Showing 1–50 of 316 results for author: Wu, W

Disorder enhanced exciton transport and quantum information spreading with the assistance of cavity QED

Authors: Weijun Wu, Ava N. Hejazi, Gregory D. Scholes

Abstract: Molecular materials have been studied as a potential platform for highly efficient transport such as exciton transport and quantum information spreading. However, one detrimental factor to transport efficiency is the inherent disorder of the molecular system, where site-to-site hopping is suppressed by Anderson localization. Here we theoretically report a novel approach to eliminate the negative i… ▽ More Molecular materials have been studied as a potential platform for highly efficient transport such as exciton transport and quantum information spreading. However, one detrimental factor to transport efficiency is the inherent disorder of the molecular system, where site-to-site hopping is suppressed by Anderson localization. Here we theoretically report a novel approach to eliminate the negative impact of disorder by strongly coupling the system to a cavity, where the cavity photon bridges spatially separated sites and builds an additional transport channel, cavity-mediated jumping. Our analysis of the open quantum system dynamics shows in terms of long-range transport, the two channels hold a competitive relation. When disorder suppresses site-to-site hopping, transport occurs mainly through cavity-mediated jumping in disguise. Therefore, with the assistance of the cavity, disorder in certain ranges can enhance transport and certain disordered systems can even be more efficient for transport than the homogeneous system. These results provide insight into the design of next-generation materials for exciton transport and quantum information spreading by leveraging hybrid light-matter states. △ Less

Submitted 10 September, 2024; originally announced September 2024.

Comments: 8 pages, 5 figures (main); 8 pages, 7 figures (Supplementary Material)

Design of a large-scale superconducting dipole magnet for the CEE spectrometer

Authors: Yuquan Chen, Wei You, Jiaqi Lu, Yujin Tong, Luncai Zhou, Beimin Wu, Enming Mei, Wentian Feng, Xianjin Ou, Wei Wu, Qinggao Yao, Peng Yang, Yuhong Yu, Zhiyu Sun

Abstract: The CSR External-target Experiment (CEE) is a large-scale spectrometer under construction at the Heavy Ion Research Facility in Lanzhou (HIRFL) for studying the phase structure of nuclear matter at high baryon density and the equation of states of nuclear matter at supra-saturation densities. One of the key components is a large acceptance dipole magnet with a central field of 0.5 T and the homoge… ▽ More The CSR External-target Experiment (CEE) is a large-scale spectrometer under construction at the Heavy Ion Research Facility in Lanzhou (HIRFL) for studying the phase structure of nuclear matter at high baryon density and the equation of states of nuclear matter at supra-saturation densities. One of the key components is a large acceptance dipole magnet with a central field of 0.5 T and the homogeneity of 5% within a 1 m long, 1.2 m wide, and 0.9 m high aperture. Detectors will be installed within this aperture. An innovative design for the superconducting detector magnet is proposed that goes beyond the conventional approach. The magnet is designed as a coil-dominant type, with conductors discretized on a racetrack-shaped cross-section to generate the necessary fields. A warm iron yoke is used to enhance the central field and minimize the stray field. The magnet has overall dimensions of 3.4 meters in length, 2.7 meters in height, and 4.3 meters in width. The coils will be wound using a 19-strand rope cable comprised of 12 NbTi superconducting wires and 7 copper wires. The ratio of copper to superconductor of the cable is 6.9. The keel supports serve as the primary structural support for the coils to withstand the electromagnetic force. The coils will be indirectly cooled by liquid helium within three external helium vessels. To ensure reliable protection of the magnet during a quench, an active protection method combined with quench-back effect is employed. In this paper, we mainly present the detailed design of the magnetic field, structure, quench protection and cryostat for the spectrometer magnet. △ Less

Submitted 3 September, 2024; originally announced September 2024.

Broadband light extraction from near-surface NV centers using crystalline-silicon antennas

Authors: Minjeong Kim, Maryam Zahedian, Wenxin Wu, Chengyu Fang, Zhaoning Yu, Raymond A. Wambold, Shenwei Yin, David A. Czaplewski, Jennifer T. Choy, Mikhail A. Kats

Abstract: We use crystalline silicon (Si) antennas to efficiently extract broadband single-photon fluorescence from shallow nitrogen-vacancy (NV) centers in diamond into free space. Our design features relatively easy-to-pattern high-index Si resonators on the diamond surface to boost photon extraction by overcoming total internal reflection and Fresnel reflection at the diamond-air interface, and providing… ▽ More We use crystalline silicon (Si) antennas to efficiently extract broadband single-photon fluorescence from shallow nitrogen-vacancy (NV) centers in diamond into free space. Our design features relatively easy-to-pattern high-index Si resonators on the diamond surface to boost photon extraction by overcoming total internal reflection and Fresnel reflection at the diamond-air interface, and providing modest Purcell enhancement, without etching or otherwise damaging the diamond surface. In simulations, ~20 times more single photons are collected from a single NV center compared to the case without the antenna; in experiments, we observe an enhancement of ~4 times, limited by spatial alignment between the NV and the antenna. Our approach can be readily applied to other color centers in diamond, and more generally to the extraction of light from quantum emitters in wide-bandgap materials. △ Less

Submitted 1 September, 2024; originally announced September 2024.

Comments: Main text + supplementary

Molecular Entanglement Witness by Absorption Spectroscopy in Cavity QED

Authors: Weijun Wu, Francesca Fassioli, David A. Huse, Gregory D. Scholes

Abstract: Producing and maintaining molecular entanglement at room temperature and detecting multipartite entanglement features of macroscopic molecular systems remain key challenges for understanding inter-molecular quantum effects in chemistry. Here, we study the quantum Fisher information, a central concept in quantum metrology, as a multipartite entanglement witness. We generalize the entanglement witne… ▽ More Producing and maintaining molecular entanglement at room temperature and detecting multipartite entanglement features of macroscopic molecular systems remain key challenges for understanding inter-molecular quantum effects in chemistry. Here, we study the quantum Fisher information, a central concept in quantum metrology, as a multipartite entanglement witness. We generalize the entanglement witness functional related to quantum Fisher information regarding non-identical local response operators. We show that it is a good inter-molecular entanglement witness for ultrastrong light-matter coupling in cavity quantum electrodynamics, including near the superradiant phase transition. We further connect quantum Fisher information to the dipole correlator, which suggests that this entanglement could be detected by absorption spectroscopy. Our work proposes a general protocol to detect inter-molecular entanglement in chemical systems at room temperature. △ Less

Submitted 27 August, 2024; originally announced August 2024.

Comments: 7 pages, 4 figures (main text); 12 pages, 4 figures (supplementary material)

Thermal Management Design and Key Technology Validation for PandaX Underground Experiment

Authors: Tao Zhan, Jianglai Liu, Yang Liu, Weihao Wu, Binbin Yan, Zhou Wang

Abstract: The scale of liquid xenon experiments for rare events searching is expanding, which is planned even to fifty tons level. The detector and distillation tower require a reliable cooling source with large cooling power at liquid xenon temperature range. Pulse tube refrigerators and GM refrigerators, which were widely used in previous detectors, have the disadvantages of small cooling power, large spa… ▽ More The scale of liquid xenon experiments for rare events searching is expanding, which is planned even to fifty tons level. The detector and distillation tower require a reliable cooling source with large cooling power at liquid xenon temperature range. Pulse tube refrigerators and GM refrigerators, which were widely used in previous detectors, have the disadvantages of small cooling power, large space occupation, and non-standby mutuality, which become bottlenecks of the experiment scale expansion. In this study, an auto-cascade refrigerator with ethanol coolant is developed, and the heat transfer effect is improved by adopting the concentric shaft heat exchanger and after-pumping heat transfer scheme. The 2.5 kW stable cooling power is obtained at 155 K. Further, the feasibility and key technology of the centralized cooling system of 5 kw at 160 K is discussed. The study can simplify liquid xenon experimental auxiliary devices, which will be helpful for the PandaX-xT experiment scheme and its laboratory infrastructure design. △ Less

Submitted 23 August, 2024; originally announced August 2024.

Comments: 25pages, 10 figures

DUNE Phase II: Scientific Opportunities, Detector Concepts, Technological Solutions

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1347 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a "Module of Opportunity", aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos. △ Less

Submitted 22 August, 2024; originally announced August 2024.

Report number: FERMILAB-TM-2833-LBNF

Pressure-Induced Separation of a Laminar Boundary Layer over a Partially-Slip Wall

Authors: Benjamin Kellum Cooper, Benjamin S. Savino, John Marshall Cooper, Taiho Yeom, Wen Wu

Abstract: The characteristics of pressure-induced laminar separation bubbles (LSBs) over a partially-slip wall, compared with that over a canonical no-slip wall, are studied using direct numerical simulation. Three cases, two utilizing linear Robin-type slip boundary conditions of differing slip length ($Λらむだ$), and one non-slip are compared. For the partial-slip cases, a streamwise distribution of slip profil… ▽ More The characteristics of pressure-induced laminar separation bubbles (LSBs) over a partially-slip wall, compared with that over a canonical no-slip wall, are studied using direct numerical simulation. Three cases, two utilizing linear Robin-type slip boundary conditions of differing slip length ($Λらむだ$), and one non-slip are compared. For the partial-slip cases, a streamwise distribution of slip profile is employed ensuring smooth transition between no-slip and partial-slip (transition from no-slip to a constant slip length takes 5$δでるた$, where $δでるた$ is the inflow boundary layer thickness). The constant target slip length is maintained for $20δでるた$ upstream and during the onset of flow separation. The separation is induced by a wall-normal velocity profile applied at the top boundary. All cases are performed at $Re_δでるた= U_{\infty}δでるた/νにゅー= 455$. Initial results indicate that as slip length increases, separation and reattachment are delayed. Most notably, the formation and shedding of roller vortices is mitigated as slip length increases, resulting in a less turbulent wake, despite that self-similarity of the plane shear layer is maintained. △ Less

Submitted 13 August, 2024; originally announced August 2024.

Comments: 7 pages, 9 figures

Separation of a Laminar Boundary Layer Subjected to Pressure Gradients with Spanwise Variations

Authors: John Marshall Cooper, Benjamin S. Savino, Benjamin Kellum Cooper, Wen Wu

Abstract: The characteristics of three-dimensional laminar separation bubbles (LSBs), compared with their quasi-two-dimensional counterparts, are studied using direct numerical simulation. A three-dimensional suction-blowing distribution is applied on the top boundary to induce flow separation. Three levels of suction strength (i.e., adverse pressure gradient (APG) strength) are tested. For each suction lev… ▽ More The characteristics of three-dimensional laminar separation bubbles (LSBs), compared with their quasi-two-dimensional counterparts, are studied using direct numerical simulation. A three-dimensional suction-blowing distribution is applied on the top boundary to induce flow separation. Three levels of suction strength (i.e., adverse pressure gradient (APG) strength) are tested. For each suction level, the spanwise extent of the suction is varied using a Gaussian distribution centered about the domain centerline. Two non-uniform suction distributions are compared with uniformly-applied suction across the full span (implying a two-dimensional LSB), totaling nine cases. All cases are performed at $Re_δでるた= U_{\infty}δでるた/νにゅー= 1000$ based on the inflow boundary layer thickness ($δでるた$) and free-stream velocity ($U_{\infty}$). Initial results indicate stark contrast between three-dimensional and two-dimensional LSBs. Most notably, the role of suction width is determining the topology of the LSB and its reattachment mechanism. Meanwhile, APG is responsible for determining the size of the LSB and level of turbulence at reattachment. Streamwise-oriented vortices are identified along the crest of the three-dimensional LSBs. △ Less

Submitted 12 August, 2024; originally announced August 2024.

Comments: 10 pages, 8 figures

Escape cascades as a behavioral contagion process with adaptive network dynamics

Authors: Wenhan Wu, Xiaoping Zheng, Pawel Romanczuk

Abstract: Complex behavioral contagion in collective evasion of mobile animal groups can be predicted by reconstructing quantitative interaction networks. Based on the assumption of time-scale separation between a fast contagion process and a slower movement response, the underlying interaction networks have been previously assumed to be static, determined by the spatial structure at the onset of the collec… ▽ More Complex behavioral contagion in collective evasion of mobile animal groups can be predicted by reconstructing quantitative interaction networks. Based on the assumption of time-scale separation between a fast contagion process and a slower movement response, the underlying interaction networks have been previously assumed to be static, determined by the spatial structure at the onset of the collective escape response. This idealization does not account for the temporal evolution of the spatial network structure, which may have a major impact on the behavioral contagion dynamics. Here, we propose a spatially-explicit, agent-based model for the coupling between behavioral contagion and the network dynamics originating from the spreading movement response. We explore the impact of movement parameters (startle speed, initial directionality, and directional noise) on average cascade size. By conducting numerical simulations for different density levels, we show that increasing escape speed suppresses the cascade size in most cases, that the cascade size depends strongly on the movement direction of the initially startled individual, and that large variability in the direction of individual escape movements (rotational noise) will typically promote the spread of behavioral contagion through spatial groups. Our work highlights the importance of accounting for movement dynamics in behavioral contagion, and facilitates our understanding of rapid coordinated response and collective information processing in animal groups. △ Less

Submitted 9 August, 2024; originally announced August 2024.

First Measurement of the Total Inelastic Cross-Section of Positively-Charged Kaons on Argon at Energies Between 5.0 and 7.5 GeV

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1341 additional authors not shown)

Abstract: ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each… ▽ More ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting. △ Less

Submitted 1 August, 2024; originally announced August 2024.

Report number: CERN-EP-2024-211, FERMILAB-PUB-24-0216-V

Design of High-speed readout electronics for the DarkSHINE electromagnetic calorimeter

Authors: Yihan Guo, Shu Li, Kun Liu, Yang Liu, Yongqi Tan, Jiannan Tang, Weihao Wu, Haijun Yang, Zhiyu Zhao, Wei Zhi, Zhizhen Zhou

Abstract: The DarkSHINE experiment aims to search for dark photons by measuring the energy loss of the electrons recoiled from fixed-target. Its electromagnetic calorimeter is primarily responsible for accurately reconstructing the energy of the recoil electrons and bremsstrahlung photons. The performance of the electromagnetic calorimeter is crucial, as its energy measurement precision directly determines… ▽ More The DarkSHINE experiment aims to search for dark photons by measuring the energy loss of the electrons recoiled from fixed-target. Its electromagnetic calorimeter is primarily responsible for accurately reconstructing the energy of the recoil electrons and bremsstrahlung photons. The performance of the electromagnetic calorimeter is crucial, as its energy measurement precision directly determines the sensitivity to the search for dark photons. The DarkSHINE electromagnetic calorimeter uses LYSO crystals to form a fully absorptive electromagnetic calorimeter. It utilizes SiPMs to detect scintillation light in the crystals, and its readout electronics system deduces the deposited energy in the crystals by measuring the number of photoelectric signals generated by the SiPMs. The DarkSHINE electromagnetic calorimeter aims to operate at an event rate of 1-10 MHz, detecting energies ranging from 1 MeV to 1 GeV. To meet the requirements of high energy measurement precision, high event rate, and large dynamic range, we have researched and designed a readout electronics system based on dual-channel high-speed ADCs and a customized DAQ. The front-end amplification part of this system uses low-noise trans-impedance amplifiers to achieve high-precision waveform amplification. It successfully achieves a dynamic range up to a thousandfold through a double-gain readout scheme. The digital part uses 1 GSPS high-speed ADCs to achieve non-dead-time, high-precision waveform digitization. The DAQ part uses JESD204B high-speed serial protocol to read out the signal from ADC, and transmit it to PC software for processing and storage. Test results show a signal-to-noise ratio greater than 66 dBFS and an ENOB greater than 10.6 bits. Energy spectra measurements have been conducted using LYSO crystals and SiPMs, and an energy resolution of 5.96% at the 2.6 MeV gamma peak of Th-232 has been achieved. △ Less

Submitted 30 July, 2024; originally announced July 2024.

Unraveling the role of Ta in the phase transition of Pb(Ta1+xSe2)2 using low-temperature Raman spectroscopy

Authors: Yu Ma, Chi Sin Tang, Xiaohui Yang, Yi Wei Ho, Jun Zhou, Wenjun Wu, Shuo Sun, Jin-Ke Bao, Dingguan Wang, Xiao Lin, Magdalena Grzeszczyk, Shijie Wang, Mark B H Breese, Chuanbing Cai, Andrew T. S. Wee, Maciej Koperski, Zhu-An Xu, Xinmao Yin

Abstract: Phase engineering strategies in two-dimensional transition metal dichalcogenides (2D-TMDs) have garnered significant attention due to their potential applications in electronics, optoelectronics, and energy storage. Various methods, including direct synthesis, pressure control, and chemical doping, have been employed to manipulate structural transitions in 2D-TMDs. Metal intercalation emerges as a… ▽ More Phase engineering strategies in two-dimensional transition metal dichalcogenides (2D-TMDs) have garnered significant attention due to their potential applications in electronics, optoelectronics, and energy storage. Various methods, including direct synthesis, pressure control, and chemical doping, have been employed to manipulate structural transitions in 2D-TMDs. Metal intercalation emerges as an effective technique to modulate phase transition dynamics by inserting external atoms or ions between the layers of 2D-TMDs, altering their electronic structure and physical properties. Here, we investigate the significant structural phase transitions in Pb(Ta1+xSe2)2 single crystals induced by Ta intercalation using a combination of Raman spectroscopy and first-principles calculations. The results highlight the pivotal role of Ta atoms in driving these transitions and elucidate the interplay between intercalation, phase transitions, and resulting electronic and vibrational properties in 2D-TMDs. By focusing on Pb(Ta1+xSe2)2 as an ideal case study and investigating like metal intercalation, this study advances understanding in the field and paves the way for the development of novel applications for 2D-TMDs, offering insights into the potential of these materials for future technological advancements. △ Less

Submitted 8 August, 2024; v1 submitted 28 July, 2024; originally announced July 2024.

A Low-Frequency Vibration Experimental Platform for University Physics Experiment Designed by LabVIEW

Authors: Yangjie Dai, Leijian Wang, Wenbin Wu, Aiping Chen, Dawei Gu

Abstract: Virtual instrument technology has been increasingly used in university physics experiment teaching. An experimental platform is specifically constructed for studying low-frequency vibrations in university physics, which is based on a computer and its internal sound card, along with a program developed in LabVIEW programming environment to perform control and measurement on our experimental platfor… ▽ More Virtual instrument technology has been increasingly used in university physics experiment teaching. An experimental platform is specifically constructed for studying low-frequency vibrations in university physics, which is based on a computer and its internal sound card, along with a program developed in LabVIEW programming environment to perform control and measurement on our experimental platform. The proposed platform effectively replaces the conventional signal generator and oscilloscope traditionally used in such experiments by integrating virtual instruments and essential experimental equipment. The platform offers various functionalities, such as synchronous transmission and reception of low-frequency signals, frequency measurement, dynamic frequency sweep measurement, and measurement using the three-point approximation method. The proposed platform has been successfully applied in experiments involving forced vibration, resonance of tuning forks, and dynamic measurement of Young's modulus. Unlike conventional low-frequency vibration experiments, the proposed experimental platform optimizes efficiency, reduces costs, and offers opportunities for enhancing the instructional content of experiments. Furthermore, the incorporation of state-of-the-art computer technology enhances students' engagement and enthusiasm for learning. △ Less

Submitted 27 July, 2024; originally announced July 2024.

Comments: 13 pages, 8 figures, 2 supplementary files

Design of a LYSO Crystal Electromagnetic Calorimeter for DarkSHINE Experiment

Authors: Zhiyu Zhao, Qibin Liu, Jiyuan Chen, Jing Chen, Junfeng Chen, Xiang Chen, Changbo Fu, Jun Guo, Kim Siang Khaw, Liang Li, Shu Li, Danning Liu, Kun Liu, Siyuan Song, Tong Sun, Jiannan Tang, Yufeng Wang, Zhen Wang, Weihao Wu, Haijun Yang, Yuming Lin, Rui Yuan, Yulei Zhang, Yunlong Zhang, Baihong Zhou , et al. (2 additional authors not shown)

Abstract: This paper presents the design and optimization of a LYSO crystal-based electromagnetic calorimeter (ECAL) for the DarkSHINE experiment, which aims to search for dark photon as potential dark force mediator. The ECAL design has been meticulously evaluated through comprehensive simulations, focusing on optimizing dimensions, material choices, and placement within the detector array to enhance sensi… ▽ More This paper presents the design and optimization of a LYSO crystal-based electromagnetic calorimeter (ECAL) for the DarkSHINE experiment, which aims to search for dark photon as potential dark force mediator. The ECAL design has been meticulously evaluated through comprehensive simulations, focusing on optimizing dimensions, material choices, and placement within the detector array to enhance sensitivity in search for dark photon signatures while balancing cost and performance. The concluded ECAL design, comprising 2.5$\times$2.5$\times$4 cm$^3$ LYSO crystals arranged in a 52.5$\times$52.5$\times$44 cm$^3$ structure, ensures high energy resolution and effective energy containment. The study also explored the energy distribution across different ECAL regions and established a dynamic range for energy measurements, with a 4 GeV limit per crystal deemed sufficient. Additionally, the radiation tolerance of ECAL components was assessed, confirming the sustainability of LYSO crystals and radiation-resistant silicon sensors. △ Less

Submitted 25 July, 2024; originally announced July 2024.

Ultra-compact beam steering nanolasers

Authors: Xinghong Chen, Mingxuan Gu, Jiankai Tang, Yungang Sang, Bingrui Xiang, Kong Zhang, Guanjie Zhang, Xingyuan Wang, Xuhan Guo, Linjie Zhou, Wengang Wu, Yifei Mao

Abstract: The miniaturization and integration of beam steering devices have consistently been the focus of the field. Conventional methods alter the eigenmode of the optical cavity by regulating the refractive index. Due to the weak nonlinear effect of the optical system, the device must be sufficiently large to achieve sufficient light modulation. The effective method for miniaturizing beam steering device… ▽ More The miniaturization and integration of beam steering devices have consistently been the focus of the field. Conventional methods alter the eigenmode of the optical cavity by regulating the refractive index. Due to the weak nonlinear effect of the optical system, the device must be sufficiently large to achieve sufficient light modulation. The effective method for miniaturizing beam steering devices currently in use is based on metasurfaces. However, this type of device necessitates the input of a laser source, which precludes the simultaneous generation and control of light in a single device. Here we propose a miniaturized beam steering device that employs mode selection between different bound states in the continuum (BIC) states through phase change material. The device is capable of simultaneously achieving both light generation and beam steering (33°) in a single device with a size of only 25 μみゅーm and with a low threshold of 8.9 kW cm-2. Furthermore,it is possible to achieve a significant degree of dynamic wavelength tunability, with a range extending up to 296 nm. This method achieves high-efficient regulation of light properties by dynamically controlling the system's topological charge, circumventing the problem of weak nonlinearity in traditional methods. Furthermore, the integration of phase change materials with nanolasers enables the direct alteration of lasing properties, which provides a novel idea for dynamic light control. The device process scheme based on phase change materials is straightforward, direct, and highly compatible, which will be advantageous for its intended application. △ Less

Submitted 19 July, 2024; originally announced July 2024.

Bounding elastic photon-photon scattering at $\sqrt s \approx 1\,$MeV using a laser-plasma platform

Authors: R. Watt, B. Kettle, E. Gerstmayr, B. King, A. Alejo, S. Astbury, C. Baird, S. Bohlen, M. Campbell, C. Colgan, D. Dannheim, C. Gregory, H. Harsh, P. Hatfield, J. Hinojosa, D. Hollatz, Y. Katzir, J. Morton, C. D. Murphy, A. Nurnberg, J. Osterhoff, G. Pérez-Callejo, K. Põder, P. P. Rajeev, C. Roedel , et al. (14 additional authors not shown)

Abstract: We report on a direct search for elastic photon-photon scattering using x-ray and $γがんま$ photons from a laser-plasma based experiment. A gamma photon beam produced by a laser wakefield accelerator provided a broadband gamma spectrum extending to above $E_γがんま= 200$ MeV. These were collided with a dense x-ray field produced by the emission from a laser heated germanium foil at $E_x \approx 1.4$ keV, corr… ▽ More We report on a direct search for elastic photon-photon scattering using x-ray and $γがんま$ photons from a laser-plasma based experiment. A gamma photon beam produced by a laser wakefield accelerator provided a broadband gamma spectrum extending to above $E_γがんま= 200$ MeV. These were collided with a dense x-ray field produced by the emission from a laser heated germanium foil at $E_x \approx 1.4$ keV, corresponding to an invariant mass of $\sqrt{s} = 1.22 \pm 0.22$ MeV. In these asymmetric collisions elastic scattering removes one x-ray and one high-energy $γがんま$ photon and outputs two lower energy $γがんま$ photons. No changes in the $γがんま$ photon spectrum were observed as a result of the collisions allowing us to place a 95% upper bound on the cross section of $1.5 \times 10^{15}\,μみゅー$b. Although far from the QED prediction, this represents the lowest upper limit obtained so far for $\sqrt{s} \lesssim 1$ MeV. △ Less

Submitted 17 July, 2024; originally announced July 2024.

Comments: 6 pages, 10 figures

Supernova Pointing Capabilities of DUNE

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr… ▽ More The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Comments: 25 pages, 16 figures

Report number: FERMILAB-PUB-24-0319-LBNF

Beam shaping by nonlinear moiré metasurfaces

Authors: Lun Qu, Wei Wu, Di Zhang, Chenxiong Wang, Lu Bai, Chenyang Li, Wei Cai, Mengxin Ren, Andrea Alù, Jingjun Xu

Abstract: This paper explores the interplay of momentum transfer and nonlinear optical processes through moiré phenomena. Momentum transfer plays a crucial role in the interaction between photons and matter. Here, we study stacked metasurfaces with tailored dispersion and rotated against each other with varying twisted angles. The stacking introduces interlayer interactions, which can be controlled by the r… ▽ More This paper explores the interplay of momentum transfer and nonlinear optical processes through moiré phenomena. Momentum transfer plays a crucial role in the interaction between photons and matter. Here, we study stacked metasurfaces with tailored dispersion and rotated against each other with varying twisted angles. The stacking introduces interlayer interactions, which can be controlled by the relative angle between metasurfaces, significantly enriching the resulting response compared to the single layer counterpart. By focusing on second-harmonic generation (SHG) from these twisted metasurfaces, we delve into the realm of nonlinear moiré photonics. Through experimental observations, we unveil the emergence of intricate far-field SHG radiation patterns, showing their effective tuning by varying the twisted angles. These findings offer a fresh perspective to explore nonlinear wavefront shaping through moiré phenomena, opening new avenues for nonlinear information processing, optical steering, and nonlinear optical switching. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 10 pages, 5 figures

Enhance the Image: Super Resolution using Artificial Intelligence in MRI

Authors: Ziyu Li, Zihan Li, Haoxiang Li, Qiuyun Fan, Karla L. Miller, Wenchuan Wu, Akshay S. Chaudhari, Qiyuan Tian

Abstract: This chapter provides an overview of deep learning techniques for improving the spatial resolution of MRI, ranging from convolutional neural networks, generative adversarial networks, to more advanced models including transformers, diffusion models, and implicit neural representations. Our exploration extends beyond the methodologies to scrutinize the impact of super-resolved images on clinical an… ▽ More This chapter provides an overview of deep learning techniques for improving the spatial resolution of MRI, ranging from convolutional neural networks, generative adversarial networks, to more advanced models including transformers, diffusion models, and implicit neural representations. Our exploration extends beyond the methodologies to scrutinize the impact of super-resolved images on clinical and neuroscientific assessments. We also cover various practical topics such as network architectures, image evaluation metrics, network loss functions, and training data specifics, including downsampling methods for simulating low-resolution images and dataset selection. Finally, we discuss existing challenges and potential future directions regarding the feasibility and reliability of deep learning-based MRI super-resolution, with the aim to facilitate its wider adoption to benefit various clinical and neuroscientific applications. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: A book chapter in Machine Learning in MRI: From methods to clinical translation. Copyright may be transferred without notice, after which this version may no longer be accessible

Exploring atom-ion Feshbach resonances below the s-wave limit

Authors: Fabian Thielemann, Joachim Siemund, Daniel von Schoenfeld, Wei Wu, Pascal Weckesser, Krzysztof Jachymski, Thomas Walker, Tobias Schaetz

Abstract: Revealing the quantum properties of matter requires a high degree of experimental control accompanied by a profound theoretical understanding. At ultracold temperatures, quantities that appear continuous in everyday life, such as the motional angular momentum of two colliding particles, become quantized, leaving a measurable imprint on experimental results. Embedding a single particle within a lar… ▽ More Revealing the quantum properties of matter requires a high degree of experimental control accompanied by a profound theoretical understanding. At ultracold temperatures, quantities that appear continuous in everyday life, such as the motional angular momentum of two colliding particles, become quantized, leaving a measurable imprint on experimental results. Embedding a single particle within a larger quantum bath at lowest temperatures can result in resonant partial-wave dependent interaction, whose strength near zero energy is dictated by universal threshold scaling laws. Hybrid atom-ion systems have emerged as a novel platform in which a single charged atom in an ultracold bath serves as a well-controlled impurity of variable energy. However, entering the low-energy s-wave regime and exploring the role of higher-partial-wave scattering within has remained an open challenge. Here, we immerse a Barium ion in a cloud of ultracold spin-polarized Lithium atoms, realize tunable collision energies below the s-wave limit and explore resonant higher-partial-wave scattering by studying the energy dependence of Feshbach resonances. Utilizing precise electric field control, we tune the collision energy over four orders of magnitude, reaching from the many-parital-wave to the s-wave regime. At the lowest energies, we probe the energy dependence of an isolated s-wave Feshbach resonance and introduce a theoretical model that allows to distinguish it from higher-partial-wave resonances. Additionally, at energies around the p-wave barrier, we find and identify an open-channel f-wave resonance, consistent with threshold laws. Our findings highlight and benchmark the importance of higher-partial-wave scattering well within the s-wave regime and offer control over chemical reactions and complex many-body dynamics in atom-ion ensembles - on the level of individual angular momentum quanta. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Improving neutrino energy estimation of charged-current interaction events with recurrent neural networks in MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, A. Barnard, G. Barr, D. Barrow, J. Barrow, V. Basque, J. Bateman, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book , et al. (164 additional authors not shown)

Abstract: We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstr… ▽ More We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstructing and summing visible energies, often experience sizable biases and resolution smearing because of the complex nature of neutrino interactions and the detector response. The estimation of neutrino energy can be improved after considering the kinematics information of reconstructed final-state particles. Utilizing kinematic information of reconstructed particles, the deep learning-based approach shows improved resolution and reduced bias for the muon neutrino Monte Carlo simulation sample compared to the traditional approach. In order to address the common concern about the effectiveness of this method on experimental data, the RNN-based energy estimator is further examined and validated with dedicated data-simulation consistency tests using MicroBooNE data. We also assess its potential impact on a neutrino oscillation study after accounting for all statistical and systematic uncertainties and show that it enhances physics sensitivity. This method has good potential to improve the performance of other physics analyses. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Report number: FERMILAB-PUB-24-0287

Hybrid terahertz emitter for pulse shaping and chirality control

Authors: Weipeng Wu, Wilder Acuna, Zhixiang Huang, Xi Wang, Lars Gundlach, Matthew F. Doty, Joshua M. O. Zide, M. Benjamin Jungfleisch

Abstract: Terahertz (THz) radiation, spanning from 0.3 to 3x10^12 Hzへるつ, fills the crucial gap between the microwave and infrared spectral range. THz technology has found applications in various fields, from imaging and sensing to telecommunication and biosensing. However, the full potential of these applications is often hindered by the need for precise control and manipulation of the frequency and polarizati… ▽ More Terahertz (THz) radiation, spanning from 0.3 to 3x10^12 Hzへるつ, fills the crucial gap between the microwave and infrared spectral range. THz technology has found applications in various fields, from imaging and sensing to telecommunication and biosensing. However, the full potential of these applications is often hindered by the need for precise control and manipulation of the frequency and polarization state, which typically requires external THz modulators. Here, we demonstrate a hybrid THz source that overcomes this limitation. Our device consists of two THz emitters integrated into one single device, enabling pulse shaping and chirality control of the emitted radiation without additional external components. The two sources are a spintronic emitter and a semiconductor photoconductive antenna (PCA). Using a combination of dual-wavelength excitation, allowing for control of the relative time delay between the two laser excitation pulses, and tuning external parameters for each emitter (i.e., biasing voltage for the PCA and magnetic field for the spintronic THz emitter) enables precise control of the mixing of the two signals and results in frequency, polarization, and chirality control of the overall THz radiation. This on-chip hybrid emitter provides an essential platform for engineered THz radiation with wide-ranging potential applications. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Symmetry breaking of three self-organization rules:A general theory for the origin of complexity

Authors: Wen-Hao Wu, Ze-Zheng Li, Wen-Xu Wang

Abstract: Complex spatiotemporal patterns in nature significantly challenge reductionism-based modern science. The lack of a paradigm beyond reductionism hinders our understanding of the emergence of complexity. The diversity of countless patterns undermines any notion of universal mechanisms. Here, however, we show that breaking the symmetry of three simple and self-organization rules give rise to nearly a… ▽ More Complex spatiotemporal patterns in nature significantly challenge reductionism-based modern science. The lack of a paradigm beyond reductionism hinders our understanding of the emergence of complexity. The diversity of countless patterns undermines any notion of universal mechanisms. Here, however, we show that breaking the symmetry of three simple and self-organization rules give rise to nearly all patterns in nature, such as a wide variety of Turing patterns, fractals, spiral, target and plane waves, as well as chaotic patterns. The symmetry breaking is rooted in basic physical quantities, such as positive and negative forces, space, time and bounds. Besides reproducing the hallmarks of complexity, we discover some novel phenomena, such as abrupt percolation of Turing patterns, phase transition between fractals and chaos, chaotic edge in travelling waves, etc. Our asymmetric self-organization theory established a simple and unified framework for the origin of complexity in all fields, and unveiled a deep relationship between the first principles of physics and the complex world △ Less

Submitted 24 May, 2024; originally announced May 2024.

Comments: 97 pages, 60 figures, for full article, see https://doi.org/10.1142/S021812742430012X

Journal ref: International Journal of Bifurcation and Chaos;Vol. 34, No. 06, 2430012 (2024)

Impurity-level induced broadband photoelectric response in wide-band semiconductor SrSnO3

Authors: Yuyang Zhang, Lisheng Wang, Weijie Wu, Zhaoyang Wang, Fei Sun, He Jiang, Bangmin Zhang, Yue Zheng

Abstract: Broadband spectrum detectors exhibit great promise in fields such as multispectral imaging and optical communications. Despite significant progress, challenges like materials instability, complex manufacturing process and high costs still hinder further application. Here we present a method that achieves broadband spectral detect by impurity-level in SrSnO3. We report over 200 mA/W photo-responsiv… ▽ More Broadband spectrum detectors exhibit great promise in fields such as multispectral imaging and optical communications. Despite significant progress, challenges like materials instability, complex manufacturing process and high costs still hinder further application. Here we present a method that achieves broadband spectral detect by impurity-level in SrSnO3. We report over 200 mA/W photo-responsivity at 275 nm (ultraviolet C solar-bind) and 367 nm (ultraviolet A) and ~ 1 mA/W photo-responsivity at 532 nm and 700 nm (visible) with a voltage bias of 5V. Further transport and photoluminescence results indicate that the broadband response comes from the impurity levels and mutual interactions. Additionally, the photodetector demonstrates excellent robustness and stability under repeated tests and prolonged exposure in air. These findings show the potential of SSO photodetectors and propose a method to achieve broadband spectrum detection, creating new possibility for the development of single-phase, low-cost, simple structure and high-efficiency photodetectors. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: 5 Figures

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Realization of a Two-Dimensional Lieb Lattice in a Metal-Inorganic Framework with Flat Bands and Topological Edge States

Authors: Wenjun Wu, Shuo Sun, Chi Sin Tang, Jing Wu, Yu Ma, Lingfeng Zhang, Chuanbing Cai, Jianxin Zhong, Milorad V. Milošević, Andrew T. S. Wee, Xinmao Yin

Abstract: Flat bands and Dirac cones in materials are at the source of the exotic electronic and topological properties. The Lieb lattice is expected to host these electronic structures, arising from quantum destructive interference. Nevertheless, the experimental realization of a two-dimensional Lieb lattice remained challenging to date due to its intrinsic structural instability. After computationally des… ▽ More Flat bands and Dirac cones in materials are at the source of the exotic electronic and topological properties. The Lieb lattice is expected to host these electronic structures, arising from quantum destructive interference. Nevertheless, the experimental realization of a two-dimensional Lieb lattice remained challenging to date due to its intrinsic structural instability. After computationally designing a Platinum-Phosphorus (Pt-P) Lieb lattice, we have successfully overcome its structural instability and synthesized it on a gold substrate via molecular beam epitaxy. Low-temperature scanning tunneling microscopy and spectroscopy verified the Lieb lattice's morphology and electronic flat bands. Furthermore, topological Dirac edge states stemming from pronounced spin-orbit coupling induced by heavy Pt atoms have been predicted. These findings convincingly open perspectives for creating metal-inorganic framework-based atomic lattices, offering prospects for strongly correlated phases interplayed with topology. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: 24 pages,11 figures

Measurement of the differential cross section for neutral pion production in charged-current muon neutrino interactions on argon with the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, M. B. Brunetti, L. Camilleri , et al. (163 additional authors not shown)

Abstract: We present a measurement of neutral pion production in charged-current interactions using data recorded with the MicroBooNE detector exposed to Fermilab's booster neutrino beam. The signal comprises one muon, one neutral pion, any number of nucleons, and no charged pions. Studying neutral pion production in the MicroBooNE detector provides an opportunity to better understand neutrino-argon interac… ▽ More We present a measurement of neutral pion production in charged-current interactions using data recorded with the MicroBooNE detector exposed to Fermilab's booster neutrino beam. The signal comprises one muon, one neutral pion, any number of nucleons, and no charged pions. Studying neutral pion production in the MicroBooNE detector provides an opportunity to better understand neutrino-argon interactions, and is crucial for future accelerator-based neutrino oscillation experiments. Using a dataset corresponding to $6.86 \times 10^{20}$ protons on target, we present single-differential cross sections in muon and neutral pion momenta, scattering angles with respect to the beam for the outgoing muon and neutral pion, as well as the opening angle between the muon and neutral pion. Data extracted cross sections are compared to generator predictions. We report good agreement between the data and the models for scattering angles, except for an over-prediction by generators at muon forward angles. Similarly, the agreement between data and the models as a function of momentum is good, except for an underprediction by generators in the medium momentum ranges, $200-400$ MeV for muons and $100-200$ MeV for pions. △ Less

Submitted 6 May, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Report number: FERMILAB-PUB-24-0142-CSAID-PPD

Intelligent Chemical Purification Technique Based on Machine Learning

Authors: Wenchao Wu, Hao Xu, Dongxiao Zhang, Fanyang Mo

Abstract: We present an innovative of artificial intelligence with column chromatography, aiming to resolve inefficiencies and standardize data collection in chemical separation and purification domain. By developing an automated platform for precise data acquisition and employing advanced machine learning algorithms, we constructed predictive models to forecast key separation parameters, thereby enhancing… ▽ More We present an innovative of artificial intelligence with column chromatography, aiming to resolve inefficiencies and standardize data collection in chemical separation and purification domain. By developing an automated platform for precise data acquisition and employing advanced machine learning algorithms, we constructed predictive models to forecast key separation parameters, thereby enhancing the efficiency and quality of chromatographic processes. The application of transfer learning allows the model to adapt across various column specifications, broadening its utility. A novel metric, separation probability ($S_p$), quantifies the likelihood of effective compound separation, validated through experimental verification. This study signifies a significant step forward int the application of AI in chemical research, offering a scalable solution to traditional chromatography challenges and providing a foundation for future technological advancements in chemical analysis and purification. △ Less

Submitted 13 April, 2024; originally announced April 2024.

Comments: 22 pages, 5 Figures, Submitted to Nature Machine Intelligence

Electro-optically Modulated Nonlinear Metasurfaces

Authors: Zhengqing He, Lun Qu, Wei Wu, Jikun Liu, Jingfei You, Weiye Liu, Lu Bai, Chunyan Jin, Chenxiong Wang, Zhidong Gu, Wei Cai, Mengxin Ren, Jingjun Xu

Abstract: Tunable nonlinearity facilitates the creation of reconfigurable nonlinear metasurfaces, enabling innovative applications in signal processing, light switching, and sensing. This paper presents a novel approach to electrically modulate SHG from a lithium niobate (LN) metasurface, exploiting the electro-optical (EO) effect. By fabricating a nanohole array metasurface on a thin LN film and applying a… ▽ More Tunable nonlinearity facilitates the creation of reconfigurable nonlinear metasurfaces, enabling innovative applications in signal processing, light switching, and sensing. This paper presents a novel approach to electrically modulate SHG from a lithium niobate (LN) metasurface, exploiting the electro-optical (EO) effect. By fabricating a nanohole array metasurface on a thin LN film and applying an electric field, we demonstrate the alteration of the material's refractive index, resulting in resonance shifts and modulation of SHG intensity at specific wavelengths. Our findings provide valuable insights for the development of electrically tunable nonlinear light sources, quantum optics, dynamic nonlinear holography, and nonlinear information processing. △ Less

Submitted 11 April, 2024; originally announced April 2024.

Comments: 4 pages, 4 figures

Thrust Generation by Shark Denticles

Authors: Benjamin S. Savino, Wen Wu

Abstract: DNS is performed for flow separation over a bump in a turbulent channel. Comparisons are made between a smooth bump configuration and one where the lee side is covered with replicas of complete shark denticles. As flow over the bump is under an adverse pressure gradient (APG), a reversed pore flow (RPF) is formed in the porous cavities underneath the crowns of the denticle array. Remarkable thrust… ▽ More DNS is performed for flow separation over a bump in a turbulent channel. Comparisons are made between a smooth bump configuration and one where the lee side is covered with replicas of complete shark denticles. As flow over the bump is under an adverse pressure gradient (APG), a reversed pore flow (RPF) is formed in the porous cavities underneath the crowns of the denticle array. Remarkable thrust is generated by the RPF as denticle necks accelerate the fluid passing between them in the upstream streamwise direction. Several geometrical features of shark denticle, including some that had not previously been considered hydrodynamically functional, are identified to form an anisotropic permeable porous media that enables and sustains the RPF and thrust generation. The RPF is activated by the APG before massive flow reversal. The results indicate a proactive, on-demand drag reduction mechanism that leverages and transforms the APG into a favorable outcome. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Comments: 10 pages, 6 figures, submitted to Journal of Fluid Mechanics

Impact of Spanwise Rotation on Flow Separation and Recovery Behind a Bulge in Channel Flows

Authors: Benjamin S. Savino, Wen Wu

Abstract: Direct numerical simulations of spanwise-rotating turbulent channel flow with a parabolic bump on the bottom wall are employed to investigate the effects of rotation on flow separation. Four rotation rates of $Ro_b := 2ΩおーむH/U_b = \pm 0.42, \; \pm 1.0$ are compared with the non-rotating scenario. The mild adverse pressure gradient induced by the lee side of the bump allows for a variable pressure-ind… ▽ More Direct numerical simulations of spanwise-rotating turbulent channel flow with a parabolic bump on the bottom wall are employed to investigate the effects of rotation on flow separation. Four rotation rates of $Ro_b := 2ΩおーむH/U_b = \pm 0.42, \; \pm 1.0$ are compared with the non-rotating scenario. The mild adverse pressure gradient induced by the lee side of the bump allows for a variable pressure-induced separation. The separation region is reduced (increased) when the bump is on the anti-cyclonic (cyclonic) side of the channel, compared with the non-rotating separation. The total drag is reduced in all rotating cases. Through several mechanisms, rotation alters the onset of separation, reattachment, and wake recovery. The mean momentum deficit is found to be the key. A physical interpretation of the ratio between the system rotation and mean shear vorticity, $S:=Ωおめが/Ωおめが_s$, provides the mechanisms regarding stability thresholds of $S=-0.5$ and $-1$. The rotation effects are explained accordingly with reference to the dynamics of several flow structures. For anti-cyclonic separation, particularly, the interaction between the Taylor-Görtler vortices and hairpin vortices of wall-bounded turbulence is proven to be responsible for the breakdown of the separating shear layer. A generalized argument is made regarding the essential role of near-wall deceleration and resultant ejection of enhanced hairpin vortices in destabilizing an anti-cyclonic flow. This mechanism is anticipated to have broad impacts on other applications in analogy to rotating shear flows, such as thermal convection and boundary layers over concave walls. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Comments: 38 pages, 19 figures, submitted to Journal of Fluid Mechanics

Detecting Neutrinos from Supernova Bursts in PandaX-4T

Authors: Binyu Pang, Abdusalam Abdukerim, Zihao Bo, Wei Chen, Xun Chen, Chen Cheng, Zhaokan Cheng, Xiangyi Cui, Yingjie Fan, Deqing Fang, Changbo Fu, Mengting Fu, Lisheng Geng, Karl Giboni, Linhui Gu, Xuyuan Guo, Chencheng Han, Ke Han, Changda He, Jinrong He, Di Huang, Yanlin Huang, Junting Huang, Zhou Huang, Ruquan Hou , et al. (71 additional authors not shown)

Abstract: Neutrinos from core-collapse supernovae are essential for the understanding of neutrino physics and stellar evolution. The dual-phase xenon dark matter detectors can provide a way to track explosions of galactic supernovae by detecting neutrinos through coherent elastic neutrino-nucleus scatterings. In this study, a variation of progenitor masses as well as explosion models are assumed to predict… ▽ More Neutrinos from core-collapse supernovae are essential for the understanding of neutrino physics and stellar evolution. The dual-phase xenon dark matter detectors can provide a way to track explosions of galactic supernovae by detecting neutrinos through coherent elastic neutrino-nucleus scatterings. In this study, a variation of progenitor masses as well as explosion models are assumed to predict the neutrino fluxes and spectra, which result in the number of expected neutrino events ranging from 6.6 to 13.7 at a distance of 10 kpc over a 10-second duration with negligible backgrounds at PandaX-4T. Two specialized triggering alarms for monitoring supernova burst neutrinos are built. The efficiency of detecting supernova explosions at various distances in the Milky Way is estimated. These alarms will be implemented in the real-time supernova monitoring system at PandaX-4T in the near future, providing the astronomical communities with supernova early warnings. △ Less

Submitted 10 March, 2024; originally announced March 2024.

Comments: 9 pages,6 figures

Signal Response Model in PandaX-4T

Authors: Yunyang Luo, Zihao Bo, Shibo Zhang, Abdusalam Abdukerim, Chen Cheng, Wei Chen, Xun Chen, Yunhua Chen, Zhaokan Cheng, Xiangyi Cui, Yingjie Fan, Deqing Fang, Changbo Fu, Mengting Fu, Lisheng Geng, Karl Giboni, Linhui Gu, Xuyuan Guo, Chencheng Han, Ke Han, Changda He, Jinrong He, Di Huang, Yanlin Huang, Zhou Huang , et al. (66 additional authors not shown)

Abstract: PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of simultaneously collecting the primary scintillation and ionization signals, utilizing their ratio to discriminate dark matter signals from background sources such as ga… ▽ More PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of simultaneously collecting the primary scintillation and ionization signals, utilizing their ratio to discriminate dark matter signals from background sources such as gamma rays and beta particles. The signal response model plays a crucial role in interpreting the data obtained by PandaX-4T. It describes the conversion from the deposited energy by dark matter interactions to the detectable signals within the detector. The signal response model is utilized in various PandaX-4T results. This work provides a comprehensive description of the procedures involved in constructing and parameter-fitting the signal response model for the energy range of approximately 1 keV to 25 keV for electronic recoils and 6 keV to 90 keV for nuclear recoils. It also covers the signal reconstruction, selection, and correction methods, which are crucial components integrated into the signal response model. △ Less

Submitted 14 June, 2024; v1 submitted 7 March, 2024; originally announced March 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Front-end electronics development of large-area SiPM arrays for high-precision single-photon time measurement

Authors: Wei Zhi, Ruike Cao, Jiannan Tang, Mingxin Wang, Yongqi Tan, Weihao Wu, Donglian Xu

Abstract: TRopIcal DEep-sea Neutrino Telescope (TRIDENT) plans to incorporate silicon photomultipliers (SiPMs) with superior time resolution in addition to photomultiplier tubes (PMTs) into its detection units, namely hybrid Digital Optical Modules (hDOMs), to improve its angular resolution. However, the time resolution significantly degrades for large-area SiPMs due to the large detector capacitance, posin… ▽ More TRopIcal DEep-sea Neutrino Telescope (TRIDENT) plans to incorporate silicon photomultipliers (SiPMs) with superior time resolution in addition to photomultiplier tubes (PMTs) into its detection units, namely hybrid Digital Optical Modules (hDOMs), to improve its angular resolution. However, the time resolution significantly degrades for large-area SiPMs due to the large detector capacitance, posing significant challenges for the readout electronics of SiPMs in hDOM. We analyzed the influences of series and parallel connections when constructing a large-area SiPM array and designed a series-parallel connection SiPM array with differential output. We also designed a high-speed pre-amplifier based on transformers (MABA-007159) and radio frequency amplifiers (BGA2803), and an analog multi-channel summing circuit based on operational amplifiers (LMH6629). We measured the single photon time resolution (SPTR) of a $4\times4$ SiPM (Hamamatsu S13360-3050PE) array ($12\times12~\mathrm{mm}^2$) of approximately 300 ps FWHM. This front-end readout design enables the large-area SiPM array to achieve high-precision single photon time measurement in one readout channel. △ Less

Submitted 7 June, 2024; v1 submitted 5 March, 2024; originally announced March 2024.

Comments: Revised version. 12 pages, 10 figures

Microwave-to-optics conversion using magnetostatic modes and a tunable optical cavity

Authors: Wei-Jiang Wu, Yi-Pu Wang, Jie Li, Gang Li, J. Q. You

Abstract: Quantum computing, quantum communication and quantum networks rely on hybrid quantum systems operating in different frequency ranges. For instance, the superconducting qubits work in the gigahertz range, while the optical photons used in communication are in the range of hundreds of terahertz. Due to the large frequency mismatch, achieving the direct coupling and information exchange between diffe… ▽ More Quantum computing, quantum communication and quantum networks rely on hybrid quantum systems operating in different frequency ranges. For instance, the superconducting qubits work in the gigahertz range, while the optical photons used in communication are in the range of hundreds of terahertz. Due to the large frequency mismatch, achieving the direct coupling and information exchange between different information carriers is generally difficult. Accordingly, a quantum interface is demanded, which serves as a bridge to establish information linkage between different quantum systems operating at distinct frequencies. Recently, the magnon mode in ferromagnetic spin systems has received significant attention. While the inherent weak optomagnonic coupling strength restricts the microwave-to-optical photon conversion efficiency using magnons, the versatility of the magnon modes, together with their readily achievable strong coupling with other quantum systems, endow them with many distinct advantages. Here, we realize the magnon-based microwave-light interface by adopting an optical cavity with adjustable free spectrum range and different kinds of magnetostatic modes in two microwave cavity configurations. By optimizing the parameters, an internal conversion efficiency of $1.28 \times 10^{-7}$ is achieved. We analyze the impact of various parameters on the microwave-to-optics conversion. The study provides useful guidance and insights to further enhancing the microwave-to-optics conversion efficiency using magnons. △ Less

Submitted 4 March, 2024; v1 submitted 1 March, 2024; originally announced March 2024.

Comments: 11 pages 7 figures

Journal ref: Laser Photonics Rev 2024, 2400648

Identifying heterogeneous micromechanical properties of biological tissues via physics-informed neural networks

Authors: Wensi Wu, Mitchell Daneker, Kevin T. Turner, Matthew A. Jolley, Lu Lu

Abstract: The heterogeneous micromechanical properties of biological tissues have profound implications across diverse medical and engineering domains. However, identifying full-field heterogeneous elastic properties of soft materials using traditional engineering approaches is fundamentally challenging due to difficulties in estimating local stress fields. Recently, there has been a growing interest in usi… ▽ More The heterogeneous micromechanical properties of biological tissues have profound implications across diverse medical and engineering domains. However, identifying full-field heterogeneous elastic properties of soft materials using traditional engineering approaches is fundamentally challenging due to difficulties in estimating local stress fields. Recently, there has been a growing interest in using data-driven models to learn full-field mechanical responses such as displacement and strain from experimental or synthetic data. However, research studies on inferring full-field elastic properties of materials, a more challenging problem, are scarce, particularly for large deformation, hyperelastic materials. Here, we propose a physics-informed machine learning approach to identify the elasticity map in nonlinear, large deformation hyperelastic materials. We evaluate the prediction accuracies and computational efficiency of physics-informed neural networks (PINNs) by inferring the heterogeneous elasticity maps across three materials with structural complexity that closely resemble real tissue patterns, such as brain tissue and tricuspid valve tissue. We further applied our improved architecture to three additional examples of breast cancer tissue and extended our analysis to three hyperelastic constitutive models: Neo-Hookean, Mooney Rivlin, and Gent. Our selected network architecture consistently produced highly accurate estimations of heterogeneous elasticity maps, even when there was up to 10% noise present in the training data. △ Less

Submitted 17 July, 2024; v1 submitted 16 February, 2024; originally announced February 2024.

Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1297 additional authors not shown)

Abstract: Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 720 t of total liquid argon mass with 410 t of fiducial mass. A 5.4 ppm nitrogen contamination was present during the xenon doping campaign. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 2 August, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 36 pages, 20 figures. Corrected author list; corrected typos across paper and polished text

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

Self-navigated 3D diffusion MRI using an optimized CAIPI sampling and structured low-rank reconstruction

Authors: Ziyu Li, Karla L. Miller, Xi Chen, Mark Chiew, Wenchuan Wu

Abstract: 3D multi-slab acquisitions are an appealing approach for diffusion MRI because they are compatible with the imaging regime delivering optimal SNR efficiency. In conventional 3D multi-slab imaging, shot-to-shot phase variations caused by motion pose challenges due to the use of multi-shot k-space acquisition. Navigator acquisition after each imaging echo is typically employed to correct phase varia… ▽ More 3D multi-slab acquisitions are an appealing approach for diffusion MRI because they are compatible with the imaging regime delivering optimal SNR efficiency. In conventional 3D multi-slab imaging, shot-to-shot phase variations caused by motion pose challenges due to the use of multi-shot k-space acquisition. Navigator acquisition after each imaging echo is typically employed to correct phase variations, which prolongs scan time and increases the specific absorption rate (SAR). The aim of this study is to develop a highly efficient, self-navigated method to correct for phase variations in 3D multi-slab diffusion MRI without explicitly acquiring navigators. The sampling of each shot is carefully designed to intersect with the central kz plane of each slab, and the multi-shot sampling is optimized for self-navigation performance while retaining decent reconstruction quality. The central kz intersections from all shots are jointly used to reconstruct a 2D phase map for each shot using a structured low-rank constrained reconstruction that leverages the redundancy in shot and coil dimensions. The phase maps are used to eliminate the shot-to-shot phase inconsistency in the final 3D multi-shot reconstruction. We demonstrate the method's efficacy using retrospective simulations and prospectively acquired in-vivo experiments at 1.22 mm and 1.09 mm isotropic resolutions. Compared to conventional navigated 3D multi-slab imaging, the proposed self-navigated method achieves comparable image quality while shortening the scan time by 31.7% and improving the SNR efficiency by 15.5%. The proposed method produces comparable quality of DTI and white matter tractography to conventional navigated 3D multi-slab acquisition with a much shorter scan time. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Comments: 10 pages, 11 figures, 2 tables. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

A Novel Estimation Method for Temperature of Magnetic Nanoparticles Dominated by Brownian Relaxation Based on Magnetic Particle Spectroscopy

Authors: Zhongzhou Du, Gaoli Zhao, Zhanpeng Hua, Na Ye, Yi Sun, Wenjie Wu, Haochen Zhang, Longtu Yu, Shijie Han, Haozhe Wang, Wenzhong Liu, Takashi Yoshida

Abstract: This paper presents a novel method for estimating the temperature of magnetic nanoparticles (MNPs) based on AC magnetization harmonics of MNPs dominated by Brownian relaxation. The difference in the AC magnetization response and magnetization harmonic between the Fokker-Planck equation and the Langevin function was analyzed, and we studied the relationship between the magnetization harmonic and th… ▽ More This paper presents a novel method for estimating the temperature of magnetic nanoparticles (MNPs) based on AC magnetization harmonics of MNPs dominated by Brownian relaxation. The difference in the AC magnetization response and magnetization harmonic between the Fokker-Planck equation and the Langevin function was analyzed, and we studied the relationship between the magnetization harmonic and the key factors, such as Brownian relaxation time, temperature, magnetic field strength, core size and hydrodynamic size of MNPs, excitation frequency, and so on. We proposed a compensation function for AC magnetization harmonic with consideration of the key factors and the difference between the Fokker-Planck equation and the Langevin function. Then a temperature estimation model based on the compensation function and the Langevin function was established. By employing the least squares algorithm, the temperature was successfully calculated. The experimental results show that the temperature error is less than 0.035 K in the temperature range from 310 K to 320 K. The temperature estimation model is expected to improve the performance of the magnetic nanoparticle thermometer and be applied to magnetic nanoparticle-mediated hyperthermia. △ Less

Submitted 31 December, 2023; originally announced January 2024.

Waveform Simulation in PandaX-4T

Authors: Jiafu Li, Abdusalam Abdukerim, Chen Cheng, Zihao Bo, Wei Chen, Xun Chen, Yunhua Chen, Zhaokan Cheng, Xiangyi Cui, Yingjie Fan, Deqing Fang, Changbo Fu, Mengting Fu, Lisheng Geng, Karl Giboni, Linhui Gu, Xuyuan Guo, Chencheng Han, Ke Han, Changda He, Jinrong He, Di Huang, Yanlin Huang, Zhou Huang, Ruquan Hou , et al. (66 additional authors not shown)

Abstract: Signal reconstruction through software processing is a crucial component of the background and signal models in the PandaX-4T experiment, which is a multi-tonne dark matter direct search experiment. The accuracy of signal reconstruction is influenced by various detector artifacts, including noise, dark count of photomultiplier, impurity photoionization in the detector, and other relevant considera… ▽ More Signal reconstruction through software processing is a crucial component of the background and signal models in the PandaX-4T experiment, which is a multi-tonne dark matter direct search experiment. The accuracy of signal reconstruction is influenced by various detector artifacts, including noise, dark count of photomultiplier, impurity photoionization in the detector, and other relevant considerations. In this study, we present a detailed description of a semi-data-driven approach designed to simulate the signal waveform. This work provides a reliable model for the efficiency and bias of the signal reconstruction in the data analysis of PandaX-4T. By comparing critical variables which relate to the temporal shape and hit pattern of the signals, we demonstrate a good agreement between the simulation and data. △ Less

Submitted 21 May, 2024; v1 submitted 18 December, 2023; originally announced December 2023.

Journal ref: Chin. Phys. C 48, no.7,073001 (2024)

The Extended Resonant Modal Theory and Its Applications

Authors: Ruqi Xiao, Wen Geyi, Guo Yang, Wen Wu

Abstract: In this paper, we extend the resonant modal theory (RMT) developed previously for a metal object to an arbitrary source region consisting of metals, dielectrics, or the combination of both. The influences of dielectrics on the fields are replaced by equivalent volume sources through the use of the compensation theorem in electromagnetic theory. The resonant frequencies can be determined by finding… ▽ More In this paper, we extend the resonant modal theory (RMT) developed previously for a metal object to an arbitrary source region consisting of metals, dielectrics, or the combination of both. The influences of dielectrics on the fields are replaced by equivalent volume sources through the use of the compensation theorem in electromagnetic theory. The resonant frequencies can be determined by finding the roots of the determinant of the matrix resulted from the discretization of the real homogeneous volume-surface integral equation derived from the requirement that the difference of stored field energies in the source region vanishes. As applications of the extended RMT, three examples have been investigated. The first example is a dielectric resonator antenna, and is designed by exciting the first resonant mode of the composite structure in which the dielectric cylinder is combined with a conformal metallic strip. The second example is a dual-band dielectric-coated metallic wire antenna. The third example studies the resonant modes of a rectangular patch antenna. △ Less

Submitted 6 December, 2023; originally announced December 2023.

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Foundations of Quantum Information for Physical Chemistry

Authors: Weijun Wu, Gregory D. Scholes

Abstract: Quantum information, a field in which great advances have been made in the past decades, now presents opportunities for chemistry. One roadblock to progress, especially for experimental chemical science, is that new concepts and technical definitions need to be learned. In this paper, we review some basic, but sometimes misunderstood, concepts of quantum information based on the mathematical formu… ▽ More Quantum information, a field in which great advances have been made in the past decades, now presents opportunities for chemistry. One roadblock to progress, especially for experimental chemical science, is that new concepts and technical definitions need to be learned. In this paper, we review some basic, but sometimes misunderstood, concepts of quantum information based on the mathematical formulation of quantum mechanics that will be useful for chemists interested in discovering ways that chemistry can contribute to the quantum information field. We cover topics including qubits and their density matrix formalism, quantum measurement as a quantum operation, information theory, and entanglement. We focus on the difference between the concepts in the quantum context and the classic context. We also discuss the relation and distinction among entanglement, correlation, and coherence. We aim to clarify the rigorous definition of these concepts, and then indicate some examples in physical chemistry. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Transmission infrared micro-spectroscopic study of individual human hair

Authors: Chen Li, Yuhan Du, Haonan Chen, Xinxin Han, Wenbin Wu, Xiufang Kong, Cheng Zhang, Xiang Yuan

Abstract: Understanding the optical transmission property of human hair, especially in the infrared regime, is vital in physical, clinical, and biomedical research. However, the majority of infrared spectroscopy on human hair is performed in the reflection mode, which only probes the absorptance of the surface layer. The direct transmission spectrum of individual hair without horizontal cut offers a rapid a… ▽ More Understanding the optical transmission property of human hair, especially in the infrared regime, is vital in physical, clinical, and biomedical research. However, the majority of infrared spectroscopy on human hair is performed in the reflection mode, which only probes the absorptance of the surface layer. The direct transmission spectrum of individual hair without horizontal cut offers a rapid and non-destructive test of the hair cortex but is less investigated experimentally due to the small size and strong absorption of the hair. In this work, we conduct transmission infrared micro-spectroscopic study on individual human hair. By utilizing direct measurements of the transmission spectrum using a Fourier-transform infrared microscope, the human hair is found to display prominent band filtering behavior. The high spatial resolution of infrared micro-spectroscopy further allows the comparison among different regions of hair. In a case study of adult-onset Still's disease, the corresponding infrared transmission exhibits systematic variations of spectral weight as the disease evolves. The geometry effect of the internal hair structure is further quantified using the finite-element simulation. The results imply that the variation of spectral weight may relate to the disordered microscopic structure variation of the hair cortex during the inflammatory attack. Our work reveals the potential of hair infrared transmission spectrum in tracing the variation of hair cortex retrospectively. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Layer-by-Layer Assembled Nanowire Networks Enable Graph Theoretical Design of Multifunctional Coatings

Authors: Wenbing Wu, Alain Kadar, Sang Hyun Lee, Bum Chul Park, Jeffery E. Raymond, Thomas K. Tsotsis, Carlos E. S. Cesnik, Sharon C. Glotzer, Valerie Goss, Nicholas A. Kotov

Abstract: Multifunctional coatings are central for information, biomedical, transportation and energy technologies. These coatings must possess hard-to-attain properties and be scalable, adaptable, and sustainable, which makes layer-by-layer assembly (LBL) of nanomaterials uniquely suitable for these technologies. What remains largely unexplored is that LBL enables computational methodologies for structural… ▽ More Multifunctional coatings are central for information, biomedical, transportation and energy technologies. These coatings must possess hard-to-attain properties and be scalable, adaptable, and sustainable, which makes layer-by-layer assembly (LBL) of nanomaterials uniquely suitable for these technologies. What remains largely unexplored is that LBL enables computational methodologies for structural design of these composites. Utilizing silver nanowires (NWs), we develop and validate a graph theoretical (GT) description of their LBL composites. GT successfully describes the multilayer structure with nonrandom disorder and enables simultaneous rapid assessment of several properties of electrical conductivity, electromagnetic transparency, and anisotropy. GT models for property assessment can be rapidly validated due to (1) quasi-2D confinement of NWs and (2) accurate microscopy data for stochastic organization of the NW networks. We finally show that spray-assisted LBL offers direct translation of the GT-based design of composite coatings to additive, scalable manufacturing of drone wings with straightforward extensions to other technologies. △ Less

Submitted 30 October, 2023; v1 submitted 23 October, 2023; originally announced October 2023.

Results and Limits of Time Division Multiplexing for the BICEP Array High Frequency Receivers

Authors: S. Fatigoni, P. A. R. Ade, Z. Ahmed, M. Amiri, D. Barkats, R. Basu Thakur, C. A. Bischoff, D. Beck, J. J. Bock, V. Buza, J. Cheshire, J. Connors, J. Cornelison, M. Crumrine, A. J. Cukierman, E. V. Denison, M. I. Dierickx, L. Duband, M. Eiben, J. P. Filippini, A. Fortes, M. Gao, C. Giannakopoulos, N. Goeckner-Wald, D. C. Goldfinger , et al. (62 additional authors not shown)

Abstract: Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the… ▽ More Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the focal plane. The constraints set by these two receivers required a redesign of the warm readout electronics. The new version of the standard Multi Channel Electronics, developed and built at the University of British Columbia, is presented here for the first time. BICEP Array operates Time Division Multiplexing readout technology to the limits of its capabilities in terms of multiplexing rate, noise and crosstalk, and applies them in rigorously demanding scientific application requiring extreme noise performance and systematic error control. Future experiments like CMB-S4 plan to use TES bolometers with Time Division/SQUID-based readout for an even larger number of detectors. △ Less

Submitted 24 October, 2023; v1 submitted 16 October, 2023; originally announced October 2023.

Comments: 10 pages, 7 figures, Submitted to Journal of Low Temperature Physics

Journal ref: Journal of Low Temperature Physics (2024)

Search for heavy neutral leptons in electron-positron and neutral-pion final states with the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, M. B. Brunetti, L. Camilleri , et al. (163 additional authors not shown)

Abstract: We present the first search for heavy neutral leptons (HNL) decaying into $νにゅーe^+e^-$ or $νにゅーπぱい^0$ final states in a liquid-argon time projection chamber using data collected with the MicroBooNE detector. The data were recorded synchronously with the NuMI neutrino beam from Fermilab's Main Injector corresponding to a total exposure of $7.01 \times 10^{20}$ protons on target. We set upper limits at the… ▽ More We present the first search for heavy neutral leptons (HNL) decaying into $νにゅーe^+e^-$ or $νにゅーπぱい^0$ final states in a liquid-argon time projection chamber using data collected with the MicroBooNE detector. The data were recorded synchronously with the NuMI neutrino beam from Fermilab's Main Injector corresponding to a total exposure of $7.01 \times 10^{20}$ protons on target. We set upper limits at the $90\%$ confidence level on the mixing parameter $\lvert U_{μみゅー4}\rvert^2$ in the mass ranges $10\le m_{\rm HNL}\le 150$ MeV for the $νにゅーe^+e^-$ channel and $150\le m_{\rm HNL}\le 245$ MeV for the $νにゅーπぱい^0$ channel, assuming $\lvert U_{e 4}\rvert^2 = \lvert U_{τたう4}\rvert^2 = 0$. These limits represent the most stringent constraints in the mass range $35<m_{\rm HNL}<175$ MeV and the first constraints from a direct search for $νにゅーπぱい^0$ decays. △ Less

Submitted 12 January, 2024; v1 submitted 11 October, 2023; originally announced October 2023.

Comments: Version as accepted by Physical Review Letters, some presentational changes and updated references, no changes to results

Report number: FERMILAB-PUB-23-574-ND

Tunable quantum dots in monolithic Fabry-Perot microcavities for high-performance single-photon sources

Authors: Jiawei Yang, Yan Chen, Zixuan Rao, Ziyang Zheng, Changkun Song, Yujie Chen, Kaili Xiong, Pingxing Chen, Chaofan Zhang, Wei Wu, Ying Yu, Siyuan Yu

Abstract: Cavity-enhanced single quantum dots (QDs) are the main approach towards ultra-high-performance solid-state quantum light sources for scalable photonic quantum technologies. Nevertheless, harnessing the Purcell effect requires precise spectral and spatial alignment of the QDs' emission with the cavity mode, which is challenging for most cavities. Here we have successfully integrated miniaturized Fa… ▽ More Cavity-enhanced single quantum dots (QDs) are the main approach towards ultra-high-performance solid-state quantum light sources for scalable photonic quantum technologies. Nevertheless, harnessing the Purcell effect requires precise spectral and spatial alignment of the QDs' emission with the cavity mode, which is challenging for most cavities. Here we have successfully integrated miniaturized Fabry-Perot microcavities with a piezoelectric actuator, and demonstrated a bright single photon source derived from a deterministically coupled QD within this microcavity. Leveraging the cavity-membrane structures, we have achieved large spectral-tunability via strain tuning. On resonance, we have obtained a high Purcell factor of approximately 9. The source delivers single photons with simultaneous high extraction efficiency of 0.58, high purity of 0.956(2) and high indistinguishability of 0.922(4). Together with a small footprint, our scheme facilitates the scalable integration of indistinguishable quantum light sources on-chip, and therefore removes a major barrier to the solid-state quantum information platforms based on QDs. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Comments: 12 pages, 4 figures

Neuromorphic nanocluster networks: Critical role of the substrate in nano-link formation

Authors: Wenkai Wu, Alexey V. Verkhovtsev, Theodoros Pavloudis, Andrey V. Solov'yov, Richard E. Palmer

Abstract: Atomic cluster-based networks represent a promising architecture for the realization of neuromorphic computing systems, which may overcome some of the limitations of the current computing paradigm. The formation and breakage of synapses between the clusters are of utmost importance for the functioning of these computing systems. This paper reports the results of molecular dynamics simulations of s… ▽ More Atomic cluster-based networks represent a promising architecture for the realization of neuromorphic computing systems, which may overcome some of the limitations of the current computing paradigm. The formation and breakage of synapses between the clusters are of utmost importance for the functioning of these computing systems. This paper reports the results of molecular dynamics simulations of synapse (bridge) formation at elevated temperatures and thermal breaking processes between 2.8 nanometer-sized Au$_{1415}$ clusters deposited on a carbon substrate, a model system. Crucially, we find that the bridge formation process is driven by the diffusion of gold atoms along the substrate, however small the gap between the clusters themselves. The complementary simulations of the bridge-breaking process reveal the existence of a threshold bias voltage to activate bridge rupture via Joule heating. These results provide an atomistic-level understanding of the fundamental dynamical processes occurring in neuromorphic cluster arrays. △ Less

Submitted 5 September, 2023; originally announced September 2023.

Journal ref: Nano Research 16 (2023) 10500-10506