-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Electrical Impedance Tomography Based Closed-loop Tumor Treating Fields in Dynamic Lung Tumors
Authors:
Minmin Wang,
Xu Xie,
Yuxi Guo,
Liying Zhu,
Yue Lan,
Haitang Yang,
Yun Pan,
Guangdi Chen,
Shaomin Zhang,
Maomao Zhang
Abstract:
Tumor Treating Fields (TTFields) is a non-invasive anticancer modality that utilizes alternating electric fields to disrupt cancer cell division and growth. While generally well-tolerated with minimal side effects, traditional TTFields therapy for lung tumors faces challenges due to the influence of respiratory motion. We design a novel closed-loop TTFields strategy for lung tumors by incorporatin…
▽ More
Tumor Treating Fields (TTFields) is a non-invasive anticancer modality that utilizes alternating electric fields to disrupt cancer cell division and growth. While generally well-tolerated with minimal side effects, traditional TTFields therapy for lung tumors faces challenges due to the influence of respiratory motion. We design a novel closed-loop TTFields strategy for lung tumors by incorporating electrical impedance tomography (EIT) for real-time respiratory phase monitoring and dynamic parameter adjustments. Furthermore, we conduct theoretical analysis to evaluate the performance of the proposed method using the lung motion model. Compared to conventional TTFields settings, we observed that variations in the electrical conductivity of lung during different respiratory phases led to a decrease in the average electric field intensity within lung tumors, transitioning from end-expiratory (1.08 V/cm) to end-inspiratory (0.87 V/cm) phases. Utilizing our proposed closed-Loop TTFields approach at the same dose setting (2400 mA, consistent with the traditional TTFields setting), we can achieve a higher and consistent average electric field strength at the tumor site (1.30 V/cm) across different respiratory stages. Our proposed closed-loop TTFields method has the potential to improved lung tumor therapy by mitigating the impact of respiratory motion.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Multicell-Fold: geometric learning in folding multicellular life
Authors:
Haiqian Yang,
Anh Q. Nguyen,
Dapeng Bi,
Markus J. Buehler,
Ming Guo
Abstract:
During developmental processes such as embryogenesis, how a group of cells fold into specific structures, is a central question in biology that defines how living organisms form. Establishing tissue-level morphology critically relies on how every single cell decides to position itself relative to its neighboring cells. Despite its importance, it remains a major challenge to understand and predict…
▽ More
During developmental processes such as embryogenesis, how a group of cells fold into specific structures, is a central question in biology that defines how living organisms form. Establishing tissue-level morphology critically relies on how every single cell decides to position itself relative to its neighboring cells. Despite its importance, it remains a major challenge to understand and predict the behavior of every cell within the living tissue over time during such intricate processes. To tackle this question, we propose a geometric deep learning model that can predict multicellular folding and embryogenesis, accurately capturing the highly convoluted spatial interactions among cells. We demonstrate that multicellular data can be represented with both granular and foam-like physical pictures through a unified graph data structure, considering both cellular interactions and cell junction networks. We successfully use our model to achieve two important tasks, interpretable 4-D morphological sequence alignment, and predicting local cell rearrangements before they occur at single-cell resolution. Furthermore, using an activation map and ablation studies, we demonstrate that cell geometries and cell junction networks together regulate local cell rearrangement which is critical for embryo morphogenesis. This approach provides a novel paradigm to study morphogenesis, highlighting a unified data structure and harnessing the power of geometric deep learning to accurately model the mechanisms and behaviors of cells during development. It offers a pathway toward creating a unified dynamic morphological atlas for a variety of developmental processes such as embryogenesis.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Machine Learning-Assisted 3D Printing of Thermoelectric Materials of Ultrahigh Performances at Room Temperature
Authors:
Kaidong Song,
Guoyue Xu,
A. N. M. Tanvir,
Ke Wang,
Md Omarsany Bappy,
Haijian Yang,
Wenjie Shang,
Le Zhou,
Alexander Dowling,
Tengei Luo,
Yanliang Zhang
Abstract:
Thermoelectric energy conversion is an attractive technology for generating electricity from waste heat and using electricity for solid-state cooling. However, conventional manufacturing processes for thermoelectric devices are costly and limited to simple device geometries. This work reports an extrusion printing method to fabricate high-performance thermoelectric materials with complex 3D archit…
▽ More
Thermoelectric energy conversion is an attractive technology for generating electricity from waste heat and using electricity for solid-state cooling. However, conventional manufacturing processes for thermoelectric devices are costly and limited to simple device geometries. This work reports an extrusion printing method to fabricate high-performance thermoelectric materials with complex 3D architectures. By integrating high-throughput experimentation and Bayesian optimization (BO), our approach significantly accelerates the simultaneous search for the optimal ink formulation and printing parameters that deliver high thermoelectric performances while maintaining desired shape fidelity. A Gaussian process regression (GPR)-based machine learning model is employed to expeditiously predict thermoelectric power factor as a function of ink formulation and printing parameters. The printed bismuth antimony telluride (BiSbTe)-based thermoelectric materials under the optimized conditions exhibit an ultrahigh room temperature zT of 1.3, which is by far the highest in the printed thermoelectric materials. The machine learning-guided ink-based printing strategy can be highly generalizable to a wide range of functional materials and devices for broad technological applications.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
The neutron array of the compact spectrometer for heavy ion experiments in Fermi energy region
Authors:
Dawei Si,
Sheng Xiao,
Yuhao Qin,
Yijie Wang,
Junhuai Xu,
Baiting Tian,
Boyuan Zhang,
Dong Guo,
Qin Zhi,
Xiaobao Wei,
Yibo Hao,
Zengxiang Wang,
Tianren Zhuo,
Yuansheng Yang,
Xianglun Wei,
Herun Yang,
Peng Ma,
Limin Duan,
Fangfang Duan,
Junbing Ma,
Shiwei Xu,
Zhen Bai,
Guo Yang,
Yanyun Yang,
Zhigang Xiao
Abstract:
The emission of neutrons from heavy ion reactions is an important observable for studying the asymmetric nuclear equation of state and the reaction dynamics. A 20-unit neutron array has been developed and mounted on the compact spectrometer for heavy ion experiments (CSHINE) to measure the neutron spectra, neutron-neutron and neutron-proton correlation functions. Each unit consists of a…
▽ More
The emission of neutrons from heavy ion reactions is an important observable for studying the asymmetric nuclear equation of state and the reaction dynamics. A 20-unit neutron array has been developed and mounted on the compact spectrometer for heavy ion experiments (CSHINE) to measure the neutron spectra, neutron-neutron and neutron-proton correlation functions. Each unit consists of a $\rm 15\times 15\times 15~cm^3$ plastic scintillator coupled to a $ φ=52 ~\rm mm$ photomultiplier. The Geant4 simulation with optical process is performed to investigate the time resolution and the neutron detection efficiency. The inherent time resolution of 212 ps is obtained by cosmic ray coincidence test. The n-$γ$ discrimination and time-of-flight performance are given by $\rm ^{252}Cf$ radioactive source test and beam test. The neutron energy spectra have been obtained in the angle range $30^\circ \le θ_{\rm lab} \le 51^\circ$ in the beam experiment of $^{124}$Sn+$^{124}$Sn at 25 MeV/u with CSHINE.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
PIC2O-Sim: A Physics-Inspired Causality-Aware Dynamic Convolutional Neural Operator for Ultra-Fast Photonic Device FDTD Simulation
Authors:
Pingchuan Ma,
Haoyu Yang,
Zhengqi Gao,
Duane S. Boning,
Jiaqi Gu
Abstract:
The finite-difference time-domain (FDTD) method, which is important in photonic hardware design flow, is widely adopted to solve time-domain Maxwell equations. However, FDTD is known for its prohibitive runtime cost, taking minutes to hours to simulate a single device. Recently, AI has been applied to realize orders-of-magnitude speedup in partial differential equation (PDE) solving. However, AI-b…
▽ More
The finite-difference time-domain (FDTD) method, which is important in photonic hardware design flow, is widely adopted to solve time-domain Maxwell equations. However, FDTD is known for its prohibitive runtime cost, taking minutes to hours to simulate a single device. Recently, AI has been applied to realize orders-of-magnitude speedup in partial differential equation (PDE) solving. However, AI-based FDTD solvers for photonic devices have not been clearly formulated. Directly applying off-the-shelf models to predict the optical field dynamics shows unsatisfying fidelity and efficiency since the model primitives are agnostic to the unique physical properties of Maxwell equations and lack algorithmic customization. In this work, we thoroughly investigate the synergy between neural operator designs and the physical property of Maxwell equations and introduce a physics-inspired AI-based FDTD prediction framework PIC2O-Sim which features a causality-aware dynamic convolutional neural operator as its backbone model that honors the space-time causality constraints via careful receptive field configuration and explicitly captures the permittivity-dependent light propagation behavior via an efficient dynamic convolution operator. Meanwhile, we explore the trade-offs among prediction scalability, fidelity, and efficiency via a multi-stage partitioned time-bundling technique in autoregressive prediction. Multiple key techniques have been introduced to mitigate iterative error accumulation while maintaining efficiency advantages during autoregressive field prediction. Extensive evaluations on three challenging photonic device simulation tasks have shown the superiority of our PIC2O-Sim method, showing 51.2% lower roll-out prediction error, 23.5 times fewer parameters than state-of-the-art neural operators, providing 300-600x higher simulation speed than an open-source FDTD numerical solver.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Beam test results of the prototype of the multi wire drift chamber for the CSR external-target experiment
Authors:
Zhi Qin,
Zhoubo He,
Zhe Cao,
Tao Chen,
Zhi Deng,
Limin Duan,
Dong Guo,
Rongjiang Hu,
Jie Kong,
Canwen Liu,
Peng Ma,
Xianglun Wei,
Shihai Wen,
Xiangjie Wen,
Junwei Yan,
Herun Yang,
Zuoqiao Yang,
Yuhong Yu,
Zhigang Xiao
Abstract:
The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with…
▽ More
The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with respect to the vertical axis, respectively. The sensitive area of the prototype is $76 {\rm cm} \times 76 {\rm cm}$. The amplified and shaped signals from the anode wires are digitized in a serial capacity array. Being operated with 1500 V high voltage on the anode wires, the efficiency for each layer is beyond 95\%. The tracking residual is about $301 \pm 2 \rm μm$. The performance meets the requirements of CEE.
△ Less
Submitted 15 May, 2024;
originally announced June 2024.
-
Acceleration without Disruption: DFT Software as a Service
Authors:
Fusong Ju,
Xinran Wei,
Lin Huang,
Andrew J. Jenkins,
Leo Xia,
Jia Zhang,
Jianwei Zhu,
Han Yang,
Bin Shao,
Peggy Dai,
Ashwin Mayya,
Zahra Hooshmand,
Alexandra Efimovskaya,
Nathan A. Baker,
Matthias Troyer,
Hongbin Liu
Abstract:
Density functional theory (DFT) has been a cornerstone in computational chemistry, physics, and materials science for decades, benefiting from advancements in computational power and theoretical methods. This paper introduces a novel, cloud-native application, Accelerated DFT, which offers an order of magnitude acceleration in DFT simulations. By integrating state-of-the-art cloud infrastructure a…
▽ More
Density functional theory (DFT) has been a cornerstone in computational chemistry, physics, and materials science for decades, benefiting from advancements in computational power and theoretical methods. This paper introduces a novel, cloud-native application, Accelerated DFT, which offers an order of magnitude acceleration in DFT simulations. By integrating state-of-the-art cloud infrastructure and redesigning algorithms for graphic processing units (GPUs), Accelerated DFT achieves high-speed calculations without sacrificing accuracy. It provides an accessible and scalable solution for the increasing demands of DFT calculations in scientific communities. The implementation details, examples, and benchmark results illustrate how Accelerated DFT can significantly expedite scientific discovery across various domains.
△ Less
Submitted 16 June, 2024;
originally announced June 2024.
-
Artificial Intelligence for Neuro MRI Acquisition: A Review
Authors:
Hongjia Yang,
Guanhua Wang,
Ziyu Li,
Haoxiang Li,
Jialan Zheng,
Yuxin Hu,
Xiaozhi Cao,
Congyu Liao,
Huihui Ye,
Qiyuan Tian
Abstract:
Magnetic resonance imaging (MRI) has significantly benefited from the resurgence of artificial intelligence (AI). By leveraging AI's capabilities in large-scale optimization and pattern recognition, innovative methods are transforming the MRI acquisition workflow, including planning, sequence design, and correction of acquisition artifacts. These emerging algorithms demonstrate substantial potenti…
▽ More
Magnetic resonance imaging (MRI) has significantly benefited from the resurgence of artificial intelligence (AI). By leveraging AI's capabilities in large-scale optimization and pattern recognition, innovative methods are transforming the MRI acquisition workflow, including planning, sequence design, and correction of acquisition artifacts. These emerging algorithms demonstrate substantial potential in enhancing the efficiency and throughput of acquisition steps. This review discusses several pivotal AI-based methods in neuro MRI acquisition, focusing on their technological advances, impact on clinical practice, and potential risks.
△ Less
Submitted 9 June, 2024;
originally announced June 2024.
-
SynAsk: Unleashing the Power of Large Language Models in Organic Synthesis
Authors:
Chonghuan Zhang,
Qianghua Lin,
Biwei Zhu,
Haopeng Yang,
Xiao Lian,
Hao Deng,
Jiajun Zheng,
Kuangbiao Liao
Abstract:
The field of natural language processing (NLP) has witnessed a transformative shift with the emergence of large language models (LLMs), revolutionizing various language tasks and applications, and the integration of LLM into specialized domains enhances their capabilities for domain-specific applications. Notably, NLP has made significant strides in organic chemistry, particularly in predicting sy…
▽ More
The field of natural language processing (NLP) has witnessed a transformative shift with the emergence of large language models (LLMs), revolutionizing various language tasks and applications, and the integration of LLM into specialized domains enhances their capabilities for domain-specific applications. Notably, NLP has made significant strides in organic chemistry, particularly in predicting synthetic tasks, paving the way for the development of LLMs tailored to the organic chemistry field. In this work, we introduce SynAsk, a comprehensive organic chemistry domain-specific LLM platform developed by AIChemEco Inc. By finetuning an LLM with domain-specific data and integrating it with a chain of thought approach, SynAsk seamlessly accesses our knowledge base and advanced chemistry tools in a question-and-answer format. This includes functionalities such as a basic chemistry knowledge base, molecular information retrieval, reaction performance prediction, retrosynthesis prediction, chemical literature acquisition, and more. This novel methodology synergizes fine-tuning techniques with external resource integration, resulting in an organic chemistry-specific model poised to facilitate research and discovery in the field. Accessible via http://synask.aichemeco.com, SynAsk represents a significant advancement in leveraging NLP for synthetic applications.
△ Less
Submitted 13 June, 2024; v1 submitted 6 June, 2024;
originally announced June 2024.
-
Optical biomarker of metabolism for breast tumor diagnosis: Insights from subcellular dynamics
Authors:
Zichen Yin,
Shuwei Zhang,
Bin He,
Houpu Yang,
Zhengyu Chen,
Zhangwei Hu,
Yejiong Shi,
Ruizhi Xue,
Panqi Yang,
Yuzhe Ying,
Chengming Wang,
Shu Wang,
Ping Xue
Abstract:
Label-free metabolic dynamics contrast is highly appealing but difficult to achieve in biomedical imaging. Interference offers a highly sensitive mechanism for capturing the metabolic dynamics of the subcellular scatterers. However, traditional interference detection methods fail to isolate pure metabolic dynamics, as the dynamic signals are coupled with scatterer reflectivity and other uncontroll…
▽ More
Label-free metabolic dynamics contrast is highly appealing but difficult to achieve in biomedical imaging. Interference offers a highly sensitive mechanism for capturing the metabolic dynamics of the subcellular scatterers. However, traditional interference detection methods fail to isolate pure metabolic dynamics, as the dynamic signals are coupled with scatterer reflectivity and other uncontrollable imaging factors. Here, we demonstrate active phase modulation-assisted dynamic full-field optical coherence tomography (APMD-FFOCT) that decouples and quantifies the metabolic dynamics by adding a reference movement for all interferential scatterers. This novel technique enables imaging and dynamic analysis of subcellular structures along with their changes during the apoptotic process in tumor tissues. Furthermore, the nucleus-to-cytoplasm dynamic intensity ratio could serve as an optical biomarker for breast tumor grading, enhancing intraoperative diagnosis.
△ Less
Submitted 6 June, 2024;
originally announced June 2024.
-
Gate-Tunable Multi-Band van der Waals Photodetector and Polarization Sensor
Authors:
Daozhi Shen,
HeeBong Yang,
Tarun Patel,
Daniel A. Rhodes,
Thomas Timusk,
Y. Norman Zhou,
Na Young Kim,
Adam W. Tsen
Abstract:
A single photodetector with tunable detection wavelengths and polarization sensitivity can potentially be harnessed for diverse optical applications ranging from imaging and sensing to telecommunications. Such a device will require the combination of multiple material systems with different structures, bandgaps, and photoelectrical responses, which is extremely difficult to engineer using traditio…
▽ More
A single photodetector with tunable detection wavelengths and polarization sensitivity can potentially be harnessed for diverse optical applications ranging from imaging and sensing to telecommunications. Such a device will require the combination of multiple material systems with different structures, bandgaps, and photoelectrical responses, which is extremely difficult to engineer using traditional epitaxial films. Here, we develop a multi-functional and high-performance photosensor using all van der Waals materials. The device features a gate-tunable spectral response that is switchable between near-infrared/visible and short-/mid-wave infrared, as well as broadband operation, at room temperature. The linear polarization sensitivity in the telecommunications O-band can also be directly modulated between horizontal, vertical, and nonpolarizing modes. These effects originate from the balance of photocurrent generation in two of the active layers that can be manipulated by an electric field. The photodetector features high detectivity (>109 cmHz1/2W-1) together with fast operation speed (~ 1 MHz) and can be further exploited for dual visible and infrared imaging.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
Machine learning disentangles bias causes of shortwave cloud radiative effect in a climate model
Authors:
Hongtao Yang,
Guoxing Chen,
Wei-Chyung Wang,
Qing Bao,
Jiandong Li
Abstract:
Large bias exists in shortwave cloud radiative effect (SWCRE) of general circulation models (GCMs), attributed mainly to the combined effect of cloud fraction and water contents, whose representations in models remain challenging. Here we show an effective machine-learning approach to dissect the individual bias of relevant cloud parameters determining SWCRE. A surrogate model for calculating SWCR…
▽ More
Large bias exists in shortwave cloud radiative effect (SWCRE) of general circulation models (GCMs), attributed mainly to the combined effect of cloud fraction and water contents, whose representations in models remain challenging. Here we show an effective machine-learning approach to dissect the individual bias of relevant cloud parameters determining SWCRE. A surrogate model for calculating SWCRE was developed based on random forest using observations and FGOALS-f3-L simulation data of cloud fraction (CFR), cloud-solar concurrence ratio (CSC), cloud liquid and ice water paths (LWP and IWP), TOA upward clear-sky solar flux (SUC), and solar zenith angle. The model, which achieves high determination coefficient > 0.96 in the validation phase, was then used to quantify SWCRE bias associated with these parameters following the partial radiation perturbation method. The global-mean SWCRE bias (in W m-2) is contributed by CFR (+5.11), LWP (-6.58), IWP (-1.67), and CSC (+4.38), while SUC plays a minor role; the large CSC contribution highlights the importance of cloud diurnal variation. Regionally, the relative importance varies according to climate regimes. In Tropics, overestimated LWP and IWP exist over lands, while oceans exhibit underestimated CFR and CSC. In contrast, the extratropical lands and oceans have, respectively, too-small CSC and the 'too few, too bright' low-level clouds. We thus suggest that machine learning, in addition for developing GCM physical parameterizations, can also be utilized for diagnosing and understanding complex cloud-climate interactions.
△ Less
Submitted 11 May, 2024;
originally announced May 2024.
-
Flexible multi-bunch-length operation for continuous-wave x-ray free-electron lasers
Authors:
Zihan Zhu,
Jiawei Yan,
Hanxiang Yang,
Duan Gu,
Bart Faatz,
Haixiao Deng,
Qiang Gu
Abstract:
The X-ray free-electron lasers (XFELs) are cutting-edge instruments pivotal in a broad range of fields, providing high-power X-ray pulses with durations spanning from femtoseconds to attoseconds. One of the critical challenges in XFEL facilities is the simultaneous accommodation of diverse requirements for XFEL operation modes and photon properties across different undulator lines. This paper prop…
▽ More
The X-ray free-electron lasers (XFELs) are cutting-edge instruments pivotal in a broad range of fields, providing high-power X-ray pulses with durations spanning from femtoseconds to attoseconds. One of the critical challenges in XFEL facilities is the simultaneous accommodation of diverse requirements for XFEL operation modes and photon properties across different undulator lines. This paper proposes a dipole-kicker combination in the bunch compressors to vary the electron bunch length for the continuous-wave XFEL facilities driven by a superconducting linac. This method enables optimization of the electron bunch length on a per-bunch basis, tailored to each specific needs of each undulator. Through start-to-end simulations based on the parameters of the Shanghai high-repetition-rate XFEL and extreme light facility, we demonstrate the feasibility of this technique. The results show its effectiveness in enabling simultaneous operations of self-amplified spontaneous emission and externally seeded FEL across different undulator lines, ensuring optimal electron bunch compression for each undulator line.
△ Less
Submitted 30 April, 2024;
originally announced May 2024.
-
A newly developed multi-kilo-channel high-speed and precision waveform digitization system for neutrino experiments
Authors:
H. Yang,
T. Xue,
L. Jiang,
C. Xu,
Q. Pan,
B. Liang,
G. Gong,
B. Xu,
Z. Wang,
S. Chen,
Y. Liu,
J. Li
Abstract:
The Jinping Neutrino Experiment(JNE), conducted within the China Jinping Underground Laboratory, aims to detect and analyze of solar neutrinos, geo-neutrinos, and supernova neutrinos. A one-ton prototype will soon be in commision with an upgrade from 30 channels to 60 channels, which will increase the data bandwidth by one to two orders of magnitude and exceed the capacity of the current CAEN DAQ…
▽ More
The Jinping Neutrino Experiment(JNE), conducted within the China Jinping Underground Laboratory, aims to detect and analyze of solar neutrinos, geo-neutrinos, and supernova neutrinos. A one-ton prototype will soon be in commision with an upgrade from 30 channels to 60 channels, which will increase the data bandwidth by one to two orders of magnitude and exceed the capacity of the current CAEN DAQ system. Additionally, enhancing the performance and flexibility of JNE DAQ system is crucial. This paper presents the design of a new Tsinghua DAQ system for the JNE and its performance and stability. The new Tsinghua DAQ(THDAQ) system for JNE is based on the cPCI protocol and demonstrates powerful performance improvements: ADC ENOB of the THDAQ system approximately exceeds 9.8-bit, marking a 14% improvement over the CAEN DAQ system; The maximum clock deviation within a single chassis is 85.6 ps, satisfying sub-nanosecond synchronization criteria; Each DAQ board features two QSFP+ optical ports with 82.5Gbps transmission capability, while the PCIe board supports a transmission rate of 100.2 Gbps. In addition, comparative experiments between the two systems were also tested in detail. The analysis results of waveform and charge spectrum prove the high stability of the THDAQ system. This provides a foundation for the 60-channel and 4000-channel DAQ systems.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Role of nonlocal heat transport on the laser ablative Rayleigh-Taylor instability
Authors:
Z. H. Chen,
X. H. Yang,
G. B. Zhang,
Y. Y. Ma,
R. Yan,
H. Xu,
Z. M. Sheng,
F. Q. Shao,
J. Zhang
Abstract:
Ablative Rayleigh-Taylor instability (ARTI) and nonlocal heat transport are the critical problems in laser-driven inertial confinement fusion, while their coupling with each other is not completely understood yet. Here the ARTI in the presence of nonlocal heat transport is studied self-consistently for the first time theoretically and by using radiation hydrodynamic simulations. It is found that t…
▽ More
Ablative Rayleigh-Taylor instability (ARTI) and nonlocal heat transport are the critical problems in laser-driven inertial confinement fusion, while their coupling with each other is not completely understood yet. Here the ARTI in the presence of nonlocal heat transport is studied self-consistently for the first time theoretically and by using radiation hydrodynamic simulations. It is found that the nonlocal heat flux generated by the hot electron transport tends to attenuate the growth of instability, especially for short wavelength perturbations. A linear theory of the ARTI coupled with the nonlocal heat flux is developed, and a prominent stabilization of the ablation front via the nonlocal heat flux is found, in good agreement with numerical simulations. This effect becomes more significant as the laser intensity increases. Our results should have important references for the target designing for inertial confinement fusion.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Disentanglement of mixed interference fringes in optical interferometers: theory and applications
Authors:
Kaiyuan Yang,
Weilong Wei,
Xiafei Ma,
Botao Chen,
Junqiu Chu,
Xinling Liu,
Yuhua Cheng,
Hu Yang,
Haotong Ma,
Bo Qi,
Zongliang Xie
Abstract:
Optical interferometric imaging enables astronomical observation at extremely high angular resolution. The necessary optical information for imaging, such as the optical path differences and visibilities, is easy to extract from fringes generated by the combination of two beams. With more than two apertures, the image-plane interference pattern becomes an increasingly indistinguishable mixture of…
▽ More
Optical interferometric imaging enables astronomical observation at extremely high angular resolution. The necessary optical information for imaging, such as the optical path differences and visibilities, is easy to extract from fringes generated by the combination of two beams. With more than two apertures, the image-plane interference pattern becomes an increasingly indistinguishable mixture of fringe spacings and directions. For decades, the state-of-the-art approaches for obtaining two-aperture fringes from an interferometer array composed of many apertures are limited to pairwise combinations using bulk optics. Here, we derive and demonstrate a fringe disentanglement theory that can digitally transform the interference pattern of N apertures to N(N-1)/2 pairwise fringes without any optics, thus providing straightforward methods of information acquisition for interferometers. We demonstrate applications of our technique by both simulation and experiment, showing that this theory can be used for simultaneously sensing pistons and determining the individual visibilities of all combining apertures. Furthermore, we use the proposed theory to phase a 1.5-meter segmented flat telescope, demonstrating its validity for engineering implementation. This theory may not only benefit optical imaging but also interferometry-based measurements, by providing an exceptional capability to simplify the interferometric output generated by a system of many apertures.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Shaping a Surface Microdroplet by Marangoni Forces along a Moving Contact Line of Four Immiscible Phases
Authors:
Haichang Yang,
Binglin Zeng,
Qiuyun Lu,
Yaowen Xing,
Xiahui Gui,
Yijun Cao,
Ben Bin Xu,
Xuehua Zhang
Abstract:
The ability to transfer microdroplets between fluid phases offers numerous advantages in various fields, enabling better control, manipulation, and utilization of small volumes of fluids in pharmaceutical formulations, microfluidics, and lab-on-a-chip devices, single-cell analysis or droplet-based techniques for nanomaterial synthesis. This study focuses on the stability and morphology of a sessil…
▽ More
The ability to transfer microdroplets between fluid phases offers numerous advantages in various fields, enabling better control, manipulation, and utilization of small volumes of fluids in pharmaceutical formulations, microfluidics, and lab-on-a-chip devices, single-cell analysis or droplet-based techniques for nanomaterial synthesis. This study focuses on the stability and morphology of a sessile oil microdroplet at the four-phase contact line of solid-water-oil-air during the droplet transfer from underwater to air. We observed a distinct transition in microdroplet dynamics, characterized by a shift from a scenario dominated by Marangoni forces to one dominated by capillary forces. In the regime dominated by Marangoni forces, the oil microdroplets spread in response to the contact between the water-air interface and the water-oil interface and the emergence of an oil concentration gradient along the water-air interface. The spreading distance along the four-phase contact line follows a power law relationship of $t^{3/4}$, reflecting the balance between Marangoni forces and viscous forces. On the other hand, in the capillarity-dominated regime, the oil microdroplets remain stable at the contact line and after being transferred into the air. We identify the crossover between these two regimes in the parameter space defined by three factors: the approaching velocity of the solid-water-air contact line ($v_{cl}$), the radius of the oil microdroplet ($r_o$), and the radius of the water drop ($r_w$). Furthermore, we demonstrate how to use the four-phase contact line for shaping oil microdroplets using a full liquid process by the contact line lithography. The findings in this study may be also applied to materials synthesis where nanoparticles, microspheres, or nanocapsules are produced by microdroplet-based techniques.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Picotesla-sensitivity microcavity optomechanical magnetometry
Authors:
Zhi-Gang Hu,
Yi-Meng Gao,
Jian-Fei Liu,
Hao Yang,
Min Wang,
Yuechen Lei,
Xin Zhou,
Jincheng Li,
Xuening Cao,
Jinjing Liang,
Chao-Qun Hu,
Zhilin Li,
Yong-Chang Lau,
Jian-Wang Cai,
Bei-Bei Li
Abstract:
Cavity optomechanical systems have enabled precision sensing of magnetic fields, by leveraging the optical resonance-enhanced readout and mechanical resonance-enhanced response. Previous studies have successfully achieved scalable and reproducible microcavity optomechanical magnetometry (MCOM) by incorporating Terfenol-D thin films into high-quality ($Q$) factor whispering gallery mode (WGM) micro…
▽ More
Cavity optomechanical systems have enabled precision sensing of magnetic fields, by leveraging the optical resonance-enhanced readout and mechanical resonance-enhanced response. Previous studies have successfully achieved scalable and reproducible microcavity optomechanical magnetometry (MCOM) by incorporating Terfenol-D thin films into high-quality ($Q$) factor whispering gallery mode (WGM) microcavities. However, the sensitivity was limited to 585 pT/Hz$^{1/2}$, over 20 times inferior to those using Terfenol-D particles. In this work, we propose and demonstrate a high-sensitivity and scalable MCOM approach by sputtering a FeGaB thin film onto a high-$Q$ SiO$_2$ WGM microdisk. Theoretical studies are conducted to explore the magnetic actuation constant and noise-limited sensitivity by varying the parameters of the FeGaB film and SiO$_2$ microdisk. Multiple magnetometers with different radii are fabricated and characterized. By utilizing a microdisk with a radius of 355 $μ$m and a thickness of 1 $μ$m, along with a FeGaB film with a radius of 330 $μ$m and a thickness of 1.3 $μ$m, we have achieved a remarkable peak sensitivity of 1.68 pT/Hz$^{1/2}$ at 9.52 MHz. This represents a significant improvement of over two orders of magnitude compared with previous studies employing sputtered Terfenol-D film. Notably, the magnetometer operates without a bias magnetic field, thanks to the remarkable soft magnetic properties of the FeGaB film. Furthermore, as a proof-of-concept, we have demonstrated the real-time measurement of a pulsed magnetic field simulating the corona current in a high-voltage transmission line using our developed magnetometer. These high-sensitivity magnetometers hold great potential for various applications, such as magnetic induction tomography and corona current monitoring.
△ Less
Submitted 21 March, 2024;
originally announced March 2024.
-
DaISy: Diffuser-aided Sub-THz Imaging System
Authors:
Shao-Hsuan Wu,
Yiyao Zhang,
Ke Chen,
Shang Hua Yang
Abstract:
Sub-terahertz (Sub-THz) waves possess exceptional attributes, capable of penetrating non-metallic and non-polarized materials while ensuring bio-safety. However, their practicality in imaging is marred by the emergence of troublesome speckle artifacts, primarily due to diffraction effects caused by wavelengths comparable to object dimensions. In addressing this limitation, we present the Diffuser-…
▽ More
Sub-terahertz (Sub-THz) waves possess exceptional attributes, capable of penetrating non-metallic and non-polarized materials while ensuring bio-safety. However, their practicality in imaging is marred by the emergence of troublesome speckle artifacts, primarily due to diffraction effects caused by wavelengths comparable to object dimensions. In addressing this limitation, we present the Diffuser-aided sub-THz Imaging System (DaISy), which utilizes a diffuser and a focusing lens to convert coherent waves into incoherent counterparts. The cornerstone of our progress lies in a coherence theory-based theoretical framework, pivotal for designing and validating the THz diffuser, and systematically evaluating speckle phenomena. Our experimental results utilizing DaISy reveal substantial improvements in imaging quality and nearly diffraction-limited spatial resolution. Moreover, we demonstrate a tangible application of DaISy in the scenario of security scanning, highlighting the versatile potential of sub-THz waves in miscellaneous fields.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Chemical Transferability and Accuracy of Ionic Liquid Simulations with Machine Learning Interatomic Potentials
Authors:
Zachary A. H. Goodwin,
Malia B. Wenny,
Julia H. Yang,
Andrea Cepellotti,
Kyle Bystrom,
Blake R. Duschatko,
Anders Johansson,
Lixin Sun,
Simon Batzner,
Albert Musaelian,
Jarad A. Mason,
Boris Kozinsky,
Nicola Molinari
Abstract:
Ionic liquids (ILs) are an exciting class of electrolytes finding applications in many areas from energy storage to solvents, and have been touted as ``designer solvents'', as they can be mixed to precisely tailor the physiochemical properties. As using machine learning interatomic potentials (MLIPs) to simulate ILs is still relatively unexplored, several questions need to be answered to see if ML…
▽ More
Ionic liquids (ILs) are an exciting class of electrolytes finding applications in many areas from energy storage to solvents, and have been touted as ``designer solvents'', as they can be mixed to precisely tailor the physiochemical properties. As using machine learning interatomic potentials (MLIPs) to simulate ILs is still relatively unexplored, several questions need to be answered to see if MLIPs can be transformative for ILs. Since ILs are often not pure, but are either mixed together or contain additives, we first demonstrate that a MLIP can be trained to be chemically transferable, i.e., can be applied to compositions not directly train on, but with similar chemistries, whilst only being trained on a few compositions. We also investigate the accuracy of MLIPs for a novel IL, which we experimentally synthesis and characterise. Our MLIP trained on $\sim$200 DFT frames is in reasonable agreement with our experiments and good agreement against DFT, demonstrating the data-efficient power of this method.
△ Less
Submitted 27 May, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Formation and manipulation of diatomic rotors at the symmetry-breaking surfaces of kagome superconductors
Authors:
Zihao Huang,
Xianghe Han,
Zhen Zhao,
Haitao Yang,
Hui Chen,
Hong-Jun Gao
Abstract:
Artificial molecular rotors and motors hold great promise for functional nanomachines, but constructing diatomic rotors, crucial for these machines, is challenging due to surface constraints and limited chemical design. Here we report the construction of diatomic Cr-Cs and Fe-Cs rotors where a Cr or Fe atom revolves around a Cs atom at the Sb surface of the newly-discovered kagome superconductor C…
▽ More
Artificial molecular rotors and motors hold great promise for functional nanomachines, but constructing diatomic rotors, crucial for these machines, is challenging due to surface constraints and limited chemical design. Here we report the construction of diatomic Cr-Cs and Fe-Cs rotors where a Cr or Fe atom revolves around a Cs atom at the Sb surface of the newly-discovered kagome superconductor CsV3Sb5. The rotation rate is controlled by bias voltage between the rotor and scanning tunneling microscope (STM) tip. The spatial distribution of rates exhibits C2 symmetry, might linked to the symmetry-breaking charge orders of CsV3Sb5. We have expanded rotor construction to include different transition metals (Cr, Fe, V) and alkali metals (Cs, K). Remarkably, designed configurations of rotors are achieved through STM manipulation. Rotor orbits and quantum states are precisely controlled by tunning inter-rotor distance. Our findings establish a novel platform for the atomically precise fabrication of atomic motors on symmetry-breaking quantum materials, paving the way for advanced nanoscale devices.
△ Less
Submitted 18 February, 2024;
originally announced February 2024.
-
Vector spectrometer with Hertz-level resolution and super-recognition capability
Authors:
Ting Qing,
Shupeng Li,
Huashan Yang,
Lihan Wang,
Yijie Fang,
Xiaohu Tang,
Meihui Cao,
Jianming Lu,
Jijun He,
Junqiu Liu,
Yueguang Lyu,
Shilong Pan
Abstract:
High-resolution optical spectrometers are crucial in revealing intricate characteristics of signals, determining laser frequencies, measuring physical constants, identifying substances, and advancing biosensing applications. Conventional spectrometers, however, often grapple with inherent trade-offs among spectral resolution, wavelength range, and accuracy. Furthermore, even at high resolution, re…
▽ More
High-resolution optical spectrometers are crucial in revealing intricate characteristics of signals, determining laser frequencies, measuring physical constants, identifying substances, and advancing biosensing applications. Conventional spectrometers, however, often grapple with inherent trade-offs among spectral resolution, wavelength range, and accuracy. Furthermore, even at high resolution, resolving overlapping spectral lines during spectroscopic analyses remains a huge challenge. Here, we propose a vector spectrometer with ultrahigh resolution, combining broadband optical frequency hopping, ultrafine microwave-photonic scanning, and vector detection. A programmable frequency-hopping laser was developed, facilitating a sub-Hz linewidth and Hz-level frequency stability, an improvement of four and six orders of magnitude, respectively, compared to those of state-of-the-art tunable lasers. We also designed an asymmetric optical transmitter and receiver to eliminate measurement errors arising from modulation nonlinearity and multi-channel crosstalk. The resultant vector spectrometer exhibits an unprecedented frequency resolution of 2 Hz, surpassing the state-of-the-art by four orders of magnitude, over a 33-nm range. Through high-resolution vector analysis, we observed that group delay information enhances the separation capability of overlapping spectral lines by over 47%, significantly streamlining the real-time identification of diverse substances. Our technique fills the gap in optical spectrometers with resolutions below 10 kHz and enables vector measurement to embrace revolution in functionality.
△ Less
Submitted 6 March, 2024; v1 submitted 15 February, 2024;
originally announced February 2024.
-
Learning Dynamics from Multicellular Graphs with Deep Neural Networks
Authors:
Haiqian Yang,
Florian Meyer,
Shaoxun Huang,
Liu Yang,
Cristiana Lungu,
Monilola A. Olayioye,
Markus J. Buehler,
Ming Guo
Abstract:
Multicellular self-assembly into functional structures is a dynamic process that is critical in the development and diseases, including embryo development, organ formation, tumor invasion, and others. Being able to infer collective cell migratory dynamics from their static configuration is valuable for both understanding and predicting these complex processes. However, the identification of struct…
▽ More
Multicellular self-assembly into functional structures is a dynamic process that is critical in the development and diseases, including embryo development, organ formation, tumor invasion, and others. Being able to infer collective cell migratory dynamics from their static configuration is valuable for both understanding and predicting these complex processes. However, the identification of structural features that can indicate multicellular motion has been difficult, and existing metrics largely rely on physical instincts. Here we show that using a graph neural network (GNN), the motion of multicellular collectives can be inferred from a static snapshot of cell positions, in both experimental and synthetic datasets.
△ Less
Submitted 8 July, 2024; v1 submitted 22 January, 2024;
originally announced January 2024.
-
Detonation attenuation and quenching in hydrogen mixtures after the interaction with cylinders
Authors:
Hongxia Yang,
Wentian Wang,
Farzane Zangane,
Kevin Cheevers,
Logan Maley,
Matei Radulescu
Abstract:
The attenuation and quenching of H$_2$/O$_2$ detonations transmitted across a column of cylinders were studied experimentally and analytically at sub-atmospheric pressures. Two distinct transmission regimes were observed: successful transmission and complete quenching. The transition between the two regimes was found to correlate with the ratio of inter-cylinder separation distance (b) to a charac…
▽ More
The attenuation and quenching of H$_2$/O$_2$ detonations transmitted across a column of cylinders were studied experimentally and analytically at sub-atmospheric pressures. Two distinct transmission regimes were observed: successful transmission and complete quenching. The transition between the two regimes was found to correlate with the ratio of inter-cylinder separation distance (b) to a characteristic detonation scale for large blockage ratios (BRs), with critical limits comparable with those previously reported for detonation diffraction from slots. Based on available cell size measurements, the critical transmission limit was $b/λ=4.5\pm3$. The proposed theoretical model based on Whitham's geometric shock dynamics confirmed the equivalence between the detonation diffraction at abrupt area changes and around cylinders with large BRs. Complete quenching observed experimentally was accounted for by the weak transmitted shock strength upon detonation failure. For the tested BRs, the transmitted shock speed ranged between 50% and 60% of the Chapman-Jouguet detonation speed. As a result, the post-shock temperatures fell below the cross-over regime for hydrogen ignition, leading to very long ignition delay times ($t_i$) despite the temperature rise induced by Mach reflection. The long $t_i$ suppressed auto-ignition, while the high isentropic exponent prevented further convective mixing required for re-initiation. This explained the fundamental difference between arresting hydrogen and hydrocarbon detonations, for which transmitted fast flames punctuated by auto-ignition events were always observed. The transmitted shock strength was found to be well-predicted by our previous self-similar multiple discontinuity gas-dynamic model. Over a very narrow range near the critical conditions, both hot spot re-ignition and detonation re-initiation from Mach shock reflections were observed.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
An Equation-Free Based Data-Driven Coupling Approach for Prediction of Long-term Cryogenic Propellent Tank Behaviors Combining CFD and Nodal Modeling Techniques
Authors:
Qiyun Cheng,
Huihua Yang,
Shanbin Shi,
Mamoru Ishii,
Wei Ji
Abstract:
The design and optimization of cryogenic propellant storage tanks for NASA's future space missions require fast and accurate long-term fluid behavior simulations. CFD codes offer high fidelity but face prohibitive computational costs, whereas nodal codes are oversimplified and inadequate in scenarios involving prominent three-dimensional phenomenon, such as thermal stratification. Hence, an equati…
▽ More
The design and optimization of cryogenic propellant storage tanks for NASA's future space missions require fast and accurate long-term fluid behavior simulations. CFD codes offer high fidelity but face prohibitive computational costs, whereas nodal codes are oversimplified and inadequate in scenarios involving prominent three-dimensional phenomenon, such as thermal stratification. Hence, an equation-free based data-driven coupling (EFD) approach is developed to couple CFD and nodal codes for efficient and accurate integrated analysis. The EFD approach, as a concurrent coupling scheme, modifies the equation-free modeling and adapted the data-driven approaches. It utilizes the CFD simulation results within a short co-solved period to generate equation-free correlations through the data-driven approach. The nodal code then solves the problem with the obtained correlations, producing "CFD-like" solutions. This paper implements the EFD approach using the ANSYS Fluent and the CRTech SINDA/FLUINT to investigate two-phase cryogenic tank self-pressurization and periodic mixing problems. The EFD approach diminishes the stratified temperature predictions errors in the top region by 89.1% and 98.9%, reducing computational time by 70% and 52%, respectively. The EFD minimizes the risks of numerical instability and inherent correlation loss compared to previous coupling methods, making it a flexible and easy-to-apply approach for CFD and nodal code integrated analysis.
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
Finite Expression Method for Learning Dynamics on Complex Networks
Authors:
Zezheng Song,
Chunmei Wang,
Haizhao Yang
Abstract:
Complex network data pervades various real-world domains, including physical, technological, and biological systems. Despite the prevalence of such data, predicting trends and understanding behavioral patterns in complex systems remains challenging due to poorly understood underlying mechanisms. While data-driven methods have made strides in uncovering governing equations from time series data, ef…
▽ More
Complex network data pervades various real-world domains, including physical, technological, and biological systems. Despite the prevalence of such data, predicting trends and understanding behavioral patterns in complex systems remains challenging due to poorly understood underlying mechanisms. While data-driven methods have made strides in uncovering governing equations from time series data, efforts to extract physical laws from network data are limited and often struggle with incomplete or noisy data. To address these challenges, we introduce a novel approach called the Finite Expression Method (FEX) and its fast algorithm for this learning problem on complex networks. FEX represents dynamics on complex networks using binary trees composed of finite mathematical operators. The nodes within these trees are trained through a combinatorial optimization process guided by reinforcement learning techniques. This unique configuration allows FEX to capture complex dynamics with minimal prior knowledge of the system and a small dictionary of mathematical operators. Our extensive numerical experiments demonstrate that FEX excels in accurately identifying dynamics across diverse network topologies and dynamic behaviors.
△ Less
Submitted 12 February, 2024; v1 submitted 5 January, 2024;
originally announced January 2024.
-
Towards End-to-End Structure Solutions from Information-Compromised Diffraction Data via Generative Deep Learning
Authors:
Gabe Guo,
Judah Goldfeder,
Ling Lan,
Aniv Ray,
Albert Hanming Yang,
Boyuan Chen,
Simon JL Billinge,
Hod Lipson
Abstract:
The revolution in materials in the past century was built on a knowledge of the atomic arrangements and the structure-property relationship. The sine qua non for obtaining quantitative structural information is single crystal crystallography. However, increasingly we need to solve structures in cases where the information content in our input signal is significantly degraded, for example, due to o…
▽ More
The revolution in materials in the past century was built on a knowledge of the atomic arrangements and the structure-property relationship. The sine qua non for obtaining quantitative structural information is single crystal crystallography. However, increasingly we need to solve structures in cases where the information content in our input signal is significantly degraded, for example, due to orientational averaging of grains, finite size effects due to nanostructure, and mixed signals due to sample heterogeneity. Understanding the structure property relationships in such situations is, if anything, more important and insightful, yet we do not have robust approaches for accomplishing it. In principle, machine learning (ML) and deep learning (DL) are promising approaches since they augment information in the degraded input signal with prior knowledge learned from large databases of already known structures. Here we present a novel ML approach, a variational query-based multi-branch deep neural network that has the promise to be a robust but general tool to address this problem end-to-end. We demonstrate the approach on computed powder x-ray diffraction (PXRD), along with partial chemical composition information, as input. We choose as a structural representation a modified electron density we call the Cartesian mapped electron density (CMED), that straightforwardly allows our ML model to learn material structures across different chemistries, symmetries and crystal systems. When evaluated on theoretically simulated data for the cubic and trigonal crystal systems, the system achieves up to $93.4\%$ average similarity with the ground truth on unseen materials, both with known and partially-known chemical composition information, showing great promise for successful structure solution even from degraded and incomplete input data.
△ Less
Submitted 22 December, 2023;
originally announced December 2023.
-
Real-Space Visualization of Frequency-Dependent Anisotropy of Atomic Vibrations
Authors:
Xingxu Yan,
Paul M. Zeiger,
Yifeng Huang,
Haoying Sun,
Jie Li,
Chaitanya A. Gadre,
Hongbin Yang,
Ri He,
Toshihiro Aoki,
Zhicheng Zhong,
Yuefeng Nie,
Ruqian Wu,
Ján Rusz,
Xiaoqing Pan
Abstract:
The underlying dielectric properties of materials, intertwined with intriguing phenomena such as topological polariton modes and anisotropic thermal conductivities, stem from the anisotropy in atomic vibrations. Conventionally, X-ray diffraction techniques have been employed to estimate thermal ellipsoids of distinct elements, albeit lacking the desired spatial and energy resolutions. Here we intr…
▽ More
The underlying dielectric properties of materials, intertwined with intriguing phenomena such as topological polariton modes and anisotropic thermal conductivities, stem from the anisotropy in atomic vibrations. Conventionally, X-ray diffraction techniques have been employed to estimate thermal ellipsoids of distinct elements, albeit lacking the desired spatial and energy resolutions. Here we introduce a novel approach utilizing the dark-field monochromated electron energy-loss spectroscopy for momentum-selective vibrational spectroscopy, enabling the cartographic delineation of variations of phonon polarization vectors. By applying this technique to centrosymmetric cubic-phase strontium titanate, we successfully discern two types of oxygen atoms exhibiting contrasting vibrational anisotropies below and above 60 meV due to their frequency-linked thermal ellipsoids. This method establishes a new pathway to visualize phonon eigenvectors at specific crystalline sites for diverse elements, thus delving into uncharted realms of dielectric, optical, and thermal property investigations with unprecedented spatial resolutions.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
Simulation study of intra-beam scattering effect in the HALF storage ring with Piwinski model
Authors:
C. W. Luo,
P. H. Yang,
G. W. Liu,
W. W. Li,
N. Hu,
W. M. Li,
Z. H. Bai,
L. Wang
Abstract:
The Hefei Advanced Light Facility (HALF) will be a VUV and soft X-ray diffraction-limited storage ring (DLSR), and its high density of electron bunches makes the intra-beam scattering (IBS) effect very serious. In this paper, an IBS module used in the IMPACT code is developed, where the scattering process of IBS is described by the Piwinski model in Monte Carlo sampling. For benchmarking, the IMPA…
▽ More
The Hefei Advanced Light Facility (HALF) will be a VUV and soft X-ray diffraction-limited storage ring (DLSR), and its high density of electron bunches makes the intra-beam scattering (IBS) effect very serious. In this paper, an IBS module used in the IMPACT code is developed, where the scattering process of IBS is described by the Piwinski model in Monte Carlo sampling. For benchmarking, the IMPACT code with IBS module is compared with the ELEGANT code and a semi-analytic code using Bane's model. Then, the results of IBS effect in the HALF storage ring studied by this new code are presented. With various countermeasures, the IBS impact can be controlled to a certain extent, and the expected beam emittance is approximately 59 pm.rad.
△ Less
Submitted 26 November, 2023;
originally announced November 2023.
-
On-chip light-scattering enhancement enables high performance single-particle tracking under conventional bright-field microscope
Authors:
Pengcheng Zhang,
Tingting Zhan,
Guoqiang Gu,
Changle Li,
Mengting Lyu,
Yi Zhang,
Hui Yang
Abstract:
Scattering-based single-particle tracking (S-SPT) has opened new avenues for highly sensitive label-free detection and characterization of nanoscopic objects, making it particularly attractive for various analytical applications. However, a long-standing issue hindering its widespread applicability is its high technical demands on optical systems. The most promising solution entails implementing o…
▽ More
Scattering-based single-particle tracking (S-SPT) has opened new avenues for highly sensitive label-free detection and characterization of nanoscopic objects, making it particularly attractive for various analytical applications. However, a long-standing issue hindering its widespread applicability is its high technical demands on optical systems. The most promising solution entails implementing on-chip light-scattering enhancement, but the existing field-enhancement technology fails as their highly localized field is insufficient to cover the three-dimensional trajectory of particles within the interrogation time. Here, we present a straightforward and robust on-chip microlens-based strategy for light-scattering enhancement, providing an enhancement range ten times greater than that of near-field optical techniques. These properties are attributed to the increased long-range optical fields and complex composite interactions between two closely spaced structures. Thanks to this strategy, we demonstrate that high-performance S-SPT can be achieved, for the first time, under a conventional bright-field microscope with illumination powers over 1,000 times lower than typically required. This significantly reduces the technical demands of S-SPT, representing a significant step forward in facilitating its practical application in biophotonics, biosensors, diagnostics, and other fields.
△ Less
Submitted 19 November, 2023;
originally announced November 2023.
-
Overcoming the Size Limit of First Principles Molecular Dynamics Simulations with an In-Distribution Substructure Embedding Active Learner
Authors:
Lingyu Kong,
Jielan Li,
Lixin Sun,
Han Yang,
Hongxia Hao,
Chi Chen,
Nongnuch Artrith,
Jose Antonio Garrido Torres,
Ziheng Lu,
Yichi Zhou
Abstract:
Large-scale first principles molecular dynamics are crucial for simulating complex processes in chemical, biomedical, and materials sciences. However, the unfavorable time complexity with respect to system sizes leads to prohibitive computational costs when the simulation contains over a few hundred atoms in practice. We present an In-Distribution substructure Embedding Active Learner (IDEAL) to e…
▽ More
Large-scale first principles molecular dynamics are crucial for simulating complex processes in chemical, biomedical, and materials sciences. However, the unfavorable time complexity with respect to system sizes leads to prohibitive computational costs when the simulation contains over a few hundred atoms in practice. We present an In-Distribution substructure Embedding Active Learner (IDEAL) to enable efficient simulation of large complex systems with quantum accuracy by maintaining a machine learning force field (MLFF) as an accurate surrogate to the first principles methods. By extracting high-uncertainty substructures into low-uncertainty atom environments, the active learner is allowed to concentrate on and learn from small substructures of interest rather than carrying out intractable quantum chemical computations on large structures. IDEAL is benchmarked on various systems and shows sub-linear complexity, accelerating the simulation thousands of times compared with conventional active learning and millions of times compared with pure first principles simulations. To demonstrate the capability of IDEAL in practical applications, we simulated a polycrystalline lithium system composed of one million atoms and the full ammonia formation process in a Haber-Bosch reaction on a 3-nm Iridium nanoparticle catalyst on a computing node comprising one single A100 GPU and 24 CPU cores.
△ Less
Submitted 14 November, 2023; v1 submitted 14 November, 2023;
originally announced November 2023.
-
Preliminary Design of Scalable Hardware Integrated Platform for LLRF Application
Authors:
Lin Jiang,
Jingjun Wen,
Tao Xue,
Xiaowei Guo,
Haoyan Yang,
Qiutong Pan,
Jianmin Li,
Yinong Liu,
Liangjun Wei
Abstract:
In this paper, the SHIP4LLRF (Scalable Hardware Integrated Platform for LLRF) based on 6U VPX-standard was designed preliminarily, which includes 6U mother board and two HPC FPGA mezzanine cards (FMCs). The ADC and DAC FMC is based on ADS54J60 from TI and LTC2000Y-16 form ADI, respectively. The system mother board is based on Xilinx Kintex UltraScale KU060, which also features 64-bit DDR4 SDRAM, Q…
▽ More
In this paper, the SHIP4LLRF (Scalable Hardware Integrated Platform for LLRF) based on 6U VPX-standard was designed preliminarily, which includes 6U mother board and two HPC FPGA mezzanine cards (FMCs). The ADC and DAC FMC is based on ADS54J60 from TI and LTC2000Y-16 form ADI, respectively. The system mother board is based on Xilinx Kintex UltraScale KU060, which also features 64-bit DDR4 SDRAM, QSFP and USB3.0 interfaces. Each FMC connector is assigned 58 pairs of LVDS standard IOs and 8 pairs of GTH high-speed serial lanes. Besides, the mother board is equipped with the self-developed ZYNQBee2 module based on ZYNQ7010 for slow control such as EPICS. All ADC or DAC raw data in each SHIP4LLEF is compressed loss-less without triggering and transmitted to the process board. A scalar quantization method which is in development is used for lossless compression of ADC raw data, the process board will decompress the ADC data and perform a digital algorithm to measure the amplitude and phase of the high frequency signal. This de-sign is scalable for testing and upgradability, mean-while, the trigger-less data transmission enable this system participate in both local (rack-scale) and accelerator-wide communication networks.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
A Design of Hadronic Calorimeter for DarkSHINE Experiment
Authors:
Zhen Wang,
Rui Yuan,
Hanqing Liu,
Xiang Chen,
Shu Li,
Kun Liu,
Qibin Liu,
Siyuan Song,
Tong Sun,
Yufeng Wang,
Haijun Yang,
Junhua Zhang,
Yulei Zhang,
Zhiyu Zhao,
Chunxiang Zhu,
Xuliang Zhu,
Yifan Zhu
Abstract:
The sensitivity of the dark photon search through invisible decay final states in low background experiments significantly relies on the neutron and muon veto efficiency, which depends on the amount of material used and the design of detector geometry. This paper presents an optimized design of a hadronic calorimeter (HCAL) used for the DarkSHINE experiment, which is studied using a GEANT4-based s…
▽ More
The sensitivity of the dark photon search through invisible decay final states in low background experiments significantly relies on the neutron and muon veto efficiency, which depends on the amount of material used and the design of detector geometry. This paper presents an optimized design of a hadronic calorimeter (HCAL) used for the DarkSHINE experiment, which is studied using a GEANT4-based simulation framework. The geometry is optimized by comparing a traditional design with uniform absorbers to one that uses different thicknesses at different locations of the detector, which enhances the efficiency of vetoing low-energy neutrons at the sub-GeV level. The overall size and total amount of material used in HCAL are optimized to be lower due to the load and budget requirements, while the overall performance is studied to meet the physical objectives.
△ Less
Submitted 8 May, 2024; v1 submitted 3 November, 2023;
originally announced November 2023.
-
Suppressed terahertz dynamics of water confined in nanometer gaps
Authors:
Hyosim Yang,
Gangseon Ji,
Min Choi,
Seondo Park,
Hyeonjun An,
Hyoung-Taek Lee,
Joonwoo Jeong,
Yun Daniel Park,
Kyungwan Kim,
Noejung Park,
Jeeyoon Jeong,
Dai-Sik Kim,
Hyeong-Ryeol Park
Abstract:
Nanoconfined waters have been extensively studied within various systems, demonstrating low permittivity under static conditions; however, their dynamics have been largely unexplored due to the lack of a robust platform, particularly in the terahertz (THz) regime where hydrogen bond dynamics occur. We report the THz complex refractive index of nanoconfined water within metal gaps ranging in width…
▽ More
Nanoconfined waters have been extensively studied within various systems, demonstrating low permittivity under static conditions; however, their dynamics have been largely unexplored due to the lack of a robust platform, particularly in the terahertz (THz) regime where hydrogen bond dynamics occur. We report the THz complex refractive index of nanoconfined water within metal gaps ranging in width from 2 to 20 nanometers, spanning mostly interfacial waters all the way to quasi-bulk waters. These loop nanogaps, encasing water molecules, sharply enhance light-matter interactions, enabling precise measurements of refractive index, both real and imaginary parts, of nanometer-thick layers of water. Under extreme confinement, the suppressed dynamics of the long-range correlation of hydrogen bond networks corresponding to the THz frequency regime result in a significant reduction in the terahertz permittivity of even 'non-interfacial' water. This platform provides valuable insights into the long-range collective dynamics of water molecules which is crucial to understanding water-mediated processes such as protein folding, lipid rafts, and molecular recognition.
△ Less
Submitted 4 November, 2023; v1 submitted 29 October, 2023;
originally announced October 2023.
-
Study of residual artificial neural network for particle identification in the CEPC high-granularity calorimeter prototype
Authors:
Siyuan Song,
Jiyuan Chen,
Jianbei Liu,
Yong Liu,
Baohua Qi,
Yukun Shi,
Jiaxuan Wang,
Zhen Wang,
Haijun Yang
Abstract:
Particle Identification (PID) plays a central role in associating the energy depositions in calorimeter cells with the type of primary particle in a particle flow oriented detector system. In this paper, we propose novel PID methods based on the Residual Network (ResNet) architecture which enable the training of very deep networks, bypass the need to reconstruct feature variables, and ensure the g…
▽ More
Particle Identification (PID) plays a central role in associating the energy depositions in calorimeter cells with the type of primary particle in a particle flow oriented detector system. In this paper, we propose novel PID methods based on the Residual Network (ResNet) architecture which enable the training of very deep networks, bypass the need to reconstruct feature variables, and ensure the generalization ability among various geometries of detectors, to classify electromagnetic showers and hadronic showers. Using Geant4 simulation samples with energy ranging from 5 GeV to 120 GeV, the efficacy of Residual Connections is validated and the performance of our model is compared with Boosted Decision Trees (BDT) and other pioneering Artificial Neural Network (ANN) approaches. In shower classification, we observe an improvement in background rejection over a wide range of high signal efficiency ($> 95\%$). These findings highlight the prospects of ANN with Residual Blocks for imaging detectors in the PID task of particle physics experiments.
△ Less
Submitted 9 March, 2024; v1 submitted 14 October, 2023;
originally announced October 2023.
-
Unidirectional Photonic Reflector Using a Defective Atomic Lattice
Authors:
Tianming Li,
Hong Yang,
Maohua Wang,
Chengping Yin,
Tinggui Zhang,
Yan Zhang
Abstract:
Based on the broken spatial symmetry, we propose a novel scheme for engineering a unidirectional photonic reflector using a one-dimensional atomic lattice with defective cells that have been specifically designed to be vacant. By trapping three-level atoms and driving them into the regime of electromagnetically induced transparency, and through the skillful design of the number and position of vac…
▽ More
Based on the broken spatial symmetry, we propose a novel scheme for engineering a unidirectional photonic reflector using a one-dimensional atomic lattice with defective cells that have been specifically designed to be vacant. By trapping three-level atoms and driving them into the regime of electromagnetically induced transparency, and through the skillful design of the number and position of vacant cells in the lattice, numerical simulations demonstrate that a broad and high unidirectional reflection region can be realized within EIT window. This proposed unidirectional reflector scheme provides a new platform for achieving optical nonreciprocity and has potential applications for designing optical circuits and devices of nonreciprocity at extremely low energy levels.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Microstructure and structural modulation of lutetium dihydride LuH2 as seen via transmission electron microscopy
Authors:
Xiao-Ping Ma,
Ning-Ning Wang,
Wen-Tao Wang,
Jing-Zhe Nie,
Wen-Li Gao,
Shuai-Shuai Sun,
Jun Li,
Huan-Fang Tian,
Tian-Long Xia,
Jin-Guang Cheng,
Jian-Qi Li,
Huai-Xin Yang
Abstract:
Structural investigations conducted using transmission electron microscopy (TEM) on LuH2 synthesized under atmospheric pressure (AP-LuH2) and nitrogen-doped LuH2 synthesized under high pressure (HP-LuH2) have revealed numerous microstructural phenomena. Both materials show a clear superstructure modulation with wave vector, q^* = 1/4 (2-20), and this modulation can be well interpreted by the displ…
▽ More
Structural investigations conducted using transmission electron microscopy (TEM) on LuH2 synthesized under atmospheric pressure (AP-LuH2) and nitrogen-doped LuH2 synthesized under high pressure (HP-LuH2) have revealed numerous microstructural phenomena. Both materials show a clear superstructure modulation with wave vector, q^* = 1/4 (2-20), and this modulation can be well interpreted by the displacements of Lu atoms. Further investigations on the nitrogen-doped HP-LuH2 materials reveal the appearance of high-density antiphase boundaries, in particular, domain walls of a few atomic layer thickness without structural modulation can be observed, suggesting possible interface properties could be detected in this system. In-situ TEM observations of AP-LuH2 suggest that no evident structural phase transition occurs between 94 K and 673 K.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
The trigger system for the CSR external-target experiment
Authors:
Dong Guo,
Haoqian Xyu,
DongDong Qi,
HeXiang Wang,
Lei Zhang,
Zhengyang Sun,
Zhi Qin,
Botan Wang,
Yingjie Zhou,
Zekun Wang,
Yuansheng Yang,
Yuhao Qin,
Xianglun Wei,
Herun Yang,
Yuhong Yu,
Lei Zhao,
Zhigang Xiao
Abstract:
A trigger system has been designed and implemented for the HIRFL-CSR external target experiment (CEE), the spectrometer for studying nuclear matter properties with heavy ion collisions in the GeV energy region. The system adopts master-slave structure and serial data transmission mode using optical fiber to deal with different types of detectors and long-distance signal transmission. The trigger l…
▽ More
A trigger system has been designed and implemented for the HIRFL-CSR external target experiment (CEE), the spectrometer for studying nuclear matter properties with heavy ion collisions in the GeV energy region. The system adopts master-slave structure and serial data transmission mode using optical fiber to deal with different types of detectors and long-distance signal transmission. The trigger logic can be accessed based on command register and controlled by a remote computer. The overall field programmable gate array (FPGA) logic can be flexibly reconfigured online to match the physical requirements of the experiment. The trigger system has been tested in beam experiment. It is demonstrated that the trigger system functions correctly and meets the physical requirements of CEE.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Finite-temperature ductility-brittleness and electronic structures of Al$_{n}$Sc (n=1, 2 and 3)
Authors:
Xue-Qian Wang,
Ying Zhao,
Hao-Xuan Liu,
Shuchen Sun,
Hongbo Yang,
Jiamin Zhong,
Ganfeng Tu,
Song Li,
Hai-Le Yan,
Liang Zuo
Abstract:
Finite-temperature ductility-brittleness and electronic structures of Al$_3$Sc, Al$_2$Sc and AlSc are studied comparatively by first-principles calculations and ab-initio molecular dynamics. Results show that Al$_3$Sc and Al$_2$Sc are inherently brittle at both ground state and finite temperatures. By contrast, AlSc possesses a significantly superior ductility evaluated from all Pugh's, Pettifor's…
▽ More
Finite-temperature ductility-brittleness and electronic structures of Al$_3$Sc, Al$_2$Sc and AlSc are studied comparatively by first-principles calculations and ab-initio molecular dynamics. Results show that Al$_3$Sc and Al$_2$Sc are inherently brittle at both ground state and finite temperatures. By contrast, AlSc possesses a significantly superior ductility evaluated from all Pugh's, Pettifor's and Poisson's ductility-brittleness criteria. At ground state, AlSc meets the criteria of ductile according to Pugh's and Poisson's theories, while it is categorized as the brittle in the frame of Pettifor's picture. With the increasing temperature, the ductility of all the studied compounds exhibits a noticeable improvement. In particular, as the temperature rises, the Cauchy pressure of AlSc undergoes a transition from negative to positive. Thus, at high temperatures (T > 600 K), AlSc is unequivocally classified as the ductile from all criteria considered. In all Al$_3$Sc, Al$_2$Sc and AlSc, the Al-Al bond, originated from s-p and p-p orbital hybridizations, and the Al-Sc bond, dominated by p-d covalent hybridization, are the first and second strongest chemical bonds, respectively. To explain the difference in mechanical properties of the studied compounds, the mean bond strength (MBS) is evaluated. The weaker Al-Al bond in AlSc, leading to a smaller MBS, could be the origin for the softer elastic stiffness and superior intrinsic ductility. The longer length of the Al-Al bond in AlSc is responsible for its weaker bond strength. Furthermore, the enhanced metallicity of the Al-Al bond in AlSc would also contribute to its exceptional ductility.
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Liquid Metal Molecular Scissors
Authors:
Liangfei Duan,
Tong Zhou,
Huiqin Yang,
Weihua Mu,
Zhongshan Deng,
Jing Liu,
Qingju Liu
Abstract:
Molecules are the smallest unit in matters that can exist independently, relatively stable, and maintain physical and chemical activities. The atomic species, alignment commands, and chemical bonds are key factors to dominate their structures and properties. Here we disclosed a general chemistry effect that the liquid metals can directly cut off oxygen-containing groups in various molecular matter…
▽ More
Molecules are the smallest unit in matters that can exist independently, relatively stable, and maintain physical and chemical activities. The atomic species, alignment commands, and chemical bonds are key factors to dominate their structures and properties. Here we disclosed a general chemistry effect that the liquid metals can directly cut off oxygen-containing groups in various molecular matters at room temperature, and then recombine the remaining groups to form functional materials including nano semiconductors. Based on this unique mechanism, we proposed a basic tool and named it as liquid metal scissors for molecular directional clipping and functional transformation. As proof-of-concept, we demonstrated the capabilities of eGaIn scissors made of Ga and In particles, and revealed that the Ga on the surface of eGaIn could directly snatch oxygen atoms from various targeted substances such as H2O, CO2 or CH3OH molecules to form gallium oxides. As illustration, after clipping, the remaining hydrogen atoms of H2O molecules recombined to form H2, while the remaining groups of CH3OH lead to H2, carbon quantum dots, and other related substances. If needed, more molecules can also be manipulated via such scissors. This finding refreshes the basic knowledge of chemistry and suggests easygoing ways for molecular weaving, which may break up the limitations and single features of molecular substances. It also opens up a universal route for innovating future molecular chemical engineering, life science, energy and environment, and biomedicine.
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Observation of photoassociation resonances in ultracold atom-molecule collisions
Authors:
Jin Cao,
Bo-Yuan Wang,
Huan Yang,
Zhi-Jie Fan,
Zhen Su,
Jun Rui,
Bo Zhao,
Jian-Wei Pan
Abstract:
Photoassociation of ultracold atoms is a resonant light-assisted collision process, in which two colliding atoms absorb a photon and form an excited molecule. Since the first observation about three decades ago, the photoassociation of ultracold atoms has made a significant impact on the study of ultracold atoms and molecules. Extending the photoassociation of atoms to the photoassociation of atom…
▽ More
Photoassociation of ultracold atoms is a resonant light-assisted collision process, in which two colliding atoms absorb a photon and form an excited molecule. Since the first observation about three decades ago, the photoassociation of ultracold atoms has made a significant impact on the study of ultracold atoms and molecules. Extending the photoassociation of atoms to the photoassociation of atom-molecule pairs or molecule-molecule pairs will offer many new opportunities in the study of precision polyatomic molecular spectroscopy, formation of ultracold polyatomic molecules, and quantum control of molecular collisions and reactions. However, the high density of states and the photoexcitation of the collision complex by the trapping laser make photoassociation into well-defined quantum states of polyatomic molecules extremely difficult. Here we report on the observation of photoassociation resonances in ultracold collisions between $^{23}$Na$^{40}$K molecules and $^{40}$K atoms. We perform photoassociation in a long-wavelength optical dipole trap to form deeply bound triatomic molecules in the electronically excited states. The atom-molecule Feshbach resonance is used to enhance the free-bound Franck-Condon overlap. The photoassociation into well-defined quantum states of excited triatomic molecules is identified by observing resonantly enhanced loss features. These loss features depend on the polarization of the photoassociation lasers, allowing us to assign the rotational quantum numbers. The observation of ultracold atom-molecule photoassociation resonances paves the way toward preparing ground-state triatomic molecules, provides a new high-resolution spectroscopy technique for polyatomic molecules, and is also important to atom-molecule Feshbach resonances.
△ Less
Submitted 29 July, 2023;
originally announced July 2023.
-
Nonlinear optical diode effect in a magnetic Weyl semimetal
Authors:
Christian Tzschaschel,
Jian-Xiang Qiu,
Xue-Jian Gao,
Hou-Chen Li,
Chunyu Guo,
Hung-Yu Yang,
Cheng-Ping Zhang,
Ying-Ming Xie,
Yu-Fei Liu,
Anyuan Gao,
Damien Bérubé,
Thao Dinh,
Sheng-Chin Ho,
Yuqiang Fang,
Fuqiang Huang,
Johanna Nordlander,
Qiong Ma,
Fazel Tafti,
Philip J. W. Moll,
Kam Tuen Law,
Su-Yang Xu
Abstract:
Diode effects are of great interest for both fundamental physics and modern technologies. Electrical diode effects (nonreciprocal transport) have been observed in Weyl systems. Optical diode effects arising from the Weyl fermions have been theoretically considered but not probed experimentally. Here, we report the observation of a nonlinear optical diode effect (NODE) in the magnetic Weyl semimeta…
▽ More
Diode effects are of great interest for both fundamental physics and modern technologies. Electrical diode effects (nonreciprocal transport) have been observed in Weyl systems. Optical diode effects arising from the Weyl fermions have been theoretically considered but not probed experimentally. Here, we report the observation of a nonlinear optical diode effect (NODE) in the magnetic Weyl semimetal CeAlSi, where the magnetization introduces a pronounced directionality in the nonlinear optical second-harmonic generation (SHG). We show demonstrate a six-fold change of the measured SHG intensity between opposite propagation directions over a bandwidth exceeding 250 meV. Supported by density-functional theory, we establish the linearly dispersive bands emerging from Weyl nodes as the origin of this broadband effect. We further demonstrate current-induced magnetization switching and thus electrical control of the NODE. Our results advance ongoing research to identify novel nonlinear optical/transport phenomena in magnetic topological materials and further opens new pathways for the unidirectional manipulation of light.
△ Less
Submitted 8 April, 2024; v1 submitted 28 July, 2023;
originally announced July 2023.
-
Spatial-Temporal Data Mining for Ocean Science: Data, Methodologies, and Opportunities
Authors:
Hanchen Yang,
Wengen Li,
Shuyu Wang,
Hui Li,
Jihong Guan,
Shuigeng Zhou,
Jiannong Cao
Abstract:
With the rapid amassing of spatial-temporal (ST) ocean data, many spatial-temporal data mining (STDM) studies have been conducted to address various oceanic issues, including climate forecasting and disaster warning. Compared with typical ST data (e.g., traffic data), ST ocean data is more complicated but with unique characteristics, e.g., diverse regionality and high sparsity. These characteristi…
▽ More
With the rapid amassing of spatial-temporal (ST) ocean data, many spatial-temporal data mining (STDM) studies have been conducted to address various oceanic issues, including climate forecasting and disaster warning. Compared with typical ST data (e.g., traffic data), ST ocean data is more complicated but with unique characteristics, e.g., diverse regionality and high sparsity. These characteristics make it difficult to design and train STDM models on ST ocean data. To the best of our knowledge, a comprehensive survey of existing studies remains missing in the literature, which hinders not only computer scientists from identifying the research issues in ocean data mining but also ocean scientists to apply advanced STDM techniques. In this paper, we provide a comprehensive survey of existing STDM studies for ocean science. Concretely, we first review the widely-used ST ocean datasets and highlight their unique characteristics. Then, typical ST ocean data quality enhancement techniques are explored. Next, we classify existing STDM studies in ocean science into four types of tasks, i.e., prediction, event detection, pattern mining, and anomaly detection, and elaborate on the techniques for these tasks. Finally, promising research opportunities are discussed. This survey can help scientists from both computer science and ocean science better understand the fundamental concepts, key techniques, and open challenges of STDM for ocean science.
△ Less
Submitted 3 August, 2023; v1 submitted 20 July, 2023;
originally announced July 2023.
-
Theoretical Study of High Performance Germanium Nanowire Quantum Dot
Authors:
Han-Wei Yang,
Yung-Feng Wu,
Ming-Jung Hsu,
Shao-Chen Lee,
Ying-Tsan Tang
Abstract:
In this report, we demonstrate that Ge-NWQD (nanowire quantum dots) at low temperatures exhibit apparent Coulomb oscillations than that in Si-NWQD. These oscillations gradually disappear as the temperature increases, indicating the influence of phonon scattering. The increase in Coulomb oscillations enables the device to exhibit multi-level characteristics at low voltage in quantum flash, and the…
▽ More
In this report, we demonstrate that Ge-NWQD (nanowire quantum dots) at low temperatures exhibit apparent Coulomb oscillations than that in Si-NWQD. These oscillations gradually disappear as the temperature increases, indicating the influence of phonon scattering. The increase in Coulomb oscillations enables the device to exhibit multi-level characteristics at low voltage in quantum flash, and the lower barrier high and high mobility of Ge make it advantageous for increasing the storage capacity of quantum flash devices. This research provides design guidelines for optimization of high-performance quantum flash devices.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
-
Hierarchical Interpolative Factorization for Self Green's Function in 3D Modified Poisson-Boltzmann Equations
Authors:
Yihui Tu,
Zhenli Xu,
Haizhao Yang
Abstract:
The modified Poisson-Boltzmann (MPB) equations are often used to describe equilibrium particle distribution of ionic systems. In this paper, we propose a fast algorithm to solve MPB equations with the self Green's function as the self energy in three dimensions, where the solution of the self Green's function poses a computational bottleneck due to the need to solve a high-dimensional partial diff…
▽ More
The modified Poisson-Boltzmann (MPB) equations are often used to describe equilibrium particle distribution of ionic systems. In this paper, we propose a fast algorithm to solve MPB equations with the self Green's function as the self energy in three dimensions, where the solution of the self Green's function poses a computational bottleneck due to the need to solve a high-dimensional partial differential equation. Our algorithm combines the selected inversion with hierarchical interpolative factorization for the self Green's function by extending our previous result of two dimensions. This leads to an $O(N\log N)$ algorithm through the strategical utilization of locality and low-rank characteristics of the corresponding operators. Furthermore, the estimated $O(N)$ complexity is obtained by applying cubic edge skeletonization at each level for thorough dimensionality reduction. Extensive numerical results are performed to demonstrate the accuracy and efficiency of the proposed algorithm for problems in three dimensions.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
Self-enhanced coherent harmonic amplification in seeded free-electron lasers
Authors:
Hanxiang Yang,
Jiawei Yan,
Haixiao Deng
Abstract:
High-intensity, ultrashort, fully coherent X-ray pulses hold great potential for advancing spectroscopic techniques to unprecedented levels. Here, we propose a novel scheme for generating high-brightness and femtosecond-scale soft X-ray radiation within a seeded free-electron laser (FEL) operating at an MHz repetition rate. This scheme relies on the principles of self-modulation and superradiance.…
▽ More
High-intensity, ultrashort, fully coherent X-ray pulses hold great potential for advancing spectroscopic techniques to unprecedented levels. Here, we propose a novel scheme for generating high-brightness and femtosecond-scale soft X-ray radiation within a seeded free-electron laser (FEL) operating at an MHz repetition rate. This scheme relies on the principles of self-modulation and superradiance. A relatively weak energy modulation of the pre-bunched electron beam is significantly amplified by the coherent radiation emitted in the self-modulator. Consequently, a coherent signal at ultra-high harmonics of the seed is achieved, and this signal is further amplified in the subsequent radiator through the fresh bunch and superradiant processes. Based on the parameters of the Shanghai soft X-ray FEL facility, three-dimensional simulations have been performed. The simulation results demonstrate that an electron beam with a laser-induced energy modulation as small as 2.3 times the slice energy spread can generate ultrashort coherent radiation pulses of around 2 GW within the water window spectral range. Moreover, the experimental results demonstrate that self-enhanced coherent energy modulation enables the production of coherent signals up to the 15th harmonic of a 266-nm seed laser. These findings indicate that the proposed scheme can facilitate the generation of high-repetition-rate seeded FEL.
△ Less
Submitted 29 June, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Towards Sustainable Ultrawide Bandgap Van der Waals Materials: An ab initio Screening Effort
Authors:
Chuin Wei Tan,
Linqiang Xu,
Chen Chen Er,
Siang-Piao Chai,
Boris Kozinsky,
Hui Ying Yang,
Shengyuan A. Yang,
Jing Lu,
Yee Sin Ang
Abstract:
The sustainable development of next-generation device technology is paramount in the face of climate change and the looming energy crisis. Tremendous efforts have been made in the discovery and design of nanomaterials that achieve device-level sustainability, where high performance and low operational energy cost are prioritized. However, many of such materials are composed of elements that are un…
▽ More
The sustainable development of next-generation device technology is paramount in the face of climate change and the looming energy crisis. Tremendous efforts have been made in the discovery and design of nanomaterials that achieve device-level sustainability, where high performance and low operational energy cost are prioritized. However, many of such materials are composed of elements that are under threat of depletion and pose elevated risks to the environment. The role of material-level sustainability in computational screening efforts remains an open question thus far. Here we develop a general van der Waals materials screening framework imbued with sustainability-motivated search criteria. Using ultrawide bandgap (UWBG) materials as a backdrop -- an emerging materials class with great prospects in dielectric, power electronics, and ultraviolet device applications, we demonstrate how this screening framework results in 25 sustainable UWBG layered materials comprising only of low-risks elements. Our findings constitute a critical first-step towards reinventing a more sustainable electronics landscape beyond silicon, with the framework established in this work serving as a harbinger of sustainable 2D materials discovery.
△ Less
Submitted 25 October, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Energy-efficient superparamagnetic Ising machine and its application to traveling salesman problems
Authors:
Jia Si,
Shuhan Yang,
Yunuo Cen,
Jiaer Chen,
Zhaoyang Yao,
Dong-Jun Kim,
Kaiming Cai,
Jerald Yoo,
Xuanyao Fong,
Hyunsoo Yang
Abstract:
The growth of artificial intelligence and IoT has created a significant computational load for solving non-deterministic polynomial-time (NP)-hard problems, which are difficult to solve using conventional computers. The Ising computer, based on the Ising model and annealing process, has been highly sought for finding approximate solutions to NP-hard problems by observing the convergence of dynamic…
▽ More
The growth of artificial intelligence and IoT has created a significant computational load for solving non-deterministic polynomial-time (NP)-hard problems, which are difficult to solve using conventional computers. The Ising computer, based on the Ising model and annealing process, has been highly sought for finding approximate solutions to NP-hard problems by observing the convergence of dynamic spin states. However, it faces several challenges, including high power consumption due to artificial spins and randomness emulated by complex circuits, as well as low scalability caused by the rapidly growing connectivity when considering large-scale problems. Here, we present an experimental Ising annealing computer based on superparamagnetic tunnel junctions (SMTJs) with all-to-all connections, which successfully solves a 70-city travelling salesman problem (4761-node Ising problem). By taking advantage of the intrinsic randomness of SMTJs, implementing a proper global annealing scheme, and using an efficient algorithm, our SMTJ-based Ising annealer shows superior performance in terms of power consumption and energy efficiency compared to other Ising schemes. Additionally, our approach provides a promising way to solve complex problems with limited hardware resources. Moreover, we propose a crossbar array architecture for scalable integration using conventional magnetic random access memories. Our results demonstrate that the SMTJ-based Ising annealing computer with high energy efficiency, speed, and scalability is a strong candidate for future unconventional computing schemes.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
An interpenetrating-network theory of cytoplasm
Authors:
Haiqian Yang,
Thomas Henzel,
Eric M. Stewart,
Lallit Anand,
Ming Guo
Abstract:
Under many physiological and pathological conditions such as division and migration, cells undergo dramatic deformations, under which their mechanical integrity is supported by cytoskeletal networks (i.e. intermediate filaments, F-actin, and microtubules). Recent observations of cytoplasmic microstructure indicate interpenetration among different cytoskeletal networks, and micromechanical experime…
▽ More
Under many physiological and pathological conditions such as division and migration, cells undergo dramatic deformations, under which their mechanical integrity is supported by cytoskeletal networks (i.e. intermediate filaments, F-actin, and microtubules). Recent observations of cytoplasmic microstructure indicate interpenetration among different cytoskeletal networks, and micromechanical experiments have shown evidence of complex characteristics in the mechanical response of the interpenetrating cytoplasmic networks of living cells, including viscoelastic, nonlinear stiffening, microdamage, and healing characteristics. However, a theoretical framework describing such a response is missing, and thus it is not clear how different cytoskeletal networks with distinct mechanical properties come together to build the overall complex mechanical features of cytoplasm. In this work, we address this gap by developing a finite-deformation continuum-mechanical theory with a multi-branch visco-hyperelastic constitutive relation coupled with phase-field damage and healing. The proposed interpenetrating-network model elucidates the coupling among interpenetrating cytoskeletal components, and the roles of finite elasticity, viscoelastic relaxation, damage, and healing in the experimentally-observed mechanical response of interpenetrating-network eukaryotic cytoplasm.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.