Showing 1–18 of 18 results for author: Weber, D

Clinical utility of automatic treatment planning for proton therapy of head-and-neck cancer patients using JulianA

Authors: Renato Bellotti, Alexey Cherchik, Jonas Willmann, A. Lomax, Damien Charles Weber, Jan Hrbacek

Abstract: Background: Automatic treatment planning promises many benefits for both research and clinical environments. For clinics, autoplanning promises to reduce planning time and achieve more comparable treatment plans and thereby reduce inter-planner variability. Further, it can assist clinicians in quality assurance by providing a minimum plan quality standard. Finally, autoplanning is an essential par… ▽ More Background: Automatic treatment planning promises many benefits for both research and clinical environments. For clinics, autoplanning promises to reduce planning time and achieve more comparable treatment plans and thereby reduce inter-planner variability. Further, it can assist clinicians in quality assurance by providing a minimum plan quality standard. Finally, autoplanning is an essential part of patient selection, which is crucial for the advancement of proton therapy itself. Methods: A retrospective planning study using a cohort of 17 head-and-neck cancer patients treated at our institute. The clinically accepted plans created by dosimetrists (d-plans) were compared to automatically generated JulianA plans (j-plans). Both methods used the same beam arrangement. The plans were analysed by two expert reviewers without knowing how each plan was created. They assessed the plan quality and stated a preference. Results: All of the j-plans were deemed rather or clearly acceptable, resulting in a higher acceptability than the d-plans. The j-plan was considered superior in 14 (82.4%) cases, of equal quality for 1 (5.9%) and inferior to the d-plan for only 2 (11.8%) of the cases. The reviewers concluded that JulianA achieves more conformal dose distributions for the 15 (88.2%) cases where the j-plans were at least as good as the d-plans. Conclusions: The results show that the JulianA is ready to be used as a clinical quality assurance tool and research platform at our institute. While these results are encouraging, further research is needed to reduce the number of spots further and introduce robustness considerations into the optimisation algorithm in order to employ it on a daily basis for patient treatment. △ Less

Submitted 1 June, 2024; originally announced June 2024.

Diffusion Schrödinger Bridge Models for High-Quality MR-to-CT Synthesis for Head and Neck Proton Treatment Planning

Authors: Muheng Li, Xia Li, Sairos Safai, Damien Weber, Antony Lomax, Ye Zhang

Abstract: In recent advancements in proton therapy, MR-based treatment planning is gaining momentum to minimize additional radiation exposure compared to traditional CT-based methods. This transition highlights the critical need for accurate MR-to-CT image synthesis, which is essential for precise proton dose calculations. Our research introduces the Diffusion Schrödinger Bridge Models (DSBM), an innovative… ▽ More In recent advancements in proton therapy, MR-based treatment planning is gaining momentum to minimize additional radiation exposure compared to traditional CT-based methods. This transition highlights the critical need for accurate MR-to-CT image synthesis, which is essential for precise proton dose calculations. Our research introduces the Diffusion Schrödinger Bridge Models (DSBM), an innovative approach for high-quality MR-to-CT synthesis. DSBM learns the nonlinear diffusion processes between MR and CT data distributions. This method improves upon traditional diffusion models by initiating synthesis from the prior distribution rather than the Gaussian distribution, enhancing both generation quality and efficiency. We validated the effectiveness of DSBM on a head and neck cancer dataset, demonstrating its superiority over traditional image synthesis methods through both image-level and dosimetric-level evaluations. The effectiveness of DSBM in MR-based proton treatment planning highlights its potential as a valuable tool in various clinical scenarios. △ Less

Submitted 30 June, 2024; v1 submitted 17 April, 2024; originally announced April 2024.

Comments: International Conference on the use of Computers in Radiation therapy (ICCR)

Calibrating coordinate system alignment in a scanning transmission electron microscope using a digital twin

Authors: Dieter Weber, David Landers, Chen Huang, Emanuela Liberti, Emiliya Poghosyan, Matthew Bryan, Alexander Clausen, Daniel G. Stroppa, Angus I. Kirkland, Elisabeth Müller, Andrew Stewart, Rafal E. Dunin-Borkowski

Abstract: In four-dimensional scanning transmission electron microscopy (4D STEM) a focused beam is scanned over a specimen and a diffraction pattern is recorded at each position using a pixelated detector. During the experiment, it must be ensured that the scan coordinate system of the beam is correctly calibrated relative to the detector coordinate system. Various simplified and approximate models are use… ▽ More In four-dimensional scanning transmission electron microscopy (4D STEM) a focused beam is scanned over a specimen and a diffraction pattern is recorded at each position using a pixelated detector. During the experiment, it must be ensured that the scan coordinate system of the beam is correctly calibrated relative to the detector coordinate system. Various simplified and approximate models are used implicitly and explicitly for understanding and analyzing the recorded data, requiring translation between the physical reality of the instrument and the abstractions used in data interpretation. Here, we introduce a calibration method where interactive live data processing in combination with a digital twin is used to match a set of models and their parameters with the action of a real-world instrument. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Exciplex-driven blue OLEDs: unlocking multifunctionality applications

Authors: Dominik Weber, Annika Morgenstern, Daniel Beer, Dietrich R. T. Zahn, Carsten Deibel, Georgeta Salvan, Daniel Schondelmaier

Abstract: We present the development of multifunctional blue-emission organic light-emitting diodes (OLEDs) using TADF-exciplex materials. These OLEDs exhibit sensitivity to external stimuli and achieve a maximum external quantum efficiency (EQE) of 11.6 % through partly liquid processing. This technique allows for large-scale production on arbitrary geometries. The potential multifunctionality of the dev… ▽ More We present the development of multifunctional blue-emission organic light-emitting diodes (OLEDs) using TADF-exciplex materials. These OLEDs exhibit sensitivity to external stimuli and achieve a maximum external quantum efficiency (EQE) of 11.6 % through partly liquid processing. This technique allows for large-scale production on arbitrary geometries. The potential multifunctionality of the devices arises from their response to low external magnetic fields (up to 100 mT) with an efficiency up to 2.5 % for magnetoconductance, while maximum magneto-electroluminescence effects of 4.1 % were detected. We investigated novel aspects, including the utilization of two organic materials without further doping and the investigation of the impact of 2,2',2''-(1,3,5-Benzinetriyl)-tris(1phenyl-1-H-benzimidazole) (TPBi) processing in liquid and vapor form. The insights gained provide a fundamental understanding regarding the applicability of exciplex (EX) materials for fully solution-processed OLEDs through a deliberate omission of doping. Our work represents a significant advancement on the path towards multifunctional OLED technology, with potential applications in cost-efficient, scalable organic full-color displays and advanced sensing system △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 25 pages manuscript, 3 pages supplementary information

Neural Graphics Primitives-based Deformable Image Registration for On-the-fly Motion Extraction

Authors: Xia Li, Fabian Zhang, Muheng Li, Damien Weber, Antony Lomax, Joachim Buhmann, Ye Zhang

Abstract: Intra-fraction motion in radiotherapy is commonly modeled using deformable image registration (DIR). However, existing methods often struggle to balance speed and accuracy, limiting their applicability in clinical scenarios. This study introduces a novel approach that harnesses Neural Graphics Primitives (NGP) to optimize the displacement vector field (DVF). Our method leverages learned primitives… ▽ More Intra-fraction motion in radiotherapy is commonly modeled using deformable image registration (DIR). However, existing methods often struggle to balance speed and accuracy, limiting their applicability in clinical scenarios. This study introduces a novel approach that harnesses Neural Graphics Primitives (NGP) to optimize the displacement vector field (DVF). Our method leverages learned primitives, processed as splats, and interpolates within space using a shallow neural network. Uniquely, it enables self-supervised optimization at an ultra-fast speed, negating the need for pre-training on extensive datasets and allowing seamless adaptation to new cases. We validated this approach on the 4D-CT lung dataset DIR-lab, achieving a target registration error (TRE) of 1.15\pm1.15 mm within a remarkable time of 1.77 seconds. Notably, our method also addresses the sliding boundary problem, a common challenge in conventional DIR methods. △ Less

Submitted 8 February, 2024; originally announced February 2024.

A Unified Generation-Registration Framework for Improved MR-based CT Synthesis in Proton Therapy

Authors: Xia Li, Renato Bellotti, Barbara Bachtiary, Jan Hrbacek, Damien C. Weber, Antony J. Lomax, Joachim M. Buhmann, Ye Zhang

Abstract: Background: In MR-guided proton therapy planning, aligning MR and CT images is key for MR-based CT synthesis, especially in mobile regions like the head-and-neck. Misalignments here can lead to less accurate synthetic CT (sCT) images, impacting treatment precision. Purpose: This study introduces a novel network that cohesively unifies image generation and registration processes to enhance the qual… ▽ More Background: In MR-guided proton therapy planning, aligning MR and CT images is key for MR-based CT synthesis, especially in mobile regions like the head-and-neck. Misalignments here can lead to less accurate synthetic CT (sCT) images, impacting treatment precision. Purpose: This study introduces a novel network that cohesively unifies image generation and registration processes to enhance the quality and anatomical fidelity of sCTs derived from better-aligned MR images. Methods: The approach synergizes a generation network (G) with a deformable registration network (R), optimizing them jointly in MR-to-CT synthesis. This goal is achieved by alternately minimizing the discrepancies between the generated/registered CT images and their corresponding reference CT counterparts. The generation network employs a UNet architecture, while the registration network leverages an implicit neural representation of the Deformable Vector Fields (DVFs). We validated this method on a dataset comprising 60 Head-and-Neck patients, reserving 12 cases for holdout testing. Results: Compared to the baseline Pix2Pix method with MAE 124.95\pm 30.74 HU, the proposed technique demonstrated 80.98\pm 7.55 HU. The unified translation-registration network produced sharper and more anatomically congruent outputs, showing superior efficacy in converting MR images to sCTs. Additionally, from a dosimetric perspective, the plan recalculated on the resulting sCTs resulted in a remarkably reduced discrepancy to the reference proton plans. Conclusions: This study conclusively demonstrates that a holistic MR-based CT synthesis approach, integrating both image-to-image translation and deformable registration, significantly improves the precision and quality of sCT generation, particularly for the challenging body area with varied anatomic changes between corresponding MR and CT. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Live Iterative Ptychography

Authors: Dieter Weber, Simeon Ehrig, Andreas Schropp, Alexander Clausen, Silvio Achilles, Nico Hoffmann, Michael Bussmann, Rafal Dunin-Borkowski, Christian G. Schroer

Abstract: We demonstrate live-updating ptychographic reconstruction with ePIE, an iterative ptychography method, during ongoing data acquisition. The reconstruction starts with a small subset of the total data, and as the acquisition proceeds the data used for reconstruction is extended. This creates a live-updating view of object and illumination that allows monitoring the ongoing experiment and adjusting… ▽ More We demonstrate live-updating ptychographic reconstruction with ePIE, an iterative ptychography method, during ongoing data acquisition. The reconstruction starts with a small subset of the total data, and as the acquisition proceeds the data used for reconstruction is extended. This creates a live-updating view of object and illumination that allows monitoring the ongoing experiment and adjusting parameters with quick turn-around. This is particularly advantageous for long-running acquisitions. We show that such a gradual reconstruction yields interpretable results already with a small subset of the data. We show simulated live processing with various scan patterns, parallelized reconstruction, and real-world live processing at the hard X-ray ptychographic nanoanalytical microscope PtyNAMi at the PETRA III beamline. △ Less

Submitted 5 February, 2024; v1 submitted 21 August, 2023; originally announced August 2023.

Platinum-based Catalysts for Oxygen Reduction Reaction simulated with a Quantum Computer

Authors: Cono Di Paola, Evgeny Plekhanov, Michal Krompiec, Chandan Kumar, Emanuele Marsili, Fengmin Du, Daniel Weber, Jasper Simon Krauser, Elvira Shishenina, David Muñoz Ramo

Abstract: Hydrogen has emerged as a promising energy source, holding the key to achieve low-carbon and sustainable mobility. However, its applications are still limited by modest conversion efficiency in the electrocatalytic oxygen reduction reaction (ORR) within fuel cells. Consequently, the development of novel catalysts and a profound understanding of the underlying reactions have become of paramount imp… ▽ More Hydrogen has emerged as a promising energy source, holding the key to achieve low-carbon and sustainable mobility. However, its applications are still limited by modest conversion efficiency in the electrocatalytic oxygen reduction reaction (ORR) within fuel cells. Consequently, the development of novel catalysts and a profound understanding of the underlying reactions have become of paramount importance. The complex nature of the ORR potential energy landscape and the presence of strong electronic correlations present challenges to atomistic modelling using classical computers. This scenario opens new avenues for the implementation of novel quantum computing workflows to address these molecular systems. Here, we present a pioneering study that combines classical and quantum computational approaches to investigate the ORR on pure platinum and platinum/cobalt surfaces. Our research demonstrates, for the first time, the feasibility of implementing this workflow on the H1-series trapped-ion quantum computer and identify the challenges of the quantum chemistry modelling of this reaction. The results highlight the involvement of strongly correlated species in the cobalt-containing catalyst, suggesting their potential as ideal candidates for showcasing quantum advantage in future applications. △ Less

Submitted 12 April, 2024; v1 submitted 28 July, 2023; originally announced July 2023.

Comments: Main paper: 29 pages, 4 figures, Supplementary Material: 10 pages, 5 figures, 5 tables

JulianA: An automatic treatment planning platform for intensity-modulated proton therapy and its application to intra- and extracerebral neoplasms

Authors: Renato Bellotti, Jonas Willmann, Antony J. Lomax, Andreas Adelmann, Damien C. Weber, Jan Hrbacek

Abstract: Creating high quality treatment plans is crucial for a successful radiotherapy treatment. However, it demands substantial effort and special training for dosimetrists. Existing automated treatment planning systems typically require either an explicit prioritization of planning objectives, human-assigned objective weights, large amounts of historic plans to train an artificial intelligence or long… ▽ More Creating high quality treatment plans is crucial for a successful radiotherapy treatment. However, it demands substantial effort and special training for dosimetrists. Existing automated treatment planning systems typically require either an explicit prioritization of planning objectives, human-assigned objective weights, large amounts of historic plans to train an artificial intelligence or long planning times. Many of the existing auto-planning tools are difficult to extend to new planning goals. A new spot weight optimisation algorithm, called JulianA, was developed. The algorithm minimises a scalar loss function that is built only based on the prescribed dose to the tumour and organs at risk (OARs), but does not rely on historic plans. The objective weights in the loss function have default values that do not need to be changed for the patients in our dataset. The system is a versatile tool for researchers and clinicians without specialised programming skills. Extending it is as easy as adding an additional term to the loss function. JulianA was validated on a dataset of 19 patients with intra- and extracerebral neoplasms within the cranial region that had been treated at our institute. For each patient, a reference plan which was delivered to the cancer patient, was exported from our treatment database. Then JulianA created the auto plan using the same beam arrangement. The reference and auto plans were given to a blinded independent reviewer who assessed the acceptability of each plan, ranked the plans and assigned the human-/machine-made labels. The auto plans were considered acceptable in 16 out of 19 patients and at least as good as the reference plan for 11 patients. Whether a plan was crafted by a dosimetrist or JulianA was only recognised for 9 cases. The median time for the spot weight optimisation is approx. 2 min (range: 0.5 min - 7 min). △ Less

Submitted 15 December, 2023; v1 submitted 17 May, 2023; originally announced May 2023.

Feasibility of the J-PET to monitor range of therapeutic proton beams

Authors: Jakub Baran, Damian Borys, Karol Brzeziński, Jan Gajewski, Michał Silarski, Neha Chug, Aurélien Coussat, Eryk Czerwiński, Meysam Dadgar, Kamil Dulski, Kavya V. Eliyan, Aleksander Gajos Krzysztof Kacprzak, Łukasz Kapłon, Konrad Klimaszewski, Paweł Konieczka, Renata Kopeć, Grzegorz Korcyl, Tomasz Kozik, Wojciech Krzemień, Deepak Kumar, Antony J. Lomax, Keegan McNamara, Szymon Niedźwiecki, Paweł Olko, Dominik Panek , et al. (18 additional authors not shown)

Abstract: Objective: The aim of this work is to investigate the feasibility of the Jagiellonian Positron Emission Tomography (J-PET) scanner for intra-treatment proton beam range monitoring. Approach: The Monte Carlo simulation studies with GATE and PET image reconstruction with CASToR were performed in order to compare six J-PET scanner geometries (three dual-heads and three cylindrical). We simulated prot… ▽ More Objective: The aim of this work is to investigate the feasibility of the Jagiellonian Positron Emission Tomography (J-PET) scanner for intra-treatment proton beam range monitoring. Approach: The Monte Carlo simulation studies with GATE and PET image reconstruction with CASToR were performed in order to compare six J-PET scanner geometries (three dual-heads and three cylindrical). We simulated proton irradiation of a PMMA phantom with a Single Pencil Beam (SPB) and Spread-Out Bragg Peak (SOBP) of various ranges. The sensitivity and precision of each scanner were calculated, and considering the setup's cost-effectiveness, we indicated potentially optimal geometries for the J-PET scanner prototype dedicated to the proton beam range assessment. Main results: The investigations indicate that the double-layer cylindrical and triple-layer double-head configurations are the most promising for clinical application. We found that the scanner sensitivity is of the order of 10$^{-5}$ coincidences per primary proton, while the precision of the range assessment for both SPB and SOBP irradiation plans was found below 1 mm. Among the scanners with the same number of detector modules, the best results are found for the triple-layer dual-head geometry. Significance: We performed simulation studies demonstrating that the feasibility of the J-PET detector for PET-based proton beam therapy range monitoring is possible with reasonable sensitivity and precision enabling its pre-clinical tests in the clinical proton therapy environment. Considering the sensitivity, precision and cost-effectiveness, the double-layer cylindrical and triple-layer dual-head J-PET geometry configurations seem promising for the future clinical application. Experimental tests are needed to confirm these findings. △ Less

Submitted 28 February, 2023; originally announced February 2023.

Comments: 19 pages, 7 pages

Universal and dynamic ridge filter for pencil beam scanning particle therapy: novel concept for ultra-fast treatment delivery

Authors: Vivek Maradia, Isabella Colizzi, David Meer, Damien Charles Weber, Antony John Lomax, Oxana Actis, Serena Psoroulas

Abstract: Purpose In PBS particle therapy, short treatment delivery time is paramount for the efficient treatment of moving targets with motion mitigation techniques (such as breath-hold, rescanning, and gating). Energy and spot position change time are limiting factors in reducing treatment time. In this study, we designed a universal and dynamic energy modulator (ridge filter, RF) to broaden the Bragg pea… ▽ More Purpose In PBS particle therapy, short treatment delivery time is paramount for the efficient treatment of moving targets with motion mitigation techniques (such as breath-hold, rescanning, and gating). Energy and spot position change time are limiting factors in reducing treatment time. In this study, we designed a universal and dynamic energy modulator (ridge filter, RF) to broaden the Bragg peak, to reduce the number of energies and spots required to cover the target volume, thus lowering the treatment time. Methods Our RF unit comprises two identical RFs placed just before the isocenter. Both RFs move relative to each other, changing the Bragg peaks characteristics dynamically. We simulated different Bragg peak shapes with the RF in TOPAS and validated them experimentally. We then delivered single-field plans with 1Gy/fraction to different geometrical targets in water, to measure the dose delivery time using the RF and compare it with the clinical settings. Results Aligning the RFs in different positions produces different broadening in the Bragg peak; we achieved a maximum broadening of 2 cm. With RF we reduced the number of energies in a field by more than 60%, and the dose delivery time by 50%, for all geometrical targets investigated, without compromising the dose distribution transverse and distal fall-off. Conclusions Our novel universal and dynamic RF allows for the adaptation of the Bragg peak broadening for a spot and/or energy layer based on the requirement of dose shaping in the target volume. It significantly reduces the number of energy layers and spots to cover the target volume, and thus the treatment time. This RF design is ideal for ultra-fast treatment delivery within a single breath-hold (5-10 sec), efficient delivery of motion mitigation techniques, and small animal irradiation with ultra-high dose rates (FLASH). △ Less

Submitted 13 August, 2022; originally announced August 2022.

Comments: 18 pages, 9 figures

Inverse Multislice Ptychography by Layer-wise Optimisation and Sparse Matrix Decomposition

Authors: Arya Bangun, Oleh Melnyk, Benjamin März, Benedikt Diederichs, Alexander Clausen, Dieter Weber, Frank Filbir, Knut MÜller-Caspary

Abstract: We propose algorithms based on an optimisation method for inverse multislice ptychography in, e.g. electron microscopy. The multislice method is widely used to model the interaction between relativistic electrons and thick specimens. Since only the intensity of diffraction patterns can be recorded, the challenge in applying inverse multislice ptychography is to uniquely reconstruct the electrostat… ▽ More We propose algorithms based on an optimisation method for inverse multislice ptychography in, e.g. electron microscopy. The multislice method is widely used to model the interaction between relativistic electrons and thick specimens. Since only the intensity of diffraction patterns can be recorded, the challenge in applying inverse multislice ptychography is to uniquely reconstruct the electrostatic potential in each slice up to some ambiguities. In this conceptual study, we show that a unique separation of atomic layers for simulated data is possible when considering a low acceleration voltage. We also introduce an adaptation for estimating the illuminating probe. For the sake of practical application, we finally present slice reconstructions using experimental 4D scanning transmission electron microscopy (STEM) data. △ Less

Submitted 8 May, 2022; originally announced May 2022.

Journal ref: IEEE Transactions on Computational Imaging (2022)

Automatic alignment of an orbital angular momentum sorter in a transmission electron microscope using a convolution neural network

Authors: P. Rosi, A. Clausen, D. Weber, A. H. Tavabi, S. Frabboni, P. Tiemeijer, R. E. Dunin-Borkowski, E. Rotunno, V. Grillo

Abstract: We report on the automatic alignment of a transmission electron microscope equipped with an orbital angular momentum sorter using a convolutional neural network. The neural network is able to control all relevant parameters of both the electron-optical setup of the microscope and the external voltage source of the sorter without input from the user. It is able to compensate for mechanical and opti… ▽ More We report on the automatic alignment of a transmission electron microscope equipped with an orbital angular momentum sorter using a convolutional neural network. The neural network is able to control all relevant parameters of both the electron-optical setup of the microscope and the external voltage source of the sorter without input from the user. It is able to compensate for mechanical and optical misalignments of the sorter, in order to optimize its spectral resolution. The alignment is completed over a few frames and can be kept stable by making use of the fast fitting time of the neural network. △ Less

Submitted 7 April, 2022; v1 submitted 9 November, 2021; originally announced November 2021.

Live processing of momentum-resolved STEM data for first moment imaging and ptychography

Authors: Achim Strauch, Dieter Weber, Alexander Clausen, Anastasiia Lesnichaia, Arya Bangun, Benjamin März, Feng Jiao Lyu, Qing Chen, Andreas Rosenauer, Rafal Dunin-Borkowski, Knut Müller-Caspary

Abstract: A reformulated implementation of single-sideband ptychography enables analysis and display of live detector data streams in 4D scanning transmission electron microscopy (STEM) using the LiberTEM open-source platform. This is combined with live first moment and further virtual STEM detector analysis. Processing of both real experimental and simulated data shows the characteristics of this method wh… ▽ More A reformulated implementation of single-sideband ptychography enables analysis and display of live detector data streams in 4D scanning transmission electron microscopy (STEM) using the LiberTEM open-source platform. This is combined with live first moment and further virtual STEM detector analysis. Processing of both real experimental and simulated data shows the characteristics of this method when data is processed progressively, as opposed to the usual offline processing of a complete dataset. In particular, the single side band method is compared to other techniques such as the enhanced ptychographic engine in order to ascertain its capability for structural imaging at increased specimen thickness. Qualitatively interpretable live results are obtained also if the sample is moved, or magnification is changed during the analysis. This allows live optimization of instrument as well as specimen parameters during the analysis. The methodology is especially expected to improve contrast- and dose-efficient in-situ imaging of weakly scattering specimens, where fast live feedback during the experiment is required. △ Less

Submitted 17 August, 2021; v1 submitted 25 June, 2021; originally announced June 2021.

Comments: 14 pages, 11 figures. Achim Strauch and Dieter Weber contributed equally to this work and share first-authorship. Corresponding Author: Achim Strauch

Journal ref: Microscopy and Microanalysis, 1-15 (2021)

Commissioning of a clinical pencil beam scanning proton therapy unit for ultrahigh dose rates (FLASH)

Authors: K. P. Nesteruk, M. Togno, M. Grossmann, A. J. Lomax, D. C. Weber, J. M. Schippers, S. Safai, D. Meer, S. Psoroulas

Abstract: Purpose: The purpose of this work was to provide a flexible platform for FLASH research with protons by adapting a former clinical pencil beam scanning gantry to irradiations with ultrahigh dose rates. Methods: PSI Gantry 1 treated patients until December 2018. We optimized the beamline parameters to transport the 250 MeV beam extracted from the PSI COMET accelerator to the treatment room, maxim… ▽ More Purpose: The purpose of this work was to provide a flexible platform for FLASH research with protons by adapting a former clinical pencil beam scanning gantry to irradiations with ultrahigh dose rates. Methods: PSI Gantry 1 treated patients until December 2018. We optimized the beamline parameters to transport the 250 MeV beam extracted from the PSI COMET accelerator to the treatment room, maximizing the transmission of beam intensity to the sample. We characterized a dose monitor on the gantry to ensure good control of the dose, delivered in spot-scanning mode. We characterized the beam for different dose rates and field sizes for transmission irradiations. We explored scanning possibilities in order to enable conformal irradiations or transmission irradiations of large targets (with transverse scanning). Results: We achieved a transmission of 86 % from the cyclotron to the treatment room. We reached a peak dose rate of 9000 Gy/s at 3 mm water equivalent depth, along the central axis of a single pencil beam. Field sizes of up to 5x5 mm$^{2}$ were achieved for single spot FLASH irradiations. Fast transverse scanning allowed to cover a field of 16x1.2 cm$^{2}$. With the use of a nozzle-mounted range shifter we are able to span depths in water ranging from 19.6 to 37.9 cm. Various dose levels were delivered with a precision within less than 1 %. Conclusions: We have realized a proton FLASH irradiation setup able to investigate continuously a wide dose rate spectrum, from 1 to 9000 Gy/s in a single spot irradiation as well as in the pencil beam scanning mode. As such, we have developed a versatile test bench for FLASH research. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Comments: Submitted to Medical Physics

Journal ref: Med. Phys. 48, 4017-4026 (2021)

Mapping the Future of Particle Radiobiology in Europe: The INSPIRE Project

Authors: N. T. Henthorn, O. Sokol, M. Durante, L. De Marzi, F. Pouzoulet, J. Miszczyk, P. Olko, S. Brandenburg, M-J. van Goethem, L. Barazzuol, M. Tambas, J. A. Langendijk, M. Davidkova, V. Vondravcek, E. Bodenstein, J. Pawelke, A. Lomax, D. C. Weber, A. Dasu, B. Stenerlow, P. R. Poulsen, B. S. Sorensen, C. Grau, M. K. Sitarz, A-C Heuskin , et al. (5 additional authors not shown)

Abstract: Particle therapy is a growing cancer treatment modality worldwide. However, there still remains a number of unanswered questions considering differences in the biological response between particles and photons. These questions, and probing of biological mechanisms in general, necessitate experimental investigation. The Infrastructure in Proton International Research (INSPIRE) project was created t… ▽ More Particle therapy is a growing cancer treatment modality worldwide. However, there still remains a number of unanswered questions considering differences in the biological response between particles and photons. These questions, and probing of biological mechanisms in general, necessitate experimental investigation. The Infrastructure in Proton International Research (INSPIRE) project was created to provide an infrastructure for European research, unify research efforts on the topic of proton and ion therapy across Europe, and to facilitate the sharing of information and resources. This work highlights the radiobiological capabilities of the INSPIRE partners, providing details of physics (available particle types and energies), biology (sample preparation and post-irradiation analysis), and researcher access (the process of applying for beam time). The collection of information reported here is designed to provide researchers both in Europe and worldwide with the tools required to select the optimal center for their research needs. We also highlight areas of redundancy in capabilities and suggest areas for future investment. △ Less

Submitted 7 July, 2020; originally announced July 2020.

Comments: 18 pages

Next-Generation Information Technology Systems for Fast Detectors in Electron Microscop

Authors: Dieter Weber, Alexander Clausen, Rafal E. Dunin-Borkowski

Abstract: The Gatan K2 IS direct electron detector (Gatan Inc., 2018), which was introduced in 2014, marked a watershed moment in the development of cameras for transmission electron microscopy (TEM) (Pan & Czarnik, 2016). Its pixel frequency, i.e. the number of data points (pixels) recorded per second, was two orders of magnitude higher than the fastest cameras available only five years before. Starting fr… ▽ More The Gatan K2 IS direct electron detector (Gatan Inc., 2018), which was introduced in 2014, marked a watershed moment in the development of cameras for transmission electron microscopy (TEM) (Pan & Czarnik, 2016). Its pixel frequency, i.e. the number of data points (pixels) recorded per second, was two orders of magnitude higher than the fastest cameras available only five years before. Starting from 2009, the data rate of TEM cameras has outpaced the development of network, mass storage and memory bandwidth by almost two orders of magnitude. Consequently, solutions based on personal computers (PCs) that were adequate until then are no longer able to handle the resulting data rates. Instead, tailored high-performance setups are necessary. Similar developments have occurred for advanced X-ray sources such as the European XFEL, requiring special information technology (IT) systems for data handling (Sauter, Hattne, Grosse-Kunstleve, & Echols, 2013) (Fangohr, et al., 2018). Information and detector technology are currently under rapid development and involve disruptive technological innovations. This chapter briefly reviews the technological developments of the past 20 years, presents a snapshot of the current situation at the beginning of 2019 with many practical considerations, and looks forward to future developments. △ Less

Submitted 25 March, 2020; originally announced March 2020.

Journal ref: Handbook on Big Data and Machine Learning in the Physical Sciences, World Scientific, 2020, 83-120

Rational Strain Engineering in Delafossite Oxides for Highly Efficient Hydrogen Evolution Catalysis in Acidic Media

Authors: Filip Podjaski, Daniel Weber, Siyuan Zhang, Leo Diehl, Roland Eger, Viola Duppel, Esther Alarcon-Llado, Gunther Richter, Frederik Haase, Anna Fontcuberta i Morral, Christina Scheu, Bettina V. Lotsch

Abstract: The rational design of hydrogen evolution reaction (HER) electrocatalysts which are competitive with platinum is an outstanding challenge to make power-to-gas technologies economically viable. Here, we introduce the delafossites PdCrO$_2$, PdCoO$_2$ and PtCoO$_2$ as a new family of electrocatalysts for the HER in acidic media. We show that in PdCoO$_2$ the inherently strained Pd metal sublattice a… ▽ More The rational design of hydrogen evolution reaction (HER) electrocatalysts which are competitive with platinum is an outstanding challenge to make power-to-gas technologies economically viable. Here, we introduce the delafossites PdCrO$_2$, PdCoO$_2$ and PtCoO$_2$ as a new family of electrocatalysts for the HER in acidic media. We show that in PdCoO$_2$ the inherently strained Pd metal sublattice acts as a pseudomorphic template for the growth of a strained (by +2.3%) Pd rich capping layer under reductive conditions. The surface modification continuously improves the electrocatalytic activity by simultaneously increasing the exchange current density j$_0$ from 2 to 5 mA/cm$^2_{geo}$ and by reducing the Tafel slope down to 38 mV/decade, leading to overpotentials $ηいーた_{10}$ < 15 mV for 10 mA/cm$^2_{geo}$, superior to bulk platinum. The greatly improved activity is attributed to the in-situ stabilization of a $βべーた$-palladium hydride phase with drastically enhanced surface catalytic properties with respect to pure or nanostructured palladium. These findings illustrate how operando induced electrodissolution can be used as a top-down design concept for rational surface and property engineering through the strain-stabilized formation of catalytically active phases. △ Less

Submitted 11 March, 2019; originally announced March 2019.

Journal ref: Nat Catal 3, 2020, 55