-
Observation of spatiotemporal stabilizer in a multi-mode fibre laser
Authors:
Chenxin Gao,
Chengjiu Wang,
Zhenghao Jiao,
Bo Cao,
Xiaosheng Xiao,
Changxi Yang,
Chengying Bao
Abstract:
Spatiotemporal mode-locking (STML) has become an emerging approach to realize organized wavepackets in high-dimensional nonlinear photonic systems. Mode-locking in one dimensional systems employs a saturable absorber to resist fluctuations in the temporal domain. Analogous suppression of fluctuations in the space-time domains to retain a consistent output should also exist for STML. However, exper…
▽ More
Spatiotemporal mode-locking (STML) has become an emerging approach to realize organized wavepackets in high-dimensional nonlinear photonic systems. Mode-locking in one dimensional systems employs a saturable absorber to resist fluctuations in the temporal domain. Analogous suppression of fluctuations in the space-time domains to retain a consistent output should also exist for STML. However, experimental evidence of such a resistance remains elusive, to our knowledge. Here, we report experimental observation of such a spatiotemporal stabilizer in STML, by embedding a spatial light modulator (SLM) into a multi-mode fibre (MMF) laser. Mode decomposition reveals the mode content remains steady for an STML state when applying phase perturbations on the SLM. Conversely, the mode content changes significantly for a non-STML lasing state. Numerical simulations confirm our observation and show that spatial filtering and saturable absorber mainly contribute to the observed stability. The capability to resist the spatial phase fluctuations is observed to depend on the intracavity pulse energy as well as the modal pulse energy condensed in the low-order modes. Our work constitutes another building block for the concept of STML in multi-mode photonic systems.
△ Less
Submitted 2 August, 2024;
originally announced August 2024.
-
Performance of the plastic scintillator modules for the top veto tracker of the Taishan Antineutrino Observatory
Authors:
Guang Luo,
Xiaohao Yin,
Fengpeng An,
Zhimin Wang,
Y. K. Hor,
Peizhi Lu,
Ruhui Li,
Yichen Li,
Wei He,
Wei Wang,
Xiang Xiao
Abstract:
For tracking and tagging the cosmic-ray muon (CR-muon), the Taishan Antineutrino Observatory (TAO) experiment is equipped with a top veto tracker (TVT) system composed of 160 modules, each consisting of plastic scintillator (PS) strip as target material, embedded wavelength shifting fiber (WLS-fiber) as photon collection and transmission medium, and silicon photomultipliers (SiPMs) at both ends as…
▽ More
For tracking and tagging the cosmic-ray muon (CR-muon), the Taishan Antineutrino Observatory (TAO) experiment is equipped with a top veto tracker (TVT) system composed of 160 modules, each consisting of plastic scintillator (PS) strip as target material, embedded wavelength shifting fiber (WLS-fiber) as photon collection and transmission medium, and silicon photomultipliers (SiPMs) at both ends as read-out. This article introduces the unique design of the module and reports the excellent performance of all modules, providing guidance and important reference for the process design of scintillation detectors with WLS-fibers. In general, when the CR-muon hits the center of plastic scintillator and without optical grease, the most probable value of the signal amplitude at one end of the PS strip is greater than 40.8 p.e. and 51.5 p.e. for all the 2 m-length modules and 1.5 m-length modules respectively. The CR-muon tagging efficiency of PS module is measured to be more than 99.3%, which meets the requirement of TAO.
△ Less
Submitted 22 June, 2024;
originally announced June 2024.
-
Non-destructive Degradation Pattern Decoupling for Ultra-early Battery Prototype Verification Using Physics-informed Machine Learning
Authors:
Shengyu Tao,
Mengtian Zhang,
Zixi Zhao,
Haoyang Li,
Ruifei Ma,
Yunhong Che,
Xin Sun,
Lin Su,
Xiangyu Chen,
Zihao Zhou,
Heng Chang,
Tingwei Cao,
Xiao Xiao,
Yaojun Liu,
Wenjun Yu,
Zhongling Xu,
Yang Li,
Han Hao,
Xuan Zhang,
Xiaosong Hu,
Guangmin ZHou
Abstract:
Manufacturing complexities and uncertainties have impeded the transition from material prototypes to commercial batteries, making prototype verification critical to quality assessment. A fundamental challenge involves deciphering intertwined chemical processes to characterize degradation patterns and their quantitative relationship with battery performance. Here we show that a physics-informed mac…
▽ More
Manufacturing complexities and uncertainties have impeded the transition from material prototypes to commercial batteries, making prototype verification critical to quality assessment. A fundamental challenge involves deciphering intertwined chemical processes to characterize degradation patterns and their quantitative relationship with battery performance. Here we show that a physics-informed machine learning approach can quantify and visualize temporally resolved losses concerning thermodynamics and kinetics only using electric signals. Our method enables non-destructive degradation pattern characterization, expediting temperature-adaptable predictions of entire lifetime trajectories, rather than end-of-life points. The verification speed is 25 times faster yet maintaining 95.1% accuracy across temperatures. Such advances facilitate more sustainable management of defective prototypes before massive production, establishing a 19.76 billion USD scrap material recycling market by 2060 in China. By incorporating stepwise charge acceptance as a measure of the initial manufacturing variability of normally identical batteries, we can immediately identify long-term degradation variations. We attribute the predictive power to interpreting machine learning insights using material-agnostic featurization taxonomy for degradation pattern decoupling. Our findings offer new possibilities for dynamic system analysis, such as battery prototype degradation, demonstrating that complex pattern evolutions can be accurately predicted in a non-destructive and data-driven fashion by integrating physics-informed machine learning.
△ Less
Submitted 31 May, 2024;
originally announced June 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Scaling Law Breaking in Unequal-size Droplet Coalescence
Authors:
Xi Xia,
Yicheng Chi,
Peng Zhang
Abstract:
This Letter examines the coalescence of two unequal-size spherical liquid droplets in the inviscid regime. We find that the liquid bridge evolution exhibits a breaking from the classical 1/2 power-law scaling [Phys. Rev. Lett. 95, 164503 (2005)]. Employing an energy balance analysis, we attain a theoretical model to collapse bridge evolution data of different droplet size ratios. This model reveal…
▽ More
This Letter examines the coalescence of two unequal-size spherical liquid droplets in the inviscid regime. We find that the liquid bridge evolution exhibits a breaking from the classical 1/2 power-law scaling [Phys. Rev. Lett. 95, 164503 (2005)]. Employing an energy balance analysis, we attain a theoretical model to collapse bridge evolution data of different droplet size ratios. This model reveals an exponential dependence of the bridge's radial growth on time, which is intrinsically scaling-free owing to the asymmetric movement of the liquid bridge.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
A Strategy Transfer and Decision Support Approach for Epidemic Control in Experience Shortage Scenarios
Authors:
X. Xiao,
P. Chen,
X. Cao,
K. Liu,
L. Deng,
D. Zhao,
Z. Chen,
Q. Deng,
F. Yu,
H. Zhang
Abstract:
Epidemic outbreaks can cause critical health concerns and severe global economic crises. For countries or regions with new infectious disease outbreaks, it is essential to generate preventive strategies by learning lessons from others with similar risk profiles. A Strategy Transfer and Decision Support Approach (STDSA) is proposed based on the profile similarity evaluation. There are four steps in…
▽ More
Epidemic outbreaks can cause critical health concerns and severe global economic crises. For countries or regions with new infectious disease outbreaks, it is essential to generate preventive strategies by learning lessons from others with similar risk profiles. A Strategy Transfer and Decision Support Approach (STDSA) is proposed based on the profile similarity evaluation. There are four steps in this method: (1) The similarity evaluation indicators are determined from three dimensions, i.e., the Basis of National Epidemic Prevention & Control, Social Resilience, and Infection Situation. (2) The data related to the indicators are collected and preprocessed. (3) The first round of screening on the preprocessed dataset is conducted through an improved collaborative filtering algorithm to calculate the preliminary similarity result from the perspective of the infection situation. (4) Finally, the K-Means model is used for the second round of screening to obtain the final similarity values. The approach will be applied to decision-making support in the context of COVID-19. Our results demonstrate that the recommendations generated by the STDSA model are more accurate and aligned better with the actual situation than those produced by pure K-means models. This study will provide new insights into preventing and controlling epidemics in regions that lack experience.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Passive None-line-of-sight imaging with arbitrary scene condition and detection pattern in small amount of prior data
Authors:
Yunting Gui,
Yuegang Fu,
Xueming Xiao,
Meibao Yao
Abstract:
Passive Non-Line-of-Sight (NLOS) imaging requires to reconstruct objects which cannot be seen in line without using external controllable light sources. It can be widely applied in areas like counter-terrorism, urban-Warfare, autonomous-driving and robot-vision. Existing methods for passive NLOS typically required extensive prior information and significant computational resources to establish lig…
▽ More
Passive Non-Line-of-Sight (NLOS) imaging requires to reconstruct objects which cannot be seen in line without using external controllable light sources. It can be widely applied in areas like counter-terrorism, urban-Warfare, autonomous-driving and robot-vision. Existing methods for passive NLOS typically required extensive prior information and significant computational resources to establish light transport matrices or train neural networks. These constraints pose significant challenges for transitioning models to different NLOS scenarios. Thus, the pressing issue in passive NLOS imaging currently lies in whether it is possible to estimate the light transport matrices which corresponding to relay surfaces and scenes, as well as the specific distribution of targets, with a small amount of prior knowledge. In this work, we hypothesized a high-dimensional manifold and mathematically proved its existence. Within this high-dimensional manifold, the structural information of obscured targets is minimally disrupted. Therefore, we proposed a universal framework named High-Dimensional Projection Selection (HDPS) which can establish this high-dimensional manifold and output its projection onto corresponding surfaces on low-dimensional. HDPS can be applied to most mature network architectures and estimate the distribution of target and light spot obtained by camera with only minimal prior data. Certainly, with the help of the estimated information, it can establish a high-dimensional manifold consisting of target and input. As demonstrated in experiment, our framework, even when applied to the most basic network structures, can achieve higher accuracy results with significantly smaller amounts of prior data. Thereby, our approach enables passive NLOS scenarios to reconstruct target by limited prior data and computational resources.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Reconstruction of Poloidal Magnetic Fluxes on EAST based on Neural Networks with Measured Signals
Authors:
Feifei Long,
Xiangze Xia,
Jian Liu,
Zixi Liu,
Xiaodong Wu,
Xiaohe Wu,
Chenguang Wan,
Xiang Gao,
Guoqiang Li,
Zhengping Luo,
Jinping Qian,
EAST Team
Abstract:
The accurate construction of tokamak equilibria, which is critical for the effective control and optimization of plasma configurations, depends on the precise distribution of magnetic fields and magnetic fluxes. Equilibrium fitting codes, such as EFIT relying on traditional equilibrium algorithms, require solving the GS equation by iterations based on the least square method constrained with measu…
▽ More
The accurate construction of tokamak equilibria, which is critical for the effective control and optimization of plasma configurations, depends on the precise distribution of magnetic fields and magnetic fluxes. Equilibrium fitting codes, such as EFIT relying on traditional equilibrium algorithms, require solving the GS equation by iterations based on the least square method constrained with measured magnetic signals. The iterative methods face numerous challenges and complexities in the pursuit of equilibrium optimization. Furthermore, these methodologies heavily depend on the expertise and practical experience, demanding substantial resource allocation in personnel and time. This paper reconstructs magnetic equilibria for the EAST tokamak based on artificial neural networks through a supervised learning method. We use a fully connected neural network to replace the GS equation and reconstruct the poloidal magnetic flux distribution by training the model based on EAST datasets. The training set, validation set, and testing set are partitioned randomly from the dataset of poloidal magnetic flux distributions of the EAST experiments in 2016 and 2017 years. The feasibility of the neural network model is verified by comparing it to the offline EFIT results. It is found that the neural network algorithm based on the supervised machine learning method can accurately predict the location of different closed magnetic flux surfaces at a high efficiency. The similarities of the predicted X-point position and last closed magnetic surface are both 98%. The Pearson coherence of the predicted q profiles is 92%. Compared with the target value, the model results show the potential of the neural network model for practical use in plasma modeling and real-time control of tokamak operations.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Surface lattice resonance lasers with epitaxial InP gain medium
Authors:
Anna Fischer,
Toby Severs Millard,
Xiaofei Xiao,
T. V. Raziman,
Jakub Dranczewski,
Ross C. Schofield,
Heinz Schmid,
Kirsten Moselund,
Riccardo Sapienza,
Rupert Oulton
Abstract:
Surface lattice resonance (SLR) lasers, where gain is supplied by a thin film active material and the feedback comes from multiple scattering by plasmonic nanoparticles, have shown both low threshold lasing and tunability of the angular and spectral emission. However, typically used materials such as organic dyes and QD films suffer from photo-degradation which hampers practical applications. Here…
▽ More
Surface lattice resonance (SLR) lasers, where gain is supplied by a thin film active material and the feedback comes from multiple scattering by plasmonic nanoparticles, have shown both low threshold lasing and tunability of the angular and spectral emission. However, typically used materials such as organic dyes and QD films suffer from photo-degradation which hampers practical applications. Here, we demonstrate photo-stable single-mode lasing of SLR modes sustained in an epitaxial solid-state InP slab waveguide. The nanoparticle array is weakly coupled to the optical modes, which decreases the scattering losses and hence the experimental lasing threshold is as low as 90 $μ$J/cm$^{2}$. The nanoparticle periodicity defines the lasing wavelength and enables tuneable emission wavelengths over a 70 nm spectral range. Combining plasmonic nanoparticles with an epitaxial solid-state gain medium paves the way for large-area on-chip integrated SLR lasers for applications including optical communication, optical computing, sensing, and LiDAR.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
Detecting Neutrinos from Supernova Bursts in PandaX-4T
Authors:
Binyu Pang,
Abdusalam Abdukerim,
Zihao Bo,
Wei Chen,
Xun Chen,
Chen Cheng,
Zhaokan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Chencheng Han,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Junting Huang,
Zhou Huang,
Ruquan Hou
, et al. (71 additional authors not shown)
Abstract:
Neutrinos from core-collapse supernovae are essential for the understanding of neutrino physics and stellar evolution. The dual-phase xenon dark matter detectors can provide a way to track explosions of galactic supernovae by detecting neutrinos through coherent elastic neutrino-nucleus scatterings. In this study, a variation of progenitor masses as well as explosion models are assumed to predict…
▽ More
Neutrinos from core-collapse supernovae are essential for the understanding of neutrino physics and stellar evolution. The dual-phase xenon dark matter detectors can provide a way to track explosions of galactic supernovae by detecting neutrinos through coherent elastic neutrino-nucleus scatterings. In this study, a variation of progenitor masses as well as explosion models are assumed to predict the neutrino fluxes and spectra, which result in the number of expected neutrino events ranging from 6.6 to 13.7 at a distance of 10 kpc over a 10-second duration with negligible backgrounds at PandaX-4T. Two specialized triggering alarms for monitoring supernova burst neutrinos are built. The efficiency of detecting supernova explosions at various distances in the Milky Way is estimated. These alarms will be implemented in the real-time supernova monitoring system at PandaX-4T in the near future, providing the astronomical communities with supernova early warnings.
△ Less
Submitted 10 March, 2024;
originally announced March 2024.
-
Signal Response Model in PandaX-4T
Authors:
Yunyang Luo,
Zihao Bo,
Shibo Zhang,
Abdusalam Abdukerim,
Chen Cheng,
Wei Chen,
Xun Chen,
Yunhua Chen,
Zhaokan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Chencheng Han,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Zhou Huang
, et al. (66 additional authors not shown)
Abstract:
PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of simultaneously collecting the primary scintillation and ionization signals, utilizing their ratio to discriminate dark matter signals from background sources such as ga…
▽ More
PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of simultaneously collecting the primary scintillation and ionization signals, utilizing their ratio to discriminate dark matter signals from background sources such as gamma rays and beta particles. The signal response model plays a crucial role in interpreting the data obtained by PandaX-4T. It describes the conversion from the deposited energy by dark matter interactions to the detectable signals within the detector. The signal response model is utilized in various PandaX-4T results. This work provides a comprehensive description of the procedures involved in constructing and parameter-fitting the signal response model for the energy range of approximately 1 keV to 25 keV for electronic recoils and 6 keV to 90 keV for nuclear recoils. It also covers the signal reconstruction, selection, and correction methods, which are crucial components integrated into the signal response model.
△ Less
Submitted 14 June, 2024; v1 submitted 7 March, 2024;
originally announced March 2024.
-
Mass production and performance study on the 20-inch PMT acrylic protection covers in JUNO
Authors:
Miao He,
Zhonghua Qin,
Diru Wu,
Meihang Xu,
Wan Xie,
Fang Chen,
Xiaoping Jing,
Genhua Yin,
Shengjiong Yin,
Linhua Gu,
Xiaofeng Xia,
Qinchang Wang
Abstract:
The Jiangmen Underground Neutrino Observatory is a neutrino experiment that incorporates 20,012 20-inch photomultiplier tubes (PMTs) and 25,600 3-inch PMTs. A dedicated system was designed to protect the PMTs from an implosion chain reaction underwater. As a crucial element of the protection system, over 20,000 acrylic covers were manufactured through injection molding, ensuring high dimensional p…
▽ More
The Jiangmen Underground Neutrino Observatory is a neutrino experiment that incorporates 20,012 20-inch photomultiplier tubes (PMTs) and 25,600 3-inch PMTs. A dedicated system was designed to protect the PMTs from an implosion chain reaction underwater. As a crucial element of the protection system, over 20,000 acrylic covers were manufactured through injection molding, ensuring high dimensional precision, mechanical strength, and transparency. This paper presents the manufacturing technology, mass production process, and performance characteristics of the acrylic covers.
△ Less
Submitted 25 February, 2024;
originally announced February 2024.
-
Four-Channel WDM Graphene Optical Receiver
Authors:
Laiwen Yu,
Yurui Li,
Hengtai Xiang,
Yuanrong Li,
Hengzhen Cao,
Zhongyang Ji,
Liu Liu,
Xi Xiao,
Jianbo Yin,
Jingshu Guo,
Daoxin Dai
Abstract:
Silicon photonics with the advantages of low power consumption, low cost, and high yield is a crucial technology for facilitating high-capacity optical communications and interconnects. The graphene photodetectors (GPDs) featuring broadband operation, high speed, and low integration cost can be good additions to the conventional SiGe photodetectors, supporting silicon-integrated on-chip photodetec…
▽ More
Silicon photonics with the advantages of low power consumption, low cost, and high yield is a crucial technology for facilitating high-capacity optical communications and interconnects. The graphene photodetectors (GPDs) featuring broadband operation, high speed, and low integration cost can be good additions to the conventional SiGe photodetectors, supporting silicon-integrated on-chip photodetection in new wavelength bands beyond 1.6 microns (e.g., U-band and 2 microns). Here we realize a silicon-integrated four-channel wavelength division multiplexing (WDM) optical receiver based on a micro-ring resonator (MRR) array and four p-n homojunction GPDs. These GPDs based on the photo-thermoelectric (PTE) effect operating under zero (current) bias exhibit responsivities of about 1.1 V/W and flat frequency responses up to 67 GHz which is set-up limited. The GPDs show good consistence benefiting from the compact active region array (0.006 mm^2) covered by a single mechanically exfoliated hBN/graphene/hBN stack. Moreover, the WDM graphene optical receiver realized the 4 x 16 Gbps non-return to zero (NRZ) optical signal transmission. To the best of our knowledge, it is the first GPD-array-based optical receiver using high-quality mechanically exfoliated graphene and edge graphene-metal conduct with low resistance. Apparently, our design is also compatible with CVD-grown graphene, which can also result in a good consistence of the GPDs. This work shed light on the large-scale integration of GPDs with high consistency and uniformity, enabling the application of high-quality mechanically exfoliated graphene, and promoting the development of the graphene photonic integrated circuits.
△ Less
Submitted 2 March, 2024; v1 submitted 25 February, 2024;
originally announced February 2024.
-
Performance studies of a SiPM-readout system with a pico-second timing chip
Authors:
Xin Xia,
Dejing Du,
Xiaoshan Jiang,
Yong Liu,
Bo Lu,
Junguang Lyu,
Baohua Qi,
Manqi Ruan,
Xiongbo Yan
Abstract:
A pico-second timing (PIST) front-end electronic chip has been developed using $55~\mathrm{nm}$ CMOS technology for future electron-positron collider experiments (namely Higgs factories). Extensive tests have been performed to evaluate the timing performance of a dedicated SiPM-readout system equipped with a PIST chip. The results show that the system timing resolution can achieve…
▽ More
A pico-second timing (PIST) front-end electronic chip has been developed using $55~\mathrm{nm}$ CMOS technology for future electron-positron collider experiments (namely Higgs factories). Extensive tests have been performed to evaluate the timing performance of a dedicated SiPM-readout system equipped with a PIST chip. The results show that the system timing resolution can achieve $45~\mathrm{ps}$ for SiPM signals at the minimum-ionizing particles (MIP) level ($200~\mathrm{p.e.}$) and better than $ 10~\mathrm{ps}$ for signals larger than $1200~\mathrm{p.e.}$, while the PIST intrinsic timing resolution is $4.76 \pm 0.60~\mathrm{ps}$. The PIST dynamic range has been further extended using the time-over-threshold (ToT) technique, which can cover the SiPM response spanning from $\mathrm{\sim 900~p.e.}$ to $~\mathrm{\sim 40000~p.e.}$.
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
Improvement on the Linearity Response of PandaX-4T with new Photomultiplier Tubes Bases
Authors:
Lingyin Luo,
Deqing Fang,
Ke Han,
Di Huang,
Xiaofeng Shang,
Anqing Wang,
Qiuhong Wang,
Shaobo Wang,
Siguang Wang,
Xiang Xiao,
Binbin Yan,
Xiyu Yan
Abstract:
With the expanding reach of physics, xenon-based detectors such as PandaX-4T in the China Jinping Underground Laboratory aim to cover an energy range from sub-keV to multi-MeV. A linear response of the photomultiplier tubes (PMTs) is required for both scintillation and electroluminescence signals. Through a dedicated bench test, we investigated the cause of the non-linear response in the Hamamatsu…
▽ More
With the expanding reach of physics, xenon-based detectors such as PandaX-4T in the China Jinping Underground Laboratory aim to cover an energy range from sub-keV to multi-MeV. A linear response of the photomultiplier tubes (PMTs) is required for both scintillation and electroluminescence signals. Through a dedicated bench test, we investigated the cause of the non-linear response in the Hamamatsu R11410-23 PMTs used in PandaX-4T. The saturation and suppression of the PMT waveform observed during the commissioning of PandaX-4T were caused by the high-voltage divider base. The bench test data validated the de-saturation algorithm used in the PandaX-4T data analysis. We also confirmed the improvement in linearity of a new PMT base design, which will be used to upgrade the PMT readout system in PandaX-4T.
△ Less
Submitted 7 April, 2024; v1 submitted 30 December, 2023;
originally announced January 2024.
-
Waveform Simulation in PandaX-4T
Authors:
Jiafu Li,
Abdusalam Abdukerim,
Chen Cheng,
Zihao Bo,
Wei Chen,
Xun Chen,
Yunhua Chen,
Zhaokan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Chencheng Han,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Zhou Huang,
Ruquan Hou
, et al. (66 additional authors not shown)
Abstract:
Signal reconstruction through software processing is a crucial component of the background and signal models in the PandaX-4T experiment, which is a multi-tonne dark matter direct search experiment. The accuracy of signal reconstruction is influenced by various detector artifacts, including noise, dark count of photomultiplier, impurity photoionization in the detector, and other relevant considera…
▽ More
Signal reconstruction through software processing is a crucial component of the background and signal models in the PandaX-4T experiment, which is a multi-tonne dark matter direct search experiment. The accuracy of signal reconstruction is influenced by various detector artifacts, including noise, dark count of photomultiplier, impurity photoionization in the detector, and other relevant considerations. In this study, we present a detailed description of a semi-data-driven approach designed to simulate the signal waveform. This work provides a reliable model for the efficiency and bias of the signal reconstruction in the data analysis of PandaX-4T. By comparing critical variables which relate to the temporal shape and hit pattern of the signals, we demonstrate a good agreement between the simulation and data.
△ Less
Submitted 21 May, 2024; v1 submitted 18 December, 2023;
originally announced December 2023.
-
Quantum squeezing induced nonreciprocal phonon laser
Authors:
Tian-Xiang Lu,
Yan Wang,
Keyu Xia,
Xing Xiao,
Le-Man Kuang,
Hui Jing
Abstract:
Phonon lasers or coherent amplifications of mechanical oscillations have provided powerful tools for both fundamental studies of coherent acoustics and diverse applications ranging from ultrasensitive force sensing to phononic information processing. Here, we propose how to achieve directional phonon lasing with an optomechanical resonator coupled to a nonlinear optical resonator. We find that, by…
▽ More
Phonon lasers or coherent amplifications of mechanical oscillations have provided powerful tools for both fundamental studies of coherent acoustics and diverse applications ranging from ultrasensitive force sensing to phononic information processing. Here, we propose how to achieve directional phonon lasing with an optomechanical resonator coupled to a nonlinear optical resonator. We find that, by pumping the nonlinear resonator, directional optical squeezing can occur along the pump direction. As a result, we can achieve the directional mechanical gain by utilizing the directional optical squeezing, thus leading to nonreciprocal phonon lasing with a well-tunable directional power threshold. Our work shows a feasible way to build nonreciprocal phonon lasers with various nonlinear optical mediums, which are important for such a wide range of applications as directional acoustic amplifiers, invisible sound sensing or imaging, and one-way phononic networks.
△ Less
Submitted 11 December, 2023;
originally announced December 2023.
-
Long-term temporal stability of the DarkSide-50 dark matter detector
Authors:
The DarkSide-50 Collaboration,
:,
P. Agnes,
I. F. M. Albuquerque,
T. Alexander,
A. K. Alton,
M. Ave,
H. O. Back,
G. Batignani,
K. Biery,
V. Bocci,
W. M. Bonivento,
B. Bottino,
S. Bussino,
M. Cadeddu,
M. Cadoni,
F. Calaprice,
A. Caminata,
M. D. Campos,
N. Canci,
M. Caravati,
N. Cargioli,
M. Cariello,
M. Carlini,
V. Cataudella
, et al. (121 additional authors not shown)
Abstract:
The stability of a dark matter detector on the timescale of a few years is a key requirement due to the large exposure needed to achieve a competitive sensitivity. It is especially crucial to enable the detector to potentially detect any annual event rate modulation, an expected dark matter signature. In this work, we present the performance history of the DarkSide-50 dual-phase argon time project…
▽ More
The stability of a dark matter detector on the timescale of a few years is a key requirement due to the large exposure needed to achieve a competitive sensitivity. It is especially crucial to enable the detector to potentially detect any annual event rate modulation, an expected dark matter signature. In this work, we present the performance history of the DarkSide-50 dual-phase argon time projection chamber over its almost three-year low-radioactivity argon run. In particular, we focus on the electroluminescence signal that enables sensitivity to sub-keV energy depositions. The stability of the electroluminescence yield is found to be better than 0.5%. Finally, we show the temporal evolution of the observed event rate around the sub-keV region being consistent to the background prediction.
△ Less
Submitted 22 May, 2024; v1 submitted 30 November, 2023;
originally announced November 2023.
-
Principal modes of multimode fibers resisting fiber bending
Authors:
Jiawei Xu,
Xiaosheng Xiao
Abstract:
Multimode fibers (MMFs) have found wide application across various fields, such as optical communications, mode-locked lasers, and endoscopy. However, the practical use of MMFs is limited by the challenges posed by fiber bending, which leads to mode coupling. In this study, we present evidence that MMFs possess principal modes, named curved principal modes, that can resist significant bending. The…
▽ More
Multimode fibers (MMFs) have found wide application across various fields, such as optical communications, mode-locked lasers, and endoscopy. However, the practical use of MMFs is limited by the challenges posed by fiber bending, which leads to mode coupling. In this study, we present evidence that MMFs possess principal modes, named curved principal modes, that can resist significant bending. These curved principal modes are identified by extending the Wigner-Smith operator to curved MMFs, and are demonstrated for arbitrary bending by numerical simulations. These findings have substantial implications for mode-divide-multiplexed optical fiber communications, MMF-based endoscopy, and other related applications.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
A high-Q metasurface signal isolator for 1.5T surface coil magnetic resonance imaging on the go
Authors:
Qun Ren,
Yuxin Lang,
Yuqi Ja,
Xia Xiao,
Yu Liu,
Xiangzheng Kong,
Ruiqi Jin,
Yongqing He,
Jianwei You,
Wei Sha,
Yanwei Pang
Abstract:
The combination of surface coils and metamaterials remarkably enhance magnetic resonance imaging (MRI) performance for significant local staging flexibility. However, due to the coupling in between, impeded signal-to-noise ratio (SNR) and low-contrast resolution, further hamper the future growth in clinical MRI. In this paper, we propose a high-Q metasurface decoupling isolator fueled by topologic…
▽ More
The combination of surface coils and metamaterials remarkably enhance magnetic resonance imaging (MRI) performance for significant local staging flexibility. However, due to the coupling in between, impeded signal-to-noise ratio (SNR) and low-contrast resolution, further hamper the future growth in clinical MRI. In this paper, we propose a high-Q metasurface decoupling isolator fueled by topological LC loops for 1.5T surface coil MRI system, increasing the magnetic field up to fivefold at 63.8 MHz. We have employed a polarization conversion mechanism to effectively eliminate the coupling between the MRI metamaterial and the radio frequency (RF) surface transmitter-receiver coils. Furthermore, a high-Q metasurface isolator was achieved by taking advantage of bound states in the continuum (BIC) for extremely high-field MRI and spectroscopy. An equivalent physical model of the miniaturized metasurface design was put forward through LC circuit analysis. This study opens up a promising route for the easy-to-use and portable surface coil MRI scanners.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Designing superselectivity in linker-mediated multivalent nanoparticle adsorption
Authors:
Xiuyang Xia,
Ran Ni
Abstract:
Using a statistical mechanical model and numerical simulations, we provide the design principle for the bridging strength ($ξ$) and linker density ($ρ$) dependent superselectivity in linker-mediated multivalent nanoparticle adsorption. When the bridges are insufficient, the formation of multiple bridges leads to both $ξ$- and $ρ$-dependent superselectivity. Whereas, when the bridges are excessive,…
▽ More
Using a statistical mechanical model and numerical simulations, we provide the design principle for the bridging strength ($ξ$) and linker density ($ρ$) dependent superselectivity in linker-mediated multivalent nanoparticle adsorption. When the bridges are insufficient, the formation of multiple bridges leads to both $ξ$- and $ρ$-dependent superselectivity. Whereas, when the bridges are excessive, the system becomes insensitive to bridging strength due to entropy-induced self-saturation and shows a superselective desorption with respect to the linker density. Counterintuitively, lower linker density or stronger bridging strength enhances the superselectivity. These findings enhance understanding of relevant biological processes and open up opportunities for applications in biosensing, drug delivery, and programmable self-assembly.
△ Less
Submitted 22 February, 2024; v1 submitted 24 October, 2023;
originally announced October 2023.
-
3D-Printed Micro Ion Trap Technology for Scalable Quantum Information Processing
Authors:
Shuqi Xu,
Xiaoxing Xia,
Qian Yu,
Sumanta Khan,
Eli Megidish,
Bingran You,
Boerge Hemmerling,
Andrew Jayich,
Juergen Biener,
Hartmut Häffner
Abstract:
Trapped-ion applications, such as in quantum information, precision measurements, optical clocks, and mass spectrometry, rely on specialized high-performance ion traps. The latter applications typically employ traditional machining to customize macroscopic 3D Paul traps, while quantum information processing experiments usually rely on photo-lithographic techniques to miniaturize the traps and meet…
▽ More
Trapped-ion applications, such as in quantum information, precision measurements, optical clocks, and mass spectrometry, rely on specialized high-performance ion traps. The latter applications typically employ traditional machining to customize macroscopic 3D Paul traps, while quantum information processing experiments usually rely on photo-lithographic techniques to miniaturize the traps and meet scalability requirements. Using photolithography, however, it is challenging to fabricate the complex three-dimensional electrode structures required for optimal confinement. Here we address these limitations by adopting a high-resolution 3D printing technology based on two-photon polymerization supporting fabrication of large arrays of high-performance miniaturized 3D traps. We show that 3D-printed ion traps combine the advantages of traditionally machined 3D traps with the miniaturization provided by photolithography by confining single calcium ions in a small 3D-printed ion trap with radial trap frequencies ranging from 2 MHz to 24 MHz. The tight confinement eases ion cooling requirements and allows us to demonstrate high-fidelity coherent operations on an optical qubit after only Doppler cooling. With 3D printing technology, the design freedom is drastically expanded without sacrificing scalability and precision so that ion trap geometries can be optimized for higher performance and better functionality.
△ Less
Submitted 5 October, 2023; v1 submitted 1 October, 2023;
originally announced October 2023.
-
Comparisons among the Performances of Randomized-framed Benchmarking Protocols under T1, T2 and Coherent Error Models
Authors:
Xudan Chai,
Yanwu Gu,
Weifeng Zhuang,
Peng Qian,
Xiao Xiao,
Dong E Liu
Abstract:
While fundamental scientific researchers are eagerly anticipating the breakthroughs of quantum computing both in theory and technology, the current quantum computer, i.e. noisy intermediate-scale quantum (NISQ) computer encounters a bottleneck in how to deal with the noisy situation of the quantum machine. It is still urgently required to construct more efficient and reliable benchmarking protocol…
▽ More
While fundamental scientific researchers are eagerly anticipating the breakthroughs of quantum computing both in theory and technology, the current quantum computer, i.e. noisy intermediate-scale quantum (NISQ) computer encounters a bottleneck in how to deal with the noisy situation of the quantum machine. It is still urgently required to construct more efficient and reliable benchmarking protocols through which one can assess the noise level of a quantum circuit that is designed for a quantum computing task. The existing methods that are mainly constructed based on a sequence of random circuits, such as randomized benchmarking (RB), have been commonly adopted as the conventional approach owning to its reasonable resource consumption and relatively acceptable reliability, compared with the average gate fidelity. To more deeply understand the performances of the above different randomized-framed benchmarking protocols, we design special random circuit sequences to test the performances of the three selected standard randomized-frame protocols under T1, T2, and coherent errors, which are regarded to be more practical for a superconductor quantum computer. The simulations indicate that MRB, DRB, and CRB sequentially overestimate the average error rate in the presence of T1 and T2 noise, compared with the conventional circuit's average error. Moreover, these methods exhibit almost the same level of sensitivity to the coherent error. Furthermore, the DRB loses its reliability when the strengths of T1 grow. More practically, the simulated conclusion is verified by running the designed tasks for three protocols on the Quafu quantum computation cloud platform. We find that MRB produces a more precise assessment of a quantum circuit conditioned on limited resources. However, the DRB provides a more stable estimation at a specific precision while a more resource-consuming.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Human Learning of Hierarchical Graphs
Authors:
Xiaohuan Xia,
Andrei A. Klishin,
Jennifer Stiso,
Christopher W. Lynn,
Ari E. Kahn,
Lorenzo Caciagli,
Dani S. Bassett
Abstract:
Humans are constantly exposed to sequences of events in the environment. Those sequences frequently evince statistical regularities, such as the probabilities with which one event transitions to another. Collectively, inter-event transition probabilities can be modeled as a graph or network. Many real-world networks are organized hierarchically and understanding how humans learn these networks is…
▽ More
Humans are constantly exposed to sequences of events in the environment. Those sequences frequently evince statistical regularities, such as the probabilities with which one event transitions to another. Collectively, inter-event transition probabilities can be modeled as a graph or network. Many real-world networks are organized hierarchically and understanding how humans learn these networks is an ongoing aim of current investigations. While much is known about how humans learn basic transition graph topology, whether and to what degree humans can learn hierarchical structures in such graphs remains unknown. We investigate how humans learn hierarchical graphs of the Sierpiński family using computer simulations and behavioral laboratory experiments. We probe the mental estimates of transition probabilities via the surprisal effect: a phenomenon in which humans react more slowly to less expected transitions, such as those between communities or modules in the network. Using mean-field predictions and numerical simulations, we show that surprisal effects are stronger for finer-level than coarser-level hierarchical transitions. Surprisal effects at coarser levels of the hierarchy are difficult to detect for limited learning times or in small samples. Using a serial response experiment with human participants (n=$100$), we replicate our predictions by detecting a surprisal effect at the finer-level of the hierarchy but not at the coarser-level of the hierarchy. To further explain our findings, we evaluate the presence of a trade-off in learning, whereby humans who learned the finer-level of the hierarchy better tended to learn the coarser-level worse, and vice versa. Our study elucidates the processes by which humans learn hierarchical sequential events. Our work charts a road map for future investigation of the neural underpinnings and behavioral manifestations of graph learning.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
Controllable Weyl nodes and Fermi arcs in a light-irradiated carbon allotrope
Authors:
Ruoning Ji,
Xianyong Ding,
Fangyang Zhan,
Xiaoliang Xiao,
Jing Fan,
Zhen Ning,
Rui Wang
Abstract:
The precise control of Weyl physics in realistic materials oers a promising avenue to construct accessible topological quantum systems, and thus draw widespread attention in condensed-matter physics. Here, based on rst-principles calculations, maximally localized Wannier functions based tight-binding model, and Floquet theorem, we study the light-manipulated evolution of Weyl physics in a carbon a…
▽ More
The precise control of Weyl physics in realistic materials oers a promising avenue to construct accessible topological quantum systems, and thus draw widespread attention in condensed-matter physics. Here, based on rst-principles calculations, maximally localized Wannier functions based tight-binding model, and Floquet theorem, we study the light-manipulated evolution of Weyl physics in a carbon allotrope C6 crystallizing a face-centered orthogonal structure (fco-C6), an ideal Weyl semimetal with two pairs of Weyl nodes, under the irradiation of a linearly polarized light (LPL). We show that the positions of Weyl nodes and Fermi arcs can be accurately controlled by changing light intensity. Moreover, we employ a low-energy eective k p model to understand light-controllable Weyl physics. The results indicate that the symmetry of light-irradiated fco-C6 can be selectively preserved, which guarantees that the light-manipulated Weyl nodes can only move in the highsymmetry plane in momentum space. Our work not only demonstrates the ecacy of employing periodic driving light elds as an ecient approach to manipulate Weyl physics, but also paves a reliable pathway for designing accessible topological states under light irradiation.
△ Less
Submitted 21 August, 2023;
originally announced August 2023.
-
Exploring the Potential of Integrated Optical Sensing and Communication (IOSAC) Systems with Si Waveguides for Future Networks
Authors:
Xiangpeng Ou,
Ying Qiu,
Ming Luo,
Fujun Sun,
Peng Zhang,
Gang Yang,
Junjie Li,
Jianfeng Gao,
Xiaobin He,
Anyan Du,
Bo Tang,
Bin Li,
Zichen Liu,
Zhihua Li,
Ling Xie,
Xi Xiao,
Jun Luo,
Wenwu Wang,
Jin Tao,
Yan Yang
Abstract:
Advanced silicon photonic technologies enable integrated optical sensing and communication (IOSAC) in real time for the emerging application requirements of simultaneous sensing and communication for next-generation networks. Here, we propose and demonstrate the IOSAC system on the silicon nitride (SiN) photonics platform. The IOSAC devices based on microring resonators are capable of monitoring t…
▽ More
Advanced silicon photonic technologies enable integrated optical sensing and communication (IOSAC) in real time for the emerging application requirements of simultaneous sensing and communication for next-generation networks. Here, we propose and demonstrate the IOSAC system on the silicon nitride (SiN) photonics platform. The IOSAC devices based on microring resonators are capable of monitoring the variation of analytes, transmitting the information to the terminal along with the modulated optical signal in real-time, and replacing bulk optics in high-precision and high-speed applications. By directly integrating SiN ring resonators with optical communication networks, simultaneous sensing and optical communication are demonstrated by an optical signal transmission experimental system using especially filtering amplified spontaneous emission spectra. The refractive index (RI) sensing ring with a sensitivity of 172 nm/RIU, a figure of merit (FOM) of 1220, and a detection limit (DL) of 8.2*10-6 RIU is demonstrated. Simultaneously, the 1.25 Gbps optical on-off-keying (OOK) signal is transmitted at the concentration of different NaCl solutions, which indicates the bit-error-ratio (BER) decreases with the increase in concentration. The novel IOSAC technology shows the potential to realize high-performance simultaneous biosensing and communication in real time and further accelerate the development of IoT and 6G networks.
△ Less
Submitted 27 June, 2023;
originally announced July 2023.
-
Physics-Constrained Hardware-Efficient Ansatz on Quantum Computers that is Universal, Systematically Improvable, and Size-consistent
Authors:
Xiaoxiao Xiao,
Hewang Zhao,
Jiajun Ren,
Wei-hai Fang,
Zhendong Li
Abstract:
Variational wavefunction ansätze are at the heart of solving quantum many-body problems in physics and chemistry. Previous designs of hardware-efficient ansatz (HEA) on quantum computers are largely based on heuristics and lack rigorous theoretical foundations. In this work, we introduce a physics-constrained approach for designing HEA with rigorous theoretical guarantees by imposing a few fundame…
▽ More
Variational wavefunction ansätze are at the heart of solving quantum many-body problems in physics and chemistry. Previous designs of hardware-efficient ansatz (HEA) on quantum computers are largely based on heuristics and lack rigorous theoretical foundations. In this work, we introduce a physics-constrained approach for designing HEA with rigorous theoretical guarantees by imposing a few fundamental constraints. Specifically, we require that the target HEA to be universal, systematically improvable, and size-consistent, which is an important concept in quantum many-body theories for scalability, but has been overlooked in previous designs of HEA. We extend the notion of size-consistency to HEA, and present a concrete realization of HEA that satisfies all these fundamental constraints while only requiring linear qubit connectivity. The developed physics-constrained HEA is superior to other heuristically designed HEA in terms of both accuracy and scalability, as demonstrated numerically for the Heisenberg model and some typical molecules. In particular, we find that restoring size-consistency can significantly reduce the number of layers needed to reach certain accuracy. In contrast, the failure of other HEA to satisfy these constraints severely limits their scalability to larger systems with more than ten qubits. Our work highlights the importance of incorporating physical constraints into the design of HEA for efficiently solving many-body problems on quantum computers.
△ Less
Submitted 21 December, 2023; v1 submitted 7 July, 2023;
originally announced July 2023.
-
Mega-cities dominate China's urban greening
Authors:
Xiaoxin Zhang,
Martin Brandt,
Xiaoye Tong,
Xiaowei Tong,
Wenmin Zhang,
Florian Reiner,
Sizhuo Li,
Feng Tian,
Yuemin Yue,
Weiqi Zhou,
Bin Chen,
Xiangming Xiao,
Rasmus Fensholt
Abstract:
Trees play a crucial role in urban environments, offering various ecosystem services that contribute to public health and human well-being. China has initiated a range of urban greening policies over the past decades, however, monitoring their impact on urban tree dynamics at a national scale has proven challenging. In this study, we deployed nano-satellites to quantify urban tree coverage in all…
▽ More
Trees play a crucial role in urban environments, offering various ecosystem services that contribute to public health and human well-being. China has initiated a range of urban greening policies over the past decades, however, monitoring their impact on urban tree dynamics at a national scale has proven challenging. In this study, we deployed nano-satellites to quantify urban tree coverage in all major Chinese cities larger than 50 km2 in 2010 and 2019. Our findings indicate that approximately 6000 km2 (11%) of urban areas were covered by trees in 2019, and 76% of these cities experienced an increase in tree cover compared to 2010. Notably, the increase in tree cover in mega-cities such as Beijing, and Shanghai was approximately twice as large as in most other cities (7.69% vs 3.94%). The study employs a data-driven approach towards assessing urban tree cover changes in relation to greening policies, showing clear signs of tree cover increases but also suggesting an uneven implementation primarily benefiting a few mega-cities.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
Experts' cognition-driven ensemble deep learning for external validation of predicting pathological complete response to neoadjuvant chemotherapy from histological images in breast cancer
Authors:
Yongquan Yang,
Fengling Li,
Yani Wei,
Yuanyuan Zhao,
Jing Fu,
Xiuli Xiao,
Hong Bu
Abstract:
In breast cancer imaging, there has been a trend to directly predict pathological complete response (pCR) to neoadjuvant chemotherapy (NAC) from histological images based on deep learning (DL). However, it has been a commonly known problem that the constructed DL-based models numerically have better performances in internal validation than in external validation. The primary reason for this situat…
▽ More
In breast cancer imaging, there has been a trend to directly predict pathological complete response (pCR) to neoadjuvant chemotherapy (NAC) from histological images based on deep learning (DL). However, it has been a commonly known problem that the constructed DL-based models numerically have better performances in internal validation than in external validation. The primary reason for this situation lies in that the distribution of the external data for validation is different from the distribution of the training data for the construction of the predictive model. In this paper, we aim to alleviate this situation with a more intrinsic approach. We propose an experts' cognition-driven ensemble deep learning (ECDEDL) approach for external validation of predicting pCR to NAC from histological images in breast cancer. The proposed ECDEDL, which takes the cognition of both pathology and artificial intelligence experts into consideration to improve the generalization of the predictive model to the external validation, more intrinsically approximates the working paradigm of a human being which will refer to his various working experiences to make decisions. The proposed ECDEDL approach was validated with 695 WSIs collected from the same center as the primary dataset to develop the predictive model and perform the internal validation, and 340 WSIs collected from other three centers as the external dataset to perform the external validation. In external validation, the proposed ECDEDL approach improves the AUCs of pCR prediction from 61.52(59.80-63.26) to 67.75(66.74-68.80) and the Accuracies of pCR prediction from 56.09(49.39-62.79) to 71.01(69.44-72.58). The proposed ECDEDL was quite effective for external validation, numerically more approximating the internal validation.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
The New Small Wheel electronics
Authors:
G. Iakovidis,
L. Levinson,
Y. Afik,
C. Alexa,
T. Alexopoulos,
J. Ameel,
D. Amidei,
D. Antrim,
A. Badea,
C. Bakalis,
H. Boterenbrood,
R. S. Brener,
S. Chan,
J. Chapman,
G. Chatzianastasiou,
H. Chen,
M. C. Chu,
R. M. Coliban,
T. Costa de Paiva,
G. de Geronimo,
R. Edgar,
N. Felt,
S. Francescato,
M. Franklin,
T. Geralis
, et al. (77 additional authors not shown)
Abstract:
The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector te…
▽ More
The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector technologies, the resistive strip Micromegas detectors and the "small" Thin Gap Chambers, with a total of 2.45 Million electrodes to be sensed. The two technologies require the design of a complex electronics system given that it consists of two different detector technologies and is required to provide both precision readout and a fast trigger. It will operate in a high background radiation region up to about 20 kHz/cm$^{2}$ at the expected HL-LHC luminosity of $\mathcal{L}$=7.5$\times10^{34}$cm$^{-2}$s$^{-1}$. The architecture of the system is strongly defined by the GBTx data aggregation ASIC, the newly-introduced FELIX data router and the software based data handler of the ATLAS detector. The electronics complex of this new detector was designed and developed in the last ten years and consists of multiple radiation tolerant Application Specific Integrated Circuits, multiple front-end boards, dense boards with FPGA's and purpose-built Trigger Processor boards within the ATCA standard. The New Small Wheel has been installed in 2021 and is undergoing integration within ATLAS for LHC Run 3. It should operate through the end of Run 4 (December 2032). In this manuscript, the overall design of the New Small Wheel electronics is presented.
△ Less
Submitted 25 May, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
The JUNO experiment Top Tracker
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato
, et al. (592 additional authors not shown)
Abstract:
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector…
▽ More
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.
-
JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Marco Beretta
, et al. (592 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Design optimization of JUNO-TAO plastic scintillator with WLS-fiber and SiPM readout
Authors:
Guang Luo,
Y. K. Hor,
Peizhi Lu,
Zhimin Wang,
Ruhui Li,
Min Li,
Yichen Li,
Liang Zhan,
Wei Wang,
Yuehuan Wei,
Yu Chen,
Xiang Xiao,
Fengpeng An
Abstract:
Plastic scintillators (PSs)embedded with wavelength-shifting fibers are widely used in high-energy particle physics, such as in muon taggers,as well as in medical physics and other applications. In this study,a simulation package was built to evaluate the effects of the diameter and layout of optical fibers on the light yield with different configurations. The optimal optical configuration was des…
▽ More
Plastic scintillators (PSs)embedded with wavelength-shifting fibers are widely used in high-energy particle physics, such as in muon taggers,as well as in medical physics and other applications. In this study,a simulation package was built to evaluate the effects of the diameter and layout of optical fibers on the light yield with different configurations. The optimal optical configuration was designed based on simulations and validated using two PS prototypes under certain experimental conditions. Atop veto tracker (TVT) for the JUNO-TAO experiment, comprising four layers of 160 strips of PS, was designed and evaluated. The threshold was evaluated when the muon tagging efficiency of a PS strip was >99%. The efficiency of three layer out of four layer of TVT is >99%,even with a tagging efficiency of a single strip as low as 97%, using a threshold of 10 photoelectrons and assuming a 40%silicon PM photon detection efficiency.
△ Less
Submitted 19 July, 2023; v1 submitted 24 February, 2023;
originally announced February 2023.
-
A driven quantum superconducting circuit with multiple tunable degeneracies
Authors:
Jayameenakshi Venkatraman,
Rodrigo G. Cortinas,
Nicholas E. Frattini,
Xu Xiao,
Michel H. Devoret
Abstract:
We present the experimental discovery of multiple simultaneous degeneracies in the spectrum of a Kerr oscillator subjected to a squeezing drive. This squeezing, in combination with the Kerr interaction creates an effective static two-well potential in the frame rotating at half the frequency of the sinusoidal driving force. Remarkably, these degeneracies can be turned on-and-off on demand, and the…
▽ More
We present the experimental discovery of multiple simultaneous degeneracies in the spectrum of a Kerr oscillator subjected to a squeezing drive. This squeezing, in combination with the Kerr interaction creates an effective static two-well potential in the frame rotating at half the frequency of the sinusoidal driving force. Remarkably, these degeneracies can be turned on-and-off on demand, and their number is tunable. We find that when the detuning $Δ$ between the frequency of the oscillator and characteristic frequency of the drive equals an even multiple of the Kerr coefficient $K$, $Δ/K = 2m$, the oscillator displays $m + 1$ exact, parity-protected, spectral degeneracies, insensitive to the drive amplitude. The degeneracies stem from the unusual destructive interference of tunnel paths in the classically forbidden region of the double well static effective potential that models our experiment. Exploiting this interference, we measure a peaked enhancement of the incoherent well-switching lifetime creating a super-protected cat qubit in the ground state manifold of our oscillator. {Our results demonstrate the relationship between degeneracies and noise protection in quantum systems.
△ Less
Submitted 10 May, 2023; v1 submitted 8 November, 2022;
originally announced November 2022.
-
Central recirculation zone in a V-shaped premixed swirling flame
Authors:
Qiuxiao Wang,
Yongzhi Ren,
Mingming Gu,
Bowen Yu,
Xiaoxing Feng,
Fei Qi,
Xi Xia
Abstract:
This paper presents an experimental study on the emergence of the central recirculation zone (CRZ) in a V-shaped premixed swirling flame, using simultaneous measurement of particle image velocimetry (PIV) and CH* chemiluminescence. The results show that either increasing the Reynolds number (Re) or decreasing the equivalence ratio (Φ) would facilitate the emergence of CRZ. Further analysis demonst…
▽ More
This paper presents an experimental study on the emergence of the central recirculation zone (CRZ) in a V-shaped premixed swirling flame, using simultaneous measurement of particle image velocimetry (PIV) and CH* chemiluminescence. The results show that either increasing the Reynolds number (Re) or decreasing the equivalence ratio (Φ) would facilitate the emergence of CRZ. Further analysis demonstrates that the CRZ characteristics and its emergence are strongly influenced by the inner shear layer (ISL) surrounding the CRZ, while the swirl intensity remains unchanged. Dimensional analysis is performed to understand the underlying mechanism, suggesting the CRZ emergence is controlled by a non-dimensional parameter, Re_s=|γ|_max D/ν_s, defined based on the maximum ISL intensity (|γ|_max), the exit diameter (D), and the kinematic viscosity (ν_s) of the burnt gas. By estimating the temperature and viscosity with a simple heat-loss model, we show in the |γ|_max D-ν_s regime diagram that the cases with and without CRZ are separated by a single boundary line, corresponding to a critical Re_s of about 424. This verifies the applicability of the proposed Re_s criterion to lean-premixed V-shaped swirling flames under various conditions. Unlike most previous works that attribute the CRZ of swirling flames to vortex breakdown, the present work reveals the non-negligible effect of the ISL, especially the CRZ suppression when the ISL is weakened by flame heating.
△ Less
Submitted 4 April, 2023; v1 submitted 9 October, 2022;
originally announced October 2022.
-
On the static effective Lindbladian of the squeezed Kerr oscillator
Authors:
Jayameenakshi Venkatraman,
Xu Xiao,
Rodrigo G. Cortiñas,
Michel H. Devoret
Abstract:
We derive the static effective Lindbladian beyond the rotating wave approximation (RWA) for a driven nonlinear oscillator coupled to a bath of harmonic oscillators. The associated dissipative effects may explain orders of magnitude differences between the predictions of the ordinary RWA model and results from recent superconducting circuits experiments on the Kerr-cat qubit. The higher-order dissi…
▽ More
We derive the static effective Lindbladian beyond the rotating wave approximation (RWA) for a driven nonlinear oscillator coupled to a bath of harmonic oscillators. The associated dissipative effects may explain orders of magnitude differences between the predictions of the ordinary RWA model and results from recent superconducting circuits experiments on the Kerr-cat qubit. The higher-order dissipators found in our calculations have important consequences for quantum error-correction protocols and parametric processses.
△ Less
Submitted 23 September, 2022; v1 submitted 22 September, 2022;
originally announced September 2022.
-
Observation of the Surface Layer of Lithium Metal using In Situ Spectroscopy
Authors:
Ambrose Seo,
Andrew Meyer,
Sujan Shrestha,
Ming Wang,
Xingcheng Xiao,
Yang-Tse Cheng
Abstract:
We have investigated the surface of lithium metal using x-ray photoemission spectroscopy and optical spectroscopic ellipsometry. Even if we prepare the surface of lithium metal rigorously by chemical cleaning and mechanical polishing inside a glovebox, both spectroscopic investigations show the existence of a few tens of nanometer-thick surface layers, consisting of lithium oxides and lithium carb…
▽ More
We have investigated the surface of lithium metal using x-ray photoemission spectroscopy and optical spectroscopic ellipsometry. Even if we prepare the surface of lithium metal rigorously by chemical cleaning and mechanical polishing inside a glovebox, both spectroscopic investigations show the existence of a few tens of nanometer-thick surface layers, consisting of lithium oxides and lithium carbonates. When lithium metal is exposed to room air (~50% moisture), in situ real-time monitoring of optical spectra indicates that the surface layer grows at a rate of approximately 24 nm/min, presumably driven by an interface-controlled process. Our results hint that surface-layer-free lithium metals are formidable to achieve by a simple cleaning/polishing method, suggesting that the initial interface between lithium metal electrodes and solid-state electrolytes in fabricated lithium metal batteries can differ from an ideal lithium/electrolyte contact.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
60-nm-span wavelength-tunable vortex fiber laser with intracavity plasmon metasurfaces
Authors:
Lili Gui,
Chuanshuo Wang,
Fei Ding,
Hao Chen,
Xiaosheng Xiao,
Sergey I. Bozhevolnyi,
Xiaoguang Zhang,
Kun Xu
Abstract:
Wavelength-tunable vortex fiber lasers that could generate beams carrying orbital angular momentum (OAM) hold great interest in large-capacity optical communications. The wavelength tunability of conventional vortex fiber lasers is however limited by the range of 35 nm due to narrow bandwidth and/or insertion loss of mode conversion components. Optical metasurfaces apart from being compact planar…
▽ More
Wavelength-tunable vortex fiber lasers that could generate beams carrying orbital angular momentum (OAM) hold great interest in large-capacity optical communications. The wavelength tunability of conventional vortex fiber lasers is however limited by the range of 35 nm due to narrow bandwidth and/or insertion loss of mode conversion components. Optical metasurfaces apart from being compact planar components can flexibly manipulate light with high efficiency in a broad wavelength range. Here, we propose and demonstrate for the first time, to the best of our knowledge, a metasurface-assisted vortex fiber laser that can directly generate OAM beams with changeable topological charges. Due to the designed broadband gap-surface plasmon metasurface, combined with an intracavity tunable filter, the laser enables OAM beam with center wavelength continuously tunable from 1015 nm to 1075 nm, nearly twice of other vortex fiber lasers ever reported. The metasurface can be designed at will to satisfy requirements for either low pump threshold or high slope efficiency of the laser. Furthermore, the cavity-metasurface configuration can be extended to generate higher-order OAM beams or more complex structured beams in different wavelength regions, which greatly broadens the possibilities for developing low-cost and high-quality structured-beam laser sources.
△ Less
Submitted 11 July, 2022;
originally announced July 2022.
-
High temperature nanocomposites with photonic group velocity suppression of thermal emission
Authors:
Andrea Mariño-López,
Oscar Ameneiro-Prieto,
Drew Vecchio,
Xiaofei Xiao,
Ana Sousa-Castillo,
Nicolas Pazos-Perez,
Stefan A. Maier,
Vincenzo Giannini,
Nicholas A. Kotov,
Miguel A. Correa-Duarte,
Ramon A. Alvarez-Puebla
Abstract:
Quenching of thermal emission above 0 K is an unusual material property, essential for future energy, transportation, and space technologies. Despite the great effort invested, nearly complete quenching of thermal radiation rather than some reduction of its flux has only been achieved at low temperatures (below 373 K) and in narrow spectral windows using complex techniques suitable only for small…
▽ More
Quenching of thermal emission above 0 K is an unusual material property, essential for future energy, transportation, and space technologies. Despite the great effort invested, nearly complete quenching of thermal radiation rather than some reduction of its flux has only been achieved at low temperatures (below 373 K) and in narrow spectral windows using complex techniques suitable only for small scale objects. In this work, we present a light and flexible composite material that can suppress propagating photonic modes and, in this way, quench thermal radiation while preserving heat transfer (by thermal conduction) at a room and higher temperature below 600 K. This has been achieved by altering the local photonic density of states and consequentially the thermal properties of carbon nanotubes forming a percolating nanofiber network with a thermostable polymeric matrix.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
The role of receptor uniformity in multivalent binding
Authors:
Xiuyang Xia,
Ge Zhang,
Massimo Pica Ciamarra,
Yang Jiao,
Ran Ni
Abstract:
Multivalency is prevalent in various biological systems and applications due to the superselectivity that arises from the cooperativity of multivalent binding. Traditionally, it was thought that weaker individual binding would improve the selectivity in multivalent targeting. Here using analytical mean field theory and Monte Carlo simulations, we discover that for receptors that are highly uniform…
▽ More
Multivalency is prevalent in various biological systems and applications due to the superselectivity that arises from the cooperativity of multivalent binding. Traditionally, it was thought that weaker individual binding would improve the selectivity in multivalent targeting. Here using analytical mean field theory and Monte Carlo simulations, we discover that for receptors that are highly uniformly distributed, the highest selectivity occurs at an intermediate binding energy and can be significantly greater than the weak binding limit. This is caused by an exponential relationship between the bound fraction and receptor concentration, which is influenced by both the strength and combinatorial entropy of binding. Our findings not only provide new guidelines for the rational design of biosensors using multivalent nano-particles but also introduce a new perspective in understanding biological processes involving multivalency.
△ Less
Submitted 11 April, 2023; v1 submitted 26 June, 2022;
originally announced June 2022.
-
Carbon loss from forest degradation exceeds that from deforestation in the Brazilian Amazon
Authors:
Yuanwei Qin,
Xiangming Xiao,
Jean-Pierre Wigneron,
Philippe Ciais,
Martin Brandt,
Lei Fan,
Xiaojun Li,
Sean Crowell,
Xiaocui Wu,
Russell Doughty,
Yao Zhang,
Fang Liu,
Stephen Sitch,
Berrien Moore III
Abstract:
Spatial-temporal dynamics of aboveground biomass (AGB) and forest area affect the carbon cycle, climate, and biodiversity in the Brazilian Amazon. Here we investigate inter-annual changes of AGB and forest area by analyzing satellite-based annual AGB and forest area datasets. We found the gross forest area loss was larger in 2019 than in 2015, possibly due to recent loosening of forest protection…
▽ More
Spatial-temporal dynamics of aboveground biomass (AGB) and forest area affect the carbon cycle, climate, and biodiversity in the Brazilian Amazon. Here we investigate inter-annual changes of AGB and forest area by analyzing satellite-based annual AGB and forest area datasets. We found the gross forest area loss was larger in 2019 than in 2015, possibly due to recent loosening of forest protection policies. However, net AGB loss was three times smaller in 2019 than in 2015. During 2010-2019, the Brazilian Amazon had a cumulative gross loss of 4.45 Pg C against a gross gain of 3.78 Pg C, resulting in net AGB loss of 0.67 Pg C. Forest degradation (73%) contributed three times more to the gross AGB loss than deforestation (27%), given that the areal extent of degradation exceeds deforestation. This indicates that forest degradation has become the largest process driving carbon loss and should become a higher policy priority.
△ Less
Submitted 15 June, 2022;
originally announced June 2022.
-
Neutron-induced nuclear recoil background in the PandaX-4T experiment
Authors:
Zhou Huang,
Guofang Shen,
Qiuhong Wang,
Abdusalam Abdukerim,
Zihao Bo,
Wei Chen,
Xun Chen,
Yunhua Chen,
Chen Cheng,
Yunshan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Chencheng Han,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang
, et al. (55 additional authors not shown)
Abstract:
Neutron-induced nuclear recoil background is critical to the dark matter searches in the PandaX-4T liquid xenon experiment. This paper studies the feature of neutron background in liquid xenon and evaluates their contribution in the single scattering nuclear recoil events through three methods. The first method is fully Monte Carlo simulation based. The last two are data-driven methods that also u…
▽ More
Neutron-induced nuclear recoil background is critical to the dark matter searches in the PandaX-4T liquid xenon experiment. This paper studies the feature of neutron background in liquid xenon and evaluates their contribution in the single scattering nuclear recoil events through three methods. The first method is fully Monte Carlo simulation based. The last two are data-driven methods that also use the multiple scattering signals and high energy signals in the data, respectively. In the PandaX-4T commissioning data with an exposure of 0.63 tonne-year, all these methods give a consistent result that there are $1.15\pm0.57$ neutron-induced background in dark matter signal region within an approximated nuclear recoil energy window between 5 and 100 keV.
△ Less
Submitted 29 July, 2022; v1 submitted 13 June, 2022;
originally announced June 2022.
-
Machine learning prediction of network dynamics with privacy protection
Authors:
Xin Xia,
Yansen Su,
Linyuan Lv,
Xingyi Zhang,
Ying-Cheng Lai,
Hai-Feng Zhang
Abstract:
Predicting network dynamics based on data, a problem with broad applications, has been studied extensively in the past, but most existing approaches assume that the complete set of historical data from the whole network is available. This requirement presents a great challenge in applications, especially for large, distributed networks in the real world, where data collection is accomplished by ma…
▽ More
Predicting network dynamics based on data, a problem with broad applications, has been studied extensively in the past, but most existing approaches assume that the complete set of historical data from the whole network is available. This requirement presents a great challenge in applications, especially for large, distributed networks in the real world, where data collection is accomplished by many clients in a parallel fashion. Often, each client only has the time series data from a partial set of nodes and the client has access to only partial timestamps of the whole time series data and partial structure of the network. Due to privacy concerns or license related issues, the data collected by different clients cannot be shared. To accurately predict the network dynamics while protecting the privacy of different parties is a critical problem in the modern time. Here, we propose a solution based on federated graph neural networks (FGNNs) that enables the training of a global dynamic model for all parties without data sharing. We validate the working of our FGNN framework through two types of simulations to predict a variety of network dynamics (four discrete and three continuous dynamics). As a significant real-world application, we demonstrate successful prediction of State-wise influenza spreading in the USA. Our FGNN scheme represents a general framework to predict diverse network dynamics through collaborative fusing of the data from different parties without disclosing their privacy.
△ Less
Submitted 9 June, 2022;
originally announced June 2022.
-
Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Thilo Birkenfeld,
Sylvie Blin
, et al. (577 additional authors not shown)
Abstract:
We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n…
▽ More
We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space.
△ Less
Submitted 13 October, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Mass Testing and Characterization of 20-inch PMTs for JUNO
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
Joao Pedro Athayde Marcondes de Andre,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli
, et al. (541 additional authors not shown)
Abstract:
Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program whic…
▽ More
Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK).
△ Less
Submitted 17 September, 2022; v1 submitted 17 May, 2022;
originally announced May 2022.
-
Homophilic and Heterophilic Characteristics Shaping Community Formation in Human Mobility Networks During Extreme Weather Response
Authors:
Cheng-Chun Lee,
Siri Namburi,
Xin Xiao,
Ali Mostafavi
Abstract:
Community formation in socio-spatial human networks is one of the important mechanisms for ameliorating hazard impacts of extreme weather events. Research is scarce regarding latent network characteristics shaping community formation in human mobility networks during natural disasters. We examined human mobility networks in Harris County, Texas, in the context of the managed power outage forced by…
▽ More
Community formation in socio-spatial human networks is one of the important mechanisms for ameliorating hazard impacts of extreme weather events. Research is scarce regarding latent network characteristics shaping community formation in human mobility networks during natural disasters. We examined human mobility networks in Harris County, Texas, in the context of the managed power outage forced by Winter Storm Uri to detect communities and to evaluate latent characteristics in those communities. We examined three characteristics in the communities formed within human mobility networks: hazard-exposure heterophily, socio-demographic homophily, and social connectedness strength. The analysis results show that population movements were shaped by socio-demographic homophily, heterophilic hazard exposure, and social connectedness strength. The results also indicate that a community encompassing more high-impact areas would motivate population movements to areas with weaker social connectedness. Hence, the findings reveal important characteristics shaping community formation in human mobility networks in hazard response. Specific to managed power outages, formed communities are spatially co-located, underscoring a best management practice to avoid prolonged power outages among areas within communities, thus improving hazard-exposure heterophily. The findings have implications for power utility operators to account for the characteristics of socio-spatial human networks when determining the patterns of managed power outages.
△ Less
Submitted 10 May, 2022;
originally announced May 2022.
-
Calibration Strategy of the JUNO-TAO Experiment
Authors:
Hangkun Xu,
Angel Abusleme,
Nikolay V. Anfimov,
Stéphane Callier,
Agustin Campeny,
Guofu Cao,
Jun Cao,
Cedric Cerna,
Yu Chen,
Alexander Chepurnov,
Yayun Ding,
Frederic Druillole,
Andrea Fabbri,
Zhengyong Fei,
Maxim Gromov,
Miao He,
Wei He,
Yuanqiang He,
Joseph yk Hor,
Shaojing Hou,
Jianrun Hu,
Jun Hu,
Cédric Huss,
Xiaolu Ji,
Tao Jiang
, et al. (46 additional authors not shown)
Abstract:
The Taishan Antineutrino Observatory (JUNO-TAO, or TAO) is a satellite detector for the Jiangmen Underground Neutrino Observatory (JUNO). Located near the Taishan reactor, TAO independently measures the reactor's antineutrino energy spectrum with unprecedented energy resolution. To achieve this goal, energy response must be well calibrated. Using the Automated Calibration Unit (ACU) and the Cable…
▽ More
The Taishan Antineutrino Observatory (JUNO-TAO, or TAO) is a satellite detector for the Jiangmen Underground Neutrino Observatory (JUNO). Located near the Taishan reactor, TAO independently measures the reactor's antineutrino energy spectrum with unprecedented energy resolution. To achieve this goal, energy response must be well calibrated. Using the Automated Calibration Unit (ACU) and the Cable Loop System (CLS) of TAO, multiple radioactive sources are deployed to various positions in the detector to perform a precise calibration of energy response. The non-linear energy response can be controlled within 0.6% with different energy points of these radioactive sources. It can be further improved by using $^{12}\rm B$ decay signals produced by cosmic muons. Through the energy non-uniformity calibration, residual non-uniformity is less than 0.2%. The energy resolution degradation and energy bias caused by the residual non-uniformity can be controlled within 0.05% and 0.3%, respectively. In addition, the stability of other detector parameters, such as the gain of each silicon photo-multiplier, can be monitored with a special ultraviolet LED calibration system.
△ Less
Submitted 29 May, 2022; v1 submitted 7 April, 2022;
originally announced April 2022.
-
Chandrasekhar-Kendall-Woltjer-Taylor state in a resistive plasma
Authors:
Ze-Yu Zhai,
Yang-Guang Yang,
Xiao-Liang Xia,
Qun Wang
Abstract:
We give a criterion for the Chandrasekhar-Kendall-Woltjer-Taylor (CKWT) state in a resistive plasma. We find that the lowest momentum (longest wavelength) of the initial helicity amplitudes of magnetic fields are the key to the CKWT state which can be reached if one helicity is favored over the other. This indicates that the imbalance between two helicities at the lowest momentum or longest wavele…
▽ More
We give a criterion for the Chandrasekhar-Kendall-Woltjer-Taylor (CKWT) state in a resistive plasma. We find that the lowest momentum (longest wavelength) of the initial helicity amplitudes of magnetic fields are the key to the CKWT state which can be reached if one helicity is favored over the other. This indicates that the imbalance between two helicities at the lowest momentum or longest wavelength in the initial conditions is essential to the CKWT state. A few examples of initial conditions for helicity amplitudes are taken to support the above statement both analytically and numerically.
△ Less
Submitted 28 February, 2022;
originally announced March 2022.
-
Fully-integrated multipurpose microwave frequency identification system on a single chip
Authors:
Yuhan Yao,
Yuhe Zhao,
Yanxian Wei,
Feng Zhou,
Daigao Chen,
Yuguang Zhang,
Xi Xiao,
Ming Li,
Jianji Dong,
Shaohua Yu,
Xinliang Zhang
Abstract:
We demonstrate a fully-integrated multipurpose microwave frequency identification system on silicon-on-insulator platform. Thanks to its multipurpose features, the chip is able to identify different types of microwave signals, including single-frequency, multiple-frequency, chirped and frequency-hopping microwave signals, as well as discriminate instantaneous frequency variation among the frequenc…
▽ More
We demonstrate a fully-integrated multipurpose microwave frequency identification system on silicon-on-insulator platform. Thanks to its multipurpose features, the chip is able to identify different types of microwave signals, including single-frequency, multiple-frequency, chirped and frequency-hopping microwave signals, as well as discriminate instantaneous frequency variation among the frequency-modulated signals. This demonstration exhibits fully integrated solution and fully functional microwave frequency identification, which can meet the requirements in reduction of size, weight and power for future advanced microwave photonic processor.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Characterizing Equitable Access to Grocery Stores During Disasters Using Location-based Data
Authors:
Amir Esmalian,
Natalie Coleman,
Faxi Yuan,
Xin Xiao,
Ali Mostafavi
Abstract:
Natural hazards cause disruptions in access to critical facilities, such as grocery stores, impeding residents ability to prepare for and cope with hardships during the disaster and recovery; however, disrupted access to critical facilities is not equal for all residents of a community. In this study, we examine disparate access to grocery stores in the context of the 2017 Hurricane Harvey in Harr…
▽ More
Natural hazards cause disruptions in access to critical facilities, such as grocery stores, impeding residents ability to prepare for and cope with hardships during the disaster and recovery; however, disrupted access to critical facilities is not equal for all residents of a community. In this study, we examine disparate access to grocery stores in the context of the 2017 Hurricane Harvey in Harris County, Texas. We utilized high-resolution location-based datasets in implementing spatial network analysis and dynamic clustering techniques to uncover the overall disparate access to grocery stores for socially vulnerable populations during different phases of the disaster. Three access indicators are examined using network-centric measures: number of unique stores visited, average trip time to stores, and average distance to stores. These access indicators help us capture three dimensions of access: redundancy, rapidity, and proximity. The findings show the insufficiency of focusing merely on the distributional factors, such as location in a food desert and number of facilities, to capture the disparities in access, especially during the preparation and impact/short-term recovery periods. Furthermore, the characterization of access by considering combinations of access indicators reveals that flooding disproportionally affects socially vulnerable populations. High-income areas have better access during preparation as they are able to visit a greater number of stores and commute farther distances to obtain supplies. The conclusions of this study have important implications for urban development (facility distribution), emergency management, and resource allocation by identifying areas most vulnerable to disproportionate access impacts using more equity-focused and data-driven approaches.
△ Less
Submitted 22 October, 2022; v1 submitted 3 January, 2022;
originally announced January 2022.