Format-preserving encryption: Difference between revisions
Chris Mounce (talk | contribs) Undoing vandalism by Afshinhl: section was deleted without explanation on 23 April 2014. Edits between then and now have been preserved. |
mNo edit summary |
||
Line 109: | Line 109: | ||
Section 8 of the [[Federal Information Processing Standard|FIPS]] 74, ''Federal Information Processing Standards Publication 1981 Guidelines for Implementing and Using the NBS Data Encryption Standard'',<ref>FIPS 74, Federal Information Processing Standards Publication 1981 Guidelines for Implementing and Using the NBS Data Encryption Standard http://www.itl.nist.gov/fipspubs/fip74.htm</ref> describes a way to use the DES encryption algorithm in a manner that preserves the format of the data via modulo-n addition followed by an unbiasing operation. This standard was withdrawn on May 19, 2005, so the technique should be considered obsolete in terms of being a formal standard. |
Section 8 of the [[Federal Information Processing Standard|FIPS]] 74, ''Federal Information Processing Standards Publication 1981 Guidelines for Implementing and Using the NBS Data Encryption Standard'',<ref>FIPS 74, Federal Information Processing Standards Publication 1981 Guidelines for Implementing and Using the NBS Data Encryption Standard http://www.itl.nist.gov/fipspubs/fip74.htm</ref> describes a way to use the DES encryption algorithm in a manner that preserves the format of the data via modulo-n addition followed by an unbiasing operation. This standard was withdrawn on May 19, 2005, so the technique should be considered obsolete in terms of being a formal standard. |
||
Two mechanisms for format-preserving encryption of JPEG2000 were given in the paper "Efficient and Secure Encryption Schemes for JPEG2000" <ref>Hongjun Wu, Di Ma, "Efficient and Secure Encryption Schemes for JPEG2000", International Conference on Acoustics, Speech, and Signal Processing (ICASSP 2004). MSP-L 1.6, Vol. V, pp. 869-872. http://www3.ntu.edu.sg/home/wuhj/research/publications/2004_ICASSP_JPEG2000.pdf </ref> by Hongjun Wu and Di Ma. In JPEG2000 standard, the marker coedes (in the range 0xFF90 through 0xFFFF) should not appear in the plaintext and ciphertext. The simple modular-0xFF90 technique cannot be applied to solve the JPEG2000 encryption problem. For example, the ciphertext words 0x03FF and 0x9832 are valid, but their combination 0x03FF9832 becomes invalid since it introduces the marker code 0xFF98. Similarly, the simple cycle-walking technique cannot be applied to solve the JPEG2000 encryption problem since two valid ciphertext blocks may give invalid ciphertext when they are adjacent. For example, if the first ciphertext block ends with byte ".3FFF" and the second ciphertext block starts with byte "9832....", then the marker code "0xFF98" would appear in the ciphertext. To perform format-preserving encryption of JPEG2000, the technique is to exclude the byte "0xFF" in the encryption and decryption. Then an JPEG2000 encryption mechanism performs modulo-n addition with stream cipher; another JPEG2000 encryption mechanism performs the cycle-walking technique with block cipher. |
|||
Another early mechanism for format-preserving encryption was [[Peter Gutmann (computer scientist)|Peter Gutmann]]s "Encrypting data with a restricted range of values"<ref>Peter Gutmann, "Encrypting data with a restricted range of values", 23 January 1997, http://groups.google.com/group/sci.crypt/browse_thread/thread/6caf26496782e359/e576d7196b6cdb48</ref> which again performs modulo-n addition on any cipher with some adjustments to make the result uniform, with the resulting encryption being as strong as the underlying encryption algorithm that it is based on. |
Another early mechanism for format-preserving encryption was [[Peter Gutmann (computer scientist)|Peter Gutmann]]s "Encrypting data with a restricted range of values"<ref>Peter Gutmann, "Encrypting data with a restricted range of values", 23 January 1997, http://groups.google.com/group/sci.crypt/browse_thread/thread/6caf26496782e359/e576d7196b6cdb48</ref> which again performs modulo-n addition on any cipher with some adjustments to make the result uniform, with the resulting encryption being as strong as the underlying encryption algorithm that it is based on. |
Revision as of 09:07, 18 November 2014
In cryptography, format-preserving encryption (FPE) refers to encrypting in such a way that the output (the ciphertext) is in the same format as the input (the plaintext). The meaning of "format" varies. Typically only finite domains are discussed, for example:
- To encrypt a 16-digit credit card number so that the ciphertext is another 16-digit number.
- To encrypt an English word so that the ciphertext is another English word.
- To encrypt an n-bit number so that the ciphertext is another n-bit number. (That's actually the definition of an n-bit block cipher.)
For such finite domains, and for the purposes of the discussion below, the cipher is equivalent to a permutation of N integers {0, ... , N−1} where N is the size of the domain.
The motivation for FPE
Restricted field lengths or formats
One motivation for using FPE comes from the problems associated with integrating encryption into existing applications, with well-defined data models. A typical example would be a credit card number, such as 1234567812345670
(16 bytes long, digits only).
Adding encryption to such applications might be challenging if data models are to be changed, as it usually involves changing field length limits or data types. For example, output from a typical block cipher would turn credit card number into a hexadecimal (e.g.0x96a45cbcf9c2a9425cde9e274948cb67
, 34 bytes, hexadecimal digits) or Base64 value (e.g. lqRcvPnCqUJc3p4nSUjLZw==
, 24 bytes, alphanumeric and special characters), which will break any existing applications expecting the credit card number to be a 16-digit number.
Apart from simple formatting problems, using AES-128-CBC, this credit card number might get encrypted to the hexadecimal value 0xde015724b081ea7003de4593d792fd8b695b39e095c98f3a220ff43522a2df02
. In addition to the problems caused by creating invalid characters and increasing the size of the data, data encrypted using the CBC mode of an encryption algorithm also changes its value when it is decrypted and encrypted again. This happens because the random seed value that is used to initialize the encryption algorithm and is included as part of the encrypted value is different for each encryption operation. Because of this, it is impossible to use data that has been encrypted with the CBC mode as a unique key to identify a row in a database.
FPE attempts to simplify the transition process by preserving the formatting and length of the original data, allowing a drop-in replacement of plaintext values with their cryptograms in legacy applications.
Generating pseudorandom numbers
Format Preserving Encryption (FPE) is capable of generating unique and inimitable numbers. The main purpose of FPE is to encrypt a file in such a way that both the original and transformed file should be in same format. So if a sequence of numbers starting from 11111 to 88888 is created, then FPE takes the first value which is 11111 and encrypts this into a different five digit number. This process continues until the input reads the last value which is 88888. All the encrypted values are unique and random. These numbers are used as a serial key for a product.
Comparison to truly random permutations
Although a truly random permutation is the ideal FPE cipher, for large domains it is infeasible to pre-generate and remember a truly random permutation. So the problem of FPE is to generate a pseudorandom permutation from a secret key, in such a way that the computation time for a single value is small (ideally constant, but most importantly smaller than O(N)).
Comparison to block ciphers
An n-bit block cipher (such as AES) technically is a FPE on the set {0, ..., 2n-1}. If you need an FPE on one of these standard sized sets (where n=128, 192, 256) you may as well use a block cipher of the right size.
However, in typical usage, a block cipher is used in a mode of operation that allows it to encrypt arbitrarily long messages, and with an initialization vector as discussed above. In this mode, a block cipher is not a FPE.
Definition of security for FPE's
In cryptographic literature (see most of the references below), the measure of a "good" FPE is whether an attacker can distinguish the FPE from a truly random permutation. Various types of attackers are postulated, depending on whether they have access to oracles or known ciphertext/plaintext pairs.
FPE algorithms
In most of the approaches listed here, a well-understood block cipher (such as AES) is used as a primitive to take the place of an ideal random function. This has the advantage that incorporation of a secret key into the algorithm is easy. Where AES is mentioned in the following discussion, any other good block cipher would work as well.
The FPE constructions of Black and Rogaway
Implementing FPE with security provably related to that of the underlying block cipher was first undertaken in a paper by cryptographers John Black and Phillip Rogaway,[1] which described three ways to do this. They proved that each of these techniques is as secure as the block cipher that is used to construct it. This means that if the AES algorithm is used to create an FPE algorithm, then the resulting FPE algorithm is as secure as AES because an adversary capable of defeating the FPE algorithm can also defeat the AES algorithm. So if we assume that AES is secure, then the FPE algorithms constructed from it are also secure. In all of the following, we use E to denote the AES encryption operation that is used to construct an FPE algorithm and F to denote the FPE encryption operation.
FPE from a prefix cipher
One simple way to create an FPE algorithm on {0,...,N-1} is to assign a pseudorandom weight to each integer, then sort by weight. The weights are defined by applying an existing block cipher to each integer. Black and Rogaway call this technique a "prefix cipher" and showed it was provably as good as the block cipher used.
Thus, to create a FPE on the domain {0,1,2,3}, given a key K apply AES(K) to each integer, giving, for example,
weight(0) = 0x56c644080098fc5570f2b329323dbf62
weight(1) = 0x08ee98c0d05e3dad3eb3d6236f23e7b7
weight(2) = 0x47d2e1bf72264fa01fb274465e56ba20
weight(3) = 0x077de40941c93774857961a8a772650d
Sorting [0,1,2,3] by weight gives [3,1,2,0], so your cipher is
F(0) = 3
F(1) = 1
F(2) = 2
F(3) = 0
.
This method is only useful for small values of N. For larger values, the size of the lookup table and the required number of encryptions to initialize the table gets too big to be practical.
FPE from cycle walking
If we have a set M of allowed values within the domain of a pseudorandom permutation P (for example P can be a block cipher like AES), we can create an FPE algorithm from the block cipher by repeatedly applying the block cipher until the result is one of the allowed values (within M).
CycleWalkingFPE(x)
{
if P(x) is an element of M
return P(x)
else
return CycleWalkingFPE(P(x))
}
The recursion is guaranteed to terminate. (Because P is one-to-one and the domain is finite, repeated application of P forms a cycle, so starting with a point in M the cycle will eventually terminate in M.)
This has the advantage that you don't have to map the elements of M to a consecutive sequence {0,...,N-1} of integers. It has the disadvantage, when M is much smaller than P's domain, that too many iterations might be required for each operation. If P is a block cipher of a fixed size, such as AES, this is a severe restriction on the sizes of M for which this method is efficient.
For example, suppose that we want to encrypt 100-bit values with AES in a way that creates another 100-bit value. With this technique, apply AES-128-ECB encryption until it reaches a value which has all of its 28 highest bits set to 0, which will take an average of 228 iterations to happen.
FPE from a Feistel network
It is also possible to make a FPE algorithm using a Feistel network. A Feistel network needs a source of pseudo-random values for the sub-keys for each round, and the output of the AES algorithm can be used as these pseudo-random values. When this is done, the resulting Feistel construction is good if enough rounds are used.[2]
One way to implement an FPE algorithm using AES and a Feistel network is to use as many bits of AES output as are needed to equal the length of the left or right halves of the Feistel network. If a 24-bit value is needed as a sub-key, for example, it is possible to use the lowest 24 bits of the output of AES for this value.
This may not result in the output of the Feistel network preserving the format of the input, but it is possible to iterate the Feistel network in the same way that the cycle-walking technique does to ensure that format can be preserved. Because it is possible to adjust the size of the inputs to a Feistel network, it is possible to make it very likely that this iteration ends very quickly on average. In the case of credit card numbers, for example, there are 1016 possible 16-digit credit card numbers, and because the 1016 = 253.1, using a 54-bit wide Feistel network along with cycle walking will create an FPE algorithm that encrypts fairly quickly on average.
The Thorp shuffle
A Thorp shuffle is like an idealized card-shuffle, or equivalently a maximally-unbalanced Feistel cipher where one side is a single bit. It is easier to prove security for unbalanced Feistel ciphers than for balanced ones.[3]
VIL mode
For domain sizes that are a power of two, and an existing block cipher with a smaller block size, a new cipher may be created using VIL mode as described by Bellare, Rogaway.[4]
Hasty Pudding Cipher
The Hasty Pudding Cipher uses custom constructions (not depending on existing block ciphers as primitives) to encrypt arbitrary finite small domains.
The FFSEM/FFX mode of AES
The FFSEM mode of AES (specification[5]) that has been accepted for consideration by NIST uses the Feistel network construction of Black and Rogaway described above, with AES for the round function, with one slight modification: a single key is used and is tweaked slightly for each round.
As of February 2010, FFSEM has been superseded by the FFX mode written by Mihir Bellare, Phillip Rogaway, and Terence Spies. (specification,[6] NIST Block Cipher Modes Development, 2010).
Other FPE constructions
Several FPE constructs are based on adding the output of a standard cipher, modulo n, to the data to be encrypted, with various methods of unbiasing the result. The modulo-n addition shared by many of the constructs is the immediately obvious solution to the FPE problem (thus its use in a number of cases), with the main differences being the unbiasing mechanisms used.
Section 8 of the FIPS 74, Federal Information Processing Standards Publication 1981 Guidelines for Implementing and Using the NBS Data Encryption Standard,[7] describes a way to use the DES encryption algorithm in a manner that preserves the format of the data via modulo-n addition followed by an unbiasing operation. This standard was withdrawn on May 19, 2005, so the technique should be considered obsolete in terms of being a formal standard.
Two mechanisms for format-preserving encryption of JPEG2000 were given in the paper "Efficient and Secure Encryption Schemes for JPEG2000" [8] by Hongjun Wu and Di Ma. In JPEG2000 standard, the marker coedes (in the range 0xFF90 through 0xFFFF) should not appear in the plaintext and ciphertext. The simple modular-0xFF90 technique cannot be applied to solve the JPEG2000 encryption problem. For example, the ciphertext words 0x03FF and 0x9832 are valid, but their combination 0x03FF9832 becomes invalid since it introduces the marker code 0xFF98. Similarly, the simple cycle-walking technique cannot be applied to solve the JPEG2000 encryption problem since two valid ciphertext blocks may give invalid ciphertext when they are adjacent. For example, if the first ciphertext block ends with byte ".3FFF" and the second ciphertext block starts with byte "9832....", then the marker code "0xFF98" would appear in the ciphertext. To perform format-preserving encryption of JPEG2000, the technique is to exclude the byte "0xFF" in the encryption and decryption. Then an JPEG2000 encryption mechanism performs modulo-n addition with stream cipher; another JPEG2000 encryption mechanism performs the cycle-walking technique with block cipher.
Another early mechanism for format-preserving encryption was Peter Gutmanns "Encrypting data with a restricted range of values"[9] which again performs modulo-n addition on any cipher with some adjustments to make the result uniform, with the resulting encryption being as strong as the underlying encryption algorithm that it is based on.
The paper "Using Datatype-Preserving Encryption to Enhance Data Warehouse Security"[10] by Michael Brightwell and Harry Smith describes a way to use the DES encryption algorithm in a way that preserves the format of the plaintext. This technique doesn't appear to apply an unbiasing step as do the other modulo-n techniques referenced here.
The paper "Format-Preserving Encryption"[11] by Mihir Bellare and Thomas Ristenpart describes using "nearly balanced" Feistel networks to create secure FPE algorithms.
The paper "Format Controlling Encryption Using Datatype Preserving Encryption"[12] by Ulf Mattsson describes other ways to create FPE algorithms.
An example of FPE algorithm is FNR (Flexible Naor and Reingold).[13]
Acceptance of FPE algorithms by standards authorities
An approach based on one of these techniques has been accepted[14] by NIST for consideration as an approved mode of the AES algorithm under the name "The FFX Mode of Operation for Format-Preserving Encryption" (defined in [6]). FFX is a proposed mode of AES specified in NIST 800-38G. FFX mode is also in standards processes under ANSI X9 as X9.119 and X9.124. VISA has also issued guidance on the use of Format Preserving Encryption in Data Field Encryption Version 1.0 (PDF).
References
- ^ John Black and Philip Rogaway, Ciphers with Arbitrary Domains, Proceedings RSA-CT, 2002, pp. 114–130. http://citeseer.ist.psu.edu/old/black00ciphers.html (http://www.cs.ucdavis.edu/~rogaway/papers/subset.pdf)
- ^ Jacques Patarin, Luby-Rackoff: 7 Rounds Are Enough for 2n(1-epsilon) Security, Proceedings of CRYPTO 2003, Lecture Notes in Computer Science, Volume 2729, Oct 2003, pp. 513–529. http://www.iacr.org/archive/crypto2003/27290510/27290510.pdf; also Jaques Patrin: Security of Random Feistel Schemes with 5 or more Rounds. http://www.iacr.org/archive/crypto2004/31520105/Version%20courte%20Format%20Springer.pdf
- ^ Rogaway, Phillip (2009), "How to Encipher Messages on a Small Domain" (PDF), Advances in Cryptology
- ^ Bellare, Mihir (1999), On the construction of Variable-Input-Length Ciphers (PDF)
- ^ Terence Spies, Feistel Finite Set Encryption Mode http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/ffsem/ffsem-spec.pdf
- ^ a b Mihir Bellare, Phillip Rogaway, Terence Spies: The FFX Mode of Operation for Format-Preserving Encryption http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/ffx/ffx-spec.pdf
- ^ FIPS 74, Federal Information Processing Standards Publication 1981 Guidelines for Implementing and Using the NBS Data Encryption Standard http://www.itl.nist.gov/fipspubs/fip74.htm
- ^ Hongjun Wu, Di Ma, "Efficient and Secure Encryption Schemes for JPEG2000", International Conference on Acoustics, Speech, and Signal Processing (ICASSP 2004). MSP-L 1.6, Vol. V, pp. 869-872. http://www3.ntu.edu.sg/home/wuhj/research/publications/2004_ICASSP_JPEG2000.pdf
- ^ Peter Gutmann, "Encrypting data with a restricted range of values", 23 January 1997, http://groups.google.com/group/sci.crypt/browse_thread/thread/6caf26496782e359/e576d7196b6cdb48
- ^ Michael Brightwell and Harry Smith, "Using Datatype-Preserving Encryption to Enhance Data Warehouse Security, Proceedings of the 1997 National Information Systems Security Conference https://portfolio.du.edu/portfolio/getportfoliofile?uid=135556
- ^ Mihir Bellare and Thomas Ristenpart, Format-Preserving Encryption http://eprint.iacr.org/2009/251
- ^ Ulf Mattsson, Format Controlling Encryption Using Datatype Preserving Encryption http://eprint.iacr.org/2009/257
- ^ Sashank Dara, Scott Fluhrer. "Flexible Naor and Reingold". Cisco Systems Inc.
- ^ NIST Block Cipher Modes Development