Pivit is a command line tool for managing x509 certificates stored on smart cards with PIV applet support (Yubikey), and using those certificates to sign and verify data.

It is fully compatible with how the git command line calls external programs to sign and verify commits and tags.

brew install pivit

go install github.com/cashapp/pivit/cmd/pivit@latest

To set up git to use pivit to sign and verify signatures run the following commands:

git config --(local|global) gpg.format x509
git config --(local|global) gpg.x509.program pivit

pivit --reset

Reset the Yubikey's PIV applet and create a new PIN to access it.

pivit --generate [--p256] [--self-sign | --no-csr] [--assume-yes] [--pin-policy] [--touch-policy]

Generate a new key pair in the Yubikey's card authentication slot.
This command will also generate and store a x509 certificate for the generated key that's signed by Yubico.

If the option --p256 is provided, the key pair is generated using elliptic curve P-256. Otherwise, Curve P-384 is used.

Add the --self-sign flag to generate a self-signed certificate; the certificate is signed with the newly-generated key.
You will be prompted to confirm a self-signed certificate is really desired, then prompted for the PIN, and then prompted to touch your Yubikey.
The output will contain 3 CERTIFICATE blocks instead of a CERTIFICATE_REQUEST at the end (example output below).
This option is useful mostly for testing purposes. The --assume-yes flag can be used in combination with the --self-sign option to disable its y/n prompt.

Add the --no-csr flag to skip the certificate signing request being printed. In this case, you will not be prompted to touch your Yubikey.
This option is useful if you don't need the generated key to be a part of an existing PKI.
you can still verify the key's certificate using Yubico's certificate here.

The --pin-policy flag controls when to prompt for a PIN when accessing the generated key.
Set to one of never, once, or always (default is never).

The --touch-policy flag controls when to prompt to physically touch the hardware when accessing the generated key.
Set to one of never, cached, or always (default is always).

Output for the command will look like:

Printing Yubikey device attestation certificate:
----- BEGIN CERTIFICATE -----
...
----- END CERTIFICATE -----
Printing generated key certificate:
----- BEGIN CERTIFICATE -----
...
----- END CERTIFICATE -----
Printing certificate signing request:
----- BEGIN CERTIFICATE REQUEST -----
...
----- END CERTIFICATE REQUEST-----

The CERTIFICATE REQUEST at the end and signed by the new generated private key, and can be used to issue a certificate signed by a CA.

If you choose to issue and use your own certificate, it's important to also verify that:

• The device attestation certificate is signed by Yubico.
• The key certificate is signed by the device attestation certificate.
• The public key in the certificate signing request is the same as the public key in the key certificate.

Pivit allows settings different attributes in the CSR via environment variables.

The following certificate options will be set as follows:

• Subject.CommonName will be set to the value of the PIVIT_EMAIL environment variable.
• Subject.Organization will be set to the value of the PIVIT_ORG environment variable.
• Subject.OrganizationalUnit will be set to the value of the PIVIT_ORG_UNIT environment variable.

Additionally, the following Subject Alternative Names (SANs) will be included in the certificate request:

• Email addresses will include PIVIT_EMAIL
• URIs will include all URLs specified in the PIVIT_CERT_URIS environment variable (URIs are separated by a space)

The PIV module supports multiple slots where keys and certificates can be stored.
Available slots - 9a, 9c, 9d, and 9e.

• 9e is the "Card Authentication" slot.
  This is the only slot that doesn't require a PIN to access the private key when signing with it, resulting in less friction in usage.
• 9a is the "Authentication" slot. Used for actions like system login.
• 9c is the "Digital Signature" slot. Used for document signing, or signing files and executables.
• 9d is the "Key Management" slot. Used for things like encrypting e-mails or files for the purpose of confidentially.

For more information

pivit allows choosing a slot using the -w flag.
For each command, if no slot is specified, 9e is used by default.
For example:

• Certificate generation

  pivit --generate [-w slot]

• Signing

  pivit -s -u userid [-w slot]

• Printing a certificate

  pivit --print [-w slot]

pivit --import [--first-pem] [file]

Imports a certificate from file.
The given filename is expected to contain a serialized x509 certificate encoded as a PEM block.

This action prompts for the Yubikey PIN.

Add --first-pem to import the first PEM block from file, ignoring the rest. This is helpful if using a CA that provides its issued certificates as a chain or bundle, with the end-entity certificate first (this is the convention).

pivit --print

Prints the certificate stored in the Yubikey's card authentication slot, alongside its fingerprint.
For example:

> pivit --print
bad126c47dc90e90e0c7ec90ec682b1717e52757
-----BEGIN CERTIFICATE-----
MIICczCCAVugAwIBAgIRANATKTxzlHOJgMdV30XRz5kwDQYJKoZIhvcNAQELBQAw
ITEfMB0GA1UEAwwWWXViaWNvIFBJViBBdHRlc3RhdGlvbjAgFw0xNjAzMTQwMDAw
MDBaGA8yMDUyMDQxNzAwMDAwMFowJTEjMCEGA1UEAwwaWXViaUtleSBQSVYgQXR0
ZXN0YXRpb24gOWUwdjAQBgcqhkjOPQIBBgUrgQQAIgNiAAT1l76Mvo6dJ4CwX2QQ
HImYRWbxLqt1kCVsn0PUn20DYtSKLuq8kCnMAn+kdneqjtaaBmWuPJH+g7LMyI18
QDQp2w+qSOf9ZWrOupMAGM8EpWXNTSNKoE50JhKXFbudBByjTjBMMBEGCisGAQQB
gsQKAwMEAwUBAjAUえーゆーBgorBgEEAYLECgMHBAYCBACDq1IwEAYKKwYBBAGCxAoDCAQC
AQIwDwYKKwYBBAGCxAoDCQQBBDANBgkqhkiG9w0BAQsFAAOCAQEAGSmu0PUMDfEb
PkmkJ/rKYvpOKhbmpryjXuZ7ENJ3jGq3foyLSN+aBbd3M1im2ejC6/upthcp1N5M
Mg2SN6MBRS4crtt43DVHepBPt2W07vW8h4uFosJX29HdhK0dP+RnBGDdWYo0nq7y
7q1Y1c0BI7oGnaORL0DzSDtdxAJAphjspWsWNCIP2DTWQPhLTg4DqmYd/ahygVsZ
IE64QvJDQC72Dfyad6tIajmtPncqPt857H0hEJv2X58iOoJA/wAeuId4or859cJU
GTDbN7Ke4LWXRbs7StJTgefmNgWmKjm1Q2qs80WGShyQ6OrxALejd8jivtcTwsDz
WvzdmHCOmg==
-----END CERTIFICATE-----

The certificate's fingerprint is calculated by performing a SHA1 checksum on the raw certificate bytes and then encoding the checksum as a hex string.

Use the certificate fingerprint to let git know which certificate to use when signing commits and tags:

FINGERPRINT=`pivit --print | head -1`
git config --(local|global) user.signingkey $FINGERPRINT

pivit -s [-a] [-b] [-u userid] [--status-fd=[num]] [-t url] [file]

• -a (--armor) - whether to wrap the signature in ASCII armor to make it printable.
• -b (--detach-sign) - make a detached signature.
• -u (--local-user) - either an email address or a key fingerprint encoded as a hex string.
  This identifier determines which certificate to use. If an email address is supplied, look for a certificate that contains the given address.
  If a key fingerprint is supplied, look for a certificate where its SHA1 checksum matched the given hex string.
• --status-fd - file descriptor to emit status messages to. 1 is stdout, 2 is stderr.
  Any value 0 or below means no status messages will be written.
• -t (--timestamp-authority) - URL of RFC3161 timestamp authority to use for timestamping.
• file - path to the file that will be signed. If no filename is specified, use stdin.

This command will cause the Yubikey to flash and will block until it is touched.

When git is set up to sign commits and tags, it'll use the following hardcoded parameters -sbau [user.signingkey] --status-fd=1.
user.signingkey is taken from git's local/global configuration.

Note: Pivit was designed to support signing git commits.
But, if the key being used was created using the --pin-policy=always it may not be fully supported.
Right now, Pivit prompts for the PIN only via the command line. If you're using GUI based git clients like GitKraken or SourceTree you'll probably miss that prompt.

pivit --verify [file ...]

Verifies the signed data specified in the file argument(s).

If no files were specified, read from stdin.
If one or no file paths were specified, assume the signature is attached to the signed data.

Otherwise, assume that the first file contains the signature, and the second contains the signed data.
Specify - to indicate the signed data should be read from stdin.