(Translated by https://www.hiragana.jp/)
Norton Model 99 Dominator - Wikipedia Jump to content

Norton Model 99 Dominator

From Wikipedia, the free encyclopedia

Norton Model 99 Dominator
1956 99 Dominator
ManufacturerNorton
Production1956-1962
AssemblyBracebridge St, Birmingham
SuccessorNorton 650SS
Engine597 cc (36.4 cu in) air-cooled OHV vertical twin
Bore / stroke68 mm × 82 mm (2.7 in × 3.2 in)
Power31 bhp (23 kW) @ 5,750 rpm (88)
44 bhp (33 kW) @ 6,750 rpm (88SS)
TransmissionWet clutch, 4-speed, chain drive
Frame typeFeatherbed duplex cradle
SuspensionFront: telescopic forks
Rear: swinging arm
Brakesdrum front & rear
Wheelbase55.5 in (1,410 mm)
Weight390 lb (180 kg) (dry)
410 lb (190 kg) (wet)
Footnotes / references
[1][2][3]

The Norton Model 99 Dominator was a 600 cc vertical twin motorcycle manufactured by the British Norton Motorcycle Company at their Bracebridge St, Birmingham factory from 1956 to 1962. The 99 was based on the 500 cc Model 88 Dominator with an enlarged engine. The model was superseded by the 650SS.

Background

[edit]

Norton had first started exporting to the US in 1949. The Americans were impressed with Norton's racing successes but wanted a twin that was capable of the 'ton' 100 mph (160 km/h). The 88 Dominator was only capable of 90 mph (140 km/h) and was no match for the 650 Triumph Thunderbird and BSA Golden Flash.[2] Norton needed more power for the American market.[4]

Bert Hopwood had designed the 500 cc vertical twin that powered the 88.[2] Hopwood had left Norton and moved to BSA where he redesigned Val Page's earlier twin to produce the 650 cc Golden Flash.[5] Hopwood was back at Norton in 1955 and enlarged his twin engine to 600 cc to produce more power.[2]

Technical details

[edit]

Engine and transmission

[edit]

The 597 cc engine was enlarged from the 88's 500 cc engine by increasing the bore and stroke from 66 mm (2.6 in) x 72.6 mm (2.86 in) to 68 mm (2.7 in) x 82 mm (3.2 in).[3] The pre-unit 360° pushrod vertical twin used cast iron cylinders and an alloy cylinder head with a 7.6:1 compression ratio. Fuel was fed by a single Amal Monobloc carburettor except on the 99SS where twin carbs were fitted.[2]

Ignition was from a Lucas magneto and the power for the lights was from a dynamo. In 1958 this was changed to coil ignition and a crankshaft mounted alternator.[2] The model reverted to a magnito in 1962.[6]

Primary drive was by chain to a multiplate wet clutch and was enclosed in a pressed steel chaincase. The gearbox had 4 speeds.[2] For the 1957 model the gearbox was changed to the AMC gearbox used on AJS and Matchless twins.[7]

Cycle parts

[edit]

Cycle parts were shared with the 88. The frame was the featherbed and forks were short Roadholders. Full width alloy hubs were fitted with drum brakes, 8 in (200 mm) at the front and 7 in (180 mm) rear. A 7 in (180 mm) headlight was fitted with the speedo, ammeter and switch mounted in its shell.[2][8]

The featherbed frame was modified in 1960 by moving the top tubes closer together. The updated frame came to be known as the 'slimline' and the previous version as the 'wideline'.[9][10]

Model variants

[edit]

99

[edit]
1959 Dominator 99 'Smooth-Look'

The Model 99 was introduced in 1956. Norton updated their range, including the 99, to their new 'Smooth-Look'. Changes included new headlight shells, detachable embellishment panels on the petrol tank, new silencers and front hub.[11] A redesigned cylinder head was also fitted.[3] The Dominator name was revived in 1959 and the model was called the Model 99 Dominator.[12] With the introduction of the 'Bodystyled' Deluxe model, the existing bike became the 88 Standard Dominator.[13] The model was discontinued in 1962 following the introduction of the 650 cc Dominators.[14]

99 De Luxe

[edit]

Norton had first introduced semi-enclosed bodywork in 1958 on the 250 cc Norton Jubilee.[14] The 'Bodystyled' semi-enclosed bodywork was offered as an option on the Dominators in 1960, the De Luxe models.[13][14] Intended as a tourer, the semi-enclosed bodywork was claimed to keep the rider cleaner and the bodywork was easier to clean than a bare design. A fairing was offered as an optional extra. Many of these models later had the bodywork stripped off to convert the bike to a cafe racer. The model was discontinued in 1962.[14]

99 Sports Special

[edit]

The 99 Sports Special Dominator (99SS) was introduced in 1961 as a higher performance version of the 99. The model had the option of twin Amal Monobloc carburettors, and came with polished inlet ports and a hotter camshaft that had previously been fitted to the Manxman. A siamesed exhaust was fitted, or the option of a dual system and the option of chrome mudguards. Motor Cycle magazine obtained a top speed of 108 mph (174 km/h) during a test of the 99SS. The model was dropped after only a year when the 650SS was introduced in 1962.[15][16]

References

[edit]
  1. ^ Reynolds 1990, p. 99.
  2. ^ a b c d e f g h Salvadori 2019.
  3. ^ a b c "Norton Dominator 99". RealClassic. 11 January 2017. Retrieved 27 June 2021.
  4. ^ "Norton Dominator". Classic-British-Motorcycles.com. Retrieved 27 June 2021.
  5. ^ Kemp 2000, pp. 120–121.
  6. ^ Hewitt 2018.
  7. ^ "The Norton Commando Gearbox". www.preservationcycle.com. Retrieved 29 June 2021.
  8. ^ American Motorcyclist December 1955, p. 2.
  9. ^ Sharkey 2021.
  10. ^ Reynolds 1990, pp. 97–99.
  11. ^ "1957 Norton Brochure" (PDF). Retrieved 29 June 2021 – via www.classicbike.biz.
  12. ^ "1959 Norton Brochure" (PDF). Retrieved 29 June 2021 – via www.classicbike.biz.
  13. ^ a b "1960 Norton Brochure" (PDF). Retrieved 29 June 2021 – via www.classicbike.biz.
  14. ^ a b c d Clayton 2012.
  15. ^ "Road Test: Norton Dominator 99SS - The Classic Motorcycle". Classic Bike Hub UK. 15 March 2013. Retrieved 29 June 2021.
  16. ^ "1961 Norton 600cc Dominator 99SS Frame no. 97413 Engine no. 97413". Bonhams. Retrieved 29 June 2021.

Bibliography

[edit]
[edit]