Showing 1–50 of 89 results for author: Sahin, M

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Towards quantum computing for clinical trial design and optimization: A perspective on new opportunities and challenges

Authors: Hakan Doga, M. Emre Sahin, Joao Bettencourt-Silva, Anh Pham, Eunyoung Kim, Alan Andress, Sudhir Saxena, Aritra Bose, Laxmi Parida, Jan Lukas Robertus, Hideaki Kawaguchi, Radwa Soliman, Daniel Blankenberg

Abstract: Clinical trials are pivotal in the drug discovery process to determine the safety and efficacy of a drug candidate. The high failure rates of these trials are attributed to deficiencies in clinical model development and protocol design. Improvements in the clinical drug design process could therefore yield significant benefits for all stakeholders involved. This paper examines the current challeng… ▽ More Clinical trials are pivotal in the drug discovery process to determine the safety and efficacy of a drug candidate. The high failure rates of these trials are attributed to deficiencies in clinical model development and protocol design. Improvements in the clinical drug design process could therefore yield significant benefits for all stakeholders involved. This paper examines the current challenges faced in clinical trial design and optimization, reviews established classical computational approaches, and introduces quantum algorithms aimed at enhancing these processes. Specifically, the focus is on three critical aspects: clinical trial simulations, site selection, and cohort identification. This study aims to provide a comprehensive framework that leverages quantum computing to innovate and refine the efficiency and effectiveness of clinical trials. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Molecular Arithmetic Coding (MAC) for Internet of Bio-Nano Things (IoBNT)

Authors: Melih Şahin, Beyza E. Ortlek, Ozgur B. Akan

Abstract: Molecular Communication (MC) has emerged as a promising paradigm employing molecules to transfer information at the nano-scale. Unlike MC channel coding, MC source coding has remained mostly an unexplored area of research. In a recent paper, prefix source coding was introduced into the field, through an MC-adapted version of the Huffman Coding. In the context of MC source coding, this paper propos… ▽ More Molecular Communication (MC) has emerged as a promising paradigm employing molecules to transfer information at the nano-scale. Unlike MC channel coding, MC source coding has remained mostly an unexplored area of research. In a recent paper, prefix source coding was introduced into the field, through an MC-adapted version of the Huffman Coding. In the context of MC source coding, this paper proposes the Molecular Arithmetic Coding (MAC) whose algorithmic implementation and code-structure is non-arbitrarily different than that of the widely-known classical arithmetic coding. MAC is designed to mitigate Inter-Symbol Interference (ISI) for alphabets with known symbol probabilities through, in a highly efficient way, avoiding consecutive 1-bits. However, due to bit precision limitations any arithmetic coding method faces, without any assumption made on the structure of the symbol alphabet, unique-decodability of MAC is not guaranteed. Accordingly, a uniquely-decodable new coding scheme named Molecular Arithmetic with Prefix Coding (MAPC) is also introduced. Across multiple alphabets, we show that MAPC provides a better compression performance compared to the optimal MC-adapted prefix coding. Simulation results of an exemplary alphabet demonstrates the superior symbol and word error rate performance of MAPC compared to the optimal MC-adapted prefix coding and to the uncoded BCSK schemes. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Comments: 9 pages, 24 figures, 6 tables

An Integrated Imitation and Reinforcement Learning Methodology for Robust Agile Aircraft Control with Limited Pilot Demonstration Data

Authors: Gulay Goktas Sever, Umut Demir, Abdullah Sadik Satir, Mustafa Cagatay Sahin, Nazim Kemal Ure

Abstract: In this paper, we present a methodology for constructing data-driven maneuver generation models for agile aircraft that can generalize across a wide range of trim conditions and aircraft model parameters. Maneuver generation models play a crucial role in the testing and evaluation of aircraft prototypes, providing insights into the maneuverability and agility of the aircraft. However, constructing… ▽ More In this paper, we present a methodology for constructing data-driven maneuver generation models for agile aircraft that can generalize across a wide range of trim conditions and aircraft model parameters. Maneuver generation models play a crucial role in the testing and evaluation of aircraft prototypes, providing insights into the maneuverability and agility of the aircraft. However, constructing the models typically requires extensive amounts of real pilot data, which can be time-consuming and costly to obtain. Moreover, models built with limited data often struggle to generalize beyond the specific flight conditions covered in the original dataset. To address these challenges, we propose a hybrid architecture that leverages a simulation model, referred to as the source model. This open-source agile aircraft simulator shares similar dynamics with the target aircraft and allows us to generate unlimited data for building a proxy maneuver generation model. We then fine-tune this model to the target aircraft using a limited amount of real pilot data. Our approach combines techniques from imitation learning, transfer learning, and reinforcement learning to achieve this objective. To validate our methodology, we utilize real agile pilot data provided by Turkish Aerospace Industries (TAI). By employing the F-16 as the source model, we demonstrate that it is possible to construct a maneuver generation model that generalizes across various trim conditions and aircraft parameters without requiring any additional real pilot data. Our results showcase the effectiveness of our approach in developing robust and adaptable models for agile aircraft. △ Less

Submitted 27 December, 2023; originally announced January 2024.

Comments: Preprint submitted to Aerospace Science and Technology

Efficient Parameter Optimisation for Quantum Kernel Alignment: A Sub-sampling Approach in Variational Training

Authors: M. Emre Sahin, Benjamin C. B. Symons, Pushpak Pati, Fayyaz Minhas, Declan Millar, Maria Gabrani, Jan Lukas Robertus, Stefano Mensa

Abstract: Quantum machine learning with quantum kernels for classification problems is a growing area of research. Recently, quantum kernel alignment techniques that parameterise the kernel have been developed, allowing the kernel to be trained and therefore aligned with a specific dataset. While quantum kernel alignment is a promising technique, it has been hampered by considerable training costs because t… ▽ More Quantum machine learning with quantum kernels for classification problems is a growing area of research. Recently, quantum kernel alignment techniques that parameterise the kernel have been developed, allowing the kernel to be trained and therefore aligned with a specific dataset. While quantum kernel alignment is a promising technique, it has been hampered by considerable training costs because the full kernel matrix must be constructed at every training iteration. Addressing this challenge, we introduce a novel method that seeks to balance efficiency and performance. We present a sub-sampling training approach that uses a subset of the kernel matrix at each training step, thereby reducing the overall computational cost of the training. In this work, we apply the sub-sampling method to synthetic datasets and a real-world breast cancer dataset and demonstrate considerable reductions in the number of circuits required to train the quantum kernel while maintaining classification accuracy. △ Less

Submitted 5 January, 2024; originally announced January 2024.

Reconstruction of electromagnetic showers in calorimeters using Deep Learning

Authors: Polina Simkina, Fabrice Couderc, Julie Malclès, Mehmet Özgür Sahin

Abstract: The precise reconstruction of properties of photons and electrons in modern high energy physics detectors, such as the CMS or Atlas experiments, plays a crucial role in numerous physics results. Conventional geometrical algorithms are used to reconstruct the energy and position of these particles from the showers they induce in the electromagnetic calorimeter. Despite their accuracy and efficiency… ▽ More The precise reconstruction of properties of photons and electrons in modern high energy physics detectors, such as the CMS or Atlas experiments, plays a crucial role in numerous physics results. Conventional geometrical algorithms are used to reconstruct the energy and position of these particles from the showers they induce in the electromagnetic calorimeter. Despite their accuracy and efficiency, these methods still suffer from several limitations, such as low-energy background and limited capacity to reconstruct close-by particles. This paper introduces an innovative machine-learning technique to measure the energy and position of photons and electrons based on convolutional and graph neural networks, taking the geometry of the CMS electromagnetic calorimeter as an example. The developed network demonstrates a significant improvement in resolution both for photon energy and position predictions compared to the algorithm used in CMS. Notably, one of the main advantages of this new approach is its ability to better distinguish between multiple close-by electromagnetic showers. △ Less

Submitted 29 November, 2023; originally announced November 2023.

OFDM-RSMA: Robust Transmission under Inter-Carrier Interference

Authors: Mehmet Mert Sahin, Onur Dizdar, Bruno Clerckx, Huseyin Arslan

Abstract: Rate-splitting multiple access (RSMA) is a multiple access scheme to mitigate the effects of the multi-user interference (MUI) in multi-antenna systems. In this study, we leverage the interference management capabilities of RSMA to tackle the issue of inter-carrier interference (ICI) in orthogonal frequency division multiplexing (OFDM) waveform. We formulate a sum-rate maximization problem to find… ▽ More Rate-splitting multiple access (RSMA) is a multiple access scheme to mitigate the effects of the multi-user interference (MUI) in multi-antenna systems. In this study, we leverage the interference management capabilities of RSMA to tackle the issue of inter-carrier interference (ICI) in orthogonal frequency division multiplexing (OFDM) waveform. We formulate a sum-rate maximization problem to find the optimal subcarrier and power allocation for downlink transmission in a two-user system using RSMA and OFDM. A weighted minimum mean-square error (WMMSE)-based algorithm is proposed to obtain a solution for the formulated non-convex problem. We show that the marriage of rate-splitting (RS) with OFDM provides complementary strengths to cope with peculiar characteristic of wireless medium and its performance-limiting challenges including inter-symbol interference (ISI), MUI, ICI, and inter-numerology interference (INI). The sum-rate performance of the proposed OFDM-RSMA scheme is numerically compared with that of conventional orthogonal frequency division multiple access (OFDMA) and OFDM-non-orthogonal multiple access (NOMA). It is shown that the proposed OFDM-RSMA outperforms OFDM-NOMA and OFDMA in diverse propagation channel conditions owing to its flexible structure and robust interference management capabilities. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Comments: Submitted to IEEE for possible publication

MSC Class: 94A12 ACM Class: C.2.0

Stopping microfluidic flow

Authors: Mehmet Akif Sahin, Muhammad Shehzad, Ghulam Destgeer

Abstract: We present a cross-comparison of three stop-flow configurations--such as low-pressure (LSF), high-pressure open-circuit (OC-HSF), and high-pressure short-circuit (SC-HSF) stop-flow--to rapidly bring a high flow velocity within a microchannel to a standstill. The average velocities inside the microchannels were reduced from > 1 m/s to < 10 um/s within 2s of initiating the stop-flow. The performance… ▽ More We present a cross-comparison of three stop-flow configurations--such as low-pressure (LSF), high-pressure open-circuit (OC-HSF), and high-pressure short-circuit (SC-HSF) stop-flow--to rapidly bring a high flow velocity within a microchannel to a standstill. The average velocities inside the microchannels were reduced from > 1 m/s to < 10 um/s within 2s of initiating the stop-flow. The performance of the three stop-flow configurations was assessed by measuring the residual flow velocities within microchannels having three orders-of-magnitude different flow resistances. The LSF configuration outperformed the OC-HSF and SC-HSF configurations within the high flow resistance microchannel, and resulted in a residual velocity of < 10 um/s. The OC-HSF configuration resulted in a residual velocity of < 150 um/s within a low flow resistance microchannel. The SC-HSF configuration resulted in a residual velocity of < 200 um/s across the three orders-of-magnitude different flow resistance microchannels, and < 100 um/s for the low flow resistance channel. We hypothesized that the residual velocity resulted from the compliance in the fluidic circuit, which was further investigated by varying the elasticity of the microchannel walls and the connecting tubing. A numerical model was developed to estimate the expanded volumes of the compliant microchannel and connecting tubings under a pressure gradient and to calculate the distance traveled by the sample fluid. A comparison of the numerically and experimentally obtained traveling distances confirmed our hypothesis that the residual velocities were an outcome of the compliance in the fluidic circuit. Therefore, a configuration with minimal fluidic circuit compliance resulted in the least residual velocity. △ Less

Submitted 7 August, 2023; v1 submitted 4 August, 2023; originally announced August 2023.

Incorporating Human Translator Style into English-Turkish Literary Machine Translation

Authors: Zeynep Yirmibeşoğlu, Olgun Dursun, Harun Dallı, Mehmet Şahin, Ena Hodzik, Sabri Gürses, Tunga Güngör

Abstract: Although machine translation systems are mostly designed to serve in the general domain, there is a growing tendency to adapt these systems to other domains like literary translation. In this paper, we focus on English-Turkish literary translation and develop machine translation models that take into account the stylistic features of translators. We fine-tune a pre-trained machine translation mode… ▽ More Although machine translation systems are mostly designed to serve in the general domain, there is a growing tendency to adapt these systems to other domains like literary translation. In this paper, we focus on English-Turkish literary translation and develop machine translation models that take into account the stylistic features of translators. We fine-tune a pre-trained machine translation model by the manually-aligned works of a particular translator. We make a detailed analysis of the effects of manual and automatic alignments, data augmentation methods, and corpus size on the translations. We propose an approach based on stylistic features to evaluate the style of a translator in the output translations. We show that the human translator style can be highly recreated in the target machine translations by adapting the models to the style of the translator. △ Less

Submitted 21 July, 2023; originally announced July 2023.

Journal ref: 24th Annual Conference of the European Association of Machine Translation (EAMT), June 2023, Tampere, Finland

The Hitchhiker's Guide to Malicious Third-Party Dependencies

Authors: Piergiorgio Ladisa, Merve Sahin, Serena Elisa Ponta, Marco Rosa, Matias Martinez, Olivier Barais

Abstract: The increasing popularity of certain programming languages has spurred the creation of ecosystem-specific package repositories and package managers. Such repositories (e.g., npm, PyPI) serve as public databases that users can query to retrieve packages for various functionalities, whereas package managers automatically handle dependency resolution and package installation on the client side. These… ▽ More The increasing popularity of certain programming languages has spurred the creation of ecosystem-specific package repositories and package managers. Such repositories (e.g., npm, PyPI) serve as public databases that users can query to retrieve packages for various functionalities, whereas package managers automatically handle dependency resolution and package installation on the client side. These mechanisms enhance software modularization and accelerate implementation. However, they have become a target for malicious actors seeking to propagate malware on a large scale. In this work, we show how attackers can leverage capabilities of popular package managers and languages to achieve arbitrary code execution on victim machines, thereby realizing open-source software supply chain attacks. Based on the analysis of 7 ecosystems, we identify 3 install-time and 4 runtime techniques, and we provide recommendations describing how to reduce the risk when consuming third-party dependencies. We will provide proof-of-concepts that demonstrate the identified techniques. Furthermore, we describe evasion strategies employed by attackers to circumvent detection mechanisms. △ Less

Submitted 6 October, 2023; v1 submitted 18 July, 2023; originally announced July 2023.

Comments: Proceedings of the 2023 Workshop on Software Supply Chain Offensive Research and Ecosystem Defenses (SCORED '23), November 30, 2023, Copenhagen, Denmark

Communication-Efficient Zeroth-Order Distributed Online Optimization: Algorithm, Theory, and Applications

Authors: Ege C. Kaya, M. Berk Sahin, Abolfazl Hashemi

Abstract: This paper focuses on a multi-agent zeroth-order online optimization problem in a federated learning setting for target tracking. The agents only sense their current distances to their targets and aim to maintain a minimum safe distance from each other to prevent collisions. The coordination among the agents and dissemination of collision-prevention information is managed by a central server using… ▽ More This paper focuses on a multi-agent zeroth-order online optimization problem in a federated learning setting for target tracking. The agents only sense their current distances to their targets and aim to maintain a minimum safe distance from each other to prevent collisions. The coordination among the agents and dissemination of collision-prevention information is managed by a central server using the federated learning paradigm. The proposed formulation leads to an instance of distributed online nonconvex optimization problem that is solved via a group of communication-constrained agents. To deal with the communication limitations of the agents, an error feedback-based compression scheme is utilized for agent-to-server communication. The proposed algorithm is analyzed theoretically for the general class of distributed online nonconvex optimization problems. We provide non-asymptotic convergence rates that show the dominant term is independent of the characteristics of the compression scheme. Our theoretical results feature a new approach that employs significantly more relaxed assumptions in comparison to standard literature. The performance of the proposed solution is further analyzed numerically in terms of tracking errors and collisions between agents in two relevant applications. △ Less

Submitted 8 June, 2023; originally announced June 2023.

Comments: 21 pages, 5 figures, and this paper has been accepted by IEEE Access

Multicarrier Rate-Splitting Multiple Access: Superiority of OFDM-RSMA over OFDMA and OFDM-NOMA

Authors: Mehmet Mert Sahin, Onur Dizdar, Bruno Clerckx, Huseyin Arslan

Abstract: Rate-splitting multiple access (RSMA) is a multiple access technique generalizing conventional techniques, such as, space-division multiple access (SDMA), non-orthogonal multiple access (NOMA), and physical layer multi-casting, which aims to address multi-user interference (MUI) in multiple-input multiple-output (MIMO) systems. In this study, we leverage the interference management capabilities of… ▽ More Rate-splitting multiple access (RSMA) is a multiple access technique generalizing conventional techniques, such as, space-division multiple access (SDMA), non-orthogonal multiple access (NOMA), and physical layer multi-casting, which aims to address multi-user interference (MUI) in multiple-input multiple-output (MIMO) systems. In this study, we leverage the interference management capabilities of RSMA to tackle the issue of inter-carrier interference (ICI) in orthogonal frequency division multiplexing (OFDM) waveform. We formulate a problem to find the optimal subcarrier and power allocation for downlink transmission in a two-user system using RSMA and OFDM and propose a weighted minimum mean-square error (WMMSE)-based algorithm to obtain a solution. The sum-rate performance of the proposed OFDM-RSMA scheme is compared with that of conventional orthogonal frequency division multiple access (OFDMA) and OFDM-NOMA by numerical results. It is shown that the proposed OFDM-RSMA outperforms OFDM-NOMA and OFDMA under ICI in diverse propagation channel conditions owing to its flexible structure and robust interference management capabilities. △ Less

Submitted 24 September, 2023; v1 submitted 25 March, 2023; originally announced March 2023.

Comments: Updated version of published paper in IEEE Communications Letters with correction in optimization problem (17b)

MSC Class: 94A12 ACM Class: C.2.0

Higgs production at next generation $e^+e^-$ colliders

Authors: Deniz Yilmaz, Mehmet Sahin, Dogukan Hazar Yavuz

Abstract: In this study, Higgs production processes, Higgsstrahlung and vector boson (W and Z) fusion processes, were investigated for four different future lepton colliders (CEPC, ILC, CLIC, and FCC-ee). The cross sections for each production process and corresponding backgrounds were calculated considering the ISR and beamstrahlung effects. Various cuts and the b-tagging method were used to reduce the bac… ▽ More In this study, Higgs production processes, Higgsstrahlung and vector boson (W and Z) fusion processes, were investigated for four different future lepton colliders (CEPC, ILC, CLIC, and FCC-ee). The cross sections for each production process and corresponding backgrounds were calculated considering the ISR and beamstrahlung effects. Various cuts and the b-tagging method were used to reduce the background. Finally, the number of events for each collider was determined, and significance calculations were performed. In our calculations, high event numbers were obtained for all four colliders for the Higgsstrahlung, W, and Z fusion process. This shows that electron-positron colliders will play an important role in future Higgs physics research. △ Less

Submitted 31 January, 2023; originally announced January 2023.

Comments: 10 pages, 8 figures

Algebraic Invariants of Codes on Weighted Projective Planes

Authors: Yağmur Çakıroğlu, Mesut Şahin

Abstract: Weighted projective spaces are natural generalizations of projective spaces with a rich structure. Projective Reed-Muller codes are error-correcting codes that played an important role in reliably transmitting information on digital communication channels. In this case study, we explore the power of commutative and homological algebraic techniques to study weighted projective Reed-Muller (WPRM) co… ▽ More Weighted projective spaces are natural generalizations of projective spaces with a rich structure. Projective Reed-Muller codes are error-correcting codes that played an important role in reliably transmitting information on digital communication channels. In this case study, we explore the power of commutative and homological algebraic techniques to study weighted projective Reed-Muller (WPRM) codes on weighted projective spaces of the form $\mathbb{P}(1,1,a)$. We compute minimal free resolutions and thereby obtain Hilbert series for the vanishing ideal of the $\mathbb{F}_q$-rational points, and compute main parameters for these codes. △ Less

Submitted 3 November, 2023; v1 submitted 12 January, 2023; originally announced January 2023.

Data driven background estimation in HEP using Generative Adversarial Networks

Authors: Victor Lohezic, Mehmet Ozgur Sahin, Fabrice Couderc, Julie Malcles

Abstract: Data-driven methods are widely used to overcome shortcomings of Monte Carlo simulations (lack of statistics, mismodeling of processes, etc.) in experimental high energy physics. A precise description of background processes is crucial to reach the optimal sensitivity for a measurement. However, the selection of the control region used to describe the background process in a region of interest bias… ▽ More Data-driven methods are widely used to overcome shortcomings of Monte Carlo simulations (lack of statistics, mismodeling of processes, etc.) in experimental high energy physics. A precise description of background processes is crucial to reach the optimal sensitivity for a measurement. However, the selection of the control region used to describe the background process in a region of interest biases the distribution of some physics observables, rendering the use of such observables impossible in a physics analysis. Rather than discarding these events and/or observables, we propose a novel method to generate physics objects compatible with the region of interest and properly describing the correlations with the rest of the event properties. We use a generative adversarial network (GAN) for this task, as GANs are among the best generator models for various applications. We illustrate the method by generating a new misidentified photon for the $γがんま+ \mathrm{jets}$ background of the $\mathrm{H}\toγがんまγがんま$ analysis at the CERN LHC, and demonstrate that this GAN generator is able to produce a coherent object correlated with the different properties of the rest of the event. △ Less

Submitted 22 March, 2023; v1 submitted 7 December, 2022; originally announced December 2022.

Journal ref: Eur. Phys. J. C 83, 256 (2023)

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Codes on Subgroups of Weighted Projective Tori

Authors: Mesut Şahin, Oğuz Yayla

Abstract: We obtain certain algebraic invariants relevant to study codes on subgroups of weighted projective tori inside an $n$-dimensional weighted projective space. As application, we compute all the main parameters of generalized toric codes on these subgroups of tori lying inside a weighted projective plane of the form $\Pp(1,1,a)$. We obtain certain algebraic invariants relevant to study codes on subgroups of weighted projective tori inside an $n$-dimensional weighted projective space. As application, we compute all the main parameters of generalized toric codes on these subgroups of tori lying inside a weighted projective plane of the form $\Pp(1,1,a)$. △ Less

Submitted 3 November, 2023; v1 submitted 14 October, 2022; originally announced October 2022.

Comments: supported by TUBITAK Project No:119F177

MSC Class: Primary 14M25; 14G05; Secondary 94B27; 11T71

Sound and Complete Verification of Polynomial Networks

Authors: Elias Abad Rocamora, Mehmet Fatih Sahin, Fanghui Liu, Grigorios G Chrysos, Volkan Cevher

Abstract: Polynomial Networks (PNs) have demonstrated promising performance on face and image recognition recently. However, robustness of PNs is unclear and thus obtaining certificates becomes imperative for enabling their adoption in real-world applications. Existing verification algorithms on ReLU neural networks (NNs) based on classical branch and bound (BaB) techniques cannot be trivially applied to PN… ▽ More Polynomial Networks (PNs) have demonstrated promising performance on face and image recognition recently. However, robustness of PNs is unclear and thus obtaining certificates becomes imperative for enabling their adoption in real-world applications. Existing verification algorithms on ReLU neural networks (NNs) based on classical branch and bound (BaB) techniques cannot be trivially applied to PN verification. In this work, we devise a new bounding method, equipped with BaB for global convergence guarantees, called Verification of Polynomial Networks or VPN for short. One key insight is that we obtain much tighter bounds than the interval bound propagation (IBP) and DeepT-Fast [Bonaert et al., 2021] baselines. This enables sound and complete PN verification with empirical validation on MNIST, CIFAR10 and STL10 datasets. We believe our method has its own interest to NN verification. The source code is publicly available at https://github.com/megaelius/PNVerification. △ Less

Submitted 22 October, 2022; v1 submitted 15 September, 2022; originally announced September 2022.

Comments: Accepted in NeurIPS 2022

Computing Vanishing Ideals for Toric Codes

Authors: Mesut Şahin

Abstract: Motivated by applications to the theory of error-correcting codes, we give an algorithmic method for computing a generating set for the ideal generated by $βべーた$-graded polynomials vanishing on a subset of a simplicial complete toric variety $X$ over a finite field $\mathbb{F}_q$, parameterized by rational functions, where $βべーた$ is a $d\times r$ matrix whose columns generate a subsemigroup… ▽ More Motivated by applications to the theory of error-correcting codes, we give an algorithmic method for computing a generating set for the ideal generated by $βべーた$-graded polynomials vanishing on a subset of a simplicial complete toric variety $X$ over a finite field $\mathbb{F}_q$, parameterized by rational functions, where $βべーた$ is a $d\times r$ matrix whose columns generate a subsemigroup $\mathbb{N}βべーた$ of $\mathbb{N}^d$. We also give a method for computing the vanishing ideal of the set of $\mathbb{F}_q$-rational points of $X$. When $βべーた=[w_1 \cdots w_r]$ is a row matrix corresponding to a numerical semigroup $\mathbb{N}βべーた=\langle w_1,\dots,w_r \rangle$, $X$ is a weighted projective space and generators of its vanishing ideal is given using generators of defining (toric) ideals of numerical semigroup rings corresponding to semigroups generated by subsets of $\{w_1,\dots,w_r\}$. △ Less

Submitted 3 July, 2022; originally announced July 2022.

Comments: 19 pages

MSC Class: Primary 14M25; 14G05; Secondary 94B27; 11T71

Revisiting the Wireless Channel from Physical Layer Security Perspective

Authors: Abuu. B. Kihero, Haji. M. Furqan, M. M. Sahin, Huseyin Arslan

Abstract: Security has emerged as one of the critical requirements in future wireless networks. Unlike traditional cryptography-based security, physical layer security (PLS) exploits various features of the random wireless channel to secure not only the information being communicated but the whole communication process from any type of attack. Future wireless networks are envisioned to feature new technolog… ▽ More Security has emerged as one of the critical requirements in future wireless networks. Unlike traditional cryptography-based security, physical layer security (PLS) exploits various features of the random wireless channel to secure not only the information being communicated but the whole communication process from any type of attack. Future wireless networks are envisioned to feature new technologies such as re-configurable intelligent surfaces, massive multiple input multiple output, and sensing, to accommodate the emerging use-cases. Both, the new technologies and the new use-cases have been found to enrich the channel characteristics by unveiling some new channel features which can be readily exploited to facilitate PLS. This article surveys these new channel features to reveal their potential for PLS implementation. In the course of the article, the assessments of important qualities while selecting a certain channel feature for the PLS application are discussed. The importance of the channel control concept and sensing technologies that facilitate the accessibility of certain channel features are highlighted from the PLS perspective. Security attacks aimed at channel characteristics, rather than the communication itself, in order to disrupt PLS implementations are also discussed. Finally, the article summarizes the possible research direction for channel-based PLS. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Comments: This work has been submitted to the IEEE Journal for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Contact Interactions at Future Circular Collider based Muon-Proton Colliders

Authors: Gural Aydin, Yusuf Oguzhan Günaydin, Mehmet Sahin, Saleh Sultansoy, Mehmet Türker Tarakcioglu

Abstract: Recently proposed Future Circular Collider based muon-proton colliders will allow investigating lepton-hadron interactions at the highest center-of-mass energy. In this study, we investigate the potential of these colliders for a four-fermion contact interactions search. Regarding the constructive and destructive interferences of contact interactions, we estimated discovery, observation, and exclu… ▽ More Recently proposed Future Circular Collider based muon-proton colliders will allow investigating lepton-hadron interactions at the highest center-of-mass energy. In this study, we investigate the potential of these colliders for a four-fermion contact interactions search. Regarding the constructive and destructive interferences of contact interactions, we estimated discovery, observation, and exclusion limits on the compositeness scale for the left-left, right-right, left-right, and right-left helicity structures. This study's findings show that the FCC-based μみゅーp colliders have great potential for investigating four-fermion contact interactions. △ Less

Submitted 3 November, 2022; v1 submitted 20 May, 2021; originally announced May 2021.

Comments: 10 pages, 8 figures, and 7 tables

Rational points of lattice ideals on a toric variety and toric codes

Authors: Mesut Şahin

Abstract: We show that the number of rational points of a subgroup inside a toric variety over a finite field defined by a homogeneous lattice ideal can be computed via Smith normal form of the matrix whose columns constitute a basis of the lattice. This generalizes and yields a concise toric geometric proof of the same fact proven purely algebraically by Lopez and Villarreal for the case of a projective sp… ▽ More We show that the number of rational points of a subgroup inside a toric variety over a finite field defined by a homogeneous lattice ideal can be computed via Smith normal form of the matrix whose columns constitute a basis of the lattice. This generalizes and yields a concise toric geometric proof of the same fact proven purely algebraically by Lopez and Villarreal for the case of a projective space and a standard homogeneous lattice ideal of dimension one. We also prove a Nullstellensatz type theorem over a finite field establishing a one to one correspondence between subgroups of the dense split torus and certain homogeneous lattice ideals. As application, we compute the main parameters of generalized toric codes on subgroups of the torus of Hirzebruch surfaces, generalizing the existing literature. △ Less

Submitted 3 May, 2023; v1 submitted 10 May, 2021; originally announced May 2021.

Comments: 26 pages, 5 figures, supported by TUBITAK 119F177, to appear in Finite Fields and their Applications

MSC Class: Primary 14M25; 14G05; Secondary 94B27; 11T71

Excited muon production at muon colliders via contact interaction

Authors: M. Sahin, A. Caliskan

Abstract: In recent years, with the enlightenment of some issues encountered at muon colliders, muon colliders have become more feasible for the high-energy physics community. For this reason, we studied single production of excited muon at muon colliders via contact interaction. Besides, we assumed that the excited muon is produced via contact interactions and decays to the photon and the muon through the… ▽ More In recent years, with the enlightenment of some issues encountered at muon colliders, muon colliders have become more feasible for the high-energy physics community. For this reason, we studied single production of excited muon at muon colliders via contact interaction. Besides, we assumed that the excited muon is produced via contact interactions and decays to the photon and the muon through the gauge interaction. Then, signal and background analyses were performed at the muon anti-muon collider options with 6 TeV, 14 TeV, and 100 TeV center-of-mass energies for the excited muon. Attainable mass and compositeness scale limits were calculated for the excited muon at the muon anti-muon colliders. As a result of the calculations, it was concluded that the muon-antimuon colliders would be a perfect collider option for the excited muon investigations. △ Less

Submitted 25 May, 2021; v1 submitted 5 May, 2021; originally announced May 2021.

Comments: 22 pages, 30 figures, 6 tables

Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector

Authors: R. Abbott, A. Abreu, F. Addesa, M. Alhusseini, T. Anderson, Y. Andreev, A. Apresyan, R. Arcidiacono, M. Arenton, E. Auffray, D. Bastos, L. A. T. Bauerdick, R. Bellan, M. Bellato, A. Benaglia, M. Benettoni, R. Bertoni, M. Besancon, S. Bharthuar, A. Bornheim, E. Brücken, J. N. Butler, C. Campagnari, M. Campana, R. Carlin , et al. (174 additional authors not shown)

Abstract: The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about… ▽ More The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices. △ Less

Submitted 16 July, 2021; v1 submitted 15 April, 2021; originally announced April 2021.

Journal ref: Journal of Instrumentation, Volume 16, July 2021

Construction and commissioning of CMS CE prototype silicon modules

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul… ▽ More As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 35 pages, submitted to JINST

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca… ▽ More The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers. △ Less

Submitted 8 December, 2020; v1 submitted 7 December, 2020; originally announced December 2020.

SuperCell: A Wide-Area Coverage Solution Using High-Gain, High-Order Sectorized Antennas on Tall Towers

Authors: Pratheep Bondalapati, Abhishek Tiwari, Mustafa Emin Sahin, Qi Tang, Srishti Saraswat, Vishvas Suryakumar, Ali Yazdan, Julius Kusuma, Amit Dubey

Abstract: In this article we introduce a novel solution called SuperCell, which can improve the return on investment (ROI) for rural area network coverage. SuperCell offers two key technical features: it uses tall towers with high-gain antennas for wide coverage and high-order sectorization for high capacity. We show that a solution encompassing a high-elevation platform in excess of 200 meters increases co… ▽ More In this article we introduce a novel solution called SuperCell, which can improve the return on investment (ROI) for rural area network coverage. SuperCell offers two key technical features: it uses tall towers with high-gain antennas for wide coverage and high-order sectorization for high capacity. We show that a solution encompassing a high-elevation platform in excess of 200 meters increases coverage by 5x. Combined with dense frequency reuse by using as many as 36 azimuthal sectors from a single location, our solution can adequately serve the rural coverage and capacity demands. We validate this through propagation analysis, modeling, and experiments. The article gives a design perspective using different classes of antennas: Luneburg lens, active/passive phased array, and spatial multiplexing solutions. For each class, the corresponding analytical model of the resulting signal-to-interference plus noise ratio (SINR) based range and capacity prediction is presented. The spatial multiplexing solution is also validated through field measurements and additional 3D ray-tracing simulation. Finally, in this article we also shed light on two recent SuperCell field trials performed using a Luneburg lens antenna system. The trials took place in rural New Mexico and Mississippi. In the trials, we quantified the coverage and capacity of SuperCell in barren land and in a densely forested location, respectively. In the article, we demonstrate the results obtained in the trials and share the lessons learned regarding green-field and brown-field deployments. △ Less

Submitted 21 December, 2020; v1 submitted 30 November, 2020; originally announced December 2020.

Molecular Communication Theoretical Modeling and Analysis of SARS-CoV2 Transmission in Human Respiratory System

Authors: Caglar Koca, Meltem Civas, Selin M. Sahin, Onder Ergonul, Ozgur B. Akan

Abstract: Severe Acute Respiratory Syndrome-CoronaVirus 2 (SARS-CoV2) caused the ongoing pandemic. This pandemic devastated the world by killing more than a million people, as of October 2020. It is imperative to understand the transmission dynamics of SARS-CoV2 so that novel and interdisciplinary prevention, diagnostic, and therapeutic techniques could be developed. In this work, we model and analyze the t… ▽ More Severe Acute Respiratory Syndrome-CoronaVirus 2 (SARS-CoV2) caused the ongoing pandemic. This pandemic devastated the world by killing more than a million people, as of October 2020. It is imperative to understand the transmission dynamics of SARS-CoV2 so that novel and interdisciplinary prevention, diagnostic, and therapeutic techniques could be developed. In this work, we model and analyze the transmission of SARS-CoV2 through the human respiratory tract from a molecular communication perspective. We consider that virus diffusion occurs in the mucus layer so that the shape of the tract does not have a significant effect on the transmission. Hence, this model reduces the inherent complexity of the human respiratory system. We further provide the impulse response of SARS-CoV2-ACE2 receptor binding event to determine the proportion of the virus population reaching different regions of the respiratory tract. Our findings confirm the results in the experimental literature on higher mucus flow rate causing virus migration to the lower respiratory tract. These results are especially important to understand the effect of SARS-CoV2 on the different human populations at different ages who have different mucus flow rates and ACE2 receptor concentrations in the different regions of the respiratory tract. △ Less

Submitted 22 March, 2021; v1 submitted 7 November, 2020; originally announced November 2020.

Comments: IEEE Transactions on Molecular, Biological, and Multi-Scale Communications

Application-Based Coexistence of Different Waveforms on Non-orthogonal Multiple Access

Authors: Mehmet Mert Şahin, Hüseyin Arslan

Abstract: The coexistence of different wireless communication systems such as LTE and Wi-Fi by sharing the unlicensed band is well studied in the literature. In these studies, various methods are proposed to support the coexistence of systems, including listen-before-talk mechanism, joint user association and resource allocation. However, in this study, the coexistence of different waveform structures in th… ▽ More The coexistence of different wireless communication systems such as LTE and Wi-Fi by sharing the unlicensed band is well studied in the literature. In these studies, various methods are proposed to support the coexistence of systems, including listen-before-talk mechanism, joint user association and resource allocation. However, in this study, the coexistence of different waveform structures in the same resource elements are studied under the theory of non-orthogonal multiple access. This study introduces a paradigm-shift on NOMA towards the application-centric waveform coexistence. Throughout the paper, the coexistence of different waveforms is explained with two specific use cases, which are power-balanced NOMA and joint radar-sensing and communication with NOMA. In addition, some of the previous works in the literature regarding non-orthogonal waveform coexistence are reviewed. However, the concept is not limited to these use cases. With the rapid development of wireless technology, next-generation wireless systems are proposed to be flexible and hybrid, having different kinds of capabilities such as sensing, security, intelligence, control, and computing. Therefore, the concept of different waveforms' coexistence to meet these concerns are becoming impressive for researchers. △ Less

Submitted 1 September, 2020; originally announced September 2020.

Comments: Submitted to IEEE for possible publication. arXiv admin note: text overlap with arXiv:2007.05753, arXiv:2003.05548

MSC Class: 94A12 ACM Class: C.2.0

The Large Hadron-Electron Collider at the HL-LHC

Authors: P. Agostini, H. Aksakal, S. Alekhin, P. P. Allport, N. Andari, K. D. J. Andre, D. Angal-Kalinin, S. Antusch, L. Aperio Bella, L. Apolinario, R. Apsimon, A. Apyan, G. Arduini, V. Ari, A. Armbruster, N. Armesto, B. Auchmann, K. Aulenbacher, G. Azuelos, S. Backovic, I. Bailey, S. Bailey, F. Balli, S. Behera, O. Behnke , et al. (312 additional authors not shown)

Abstract: The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent el… ▽ More The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent electron-proton and proton-proton operation. This report represents an update of the Conceptual Design Report (CDR) of the LHeC, published in 2012. It comprises new results on parton structure of the proton and heavier nuclei, QCD dynamics, electroweak and top-quark physics. It is shown how the LHeC will open a new chapter of nuclear particle physics in extending the accessible kinematic range in lepton-nucleus scattering by several orders of magnitude. Due to enhanced luminosity, large energy and the cleanliness of the hadronic final states, the LHeC has a strong Higgs physics programme and its own discovery potential for new physics. Building on the 2012 CDR, the report represents a detailed updated design of the energy recovery electron linac (ERL) including new lattice, magnet, superconducting radio frequency technology and further components. Challenges of energy recovery are described and the lower energy, high current, 3-turn ERL facility, PERLE at Orsay, is presented which uses the LHeC characteristics serving as a development facility for the design and operation of the LHeC. An updated detector design is presented corresponding to the acceptance, resolution and calibration goals which arise from the Higgs and parton density function physics programmes. The paper also presents novel results on the Future Circular Collider in electron-hadron mode, FCC-eh, which utilises the same ERL technology to further extend the reach of DIS to even higher centre-of-mass energies. △ Less

Submitted 12 April, 2021; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: 373 pages, many figures, to be published by J. Phys. G

Report number: CERN-ACC-Note-2020-0002

Journal ref: J.Phys.G 48 (2021) 11, 110501

Multi-functional Coexistence of Radar-Sensing and Communication Waveforms

Authors: Mehmet Mert Sahin, Huseyin Arslan

Abstract: In this study, a novel transmission scheme is proposed to serve radar-sensing and communication objectives at the same time and allocated bandwidth. The proposed transmitted frame non-orthogonally superimposes two different waveforms, which are frequency modulated continuous-wave (FMCW) for radar-sensing and orthogonal frequency division multiplexing (OFDM) for communication. Also, the receiver sc… ▽ More In this study, a novel transmission scheme is proposed to serve radar-sensing and communication objectives at the same time and allocated bandwidth. The proposed transmitted frame non-orthogonally superimposes two different waveforms, which are frequency modulated continuous-wave (FMCW) for radar-sensing and orthogonal frequency division multiplexing (OFDM) for communication. Also, the receiver scheme that performs channel estimation via radar-sensing functionality without degrading data rate of communication operation is introduced. As numerically evaluated, the proposed system achieves good sensing accuracy even if the signal-to-noise ratio (SNR) is low, and communication performance is only 0.6 dBでしべる less at the target bit-error rate (BER) of 1% compared to the assumption of perfect channel state information (CSI) without any pilot overhead over OFDM subcarriers. △ Less

Submitted 11 July, 2020; originally announced July 2020.

Comments: Accepted for presentation in VTC 2020 Fall Workshop

MSC Class: 94A12 ACM Class: C.2.0

Families of sequences with good family complexity and cross-correlation measure

Authors: Kenan Doğan, Murat Şahin, Oğuz Yayla

Abstract: In this paper we study pseudorandomness of a family of sequences in terms of two measures, the family complexity ($f$-complexity) and the cross-correlation measure of order $\ell$. We consider sequences not only on binary alphabet but also on $k$-symbols ($k$-ary) alphabet. We first generalize some known methods on construction of the family of binary pseudorandom sequences. We prove a bound on th… ▽ More In this paper we study pseudorandomness of a family of sequences in terms of two measures, the family complexity ($f$-complexity) and the cross-correlation measure of order $\ell$. We consider sequences not only on binary alphabet but also on $k$-symbols ($k$-ary) alphabet. We first generalize some known methods on construction of the family of binary pseudorandom sequences. We prove a bound on the $f$-complexity of a large family of binary sequences of Legendre-symbols of certain irreducible polynomials. We show that this family as well as its dual family have both a large family complexity and a small cross-correlation measure up to a rather large order. Next, we present another family of binary sequences having high $f$-complexity and low cross-correlation measure. Then we extend the results to the family of sequences on $k$-symbols alphabet. △ Less

Submitted 7 May, 2024; v1 submitted 28 April, 2020; originally announced April 2020.

Comments: 15 pages. Comments are welcome!

MSC Class: 11K45; 94A55; 94A60

Waveform-Domain NOMA: The Future of Multiple Access

Authors: Mehmet Mert Şahin, Hüseyin Arslan

Abstract: This paper introduces a novel non-orthogonal multiple access (NOMA) concept named waveform-domain NOMA, which proposes the coexistence of different waveforms in the same resource element (RE). Regarding the demands of each user equipments (UEs), appropriate waveforms are assigned intelligently and decoded at the receiver side properly. Since the performance gain of power-domain NOMA compared to mu… ▽ More This paper introduces a novel non-orthogonal multiple access (NOMA) concept named waveform-domain NOMA, which proposes the coexistence of different waveforms in the same resource element (RE). Regarding the demands of each user equipments (UEs), appropriate waveforms are assigned intelligently and decoded at the receiver side properly. Since the performance gain of power-domain NOMA compared to multi-user multiple-input-multiple-output (MU-MIMO) degrades in the case of successive interference cancellation (SIC) and channel estimation errors, NOMA is not considered as a work-item in 3GPP anymore. The novel waveform-domain NOMA concept provides a remedy for the problems of the power-domain NOMA scheme as well as flexibility in terms of reliability, latency, and energy efficiency. To mitigate SIC errors, low-density parity-check (LDPC) codes aided soft interference cancellation technique is used. As numerically evaluated, the proposed waveform-domain NOMA scheme outperforms the conventional power-domain NOMA in the power-balanced scenario. △ Less

Submitted 11 March, 2020; originally announced March 2020.

Comments: 6 pages,6 figures. Accepted for presentation in ICC Workshop 2020, Dublin, Ireland

MSC Class: 94A12 ACM Class: C.2.0

An Inexact Augmented Lagrangian Framework for Nonconvex Optimization with Nonlinear Constraints

Authors: Mehmet Fatih Sahin, Armin Eftekhari, Ahmet Alacaoglu, Fabian Latorre, Volkan Cevher

Abstract: We propose a practical inexact augmented Lagrangian method (iALM) for nonconvex problems with nonlinear constraints. We characterize the total computational complexity of our method subject to a verifiable geometric condition, which is closely related to the Polyak-Lojasiewicz and Mangasarian-Fromowitz conditions. In particular, when a first-order solver is used for the inner iterates, we prove… ▽ More We propose a practical inexact augmented Lagrangian method (iALM) for nonconvex problems with nonlinear constraints. We characterize the total computational complexity of our method subject to a verifiable geometric condition, which is closely related to the Polyak-Lojasiewicz and Mangasarian-Fromowitz conditions. In particular, when a first-order solver is used for the inner iterates, we prove that iALM finds a first-order stationary point with $\tilde{\mathcal{O}}(1/εいぷしろん^4)$ calls to the first-order oracle. If, in addition, the problem is smooth and a second-order solver is used for the inner iterates, iALM finds a second-order stationary point with $\tilde{\mathcal{O}}(1/εいぷしろん^5)$ calls to the second-order oracle, which matches the known theoretical complexity result in the literature. We also provide strong numerical evidence on large-scale machine learning problems, including the Burer-Monteiro factorization of semidefinite programs, and a novel nonconvex relaxation of the standard basis pursuit template. For these examples, we also show how to verify our geometric condition. △ Less

Submitted 20 April, 2022; v1 submitted 26 June, 2019; originally announced June 2019.

Journal ref: In proceedings of NeurIPS 2019, pages 13943-13955, volume 32: http://papers.nips.cc/paper/9545-an-inexact-augmented-lagrangian-framework-for-nonconvex-optimization-with-nonlinear-constraints

Excited Quarks Production at FCC and S$pp$C $pp$ Colliders

Authors: Mehmet Sahin, Güral Aydin, Yusuf Oguzhan Günaydin

Abstract: Potential discovery, observation and exclusion limits of excited $u$ and $d$ quarks with gamma+jet final state are researched at the multi-TeV scale colliders, FCC and S$pp$C in this work. Both colliders, FCC and S$pp$C, show that excited $u$ and $d$ quarks could be discovered up to 42.1 TeV and 55.2 TeV for $u^\star$, 30.3 TeV and 39.4 TeV for $d^\star$ and 42.3 TeV and 55.5 TeV mass values for d… ▽ More Potential discovery, observation and exclusion limits of excited $u$ and $d$ quarks with gamma+jet final state are researched at the multi-TeV scale colliders, FCC and S$pp$C in this work. Both colliders, FCC and S$pp$C, show that excited $u$ and $d$ quarks could be discovered up to 42.1 TeV and 55.2 TeV for $u^\star$, 30.3 TeV and 39.4 TeV for $d^\star$ and 42.3 TeV and 55.5 TeV mass values for degenerate case (m$_{u^\star}$ = m$_{d^\star}$), respectively. Determination of excited quarks compositeness scale is examined, which will be up to multi-PeV level. Beside these analysis, free parameters ($f_s,\;f\;\text{and}\; f^\prime$) are scanned from around 0.1 up to 1 that show excited quark could be discovered at dozens of TeV with even coupling constants under 0.1. △ Less

Submitted 2 July, 2019; v1 submitted 24 June, 2019; originally announced June 2019.

Comments: 16 pages, 8 figures, 3 tables, 6 equations

A Search for R-Parity Violated Scalar Tau-neutrino ($\widetilde{νにゅー_τたう}$) at the Future Circular Collider

Authors: Yusuf Oguzhan Günaydın, Sehban Kartal, Yunus Emre Gokyayli, Carmine Elvezio Pagliarone, Mehmet Sahin, Saleh Sultansoy

Abstract: Future Circular Collider is one of the next generation energy-frontier proton-proton colliders with 100 TeV center of mass energy and promising very high luminosity. FCC will be an extraordinary machine for searching Beyond the Standard Model physics because of its very high center of mass energy and luminosity. Searching supersymmetric particles via R-parity violated interactions could be listed… ▽ More Future Circular Collider is one of the next generation energy-frontier proton-proton colliders with 100 TeV center of mass energy and promising very high luminosity. FCC will be an extraordinary machine for searching Beyond the Standard Model physics because of its very high center of mass energy and luminosity. Searching supersymmetric particles via R-parity violated interactions could be listed in promising BSM physics at the FCC. Scalar tau neutrino is one of the most interesting predictions. A search for $\widetildeνにゅー_τたう$ neutrino decaying into $eμみゅー$ final state via R-parity violated interactions has been conducted at the FCC-pp. It is seen from this research that FCC-pp will be able to discover $\widetildeνにゅー_τたう$ up to 28.8 TeV, observe 32.0 TeV and exclude 34.5 TeV mass values by taking $λらむだ_{311}^{\prime}=0.11$ and $λらむだ_{312}=λらむだ_{321}=0.07$ at $\mathcal{L}_{int}=17500\,fb^{-1}$. FCC-pp, also, will allow to examine very low values of the Yukawa coupling constants which cause R-parity violation interactions. It is obviously seen that FCC-pp will give an opportunity for detailed research on scalar tau neutrino production and decay via R-parity violated interactions. △ Less

Submitted 1 April, 2019; v1 submitted 19 August, 2018; originally announced August 2018.

Comments: 14 pages, 9 figures, 2 tables

Search for Excited $u$ and $d$ Quarks in Dijet Final States at Future $pp$ Colliders

Authors: Ahmet Nuri Akay, Yusuf Oguzhan Günaydin, Mehmet Sahin, Saleh Sultansoy

Abstract: Resonant production of excited $u$ and $d$ quarks at the Future Circular Collider and Super proton-proton Collider have been researched. Dominant jet-jet decay mode has been considered. It is shown that FCC and SppC have great potential for discovery of excited $u$ ($d$) quark: up to 44.1 (36.3) and 58.4 (47.8) TeV masses, respectively. For degenerate case (M$_{u^{\star}}$ = M$_{d^{\star}}$), thes… ▽ More Resonant production of excited $u$ and $d$ quarks at the Future Circular Collider and Super proton-proton Collider have been researched. Dominant jet-jet decay mode has been considered. It is shown that FCC and SppC have great potential for discovery of excited $u$ ($d$) quark: up to 44.1 (36.3) and 58.4 (47.8) TeV masses, respectively. For degenerate case (M$_{u^{\star}}$ = M$_{d^{\star}}$), these values are 45.9 and 60.9 TeV, respectively. This discovery will also afford an opportunity to determine the compositeness scale up to multi-PeV level. △ Less

Submitted 25 February, 2019; v1 submitted 10 July, 2018; originally announced July 2018.

Comments: 16 pages, 7 figures, 5 tables

Effect of the shell material and confinement type on the conversion efficiency of the core/shell quantum dot nanocrystal solar cells

Authors: Mehmet Sahin

Abstract: In this study, effects of the shell material and confinement type on the conversion efficiency of the core/shell quantum dot nanocrystal (QDNC) solar cells have been investigated in a detail manner. For this purpose, the conventional, i.e original, detailed balance model, developed by Shockley and Queisser to calculate an upper limit for conversion efficiency of silicon p-n junction solar cells, i… ▽ More In this study, effects of the shell material and confinement type on the conversion efficiency of the core/shell quantum dot nanocrystal (QDNC) solar cells have been investigated in a detail manner. For this purpose, the conventional, i.e original, detailed balance model, developed by Shockley and Queisser to calculate an upper limit for conversion efficiency of silicon p-n junction solar cells, is modified in a simple and an effective way and calculated the conversion efficiency of core/shell QDNC solar cells. Since the existing model relies on the gap energy ($E_g$) of the solar cell, it does not make an estimation about the effect of QDNC materials on the efficiency of the solar cells and gives the same efficiency values for several QDNC solar cells with the same $E_g$. The proposed modification, however, estimates a conversion efficiency in relation to the material properties and also confinement type of the QDNCs. The results of the modified model show that, in contrast to the original one, the conversion efficiencies of different QDNC solar cells, even if they have the same $E_g$, become different depending upon the confinement type and shell material of the core/shell QDNCs and this is crucial in design and fabrication of the new generation solar cells to predict the confinement type and also appropriate QDNC materials for better efficiency. △ Less

Submitted 4 April, 2018; originally announced April 2018.

Comments: 17 pages, 5 figures, Accepted by Journal of Physics: Condensed Matter

Betti numbers for certain Cohen-Macaulay tangent cones

Authors: Mesut Şahin, Nil Şahin

Abstract: In this article, we compute Betti numbers for a Cohen-Macaulay tangent cone of a monomial curve in the affine $4$-space corresponding to a pseudo symmetric numerical semigroup. As a byproduct, we also show that for these semigroups, being of homogeneous type and homogeneous are equivalent properties. In this article, we compute Betti numbers for a Cohen-Macaulay tangent cone of a monomial curve in the affine $4$-space corresponding to a pseudo symmetric numerical semigroup. As a byproduct, we also show that for these semigroups, being of homogeneous type and homogeneous are equivalent properties. △ Less

Submitted 2 October, 2018; v1 submitted 20 March, 2018; originally announced March 2018.

Comments: Bull. Aust. Math. Soc. published online

MSC Class: Primary 13H10; 14H20; Secondary 13P10

Liftings of a monomial curve

Authors: Mesut Şahin

Abstract: We study an operation, that we call lifting, creating non-isomorphic monomial curves from a single monomial curve. Our main result says that all but finitely many liftings of a monomial curve have Cohen-Macaulay tangent cones even if the tangent cone of the original curve is not Cohen-Macaulay. This implies that the Betti sequence of the tangent cone is eventually constant under this operation. Mo… ▽ More We study an operation, that we call lifting, creating non-isomorphic monomial curves from a single monomial curve. Our main result says that all but finitely many liftings of a monomial curve have Cohen-Macaulay tangent cones even if the tangent cone of the original curve is not Cohen-Macaulay. This implies that the Betti sequence of the tangent cone is eventually constant under this operation. Moreover, all liftings have Cohen-Macaulay tangent cones when the original monomial curve has a Cohen-Macaulay tangent cone. In this case, all the Betti sequences are nothing but the Betti sequence of the original curve. △ Less

Submitted 2 October, 2018; v1 submitted 20 March, 2018; originally announced March 2018.

MSC Class: 13A30; 16S36 (primary) 13P10; 13D02; 13C13 (secondary)

Journal ref: Bull. Aust. Math. Soc. 98, 2018, no. 2, 230-238

Core Partitions With d-Distinct Parts

Authors: Murat Sahin

Abstract: In this paper, we study $(s,s+1)$-core partitions with $d$-distinct parts. We obtain results on the number and the largest size of such partitions, so we extend Xiong's paper in which the results are obtained about $(s,s+1)$-core partitions with distinct parts. Also, we propose a conjecture about $(s,s+r)$-core partitions with $d$-distinct parts for $1 \le r \le d$. In this paper, we study $(s,s+1)$-core partitions with $d$-distinct parts. We obtain results on the number and the largest size of such partitions, so we extend Xiong's paper in which the results are obtained about $(s,s+1)$-core partitions with distinct parts. Also, we propose a conjecture about $(s,s+r)$-core partitions with $d$-distinct parts for $1 \le r \le d$. △ Less

Submitted 5 March, 2018; originally announced March 2018.

Comments: 9 pages

MSC Class: 11P81; 05A17

Journal ref: Australasian Journal of Combinatorics, 72(1), 2018, 19-28

The generalized bi-periodic Fibonacci quaternions and octonions

Authors: Elif Tan, Murat Şahin, Semih Yılmaz

Abstract: In this paper, we present a further generalization of the bi- periodic Fibonacci quaternions and octonions. We give the generating function, the Binet formula, and some basic properties of these quaternions and octonions. The results of this paper not only give a generalization of the bi-periodic Fibonacci quaternions and octonions, but also include new results such as the matrix representation an… ▽ More In this paper, we present a further generalization of the bi- periodic Fibonacci quaternions and octonions. We give the generating function, the Binet formula, and some basic properties of these quaternions and octonions. The results of this paper not only give a generalization of the bi-periodic Fibonacci quaternions and octonions, but also include new results such as the matrix representation and the norm value of the generalized bi-periodic Fibonacci quaternions. △ Less

Submitted 16 February, 2018; originally announced February 2018.

Let's be Honest: An Optimal No-Regret Framework for Zero-Sum Games

Authors: Ehsan Asadi Kangarshahi, Ya-Ping Hsieh, Mehmet Fatih Sahin, Volkan Cevher

Abstract: We revisit the problem of solving two-player zero-sum games in the decentralized setting. We propose a simple algorithmic framework that simultaneously achieves the best rates for honest regret as well as adversarial regret, and in addition resolves the open problem of removing the logarithmic terms in convergence to the value of the game. We achieve this goal in three steps. First, we provide a n… ▽ More We revisit the problem of solving two-player zero-sum games in the decentralized setting. We propose a simple algorithmic framework that simultaneously achieves the best rates for honest regret as well as adversarial regret, and in addition resolves the open problem of removing the logarithmic terms in convergence to the value of the game. We achieve this goal in three steps. First, we provide a novel analysis of the optimistic mirror descent (OMD), showing that it can be modified to guarantee fast convergence for both honest regret and value of the game, when the players are playing collaboratively. Second, we propose a new algorithm, dubbed as robust optimistic mirror descent (ROMD), which attains optimal adversarial regret without knowing the time horizon beforehand. Finally, we propose a simple signaling scheme, which enables us to bridge OMD and ROMD to achieve the best of both worlds. Numerical examples are presented to support our theoretical claims and show that our non-adaptive ROMD algorithm can be competitive to OMD with adaptive step-size selection. △ Less

Submitted 6 June, 2018; v1 submitted 12 February, 2018; originally announced February 2018.

Comments: Proceedings of the 35th International Conference on Machine Learning

On parameterised toric codes

Authors: Esma Baran, Mesut Şahin

Abstract: Let $X$ be a complete simplicial toric variety over a finite field with a split torus $T_X$. For any matrix $Q$, we are interested in the subgroup $Y_Q$ of $T_X$ parameterized by the columns of $Q$. We give an algorithm for obtaining a basis for the unique lattice $L$ whose lattice ideal $I_L$ is $I(Y_Q)$. We also give two direct algorithmic methods to compute the order of $Y_Q$, which is the leng… ▽ More Let $X$ be a complete simplicial toric variety over a finite field with a split torus $T_X$. For any matrix $Q$, we are interested in the subgroup $Y_Q$ of $T_X$ parameterized by the columns of $Q$. We give an algorithm for obtaining a basis for the unique lattice $L$ whose lattice ideal $I_L$ is $I(Y_Q)$. We also give two direct algorithmic methods to compute the order of $Y_Q$, which is the length of the corresponding code ${\cC}_{å,Y_Q}$. We share procedures implementing them in \verb|Macaulay2|. Finally, we give a lower bound for the minimum distance of ${\cC}_{å,Y_Q}$, taking advantage of the parametric description of the subgroup $Y_Q$. As an application, we compute the main parameters of the toric codes on Hirzebruch surfaces $\cl H_{\ell}$ generalizing the corresponding result given by Hansen. △ Less

Submitted 22 March, 2021; v1 submitted 12 February, 2018; originally announced February 2018.

Comments: comments wellcome, supported by TUBİTAK

MSC Class: Primary 14M25; 14G50; Secondary 52B20

Toric Codes and Lattice Ideals

Authors: Mesut Şahin

Abstract: Let $X$ be a complete simplicial toric variety over a finite field $\mathbb{F}_q$ with homogeneous coordinate ring $S=\mathbb{F}_q[x_1,\dots,x_r]$ and split torus $T_X\cong (\mathbb{F}^*_q)^n$. We prove that vanishing ideal of a subset $Y$ of the torus $T_X$ is a lattice ideal if and only if $Y$ is a subgroup. We show that these subgroups are exactly those subsets that are parameterized by Laurent… ▽ More Let $X$ be a complete simplicial toric variety over a finite field $\mathbb{F}_q$ with homogeneous coordinate ring $S=\mathbb{F}_q[x_1,\dots,x_r]$ and split torus $T_X\cong (\mathbb{F}^*_q)^n$. We prove that vanishing ideal of a subset $Y$ of the torus $T_X$ is a lattice ideal if and only if $Y$ is a subgroup. We show that these subgroups are exactly those subsets that are parameterized by Laurents monomials. We give an algorithm for determining this parametrization if the subgroup is the zero locus of a lattice ideal in the torus. We also show that vanishing ideals of subgroups of $T_X$ are radical homogeneous lattice ideals of dimension $r-n$. We identify the lattice corresponding to a degenerate torus in $X$ and completely characterize when its lattice ideal is a complete intersection. We compute dimension and length of some generalized toric codes defined on these degenerate tori. △ Less

Submitted 2 October, 2018; v1 submitted 3 December, 2017; originally announced December 2017.

Comments: The author is supported by TÜBİTAK Project No:114F094

MSC Class: Primary 14M25; 14G50; Secondary 52B20

Journal ref: Finite Fields Appl. 52, 2018, 243-260

Gluing semigroups and strongly indispensable free resolutions

Authors: Mesut Şahin, Leah Gold Stella

Abstract: We study strong indispensability of minimal free resolutions of semigroup rings. We focus on two operations, gluing and extending, used in literature to produce more examples with a special property from the existing ones. We give a naive condition to determine whether gluing of two semigroup rings has a strongly indispensable minimal free resolution. As applications, we determine extensions of… ▽ More We study strong indispensability of minimal free resolutions of semigroup rings. We focus on two operations, gluing and extending, used in literature to produce more examples with a special property from the existing ones. We give a naive condition to determine whether gluing of two semigroup rings has a strongly indispensable minimal free resolution. As applications, we determine extensions of $3$-generated non-symmetric, $4$-generated symmetric and pseudo symmetric numerical semigroups as well as obtain infinitely many complete intersection semigroups of any embedding dimension, having strongly indispensable minimal free resolutions. △ Less

Submitted 2 October, 2018; v1 submitted 25 October, 2017; originally announced October 2017.

Comments: Internat. J. Algebra Comput

MSC Class: 13D02; 20M25; 14M25; 13A02

Resonance Production of Excited u-quark at the FCC Based $γがんま$ $p$ Colliders

Authors: Yusuf Oguzhan Günaydın, Mehmet Sahin, Saleh Sultansoy

Abstract: Several Beyond the Standard Model theories are proposed that fermions might have composite substructure. The existence of excited quarks is going to be the noticeable proof for the compositeness of Standard Model fermions. For this reason, excited quarks have been investigated by phenomenological and experimental high energy physicists at various collider options for the last few decades. The Futu… ▽ More Several Beyond the Standard Model theories are proposed that fermions might have composite substructure. The existence of excited quarks is going to be the noticeable proof for the compositeness of Standard Model fermions. For this reason, excited quarks have been investigated by phenomenological and experimental high energy physicists at various collider options for the last few decades. The Future Circular Collider (FCC) has been recently planned as particle accelerator to be established at CERN. Beside the $\sqrt{s}$ = 100 TeV proton-proton collisions, the FCC includes electron-positron and electron-proton collision options. Construction of linear $e^- e^+$ colliders (or dedicated e-linac) tangential to the FCC will afford an opportunity to handle multi-TeV $ep$ and $γがんまp$ collisions. In this respect, we executed a simulation of the resonance production of the excited $u$ quark at the FCC based $γがんまp$ colliders with choosing both the polarized and unpolarized photon beams. The findings revealed that the chirality structure of the $q^*$-$q$-$γがんま$ vertex can be determined by the photon beam polarization. The attainable mass limits of the excited $u$ quark reached the highest values when the polarized photon beam was chosen. In addition, the ultimate compositeness scale values can be handled by appropriate choice of the photon beam polarization. △ Less

Submitted 26 September, 2018; v1 submitted 30 June, 2017; originally announced July 2017.

Comments: 20 pages, 11 figures, 7 tables

Bipolar Neutrosophic Soft Expert Sets

Authors: Mehmet Sahin, Irfan Deli, Vakkas Ulucay

Abstract: In this paper, we define concept of bipolar neutrosophic soft expert set. Also, its basic operations, namely complement, union and intersection. We give examples for these concepts. In this paper, we define concept of bipolar neutrosophic soft expert set. Also, its basic operations, namely complement, union and intersection. We give examples for these concepts. △ Less

Submitted 20 February, 2016; originally announced February 2016.

Performance and optimization of support vector machines in high-energy physics classification problems

Authors: Mehmet Özgür Sahin, Dirk Krücker, Isabell-Alissandra Melzer-Pellmann

Abstract: In this paper we promote the use of Support Vector Machines (SVM) as a machine learning tool for searches in high-energy physics. As an example for a new- physics search we discuss the popular case of Supersymmetry at the Large Hadron Collider. We demonstrate that the SVM is a valuable tool and show that an automated discovery- significance based optimization of the SVM hyper-parameters is a highl… ▽ More In this paper we promote the use of Support Vector Machines (SVM) as a machine learning tool for searches in high-energy physics. As an example for a new- physics search we discuss the popular case of Supersymmetry at the Large Hadron Collider. We demonstrate that the SVM is a valuable tool and show that an automated discovery- significance based optimization of the SVM hyper-parameters is a highly efficient way to prepare an SVM for such applications. A new C++ LIBSVM interface called SVM-HINT is developed and available on Github. △ Less

Submitted 14 January, 2016; v1 submitted 12 January, 2016; originally announced January 2016.

Comments: 20 pages, 6 figures

Report number: DESY 16-004