Acceleration of 60 MeV proton beams in the commissioning experiment of SULF-10 PW laser
Authors:
A. X. Li,
C. Y. Qin,
H. Zhang,
S. Li,
L. L. Fan,
Q. S. Wang,
T. J. Xu,
N. W. Wang,
L. H. Yu,
Y. Xu,
Y. Q. Liu,
C. Wang,
X. L. Wang,
Z. X. Zhang,
X. Y. Liu,
P. L. Bai,
Z. B. Gan,
X. B. Zhang,
X. B. Wang,
C. Fan,
Y. J. Sun,
Y. H. Tang,
B. Yao,
X. Y. Liang,
Y. X. Leng
, et al. (3 additional authors not shown)
Abstract:
We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 1…
▽ More
We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 10^{21} W/cm^2. First laser-proton acceleration experiment is performed using plain copper and plastic targets. High-energy proton beams with maximum cut-off energy up to 62.5 MeV are achieved using copper foils at the optimum target thickness of 4 μm via target normal sheath acceleration (TNSA). For plastic targets of tens of nanometers thick, the proton cut-off energy is approximately 20 MeV, showing ring-like or filamented density distributions. These experimental results reflect the capabilities of the SULF-10 PW beamline, e.g., both ultrahigh intensity and relatively good beam contrast. Further optimization for these key parameters is underway, where peak laser intensities of 10^{22}-10^{23} W/cm^2 are anticipated to support various experiments on extreme field physics.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
High quality electron bunch generation with CO2-laser plasma accelerator
Authors:
L. G. Zhang,
B. F. Shen,
J. C. Xu,
L. L. Ji,
X. M. Zhang,
W. P. Wang,
X. Y. Zhao,
L. Q. Yi,
Y. H. Yu,
Y. Shi,
T. J. Xu,
Z. Z. Xu
Abstract:
CO2 laser-driven electron acceleration is demonstrated with particle-in-cell simulation in low-density plasma. An intense CO2 laser pulse with long wavelength excites wakefield. The bubble behind it has a broad space to sustain a large amount of electrons before reaching its charge saturation limit. A transversely propagating inject pulse is used to induce and control the ambient electron injectio…
▽ More
CO2 laser-driven electron acceleration is demonstrated with particle-in-cell simulation in low-density plasma. An intense CO2 laser pulse with long wavelength excites wakefield. The bubble behind it has a broad space to sustain a large amount of electrons before reaching its charge saturation limit. A transversely propagating inject pulse is used to induce and control the ambient electron injection. The accelerated electron bunch with total charge up to 10 nC and the average charge per energy interval of more than 0.6 nC/MeV are obtained. Plasma-based electron acceleration driven by intense CO2 laser provides a new potential way to generate high-charge electron bunch with low energy spread, which has broad applications, especially for X-ray generation by table-top FEL and bremsstrahlung.
△ Less
Submitted 25 March, 2014;
originally announced March 2014.
