A CLI-based Flasher for Sonix SN32F2xx MCUs.

This flasher is aimed for advanced users that don't need a GUI. If you require a GUI please use: Sonix-Flasher.

Features:

• Minimal dependencies
• Cross-platform
• Faster

Clone this repository:

git clone https://github.com/SonixQMK/SonixFlasherC

hidapi is a prequisite. If using windows, please install MinGW

Compile using:

make sonixflasher

./sonixflasher

• --vidpid -v Set VID and PID for the device to flash.
• --offset -o Set flashing offset (default: 0).
• --file -f Binary of the firmware to flash (*.bin extension).
• --jumploader -j Define if flashing a jumploader.
• --reboot -r Request bootloader reboot in OEM firmware (options: sonix, evision, hfd).
• --debug -d Enable debug mode.
• --list-vidpid -l Display supported VID/PID pairs.
• --nooffset -k Disable offset checks.
• --version -V Print version information.
• --help -h Show this help message.

Notice that some devices support flashing while booted. In that case, use

--reboot

to expose the ISP mode

• Flash jumploader to device with VID/PID 0x0c45/0x7040:

  sonixflasher --vidpid 0c45/7040 --file fw.bin -j
  

• Flash firmware to device with VID/PID 0x0c45/0x7040 and offset 0x200:

  sonixflasher --vidpid 0c45/7040 --file fw.bin -o 0x200
  

This project is licensed under the GNU License - see the LICENSE.md file for details