(Translated by https://www.hiragana.jp/)
MS-DOS 7 - Wikipedia Jump to content

MS-DOS 7

From Wikipedia, the free encyclopedia
(Redirected from MS-DOS 7.1)

MS-DOS 7
MS-DOS 7.0 command.com runs in a Windows console on Windows 95.
DeveloperMicrosoft
Written inx86 assembly
OS familyMS-DOS, Windows 9x
Source modelClosed source
Initial release1995; 29 years ago (1995)
Final release7.1 / 1999; 25 years ago (1999)
Update methodRe-installation
Package managerNone
Platformsx86
Kernel typeMonolithic
Default
user interface
Command-line interface (COMMAND.COM)
LicenseProprietary
Preceded byMS-DOS 6
Succeeded byMS-DOS 8[1]
Support status
Unsupported as of July 11, 2006[2]

MS-DOS 7 is a real mode operating system for IBM PC compatibles. Unlike earlier versions of MS-DOS, it was not released separately by Microsoft,[3] but included in the Windows 9x family of operating systems.[4] Windows 95 RTM reports it as MS-DOS 7.0,[5] and Windows 95 OSR 2.x and Windows 98 report as 7.1.[5] The real-mode MS-DOS 7.x is contained in the IO.SYS file.[6]

Announcement

[edit]

After the release of MS-DOS 6, Microsoft preannounced in 1994 that MS-DOS 7 would incorporate multitasking and a few other new features planned for the upcoming Windows 4.0, codenamed Chicago. IBM also promised a "fancy", multitasking PC DOS 7.[7] Continuing what Computerworld called a "vaporware tornado", Microsoft also projected this revised combination of Windows and MS-DOS to require a low-end computer with only 4 MB of RAM.[8] Windows 4.0 was released branded as Windows 95, and Microsoft canceled the standalone version of MS-DOS 7 and instead included it with Windows 95.[9] The proposed multitasking and multithreading technology was canceled from MS-DOS 7.0.[citation needed]

New features

[edit]

MS-DOS 7.0 adds support for long filename (LFN) using the VFAT file system,[10] whereas earlier versions do not show long filenames even with a driver such as DOSLFN. It supports larger extended memory (up to 4GB) via its HIMEM.SYS driver. Various smaller improvements include enhanced DOS commands, more efficient use of UMB memory (COMMAND.COM and part of the DOS kernel are loaded high automatically), and using environment variables directly in the DOS command.

MS-DOS 7.1 adds FAT32 support[11] for larger than 2GB and up to 2TB per volume,[12] and MS-DOS 7.0 and earlier versions of MS-DOS only support FAT12 and FAT16.[13] Logical block addressing (LBA) is supported in MS-DOS 7 for accessing larger hard disks, unlike earlier versions which only supported cylinder-head-sector (CHS)-based addressing. Unlike MS-DOS 7.0, MS-DOS 7.1 recognizes a hard disk beyond the first 8.4GB.[14] Year 2000 support was added to DIR command via the new /4 option.

MS-DOS 7.x adds support for running the graphical interface of Windows 9x,[10] which cannot be run on older MS-DOS releases. Even though VER command usually shows the Windows version, the MS-DOS version is also officially mentioned in other places. For example, Windows 95 OSR2 or Windows 98's VMM32.VXD file (renamed to VMM32.EXE) cannot be run directly on an earlier version of MS-DOS, or it will prompt the user to upgrade MS-DOS to version 7.1 or higher. In the case of Windows 95 RTM, the version number 7.0 is displayed in place of 7.1.

Overview

[edit]

According to Caldera which sold DR-DOS, Windows 95 is not one integrated software product, but rather a combination of two products, MS-DOS 7.0 and Windows 4.0, packaged together to look as a single product. Though MS-DOS 7.0 and Windows 4.0 could be readily segregated and marketed as different products, Microsoft stopped marketing Windows and MS-DOS separately with the release of Windows 95.[15]

A major difference from earlier versions of MS-DOS is the usage of the MSDOS.SYS file.[16] In MS-DOS 7, this is not a binary file, but a pure setting file. The older boot style, where Windows is not automatically started and the system boots into a DOS command shell, can use that same style by setting BootGUI=0 in the MSDOS.SYS file. Otherwise, since Windows 95, it will automatically start up on boot. However this is only an automatic call for the command WIN.COM, the Windows starting program. Windows 95 and 98 are dependent on MS-DOS to boot the 32-bit kernel and to run legacy 16-bit MS-DOS device drivers.[17] MS-DOS progressed as the base operating system of Windows 3.1x and Windows 9x. Windows 95 is on MS-DOS 7.0, and Windows 95 OSR2 and Windows 98 are on MS-DOS 7.1.[18] By default, MS-DOS 7.0 is installed with Windows 95 to the C:\WINDOWS\COMMAND subdirectory, and is loaded prior to the loading of the GUI system. More importantly, the DOS system, which handles files and disk partitioning, manages the disk storage system.[10] Moreover, while IO.SYS is the kernel file of MS-DOS 7, JO.SYS is an alternate filename for IO.SYS that is used for "specific purposes" in MS-DOS 7. JO.SYS supports booting from a CD-ROM drive or a hard disk.[14]

Reception

[edit]

At Microsoft's 1994 preannouncement, the stripped down Windows 4.0 with MS-DOS 7 was expected to be "at the expense of Windows NT" as the biggest competitor of the much more featureful and resource-consuming Windows NT.[8]

See also

[edit]

References

[edit]
  1. ^ Franken, Gerhard (2003). DOS ge-packt (in German). mitp-Verlag. p. 178. ISBN 978-3826613135.
  2. ^ "Obsolete Products Life-Cycle Policy". Support. Microsoft. July 30, 2009. Archived from the original on July 6, 2006. Retrieved April 6, 2010.
  3. ^ Information about MS-DOS 7.0
  4. ^ "Name That DOS". DOS World. Vol. 25. 1996 [1996-01]. p. 4. Retrieved January 10, 2023.
  5. ^ a b Cooper, Jim (2002). Using MS-DOS 6.22. Que Publishing. p. 583. ISBN 9780789725738.
  6. ^ O'Reilly, Tim; Mott, Troy; Glenn, Walter J. (1999). Windows 98 in a Nutshell – A Desktop Quick Reference. O'Reilly. p. 525. ISBN 978-1565924864.
  7. ^ Dvorak, John C. (September 13, 1994). "DOS is Alive, and, Well..." PCMag. Ziff Davis, Inc. p. 93. Retrieved November 8, 2023.
  8. ^ a b Lindquist, Christopher (April 9, 1993). "Windows success could limit NT". Computerworld. IDG Enterprise. p. 2. Retrieved November 8, 2023.
  9. ^ Kirshna's Computers and Languages. Krishna Prakashan. p. 109.
  10. ^ a b c Malicious Mobile Code: Virus Protection for Windows. O'Reilly Media. 2001. p. 76.
  11. ^ Essential Computer and it Fundamentals for Engineering And S. S. Chand Publishing. p. 252. ISBN 9788121940474.
  12. ^ The Unauthorized Guide to Windows 98. Que. 1999. p. 337. ISBN 9780789719126.
  13. ^ Scene of the Cybercrime. Elsevier Science. p. 160. ISBN 9780080486994.
  14. ^ a b "MS DOS Operating System". Academia. Retrieved November 8, 2023.
  15. ^ Antitrust Law Journal, Volume 68. Resource Systems Institute, East West Center. p. 1044.
  16. ^ MsDos 7.0 from Windows 95/98
  17. ^ "What was the role of MS-DOS in Windows 95?". The Old New Thing. December 24, 2007. Retrieved June 6, 2021.
  18. ^ The Complete Guide to Windows Server 2008. Pearson Education. 2008. p. 30.

Further reading

[edit]
  • Kantaris, Noel; Oliver, Phil (1998). Windows 98 Explained. Bernard Babani Publishing. ISBN 978-0859344562.
  • Brown, Bruce; Kratofil, Bruce; Smith, Nigel R. M. (1995). The Windows 95 Bug Collection. Addison-Wesley Longman. ISBN 978-0201489958.
  • Sammes, A. J.; Sammes, Tony; Jenkinson, Brian (2000). Forensic Computing – A Practitioner's Guide. Springer. ISBN 978-1852332990.