Showing 1–29 of 29 results for author: Volpe, A

The TES-based Cryogenic AntiCoincidence Detector (CryoAC) of ATHENA X-IFU: a large area silicon microcalorimeter for background particles detection

Authors: M. D'Andrea, C. Macculi, S. Lotti, L. Piro, A. Argan, G. Minervini, G. Torrioli, F. Chiarello, L. Ferrari Barusso, E. Celasco, G. Gallucci, F. Gatti, D. Grosso, M. Rigano, D. Brienza, E. Cavazzuti, A. Volpe

Abstract: We are developing the Cryogenic AntiCoincidence detector (CryoAC) of the ATHENA X-IFU spectrometer. It is a TES-based particle detector aimed to reduce the background of the instrument. Here, we present the result obtained with the last CryoAC single-pixel prototype. It is based on a 1 cm2 silicon absorber sensed by a single 2mm x 1mm Ir/Au TES, featuring an on-chip heater for calibration and diag… ▽ More We are developing the Cryogenic AntiCoincidence detector (CryoAC) of the ATHENA X-IFU spectrometer. It is a TES-based particle detector aimed to reduce the background of the instrument. Here, we present the result obtained with the last CryoAC single-pixel prototype. It is based on a 1 cm2 silicon absorber sensed by a single 2mm x 1mm Ir/Au TES, featuring an on-chip heater for calibration and diagnostic purposes. We have illuminated the sample with 55Fe (6 keV line) and 241Am (60 keV line) radioactive sources, thus studying the detector response and the heater calibration accuracy at low energy. Furthermore, we have operated the sample in combination with a past-generation CryoAC prototype. Here, by analyzing the coincident detections between the two detectors, we have been able to characterize the background spectrum of the laboratory environment and disentangle the primary (i.e. cosmic muons) and secondaries (mostly secondary photons and electrons) signatures in the spectral shape. △ Less

Submitted 19 January, 2024; originally announced January 2024.

Comments: Accepted for publication in the Journal of Low Temperature Physics for LTD-20 special issue

Total power horn-coupled 150 GHz LEKID array for space applications

Authors: A. Paiella, A. Coppolecchia, P. de Bernardis, S. Masi, A. Cruciani, L. Lamagna, G. Pettinari, F. Piacentini, M. Bersanelli, F. Cavaliere, C. Franceschet, M. Gervasi, A. Limonta, S. Mandelli, E. Manzan, A. Mennella, A. Passerini, E. Tommasi, A. Volpe, M. Zannoni

Abstract: We have developed two arrays of lumped element kinetic inductance detectors working in the D-band, and optimised for the low radiative background conditions of a satellite mission aiming at precision measurements of the Cosmic Microwave Background (CMB). The first detector array is sensitive to the total power of the incoming radiation to which is coupled via single-mode waveguides and corrugated… ▽ More We have developed two arrays of lumped element kinetic inductance detectors working in the D-band, and optimised for the low radiative background conditions of a satellite mission aiming at precision measurements of the Cosmic Microwave Background (CMB). The first detector array is sensitive to the total power of the incoming radiation to which is coupled via single-mode waveguides and corrugated feed-horns, while the second is sensitive to the polarisation of the radiation thanks to orthomode transducers. Here, we focus on the total power detector array, which is suitable, for instance, for precision measurements of unpolarised spectral distortions of the CMB, where detecting both polarisations provides a sensitivity advantage. We describe the optimisation of the array design, fabrication and packaging, the dark and optical characterisation, and the performance of the black-body calibrator used for the optical tests. We show that almost all the detectors of the array are photon-noise limited under the radiative background of a 3.6 K black-body. This result, combined with the weak sensitivity to cosmic rays hits demonstrated with the OLIMPO flight, validates the idea of using lumped elements kinetic inductance detectors for precision, space-based CMB missions. △ Less

Submitted 10 June, 2022; v1 submitted 16 November, 2021; originally announced November 2021.

Comments: To be submitted to JCAP

In-flight performance of the LEKIDs of the OLIMPO experiment

Authors: A. Paiella, P. A. R. Ade, E. S. Battistelli, M. G. Castellano, I. Colantoni, F. Columbro, A. Coppolecchia, G. D'Alessandro, P. de Bernardis, M. De Petris, S. Gordon, L. Lamagna, C. Magneville, S. Masi, P. Mauskopf, G. Pettinari, F. Piacentini, G. Pisano, G. Polenta, G. Presta, E. Tommasi, C. Tucker, V. Vdovin, A. Volpe, D. Yvon

Abstract: We describe the in-flight performance of the horn-coupled Lumped Element Kinetic Inductance Detector arrays of the balloon-borne OLIMPO experiment. These arrays have been designed to match the spectral bands of OLIMPO: 150, 250, 350, and 460 GHz, and they have been operated at 0.3 K and at an altitude of 37.8 km during the stratospheric flight of the OLIMPO payload, in Summer 2018. During the firs… ▽ More We describe the in-flight performance of the horn-coupled Lumped Element Kinetic Inductance Detector arrays of the balloon-borne OLIMPO experiment. These arrays have been designed to match the spectral bands of OLIMPO: 150, 250, 350, and 460 GHz, and they have been operated at 0.3 K and at an altitude of 37.8 km during the stratospheric flight of the OLIMPO payload, in Summer 2018. During the first hours of flight, we tuned the detectors and verified their large dynamics under the radiative background variations due to elevation increase of the telescope and to the insertion of the plug-in room-temperature differential Fourier transform spectrometer into the optical chain. We have found that the detector noise equivalent powers are close to be photon-noise limited and lower than those measured on the ground. Moreover, the data contamination due to primary cosmic rays hitting the arrays is less than 3% for all the pixels of all the arrays, and less than 1% for most of the pixels. These results can be considered the first step of KID technology validation in a representative space environment. △ Less

Submitted 10 February, 2020; originally announced February 2020.

Journal ref: Journal of Low Temperature Physics 2020

The Demonstration Model of the ATHENA X-IFU Cryogenic AntiCoincidence Detector

Authors: Matteo D'Andrea, Claudio Macculi, Guido Torrioli, Andrea Argan, Daniele Brienza, Simone Lotti, Gabriele Minervini, Luigi Piro, Michele Biasotti, Lorenzo Ferrari Barusso, Flavio Gatti, Manuela Rigano, Angela Volpe, Elia Stefano Battistelli

Abstract: The Cryogenic AntiCoincidence Detector (CryoAC) of ATHENA X-IFU is designed to reduce the particle background of the instrument and to enable the mission science goals. It is a 4 pixel silicon microcalorimeter sensed by an Ir/Au TES network. We have developed the CryoAC Demonstration Model, a prototype aimed to probe the critical technologies of the detector, i.e. the suspended absorber with an ac… ▽ More The Cryogenic AntiCoincidence Detector (CryoAC) of ATHENA X-IFU is designed to reduce the particle background of the instrument and to enable the mission science goals. It is a 4 pixel silicon microcalorimeter sensed by an Ir/Au TES network. We have developed the CryoAC Demonstration Model, a prototype aimed to probe the critical technologies of the detector, i.e. the suspended absorber with an active area of 1 cm2; the low energy threshold of 20 keV; and the operation connected to a 50 mK thermal bath with a power dissipation less than 40 nW. Here we report the test performed on the first CryoAC DM sample (namely the AC-S10 prototype), showing that it is fully compliant with its requirements. △ Less

Submitted 13 December, 2019; originally announced December 2019.

Comments: Accepted for publication in the Journal of Low Temperature Physics for LTD-18 special issue

Large vacuum flux surfaces generated by tilted planar coils

Authors: Jessica L. Li, Jacob Austin, Ben Y. Israeli, Kenneth C. Hammond, Francesco A. Volpe

Abstract: Helical equilibria can be generated by arrangements of planar coils similar to tokamaks, but without a central solenoid and with the toroidal field (TF) coils tilted with respect to the vertical. This is known from earlier numerical works, e.g. P.E. Moroz, Phys.Plasmas 2, 4269 (1995). However, such concept tends to need large coils (of low aspect ratio) but form small plasmas (of large aspect rati… ▽ More Helical equilibria can be generated by arrangements of planar coils similar to tokamaks, but without a central solenoid and with the toroidal field (TF) coils tilted with respect to the vertical. This is known from earlier numerical works, e.g. P.E. Moroz, Phys.Plasmas 2, 4269 (1995). However, such concept tends to need large coils (of low aspect ratio) but form small plasmas (of large aspect ratio). Here it is numerically shown that larger, more attractive vacuum flux surfaces -- relative to the size of the device -- can be generated by carefully optimizing the inclination of the TF coils and currents in the various coil-sets. Vacuum configurations of aspect ratios as low as 4 are found for 6 tilted TF circular coils. Higher numbers of TF coils have advantages (smaller effective ripple) and disadvantages (lower rotational transform, smaller plasma). Finally, the aspect-ratio $A$ of the vacuum flux surfaces is quantified as a function of the ratio $A_c$ of the coil-radius to the radial location of the coil-center. It is found that, in order to minimize $A$, it is beneficial to interlink or marginally interlink the TF coils ($A_c \lesssim 1$). △ Less

Submitted 10 December, 2018; v1 submitted 27 September, 2018; originally announced September 2018.

Comments: 21 pages, 12 figures

The Cryogenic AntiCoincidence detector for ATHENA X-IFU: improvement of the test setup towards the Demonstration Model

Authors: Matteo D'Andrea, Claudio Macculi, Andrea Argan, Simone Lotti, Gabriele Minervini, Luigi Piro, Michele Biasotti, Dario Corsini, Flavio Gatti, Guido Torrioli, Angela Volpe

Abstract: The ATHENA X-IFU development program foresees to build and characterize an instrument Demonstration Model (DM), in order to probe the system critical technologies before the mission adoption. In this respect, we are now developing the DM of the X-IFU Cryogenic Anticoincidence Detector (CryoAC), which will be delivered to the Focal Plane Assembly (FPA) development team for the integration with the… ▽ More The ATHENA X-IFU development program foresees to build and characterize an instrument Demonstration Model (DM), in order to probe the system critical technologies before the mission adoption. In this respect, we are now developing the DM of the X-IFU Cryogenic Anticoincidence Detector (CryoAC), which will be delivered to the Focal Plane Assembly (FPA) development team for the integration with the TES array. Before the delivery, we will characterize and test the CryoAC DM in our CryoLab at INAF/IAPS. In this paper we report the main results of the activities performed to improve our cryogenic test setup, making it suitable for the DM integration. These activities mainly consist in the development of a mechanichal setup and a cryogenic magnetic shielding system, whose effectiveness has been assessed by FEM simulations and a measurement at warm. The preliminary performance test has been performed by means of the last CryoAC single pixel prototype, the AC-S8 pre-DM sample. △ Less

Submitted 23 July, 2018; originally announced July 2018.

Comments: Accepted for publication in the Journal of Low Temperature Physics for LTD-17 special issue

The Cryogenic Anticoincidence Detector for ATHENA X-IFU: Preliminary test of AC-S9 towards the Demonstration Model

Authors: Matteo D'Andrea, Claudio Macculi, Andrea Argan, Simone Lotti, Gabriele Minervini, Luigi Piro, Michele Biasotti, Valentina Ceriale, Giovanni Gallucci, Flavio Gatti, Guido Torrioli, Angela Volpe

Abstract: Our team is developing the Cryogenic Anticoincidence Detector (CryoAC) of the ATHENA X-ray Integral Field Unit (X-IFU). It is a 4-pixels TES-based detector, which will be placed less than 1 mm below the main TES array detector. We are now producing the CryoAC Demonstration Model (DM): a single pixel prototype able to probe the detector critical technologies, i.e. the operation at 50 mK thermal bat… ▽ More Our team is developing the Cryogenic Anticoincidence Detector (CryoAC) of the ATHENA X-ray Integral Field Unit (X-IFU). It is a 4-pixels TES-based detector, which will be placed less than 1 mm below the main TES array detector. We are now producing the CryoAC Demonstration Model (DM): a single pixel prototype able to probe the detector critical technologies, i.e. the operation at 50 mK thermal bath, the threshold energy at 20 keV and the reproducibility of the thermal conductance between the suspended absorber and the thermal bath. This detector will be integrated and tested in our cryogenic setup at INAF/IAPS, and then delivered to SRON for the integration in the X-IFU Focal Plane Assemby (FPA) DM. In this paper we report the status of the CryoAC DM development, showing the main result obtained with the last developed prototype, namely AC-S9. This is a DM-like sample, which we have preliminary integrated and tested before performing the final etching process to suspend the silicon absorber. The results are promising for the DM, since despite the limitations due to the absence of the final etching (high thermal capacity, high thermal conductance, partial TES surface coverage), we have been able to operate the detector with TB = 50 mK and to detect 6 keV photons, thus having a low energy threshold fully compatible with our requirement (20 keV). △ Less

Submitted 11 July, 2018; v1 submitted 6 July, 2018; originally announced July 2018.

Comments: Proceeding of the SPIE Astronomical Telescopes + Instrumentation 2018

Feedforward and feedback control of locked mode phase and rotation in DIII-D with application to modulated ECCD experiments

Authors: Wilkie Choi, R. J. La Haye, M. J. Lanctot, K. E. J. Olofsson, E. J. Strait, R. Sweeney, F. A. Volpe

Abstract: The toroidal phase and rotation of otherwise locked magnetic islands of toroidal mode number n=1 are controlled in the DIII-D tokamak by means of applied magnetic perturbations of n=1. Pre-emptive perturbations were applied in feedforward to "catch" the mode as it slowed down and entrain it to the rotating field before complete locking, thus avoiding the associated major confinement degradation. A… ▽ More The toroidal phase and rotation of otherwise locked magnetic islands of toroidal mode number n=1 are controlled in the DIII-D tokamak by means of applied magnetic perturbations of n=1. Pre-emptive perturbations were applied in feedforward to "catch" the mode as it slowed down and entrain it to the rotating field before complete locking, thus avoiding the associated major confinement degradation. Additionally, for the first time, the phase of the perturbation was optimized in real-time, in feedback with magnetic measurements, in order for the mode's phase to closely match a prescribed phase, as a function of time. Experimental results confirm the capability to hold the mode in a given fixed-phase or to rotate it at up to 20 Hzへるつ with good uniformity. The control coil currents utilized in the experiments agree with the requirements estimated by an electromechanical model. Moreover, controlled rotation at 20 Hzへるつ was combined with Electron Cyclotron Current Drive (ECCD) modulated at the same frequency. This is simpler than regulating the ECCD modulation in feedback with spontaneous mode rotation, and enables repetitive, reproducible ECCD deposition at or near the island O-point, X-point and locations in between, for careful studies of how this affects the island stability. Current drive was found to be radially misaligned relative to the island, and resulting growth and shrinkage of islands matched expectations of the Modified Rutherford Equation for some discharges presented here. Finally, simulations predict the as designed ITER 3D coils can entrain a small island at sub-10 Hzへるつ frequencies. △ Less

Submitted 15 January, 2018; originally announced January 2018.

Overdense microwave plasma heating in the CNT stellarator

Authors: K. C. Hammond, R. R. Diaz-Pacheco, A. Koehn, F. A. Volpe, Y. Wei

Abstract: Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the O-mode and, alternatively, with 6.5 kW in the extraordinary (X) mode. The temperature profiles peak at the plasma edge. This was ascribed to collisional damping… ▽ More Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the O-mode and, alternatively, with 6.5 kW in the extraordinary (X) mode. The temperature profiles peak at the plasma edge. This was ascribed to collisional damping of the X-mode at the upper hybrid resonant layer. The X-mode reaches that location by tunneling, mode-conversions or after polarization-scrambling reflections off the wall and in-vessel coils, regardless of the initial launch being in O- or X-mode. This interpretation was confirmed by full-wave numerical simulations. Also, as the CNT plasma is not completely ionized at these low microwave power levels, electron density was shown to increase with power. A dependence on magnetic field strength was also observed (for O-mode launch) and discussed. △ Less

Submitted 8 August, 2017; originally announced August 2017.

Comments: 24 pages, 12 figures

Passive and active electromagnetic stabilization of free-surface liquid metal flows

Authors: S. M. H. Mirhoseini, R. R. Diaz-Pacheco, F. A. Volpe

Abstract: Free-surface liquid metal flows tend to be uneven due to instabilities and other effects. Some applications, however, require constant, uniform liquid metal thickness. This is for example the case of liquid walls in nuclear fusion reactors. With this motivation, here we present experimental results on the stabilization of a free-surface flow of Galinstan. The flow was sustained by an electromagnet… ▽ More Free-surface liquid metal flows tend to be uneven due to instabilities and other effects. Some applications, however, require constant, uniform liquid metal thickness. This is for example the case of liquid walls in nuclear fusion reactors. With this motivation, here we present experimental results on the stabilization of a free-surface flow of Galinstan. The flow was sustained by an electromagnetic induction pump featuring rotating permanent magnets. Evidence is reported of the flowing Galinstan layer becoming flatter in the presence of a sufficiently strong magnetic field, either alone (passive stabilization) or in combination with an electrical current passing through the liquid metal (active stabilization). The results are interpreted in terms of an effective viscosity and effective gravity, respectively. △ Less

Submitted 3 February, 2017; originally announced February 2017.

Comments: 10 pages, 8 figures, accepted for publication in Magnetohydrodynamics (http://mhd.sal.lv) -special issue for 10th PAMIR Int.Conf.Fundam.& Applied MHD

Prospects for a dominantly microwave-diagnosed magnetically confined fusion reactor

Authors: Francesco A. Volpe

Abstract: Compared to present experiments, tokamak and stellarator reactors will be subject to higher heat loads, sputtering, erosion and subsequent coating, tritium retention, higher neutron fluxes, and a number of radiation effects. Additionally, neutral beam penetration in tokamak reactors will only be limited to the plasma edge. As a result, several optical, beam-based and magnetic diagnostics of today'… ▽ More Compared to present experiments, tokamak and stellarator reactors will be subject to higher heat loads, sputtering, erosion and subsequent coating, tritium retention, higher neutron fluxes, and a number of radiation effects. Additionally, neutral beam penetration in tokamak reactors will only be limited to the plasma edge. As a result, several optical, beam-based and magnetic diagnostics of today's plasmas might not be applicable to tomorrow's reactors, but the present discussion suggests that reactors could largely rely on microwave diagnostics, including techniques based on mode conversions and Collective Thomson Scattering. △ Less

Submitted 11 January, 2017; originally announced January 2017.

Comments: 13 pages, 3 tables. 4th International Conference Frontiers in Diagnostic Technologies, Frascati (Italy), 30 March - 1 April 2016

High-$βべーた$ equilibrium and ballooning stability of the low aspect ratio CNT stellarator

Authors: K. C. Hammond, S. A. Lazerson, F. A. Volpe

Abstract: The existence and ballooning-stability of low aspect ratio stellarator equilibria is predicted for CNT with the aid of 3D numerical tools. In addition to having a low aspect ratio, CNT is characterized by a low magnetic field and small plasma volume. Also, highly overdense plasmas were recently heated in CNT by means of microwaves. These characteristics suggest that CNT might attain relatively hig… ▽ More The existence and ballooning-stability of low aspect ratio stellarator equilibria is predicted for CNT with the aid of 3D numerical tools. In addition to having a low aspect ratio, CNT is characterized by a low magnetic field and small plasma volume. Also, highly overdense plasmas were recently heated in CNT by means of microwaves. These characteristics suggest that CNT might attain relatively high values of plasma $βべーた$ and thus be of use in the experimental study of stellarator stability to high-$βべーた$ instabilities such as ballooning modes. As a first step in that direction, here the ballooning stability limit is found numerically. Depending on the particular magnetic configuration we expect volume-averaged $βべーた$ limits in the range 0.9-3.0%, and possibly higher, and observe indications of a second region of ballooning stability. As the aspect ratio is reduced, stability is found to increase in some configurations and decrease in others. Energy-balance estimates using stellarator scaling laws indicate that the lower $βべーた$ limit may be attainable with overdense heating at powers of of 40 to 100 kW. The present study serves the additional purpose of testing VMEC and other stellarator codes at high values of $βべーた$ and at low aspect ratios. For this reason, the study was carried out both for free boundary, for maximum fidelity to experiment, as well as with a fixed boundary, as a numerical test. △ Less

Submitted 11 April, 2017; v1 submitted 29 December, 2016; originally announced December 2016.

Comments: 8 pages, 10 figures

Journal ref: Physics of Plasmas 24, 042510 (2017)

Statistical analysis of $m/n$ = 2/1 locked and quasi-stationary modes with rotating precursors at DIII-D

Authors: R. Sweeney, W. Choi, R. J. La Haye, S. Mao, K. E. J. Olofsson, F. A. Volpe, the DIII-D Team

Abstract: A database has been developed to study the evolution, the nonlinear effects on equilibria, and the disruptivity of locked and quasi-stationary modes with poloidal and toroidal mode numbers $m=2$ and $n=1$ at DIII-D. The analysis of 22,500 discharges shows that more than 18% of disruptions are due to locked or quasi-stationary modes with rotating precursors (not including born locked modes). A para… ▽ More A database has been developed to study the evolution, the nonlinear effects on equilibria, and the disruptivity of locked and quasi-stationary modes with poloidal and toroidal mode numbers $m=2$ and $n=1$ at DIII-D. The analysis of 22,500 discharges shows that more than 18% of disruptions are due to locked or quasi-stationary modes with rotating precursors (not including born locked modes). A parameter formulated by the plasma internal inductance $l_i$ divided by the safety factor at 95% of the poloidal flux, $q_{95}$, is found to exhibit predictive capability over whether a locked mode will cause a disruption or not, and does so up to hundreds of milliseconds before the disruption. Within 20 ms of the disruption, the shortest distance between the island separatrix and the unperturbed last closed flux surface, referred to as $d_{edge}$, performs comparably to $l_i/q_{95}$ in its ability to discriminate disruptive locked modes. Out of all parameters considered, $d_{edge}$ also correlates best with the duration of the locked mode. Within 50 ms of a locked mode disruption, average behavior includes exponential growth of the $n=1$ perturbed field, which might be due to the 2/1 locked mode. Even assuming the aforementioned 2/1 growth, disruptivity following a locked mode shows little dependence on island width up to 20 ms before the disruption. Separately, greater deceleration of the rotating precursor is observed when the wall torque is large. At locking, modes are often observed to align with a residual error field. Timescales associated with the mode evolution are also studied and dictate the response times necessary for disruption avoidance and mitigation. △ Less

Submitted 28 November, 2016; v1 submitted 13 June, 2016; originally announced June 2016.

Full-Wave Feasibility Study of Anti-Radar Diagnostic of Magnetic Field Based on O-X Mode Conversion and Oblique Reflectometry Imaging

Authors: O. Meneghini, F. A. Volpe

Abstract: An innovative millimeter wave diagnostic is proposed to measure the local magnetic field and edge current as a function of the minor radius in the tokamak pedestal region. The idea is to identify the direction of minimum reflectivity at the O-mode cutoff layer. Correspondingly, the transmissivity due to O-X mode conversion is maximum. That direction, and the angular map of reflectivity around it,… ▽ More An innovative millimeter wave diagnostic is proposed to measure the local magnetic field and edge current as a function of the minor radius in the tokamak pedestal region. The idea is to identify the direction of minimum reflectivity at the O-mode cutoff layer. Correspondingly, the transmissivity due to O-X mode conversion is maximum. That direction, and the angular map of reflectivity around it, contain information on the magnetic field vector B at the cutoff layer. Probing the plasma with different wave frequencies provides the radial profile of B. Full-wave finite-element simulations are presented here in 2D slab geometry. Modeling confirms the existence of a minimum in reflectivity that depends on the magnetic field at the cutoff, as expected from mode conversion physics, giving confidence in the feasibility of the diagnostic. The proposed reflectometric approach is expected to yield superior signal-to-noise ratio and to access wider ranges of density and magnetic field, compared with related radiometric techniques that require the plasma to emit Electron Bernstein Waves. Due to computational limitations, frequencies of 10-20 GHz were considered in this initial study. Frequencies above the edge electron-cyclotron frequency (f>28 GHz here) would be preferable for the experiment, because the upper hybrid resonance and right cutoff would lie in the plasma, and would help separate the O-mode of interest from spurious X-waves. △ Less

Submitted 13 June, 2016; originally announced June 2016.

Comments: 5 pages, 7 figures, High Temperature Plasma Diagnostics Conf., June 5-9, 2016, Madison, WI (USA)

Space- and Time-resolved Resistive Measurement of Liquid Metal Wall Thickness

Authors: S. M. H. Mirhoseini, F. A. Volpe

Abstract: In a fusion reactor internally coated with liquid metal, it will be important to diagnose the thickness of the liquid at various locations in the vessel, as a function of time, and possibly respond to counteract undesired bulging or depletion. The electrical conductance between electrodes immersed in the liquid metal can be used as a simple proxy for the local thickness. Here a matrix of electrode… ▽ More In a fusion reactor internally coated with liquid metal, it will be important to diagnose the thickness of the liquid at various locations in the vessel, as a function of time, and possibly respond to counteract undesired bulging or depletion. The electrical conductance between electrodes immersed in the liquid metal can be used as a simple proxy for the local thickness. Here a matrix of electrodes is shown to provide spatially resolved measurements of liquid metal thickness in the absence of plasma. First a theory is developed for mxn electrodes, and then it is experimentally demonstrated for 3x1 electrodes. The experiments were carried out with Galinstan, but are easily extended to Lithium or other liquid metals. △ Less

Submitted 13 July, 2016; v1 submitted 13 June, 2016; originally announced June 2016.

Comments: 4 pages, 2 figures

Onion-peeling inversion of stellarator images

Authors: K. C. Hammond, R. Diaz-Pacheco, Y. Kornbluth, F. A. Volpe, Y. Wei

Abstract: An onion-peeling technique is developed for inferring the emissivity profile of a stellarator plasma from a two-dimensional image acquired through a CCD or CMOS camera. Each pixel in the image is treated as an integral of emission along a particular line-of-sight. Additionally, the flux surfaces in the plasma are partitioned into discrete layers, each of which is assumed to have uniform emissivity… ▽ More An onion-peeling technique is developed for inferring the emissivity profile of a stellarator plasma from a two-dimensional image acquired through a CCD or CMOS camera. Each pixel in the image is treated as an integral of emission along a particular line-of-sight. Additionally, the flux surfaces in the plasma are partitioned into discrete layers, each of which is assumed to have uniform emissivity. If the topology of the flux surfaces is known, this construction permits the development of a system of linear equations that can be solved for the emissivity of each layer. We present initial results of this method applied to wide-angle visible images of the CNT stellarator plasma. △ Less

Submitted 12 July, 2016; v1 submitted 9 June, 2016; originally announced June 2016.

Comments: 5 pages, 6 figures

Journal ref: Review of Scientific Instruments 87, 11E119 (2016)

Resistive sensor and electromagnetic actuator for feedback stabilization of liquid metal walls in fusion reactors

Authors: S. M. H. Mirhoseini, F. A. Volpe

Abstract: Liquid metal walls in fusion reactors will be subject to instabilities, turbulence, induced currents, error fields and temperature gradients that will make them locally bulge, thus entering in contact with the plasma, or deplete, hence exposing the underlying solid substrate. To prevent this, research has begun to actively stabilize static or flowing liquid metal layers by locally applying forces… ▽ More Liquid metal walls in fusion reactors will be subject to instabilities, turbulence, induced currents, error fields and temperature gradients that will make them locally bulge, thus entering in contact with the plasma, or deplete, hence exposing the underlying solid substrate. To prevent this, research has begun to actively stabilize static or flowing liquid metal layers by locally applying forces in feedback with thickness measurements. Here we present resistive sensors of liquid metal thickness and demonstrate jxB actuators, to locally control it. △ Less

Submitted 17 August, 2016; v1 submitted 25 April, 2016; originally announced April 2016.

Comments: 17 pages, 8 figures, 20th Workshop on MHD Stability Control

Local measurement of error field using naturally rotating tearing mode dynamics in EXTRAP T2R

Authors: R. M. Sweeney, L. Frassinetti, P. Brunsell, R. Fridström, F. A. Volpe

Abstract: An error field (EF) detection technique using the amplitude modulation of a naturally rotating tearing mode (TM) is developed and validated in the EXTRAP T2R reversed field pinch. The technique was used to identify intrinsic EFs of $m/n = 1/-12$, where $m$ and $n$ are the poloidal and toroidal mode numbers. The effect of the EF and of a resonant magnetic perturbation (RMP) on the TM, in particular… ▽ More An error field (EF) detection technique using the amplitude modulation of a naturally rotating tearing mode (TM) is developed and validated in the EXTRAP T2R reversed field pinch. The technique was used to identify intrinsic EFs of $m/n = 1/-12$, where $m$ and $n$ are the poloidal and toroidal mode numbers. The effect of the EF and of a resonant magnetic perturbation (RMP) on the TM, in particular on amplitude modulation, is modeled with a first-order solution of the Modified Rutherford Equation. In the experiment, the TM amplitude is measured as a function of the toroidal angle as the TM rotates rapidly in the presence of an unknown EF and a known, deliberately applied RMP. The RMP amplitude is fixed while the toroidal phase is varied from one discharge to the other, completing a full toroidal scan. Using three such scans with different RMP amplitudes, the EF amplitude and phase are inferred from the phases at which the TM amplitude maximizes. The estimated EF amplitude is consistent with other estimates (e.g. based on the best EF-cancelling RMP, resulting in the fastest TM rotation). A passive variant of this technique is also presented, where no RMPs are applied, and the EF phase is deduced. △ Less

Submitted 4 June, 2016; v1 submitted 1 April, 2016; originally announced April 2016.

Comments: Submitted for publication in Plasma Physics and Controlled Fusion

Experimental and numerical study of error fields in the CNT stellarator

Authors: K. C. Hammond, A. Anichowski, P. W. Brenner, T. S. Pedersen, S. Raftopoulos, P. Traverso, F. A. Volpe

Abstract: Sources of error fields were indirectly inferred in a stellarator by reconciling computed and numerical flux surfaces. Sources considered so far include the displacements and tilts (but not the deformations, yet) of the four circular coils featured in the simple CNT stellarator. The flux surfaces were measured by means of an electron beam and phosphor rod, and were computed by means of a Biot-Sava… ▽ More Sources of error fields were indirectly inferred in a stellarator by reconciling computed and numerical flux surfaces. Sources considered so far include the displacements and tilts (but not the deformations, yet) of the four circular coils featured in the simple CNT stellarator. The flux surfaces were measured by means of an electron beam and phosphor rod, and were computed by means of a Biot-Savart field-line tracing code. If the ideal coil locations and orientations are used in the computation, agreement with measurements is poor. Discrepancies are ascribed to errors in the positioning and orientation of the in-vessel interlocked coils. To that end, an iterative numerical method was developed. A Newton-Raphson algorithm searches for the coils' displacements and tilts that minimize the discrepancy between the measured and computed flux surfaces. This method was verified by misplacing and tilting the coils in a numerical model of CNT, calculating the flux surfaces that they generated, and testing the algorithm's ability to deduce the coils' displacements and tilts. Subsequently, the numerical method was applied to the experimental data, arriving at a set of coil displacements whose resulting field errors exhibited significantly improved quantitative and qualitative agreement with experimental results. △ Less

Submitted 10 June, 2016; v1 submitted 15 February, 2016; originally announced February 2016.

Comments: Special Issue on the 20th International Stellarator-Heliotron Workshop

Journal ref: Plasma Physics and Controlled Fusion 58, 074002 (2016)

Avoiding Tokamak disruptions by applying static magnetic fields that align locked modes with stabilizing wave-driven currents

Authors: F. A. Volpe, A. Hyatt, R. J. La Haye, M. J. Lanctot, J. Lohr, R. Prater, E. J. Strait, A. Welander

Abstract: Non-rotating (`locked') magnetic islands often lead to complete losses of confinement in tokamak plasmas, called major disruptions. Here locked islands were suppressed for the first time, by a combination of applied three-dimensional magnetic fields and injected millimetre waves. The applied fields were used to control the phase of locking and so align the island O-point with the region where the… ▽ More Non-rotating (`locked') magnetic islands often lead to complete losses of confinement in tokamak plasmas, called major disruptions. Here locked islands were suppressed for the first time, by a combination of applied three-dimensional magnetic fields and injected millimetre waves. The applied fields were used to control the phase of locking and so align the island O-point with the region where the injected waves generated non-inductive currents. This resulted in stabilization of the locked island, disruption avoidance, recovery of high confinement and high pressure, in accordance with the expected dependencies upon wave power and relative phase between O-point and driven current. △ Less

Submitted 29 October, 2015; originally announced October 2015.

Comments: 4 figures

Journal ref: Phys. Rev. Lett. 115, 175002 (2015)

Huygens-Fresnel wavefront tracing in non-uniform media

Authors: F. A. Volpe, P. -D. Letourneau, A. Zhao

Abstract: We present preliminary results on a novel numerical method describing wave propagation in non-uniform media. Following Huygens-Fresnel' principle, we model the wavefront as an array of point sources that emit wavelets, which interfere. We then identify a set of new points where the electric field has equal phase. In fact, without losing generality, we find zeros of the electric field, by means of… ▽ More We present preliminary results on a novel numerical method describing wave propagation in non-uniform media. Following Huygens-Fresnel' principle, we model the wavefront as an array of point sources that emit wavelets, which interfere. We then identify a set of new points where the electric field has equal phase. In fact, without losing generality, we find zeros of the electric field, by means of the bisection method. This obviously corresponds to a specific phase-advance, but is easily generalized, e.g. by phase-shifting all sources. The points found form the new wavefront. One of the advantages of the method is that it includes diffraction. Two examples provided are diffraction around an obstacle and the finite waist of a focused Gaussian beam. Refraction is also successfully modeled, both in slowly-varying media as well as in the presence of discontinuities. The calculations were performed in two dimensions, but can be easily extended to three dimensions. We also discuss the extension to anisotropic, birefringent, absorbing media. △ Less

Submitted 12 June, 2016; v1 submitted 9 September, 2015; originally announced September 2015.

Comments: 20 pages, 6 figures

Conceptual design of first toroidal electron cyclotron resonance ion source and modeling of ion extraction from it

Authors: C. Caliri, D. Mascali, F. A. Volpe

Abstract: Electron Cyclotron Resonance Ion Sources (ECRIS) progressed to higher and higher ion currents and charge states by adopting stronger magnetic fields (beneficial for confinement) and proportionally higher ECR frequencies. Further improvements would require the attainment of "triple products" of density, temperature and confinement time comparable with major fusion experiments. For this, we propose… ▽ More Electron Cyclotron Resonance Ion Sources (ECRIS) progressed to higher and higher ion currents and charge states by adopting stronger magnetic fields (beneficial for confinement) and proportionally higher ECR frequencies. Further improvements would require the attainment of "triple products" of density, temperature and confinement time comparable with major fusion experiments. For this, we propose a new, toroidal rather than linear, ECRIS geometry, which would at the same time improve confinement and make better use of the magnetic field. Ion extraction is more complicated than from a linear device, but feasible, as our modelling suggests: single-particle tracings showed successful extraction by at least two techniques, making use respectively of a magnetic extractor and of ExB drifts. Additional techniques are briefly discussed. △ Less

Submitted 2 February, 2015; originally announced February 2015.

Comments: 17 pages, 10 figures. Revised manuscript submitted to Nucl. Instrum. Meth. A

Metamaterial lens of specifiable frequency-dependent focus and adjustable aperture for electron cyclotron emission in the DIII-D tokamak

Authors: K. C. Hammond, W. J. Capecchi, S. D. Massidda, F. A. Volpe

Abstract: Electron Cyclotron Emission (ECE) of different frequencies originates at different locations in non-uniformly magnetized plasmas. For simultaneous observation of multiple ECE frequencies from the outside edge of a toroidal plasma confinement device (e.g. a tokamak), the focal length of the collecting optics should increase with the frequency to maximize the resolution on a line of sight along the… ▽ More Electron Cyclotron Emission (ECE) of different frequencies originates at different locations in non-uniformly magnetized plasmas. For simultaneous observation of multiple ECE frequencies from the outside edge of a toroidal plasma confinement device (e.g. a tokamak), the focal length of the collecting optics should increase with the frequency to maximize the resolution on a line of sight along the magnetic field gradient. Here we present the design and numerical study of a zoned metamaterial lens with such characteristics, for possible deployment with the 83-130 GHz ECE radiometer in the DIII-D tokamak. The lens consists of a concentric array of miniaturized element phase-shifters. These were reverse-engineered starting from the desired Gaussian beam waist locations and further optimized to account for diffraction and finite-aperture effects that tend to displace the waist. At the same time we imposed high and uniform transmittance, averaged over all phase-shifters. The focal length is shown to increase from 1.37 m to 1.97 m over the frequency range of interest, as desired for low-field DIII-D discharges (B = -1.57 T). Retracting the lens to receded positions rigidly moves the waists accordingly, resulting in a good match -within a fraction of the Rayleigh length- of the EC-emitting layer positions at higher fields (up to B = -2.00 T). Further, it is shown how varying the lens aperture might move the waists "non-rigidly" to better match the non-rigid movement of the EC-emitting layers with the magnetic field. The numerical method presented is very general and can be used to engineer any dependence of the focal length on the frequency, including zero or minimal chromatic aberration. △ Less

Submitted 13 October, 2014; originally announced October 2014.

Comments: 18 pages, 9 figures, http://link.springer.com/article/10.1007%2Fs10762-013-9987-1

Journal ref: Journal of Infrared, Millimeter, and Terahertz Waves 34, 437 (2013)

Proto-CIRCUS Tilted-Coil Tokamak-Torsatron Hybrid: Design and Construction

Authors: A. W. Clark, M. Doumet, K. C. Hammond, Y. Kornbluth, D. A. Spong, R. Sweeney, F. A. Volpe

Abstract: We present the field-line modeling, design and construction of a prototype circular-coil tokamak-torsatron hybrid called Proto-CIRCUS. The device has a major radius R = 16 cm and minor radius a < 5 cm. The six "toroidal field" coils are planar as in a tokamak, but they are tilted. This, combined with induced or driven plasma current, is expected to generate rotational transform, as seen in field-l… ▽ More We present the field-line modeling, design and construction of a prototype circular-coil tokamak-torsatron hybrid called Proto-CIRCUS. The device has a major radius R = 16 cm and minor radius a < 5 cm. The six "toroidal field" coils are planar as in a tokamak, but they are tilted. This, combined with induced or driven plasma current, is expected to generate rotational transform, as seen in field-line tracing and equilibrium calculations. The device is expected to operate at lower plasma current than a tokamak of comparable size and magnetic field, which might have interesting implications for disruptions and steady-state operation. Additionally, the toroidal magnetic ripple is less pronounced than in an equivalent tokamak in which the coils are not tilted. The tilted coils are interlocked, resulting in a relatively low aspect ratio, and can be moved, both radially and in tilt angle, between discharges. This capability will be exploited for detailed comparisons between calculations and field-line mapping measurements. Such comparisons will reveal whether this relatively simple concept can generate the expected rotational transform. △ Less

Submitted 8 October, 2014; originally announced October 2014.

Comments: 10 pages, 10 figures, 1 table

Journal ref: Fusion Engineering and Design 89 (2014) 2732-2737

Multi-pole multi-zero frequency-independent phase-shifter

Authors: M. A. Bitar, A. Gallo, F. A. Volpe

Abstract: A multi-pole, multi-zero design allowed realizing a "true" phase-shifter (not time-delayer) of flat frequency-response over more than 3 decades (30Hzへるつ-100kHzきろへるつ), which can be extended to higher frequencies or broader bands thanks to a modular design. Frequency-dependent optimization of a single resistance made also the gain flat to within few percents. The frequency-independent phase-shifter presente… ▽ More A multi-pole, multi-zero design allowed realizing a "true" phase-shifter (not time-delayer) of flat frequency-response over more than 3 decades (30Hzへるつ-100kHzきろへるつ), which can be extended to higher frequencies or broader bands thanks to a modular design. Frequency-dependent optimization of a single resistance made also the gain flat to within few percents. The frequency-independent phase-shifter presented can find application in any experiment in which an action needs to be taken (e.g. a measurement needs to be performed) at a fixed phase-delay relative to an event, regardless of how rapidly the system rotates or oscillates. △ Less

Submitted 27 February, 2013; originally announced February 2013.

Comments: 4 pages, 7 figures

Journal ref: Rev. Sci. Instrum. 83, 114703 (2012)

Reverse Chromatic Aberration and its Numerical Optimization in a Metamaterial Lens

Authors: W. J. Capecchi, N. Behdad, F. A. Volpe

Abstract: In planar metamaterial lenses, the focal point moves with the frequency. Here it is shown numerically that this movement can be controlled by properly engineering the dimensions of the metamaterial-based phase shifters that constitute the lens. In particular, such lenses can be designed to exhibit unusual chromatic aberration with the focal length increasing, rather than decreasing, with the frequ… ▽ More In planar metamaterial lenses, the focal point moves with the frequency. Here it is shown numerically that this movement can be controlled by properly engineering the dimensions of the metamaterial-based phase shifters that constitute the lens. In particular, such lenses can be designed to exhibit unusual chromatic aberration with the focal length increasing, rather than decreasing, with the frequency. It is proposed that such an artificial "reverse" chromatic aberration may optimize the transverse resolution of millimeter wave diagnostics of plasmas and be useful in compensating for the natural "ordinary" chromatic aberration of other components in an optical system. More generally, optimized chromatic aberration will allow to simultaneously focus on several objects located at different distances and emitting or reflecting at different frequencies. △ Less

Submitted 27 February, 2013; originally announced February 2013.

Comments: 8 pages, 5 figures, 1 table

Journal ref: Optics Express 20, 8762 (2012)

Error Field Assessment from Driven Rotation of Stable External Kinks at EXTRAP-T2R Reversed Field Pinch

Authors: F. A. Volpe, L. Frassinetti, P. R. Brunsell, J. R. Drake, K. E. J. Olofsson

Abstract: A new non-disruptive error field (EF) assessment technique not restricted to low density and thus low beta was demonstrated at the EXTRAP-T2R reversed field pinch. Stable and marginally stable external kink modes of toroidal mode number n=10 and n=8, respectively, were generated, and their rotation sustained, by means of rotating magnetic perturbations of the same n. Due to finite EFs, and in spit… ▽ More A new non-disruptive error field (EF) assessment technique not restricted to low density and thus low beta was demonstrated at the EXTRAP-T2R reversed field pinch. Stable and marginally stable external kink modes of toroidal mode number n=10 and n=8, respectively, were generated, and their rotation sustained, by means of rotating magnetic perturbations of the same n. Due to finite EFs, and in spite of the applied perturbations rotating uniformly and having constant amplitude, the kink modes were observed to rotate non-uniformly and be modulated in amplitude. This behavior was used to precisely infer the amplitude and approximately estimate the toroidal phase of the EF. A subsequent scan permitted to optimize the toroidal phase. The technique was tested against deliberately applied as well as intrinsic error fields of n=8 and 10. Corrections equal and opposite to the estimated error fields were applied. The efficacy of the error compensation was indicated by the increased discharge duration and more uniform mode rotation in response to a uniformly rotating perturbation. The results are in good agreement with theory, and the extension to lower n, to tearing modes and to tokamaks, including ITER, is discussed. △ Less

Submitted 27 February, 2013; originally announced February 2013.

Comments: 21 pages, 16 figures

Magnetic Barriers and their q95 dependence at DIII-D

Authors: F. A. Volpe, J. Kessler, H. Ali, T. E. Evans, A. Punjabi

Abstract: It is well known that externally generated resonant magnetic perturbations (RMPs) can form islands in the plasma edge. In turn, large overlapping islands generate stochastic fields, which are believed to play a role in the avoidance and suppression of edge localized modes (ELMs) at DIII-D. However, large coalescing islands can also generate, in the middle of these stochastic regions, KAM surfaces… ▽ More It is well known that externally generated resonant magnetic perturbations (RMPs) can form islands in the plasma edge. In turn, large overlapping islands generate stochastic fields, which are believed to play a role in the avoidance and suppression of edge localized modes (ELMs) at DIII-D. However, large coalescing islands can also generate, in the middle of these stochastic regions, KAM surfaces effectively acting as "barriers" against field-line dispersion and, indirectly, particle diffusion. It was predicted in [H. Ali and A. Punjabi, Plasma Phys. Control. Fusion 49 (2007), 1565-1582] that such magnetic barriers can form in piecewise analytic DIII-D plasma equilibria. In the present work, the formation of magnetic barriers at DIII-D is corroborated by field-line tracing calculations using experimentally constrained EFIT [L. Lao, et al., Nucl. Fusion 25, 1611 (1985)] DIII-D equilibria perturbed to include the vacuum field from the internal coils utilized in the experiments. According to these calculations, the occurrence and location of magnetic barriers depends on the edge safety factor q95. It was thus suggested that magnetic barriers might contribute to narrowing the edge stochastic layer and play an indirect role in the RMPs failing to control ELMs for certain values of q95. The analysis of DIII-D discharges where q95 was varied, however, does not show anti-correlation between barrier formation and ELM suppression. △ Less

Submitted 8 November, 2011; originally announced November 2011.

Full-wave modeling of the O-X mode conversion in the Pegasus Toroidal Experiment

Authors: Alf Köhn, Jonathan Jacquot, Michael W. Bongard, Sara Gallian, Edward T. Hinson, Francesco A. Volpe

Abstract: The ordinary-extraordinary (O-X) mode conversion is modeled with the aid of a 2D full-wave code in the Pegasus Toroidal Experiment as a function of the launch angles. It is shown how the shape of the plasma density profile in front of the antenna can significantly influence the mode conversion efficiency and, thus, the generation of electron Bernstein waves (EBW). It is therefore desirable to cont… ▽ More The ordinary-extraordinary (O-X) mode conversion is modeled with the aid of a 2D full-wave code in the Pegasus Toroidal Experiment as a function of the launch angles. It is shown how the shape of the plasma density profile in front of the antenna can significantly influence the mode conversion efficiency and, thus, the generation of electron Bernstein waves (EBW). It is therefore desirable to control the density profile in front of the antenna for successful operation of an EBW heating and current drive system. On the other hand, the conversion efficiency is shown to be resilient to vertical displacements of the plasma as large as \pm 10 cm. △ Less

Submitted 6 June, 2016; v1 submitted 5 April, 2011; originally announced April 2011.

Comments: 11 figures

Journal ref: Phys. Plasmas 18, 082501 (2011)