-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Beam test results of the prototype of the multi wire drift chamber for the CSR external-target experiment
Authors:
Zhi Qin,
Zhoubo He,
Zhe Cao,
Tao Chen,
Zhi Deng,
Limin Duan,
Dong Guo,
Rongjiang Hu,
Jie Kong,
Canwen Liu,
Peng Ma,
Xianglun Wei,
Shihai Wen,
Xiangjie Wen,
Junwei Yan,
Herun Yang,
Zuoqiao Yang,
Yuhong Yu,
Zhigang Xiao
Abstract:
The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with…
▽ More
The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with respect to the vertical axis, respectively. The sensitive area of the prototype is $76 {\rm cm} \times 76 {\rm cm}$. The amplified and shaped signals from the anode wires are digitized in a serial capacity array. Being operated with 1500 V high voltage on the anode wires, the efficiency for each layer is beyond 95\%. The tracking residual is about $301 \pm 2 \rm μm$. The performance meets the requirements of CEE.
△ Less
Submitted 15 May, 2024;
originally announced June 2024.
-
Single-shot deterministic complex amplitude imaging with a single-layer metalens
Authors:
Liu Li,
Shuai Wang,
Feng Zhao,
Yixin Zhang,
Shun Wen,
Huichao Chai,
Yunhui Gao,
Wenhui Wang,
Liangcai Cao,
Yuanmu Yang
Abstract:
Conventional imaging systems can only capture light intensity. Meanwhile, the lost phase information may be critical for a variety of applications such as label-free microscopy and optical metrology. Existing phase retrieval techniques typically require a bulky setup, multi-frame measurements, or prior information of the target scene. Here, we proposed an extremely compact system for complex ampli…
▽ More
Conventional imaging systems can only capture light intensity. Meanwhile, the lost phase information may be critical for a variety of applications such as label-free microscopy and optical metrology. Existing phase retrieval techniques typically require a bulky setup, multi-frame measurements, or prior information of the target scene. Here, we proposed an extremely compact system for complex amplitude imaging, leveraging the extreme versatility of a single-layer metalens to generate spatially-multiplexed and polarization-phase-shifted point spread functions. Combining the metalens with a polarization camera, the system can simultaneously record four polarization shearing interference patterns along both in-plane directions, thus allowing the deterministic reconstruction of the complex amplitude light field in a single shot. Using an incoherent light-emitting diode as the illumination, we experimentally demonstrated speckle-noise-free complex amplitude imaging for both static and moving objects with tailored magnification ratio and field-of-view. The miniaturized and robust system may open the door for complex amplitude imaging in portable devices for point-of-care applications.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Extremely powerful and frequency-tunable terahertz pulses from a table-top laser-plasma wiggler
Authors:
Jie Cai,
Yinren Shou,
Yixing Geng,
Liqi Han,
Xinlu Xu,
Shuangchung Wen,
Baifei Shen,
Jinqing Yu,
Xueqing Yan
Abstract:
The production of broadband, terawatt terahertz (THz) pulses has been demonstrated by irradiating relativistic lasers on solid targets. However, the generation of extremely powerful, narrow-band, and frequency-tunable THz pulses remains a challenge. Here, we present a novel approach for such THz pulses, in which a plasma wiggler is elaborated by a table-top laser and a near-critical density plasma…
▽ More
The production of broadband, terawatt terahertz (THz) pulses has been demonstrated by irradiating relativistic lasers on solid targets. However, the generation of extremely powerful, narrow-band, and frequency-tunable THz pulses remains a challenge. Here, we present a novel approach for such THz pulses, in which a plasma wiggler is elaborated by a table-top laser and a near-critical density plasma. In such a wiggler, the laser-accelerated electrons emit THz radiations with a period closely related to the plasma thickness. Theoretical model and numerical simulations predict a THz pulse with a laser-THz energy conversion over 2.0$\%$, an ultra-strong field exceeding 80 GV/m, a divergence angle approximately 20$^\circ$, and a center-frequency tunable from 4.4 to 1.5 THz, can be generated from a laser of 430 mJ. Furthermore, we demonstrate that this method can work across a wide range of laser and plasma parameters, offering potential for future applications with extremely powerful THz pulse.
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
Metasurface array for single-shot spectroscopic ellipsometry
Authors:
Shun Wen,
Xinyuan Xue,
Liqun Sun,
Yuanmu Yang
Abstract:
Spectroscopic ellipsometry is a potent method that is widely adopted for the measurement of thin film thickness and refractive index. However, a conventional ellipsometer, which utilizes a mechanically rotating polarizer and grating-based spectrometer for spectropolarimetric detection, is bulky, complex, and does not allow real-time measurements. Here, we demonstrated a compact metasurface array-b…
▽ More
Spectroscopic ellipsometry is a potent method that is widely adopted for the measurement of thin film thickness and refractive index. However, a conventional ellipsometer, which utilizes a mechanically rotating polarizer and grating-based spectrometer for spectropolarimetric detection, is bulky, complex, and does not allow real-time measurements. Here, we demonstrated a compact metasurface array-based spectroscopic ellipsometry system that allows single-shot spectropolarimetric detection and accurate determination of thin film properties without any mechanical movement. The silicon-based metasurface array with a highly anisotropic and diverse spectral response is combined with iterative optimization to reconstruct the full Stokes polarization spectrum of the light reflected by the thin film with high fidelity. Subsequently, the film thickness and refractive index can be determined by fitting the measurement results to a proper material model with high accuracy. Our approach opens up a new pathway towards a compact and robust spectroscopic ellipsometry system for the high throughput measurement of thin film properties.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Calibration of a Micromegas-based Gaseous Time Projection Chamber Using Cosmic Ray Muons
Authors:
Wenming Zhang,
Yuanchun Liu,
Haiyan Du,
Ke Han,
Heng Lin,
Tao Li,
Lingyin Luo,
Kaixiang Ni,
Yunzhi Peng,
Shaobo Wang,
Sicheng Wen,
Xiyu Yan,
Zhiyong Zhang,
Wenchang Zhai
Abstract:
We report the calibration of a gaseous Time Projection Chamber based on Micromegas charge readout modules with cosmic ray muons, utilizing their penetrating power and relatively uniform energy deposition per unit length. Muon events were selected through track reconstruction to characterize detector performances, such as the drift velocity, electron lifetime, detector gain, and electric field dist…
▽ More
We report the calibration of a gaseous Time Projection Chamber based on Micromegas charge readout modules with cosmic ray muons, utilizing their penetrating power and relatively uniform energy deposition per unit length. Muon events were selected through track reconstruction to characterize detector performances, such as the drift velocity, electron lifetime, detector gain, and electric field distortion. The evolution of detector performances with gas purities and electric drift fields over a 50-day data-taking cycle was measured by the muon calibration method. For instance, the drift velocity degraded with gas impurities from ${3.40\pm 0.07 ~ cm/μs}$ to ${3.06\pm 0.06 ~ cm/μs}$, and then recovered with gas purification. A ${^{137}Cs}$ calibration source was also placed inside the detector as a reference for muon calibrations.
△ Less
Submitted 27 July, 2023; v1 submitted 16 May, 2023;
originally announced May 2023.
-
On-chip lateral Si:Te PIN photodiodes for room-temperature detection in the telecom optical wavelength bands
Authors:
Mohd Saif Shaikh,
Shuyu Wen,
Mircea-Traian Catuneanu,
Mao Wang,
Artur Erbe,
Slawomir Prucnal,
Lars Rebohle,
Shengqiang Zhou,
Kambiz Jamshidi,
Manfred Helm,
Yonder Berencén
Abstract:
Photonic integrated circuits require photodetectors that operate at room temperature with sensitivity at telecom wavelengths and are suitable for integration with planar complementary-metal-oxide-semiconductor (CMOS) technology. Silicon hyperdoped with deep-level impurities is a promising material for silicon infrared detectors because of its strong room-temperature photoresponse in the short-wave…
▽ More
Photonic integrated circuits require photodetectors that operate at room temperature with sensitivity at telecom wavelengths and are suitable for integration with planar complementary-metal-oxide-semiconductor (CMOS) technology. Silicon hyperdoped with deep-level impurities is a promising material for silicon infrared detectors because of its strong room-temperature photoresponse in the short-wavelength infrared region caused by the creation of an impurity band within the silicon band gap. In this work, we present the first experimental demonstration of lateral Te-hyperdoped Si PIN photodetectors operating at room temperature in the optical telecom bands. We provide a detailed description of the fabrication process, working principle, and performance of the photodiodes, including their key figure of merits. Our results are promising for the integration of active and passive photonic elements on a single Si chip, leveraging the advantages of planar CMOS technology.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Observation of Topological Corner State Arrays in Photonic Quasicrystals
Authors:
Aoqian Shi,
Yiwei Peng,
Jiapei Jiang,
Yuchen Peng,
Peng Peng,
Jianzhi Chen,
Hongsheng Chen,
Shuangchun Wen,
Xiao Lin,
Fei Gao,
Jianjun Liu
Abstract:
Recently, the studies of topological corner states (TCSs) are extended from crystals to quasicrystals, which are referred to as higher-order topological quasicrystalline insulators (HOTQIs). However, the TCSs of complete quasi-periodic structure in photonic systems have yet to be demonstrated. Moreover, there is only one TCS in each corner region in higher-order topological insulators (HOTIs). Inc…
▽ More
Recently, the studies of topological corner states (TCSs) are extended from crystals to quasicrystals, which are referred to as higher-order topological quasicrystalline insulators (HOTQIs). However, the TCSs of complete quasi-periodic structure in photonic systems have yet to be demonstrated. Moreover, there is only one TCS in each corner region in higher-order topological insulators (HOTIs). Increasing the number of TCS is expected to increase application potential of TCSs. In this work, HOTQIs in photonic systems are experimentally observed. It is found that HOTQIs possess TCS arrays, and each TCS array contains several TCSs. Furthermore, the universal theoretical framework of the multimer analysis method is improved, and the difference in the average charge density is proposed as a real-space topological index. These results will open up new ideas for investigating highly integrated, multi-region localized TCSs and are expected to provide new ways to explore topological phenomena and the applications of photonic quasicrystals.
△ Less
Submitted 19 March, 2024; v1 submitted 13 September, 2022;
originally announced September 2022.
-
Feature Identification in Complex Fluid Flows by Convolutional Neural Networks
Authors:
Shizheng Wen,
Michael W. Lee,
Kai M. Kruger Bastos,
Earl H. Dowell
Abstract:
Recent efforts have shown machine learning to be useful for the prediction of nonlinear fluid dynamics. Predictive accuracy is often a central motivation for employing neural networks, but the pattern recognition central to the network function is equally valuable for purposes of enhancing our dynamical insight into confounding dynamics. In this paper, convolutional neural networks (CNNs) were tra…
▽ More
Recent efforts have shown machine learning to be useful for the prediction of nonlinear fluid dynamics. Predictive accuracy is often a central motivation for employing neural networks, but the pattern recognition central to the network function is equally valuable for purposes of enhancing our dynamical insight into confounding dynamics. In this paper, convolutional neural networks (CNNs) were trained to recognize several qualitatively different subsonic buffet flows over a high-incidence airfoil, and a near-perfect accuracy was performed with only a small training dataset. The convolutional kernels and corresponding feature maps, developed by the model with no temporal information provided, identified large-scale coherent structures in agreement with those known to be associated with buffet flows. An approach named Gradient-weighted Class Activation Mapping (Grad-CAM) was then applied to the trained model to indicate the importance of these feature maps in classification. Sensitivity to hyperparameters including network architecture and convolutional kernel size was also explored, and results show that smaller kernels are better at coherent structure identification than are larger kernels. A long-short term memory CNN was subsequently used to demonstrate that with the inclusion of temporal information, the coherent structures remained qualitatively comparable to those of the conventional CNN. The coherent structures identified by these models enhance our dynamical understanding of subsonic buffet over high-incidence airfoils over a wide range of Reynolds numbers.
△ Less
Submitted 20 August, 2022;
originally announced August 2022.
-
Simple theoretical model for parity-time-symmetric metasurfaces
Authors:
Jianlan Xie,
Shaohua Dong,
Bei Yan,
Yuchen Peng,
Jianjun Liu,
Chengwei Qiu,
Shuangchun Wen
Abstract:
Many new possibilities to observe and use novel physical effects are discovered at so called exceptional points (EPs). This is done by using parity-time (PT) -symmetric non-Hermitian systems and balancing gains and losses. When combined with EP-physics, recently, metasurfaces have shown greater abilities for wave manipulation than conventional metasurface systems. However, the solving process for…
▽ More
Many new possibilities to observe and use novel physical effects are discovered at so called exceptional points (EPs). This is done by using parity-time (PT) -symmetric non-Hermitian systems and balancing gains and losses. When combined with EP-physics, recently, metasurfaces have shown greater abilities for wave manipulation than conventional metasurface systems. However, the solving process for EPs usually requires the transfer matrix method (TMM) or a parametric sweep, which are both complex and time-consuming. In this Letter, we develop a simple theoretical model, which is based on acoustic equivalent-circuit theory and can find the analytic solutions for EPs directly. As a proof of concept, PT-symmetric acoustic metasurfaces are studied to test the theoretical model, which enables unidirectional antireflection effects at EPs. In addition, finite element method (FEM) simulations are performed to study these EP solutions using the theoretical model for different mediums, wavelengths, angles of incidence, and gain-loss ratios. Our work offers a simple and powerful theoretical tool for designing PT-symmetric metasurfaces at EPs and may also be used for other classical wave systems.
△ Less
Submitted 22 July, 2021;
originally announced July 2021.
-
Multifrequency and multimode topological waveguides in a Stampfli-triangle photonic crystal with large valley Chern numbers
Authors:
Bei Yan,
Yiwei Peng,
Jianlan Xie,
Yuchen Peng,
Aoqian Shi,
Hang Li,
Feng Gao,
Peng Peng,
Jiapei Jiang,
Fei Gao,
Jianjun Liu,
Shuangchun Wen
Abstract:
The multifrequency quantum valley Hall effect (QVHE) with a large valley Chern number has been realized to significantly improve the transmission capacity of topological waveguides and increase the mode density of topological waveguides. However, multifrequency and multimode QVHEs have not been realized simultaneously. In this work, using tight-binding model calculations and numerical simulations,…
▽ More
The multifrequency quantum valley Hall effect (QVHE) with a large valley Chern number has been realized to significantly improve the transmission capacity of topological waveguides and increase the mode density of topological waveguides. However, multifrequency and multimode QVHEs have not been realized simultaneously. In this work, using tight-binding model calculations and numerical simulations, a valley photonic crystal (VPC) consisting of a Stampfli-triangle photonic crystal is constructed, and its multiple degeneracies in the low-frequency and high-frequency bands split simultaneously to realize the QVHE with multiple topological edge states (TESs). The multifrequency and multimode topological transmission with two low-frequency modes and four high-frequency modes is realized by means of simulations and experiments through a Z-shaped waveguide constructed using two VPCs with opposite valley Chern numbers to prove the realization of a large valley Chern number in the two frequency bands. The two low-frequency modes are successfully distinguished with position-dependent selective excitations, which experimentally demonstrates the occurrence of a large valley Chern number. A frequency-dependent multimode beam splitter is theoretically proposed for high-performance integrated photonic device applications. These results provide new ideas for high-efficiency and high-capacity optical transmission and communication devices and their integration; furthermore, they broaden the application range of TESs.
△ Less
Submitted 19 March, 2024; v1 submitted 29 April, 2021;
originally announced April 2021.
-
High-Order Nonreciprocal Add-Drop Filter
Authors:
Hang Li,
Rui Ge,
Yuchen Peng,
Bei Yan,
Jianlan Xie,
Jianjun Liu,
Shuangchun Wen
Abstract:
Topological photonics have led to the robust optical behavior of the device, which has solved the problem of the influence of manufacturing defects and perturbations on the device performance. Meanwhile, temporal coupled-mode theory (t-CMT) has been developed and applied widely. However, the t-CMT of cascaded coupling cavities (CCC) system and its corresponding high-order filter has yet to be esta…
▽ More
Topological photonics have led to the robust optical behavior of the device, which has solved the problem of the influence of manufacturing defects and perturbations on the device performance. Meanwhile, temporal coupled-mode theory (t-CMT) has been developed and applied widely. However, the t-CMT of cascaded coupling cavities (CCC) system and its corresponding high-order filter has yet to be established. Here the t-CMT of CCC system is established based on the existing t-CMT. By combining the CCC with the topological waveguides, a versatile design scheme of the high-order nonreciprocal add-drop filter (HONAF) is proposed. The relationship between coupling effect of cavities and transmission and filtering performance of HONAF is analyzed quantitatively, then a method to improve the transmission efficiency and quality factor of the filter is given. Based on the combination of gyromagnetic photonic crystals and decagonal Penrose-type photonic quasicrystals, a HONAF is proposed. The transmission and filtering performance of the HONAF are numerically analyzed, which verifies the consistency between the theoretical prediction and the numerical simulation. The t-CMT of CCC system established can be widely used in the coupled resonator optical waveguides and their related systems. The designed HONAF can also be applied and compatible to microwave communication system.
△ Less
Submitted 23 February, 2021; v1 submitted 19 August, 2020;
originally announced August 2020.
-
Energy correction based on fluorescence attenuation of DAMPE
Authors:
Libo Wu,
Yunlong Zhang,
Zhiyong Zhang,
Yifeng Wei,
Sicheng Wen,
Haoting Dai,
Chengming Liu,
Xiaolian Wang,
Zizong Xu,
Guangshun Huang
Abstract:
The major scientific goals of DArk Matter Particle Explorer (DAMPE) are to study cosmic-ray electrons (including positrons) and gamma rays from 5 GeV to 10 TeV and nuclei from Z = 1 to 26 up to 100 TeV. The deposited energy measured by the Bismuth Germanate Oxide (BGO) calorimeter of DAMPE is affected by fluorescence attenuation in BGO crystals that are 600 mm long. In this work, an in-orbit atten…
▽ More
The major scientific goals of DArk Matter Particle Explorer (DAMPE) are to study cosmic-ray electrons (including positrons) and gamma rays from 5 GeV to 10 TeV and nuclei from Z = 1 to 26 up to 100 TeV. The deposited energy measured by the Bismuth Germanate Oxide (BGO) calorimeter of DAMPE is affected by fluorescence attenuation in BGO crystals that are 600 mm long. In this work, an in-orbit attenuation calibration method is reported, and energy correction of the sensitive detector unit of the BGO calorimeter is also presented.
△ Less
Submitted 28 March, 2020;
originally announced March 2020.
-
Upconversion nonlinear structured illumination microscopy
Authors:
Baolei Liu,
Chaohao Chen,
Xiangjun Di,
Jiayan Liao,
Shihui Wen,
Qian Peter Su,
Xuchen Shan,
Zai-Quan Xu,
Lining Arnold Ju,
Fan Wang,
Dayong Jin
Abstract:
Video-rate super-resolution imaging through biological tissue can visualize and track biomolecule interplays and transportations inside cellular organisms. Structured illumination microscopy allows for wide-field super resolution observation of biological samples but is limited by the strong absorption and scattering of light by biological tissues, which degrades its imaging resolution. Here we re…
▽ More
Video-rate super-resolution imaging through biological tissue can visualize and track biomolecule interplays and transportations inside cellular organisms. Structured illumination microscopy allows for wide-field super resolution observation of biological samples but is limited by the strong absorption and scattering of light by biological tissues, which degrades its imaging resolution. Here we report a photon upconversion scheme using lanthanide-doped nanoparticles for wide-field super-resolution imaging through the biological transparent window, featured by near-infrared and low-irradiance nonlinear structured illumination. We demonstrate that the 976 nm excitation and 800 nm up-converted emission can mitigate the aberration. We found that the nonlinear response of upconversion emissions from single nanoparticles can effectively generate the required high spatial frequency components in Fourier domain. These strategies lead to a new modality in microscopy with a resolution of 130 nm, 1/7th of the excitation wavelength, and a frame rate of 1 fps.
△ Less
Submitted 13 February, 2020;
originally announced February 2020.
-
Giant photonic spin Hall effect near the Dirac points
Authors:
Wenhao Xu,
Qiang Yang,
Guangzhou Ye,
Weijie Wu,
Wenshuai Zhang,
Hailu Luo,
Shuangchun Wen
Abstract:
The origin of spin-orbit interaction of light at a conventional optical interface lies in the transverse nature of the photon polarization: The polarizations associated with the plane-wave components experience slightly different rotations in order to satisfy the transversality after reflection or refraction. Recent advances in topological photonic materials provide crucial opportunities to reexam…
▽ More
The origin of spin-orbit interaction of light at a conventional optical interface lies in the transverse nature of the photon polarization: The polarizations associated with the plane-wave components experience slightly different rotations in order to satisfy the transversality after reflection or refraction. Recent advances in topological photonic materials provide crucial opportunities to reexamine the spin-orbit interaction of light at the unique optical interface. Here, we establish a general model to describe the spin-orbit interaction of light in the photonic Dirac metacrystal. We find a giant photonic spin Hall effect near the Dirac points when a Gaussian beam impinges at the interface of the photonic Dirac metacrystal. The giant photonic spin Hall effect is attribute to the strong spin-orbit interaction of light, which manifests itself as the large polarization rotations of different plane-wave components. We believe that these results may provide insight into the fundamental properties of the spin-orbit interaction of light in the topological photonic systems.
△ Less
Submitted 18 January, 2020;
originally announced January 2020.
-
Near-zero-sidelobe optical subwavelength asymmetric focusing lens with dual-layer metasurfaces
Authors:
Jianlan Xie,
Shengnan Liang,
Jianjun Liu,
Pinghua Tang,
Shuangchun Wen
Abstract:
The existing metasurfaces with ultrathin volume for asymmetric transmission were often constructed by metal with low efficiency in optical frequency, and could not realize the optical asymmetric transmission and focusing simultaneously. Although the acoustic asymmetric focusing in asymmetric focusing lens (AFL) was realized, the obtained focal point was accompanied by large sidelobe. To solve thos…
▽ More
The existing metasurfaces with ultrathin volume for asymmetric transmission were often constructed by metal with low efficiency in optical frequency, and could not realize the optical asymmetric transmission and focusing simultaneously. Although the acoustic asymmetric focusing in asymmetric focusing lens (AFL) was realized, the obtained focal point was accompanied by large sidelobe. To solve those problems, an AFL with dual-layer metasurfaces designed by using dielectric materials can realize optical asymmetric transmission and focusing simultaneously in this paper. Furtherly, through optimizing the design theory of AFL, the near-zero-sidelobe (NZS) focusing can be realized on the subwavelength scale. The NZS asymmetric focusing of the optimized AFL is effective in broadband, which is expected to possess tremendous potential in the optical micro-nano processing, quantum communication, optical micromanipulation, etc.
△ Less
Submitted 4 January, 2020; v1 submitted 20 December, 2019;
originally announced December 2019.
-
Broadband Optical Fully Differential Operation Based on the Spin-orbit Interaction of Light
Authors:
Shanshan He,
Junxiao Zhou,
Shizhen Chen,
Weixing Shu,
Hailu Luo,
Shuangchun Wen
Abstract:
Optical technology may provide important architectures for future computing, such as analog optical computing and image processing. Compared with traditional electric operation, optical operation has shown some unique advantages including faster operating speeds and lower power consumption. Here, we propose an optical full differentiator based on the spin-orbit interaction of light at a simple opt…
▽ More
Optical technology may provide important architectures for future computing, such as analog optical computing and image processing. Compared with traditional electric operation, optical operation has shown some unique advantages including faster operating speeds and lower power consumption. Here, we propose an optical full differentiator based on the spin-orbit interaction of light at a simple optical interface. The broadband optical operation is independent on the wavelength due to the nature of purely geometric. As an important application of the fully differential operation, the broadband image processing of edge detection is demonstrated. By adjusting the polarization of the incident beam, the one-dimension edge imaging at any desirable direction can be obtained. The broadband image processing of edge detection provides possible applications in autonomous driving, target recognition, microscopic imaging, and augmented reality.
△ Less
Submitted 22 October, 2019;
originally announced October 2019.
-
Precision Measurement of the Optical Conductivity of Atomically Thin Crystals via Photonic Spin Hall Effect
Authors:
Shizhen Chen,
Xiaohui Ling,
Weixing Shu,
Hailu Luo,
Shuangchun Wen
Abstract:
How to measure the optical conductivity of atomically thin crystals is an important but challenging issue due to the weak light-matter interaction at the atomic scale. Photonic spin Hall effect, as a fundamental physical effect in light-matter interaction, is extremely sensitive to the optical conductivity of atomically thin crystals. Here, we report a precision measurement of the optical conducti…
▽ More
How to measure the optical conductivity of atomically thin crystals is an important but challenging issue due to the weak light-matter interaction at the atomic scale. Photonic spin Hall effect, as a fundamental physical effect in light-matter interaction, is extremely sensitive to the optical conductivity of atomically thin crystals. Here, we report a precision measurement of the optical conductivity of graphene, where the photonic spin Hall effect acts as a measurement pointer. By incorporating with the weak-value amplification technique, the optical conductivity of monolayer graphene taken as a universal constant of $(0.993\pm0.005)σ_0$ is detected, and a high measuring resolution with $1.5\times10^{-8}Ω^{-1}$ is obtained. For few-layer graphene without twist, we find that the conductivities increase linearly with layer number. Our idea could provide an important measurement technique for probing other parameters of atomically thin crystals, such as magneto-optical constant, circular dichroism, and optical nonlinear coefficient.
△ Less
Submitted 6 August, 2019;
originally announced August 2019.
-
First test of a $\mathrm{CdMoO_4}$ scintillating bolometer for neutrinoless double beta decay experiments with $\mathrm{{}^{116}Cd}$ and $\mathrm{{}^{100}Mo}$ nuclides
Authors:
M. Xue,
D. V. Poda,
Y. Zhang,
H. Khalife,
A. Giuliani,
H. Peng,
P. de Marcillac,
E. Olivier,
S. Wen,
K. Zhao,
Y. Wei,
V. Novati,
A. S. Zolotarova,
S. Marnieros,
C. Nones,
T. Redon,
Z. Xu,
X. Wang,
P. Chen,
H. Chen,
L. Dumoulin
Abstract:
A large cylindrical cadmium molybdate crystal with natural isotopic abundance has been used to fabricate a scintillating bolometer. The measurement was performed above ground at milli-Kelvin temperature, with simultaneous readout of the heat and the scintillation light. The energy resolution as FWHM has achieved from 5 keV (at 238 keV) to 13 keV (at 2615 keV). We present the results of the $α$ ver…
▽ More
A large cylindrical cadmium molybdate crystal with natural isotopic abundance has been used to fabricate a scintillating bolometer. The measurement was performed above ground at milli-Kelvin temperature, with simultaneous readout of the heat and the scintillation light. The energy resolution as FWHM has achieved from 5 keV (at 238 keV) to 13 keV (at 2615 keV). We present the results of the $α$ versus $β$/$γ$ events discrimination. The low internal trace contamination of the $\mathrm{CdMoO_4}$ crystal was evaluated as well. The detector performance with preliminary positive indications proves that cadmium molybdate crystal is a promising absorber for neutrinoless double beta decay scintillating bolometric experiments with $\mathrm{{}^{116}Cd}$ and $\mathrm{{}^{100}Mo}$ nuclides in the next-generation technique.
△ Less
Submitted 18 July, 2019;
originally announced July 2019.
-
Finite element method for obtaining the regularized photon Green function in lossy material
Authors:
Meng Tian,
Yong-Gang Huang,
Sha-Sha Wen,
Hong Yang,
Xiao-Yun Wang,
Jin-Zhang Peng,
He-Ping Zhao
Abstract:
Photon Green function (GF) is the vital and most decisive factor in the field of quantum light-matter interaction. It is divergent with two equal space arguments in arbitrary-shaped lossy structure and should be regularized. We introduce a finite element method for calculating the regularized GF. It is expressed by the averaged radiation electric field over the finite-size of the photon emitter. F…
▽ More
Photon Green function (GF) is the vital and most decisive factor in the field of quantum light-matter interaction. It is divergent with two equal space arguments in arbitrary-shaped lossy structure and should be regularized. We introduce a finite element method for calculating the regularized GF. It is expressed by the averaged radiation electric field over the finite-size of the photon emitter. For emitter located in homogeneous lossy material, excellent agreement with the analytical results is found for both real cavity model and virtual cavity model. For emitter located in a metal nano-sphere, the regularized scattered GF, which is the difference between the regularized GF and the analytical regularized one in homogeneous space, agrees well with the analytical scattered GF.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.
-
Calibration and Status of the 3D Imaging Calorimeter of DAMPE for Cosmic Ray Physics on Orbit
Authors:
Libo Wu,
Sicheng Wen,
Chengming Liu,
Haoting Dai,
Yifeng Wei,
Zhiyong Zhang,
Xiaolian Wang,
Zizong Xu,
Changqing Feng,
Shubin Liu,
Qi An,
Yunlong Zhang,
Guangshun Huang,
Yuanpeng Wang,
Chuan Yue,
JingJing Zang,
Jianhua Guo,
Jian Wu,
Jin Chang
Abstract:
The DArk Matter Particle Explorer (DAMPE) developed in China was designed to search for evidence of dark matter particles by observing primary cosmic rays and gamma rays in the energy range from 5 GeV to 10 TeV. Since its launch in December 2015, a large quantity of data has been recorded. With the data set acquired during more than a year of operation in space, a precise time-dependent calibratio…
▽ More
The DArk Matter Particle Explorer (DAMPE) developed in China was designed to search for evidence of dark matter particles by observing primary cosmic rays and gamma rays in the energy range from 5 GeV to 10 TeV. Since its launch in December 2015, a large quantity of data has been recorded. With the data set acquired during more than a year of operation in space, a precise time-dependent calibration for the energy measured by the BGO ECAL has been developed. In this report, the instrumentation and development of the BGO Electromagnetic Calorimeter (BGO ECAL) are briefly described. The calibration on orbit, including that of the pedestal, attenuation length, minimum ionizing particle peak, and dynode ratio, is discussed, and additional details about the calibration methods and performance in space are presented.
△ Less
Submitted 3 January, 2019;
originally announced January 2019.
-
Generalized spatial differentiation from spin Hall effect of light
Authors:
Tengfeng Zhu,
Yijie Lou,
Yihan Zhou,
Jiahao Zhang,
Junyi Huang,
Yan Li,
Hailu Luo,
Shuangchun Wen,
Shiyao Zhu,
Qihuang Gong,
Min Qiu,
Zhichao Ruan
Abstract:
Optics naturally provides us with some powerful mathematical operations. Here we experimentally demonstrate that during reflection or refraction at a single optical planar interface, the optical computing of spatial differentiation can be realized by analyzing specific orthogonal polarization states of light. We show that the spatial differentiation is intrinsically due to the spin Hall effect of…
▽ More
Optics naturally provides us with some powerful mathematical operations. Here we experimentally demonstrate that during reflection or refraction at a single optical planar interface, the optical computing of spatial differentiation can be realized by analyzing specific orthogonal polarization states of light. We show that the spatial differentiation is intrinsically due to the spin Hall effect of light and generally accompanies light reflection and refraction at any planar interface, regardless of material composition or incident angles. The proposed spin-optical method takes advantages of a simple and common structure to enable vectorial-field computation and perform edge detection for ultra-fast and energy-efficient image processing.
△ Less
Submitted 25 July, 2018; v1 submitted 18 April, 2018;
originally announced April 2018.
-
Weak-value amplification forWeyl-point separation in momentum space
Authors:
Shizhen Chen,
Chengquan Mi,
Weijie Wu,
Wenshuai Zhang,
Hailu Luo,
Shuangchun Wen
Abstract:
The existence of Weyl nodes in the momentum space is a hallmark of a Weyl semimetal (WSM). A WSM can be confirmed by observing its Fermi arcs with separated Weyl nodes. In this paper, we study the spin- orbit interaction of light on the surface of WSM in the limit that the thickness is ultra-thin and the incident surface does not support Fermi arc. Our results show that the spin-dependent splittin…
▽ More
The existence of Weyl nodes in the momentum space is a hallmark of a Weyl semimetal (WSM). A WSM can be confirmed by observing its Fermi arcs with separated Weyl nodes. In this paper, we study the spin- orbit interaction of light on the surface of WSM in the limit that the thickness is ultra-thin and the incident surface does not support Fermi arc. Our results show that the spin-dependent splitting induced by the spin-orbit interaction is related to the separation of Weyl nodes. By proposing an amplification technique called weak measurements, the distance of the nodes can be precisely determined. This system may have application in characterizing other parameters of WSM.
△ Less
Submitted 9 February, 2018;
originally announced February 2018.
-
Can the quantum spin Hall state of silicene be preserved on substrate
Authors:
Ke Yang,
Wei-Qing Huang,
Wangyu Hu,
Gui-Fang Huang,
Shuangchun Wen
Abstract:
The substrate-induced topological phase transition of silience is a formidable obstacle for developing silicene-based materials and devices for compatibility with current electronics by using its topologically protected dissipationless edge states. First-principles calculations indicate that the substrate will result in a phase transition from topological nontrivial phase to trivial phase of silic…
▽ More
The substrate-induced topological phase transition of silience is a formidable obstacle for developing silicene-based materials and devices for compatibility with current electronics by using its topologically protected dissipationless edge states. First-principles calculations indicate that the substrate will result in a phase transition from topological nontrivial phase to trivial phase of silicene, although its Dirac cone is still obvious. The substrate effect (equivalent to an electric field) annihilates its spin-orbit coupling effect, the reason why its quantum spin Hall effect (QSHE) of silicene has not been experimentally observed. Unfortunately, external electric field seems impossible to recover the QSHE due to the screen effect of substrate. We here first propose a viable strategy (constructing inverse symmetrical sandwich structure (protective layer/silicene/substrate)) to preserve quantum spin Hall (QSH) state of silicene, which is demonstrated by using two representatives (CeO2(111)/silicene/CeO2(111) and CaF2(111)/silicene/CaF2(111)) through the calculated edge states and Z2 invariant. This work takes a critical step towards fundamental physics and realistic applications of silicene-based nanoelectronic devices.
△ Less
Submitted 2 February, 2018;
originally announced February 2018.
-
280 GHz Focal Plane Unit Design and Characterization for the SPIDER-2 Suborbital Polarimeter
Authors:
A. S. Bergman,
P. A. R. Ade,
S. Akers,
M. Amiri,
J. A. Austermann,
J. A. Beall,
D. T. Becker,
S. J. Benton,
J. J. Bock,
J. R. Bond,
S. A. Bryan,
H. C. Chiang,
C. R. Contaldi,
R. S Domagalski,
O. Doré,
S. M. Duff,
A. J. Duivenvoorden,
H. K. Eriksen,
M. Farhang,
J. P. Filippini,
L. M. Fissel,
A. A. Fraisse,
K. Freese,
M. Galloway,
A. E. Gambrel
, et al. (54 additional authors not shown)
Abstract:
We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mod…
▽ More
We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mode contamination in the CMB from Galactic dust emission. Each 280 GHz focal plane contains a 16 x 16 grid of corrugated silicon feedhorns coupled to an array of aluminum-manganese transition-edge sensor (TES) bolometers fabricated on 150 mm diameter substrates. In total, the three 280 GHz FPUs contain 1,530 polarization sensitive bolometers (765 spatial pixels) optimized for the low loading environment in flight and read out by time-division SQUID multiplexing. In this paper we describe the mechanical, thermal, and magnetic shielding architecture of the focal planes and present cryogenic measurements which characterize yield and the uniformity of several bolometer parameters. The assembled FPUs have high yields, with one array as high as 95% including defects from wiring and readout. We demonstrate high uniformity in device parameters, finding the median saturation power for each TES array to be ~3 pW at 300 mK with a less than 6% variation across each array at one standard deviation. These focal planes will be deployed alongside the 95 and 150 GHz telescopes in the SPIDER-2 instrument, slated to fly from McMurdo Station in Antarctica in December 2018.
△ Less
Submitted 22 November, 2017; v1 submitted 11 November, 2017;
originally announced November 2017.
-
Temperature effects on MIPs in the BGO calorimeters of DAMPE
Authors:
Yuan-Peng Wang,
Si-Cheng Wen,
Wei Jiang,
Chuan Yue,
Zhi-Yong Zhang,
Yi-Feng Wei,
Yun-LongZhang,
Jing-Jing Zang,
Jian Wu
Abstract:
In this paper, we presented a study of temperature effects on BGO calorimeters using proton MIP's collected in the first year operation of DAMPE. By directly comparing MIP calibration constants used by DAMPE data production pipe line, we found an experimental relation between temperature and signal amplitudes of each BGO bar: a general deviation of -1.162%/$^{\circ}$C,and -0.47%/$^{\circ}$C to -1.…
▽ More
In this paper, we presented a study of temperature effects on BGO calorimeters using proton MIP's collected in the first year operation of DAMPE. By directly comparing MIP calibration constants used by DAMPE data production pipe line, we found an experimental relation between temperature and signal amplitudes of each BGO bar: a general deviation of -1.162%/$^{\circ}$C,and -0.47%/$^{\circ}$C to -1.60%/$^{\circ}$C statistically for each detector element. During 2016, DAMPE's temperature changed by about 7 degrees due to solar elevation angle and the corresponding energy scale bias is about 8%. By frequent MIP calibration operation, this kind of bias is eliminated to an acceptable value.
△ Less
Submitted 12 September, 2017; v1 submitted 12 September, 2017;
originally announced September 2017.
-
Giant quantized Goos-Hänchen effect on the surface of graphene in quantum Hall regime
Authors:
Weijie Wu,
Shizhen Chen,
Chengquan Mi,
Wenshuai Zhang,
Hailu Luo,
Shuangchun Wen
Abstract:
We theoretically predict a giant quantized Goos-Hänchen (GH) effect on the surface of graphene in quantum Hall regime. The giant quantized GH effect manifests itself as an angular shift whose quantized step reaches the order of mrad for light beams impinging on a graphene-on-substrate system. The quantized GH effect can be attributed to quantized Hall conductivity, which corresponds to the discret…
▽ More
We theoretically predict a giant quantized Goos-Hänchen (GH) effect on the surface of graphene in quantum Hall regime. The giant quantized GH effect manifests itself as an angular shift whose quantized step reaches the order of mrad for light beams impinging on a graphene-on-substrate system. The quantized GH effect can be attributed to quantized Hall conductivity, which corresponds to the discrete Landau levels in quantum Hall regime. We find that the quantized step can be greatly enhanced for incident angles near the Brewster angle. Moreover, the Brewster angle is sensitive to the Hall conductivity, and therefore the quantized GH effect can be modulated by the Fermi energy and the external magnetic field. The giant quantized GH effect offers a convenient way to determine the quantized Hall conductivity and the discrete Landau levels by a direct optical measurement.
△ Less
Submitted 1 August, 2017;
originally announced August 2017.
-
The DArk Matter Particle Explorer mission
Authors:
J. Chang,
G. Ambrosi,
Q. An,
R. Asfandiyarov,
P. Azzarello,
P. Bernardini,
B. Bertucci,
M. S. Cai,
M. Caragiulo,
D. Y. Chen,
H. F. Chen,
J. L. Chen,
W. Chen,
M. Y. Cui,
T. S. Cui,
A. D'Amone,
A. De Benedittis,
I. De Mitri,
M. Di Santo,
J. N. Dong,
T. K. Dong,
Y. F. Dong,
Z. X. Dong,
G. Donvito,
D. Droz
, et al. (139 additional authors not shown)
Abstract:
The DArk Matter Particle Explorer (DAMPE), one of the four scientific space science missions within the framework of the Strategic Pioneer Program on Space Science of the Chinese Academy of Sciences, is a general purpose high energy cosmic-ray and gamma-ray observatory, which was successfully launched on December 17th, 2015 from the Jiuquan Satellite Launch Center. The DAMPE scientific objectives…
▽ More
The DArk Matter Particle Explorer (DAMPE), one of the four scientific space science missions within the framework of the Strategic Pioneer Program on Space Science of the Chinese Academy of Sciences, is a general purpose high energy cosmic-ray and gamma-ray observatory, which was successfully launched on December 17th, 2015 from the Jiuquan Satellite Launch Center. The DAMPE scientific objectives include the study of galactic cosmic rays up to $\sim 10$ TeV and hundreds of TeV for electrons/gammas and nuclei respectively, and the search for dark matter signatures in their spectra. In this paper we illustrate the layout of the DAMPE instrument, and discuss the results of beam tests and calibrations performed on ground. Finally we present the expected performance in space and give an overview of the mission key scientific goals.
△ Less
Submitted 14 September, 2017; v1 submitted 26 June, 2017;
originally announced June 2017.
-
Quantized photonic spin Hall effect in graphene
Authors:
Liang Cai,
Mengxia Liu,
Shizhen Chen,
Yachao Liu,
Weixing Shu,
Hailu Luo,
Shuangchun Wen
Abstract:
We examine the photonic spin Hall effect (SHE) in a graphene-substrate system with the presence of external magnetic field. In the quantum Hall regime, we demonstrate that the in-plane and transverse spin-dependent splittings in photonic SHE exhibit different quantized behaviors. The quantized SHE can be described as a consequence of a quantized geometric phase (Berry phase), which corresponds to…
▽ More
We examine the photonic spin Hall effect (SHE) in a graphene-substrate system with the presence of external magnetic field. In the quantum Hall regime, we demonstrate that the in-plane and transverse spin-dependent splittings in photonic SHE exhibit different quantized behaviors. The quantized SHE can be described as a consequence of a quantized geometric phase (Berry phase), which corresponds to the quantized spin-orbit interaction. Furthermore, an experimental scheme based on quantum weak value amplification is proposed to detect the quantized SHE in terahertz frequency regime. By incorporating the quantum weak measurement techniques, the quantized photonic SHE holds great promise for detecting quantized Hall conductivity and Berry phase. These results may bridge the gap between the electronic SHE and photonic SHE in graphene.
△ Less
Submitted 20 April, 2017;
originally announced April 2017.
-
Luminosity measurements for the R scan experiment at BESIII
Authors:
M. Ablikim,
M. N. Achasov,
S. Ahmed,
X. C. Ai,
O. Albayrak,
M. Albrecht,
D. J. Ambrose,
A. Amoroso,
F. F. An,
Q. An,
J. Z. Bai,
O. Bakina,
R. Baldini Ferroli,
Y. Ban,
D. W. Bennett,
J. V. Bennett,
N. Berger,
M. Bertani,
D. Bettoni,
J. M. Bian,
F. Bianchi,
E. Boger,
I. Boyko,
R. A. Briere,
H. Cai
, et al. (405 additional authors not shown)
Abstract:
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measur…
▽ More
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measured at the different c.m. energies, individually. The results are the important inputs for R value and $J/ψ$ resonance parameter measurements.
△ Less
Submitted 11 February, 2017;
originally announced February 2017.
-
Generation of perfect vortex and vector beams based on Pancharatnam-Berry phase elements
Authors:
Yachao Liu,
Yougang Ke,
Junxiao Zhou,
Yuanyuan Liu,
Hailu Luo,
Shuangchun Wen,
Dianyuan Fan
Abstract:
Perfect vortex beams are the orbital angular momentum (OAM)-carrying beams with fixed annular intensities, which provide a better source of OAM than traditional Laguerre- Gaussian beams. However, ordinary schemes to obtain the perfect vortex beams are usually bulky and unstable. We demonstrate here a novel generation scheme by designing planar Pancharatnam-Berry (PB) phase elements to replace all…
▽ More
Perfect vortex beams are the orbital angular momentum (OAM)-carrying beams with fixed annular intensities, which provide a better source of OAM than traditional Laguerre- Gaussian beams. However, ordinary schemes to obtain the perfect vortex beams are usually bulky and unstable. We demonstrate here a novel generation scheme by designing planar Pancharatnam-Berry (PB) phase elements to replace all the elements required. Different from the conventional approaches based on reflective or refractive elements, PB phase elements can dramatically reduce the occupying volume of system. Moreover, the PB phase element scheme is easily developed to produce the perfect vector beams. Therefore, our scheme may provide prominent vortex and vector sources for integrated optical communication and micromanipulation systems.
△ Less
Submitted 3 February, 2017;
originally announced February 2017.
-
Strong spin-orbit interaction of light on the surface of atomically thin crystals
Authors:
Mengxia Liu,
Liang Cai,
Shizhen Chen,
Yachao Liu,
Hailu Luo,
Shuangchun Wen
Abstract:
The photonic spin Hall effect (SHE) can be regarded as a direct optical analogy of the SHE in electronic systems where a refractive index gradient plays the role of electric potential. However, it has been demonstrated that the effective refractive index fails to adequately explain the lightmatter interaction in atomically thin crystals. In this paper, we examine the spin-orbit interaction on the…
▽ More
The photonic spin Hall effect (SHE) can be regarded as a direct optical analogy of the SHE in electronic systems where a refractive index gradient plays the role of electric potential. However, it has been demonstrated that the effective refractive index fails to adequately explain the lightmatter interaction in atomically thin crystals. In this paper, we examine the spin-orbit interaction on the surface of the freestanding atomically thin crystals. We find that it is not necessary to involve the effective refractive index to describe the spin-orbit interaction and the photonic SHE in the atomically thin crystals. The strong spin-orbit interaction and giant photonic SHE have been predicted, which can be explained as the large polarization rotation of plane-wave components in order to satisfy the transversality of photon.
△ Less
Submitted 1 February, 2017;
originally announced February 2017.
-
Observation of the Goos-Hänchen shift in graphene via weak measurements
Authors:
Shizhen Chen,
Chengquan Mi,
Liang Cai,
Mengxia Liu,
Hailu Luo,
Shuangchun Wen
Abstract:
We report the observation of the Goos-Hänchen effect in graphene via a weak value amplification scheme. We demonstrate that the amplified Goos-Hänchen shift in weak measurements is sensitive to the variation of graphene layers. Combining the Goos-Hänchen effect with weak measurements may provide important applications in characterizing the parameters of graphene.
We report the observation of the Goos-Hänchen effect in graphene via a weak value amplification scheme. We demonstrate that the amplified Goos-Hänchen shift in weak measurements is sensitive to the variation of graphene layers. Combining the Goos-Hänchen effect with weak measurements may provide important applications in characterizing the parameters of graphene.
△ Less
Submitted 1 September, 2016;
originally announced September 2016.
-
Temperature Dependence Calibration and Correction of the DAMPE BGO Electromagnetic Calorimeter
Authors:
Yifeng Wei,
Zhiyong Zhang,
Yunlong Zhang,
Sicheng Wen,
Chi Wang,
Zhiying Li,
Changqing Feng,
Xiaolian Wang,
Zizong Xu,
Guangshun Huang,
Shubin Liu
Abstract:
A BGO electromagnetic calorimeter (ECAL) is built for the DArk Matter Particle Explorer (DAMPE) mission. The effect of temperature on the BGO ECAL was investigated with a thermal vacuum experiment. The light output of a BGO crystal depends on temperature significantly. The temperature coefficient of each BGO crystal bar has been calibrated, and a correction method is also presented in this paper.
A BGO electromagnetic calorimeter (ECAL) is built for the DArk Matter Particle Explorer (DAMPE) mission. The effect of temperature on the BGO ECAL was investigated with a thermal vacuum experiment. The light output of a BGO crystal depends on temperature significantly. The temperature coefficient of each BGO crystal bar has been calibrated, and a correction method is also presented in this paper.
△ Less
Submitted 27 April, 2016;
originally announced April 2016.
-
The calibration and electron energy reconstruction of the BGO ECAL of the DAMPE detector
Authors:
Zhiyong Zhang,
Chi Wang,
Jianing Dong,
Yifeng Wei,
Sicheng Wen,
Yunlong Zhang,
Zhiying Li,
Changqing Feng,
Shanshan Gao,
ZhongTao Shen,
Deliang Zhang,
Junbin Zhang,
Qi Wang,
SiYuan Ma,
Di Yang,
Di Jiang,
Dengyi Chen,
Yiming Hu,
Guangshun Huang,
Xiaolian Wang,
Zizong Xu,
Shubin Liu,
Qi An,
Yizhong Gong
Abstract:
The DArk Matter Particle Explorer (DAMPE) is a space experiment designed to search for dark matter indirectly by measuring the spectra of photons, electrons, and positrons up to 10 TeV. The BGO electromagnetic calorimeter (ECAL) is its main sub-detector for energy measurement. In this paper, the instrumentation and development of the BGO ECAL is briefly described. The calibration on the ground, in…
▽ More
The DArk Matter Particle Explorer (DAMPE) is a space experiment designed to search for dark matter indirectly by measuring the spectra of photons, electrons, and positrons up to 10 TeV. The BGO electromagnetic calorimeter (ECAL) is its main sub-detector for energy measurement. In this paper, the instrumentation and development of the BGO ECAL is briefly described. The calibration on the ground, including the pedestal, minimum ionizing particle (MIP) peak, dynode ratio, and attenuation length with the cosmic rays and beam particles is discussed in detail. Also, the energy reconstruction results of the electrons from the beam test are presented.
△ Less
Submitted 22 February, 2016;
originally announced February 2016.
-
A study of energy correction for the electron beam data in the BGO ECAL of the DAMPE
Authors:
Zhiying Li,
Zhiyong Zhang,
Yifeng Wei,
Chi Wang,
Yunlong Zhang,
Sicheng Wen,
Xiaolian Wang,
Zizong Xu,
Guangshun Huang
Abstract:
The DArk Matter Particle Explorer (DAMPE) is an orbital experiment aiming at searching for dark matter indirectly by measuring the spectra of photons, electrons and positrons originating from deep space. The BGO electromagnetic calorimeter is one of the key sub-detectors of the DAMPE, which is designed for high energy measurement with a large dynamic range from 5 GeV to 10 TeV. In this paper, some…
▽ More
The DArk Matter Particle Explorer (DAMPE) is an orbital experiment aiming at searching for dark matter indirectly by measuring the spectra of photons, electrons and positrons originating from deep space. The BGO electromagnetic calorimeter is one of the key sub-detectors of the DAMPE, which is designed for high energy measurement with a large dynamic range from 5 GeV to 10 TeV. In this paper, some methods for energy correction are discussed and tried, in order to reconstruct the primary energy of the incident electrons. Different methods are chosen for the appropriate energy ranges. The results of Geant4 simulation and beam test data (at CERN) are presented.
△ Less
Submitted 10 November, 2015;
originally announced November 2015.
-
Black phosphorus mode-locked Er-doped ZBLAN fiber laser at 2.8 um wavelength
Authors:
Zhipeng Qin,
Guoqiang Xie,
Chujun Zhao,
Shuangchun Wen,
Peng Yuan,
Liejia Qian
Abstract:
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave passively mode-locked Er:ZBLAN fiber laser is demonstrated at the wavelength of 2.8 um, which delivers a maximum average output power of 613 mW, a repetition rat…
▽ More
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave passively mode-locked Er:ZBLAN fiber laser is demonstrated at the wavelength of 2.8 um, which delivers a maximum average output power of 613 mW, a repetition rate of 24 MHz and a pulse duration of 42 ps. To the best of our knowledge, it is the first time to demonstrate black phosphorus mode-locked laser at 2.8 um wavelength. Our results demonstrate the feasibility of black phosphorus flake as a new two-dimensional material for application in mid-infrared ultrafast photonics.
△ Less
Submitted 22 September, 2015;
originally announced September 2015.
-
Black phosphorus as saturable absorber for the Q-switched Er:ZBLAN fiber laser at 2.8 μm
Authors:
Zhipeng Qin,
Guoqiang Xie,
Han Zhang,
Chujun Zhao,
Peng Yuan,
Shuangchun Wen,
Liejia Qian
Abstract:
Black phosphorus, a newly emerged two-dimensional material, has attracted wide attention as novel photonic material. Here, multi-layer black phosphorus is successfully fabricated by liquid phase exfoliation method. By employing black phosphorus as saturable absorber, we demonstrate a passively Q-switched Er-doped ZBLAN fiber laser at the wavelength of 2.8 μm. The modulation depth and saturation fl…
▽ More
Black phosphorus, a newly emerged two-dimensional material, has attracted wide attention as novel photonic material. Here, multi-layer black phosphorus is successfully fabricated by liquid phase exfoliation method. By employing black phosphorus as saturable absorber, we demonstrate a passively Q-switched Er-doped ZBLAN fiber laser at the wavelength of 2.8 μm. The modulation depth and saturation fluence of the black phosphorus saturable absorber are measured to be 15% and 9 μJ/cm2, respectively. The Q-switched fiber laser delivers a maximum average power of 485 mW with corresponding pulse energy of 7.7 μJ and pulse width of 1.18 μs at repetition rate of 63 kHz. To the best of our knowledge, this is the first time to demonstrate that black phosphorus can realize Q-switching of 2.8-μm fiber laser. Our research results show that black phosphorus is a promising saturable absorber for mid-infrared pulsed lasers.
△ Less
Submitted 12 August, 2015;
originally announced August 2015.
-
Spin photonics and spin-photonic devices with dielectric metasurfaces
Authors:
Yachao Liu,
Shizhen Chen,
Yougang Ke,
Xinxing Zhou,
Hailu Luo,
Shuangchun Wen
Abstract:
Dielectric metasurfaces with spatially varying birefringence and high transmission efficiency can exhibit exceptional abilities for controlling the photonic spin states. We present here some of our works on spin photonics and spin-photonic devices with metasurfaces. We develop a hybrid-order Poincare sphere to describe the evolution of spin states of wave propagation in the metasurface. Both the B…
▽ More
Dielectric metasurfaces with spatially varying birefringence and high transmission efficiency can exhibit exceptional abilities for controlling the photonic spin states. We present here some of our works on spin photonics and spin-photonic devices with metasurfaces. We develop a hybrid-order Poincare sphere to describe the evolution of spin states of wave propagation in the metasurface. Both the Berry curvature and the Pancharatnam-Berry phase on the hybrid-order Poincare sphere are demonstrated to be proportional to the variation of total angular momentum. Based on the spin-dependent property of Pancharatnam-Berry phase, we find that the photonic spin Hall effect can be observed when breaking the rotational symmetry of metasurfaces. Moreover, we show that the dielectric metasurfaces can provide great flexibility in the design of novel spin-photonic devices such as spin filter and spin-dependent beam splitter.
△ Less
Submitted 15 July, 2015; v1 submitted 14 July, 2015;
originally announced July 2015.
-
Modified weak measurements for detecting photonic spin Hall effect
Authors:
Shizhen Chen,
Xinxing Zhou,
Chengquan Mi,
Hailu Luo,
Shuangchun Wen
Abstract:
Weak measurement is an important technique for detecting the tiny spin-dependent splitting in photonic spin Hall effect. The weak measurement is only valid when the probe wavefunction remains almost undisturbed during the procedure of measurements. However, it does not always satisfy such condition in some practical situations, such as in the strong-coupling regime or the preselected and postselec…
▽ More
Weak measurement is an important technique for detecting the tiny spin-dependent splitting in photonic spin Hall effect. The weak measurement is only valid when the probe wavefunction remains almost undisturbed during the procedure of measurements. However, it does not always satisfy such condition in some practical situations, such as in the strong-coupling regime or the preselected and postselected states are nearly orthogonal. In this paper, we develop a modified weak measurement for detecting photonic spin Hall effect when the probe wavefunction is distorted. We find that the measuring procedure with preselected and postselected ensembles is still effective. This scheme is important for us to detect the photonic spin Hall effect in the case where neither weak nor strong measurements can detect the spin-dependent splitting. The modified theory is valid not only in weak-coupling regime but also in the strong-coupling regime, and especially in the intermediate regime. The theoretical models of conventional weak measurements and modified weak measurements are established and compared. We show that the experimental results coincide well with the predictions of the modified theory.
△ Less
Submitted 15 May, 2015;
originally announced May 2015.
-
Realization of spin-dependent splitting with arbitrary intensity patterns based on all-dielectric metasurfaces
Authors:
Yougang Ke,
Yachao Liu,
Yongli He,
Junxiao Zhou,
Hailu Luo,
Shuangchun Wen
Abstract:
We report the realization of spin-dependent splitting with arbitrary intensity patterns based on all-dielectric metasurface. Compared to the plasmonic metasurfaces, the all-dielectric metasurface exhibit more high transmission efficiency and conversion efficiency, which make it is possible to achieve the spin-dependent splitting with arbitrary intensity patterns. Our findings suggest a way for gen…
▽ More
We report the realization of spin-dependent splitting with arbitrary intensity patterns based on all-dielectric metasurface. Compared to the plasmonic metasurfaces, the all-dielectric metasurface exhibit more high transmission efficiency and conversion efficiency, which make it is possible to achieve the spin-dependent splitting with arbitrary intensity patterns. Our findings suggest a way for generation and manipulation of spin photons, and thereby offer the possibility of developing spin-based nanophotonic applications.
△ Less
Submitted 10 May, 2015;
originally announced May 2015.
-
Seismic isolation of Advanced LIGO: Review of strategy, instrumentation and performance
Authors:
F. Matichard,
B. Lantz,
R. Mittleman,
K. Mason,
J. Kissel,
J. McIver,
B. Abbott,
R. Abbott,
S. Abbott,
E. Allwine,
S. Barnum,
J. Birch,
S. Biscans,
C. Celerier,
D. Clark,
D. Coyne,
D. DeBra,
R. DeRosa,
M. Evans,
S. Foley,
P. Fritschel,
J. A. Giaime,
C. Gray,
G. Grabeel,
J. Hanson
, et al. (27 additional authors not shown)
Abstract:
Isolating ground-based interferometric gravitational wave observatories from environmental disturbances is one of the great challenges of the advanced detector era. In order to directly observe gravitational waves, the detector components and test masses must be highly inertially decoupled from the ground motion not only to sense the faint strain of space-time induced by gravitational waves, but a…
▽ More
Isolating ground-based interferometric gravitational wave observatories from environmental disturbances is one of the great challenges of the advanced detector era. In order to directly observe gravitational waves, the detector components and test masses must be highly inertially decoupled from the ground motion not only to sense the faint strain of space-time induced by gravitational waves, but also to maintain the resonance of the very sensitive 4 km interferometers.
This article presents the seismic isolation instrumentation and strategy developed for Advanced LIGO interferometers. It reviews over a decade of research on active isolation in the context of gravitational wave detection, and presents the performance recently achieved with the Advanced LIGO observatory. Lastly, it discusses prospects for future developments in active seismic isolation and the anticipated benefits to astrophysical gravitational wave searches.
Beyond gravitational wave research, the goal of this article is to provide detailed isolation strategy guidelines for sensitive ground-based physics experiments that may benefit from similar levels of inertial isolation.
△ Less
Submitted 19 January, 2016; v1 submitted 22 February, 2015;
originally announced February 2015.
-
Hybrid-order Poincaré sphere
Authors:
Xunong Yi,
Yachao Liu,
Xiaohui Ling,
Xinxing Zhou,
Yougang Ke,
Hailu Luo,
Shuangchun Wen,
Dianyuan Fan
Abstract:
In this work, we develop a hybrid-order Poincaré sphere to describe the evolution of polarization states of wave propagation in inhomogeneous anisotropic media. We extend the orbital Poincaré sphere and high-order Poincaré sphere to a more general form. Polarization evolution in inhomogeneous anisotropic media with special geometry can be conveniently described by state evolution along the longitu…
▽ More
In this work, we develop a hybrid-order Poincaré sphere to describe the evolution of polarization states of wave propagation in inhomogeneous anisotropic media. We extend the orbital Poincaré sphere and high-order Poincaré sphere to a more general form. Polarization evolution in inhomogeneous anisotropic media with special geometry can be conveniently described by state evolution along the longitude line on the hybrid-order Poincaré sphere. Similar to that in previously proposed Poincaré spheres, the Berry curvature can be regarded as an effective magnetic field with monopole centered at the origin of sphere and Berry connection can be interpreted as the vector potential. Both the Berry curvature and the Pancharatnam-Berry phase on the hybrid-order Poincaré sphere are demonstrated to be proportional to the total angular momentum. Our scheme provides a convenient method to describe the spin-orbit interaction in inhomogeneous anisotropic media.
△ Less
Submitted 7 February, 2015; v1 submitted 10 November, 2014;
originally announced November 2014.
-
Realization of tunable spin-dependent splitting in intrinsic photonic spin Hall effect
Authors:
Xiaohui Ling,
Xunong Yi,
Xinxing Zhou,
Yachao Liu,
Weixing Shu,
Hailu Luo,
Shuangchun Wen
Abstract:
We report the realization of tunable spin-dependent splitting in intrinsic photonic spin Hall effect. By breaking the rotational symmetry of a cylindrical vector beam, the intrinsic vortex phases that the two spin components of the vector beam carries, which is similar to the geometric Pancharatnam-Berry phase, is no longer continuous in the azimuthal direction, and leads to observation of spin ac…
▽ More
We report the realization of tunable spin-dependent splitting in intrinsic photonic spin Hall effect. By breaking the rotational symmetry of a cylindrical vector beam, the intrinsic vortex phases that the two spin components of the vector beam carries, which is similar to the geometric Pancharatnam-Berry phase, is no longer continuous in the azimuthal direction, and leads to observation of spin accumulation at the opposite edge of the beam. Due to the inherent nature of the phase and independency of light-matter interaction, the observed photonic spin Hall effect is intrinsic. Modulating the topological charge of the vector beam, the spin-dependent splitting can be enhanced and the direction of spin accumulation is switchable. Our findings may provide a possible route for generation and manipulation of spin-polarized photons, and enables spin-based photonics applications.
△ Less
Submitted 13 October, 2014; v1 submitted 29 July, 2014;
originally announced July 2014.
-
Generation of cylindrical vector vortex beams by two cascaded metasurfaces
Authors:
Xunong Yi,
Xiaohui Ling,
Zhiyou Zhang,
Ying Li,
Xinxing Zhou,
Yachao Liu,
Shizhen Chen,
Hailu Luo,
Shuangchun Wen
Abstract:
We present a simple and efficient method to generate any cylindrical vector vortex (CVV) beams based on two cascaded metasurfaces. The metasurface works as a space-variant Panchratnam-Berry phase element and can produce any desirable vortex phase and vector polarization. The first metasurface is used to switch the sign of topological charges associated with vortex, and the second metasurface is ap…
▽ More
We present a simple and efficient method to generate any cylindrical vector vortex (CVV) beams based on two cascaded metasurfaces. The metasurface works as a space-variant Panchratnam-Berry phase element and can produce any desirable vortex phase and vector polarization. The first metasurface is used to switch the sign of topological charges associated with vortex, and the second metasurface is applied to manipulate the local polarization. This method allows us to simultaneously manipulate polarization and phase of the CVV beams.
△ Less
Submitted 21 July, 2014;
originally announced July 2014.
-
Photonic spin Hall effect in metasurfaces with rotational symmetry-breaking
Authors:
Yachao Liu,
Xiaohui Ling,
Xunong Yi,
Xinxing Zhou,
Shizhen Chen,
Yougang Ke,
Hailu Luo,
Shuangchun Wen
Abstract:
Observation of photonic spin Hall effect (SHE) in dielectric-based metasurfaces with rotational symmetry breaking is presented. We find that the spin-dependent splitting is a unique angular splitting in the real position space, and is attributed to the space-variant Pancharatnam-Berry phase (PB). Breaking the rotational symmetry of the PB phase by misalignment of the central axes of the incident b…
▽ More
Observation of photonic spin Hall effect (SHE) in dielectric-based metasurfaces with rotational symmetry breaking is presented. We find that the spin-dependent splitting is a unique angular splitting in the real position space, and is attributed to the space-variant Pancharatnam-Berry phase (PB). Breaking the rotational symmetry of the PB phase by misalignment of the central axes of the incident beam and the metasurface, the spin-dependent shift is observable. We show that the spin-dependent shift can be enhanced by increasing the rotation rate of the metasurface, so the metasurface provides a great flexibility in the manipulation of photonic SHE.
△ Less
Submitted 3 August, 2014; v1 submitted 22 July, 2014;
originally announced July 2014.
-
Photonic spin Hall effect for precision metrology
Authors:
Xinxing Zhou,
Shizhen Chen,
Yachao Liu,
Hailu Luo,
Shuangchun Wen
Abstract:
The photonic spin Hall effect (SHE) is generally believed to be a result of an effective spin-orbit coupling, which describes the mutual influence of the spin (polarization) and the trajectory of the light beam. The photonic SHE holds great potential for precision metrology owing to the fact that the spin-dependent splitting in photonic SHE are sensitive to the physical parameter variations of dif…
▽ More
The photonic spin Hall effect (SHE) is generally believed to be a result of an effective spin-orbit coupling, which describes the mutual influence of the spin (polarization) and the trajectory of the light beam. The photonic SHE holds great potential for precision metrology owing to the fact that the spin-dependent splitting in photonic SHE are sensitive to the physical parameter variations of different systems. Remarkably, using the weak measurements, this tiny spin-dependent shifts can be detected with the desirable accuracy so that the corresponding physical parameters can be determined. Here, we will review some of our works on using photonic SHE for precision metrology, such as measuring the thickness of nanometal film, identifying the graphene layers, detecting the strength of axion coupling in topological insulators, and determining the magneto-optical constant of magnetic film.
△ Less
Submitted 4 September, 2014; v1 submitted 21 July, 2014;
originally announced July 2014.
-
Generation of arbitrary cylindrical vector beams on the higher order Poincare sphere
Authors:
Shizhen Chen,
Xinxing Zhou,
Yachao Liu,
Xiaohui Ling,
Hailu Luo,
Shuangchun Wen
Abstract:
We propose and experimentally demonstrate a novel interferometric approach to generate arbitrary cylindrical vector beams on the higher order Poincare sphere. Our scheme is implemented by collinear superposition of two orthogonal circular polarizations with opposite topological charges. By modifying the amplitude and phase factors of the two beams, respectively, any desired vector beams on the hig…
▽ More
We propose and experimentally demonstrate a novel interferometric approach to generate arbitrary cylindrical vector beams on the higher order Poincare sphere. Our scheme is implemented by collinear superposition of two orthogonal circular polarizations with opposite topological charges. By modifying the amplitude and phase factors of the two beams, respectively, any desired vector beams on the higher order Poincare sphere with high tunability can be acquired. Our research provides a convenient way to evolve the polarization states in any path on the high order Poincare sphere.
△ Less
Submitted 21 July, 2014;
originally announced July 2014.
-
Realization of polarization evolution on higher-order Poincare sphere with metasurface
Authors:
Yachao Liu,
Xiaohui Ling,
Xunong Yi,
Xinxing Zhou,
Hailu Luo,
Shuangchun Wen
Abstract:
We present a simple and convenient method to yield cylindrical vector (CV) beams and realize its polarization evolution on higher-order Poincare sphere based on inhomogeneous birefringent metasurface. By means of local polarization transformation of the metasurface, it is possible to convert a light beam with homogeneous elliptical polarization into a vector beam with any desired polarization dist…
▽ More
We present a simple and convenient method to yield cylindrical vector (CV) beams and realize its polarization evolution on higher-order Poincare sphere based on inhomogeneous birefringent metasurface. By means of local polarization transformation of the metasurface, it is possible to convert a light beam with homogeneous elliptical polarization into a vector beam with any desired polarization distribution. The Stokes parameters of the output light are measured to verify our scheme, which show well agreement with the theoretical prediction. Our method may provide a convenient way to generate CV beams, which is expected to have potential applications in encoding information and quantum computation.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
Geometric Photonic Spin Hall Effect with Metapolarization
Authors:
Xiaohui Ling,
Xinxing Zhou,
Xunong Yi,
Hailu Luo,
Shuangchun Wen
Abstract:
We develop a geometric photonic spin Hall effect (PSHE) which manifests as spin-dependent shift in momentum space. It originates from an effective space-variant Pancharatnam-Berry (PB) phase created by artificially engineering the polarization distribution of the incident light. Unlikely the previously reported PSHE involving the light-matter interaction, the resulting spin-dependent splitting in…
▽ More
We develop a geometric photonic spin Hall effect (PSHE) which manifests as spin-dependent shift in momentum space. It originates from an effective space-variant Pancharatnam-Berry (PB) phase created by artificially engineering the polarization distribution of the incident light. Unlikely the previously reported PSHE involving the light-matter interaction, the resulting spin-dependent splitting in the geometric PSHE is purely geometrically depend upon the polarization distribution of light which can be tailored by assembling its circular polarization basis with suitably magnitude and phase. This metapolarization idea enables us to manipulate the geometric PSHE by suitably tailoring the polarization geometry of light. Our scheme provides great flexibility in the design of various polarization geometry and polarization-dependent application, and can be extrapolated to other physical system, such as electron beam or atom beam, with the similar spin-orbit coupling underlying.
△ Less
Submitted 3 July, 2014;
originally announced July 2014.