Showing 1–50 of 100 results for author: Thomas, M

Depth Dependence of Coseismic Off-Fault Damage and its Effects on Rupture Dynamics

Authors: Roxane Ferry, Marion Y. Thomas, Harsha S. Bhat, Pierpaolo Dubernet

Abstract: Faults are complex systems embedded in an evolving medium fractured by seismic ruptures. This off-fault damage zone is shown to be thermo-hydro-mechano-chemically coupled to the main fault plane by a growing number of studies. Yet, off-fault medium is still, for the most part, modelled as a purely elastic -- hence passive -- medium. Using a micromechanical model that accounts for dynamic changes o… ▽ More Faults are complex systems embedded in an evolving medium fractured by seismic ruptures. This off-fault damage zone is shown to be thermo-hydro-mechano-chemically coupled to the main fault plane by a growing number of studies. Yet, off-fault medium is still, for the most part, modelled as a purely elastic -- hence passive -- medium. Using a micromechanical model that accounts for dynamic changes of elastic moduli and inelastic strains related to crack growth, we investigate the depth variation of dynamically triggered off-fault damage and its counter-impact on earthquake slip dynamics. We show that the damage zone, while narrowing with depth, also becomes denser and contrary to prevailing assumptions continues to act as an energy sink, significantly influencing rupture dynamics by stabilizing slip rates. Furthermore, we observe that damage formation markedly reduces rupture velocity and delays, or even prevents, the transition to supershear speeds even for a narrow damage zone. This underscores the critical need to incorporate the complex interplay between the main fault plane and its surrounding medium across the entire seismogenic zone. As a proof of concept, we introduce a 1D spring-slider model that captures bulk elastic variations, by modulating spring stiffness, and normal stress variations that emulate changes in bulk load. This simple model demonstrates the occurrence of slow slip events alongside conventional earthquakes, driven by the dynamic interaction between bulk temporal evolution and fault slip dynamics, without necessitating any changes to frictional properties. △ Less

Submitted 26 June, 2024; originally announced June 2024.

LIGO operates with quantum noise below the Standard Quantum Limit

Authors: Wenxuan Jia, Victoria Xu, Kevin Kuns, Masayuki Nakano, Lisa Barsotti, Matthew Evans, Nergis Mavalvala, Rich Abbott, Ibrahim Abouelfettouh, Rana Adhikari, Alena Ananyeva, Stephen Appert, Koji Arai, Naoki Aritomi, Stuart Aston, Matthew Ball, Stefan Ballmer, David Barker, Beverly Berger, Joseph Betzwieser, Dripta Bhattacharjee, Garilynn Billingsley, Nina Bode, Edgard Bonilla, Vladimir Bossilkov , et al. (146 additional authors not shown)

Abstract: Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Stan… ▽ More Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Standard Quantum Limit (SQL). Reducing quantum noise below the SQL in gravitational-wave detectors, where photons are used to continuously measure the positions of freely falling mirrors, has been an active area of research for decades. Here we show how the LIGO A+ upgrade reduced the detectors' quantum noise below the SQL by up to 3 dBでしべる while achieving a broadband sensitivity improvement, more than two decades after this possibility was first presented. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Report number: LIGO-P2400059

Deep Learning Based Event Reconstruction for Cyclotron Radiation Emission Spectroscopy

Authors: A. Ashtari Esfahani, S. Böser, N. Buzinsky, M. C. Carmona-Benitez, R. Cervantes, C. Claessens, L. de Viveiros, M. Fertl, J. A. Formaggio, J. K. Gaison, L. Gladstone, M. Grando, M. Guigue, J. Hartse, K. M. Heeger, X. Huyan, A. M. Jones, K. Kazkaz, M. Li, A. Lindman, A. Marsteller, C. Matthé, R. Mohiuddin, B. Monreal, E. C. Morrison , et al. (26 additional authors not shown)

Abstract: The objective of the Cyclotron Radiation Emission Spectroscopy (CRES) technology is to build precise particle energy spectra. This is achieved by identifying the start frequencies of charged particle trajectories which, when exposed to an external magnetic field, leave semi-linear profiles (called tracks) in the time-frequency plane. Due to the need for excellent instrumental energy resolution in… ▽ More The objective of the Cyclotron Radiation Emission Spectroscopy (CRES) technology is to build precise particle energy spectra. This is achieved by identifying the start frequencies of charged particle trajectories which, when exposed to an external magnetic field, leave semi-linear profiles (called tracks) in the time-frequency plane. Due to the need for excellent instrumental energy resolution in application, highly efficient and accurate track reconstruction methods are desired. Deep learning convolutional neural networks (CNNs) - particularly suited to deal with information-sparse data and which offer precise foreground localization - may be utilized to extract track properties from measured CRES signals (called events) with relative computational ease. In this work, we develop a novel machine learning based model which operates a CNN and a support vector machine in tandem to perform this reconstruction. A primary application of our method is shown on simulated CRES signals which mimic those of the Project 8 experiment - a novel effort to extract the unknown absolute neutrino mass value from a precise measurement of tritium $βべーた^-$-decay energy spectrum. When compared to a point-clustering based technique used as a baseline, we show a relative gain of 24.1% in event reconstruction efficiency and comparable performance in accuracy of track parameter reconstruction. △ Less

Submitted 5 January, 2024; originally announced February 2024.

Comments: submitted to Machine Learning: Science and Technology

Journal ref: Machine Learning: Science and Technology, 5 (2024) 025026

Detection of the infrared aurora at Uranus with Keck-NIRSPEC

Authors: Emma M. Thomas, Henrik Melin, Tom S. Stallard, Mohammad N. Chowdhury, Ruoyan Wang, Katie Knowles, Steve Miller

Abstract: Near infrared (NIR) wavelength observations of Uranus have been unable to locate any infrared aurorae, despite many attempts to do so since the 1990s. While at Jupiter and Saturn, NIR investigations have redefined our understanding of magnetosphere ionosphere thermosphere coupling, the lack of NIR auroral detection at Uranus means that we have lacked a window through which to study these processes… ▽ More Near infrared (NIR) wavelength observations of Uranus have been unable to locate any infrared aurorae, despite many attempts to do so since the 1990s. While at Jupiter and Saturn, NIR investigations have redefined our understanding of magnetosphere ionosphere thermosphere coupling, the lack of NIR auroral detection at Uranus means that we have lacked a window through which to study these processes at Uranus. Here we present NIR Uranian observations with the Keck II telescope taken on the 5 September 2006 and detect enhanced $\text{H}_{\text{3}}^{\text{+}}$ emissions. Analysing temperatures and column densities, we identify an 88\% increase in localized $\text{H}_{\text{3}}^{\text{+}}$ column density, with no significant temperature increases, consistent with auroral activity generating increased ionization. By comparing these structures against the $\text{Q}_{\text{3}}^{\text{mp}}$ magnetic field model and the Voyager 2 ultraviolet observations, we suggest that these regions make up sections of the northern aurora. △ Less

Submitted 10 November, 2023; originally announced November 2023.

Comments: 12 pages, 3 main figures, 2 extended data figures. Nat Astron (2023)

Two-Stage Cryogenic HEMT Based Amplifier For Low Temperature Detectors

Authors: J. Anczarski, M. Dubovskov, C. W. Fink, S. Kevane, N. A. Kurinsky, A. Mazumdar, S. J. Meijer, A. Phipps, F. Ronning, I. Rydstrom, A. Simchony, Z. Smith, S. M. Thomas, S. L. Watkins, B. A. Young

Abstract: To search for dark matter candidates with masses below $\mathcal{O}$(MeV), the SPLENDOR (Search for Particles of Light dark mattEr with Narrow-gap semiconDuctORs) experiment is developing novel narrow-bandgap semiconductors with electronic bandgaps on the order of 1-100 meV. In order to detect the charge signal produced by scattering or absorption events, SPLENDOR has designed a two-stage cryogeni… ▽ More To search for dark matter candidates with masses below $\mathcal{O}$(MeV), the SPLENDOR (Search for Particles of Light dark mattEr with Narrow-gap semiconDuctORs) experiment is developing novel narrow-bandgap semiconductors with electronic bandgaps on the order of 1-100 meV. In order to detect the charge signal produced by scattering or absorption events, SPLENDOR has designed a two-stage cryogenic HEMT-based amplifier with an estimated charge resolution approaching the single-electron level. A low-capacitance ($\sim$1.6 pF) HEMT is used as a buffer stage at $T=10\,\mathrm{mK}$ to mitigate effects of stray capacitance at the input. The buffered signal is then amplified by a higher-capacitance ($\sim$200 pF) HEMT amplifier stage at $T=4\,\mathrm{K}$. Importantly, the design of this amplifier makes it usable with any insulating material - allowing for rapid prototyping of a variety of novel detector materials. We present the two-stage cryogenic amplifier design, preliminary voltage noise performance, and estimated charge resolution of 7.2 electrons. △ Less

Submitted 26 January, 2024; v1 submitted 3 November, 2023; originally announced November 2023.

Comments: 4 pages, 3 figures, 1 table, conference proceedings for LTD20

Report number: LA-UR-24-20758

Journal ref: J. Low Temp. Phys. 214, 256 (2024)

Preserved Edge Convolutional Neural Network for Sensitivity Enhancement of Deuterium Metabolic Imaging (DMI)

Authors: Siyuan Dong, Henk M. De Feyter, Monique A. Thomas, Robin A. de Graaf, James S. Duncan

Abstract: Purpose: Common to most MRSI techniques, the spatial resolution and the minimal scan duration of Deuterium Metabolic Imaging (DMI) are limited by the achievable SNR. This work presents a deep learning method for sensitivity enhancement of DMI. Methods: A convolutional neural network (CNN) was designed to estimate the 2H-labeled metabolite concentrations from low SNR and distorted DMI FIDs. The C… ▽ More Purpose: Common to most MRSI techniques, the spatial resolution and the minimal scan duration of Deuterium Metabolic Imaging (DMI) are limited by the achievable SNR. This work presents a deep learning method for sensitivity enhancement of DMI. Methods: A convolutional neural network (CNN) was designed to estimate the 2H-labeled metabolite concentrations from low SNR and distorted DMI FIDs. The CNN was trained with synthetic data that represent a range of SNR levels typically encountered in vivo. The estimation precision was further improved by fine-tuning the CNN with MRI-based edge-preserving regularization for each DMI dataset. The proposed processing method, PReserved Edge ConvolutIonal neural network for Sensitivity Enhanced DMI (PRECISE-DMI), was applied to simulation studies and in vivo experiments to evaluate the anticipated improvements in SNR and investigate the potential for inaccuracies. Results: PRECISE-DMI visually improved the metabolic maps of low SNR datasets, and quantitatively provided higher precision than the standard Fourier reconstruction. Processing of DMI data acquired in rat brain tumor models resulted in more precise determination of 2H-labeled lactate and glutamate + glutamine levels, at increased spatial resolution (from >8 to 2 $μみゅー$L) or shortened scan time (from 32 to 4 min) compared to standard acquisitions. However, rigorous SD-bias analyses showed that overuse of the edge-preserving regularization can compromise the accuracy of the results. Conclusion: PRECISE-DMI allows a flexible trade-off between enhancing the sensitivity of DMI and minimizing the inaccuracies. With typical settings, the DMI sensitivity can be improved by 3-fold while retaining the capability to detect local signal variations. △ Less

Submitted 13 September, 2023; v1 submitted 7 September, 2023; originally announced September 2023.

A plate-type condenser platform with engineered wettability for space applications

Authors: Tibin M Thomas, Pallab Sinha Mahapatra

Abstract: Vapor condensation is extensively used in applications that demand the exchange of a substantial amount of heat energy or the vapor-liquid phase conversion. In conventional condensers, the condensate removal from a subcooled surface is caused by gravity force. This restricts the use of such condensers in space applications or in horizontal orientations. The current study demonstrates proof-of-conc… ▽ More Vapor condensation is extensively used in applications that demand the exchange of a substantial amount of heat energy or the vapor-liquid phase conversion. In conventional condensers, the condensate removal from a subcooled surface is caused by gravity force. This restricts the use of such condensers in space applications or in horizontal orientations. The current study demonstrates proof-of-concept of a novel plate-type condenser platform for passively removing condensate from a horizontally oriented surface to the surrounded wicking reservoir without gravity. The condensing surface is engineered with patterned wettabilities, which enables the continuous migration of condensate from the inner region of the condenser surface to the side edges via surface energy gradient. The surrounding wicking reservoir facilitates the continuous absorption of condensate from the side edges. The condensation dynamics on different substrates with patterned wettabilities are investigated, and their condensation heat transfer performance is compared. The continuous migration of condensate drops from a superhydrophobic to a superhydrophilic area can rejuvenate the nucleation sites in the superhydrophobic area, resulting in increased heat transport. We can use the condenser design with engineered wettability mentioned above for temperature and humidity management applications in space. △ Less

Submitted 30 May, 2023; originally announced May 2023.

A quality assurance framework for real-time monitoring of deep learning segmentation models in radiotherapy

Authors: Xiyao Jin, Yao Hao, Jessica Hilliard, Zhehao Zhang, Maria A. Thomas, Hua Li, Abhinav K. Jha, Geoffrey D. Hugo

Abstract: To safely deploy deep learning models in the clinic, a quality assurance framework is needed for routine or continuous monitoring of input-domain shift and the models' performance without ground truth contours. In this work, cardiac substructure segmentation was used as an example task to establish a QA framework. A benchmark dataset consisting of Computed Tomography (CT) images along with manual… ▽ More To safely deploy deep learning models in the clinic, a quality assurance framework is needed for routine or continuous monitoring of input-domain shift and the models' performance without ground truth contours. In this work, cardiac substructure segmentation was used as an example task to establish a QA framework. A benchmark dataset consisting of Computed Tomography (CT) images along with manual cardiac delineations of 241 patients were collected, including one 'common' image domain and five 'uncommon' domains. Segmentation models were tested on the benchmark dataset for an initial evaluation of model capacity and limitations. An image domain shift detector was developed by utilizing a trained Denoising autoencoder (DAE) and two hand-engineered features. Another Variational Autoencoder (VAE) was also trained to estimate the shape quality of the auto-segmentation results. Using the extracted features from the image/segmentation pair as inputs, a regression model was trained to predict the per-patient segmentation accuracy, measured by Dice coefficient similarity (DSC). The framework was tested across 19 segmentation models to evaluate the generalizability of the entire framework. As results, the predicted DSC of regression models achieved a mean absolute error (MAE) ranging from 0.036 to 0.046 with an averaged MAE of 0.041. When tested on the benchmark dataset, the performances of all segmentation models were not significantly affected by scanning parameters: FOV, slice thickness and reconstructions kernels. For input images with Poisson noise, CNN-based segmentation models demonstrated a decreased DSC ranging from 0.07 to 0.41, while the transformer-based model was not significantly affected. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Inferring the past: a combined CNN-LSTM deep learning framework to fuse satellites for historical inundation mapping

Authors: Jonathan Giezendanner, Rohit Mukherjee, Matthew Purri, Mitchell Thomas, Max Mauerman, A. K. M. Saiful Islam, Beth Tellman

Abstract: Mapping floods using satellite data is crucial for managing and mitigating flood risks. Satellite imagery enables rapid and accurate analysis of large areas, providing critical information for emergency response and disaster management. Historical flood data derived from satellite imagery can inform long-term planning, risk management strategies, and insurance-related decisions. The Sentinel-1 sat… ▽ More Mapping floods using satellite data is crucial for managing and mitigating flood risks. Satellite imagery enables rapid and accurate analysis of large areas, providing critical information for emergency response and disaster management. Historical flood data derived from satellite imagery can inform long-term planning, risk management strategies, and insurance-related decisions. The Sentinel-1 satellite is effective for flood detection, but for longer time series, other satellites such as MODIS can be used in combination with deep learning models to accurately identify and map past flood events. We here develop a combined CNN--LSTM deep learning framework to fuse Sentinel-1 derived fractional flooded area with MODIS data in order to infer historical floods over Bangladesh. The results show how our framework outperforms a CNN-only approach and takes advantage of not only space, but also time in order to predict the fractional inundated area. The model is applied to historical MODIS data to infer the past 20 years of inundation extents over Bangladesh and compared to a thresholding algorithm and a physical model. Our fusion model outperforms both models in consistency and capacity to predict peak inundation extents. △ Less

Submitted 30 April, 2023; originally announced May 2023.

Comments: CVPR 2023: Earthvision Workshop

Friction Laws and Numerical Modeling of the Seismic Cycle

Authors: M. Y. Thomas, H. S. Bhat

Abstract: Earthquakes rank among the most destructive manifestations of the Earth's dynamics. Can they be predicted? This is often the first question students ask. To answer that right away: no, at present it is not possible to anticipate the date, site and magnitude of future seismic events. However, there does exist a general framework to describe observations related to earthquakes and understand the pro… ▽ More Earthquakes rank among the most destructive manifestations of the Earth's dynamics. Can they be predicted? This is often the first question students ask. To answer that right away: no, at present it is not possible to anticipate the date, site and magnitude of future seismic events. However, there does exist a general framework to describe observations related to earthquakes and understand the processes that lead to their occurrence: the seismic cycle. This chapter introduces the reader to the friction laws from a historical to state of the art perspective. It then deals with mechanical modelling of the seismic cycle through simple analog models and finally presents some open questions and directions for future research. △ Less

Submitted 3 January, 2023; originally announced January 2023.

On the importance of 3D stress state in 2D earthquake rupture simulations with off-fault deformation

Authors: Louise Jeandet Ribes, Marion Y. Thomas, Harsha S. Bhat

Abstract: During the last decades, many numerical models have been developed to investigate the conditions for seismic and aseismic slip. Those models explore the behavior of frictional faults, embedded in either elastic or inelastic media, and submitted to a far field loading (seismic cycle models), or initial stresses (single dynamic rupture models). Those initial conditions impact both on-fault and off-f… ▽ More During the last decades, many numerical models have been developed to investigate the conditions for seismic and aseismic slip. Those models explore the behavior of frictional faults, embedded in either elastic or inelastic media, and submitted to a far field loading (seismic cycle models), or initial stresses (single dynamic rupture models). Those initial conditions impact both on-fault and off-fault dynamics. Because of the sparsity of direct measurements of fault stresses, modelers have to make assumptions about these initial conditions. To this day, Anderson's theory is the only framework that can be used to link fault generation and reactivation to the three-dimensional stress field. In this work we look at the role of the three dimensional stress field in modelling a 2D strike-slip fault under plane-strain conditions. We show that setting up an incorrect initial stress field, based on Anderson's theory, can lead to underestimation of the damage zone width by up to a factor of six, for the studied cases. Moreover, because of the interactions between fault slip and off-fault deformation, initial stress field influences the rupture propagation. Our study emphasizes the need to set up the correct initial 3D stress field, even in 2D numerical simulations. △ Less

Submitted 18 October, 2023; v1 submitted 24 December, 2022; originally announced December 2022.

SYNCA: A Synthetic Cyclotron Antenna for the Project 8 Collaboration

Authors: A. Ashtari Esfahani, S. Böser, N. Buzinsky, M. C. Carmona-Benitez, C. Claessens, L. de Viveiros, M. Fertl, J. A. Formaggio, L. Gladstone, M. Grando, J. Hartse, K. M. Heeger, X. Huyan, A. M. Jones, K. Kazkaz, M. Li, A. Lindman, C. Matthé, R. Mohiuddin, B. Monreal, R. Mueller, J. A. Nikkel, E. Novitski, N. S. Oblath, J. I. Peña , et al. (20 additional authors not shown)

Abstract: Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for measuring the kinetic energy of charged particles through a precision measurement of the frequency of the cyclotron radiation generated by the particle's motion in a magnetic field. The Project 8 collaboration is developing a next-generation neutrino mass measurement experiment based on CRES. One approach is to use a phased antenn… ▽ More Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for measuring the kinetic energy of charged particles through a precision measurement of the frequency of the cyclotron radiation generated by the particle's motion in a magnetic field. The Project 8 collaboration is developing a next-generation neutrino mass measurement experiment based on CRES. One approach is to use a phased antenna array, which surrounds a volume of tritium gas, to detect and measure the cyclotron radiation of the resulting $βべーた$-decay electrons. To validate the feasibility of this method, Project 8 has designed a test stand to benchmark the performance of an antenna array at reconstructing signals that mimic those of genuine CRES events. To generate synthetic CRES events, a novel probe antenna has been developed, which emits radiation with characteristics similar to the cyclotron radiation produced by charged particles in magnetic fields. This paper outlines the design, construction, and characterization of this Synthetic Cyclotron Antenna (SYNCA). Furthermore, we perform a series of measurements that use the SYNCA to test the position reconstruction capabilities of the digital beamforming reconstruction technique. We find that the SYNCA produces radiation with characteristics closely matching those expected for cyclotron radiation and reproduces experimentally the phenomenology of digital beamforming simulations of true CRES signals. △ Less

Submitted 15 December, 2022; originally announced December 2022.

Atmospheric water vapor condensation on engineered interfaces: Busting the myths

Authors: Tibin M. Thomas, Pallab Sinha Mahapatra, Ranjan Ganguly, Manish K. Tiwari

Abstract: Condensing atmospheric water vapor on surfaces is a sustainable approach to potentially address the potable water crisis. However, despite extensive research, a key question remains: what is the physical mechanism governing the condensation from humid air and how significantly does it differ from pure steam condensation? The answer may help define an optimal combination of the mode and mechanism o… ▽ More Condensing atmospheric water vapor on surfaces is a sustainable approach to potentially address the potable water crisis. However, despite extensive research, a key question remains: what is the physical mechanism governing the condensation from humid air and how significantly does it differ from pure steam condensation? The answer may help define an optimal combination of the mode and mechanism of condensation as well as the surface wettability for best possible water harvesting efficacy. Here we show that this lack of clarity is due to the differences in heat transfer characteristics during condensation from pure vapor and humid air environments. Specifically, during condensation from humid air, the thermal resistance across the condensate is non-dominant and the energy transfer is controlled by vapor diffusion and condensate drainage. This leads to filmwise condensation on superhydrophilic surfaces, offering the highest water collection efficiency. To demonstrate this, we measured condensation rate on different sets of superhydrophilic and superhydrophobic surfaces in a wide degree of subcooling (10 - 26 C) and humidity-ratio differences (5 - 45 g/kg of dry air). The resulting condensation rate is enhanced by 57 - 333 % on the superhydrophilic surfaces as compared to the superhydrophobic ones. The findings of this study challenges the nearly century-old scientific ambiguity about the mechanism of vapor condensation from humid air. Our findings will lead to the design of efficient atmospheric water harvesting systems. △ Less

Submitted 21 March, 2023; v1 submitted 15 October, 2022; originally announced October 2022.

Machine learning in the study of phase transition of two-dimensional complex plasmas

Authors: He Huang, Vladimir Nosenko, Han-Xiao Huang-Fu, Hubertus M. Thomas, Cheng-Ran Du

Abstract: Machine learning is applied to investigate the phase transition of two-dimensional complex plasmas. The Langevin dynamics simulation is employed to prepare particle suspensions in various thermodynamic states. Based on the resulted particle positions in two extreme conditions, bitmap images are synthesized and imported to a convolutional neural network (ConvNet) as training sample. As a result, a… ▽ More Machine learning is applied to investigate the phase transition of two-dimensional complex plasmas. The Langevin dynamics simulation is employed to prepare particle suspensions in various thermodynamic states. Based on the resulted particle positions in two extreme conditions, bitmap images are synthesized and imported to a convolutional neural network (ConvNet) as training sample. As a result, a phase diagram is obtained. This trained ConvNet model can be directly applied to the sequence of the recorded images using video microscopy in the experiments to study the melting. △ Less

Submitted 27 April, 2022; originally announced April 2022.

The Project 8 Neutrino Mass Experiment

Authors: Project 8 Collaboration, A. Ashtari Esfahani, S. Böser, N. Buzinsky, M. C. Carmona-Benitez, C. Claessens, L. de Viveiros, P. J. Doe, S. Enomoto, M. Fertl, J. A. Formaggio, J. K. Gaison, M. Grando, K. M. Heeger, X. Huyan, A. M. Jones, K. Kazkaz, M. Li, A. Lindman, C. Matthé, R. Mohiuddin, B. Monreal, R. Mueller, J. A. Nikkel, E. Novitski , et al. (23 additional authors not shown)

Abstract: Measurements of the $βべーた^-$ spectrum of tritium give the most precise direct limits on neutrino mass. Project 8 will investigate neutrino mass using Cyclotron Radiation Emission Spectroscopy (CRES) with an atomic tritium source. CRES is a new experimental technique that has the potential to surmount the systematic and statistical limitations of current-generation direct measurement methods. Atomic t… ▽ More Measurements of the $βべーた^-$ spectrum of tritium give the most precise direct limits on neutrino mass. Project 8 will investigate neutrino mass using Cyclotron Radiation Emission Spectroscopy (CRES) with an atomic tritium source. CRES is a new experimental technique that has the potential to surmount the systematic and statistical limitations of current-generation direct measurement methods. Atomic tritium avoids an irreducible systematic uncertainty associated with the final states populated by the decay of molecular tritium. Project 8 will proceed in a phased approach toward a goal of 40 meV/c$^2$ neutrino-mass sensitivity. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Viterbi Decoding of CRES Signals in Project 8

Authors: A. Ashtari Esfahani, Z. Bogorad, S. Böser, N. Buzinsky, C. Claessens, L. de Viveiros, M. Fertl, J. A. Formaggio, L. Gladstone, M. Grando, M. Guigue, J. Hartse, K. M. Heeger, X. Huyan, J. Johnston, A. M. Jones, K. Kazkaz, B. H. LaRoque, M. Li, A. Lindman, C. Matthé, R. Mohiuddin, B. Monreal, J. A. Nikkel, E. Novitski , et al. (23 additional authors not shown)

Abstract: Cyclotron Radiation Emission Spectroscopy (CRES) is a modern approach for determining charged particle energies via high-precision frequency measurements of the emitted cyclotron radiation. For CRES experiments with gas within the fiducial volume, signal and noise dynamics can be modelled by a hidden Markov model. We introduce a novel application of the Viterbi algorithm in order to derive informa… ▽ More Cyclotron Radiation Emission Spectroscopy (CRES) is a modern approach for determining charged particle energies via high-precision frequency measurements of the emitted cyclotron radiation. For CRES experiments with gas within the fiducial volume, signal and noise dynamics can be modelled by a hidden Markov model. We introduce a novel application of the Viterbi algorithm in order to derive informational limits on the optimal detection of cyclotron radiation signals in this class of gas-filled CRES experiments, thereby providing concrete limits from which future reconstruction algorithms, as well as detector designs, can be constrained. The validity of the resultant decision rules is confirmed using both Monte Carlo and Project 8 data. △ Less

Submitted 31 May, 2022; v1 submitted 7 December, 2021; originally announced December 2021.

Comments: 13 pages, 5 figures

Journal ref: New J. Phys. 24, 053013 (2022)

Influence of Temporal Variations in Plasma Conditions on the Electric Potential Near Self-Organized Dust Chains

Authors: Katrina Vermillion, Dustin L. Sanford, Lorin S. Matthews, Peter Hartmann, Marlene Rosenberg, Evdokiya Kostadinova, Jorge Carmona-Reyes, Truell Hyde, Andrey M. Lipaev, Alexandr D. Usachev, Andrey V. Zobnin, Oleg F. Petrov, Markus H. Thoma, Mikhail Y. Pustilnik, Hubertus M. Thomas, Alexey Ovchinin

Abstract: The self-organization of dust grains into stable filamentary dust structures (or "chains") largely depends on dynamic interactions between the individual charged dust grains and the complex electric potential arising from the distribution of charges within the local plasma environment. Recent studies have shown that the positive column of the gas discharge plasma in the Plasmakristall-4 (PK-4) exp… ▽ More The self-organization of dust grains into stable filamentary dust structures (or "chains") largely depends on dynamic interactions between the individual charged dust grains and the complex electric potential arising from the distribution of charges within the local plasma environment. Recent studies have shown that the positive column of the gas discharge plasma in the Plasmakristall-4 (PK-4) experiment onboard the International Space Station (ISS) supports the presence of fast-moving ionization waves, which lead to variations of plasma parameters by up to an order of magnitude from the average background values. The highly-variable environment resulting from ionization waves may have interesting implications for the dynamics and self-organization of dust particles, particularly concerning the formation and stability of dust chains. Here we investigate the electric potential surrounding dust chains in the PK-4 by employing a molecular dynamics model of the dust and ions with boundary conditions supplied by a Particle-in-Cell with Monte Carlo collisions (PIC-MCC) simulation of the ionization waves. The model is used to examine the effects of the plasma conditions within different regions of the ionization wave and compare the resulting dust structure to that obtained by employing the time-averaged plasma conditions. Comparison between simulated dust chains and experimental data from the PK-4 shows that the time-averaged plasma conditions do not accurately reproduce observed results for dust behavior, indicating that more careful treatment of plasma conditions in the presence of ionization waves is required. It is further shown that commonly used analytic forms of the electric potential do not accurately describe the electric potential near charged dust grains under these plasma conditions. △ Less

Submitted 2 March, 2022; v1 submitted 30 October, 2021; originally announced November 2021.

Comments: 15 pages, 14 figures

Journal ref: Physics of Plasmas Volume 29, Issue 2, 023701 (2022)

Point Absorber Limits to Future Gravitational-Wave Detectors

Authors: W. Jia, H. Yamamoto, K. Kuns, A. Effler, M. Evans, P. Fritschel, R. Abbott, C. Adams, R. X. Adhikari, A. Ananyeva, S. Appert, K. Arai, J. S. Areeda, Y. Asali, S. M. Aston, C. Austin, A. M. Baer, M. Ball, S. W. Ballmer, S. Banagiri, D. Barker, L. Barsotti, J. Bartlett, B. K. Berger, J. Betzwieser , et al. (176 additional authors not shown)

Abstract: High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some hig… ▽ More High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some high-power cavity experiments, for example, the Advanced LIGO gravitational wave detector. In this Letter, we present a general approach to the point absorber effect from first principles and simulate its contribution to the increased scattering. The achievable circulating power in current and future gravitational-wave detectors is calculated statistically given different point absorber configurations. Our formulation is further confirmed experimentally in comparison with the scattered power in the arm cavity of Advanced LIGO measured by in-situ photodiodes. The understanding presented here provides an important tool in the global effort to design future gravitational wave detectors that support high optical power, and thus reduce quantum noise. △ Less

Submitted 17 September, 2021; originally announced September 2021.

Comments: 7 pages, 3 figures

Report number: LIGO-P2100331

Heat transport in a flowing complex plasma in microgravity conditions

Authors: V. Nosenko, S. Zhdanov, M. Pustylnik, H. M. Thomas, A. M. Lipaev, O. V. Novitskii

Abstract: Heat transport in a three-dimensional complex (dusty) plasma was experimentally studied in microgravity conditions using Plasmakristall-4 (PK-4) instrument on board the International Space Station (ISS). An extended suspension of microparticles was locally heated by a shear flow created by applying the radiation pressure force of the manipulation-laser beam. Individual particle trajectories in the… ▽ More Heat transport in a three-dimensional complex (dusty) plasma was experimentally studied in microgravity conditions using Plasmakristall-4 (PK-4) instrument on board the International Space Station (ISS). An extended suspension of microparticles was locally heated by a shear flow created by applying the radiation pressure force of the manipulation-laser beam. Individual particle trajectories in the flow were analysed and from these, using a fluid heat transport equation that takes viscous heating and neutral gas drag into account, the complex plasma's thermal diffusivity and kinematic viscosity were calculated. Their values are compared with previous results reported in ground-based experiments with complex plasmas. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Comments: This article has been submitted to Physics of Plasmas. After it is published, it will be found at https://publishing.aip.org/resources/librarians/products/journals/

Effect of ionization waves on dust chain formation in a DC discharge

Authors: L. S. Matthews, K. Vermillion, P. Hartmann, M. Rosenberg, S. Rostami, E. G. Kostadinova, T. W. Hyde, M. Y. Pustylnik, A. M. Lipaev, A. D. Usachev, A. V. Zobnin, M. H. Thoma, O. Petrov, H. M. Thomas, O. V. Novitskii

Abstract: An interesting aspect of complex plasma is its ability to self-organize into a variety of structural configurations and undergo transitions between these states. A striking phenomenon is the isotropic-to-string transition observed in electrorheological complex plasma under the influence of a symmetric ion wakefield. Such transitions have been investigated using the Plasma Kristall-4 (PK-4) microgr… ▽ More An interesting aspect of complex plasma is its ability to self-organize into a variety of structural configurations and undergo transitions between these states. A striking phenomenon is the isotropic-to-string transition observed in electrorheological complex plasma under the influence of a symmetric ion wakefield. Such transitions have been investigated using the Plasma Kristall-4 (PK-4) microgravity laboratory on the International Space Station (ISS). Recent experiments and numerical simulations have shown that, under PK-4 relevant discharge conditions, the seemingly homogeneous DC discharge column is highly inhomogeneous, with large axial electric field oscillations associated with ionization waves occurring on microsecond time scales. A multi-scale numerical model of the dust-plasma interactions is employed to investigate the role of the electric field on the charge of individual dust grains, the ion wakefield, and the order of string-like structures. Results are compared to dust strings formed in similar conditions in the PK-4 experiment. △ Less

Submitted 21 July, 2021; originally announced July 2021.

Comments: 18 pages, 11 figures

A mutually beneficial approach to electricity network pricing in the presence of large amounts of solar power and community-scale energy storage

Authors: B. C. P. Sturmberg, M. E. Shaw, C. P. Mediwaththe, H. Ransan-Cooper, B. Weise, M. Thomas, L. Blackhall

Abstract: Electricity distribution networks that contain large photovoltaic solar systems can experience power flows between customers. These may create both technical and socio-economic challenges. This paper establishes how these challenges can be addressed through the combined deployment of Community-scale Energy Storage (CES) and local network tariffs. Our study simulates the operation of a CES under a… ▽ More Electricity distribution networks that contain large photovoltaic solar systems can experience power flows between customers. These may create both technical and socio-economic challenges. This paper establishes how these challenges can be addressed through the combined deployment of Community-scale Energy Storage (CES) and local network tariffs. Our study simulates the operation of a CES under a range of local network tariff models, using current Australian electricity prices and current network prices as a reference. We assess the financial outcomes for solar and non-solar owning customers and the distribution network operator. We find that tariff settings exist that create mutual benefits for all stakeholders. Such tariffs all apply a discount of greater than 50\% to energy flows within the local network, relative to regular distribution network tariffs. The policy implication of these findings is that the, historically contentious, issue of network tariff reform in the presence of local solar power generation can be resolved with a mutually beneficial arrangement of local network tariffs and CES. Furthermore, the challenge of setting appropriate tariffs is eased through clear and intuitive conditions on local network tariff pricing. △ Less

Submitted 5 September, 2021; v1 submitted 10 June, 2021; originally announced July 2021.

LIGOs Quantum Response to Squeezed States

Authors: L. McCuller, S. E. Dwyer, A. C. Green, Haocun Yu, L. Barsotti, C. D. Blair, D. D. Brown, A. Effler, M. Evans, A. Fernandez-Galiana, P. Fritschel, V. V. Frolov, N. Kijbunchoo, G. L. Mansell, F. Matichard, N. Mavalvala, D. E. McClelland, T. McRae, A. Mullavey, D. Sigg, B. J. J. Slagmolen, M. Tse, T. Vo, R. L. Ward, C. Whittle , et al. (172 additional authors not shown)

Abstract: Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to furth… ▽ More Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to further expand our gravitational view of the universe. Further reducing quantum noise will require both lowering decoherence from losses as well more sophisticated manipulations to counter the quantum back-action from radiation pressure. Both tasks require fully understanding the physical interactions between squeezed light and the many components of km-scale interferometers. To this end, data from both LIGO observatories in observing run three are expressed using frequency-dependent metrics to analyze each detector's quantum response to squeezed states. The response metrics are derived and used to concisely describe physical mechanisms behind squeezing's simultaneous interaction with transverse-mode selective optical cavities and the quantum radiation pressure noise of suspended mirrors. These metrics and related analysis are broadly applicable for cavity-enhanced optomechanics experiments that incorporate external squeezing, and -- for the first time -- give physical descriptions of every feature so far observed in the quantum noise of the LIGO detectors. △ Less

Submitted 25 May, 2021; originally announced May 2021.

Comments: 24 pages, 5 figures

Report number: P2100050

Journal ref: Phys. Rev. D 104, 062006 (2021)

Evaluation of silicon carbide as a divertor armor material in DIII-D H-mode discharges

Authors: T. Abrams, S. Bringuier, D. M. Thomas, G. Sinclair, S. Gonderman, L. Holland, D. L. Rudakov, R. S. Wilcox, E. A. Unterberg, F. Scotti

Abstract: Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bo… ▽ More Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bombardment due to more efficient physical and chemical sputtering of C relative to Si. Silicon erosion from SiC thereby occurs primarily from sputtering of the enriched Si layer, rather than directly from the SiC itself. SiC coatings on ATJ graphite, manufactured via chemical vapor deposition, were exposed to repeated H-mode plasma discharges in the DIII-D tokamak to test this model. The qualitative trends from analytic modeling are reproduced by the experimental measurements, obtained via spectroscopic inference using the S/XB method. Quantitatively the model slightly under-predicts measured erosion rates, which is attributed to uncertainties in the ion impact angle distribution, as well as the effect of edge-localized modes. After exposure, minimal changes to the macroscopic or microscopic surface morphology of the SiC coatings were observed. Compositional analysis reveals Si enrichment of about 10%, in line with expectations from the erosion model. Extrapolating to a DEMO-type device, an order-of-magnitude decrease in impurity sourcing, and up to a factor of 2 decrease in impurity radiation, is expected with SiC walls, relative to graphite, if low C plasma impurity content can be achieved. These favorable erosion properties motivate further investigations of SiC as a low-Z, non-metallic PFM. △ Less

Submitted 8 April, 2021; originally announced April 2021.

Comments: 17 pages, 15 figures

Spontaneous dust pulse formation in the afterglow of complex plasmas under microgravity conditions

Authors: Manis Chaudhuri, Lénaïc Couëdel, Edward Thomas, Jr., Peter Huber, Andrey M. Lipaev, Hubertus M. Thomas, Mierk Schwabe

Abstract: A new type of nonlinear dust pulse structures has been observed in afterglow complex plasma under microgravity condition on board the International Space Station (ISS). The dust pulses are triggered spontaneously as the plasma is switched off and the particles start to flow through each other (uni-directional or counter-streaming) in the presence of a low-frequency external electric excitation. Th… ▽ More A new type of nonlinear dust pulse structures has been observed in afterglow complex plasma under microgravity condition on board the International Space Station (ISS). The dust pulses are triggered spontaneously as the plasma is switched off and the particles start to flow through each other (uni-directional or counter-streaming) in the presence of a low-frequency external electric excitation. The pulses are oblique with respect to the microparticle cloud and appear to be symmetric with respect to the central axis. A possible explanation of this observation with the spontaneous development of a double layer in the afterglow of complex plasma is described. △ Less

Submitted 17 March, 2021; originally announced March 2021.

Comments: 11 pages, 9 figures

Heartbeat instability as auto-oscillation between dim and bright void regimes

Authors: Aleksandr Pikalev, Mikhail Pustylnik, Christoph Räth, Hubertus M. Thomas

Abstract: We investigated the self-excited as well as optogalvanically stimulated heartbeat instability in RF discharge complex plasma. Three video cameras measured the motion of the microparticles, the plasma emission, and the laser-induced fluorescence simultaneously. Comprehensive studies of the optogalvanic control of the heartbeat instability revealed that the microparticle suspension can be stabilized… ▽ More We investigated the self-excited as well as optogalvanically stimulated heartbeat instability in RF discharge complex plasma. Three video cameras measured the motion of the microparticles, the plasma emission, and the laser-induced fluorescence simultaneously. Comprehensive studies of the optogalvanic control of the heartbeat instability revealed that the microparticle suspension can be stabilized by a continuous laser, whereas a modulated laser beam induces the void contraction either transiently or resonantly. The resonance occurred when the laser modulation frequency coincided with the frequency of small breathing oscillations of the microparticle suspension, which are known to be a prerequisite to the heartbeat instability. Based on the experimental results we suggest that the void contraction during the instability is caused by an abrupt void transition from the dim to the bright regime [Pikalev et al., Plasma Sources Sci. Technol. 30, 035014 (2021)]. In the bright regime, a time-averaged electric field at the void boundary heats the electrons causing bright plasma emission inside the void. The dim void has much lower electric field at the boundary and exhibits therefore no emission feature associated with it. △ Less

Submitted 4 November, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Comments: 10 pages, 10 figures, supplemental materials

Journal ref: Phys. Rev. E 104, 045212 (2021)

Point absorbers in Advanced LIGO

Authors: Aidan F. Brooks, Gabriele Vajente, Hiro Yamamoto, Rich Abbott, Carl Adams, Rana X. Adhikari, Alena Ananyeva, Stephen Appert, Koji Arai, Joseph S. Areeda, Yasmeen Asali, Stuart M. Aston, Corey Austin, Anne M. Baer, Matthew Ball, Stefan W. Ballmer, Sharan Banagiri, David Barker, Lisa Barsotti, Jeffrey Bartlett, Beverly K. Berger, Joseph Betzwieser, Dripta Bhattacharjee, Garilynn Billingsley, Sebastien Biscans , et al. (176 additional authors not shown)

Abstract: Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback contro… ▽ More Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises. △ Less

Submitted 25 March, 2021; v1 submitted 14 January, 2021; originally announced January 2021.

Comments: 49 pages, 16 figures. -V2: typographical errors in equations B9 and B10 were corrected (stray exponent of "h" was removed). Caption of Figure 9 was corrected to indicate that 40mW was used for absorption in the model, not 10mW as incorrectly indicated in V1

Report number: Report-no: P1900287

Bayesian Analysis of a Future Beta Decay Experiment's Sensitivity to Neutrino Mass Scale and Ordering

Authors: A. Ashtari Esfahani, M. Betancourt, Z. Bogorad, S. Böser, N. Buzinsky, R. Cervantes, C. Claessens, L. de Viveiros, M. Fertl, J. A. Formaggio, L. Gladstone, M. Grando, M. Guigue, J. Hartse, K. M. Heeger, X. Huyan, J. Johnston, A. M. Jones, K. Kazkaz, B. H. LaRoque, A. Lindman, R. Mohiuddin, B. Monreal, J. A. Nikkel, E. Novitski , et al. (21 additional authors not shown)

Abstract: Bayesian modeling techniques enable sensitivity analyses that incorporate detailed expectations regarding future experiments. A model-based approach also allows one to evaluate inferences and predicted outcomes, by calibrating (or measuring) the consequences incurred when certain results are reported. We present procedures for calibrating predictions of an experiment's sensitivity to both continuo… ▽ More Bayesian modeling techniques enable sensitivity analyses that incorporate detailed expectations regarding future experiments. A model-based approach also allows one to evaluate inferences and predicted outcomes, by calibrating (or measuring) the consequences incurred when certain results are reported. We present procedures for calibrating predictions of an experiment's sensitivity to both continuous and discrete parameters. Using these procedures and a new Bayesian model of the $βべーた$-decay spectrum, we assess a high-precision $βべーた$-decay experiment's sensitivity to the neutrino mass scale and ordering, for one assumed design scenario. We find that such an experiment could measure the electron-weighted neutrino mass within $\sim40\,$meV after 1 year (90$\%$ credibility). Neutrino masses $>500\,$meV could be measured within $\approx5\,$meV. Using only $βべーた$-decay and external reactor neutrino data, we find that next-generation $βべーた$-decay experiments could potentially constrain the mass ordering using a two-neutrino spectral model analysis. By calibrating mass ordering results, we identify reporting criteria that can be tuned to suppress false ordering claims. In some cases, a two-neutrino analysis can reveal that the mass ordering is inverted, an unobtainable result for the traditional one-neutrino analysis approach. △ Less

Submitted 1 June, 2021; v1 submitted 24 December, 2020; originally announced December 2020.

Comments: 17 pages, 10 figures

Journal ref: Phys. Rev. C 103, 065501 (2021)

Effect of ageing on the properties of the W-containing IRIS-TiAl alloy

Authors: Alain Couret, David Reyes, Marc Thomas, Nicolas Ratel-Ramond, Christophe Deshayes, Jean-Philippe Monchoux

Abstract: The effects of ageing at 800 $^\circ$C on the properties of the IRIS alloy (Ti$_{49.9}$Al$_{48}$W$_2$B$_{0.1}$) are studied. The initial microstructure of this alloy densified by Spark Plasma Sintering (SPS) is mainly composed of lamellar colonies which are surrounded by $γがんま$ grains. The evolutions of the alloy strength and creep resistance resulting from this ageing treatment are measured by the r… ▽ More The effects of ageing at 800 $^\circ$C on the properties of the IRIS alloy (Ti$_{49.9}$Al$_{48}$W$_2$B$_{0.1}$) are studied. The initial microstructure of this alloy densified by Spark Plasma Sintering (SPS) is mainly composed of lamellar colonies which are surrounded by $γがんま$ grains. The evolutions of the alloy strength and creep resistance resulting from this ageing treatment are measured by the related mechanical tests. The microstructural changes are investigated by scanning and transmission electron microscopies and by X-ray diffraction. The main structural evolutions consist in a shrinkage of the lamellar areas and in a precipitation of $βべーた_0$ phase, which is accompanied by a moderate segregation of tungsten and a decrease of the $αあるふぁ_2$ lamellar width. However, these evolutions are relatively limited and the microstructural stability is found to result mainly from the low diffusivity of tungsten. Conversely, a moderate effect of this ageing treatment on mechanical properties, at room and high temperatures, is measured. Such experimental results are interpreted and discussed in terms of the microstructural evolutions and of the deformation mechanisms which are activated at different temperatures under various solicitations. △ Less

Submitted 3 December, 2020; originally announced December 2020.

Journal ref: Acta Materialia, Elsevier, 2020, 199, pp.169-180

Shear flow in a three-dimensional complex plasma in microgravity conditions

Authors: V. Nosenko, M. Pustylnik, M. Rubin-Zuzic, A. M. Lipaev, A. V. Zobnin, A. D. Usachev, H. M. Thomas, M. H. Thoma, V. E. Fortov, O. Kononenko, A. Ovchinin

Abstract: Shear flow in a three-dimensional complex plasma was experimentally studied in microgravity conditions using Plasmakristall-4 (PK-4) instrument on board the International Space Station (ISS). The shear flow was created in an extended suspension of microparticles by applying the radiation pressure force of the manipulation-laser beam. Individual particle trajectories in the flow were analyzed and f… ▽ More Shear flow in a three-dimensional complex plasma was experimentally studied in microgravity conditions using Plasmakristall-4 (PK-4) instrument on board the International Space Station (ISS). The shear flow was created in an extended suspension of microparticles by applying the radiation pressure force of the manipulation-laser beam. Individual particle trajectories in the flow were analyzed and from these, using the Navier-Stokes equation, an upper estimate of the complex plasma's kinematic viscosity was calculated in the range of $0.2$--$6.7~{\rm mm^2/s}$. This estimate is much lower than previously reported in ground-based experiments with 3D complex plasmas. Possible reasons of this difference are discussed. △ Less

Submitted 21 September, 2020; originally announced September 2020.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Research 2, 033404 (2020)

Improving the Robustness of the Advanced LIGO Detectors to Earthquakes

Authors: Eyal Schwartz, A Pele, J Warner, B Lantz, J Betzwieser, K L Dooley, S Biscans, M Coughlin, N Mukund, R Abbott, C Adams, R X Adhikari, A Ananyeva, S Appert, K Arai, J S Areeda, Y Asali, S M Aston, C Austin, A M Baer, M Ball, S W Ballmer, S Banagiri, D Barker, L Barsotti , et al. (174 additional authors not shown)

Abstract: Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differenti… ▽ More Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differential motion of the interferometer arms with respect to one another, resulting in a reduction of DARM signal at frequencies below 100\,mHz. Our method greatly improved the interferometers' capability to remain operational during earthquakes, with ground velocities up to 3.9\,$μみゅー\mbox{m/s}$ rms in the beam direction, setting a new record for both detectors. This sets a milestone in seismic controls of the Advanced LIGO detectors' ability to manage high ground motion induced by earthquakes, opening a path for further robust operation in other extreme environmental conditions. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Penetration of a supersonic particle at the interface in a binary complex plasma

Authors: He Huang, Mierk Schwabe, Hubertus M Thomas, Andrey M Lipaev, Cheng-Ran Du

Abstract: The penetration of a supersonic particle at the interface was studied in a binary complex plasma. Inspired by the experiments performed in the PK-3 Plus Laboratory on board the International Space Station, Langevin dynamics simulations were carried out. The evolution of Mach cone at the interface was observed, where a kink of the lateral wake front was observed at the interface. By comparing the e… ▽ More The penetration of a supersonic particle at the interface was studied in a binary complex plasma. Inspired by the experiments performed in the PK-3 Plus Laboratory on board the International Space Station, Langevin dynamics simulations were carried out. The evolution of Mach cone at the interface was observed, where a kink of the lateral wake front was observed at the interface. By comparing the evolution of axial and radial velocity, we show that the interface solitary wave is non-linear. The dependence of the background particle dynamics in the vicinity of the interface on the penetration direction reveals that the disparity of the mobility may be the cause of various interface effects. △ Less

Submitted 13 April, 2020; originally announced April 2020.

Journal ref: Phys. Rev. E 103, 013205 (2021)

A Diffusion-Based Embedding of the Stochastic Simulation Algorithm in Continuous Space

Authors: Marcus Thomas, Russell Schwartz

Abstract: A variety of simulation methodologies have been used for modeling reaction-diffusion dynamics -- including approaches based on Differential Equations (DE), the Stochastic Simulation Algorithm (SSA), Brownian Dynamics (BD), Green's Function Reaction Dynamics (GFRD), and variations thereon -- each offering trade-offs with respect to the ranges of phenomena they can model, their computational tractab… ▽ More A variety of simulation methodologies have been used for modeling reaction-diffusion dynamics -- including approaches based on Differential Equations (DE), the Stochastic Simulation Algorithm (SSA), Brownian Dynamics (BD), Green's Function Reaction Dynamics (GFRD), and variations thereon -- each offering trade-offs with respect to the ranges of phenomena they can model, their computational tractability, and the difficulty of fitting them to experimental measurements. Here, we develop a multiscale approach combining efficient SSA-like sampling suitable for well-mixed systems with aspects of the slower but space-aware GFRD model, assuming as with GFRD that reactions occur in a spatially heterogeneous environment that must be explicitly modeled. Our method extends the SSA approach in two major ways. First, we sample bimolecular association reactions following diffusive motion with a time-dependent reaction propensity. Second, reaction locations are sampled from within overlapping diffusion spheres describing the spatial probability densities of individual reactants. We show the approach to provide efficient simulation of spatially heterogeneous biochemistry in comparison to alternative methods via application to a Michaelis-Menten model. △ Less

Submitted 20 May, 2021; v1 submitted 3 April, 2020; originally announced April 2020.

Three-dimensional structure of a string-fluid complex plasma

Authors: M. Y. Pustylnik, B. Klumov, M. Rubin-Zuzic, A. M. Lipaev, V. Nosenko, D. Erdle, A. D. Usachev, A. V. Zobnin, V. I. Molotkov, G. Joyce, H. M. Thomas, M. H. Thoma, O. F. Petrov, V. E. Fortov, O. Kononenko

Abstract: Three-dimensional structure of complex (dusty) plasmas was investigated under long-term microgravity conditions in the International-Space-Station-based Plasmakristall-4 facility. The microparticle suspensions were confined in a polarity-switched dc discharge. The experimental results were compared to the results of the molecular dynamics simulations with the interparticle interaction potential re… ▽ More Three-dimensional structure of complex (dusty) plasmas was investigated under long-term microgravity conditions in the International-Space-Station-based Plasmakristall-4 facility. The microparticle suspensions were confined in a polarity-switched dc discharge. The experimental results were compared to the results of the molecular dynamics simulations with the interparticle interaction potential represented as a superposition of isotropic Yukawa and anisotropic quadrupole terms. Both simulated and experimental data exhibited qualitatively similar structural features indicating the bulk liquid-like order with the inclusion of solid-like strings aligned with the axial electric field. Individual strings were identified and their size spectrum was calculated. The decay rate of the size spectrum was found to decrease with the enhancement of string-like structural features. △ Less

Submitted 11 May, 2020; v1 submitted 6 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Research 2, 033314 (2020)

Polarization Selective Modulation of the Supercavity Resonance from Friedrich-Wintgen Bound States in the Continuum

Authors: C. Kyaw, R. Yahiaoui, J. A. Burrow, V. Tran, K. Keelen, W. Sims, E. C. Red, W. S. Rockward, M. A. Thomas, A. Sarangan, I. Agha, T. A. Searles

Abstract: Bound states in the continuum (BICs) are widely studied for their ability to confine light, produce sharp resonances for sensing applications and serve as avenues for lasing action with topological characteristics. Recent experiments have demonstrated the existence of exotic modes which occur in off-$Γがんま$\ points not accessible by symmetry-protected BICs, Freidrich-Wintgen (FW) BICs. In previous wor… ▽ More Bound states in the continuum (BICs) are widely studied for their ability to confine light, produce sharp resonances for sensing applications and serve as avenues for lasing action with topological characteristics. Recent experiments have demonstrated the existence of exotic modes which occur in off-$Γがんま$\ points not accessible by symmetry-protected BICs, Freidrich-Wintgen (FW) BICs. In previous works, FW BICs were formed by either varying the incident angle or through geometric manipulation. On the contrary, in this work we demonstrate the formation of FW BICs induced by different linear polarization states of incident terahertz waves. Furthermore, as predicted by theory, the position of the FW BIC region is verified to change as a function of asymmetry. This allows for a unique parameter, incident polarization, to induce the FW BIC and modulate the supercavity resonance with the degree of asymmetry. The polarization-selective quasi-BICs observed near the FW BIC have potential applications in lasing, spectral filtering and high-performance sensing devices. △ Less

Submitted 16 January, 2020; originally announced January 2020.

Comments: 6 pages, 4 figures

Particle charge in PK-4 dc discharge from ground-based and microgravity experiments

Authors: T. Antonova, S. A. Khrapak, M. Y. Pustylnik, M. Rubin-Zuzic, H. M. Thomas, A. M. Lipaev, A. D. Usachev, V. I. Molotkov, M. H. Thoma

Abstract: The charge of microparticles immersed in the dc discharge of the Plasmakristall-4 experimental facility has been estimated using the particle velocities from experiments performed on Earth and under microgravity conditions on the International Space Station. The theoretical model used for these estimates is based on the balance of the forces acting on a single particle in the discharge. The model… ▽ More The charge of microparticles immersed in the dc discharge of the Plasmakristall-4 experimental facility has been estimated using the particle velocities from experiments performed on Earth and under microgravity conditions on the International Space Station. The theoretical model used for these estimates is based on the balance of the forces acting on a single particle in the discharge. The model takes into account the radial dependence of the discharge parameters and describes reasonably well the experimental measurements. △ Less

Submitted 13 November, 2019; originally announced November 2019.

Comments: 6 pages, 5 figures, published in Phys. Plasmas

Journal ref: Physics of Plasmas 26, 113703 (2019)

Impact of ELM control techniques on tungsten sputtering in the DIII-D divertor and extrapolations to ITER

Authors: T. Abrams, E. A. Unterberg, D. L. Rudakov, A. W. Leonard, O. Schmitz, D. Shiraki, L. R. Baylor, P. C. Stangeby, D. M. Thomas, H. Q. Wang

Abstract: The free-streaming plus recycling model (FSRM) has recently been developed to understand and predict tungsten gross erosion rates from the divertor during edge localized modes (ELMs). In this work, the FSRM was tested against experimental measurements of W sputtering during ELMs, conducted via fast WI spectroscopy. Good agreement is observed using a variety of controlling techniques, including gas… ▽ More The free-streaming plus recycling model (FSRM) has recently been developed to understand and predict tungsten gross erosion rates from the divertor during edge localized modes (ELMs). In this work, the FSRM was tested against experimental measurements of W sputtering during ELMs, conducted via fast WI spectroscopy. Good agreement is observed using a variety of controlling techniques, including gas puffing, neutral beam heating, and plasma shaping to modify the pedestal stability boundary and thus the ELM behavior. ELM mitigation by pellet pacing was observed to strongly reduce W sputtering by flushing C impurities from the pedestal and reducing the divertor target electron temperature. No reduction of W sputtering was observed during the application of resonant magnetic perturbations (RMPs), in contrast to the prediction of the FSRM. Potential sources of this discrepancy are discussed. Finally, the framework of the FSRM is utilized to predict intra-ELM W sputtering rates in ITER. It is concluded that W erosion during ELMs in ITER will be caused mainly by free-streaming fuel ions, but free-streaming seeded impurities (N or Ne) may increase the erosion rate significantly if present in the pedestal at even the 1% level. Impurity recycling is not expected to cause significant W erosion in ITER due to the very low target electron temperature. △ Less

Submitted 6 November, 2019; originally announced November 2019.

Journal ref: Phys. Plasmas 26, 062504 (2019)

Signature of transition to supershear rupture speed in coseismic off-fault damage zone

Authors: Jorge Jara, Lucile Bruhat, Marion Y. Thomas, Solène Antoine, Kurama Okubo, Esteban Rougier, Ares J. Rosakis, Charles G. Sammis, Yann Klinger, Romain Jolivet, Harsha S. Bhat

Abstract: Most earthquake ruptures propagate at speeds below the shear wave velocity within the crust, but in some rare cases, ruptures reach supershear speeds. The physics underlying the transition of natural subshear earthquakes to supershear ones is currently not fully understood. Most observational studies of supershear earthquakes have focused on determining which fault segments sustain fully-grown sup… ▽ More Most earthquake ruptures propagate at speeds below the shear wave velocity within the crust, but in some rare cases, ruptures reach supershear speeds. The physics underlying the transition of natural subshear earthquakes to supershear ones is currently not fully understood. Most observational studies of supershear earthquakes have focused on determining which fault segments sustain fully-grown supershear ruptures. Experimentally cross-validated numerical models have identified some of the key ingredients required to trigger a transition to supershear speed. However, the conditions for such a transition in nature are still unclear, including the precise location of this transition. In this work, we provide theoretical and numerical insights to identify the precise location of such a transition in nature. We use fracture mechanics arguments with multiple numerical models to identify the signature of supershear transition in coseismic off-fault damage. We then cross-validate this signature with high-resolution observations of fault zone width and early aftershock distributions. We confirm that the location of the transition from subshear to supershear speed is characterized by a decrease in the width of the coseismic off-fault damage zone. We thus help refine the precise location of such a transition for natural supershear earthquakes. △ Less

Submitted 18 October, 2021; v1 submitted 27 September, 2019; originally announced September 2019.

New approach to measurement of the three dimensional crystallization front propagation velocity in strongly coupled complex plasma

Authors: D. I. Zhukhovitskii, V. N. Naumkin, V. I. Molotkov, A. M. Lipaev, H. M. Thomas

Abstract: The PK-3 Plus laboratory onboard the International Space Station is used to form complex plasma with a liquidlike particle subsystem in metastable state and to observe the propagation of crystallization fronts corresponding to the surfaces of crystal domains. We propose the "axis" algorithm of solidlike particles identification, which makes it possible to isolate different domains and their surfac… ▽ More The PK-3 Plus laboratory onboard the International Space Station is used to form complex plasma with a liquidlike particle subsystem in metastable state and to observe the propagation of crystallization fronts corresponding to the surfaces of crystal domains. We propose the "axis" algorithm of solidlike particles identification, which makes it possible to isolate different domains and their surfaces as well. Determination of the three-dimensional front velocity is based on its definition implying that there exists a small area of the domain surface propagating along some line perpendicularly to it. The velocity measured in this way is an important characteristic of the plasma crystallization kinetics. It proves to be almost independent of time and the direction of front propagation and amounts to ca. 60--80 micron per second. △ Less

Submitted 27 June, 2019; v1 submitted 19 March, 2019; originally announced March 2019.

Comments: 10 pages, 8 fidures

Journal ref: Plasma Sources Sci. Technol., v.28, p.065014 (2019)

43 W, 1.55 μみゅーm and 12.5 W, 3.1 μみゅーm dual-beam, sub-10 cycle, 100 kHzきろへるつ optical parametric chirped pulse amplifier

Authors: Mark Mero, Zsuzsanna Heiner, Valentin Petrov, Horst Rottke, Federico Branchi, Gabrielle M. Thomas, Marc. J. J. Vrakking

Abstract: We present a 100 kHzきろへるつ optical parametric chirped pulse amplifier (OPCPA) developed for strong-field attosecond physics and soft-X-ray transient absorption experiments. The system relies on noncollinear potassium titanyl arsenate (KTA) booster OPCPAs and is pumped by a 240 W, 1.1 ps Yb:YAG Innoslab chirped pulse laser amplifier. Two optically synchronized infrared output beams are simultaneously ava… ▽ More We present a 100 kHzきろへるつ optical parametric chirped pulse amplifier (OPCPA) developed for strong-field attosecond physics and soft-X-ray transient absorption experiments. The system relies on noncollinear potassium titanyl arsenate (KTA) booster OPCPAs and is pumped by a 240 W, 1.1 ps Yb:YAG Innoslab chirped pulse laser amplifier. Two optically synchronized infrared output beams are simultaneously available: a 430 μみゅーJ, 51 fs, carrier-envelope phase (CEP) stable beam at 1.55 μみゅーm and an angular-dispersion-compensated, 125 μみゅーJ, 73 fs beam at 3.1 μみゅーm. △ Less

Submitted 29 June, 2018; originally announced July 2018.

Acceleration and Quantitation of Localized Correlated Spectroscopy using Deep Learning: A Pilot Simulation Study

Authors: Zohaib Iqbal, Dan Nguyen, M. Albert Thomas, Steve Jiang

Abstract: Nuclear magnetic resonance spectroscopy (MRS) allows for the determination of atomic structures and concentrations of different chemicals in a biochemical sample of interest. MRS is used in vivo clinically to aid in the diagnosis of several pathologies that affect metabolic pathways in the body. Typically, this experiment produces a one dimensional (1D) 1H spectrum containing several peaks that ar… ▽ More Nuclear magnetic resonance spectroscopy (MRS) allows for the determination of atomic structures and concentrations of different chemicals in a biochemical sample of interest. MRS is used in vivo clinically to aid in the diagnosis of several pathologies that affect metabolic pathways in the body. Typically, this experiment produces a one dimensional (1D) 1H spectrum containing several peaks that are well associated with biochemicals, or metabolites. However, since many of these peaks overlap, distinguishing chemicals with similar atomic structures becomes much more challenging. One technique capable of overcoming this issue is the localized correlated spectroscopy (L-COSY) experiment, which acquires a second spectral dimension and spreads overlapping signal across this second dimension. Unfortunately, the acquisition of a two dimensional (2D) spectroscopy experiment is extremely time consuming. Furthermore, quantitation of a 2D spectrum is more complex. Recently, artificial intelligence has emerged in the field of medicine as a powerful force capable of diagnosing disease, aiding in treatment, and even predicting treatment outcome. In this study, we utilize deep learning to: 1) accelerate the L-COSY experiment and 2) quantify L-COSY spectra. We demonstrate that our deep learning model greatly outperforms compressed sensing based reconstruction of L-COSY spectra at higher acceleration factors. Specifically, at four-fold acceleration, our method has less than 5% normalized mean squared error, whereas compressed sensing yields 20% normalized mean squared error. We also show that at low SNR (25% noise compared to maximum signal), our deep learning model has less than 8% normalized mean squared error for quantitation of L-COSY spectra. These pilot simulation results appear promising and may help improve the efficiency and accuracy of L-COSY experiments in the future. △ Less

Submitted 28 June, 2018; originally announced June 2018.

Comments: 7 figures, 2 tables, 2 supplementary figures

Journal ref: Scientific Reports. 2021 Apr 22;11(1):1-3

Dissipative solitary wave at the interface of a binary complex plasma

Authors: Wei Sun, Mierk Schwabe, Hubertus M Thomas, Andrey M Lipaev, Vladimir I Molotkov, Vladimir E Fortov, Yan Feng, Yi-Fei Lin, Jing Zhang, Cheng-Ran Du

Abstract: The propagation of a dissipative solitary wave across an interface is studied in a binary complex plasma. The experiments were performed under microgravity conditions in the PK-3 Plus Laboratory on board the International Space Station using microparticles with diameters of 1.55 micrometre and 2.55 micrometre immersed in a low-temperature plasma. The solitary wave was excited at the edge of a part… ▽ More The propagation of a dissipative solitary wave across an interface is studied in a binary complex plasma. The experiments were performed under microgravity conditions in the PK-3 Plus Laboratory on board the International Space Station using microparticles with diameters of 1.55 micrometre and 2.55 micrometre immersed in a low-temperature plasma. The solitary wave was excited at the edge of a particle-free region and propagated from the sub-cloud of small particles into that of big particles. The interfacial effect was observed by measuring the deceleration of particles in the wave crest. The results are compared with a Langevin dynamics simulation, where the waves were excited by a gentle push on the edge of the sub-cloud of small particles. Reflection of the wave at the interface is induced by increasing the strength of the push. By tuning the ion drag force exerted on big particles in the simulation, the effective width of the interface is adjusted. We show that the strength of reflection increases with narrower interfaces. △ Less

Submitted 29 May, 2018; originally announced May 2018.

The deteriorating effect of plasma density fluctuations on microwave beam quality

Authors: Alf Köhn, Max E. Austin, Michael W. Brookman, Kenneth W. Gentle, Lorenzo Guidi, Eberhard Holzhauer, Rob J. La Haye, Jarrod B. Leddy, Omar Maj, Craig C. Petty, Emanuele Poli, Terry L. Rhodes, Antti Snicker, Matthew B. Thomas, Roddy G. L. Vann, Hannes Weber

Abstract: Turbulent plasma edge density fluctuations can broaden a traversing microwave beam degrading its quality. This can be a problem for scenarios relying on a high spatial localization of the deposition of injected microwave power, like controlling MHD instabilities. Here we present numerical estimations of the scattering of a microwave beam by density fluctuations over a large parameter range, includ… ▽ More Turbulent plasma edge density fluctuations can broaden a traversing microwave beam degrading its quality. This can be a problem for scenarios relying on a high spatial localization of the deposition of injected microwave power, like controlling MHD instabilities. Here we present numerical estimations of the scattering of a microwave beam by density fluctuations over a large parameter range, including extrapolations to ITER. Two codes are used, the full-wave code IPF-FDMC and the wave kinetic equation solver WKBeam. A successful comparison between beam broadening obtained from DIII-D experiments and corresponding full-wave simulations is shown. △ Less

Submitted 24 May, 2018; originally announced May 2018.

Comments: EPJ Web of Conferences, EC-20 2018 Proceedings, submitted

Dust density waves in a dc flowing complex plasma with discharge polarity reversal

Authors: S. Jaiswal, M. Y. Pustylnik, S. Zhdanov, H. M. Thomas, A. M. Lipaev, A. D. Usachev, V. I. Molotkov, V. E. Fortov, M. H. Thoma, O. V. Novitskii

Abstract: We report on the observation of the self-excited dust density waves in the dc discharge complex plasma. The experiments were performed under microgravity conditions in the Plasmakristall-4 facility on board the International Space Station. In the experiment, the microparticle cloud was first trapped in an inductively coupled plasma, then released to drift for some seconds in a dc discharge with co… ▽ More We report on the observation of the self-excited dust density waves in the dc discharge complex plasma. The experiments were performed under microgravity conditions in the Plasmakristall-4 facility on board the International Space Station. In the experiment, the microparticle cloud was first trapped in an inductively coupled plasma, then released to drift for some seconds in a dc discharge with constant current. After that the discharge polarity was reversed. DC plasma containing a drifting microparticle cloud was found to be strongly non-uniform in terms of microparticle drift velocity and plasma emission in accord with [Zobnin et.al., Phys. Plasmas 25, 033702 (2018)]. In addition to that, non-uniformity in the self-excited wave pattern was observed: In the front edge of the microparticle cloud (defined as head), the waves had larger phase velocity than in the rear edge (defined as tail). Also, after the polarity reversal, the wave pattern exhibited several bifurcations: Between each of the two old wave crests, a new wave crest has formed. These bifurcations, however, occurred only in the head of the microparticle cloud. We show that spatial variations of electric field inside the drifting cloud play an important role in the formation of the wave pattern. Comparison of the theoretical estimations and measurements demonstrate the significant impact of the electric field on the phase velocity of the wave. The same theoretical approach applied to the instability growth rate, showed agreement between estimated and measured values. △ Less

Submitted 11 July, 2018; v1 submitted 18 May, 2018; originally announced May 2018.

Comments: 7 pages, 4 figures

Interaction of a supersonic particle with a three-dimensional complex plasma

Authors: E. Zaehringer, M. Schwabe, S. Zhdanov, D. P. Mohr, C. A. Knapek, P. Huber, I. L. Semenov, H. M. Thomas

Abstract: The influence of a supersonic projectile on a three-dimensional complex plasma is studied. Micron sized particles in a low-temperature plasma formed a large undisturbed system in the new 'Zyflex' chamber during microgravity conditions. A supersonic probe particle excited a Mach cone with Mach number M $\approx$ 1.5 - 2 and double Mach cone structure in the large weakly damped particle cloud. The s… ▽ More The influence of a supersonic projectile on a three-dimensional complex plasma is studied. Micron sized particles in a low-temperature plasma formed a large undisturbed system in the new 'Zyflex' chamber during microgravity conditions. A supersonic probe particle excited a Mach cone with Mach number M $\approx$ 1.5 - 2 and double Mach cone structure in the large weakly damped particle cloud. The speed of sound is measured with different methods and particle charge estimations are compared to calculations from standard theories. The high image resolution enables the study of Mach cones in microgravity on the single particle level of a three-dimensional complex plasma and gives insight to the dynamics. A heating of the microparticles is discovered behind the supersonic projectile but not in the flanks of the Mach cone. △ Less

Submitted 2 March, 2018; originally announced March 2018.

Journal ref: Physics of Plasmas 25, 033703 (2018)

Coupling of non-crossing wave modes in a two-dimensional plasma crystal

Authors: J. K. Meyer, I. Laut, S. K. ZHdanov, V. Nosenko, H. M. Thomas

Abstract: We report an experimental observation of coupling of the transverse vertical and longitudinal in-plane dust-lattice wave modes in a two-dimensional complex plasma crystal in the absence of mode crossing. A new large diameter rf plasma chamber was used to suspend the plasma crystal. The observations are confirmed with molecular-dynamics simulations. The coupling manifests itself in traces of the tr… ▽ More We report an experimental observation of coupling of the transverse vertical and longitudinal in-plane dust-lattice wave modes in a two-dimensional complex plasma crystal in the absence of mode crossing. A new large diameter rf plasma chamber was used to suspend the plasma crystal. The observations are confirmed with molecular-dynamics simulations. The coupling manifests itself in traces of the transverse vertical mode appearing in the measured longitudinal spectra and vice versa. We calculate the expected ratio of the trace to the principal mode with a theoretical analysis of the modes in a crystal with finite temperature and find good agreement with the experiment and simulations. △ Less

Submitted 6 December, 2017; originally announced December 2017.

Comments: 4 figures, 5 pages, accepted for publication in PRL Nov 2017

Resolving ECRH deposition broadening due to edge turbulence in DIII-D by heat deposition measurement

Authors: Michael W Brookman, Matthew B Thomas, Jarrod Leddy, C Craig Petty, Robert J La Haye, K Barada, Terry L Rhodes, Zheng Yan, Max E Austin, Roddy G L Vann

Abstract: Interaction between microwave power, used for local heating and mode control, and density fluctuations can produce a broadening of the injected beam, as confirmed in experiment and simulation. Increased power deposition width could impact suppression of tearing mode structures on ITER. This work discusses the experimental portion of an effort to understand scattering of injected microwaves by turb… ▽ More Interaction between microwave power, used for local heating and mode control, and density fluctuations can produce a broadening of the injected beam, as confirmed in experiment and simulation. Increased power deposition width could impact suppression of tearing mode structures on ITER. This work discusses the experimental portion of an effort to understand scattering of injected microwaves by turbulence on the DIII-D tokamak. The corresponding theoretical modeling work can be found in M.B. Thomas et. al.: Submitted to Nuclear Fusion (2017)[Author Note - this paper to be published in same journal]. In a set of perturbative heat transport experiments, tokamak edge millimeter-scale fluctuation levels and microwave heat deposition are measured simultaneously. Beam broadening is separated from heat transport through fitting of modulated fluxes. Electron temperature measurements from a 500 kHzきろへるつ, 48-channel ECE radiometer are Fourier analyzed and used to calculate a deposition-dependent flux. Consistency of this flux with a transport model is evaluated. A diffusive and convective transport solution is linearized and compared with energy conservation-derived fluxes. Comparison between these two forms of heat flux is used to evaluate the quality of ECRF deposition profiles, and fitting finds a significant broadening of 1D equilibrium ray tracing calculations from the benchmarked TORAY-GA ray tracing code is needed. The physical basis, cross-validation, and application of the heat flux method is presented. The method is applied to a range of DIII-D discharges and finds a broadening factor of the deposition profile width which scales linearly with edge density fluctuation level. These experimental results are found to be consistent with the full-wave beam broadening measured by the 3D full wave simulations in the same discharges. △ Less

Submitted 10 October, 2017; originally announced October 2017.

Comments: 21 Pages, 9 Figures

Resolving ECRH deposition broadening due to edge turbulence in DIII-D by 3D full-wave simulations

Authors: Matthew B Thomas, Michael W Brookman, Max E Austin, Alf Köhn, Robert J La Haye, Jarrod B Leddy, Roddy G L Vann, Zheng Yan

Abstract: Edge plasma density fluctuations are shown to have a significant effect on the electron cyclotron resonance heating (ECRH) beam in the DIII-D tokamak. Experimental measurements of the ECRH deposition profile have been taken in three operating scenarios: L-mode, H-mode and negative triangularity. Each scenario corresponds to distinct turbulence characteristics in the edge region through which the b… ▽ More Edge plasma density fluctuations are shown to have a significant effect on the electron cyclotron resonance heating (ECRH) beam in the DIII-D tokamak. Experimental measurements of the ECRH deposition profile have been taken in three operating scenarios: L-mode, H-mode and negative triangularity. Each scenario corresponds to distinct turbulence characteristics in the edge region through which the beam must propagate. The measured ECRH deposition profile is significantly broadened by comparison to the profile predicted by the ray tracing code TORAY-GA and has been shown to scale with the severity of edge turbulence. Conventional ray tracing does not include the effects of turbulence and therefore a 3D full-wave cold plasma finite difference time domain code EMIT-3D is presented and used for the simulations. The turbulence is generated through the Hermes model in the BOUT++ framework which takes as input the measured time averaged electron density, temperature and magnetic field profiles for the specific shot in question. The simulated turbulence is constrained to match the experimentally measured (by use of the BES and DBS systems) correlation length and normalised fluctuation levels. The predictions of the beam broadening from the simulations are found to agree very well with the experimentally-observed broadening in all cases: L-mode, H-mode and negative triangularity. Due to the large gradients within the H-mode edge, the resolution uncertainty and error in the measurement from Thomson scattering and BES diagnostics result in a spread in the simulated turbulence amplitude. In light of this a parameter scan through the range in experimental diagnostic measurement uncertainty has been conducted to explore the impact on beam broadening predictions. △ Less

Submitted 9 October, 2017; originally announced October 2017.

Capacitively-coupled rf discharge with a large amount of microparticles: spatiotemporal emission pattern and microparticle arrangement

Authors: M. Y. Pustylnik, I. L. Semenov, E. Zähringer, H. M. Thomas

Abstract: The effect of micron-sized particles on a low-pressure capacitively-coupled rf discharge is studied both experimentally and using numerical simulations. In the laboratory experiments, microparticle clouds occupying a considerable fraction of the discharge volume are supported against gravity with the help of the thermophoretic force. The spatiotemporally resolved optical emission measurements are… ▽ More The effect of micron-sized particles on a low-pressure capacitively-coupled rf discharge is studied both experimentally and using numerical simulations. In the laboratory experiments, microparticle clouds occupying a considerable fraction of the discharge volume are supported against gravity with the help of the thermophoretic force. The spatiotemporally resolved optical emission measurements are performed with different arrangements of microparticles. The numerical simulations are carried out on the basis of a one-dimensional hybrid (fluid-kinetic) discharge model describing the interaction between plasma and microparticles in a self-consistent way. The study is focused on the role of microparticle arrangement in interpreting the spatiotemporal emission measurements. We show that it is not possible to reproduce simultaneously the observed microparticle arrangement and emission pattern in the framework of the considered one-dimensional model. This disagreement is discussed and attributed to two-dimensional effects, e.g., radial diffusion of the plasma components. △ Less

Submitted 17 May, 2017; originally announced May 2017.

Journal ref: Phys. Rev. E 96, 033203 (2017)

Anthropogenic influences on groundwater in the vicinity of a long-lived radioactive waste repository

Authors: Matthew A. Thomas, Kristopher L. Kuhlman, Anderson L. Ward

Abstract: The groundwater flow system in the Culebra Dolomite Member (Culebra) of the Permian Rustler Formation is a potential radionuclide release pathway from the Waste Isolation Pilot Plant (WIPP), the only deep geological repository for transuranic waste in the United States. In early conceptual models of the Culebra, groundwater levels were not expected to fluctuate markedly, except in response to long… ▽ More The groundwater flow system in the Culebra Dolomite Member (Culebra) of the Permian Rustler Formation is a potential radionuclide release pathway from the Waste Isolation Pilot Plant (WIPP), the only deep geological repository for transuranic waste in the United States. In early conceptual models of the Culebra, groundwater levels were not expected to fluctuate markedly, except in response to long-term climatic changes, with response times on the order of hundreds to thousands of years. Recent groundwater pressures measured in monitoring wells record more than 25 m of drawdown. The fluctuations are attributed to pumping activities at a privately-owned well that may be associated with the demand of the Permian Basin hydrocarbon industry for water. The unprecedented magnitude of drawdown provides an opportunity to quantitatively assess the influence of unplanned anthropogenic forcings near the WIPP. Spatially variable realizations of Culebra saturated hydraulic conductivity and storativity were used to develop groundwater flow models to estimate a pumping rate for the private well and investigate its effect on advective transport. Simulated drawdown shows reasonable agreement with observations (average Model Efficiency coefficient = 0.7). Steepened hydraulic gradients associated with the pumping reduce estimates of conservative particle travel times across the domain by one-half and shift the intersection of the average particle track with the compliance boundary by more than two kilometers. The value of the transient simulations conducted for this study lie in their ability to (i) improve understanding of the Culebra groundwater flow system and (ii) challenge the notion of time-invariant land use in the vicinity of the WIPP. △ Less

Submitted 1 May, 2017; originally announced May 2017.

Comments: 2 tables, 10 figures

Truly unentangled photon pairs without spectral filtering

Authors: Z. Vernon, M. Menotti, C. C. Tison, J. A. Steidle, M. L. Fanto, P. M. Thomas, S. F. Preble, A. M. Smith, P. M. Alsing, M. Liscidini, J. E. Sipe

Abstract: We demonstrate that an integrated silicon microring resonator is capable of efficiently producing photon pairs that are completely unentangled; such pairs are a key component of heralded single photon sources. A dual-channel interferometric coupling scheme can be used to independently tune the quality factors associated with the pump and signal and idler modes, yielding a biphoton wavefunction wit… ▽ More We demonstrate that an integrated silicon microring resonator is capable of efficiently producing photon pairs that are completely unentangled; such pairs are a key component of heralded single photon sources. A dual-channel interferometric coupling scheme can be used to independently tune the quality factors associated with the pump and signal and idler modes, yielding a biphoton wavefunction with Schmidt number arbitrarily close to unity. This will permit the generation of heralded single photon states with unit purity. △ Less

Submitted 30 March, 2017; originally announced March 2017.

Comments: 5 pages, 3 figures

Journal ref: Optics Letters Vol. 42, Issue 18, pp. 3638-3641 (2017)