwen,
H. Park,
T. Powers,
A. Ratti,
N. Shipman,
J. Skaritka,
Q. Wu,
B. P. Xiao,
J. Yancey,
C. Zanoni
Abstract:
Crab crossing is essential for high-luminosity colliders. The High Luminosity Large Hadron Collider (HL-LHC) will equip one of its Interaction Points (IP1) with Double-Quarter Wave (DQW) crab cavities. A DQW cavity is a new generation of deflecting RF cavities that stands out for its compactness and broad frequency separation between fundamental and first high-order modes. The deflecting kick is p…
▽ More
Crab crossing is essential for high-luminosity colliders. The High Luminosity Large Hadron Collider (HL-LHC) will equip one of its Interaction Points (IP1) with Double-Quarter Wave (DQW) crab cavities. A DQW cavity is a new generation of deflecting RF cavities that stands out for its compactness and broad frequency separation between fundamental and first high-order modes. The deflecting kick is provided by its fundamental mode. Each HL-LHC DQW cavity shall provide a nominal deflecting voltage of 3.4 MV, although up to 5.0 MV may be required. A Proof-of-Principle (PoP) DQW cavity was limited by quench at 4.6 MV. This paper describes a new, highly optimized cavity, designated DQW SPS-series, which satisfies dimensional, cryogenic, manufacturing and impedance requirements for beam tests at SPS and operation in LHC. Two prototypes of this DQW SPS-series were fabricated by US industry and cold tested after following conventional SRF surface treatment. Both units outperformed the PoP cavity, reaching a deflecting voltage of 5.3-5.9 MV. This voltage - the highest reached by a DQW cavity - is well beyond the nominal voltage of 3.4 MV and may even operate at the ultimate voltage of 5.0MVwith sufficient margin. This paper covers fabrication, surface preparation and cryogenic RF test results and implications.
△ Less
Submitted 21 May, 2018;
originally announced May 2018.
-
Design of a High-bunch-charge 112-MHz Superconducting RF Photoemission Electron Source
Authors:
T. Xin,
J. C. Brutus,
Sergey A. Belomestnykh,
I. Ben-Zvi,
C. H. Boulware,
T. L. Grimm,
T. Hayes,
Vladimir N. Litvinenko,
K. Mernick,
G. Narayan,
P. Orfin,
I. Pinayev,
T. Rao,
F. Severino,
J. Skaritka,
K. Smith,
R. Than,
J. Tuozzolo,
E. Wang,
B. Xiao,
H. Xie,
A. Zaltsman
Abstract:
High-bunch-charge photoemission electron-sources operating in a continuous wave (CW) mode are required for many advanced applications of particle accelerators, such as electron coolers for hadron beams, electron-ion colliders, and free-electron lasers (FELs). Superconducting RF (SRF) has several advantages over other electron-gun technologies in CW mode as it offers higher acceleration rate and po…
▽ More
High-bunch-charge photoemission electron-sources operating in a continuous wave (CW) mode are required for many advanced applications of particle accelerators, such as electron coolers for hadron beams, electron-ion colliders, and free-electron lasers (FELs). Superconducting RF (SRF) has several advantages over other electron-gun technologies in CW mode as it offers higher acceleration rate and potentially can generate higher bunch charges and average beam currents. A 112 MHz SRF electron photoinjector (gun) was developed at Brookhaven National Laboratory (BNL) to produce high-brightness and high-bunch-charge bunches for the Coherent electron Cooling Proof-of-Principle (CeC PoP) experiment. The gun utilizes a quarter-wave resonator (QWR) geometry for assuring beam dynamics, and uses high quantum efficiency (QE) multi-alkali photocathodes for generating electrons.
△ Less
Submitted 27 August, 2016;
originally announced August 2016.
-
High-gradient High-charge CW Superconducting RF gun with CsK2Sb photocathode
Authors:
Igor Pinayev,
Vladimir N. Litvinenko,
Joseph Tuozzolo,
Jean Clifford Brutus,
Sergey Belomestnykh,
Chase Boulware,
Charles Folz,
David Gassner,
Terry Grimm,
Yue Hao,
James Jamilkowski,
Yichao Jing,
Dmitry Kayran,
George Mahler,
Michael Mapes,
Toby Miller,
Geetha Narayan,
Brian Sheehy,
Triveni Rao,
John Skaritka,
Kevin Smith,
Louis Snydstrup,
Yatming Than,
Erdong Wang,
Gang Wang
, et al. (18 additional authors not shown)
Abstract:
High-gradient CW photo-injectors operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray free-electron lasers, super-bright hadron beams, nuclear- waste transmutation or a new generation of microchip production. In this letter we report on our operation of a superconducting RF electron gun w…
▽ More
High-gradient CW photo-injectors operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray free-electron lasers, super-bright hadron beams, nuclear- waste transmutation or a new generation of microchip production. In this letter we report on our operation of a superconducting RF electron gun with a record-high accelerating gradient at the CsK2Sb photocathode (i.e. ~ 20 MV/m) generating a record-high bunch charge (i.e., 3 nC). We briefly describe the system and then detail our experimental results. This achievement opens new era in generating high-power electron beams with a very high brightness.
△ Less
Submitted 17 November, 2015;
originally announced November 2015.
-
Design, prototyping and testing of a compact superconducting double quarter wave crab cavity
Authors:
Binping Xiao,
Luís Alberty,
Sergey Belomestnykh,
Ilan Ben-Zvi,
Rama Calaga,
Chris Cullen,
Ofelia Capatina,
Lee Hammons,
Zenghai Li,
Carlos Marques,
John Skaritka,
Silvia Verdú-Andres,
Qiong Wu
Abstract:
A novel design of superconducting Crab Cavity was proposed and designed at Brookhaven National Laboratory. The new cavity shape is a Double Quarter Wave or DQWCC. After fabrication and surface treatments, the niobium proof-of-principle cavity was cryogenically tested in a vertical cryostat. The cavity is extremely compact yet has a low frequency of 400 MHz, an essential property for service for th…
▽ More
A novel design of superconducting Crab Cavity was proposed and designed at Brookhaven National Laboratory. The new cavity shape is a Double Quarter Wave or DQWCC. After fabrication and surface treatments, the niobium proof-of-principle cavity was cryogenically tested in a vertical cryostat. The cavity is extremely compact yet has a low frequency of 400 MHz, an essential property for service for the Large Hadron Collider luminosity upgrade. The electromagnetic properties of the cavity are also well matched for this demanding task. The demonstrated deflecting voltage of 4.6 MV is well above the requirement for a crab cavity in the future High Luminosity LHC of 3.34 MV. In this paper we present the design, prototyping and test results of the DQWCC.
△ Less
Submitted 13 February, 2015;
originally announced February 2015.
-
eRHIC Design Study: An Electron-Ion Collider at BNL
Authors:
E. C. Aschenauer,
M. D. Baker,
A. Bazilevsky,
K. Boyle,
S. Belomestnykh,
I. Ben-Zvi,
S. Brooks,
C. Brutus,
T. Burton,
S. Fazio,
A. Fedotov,
D. Gassner,
Y. Hao,
Y. Jing,
D. Kayran,
A. Kiselev,
M. A. C. Lamont,
J. -H. Lee,
V. N. Litvinenko,
C. Liu,
T. Ludlam,
G. Mahler,
G. McIntyre,
W. Meng,
F. Meot
, et al. (22 additional authors not shown)
Abstract:
This document presents BNL's plan for an electron-ion collider, eRHIC, a major new research tool that builds on the existing RHIC facility to advance the long-term vision for Nuclear Physics to discover and understand the emergent phenomena of Quantum Chromodynamics (QCD), the fundamental theory of the strong interaction that binds the atomic nucleus. We describe the scientific requirements for su…
▽ More
This document presents BNL's plan for an electron-ion collider, eRHIC, a major new research tool that builds on the existing RHIC facility to advance the long-term vision for Nuclear Physics to discover and understand the emergent phenomena of Quantum Chromodynamics (QCD), the fundamental theory of the strong interaction that binds the atomic nucleus. We describe the scientific requirements for such a facility, following up on the community-wide 2012 white paper, 'Electron-Ion Collider: the Next QCD Frontier', and present a design concept that incorporates new, innovative accelerator techniques to provide a cost-effective upgrade of RHIC with polarized electron beams colliding with the full array of RHIC hadron beams. The new facility will deliver electron-nucleon luminosity of 10^33-10^34 cm-1sec-1 for collisions of 15.9 GeV polarized electrons on either 250 GeV polarized protons or 100 GeV/u heavy ion beams. The facility will also be capable of providing an electron beam energy of 21.2 GeV, at reduced luminosity. We discuss the on-going R&D effort to realize the project, and present key detector requirements and design ideas for an experimental program capable of making the 'golden measurements' called for in the EIC White Paper.
△ Less
Submitted 18 December, 2014; v1 submitted 4 September, 2014;
originally announced September 2014.
-
High-energy high-luminosity electron-ion collider eRHIC
Authors:
Vladimir N. Litvinenko,
Joanne Beebe-Wang,
Sergei Belomestnykh,
Ilan Ben-Zvi,
Michael M. Blaskiewicz,
Rama Calaga,
Xiangyun Chang,
Alexei Fedotov,
David Gassner,
Lee Hammons,
Harald Hahn,
Yue Hao,
Ping He,
William Jackson,
Animesh Jain,
Elliott C. Johnson,
Dmitry Kayran,
Jrg Kewisch,
Yun Luo,
George Mahler,
Gary McIntyre,
Wuzheng Meng,
Michiko Minty,
Brett Parker,
Alexander Pikin
, et al. (17 additional authors not shown)
Abstract:
In this paper, we describe a future electron-ion collider (EIC), based on the existing Relativistic Heavy Ion Collider (RHIC) hadron facility, with two intersecting superconducting rings, each 3.8 km in circumference. A new ERL accelerator, which provide 5-30 GeV electron beam, will ensure 10^33 to 10^34 cm^-2 s^-1 level luminosity.
In this paper, we describe a future electron-ion collider (EIC), based on the existing Relativistic Heavy Ion Collider (RHIC) hadron facility, with two intersecting superconducting rings, each 3.8 km in circumference. A new ERL accelerator, which provide 5-30 GeV electron beam, will ensure 10^33 to 10^34 cm^-2 s^-1 level luminosity.
△ Less
Submitted 13 September, 2011;
originally announced September 2011.
