Template:Collapsible option

初はつ始はじめ狀態じょうたい：而家預あずか設しつらえ係がかりautocollapse

要よう設しつらえ呢個模も嘅初始はじめ狀態じょうたい，可か以用參さん數すう|state=：

• |state=collapsed：{{BASEPAGENAME|state=collapsed}}，等とう個こ模も顯示けんじ係がかり收おさむ埋うめ，即そく係がかり成なり個こ模かたぎ淨きよし係がかり睇到個こ標題ひょうだい列れつ
• |state=expanded：{{BASEPAGENAME|state=expanded}}，等とう個こ模も顯示けんじ係がかり攤開，即そく係がかり成なり個こ模も都と睇到
• |state=autocollapse: {{BASEPAGENAME|state=autocollapse}}，等とう個こ模も，
  • 如果有ゆう第だい個こ{{navbar}}、{{sidebar}}，或ある是ぜ但ただし有可ゆか折おり埋うめ參まい數かず嘅第啲表同時どうじ出現しゅつげん，就收埋うめ得え返かえし個こ標題ひょうだい列れつ
  • 如果冇第啲可折おり埋うめ嘅嘢，就顯示けんじ攤開

如果|state=參まいり數すう冇設，噉呢個こ模も初はつ始はじめ狀態じょうたい會かい跟Collapsible option模かたぎ嘅|default=參さん數すう。家いえ下か呢頁呢個模も，|default=參まいり數すう值係autocollapse.

模かたぎ解かい[睇] [改あらため] [史ふみ] [清きよし]

{{Collapsible option}} provides a standardised message for transclusion on the pages of collapsible templates whose collapsibility may be managed by the parameter state.

呢個模も可か以一係擺喺模本身嗰頁（放ひ落<noinclude>...</noinclude>標しめぎ籤くじ之の間あいだ），一係擺喺模嘅{{documentation subpage}}。

Indicating optional use of state name

The state parameter used to manage collapsible templates need not always be named explicitly, i.e. {{[Template name]|state}} can be the same as {{[Template name]|state=state}}. To indicate this in the {{Collapsible option}} message, add the parameter |statename=optional. This modifies the message so that it reads (if it were used for itself):

初はつ始はじめ狀態じょうたい：而家預あずか設しつらえ係がかりautocollapse

要よう設しつらえ呢個模も嘅初始はじめ狀態じょうたい，可か以用參さん數すう|state=：

• |state=collapsed：{{Collapsible option|state=collapsed}}，等とう個こ模も顯示けんじ係がかり收おさむ埋うめ，即そく係がかり成なり個こ模かたぎ淨きよし係がかり睇到個こ標題ひょうだい列れつ
• |state=expanded：{{Collapsible option|state=expanded}}，等とう個こ模も顯示けんじ係がかり攤開，即そく係がかり成なり個こ模も都と睇到
• |state=autocollapse: {{Collapsible option|state=autocollapse}}，等とう個こ模も，
  • 如果有ゆう第だい個こ{{navbar}}、{{sidebar}}，或ある是ぜ但ただし有可ゆか折おり埋うめ參まい數かず嘅第啲表同時どうじ出現しゅつげん，就收埋うめ得え返かえし個こ標題ひょうだい列れつ
  • 如果冇第啲可折おり埋うめ嘅嘢，就顯示けんじ攤開

如果|state=參まいり數すう冇設，噉呢個こ模も初はつ始はじめ狀態じょうたい會かい跟Collapsible option模かたぎ嘅|default=參さん數すう。家いえ下か呢頁呢個模も，|default=參まいり數すう值係autocollapse.

(This possibility is enabled by including:

• {{{1|}}} as part of a collapsible template's state parameterTemplate:Spaced ndashfor instance, as |state={{{state|{{{1|}}}}}} or |state={{{state|{{{1|<noinclude>expanded</noinclude>}}}}}}, etc.
• <noinclude>,<includeonly>as part of a collapsible template's state argumentTemplate:Spaced ndashfor instance, as |state={{{state<includeonly>|collapsed</includeonly>}}}

If, however, the template includes collapsible sections within itself (e.g. {{Navbox with collapsible groups}}), then enabling this possibility may introduce ambiguity as regards what is to be collapsed or expanded. In those instances, therefore, the requirement to use |state= should be retained.)

Changing the default state

To change the default state {{Collapsible option}} uses, add the parameter |default=collapsed or |default=expanded accordingly. To restore the default, remove any |default= previously included.

nobase

If the template name given to {{Collapsible option}} includes a (forward-)slash character ("/"), the parameter |nobase= (set to "on", "true", etc.) will need to be added so that the name is displayed correctly (i.e. so that {{PAGENAME}} rather than the default {{BASEPAGENAME}} is used to display it).