Showing 1–27 of 27 results for author: Schmid, S

Stress-Dependent Optical Extinction in LPCVD Silicon Nitride Measured by Nanomechanical Photothermal Sensing

Authors: Kostas Kanellopulos, Robert G. West, Stefan Emminger, Paolo Martini, Markus Sauer, Annette Foelske, Silvan Schmid

Abstract: Understanding optical absorption in silicon nitride is crucial for cutting-edge technologies like photonic integrated circuits, nanomechanical photothermal infrared sensing and spectroscopy, and cavity optomechanics. Yet, the origin of its strong dependence on film deposition and fabrication process is not fully understood. This Letter leverages nanomechanical photothermal sensing to investigate o… ▽ More Understanding optical absorption in silicon nitride is crucial for cutting-edge technologies like photonic integrated circuits, nanomechanical photothermal infrared sensing and spectroscopy, and cavity optomechanics. Yet, the origin of its strong dependence on film deposition and fabrication process is not fully understood. This Letter leverages nanomechanical photothermal sensing to investigate optical extinction $κかっぱ_{\mathrm{ext}}$ at 632.8 nm wavelength in LPCVD SiN strings across a wide range of deposition-related tensile stresses ($200-850$ MPa). Measurements reveal a reduction in $κかっぱ_{\mathrm{ext}}$ from 10$^3$ to 10$^1$ ppm with increasing stress, correlated to variations in Si/N content ratio. Within the band-fluctuations framework, this trend indicates an increase of the energy bandgap with the stress, ultimately reducing absorption. Overall, this study showcases the power and simplicity of nanomechanical photothermal sensing for low absorption measurements, offering a sensitive, scattering-free platform for material analysis in nanophotonics and nanomechanics. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: Main text: 7 pages, 3 figures, 1 table Supporting Information: 4 pages, 4 figures, 1 table

Picosecond Femtojoule Resistive Switching in Nanoscale VO$_{2}$ Memristors

Authors: S. W. Schmid, L. Pósa, T. N. Török, B. Sánta, Z. Pollner, G. Molnár, Y. Horst, J. Volk, J. Leuthold, A. Halbritter, M. Csontos

Abstract: Beyond-Moore computing technologies are expected to provide a sustainable alternative to the von Neumann approach not only due to their down-scaling potential but also via exploiting device-level functional complexity at the lowest possible energy consumption. The dynamics of the Mott transition in correlated electron oxides, such as vanadium dioxide, has been identified as a rich and reliable sou… ▽ More Beyond-Moore computing technologies are expected to provide a sustainable alternative to the von Neumann approach not only due to their down-scaling potential but also via exploiting device-level functional complexity at the lowest possible energy consumption. The dynamics of the Mott transition in correlated electron oxides, such as vanadium dioxide, has been identified as a rich and reliable source of such functional complexity. However, its full potential in high-speed and low-power operation has been largely unexplored. We fabricated nanoscale VO$_{2}$ devices embedded in a broad-band test circuit to study the speed and energy limitations of their resistive switching operation. Our picosecond time-resolution, real-time resistive switching experiments and numerical simulations demonstrate that tunable low-resistance states can be set by the application of 20~ps long, $<$1.7~V amplitude voltage pulses at 15~ps incubation times and switching energies starting from a few femtojoule. Moreover, we demonstrate that at nanometer-scale device sizes not only the electric field induced insulator-to-metal transition, but also the thermal conduction limited metal-to-insulator transition can take place at timescales of 100's of picoseconds. These orders of magnitude breakthroughs open the route to the design of high-speed and low-power dynamical circuits for a plethora of neuromorphic computing applications from pattern recognition to numerical optimization. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Coexistence of Topological and Normal Insulating Phases in Electro-Optically Tuned InAs/GaSb Bilayer Quantum Wells

Authors: Manuel Meyer, Tobias Fähndrich, Sebastian Schmid, Adriana Wolf, Sergey Krishtopenko, Benoit Jouault, Gerald Bastard, Frederic Teppe, Fabian Hartmann, Sven Höfling

Abstract: We report on the coexistence of both normal and topological insulating phases in InAs/GaSb bilayer quantum well induced by the built-in electric field tuned optically and electrically. The emergence of topological and normal insulating phases is assessed based on the evolution of the charge carrier densities, the resistivity dependence of the gap via in-plane magnetic fields and the thermal activa… ▽ More We report on the coexistence of both normal and topological insulating phases in InAs/GaSb bilayer quantum well induced by the built-in electric field tuned optically and electrically. The emergence of topological and normal insulating phases is assessed based on the evolution of the charge carrier densities, the resistivity dependence of the gap via in-plane magnetic fields and the thermal activation of carriers. For the Hall bar device tuned optically, we observe the fingerprints associated with the presence of only the topological insulating phase. For another Hall bar processed identically but with an additional top gate, the coexistence of normal and topological insulating phases is found by electrical tuning. Our finding paves the way for utilizing a new electro-optical tuning scheme to manipulate InAs/GaSb bilayer quantum wells to obtain trivial-topological insulating interfaces in the bulk rather than at the physical edge of the device. △ Less

Submitted 22 January, 2024; originally announced January 2024.

A numerical approach for calculating exact non-adiabatic terms in quantum dynamics

Authors: Ewen D C Lawrence, Sebastian F J Schmid, Ieva Čepaitė, Peter Kirton, Callum W Duncan

Abstract: Understanding how non-adiabatic terms affect quantum dynamics is fundamental to improving various protocols for quantum technologies. We present a novel approach to computing the Adiabatic Gauge Potential (AGP), which gives information on the non-adiabatic terms that arise from time dependence in the Hamiltonian. Our approach uses commutators of the Hamiltonian to build up an appropriate basis of… ▽ More Understanding how non-adiabatic terms affect quantum dynamics is fundamental to improving various protocols for quantum technologies. We present a novel approach to computing the Adiabatic Gauge Potential (AGP), which gives information on the non-adiabatic terms that arise from time dependence in the Hamiltonian. Our approach uses commutators of the Hamiltonian to build up an appropriate basis of the AGP, which can be easily truncated to give an approximate form when the exact result is intractable. We use this approach to study the AGP obtained for the transverse field Ising model on a variety of graphs, showing how the different underlying graph structures can give rise to very different scaling for the number of terms required in the AGP. △ Less

Submitted 19 January, 2024; originally announced January 2024.

Comments: 28 pages, 6 figures, comments welcome

Slow and Non-Equilibrium Dynamics due to Electronic Ferroelectricity in a Strongly-Correlated Molecular Conductor

Authors: Tatjana Thomas, Yassine Agarmani, Steffi Hartmann, Mark Kartsovnik, Natalia Kushch, Stephen M. Winter, Sebastian Schmid, Peter Lunkenheimer, Michael Lang, Jens Mueller

Abstract: Using a combination of resistance fluctuation (noise) and dielectric spectroscopy we investigate the nature of relaxor-type electronic ferroelectricity in the organic conductor $κかっぱ$-(BETS)$_2$Mn[N(CN)$_2$]$_3$, a system representative for a wider class of materials, where strong correlations of electrons on a lattice of dimerized molecules results in an insulating ground state. The two complementar… ▽ More Using a combination of resistance fluctuation (noise) and dielectric spectroscopy we investigate the nature of relaxor-type electronic ferroelectricity in the organic conductor $κかっぱ$-(BETS)$_2$Mn[N(CN)$_2$]$_3$, a system representative for a wider class of materials, where strong correlations of electrons on a lattice of dimerized molecules results in an insulating ground state. The two complementary spectroscopies reveal a distinct low-frequency dynamics. By dielectric spectroscopy we detect an intrinsic relaxation that is typical for relaxor ferroelectrics below the metal-to-insulator transition at $T_{\rm{MI}}\sim 25\,$K. Resistance noise spectroscopy reveals fluctuating two-level processes above $T_{\rm MI}$ which strongly couple to the applied electric field, a signature of fluctuating polar nanoregions (PNR), i.e. clusters of quantum electric dipoles fluctuating collectively. The PNR preform above the metal insulator transition. Upon cooling through $T_{\rm MI}$, a drastic increase of the low-frequency $1/f$-type fluctuations and slowing down of the charge carrier dynamics is accompanied by the onset of strong non-equilibrium dynamics indicating a glassy transition of interacting dipolar clusters, the scaling properties of which are consistent with a droplet model. The freezing of nano-scale polar clusters and non-equilibrium dynamics is suggested to be a common feature of organic relaxor-type electronic ferroelectrics and needs to be considered in theoretical models describing these materials. △ Less

Submitted 3 November, 2023; v1 submitted 26 October, 2023; originally announced October 2023.

Photothermal Microscopy & Spectroscopy with Nanomechanical Resonators

Authors: Robert G. West, Kostas Kanellopulos, Silvan Schmid

Abstract: In nanomechanical photothermal absorption spectroscopy and microscopy, the measured substance becomes a part of the detection system itself, inducing a nanomechanical resonance frequency shift upon thermal relaxation. Suspended, nanometer-thin ceramic or 2D material resonators are innately highly-sensitive thermal detectors of localized heat exchanges from substances on their surface or integrated… ▽ More In nanomechanical photothermal absorption spectroscopy and microscopy, the measured substance becomes a part of the detection system itself, inducing a nanomechanical resonance frequency shift upon thermal relaxation. Suspended, nanometer-thin ceramic or 2D material resonators are innately highly-sensitive thermal detectors of localized heat exchanges from substances on their surface or integrated into the resonator itself. Consequently, the combined nanoresonator-analyte system is a self-measuring spectrometer and microscope: responding to a substances transfer of heat over the entire spectrum for which it absorbs, according to the intensity it experiences. Limited by their own thermostatistical fluctuation phenomena, nanoresonators have demonstrated sufficient sensitivity for measuring trace analyte as well as single particles and molecules with incoherent light or focused and unfocused coherent light. They are versatile in their design, support various sampling methods and hyphenation with other spectroscopic methods, and are capable in a wide range of applications including fingerprinting, separation science, and surface sciences. △ Less

Submitted 29 June, 2023; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: perspective article, 23 pages with references, 7 figures

Nanomechanical Photothermal Near Infrared Spectromicroscopy of Individual Nanorods

Authors: Kostas Kanellopulos, Robert G. West, Silvan Schmid

Abstract: Understanding light-matter interaction at the nanoscale requires probing the optical properties of matter at the individual nano-absorber level. To this end, we have developed a nanomechanical photothermal sensing platform that can be used as a full spectromicroscopy tool for single molecule and single particle analysis. As a demonstration, the absorption cross-section of individual gold nanorods… ▽ More Understanding light-matter interaction at the nanoscale requires probing the optical properties of matter at the individual nano-absorber level. To this end, we have developed a nanomechanical photothermal sensing platform that can be used as a full spectromicroscopy tool for single molecule and single particle analysis. As a demonstration, the absorption cross-section of individual gold nanorods is resolved from the spectroscopic and polarization standpoint. By exploiting the capabilities of nanomechanical photothermal spectromicroscopy, the longitudinal localized surface plasmon resonance (LSPR) in the NIR range is unravelled and quantitatively characterized. The polarization features of the transversal surface plasmon resonance (TSPR) in the VIS range are also analyzed. The measurements are compared with the finite element method (FEM), elucidating the role played by electron-surface and bulk scattering in these plasmonic nanostructures, as well as the interaction between the nano-absorber and the nanoresonator, ultimately resulting in absorption strength modulation. Finally, a comprehensive comparison is conducted, evaluating the signal-to-noise ratio of nanomechanical photothermal spectromicroscopy against other cutting-edge single molecule and particle spectroscopy techniques. This analysis highlights the remarkable potential of nanomechanical photothermal spectromicroscopy due to its exceptional sensitivity. △ Less

Submitted 5 July, 2023; v1 submitted 9 May, 2023; originally announced May 2023.

Nanomechanical absorption spectroscopy of 2D materials with femtowatt sensitivity

Authors: Jan N. Kirchhof, Yuefeng Yu, Denis Yagodkin, Nele Stetzuhn, Daniel B. de Araújo, Kostas Kanellopulos, Samuel Manas-Valero, Eugenio Coronado, Herre van der Zant, Stephanie Reich, Silvan Schmid, Kirill I. Bolotin

Abstract: Nanomechanical spectroscopy (NMS) is a recently developed approach to determine optical absorption spectra of nanoscale materials via mechanical measurements. It is based on measuring changes in the resonance frequency of a membrane resonator vs. the photon energy of incoming light. This method is a direct measurement of absorption, which has practical advantages compared to common optical spectro… ▽ More Nanomechanical spectroscopy (NMS) is a recently developed approach to determine optical absorption spectra of nanoscale materials via mechanical measurements. It is based on measuring changes in the resonance frequency of a membrane resonator vs. the photon energy of incoming light. This method is a direct measurement of absorption, which has practical advantages compared to common optical spectroscopy approaches. In the case of two-dimensional (2D) materials, NMS overcomes limitations inherent to conventional optical methods, such as the complications associated with measurements at high magnetic fields and low temperatures. In this work, we develop a protocol for NMS of 2D materials that yields two orders of magnitude improved sensitivity compared to previous approaches, while being simpler to use. To this end, we use electrical sample actuation, which simplifies the experiment and provides a reliable calibration for greater accuracy. Additionally, the use of low-stress silicon nitride membranes as our substrate reduces the noise-equivalent power to $NEP = 890 fW/\sqrt{Hz}$, comparable to commercial semiconductor photodetectors. We use our approach to spectroscopically characterize a two-dimensional transition metal dichalcogenide (WS$_2$), a layered magnetic semiconductor (CrPS$_4$), and a plasmonic supercrystal consisting of gold nanoparticles. △ Less

Submitted 28 January, 2023; originally announced January 2023.

Voltage control of the quantum scattering time in InAs/GaSb/InAs trilayer quantum wells

Authors: M. Meyer, S. Schmid, F. Jabeen, G. Bastard, F. Hartmann, S. Höfling

Abstract: We study the evolution of the quantum scattering time by gate voltage training in the topological insulator based on InAs/GaSb/InAs trilayer quantum wells. Depending on the minimal gate voltage applied during a gate voltage sweep cycle, the quantum scattering time can be improved by 50 % from 0.08 ps to 0.12 ps albeit the transport scattering time is rather constant around 1.0 ps. The ratio of the… ▽ More We study the evolution of the quantum scattering time by gate voltage training in the topological insulator based on InAs/GaSb/InAs trilayer quantum wells. Depending on the minimal gate voltage applied during a gate voltage sweep cycle, the quantum scattering time can be improved by 50 % from 0.08 ps to 0.12 ps albeit the transport scattering time is rather constant around 1.0 ps. The ratio of the quantum scattering time versus transport scattering time scales linearly with the charge carrier density and varies from 10 to 30, indicating Coulombic scattering as the dominant scattering mechanism. Our findings may enable to improve the residual bulk conductivity issue and help in observing helical edge channels in topological insulators based on InAs/GaSb quantum well heterostructures even for macroscopic devices. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Structure and relaxor ferroelectric behavior of novel tungsten bronze type ceramic, Sr5BiTi3Nb7O30

Authors: Qiuwei He, Siegbert Schmid, Xue Chen, Biaolin Peng, ChunChun Li, Changzheng Hu, Laijun Liu, Manuel Hinterstein

Abstract: A novel lead-free tungsten bronze type ceramic Sr5BiTi3Nb7O30, was prepared by a conventional solid-state reaction route. The room-temperature crystal structure shows an average structure with centro-symmetric space group P4/mbm identified by synchrotron XRD. Temperature dependence of dielectric permittivity indicates that Sr5BiTi3Nb7O30 is a ferroelectric relaxor with Tm near 260 K. The ceramic d… ▽ More A novel lead-free tungsten bronze type ceramic Sr5BiTi3Nb7O30, was prepared by a conventional solid-state reaction route. The room-temperature crystal structure shows an average structure with centro-symmetric space group P4/mbm identified by synchrotron XRD. Temperature dependence of dielectric permittivity indicates that Sr5BiTi3Nb7O30 is a ferroelectric relaxor with Tm near 260 K. The ceramic displays stronger frequency dispersion and lower phase-transition temperature compared with Sr6Ti2Nb8O30. A macroscopic and phenomenological statistical model was employed to describe the temperature dependence of their dielectric responses. The calculated size of polar nanoregions (PNRs) of Sr5BiTi3Nb7O30 compared with Sr6Ti2Nb8O30 implies that the stronger diffusion phase transition for the former is related to the disorder emerged in both A and B sites. The smaller PNRs can be activated at lower temperature but have smaller electrical dipole moment. This is the origin of relaxor behavior of Sr5BiTi3Nb7O30 with lower Tm and dielectric permittivity. The PNRs is related to a local structure with a polar space group P4bm, which contributes to the dielectric frequency dispersion of relaxor behavior. This work opens up a promising feasible route to the development of relaxor ferroelectrics in tungsten bronze type oxides. △ Less

Submitted 5 January, 2022; v1 submitted 4 January, 2022; originally announced January 2022.

Comments: 21 pages, 9 figures

Frequency fluctuations in nanomechanical silicon nitride string resonators

Authors: Pedram Sadeghi, Alper Demir, Luis Guillermo Villanueva, Hendrik Kähler, Silvan Schmid

Abstract: High quality factor ($Q$) nanomechanical resonators have received a lot of attention for sensor applications with unprecedented sensitivity. Despite the large interest, few investigations into the frequency stability of high-$Q$ resonators have been reported. Such resonators are characterized by a linewidth significantly smaller than typically employed measurement bandwidths, which is the opposite… ▽ More High quality factor ($Q$) nanomechanical resonators have received a lot of attention for sensor applications with unprecedented sensitivity. Despite the large interest, few investigations into the frequency stability of high-$Q$ resonators have been reported. Such resonators are characterized by a linewidth significantly smaller than typically employed measurement bandwidths, which is the opposite regime to what is normally considered for sensors. Here, the frequency stability of high-$Q$ silicon nitride string resonators is investigated both in open-loop and closed-loop configurations. The stability is here characterized using the Allan deviation. For open-loop tracking, it is found that the Allan deviation gets separated into two regimes, one limited by the thermomechanical noise of the resonator and the other by the detection noise of the optical transduction system. The point of transition between the two regimes is the resonator response time, which can be shown to have a linear dependence on $Q$. Laser power fluctuations from the optical readout is found to present a fundamental limit to the frequency stability. Finally, for closed-loop measurements, the response time is shown to no longer be intrinsically limited but instead given by the bandwidth of the closed-loop tracking system. Computed Allan deviations based on theory are given as well and found to agree well with the measurements. These results are of importance for the understanding of fundamental limitations of high-$Q$ resonators and their application as high performance sensors. △ Less

Submitted 25 September, 2020; originally announced September 2020.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. B 102, 214106 (2020)

Thermal transport and frequency response of localized modes on low-stress nanomechanical silicon nitride drums featuring a phononic bandgap structure

Authors: Pedram Sadeghi, Manuel Tanzer, Niklas Luhmann, Markus Piller, Miao-Hsuan Chien, Silvan Schmid

Abstract: Development of broadband thermal sensors for the detection of, among others, radiation, single nanoparticles, or single molecules is of great interest. In recent years, photothermal spectroscopy based on the shift of the resonance frequency of stressed nanomechanical resonators has been successfully demonstrated. Here, we show the application of soft-clamped phononic crystal membranes made of sili… ▽ More Development of broadband thermal sensors for the detection of, among others, radiation, single nanoparticles, or single molecules is of great interest. In recent years, photothermal spectroscopy based on the shift of the resonance frequency of stressed nanomechanical resonators has been successfully demonstrated. Here, we show the application of soft-clamped phononic crystal membranes made of silicon nitride as thermal sensors. It is experimentally demonstrated how a quasi-bandgap remains even at very low tensile stress, in agreement with finite element method simulations. An increase of the relative responsivity of the fundamental defect mode is found when compared to that of uniform square membranes of equal size, with enhancement factors as large as an order of magnitude. We then show phononic crystals engineered inside nanomechanical trampolines, which results in additional reduction of the tensile stress and increased thermal isolation, resulting in further enhancement of the responsivity. Finally, defect mode and bandgap tuning is shown by laser heating of the defect to the point where the fundamental defect mode completely leaves the bandgap. △ Less

Submitted 21 May, 2020; originally announced May 2020.

Journal ref: Phys. Rev. Applied 14, 024068 (2020)

Ultrathin 2 nm gold as ideal impedance-matched absorber for infrared light

Authors: Niklas Luhmann, Dennis Høj, Markus Piller, Hendrik Kähler, Miao-Hsuan Chien, Robert G. West, Ulrik Lund Andersen, Silvan Schmid

Abstract: Thermal detectors are a cornerstone of infrared (IR) and terahertz (THz) technology due to their broad spectral range. These detectors call for suitable broad spectral absorbers with minimalthermal mass. Often this is realized by plasmonic absorbers, which ensure a high absorptivity butonly for a narrow spectral band. Alternativly, a common approach is based on impedance-matching the sheet resista… ▽ More Thermal detectors are a cornerstone of infrared (IR) and terahertz (THz) technology due to their broad spectral range. These detectors call for suitable broad spectral absorbers with minimalthermal mass. Often this is realized by plasmonic absorbers, which ensure a high absorptivity butonly for a narrow spectral band. Alternativly, a common approach is based on impedance-matching the sheet resistance of a thin metallic film to half the free-space impedance. Thereby, it is possible to achieve a wavelength-independent absorptivity of up to 50 %, depending on the dielectric properties of the underlying substrate. However, existing absorber films typicallyrequire a thickness of the order of tens of nanometers, such as titanium nitride (14 nm), whichcan significantly deteriorate the response of a thermal transducers. Here, we present the application of ultrathin gold (2 nm) on top of a 1.2 nm copper oxide seed layer as an effective IR absorber. An almost wavelength-independent and long-time stable absorptivity of 47(3) %, ranging from 2 $μみゅー$m to 20 $μみゅー$m, could be obtained and is further discussed. The presented gold thin-film represents analmost ideal impedance-matched IR absorber that allows a significant improvement of state-of-the-art thermal detector technology. △ Less

Submitted 29 November, 2019; originally announced November 2019.

Influence of clamp-widening on the quality factor of nanomechanical silicon nitride resonators

Authors: Pedram Sadeghi, Manuel Tanzer, Simon L. Christensen, Silvan Schmid

Abstract: Nanomechanical resonators based on strained silicon nitride (Si$_3$N$_4$) have received a large amount of attention in fields such as sensing and quantum optomechanics due to their exceptionally high quality factors ($Q$s). Room-temperature $Q$s approaching 1 billion are now in reach by means of phononic crystals (soft-clamping) and strain engineering. Despite great progress in enhancing $Q$s, dif… ▽ More Nanomechanical resonators based on strained silicon nitride (Si$_3$N$_4$) have received a large amount of attention in fields such as sensing and quantum optomechanics due to their exceptionally high quality factors ($Q$s). Room-temperature $Q$s approaching 1 billion are now in reach by means of phononic crystals (soft-clamping) and strain engineering. Despite great progress in enhancing $Q$s, difficulties in fabrication of soft-clamped samples limits their implementation into actual devices. An alternative means of achieving ultra-high $Q$s was shown using trampoline resonators with engineered clamps, which serves to localize the stress to the center of the resonator, while minimizing stress at the clamping. The effectiveness of this approach has since come into question from recent studies employing string resonators with clamp-tapering. Here, we investigate this idea using nanomechanical string resonators with engineered clampings similar to those presented for trampolines. Importantly, the effect of orienting the strings diagonally or perpendicularly with respect to the silicon frame is investigated. It is found that increasing the clamp width for diagonal strings slightly increases the $Q$s of the fundamental out-of-plane mode at small radii, while perpendicular strings only deteriorate with increasing clamp width. Measured $Q$s agree well with finite element method simulations even for higher-order resonances. The small increase cannot account for previously reported $Q$s of trampoline resonators. Instead, we propose the effect to be intrinsic and related to surface and radiation losses. △ Less

Submitted 28 May, 2019; v1 submitted 16 May, 2019; originally announced May 2019.

Comments: 7 pages, 4 figures

MSC Class: 74B10

Effect of oxygen plasma on nanomechanical silicon nitride resonators

Authors: Niklas Luhmann, Artur Jachimowicz, Johannes Schalko, Pedram Sadeghi, Markus Sauer, Annette Foelske-Schmitz, Silvan Schmid

Abstract: Precise control of tensile stress and intrinsic damping is crucial for the optimal design of nanomechanical systems for sensor applications and quantum optomechanics in particular. In this letter we study the in uence of oxygen plasma on the tensile stress and intrinsic damping of nanomechanical silicon nitride resonators. Oxygen plasma treatments are common steps in micro and nanofabrication. We… ▽ More Precise control of tensile stress and intrinsic damping is crucial for the optimal design of nanomechanical systems for sensor applications and quantum optomechanics in particular. In this letter we study the in uence of oxygen plasma on the tensile stress and intrinsic damping of nanomechanical silicon nitride resonators. Oxygen plasma treatments are common steps in micro and nanofabrication. We show that oxygen plasma of only a few minutes oxidizes the silicon nitride surface, creating several nanometer thick silicon dioxide layers with a compressive stress of 1.30(16)GPa. Such oxide layers can cause a reduction of the e ective tensile stress of a 50 nm thick stoichiometric silicon nitride membrane by almost 50%. Additionally, intrinsic damping linearly increases with the silicon dioxide lm thickness. An oxide layer of 1.5nm grown in just 10s in a 50W oxygen plasma almost doubled the intrinsic damping. The oxide surface layer can be e ciently removed in bu ered HF. △ Less

Submitted 9 June, 2017; originally announced June 2017.

Striped Magnetic Ground State of the Kagome Lattice in Fe4Si2Sn7O16

Authors: C. D. Ling, M. C. Allison, S. Schmid, M. Adveev, J. S. Gardner, C. -W. Wang, D. H. Ryan, M. Zbiri, T. Soehnel

Abstract: We have experimentally identified a new magnetic ground state for the kagome lattice, in the perfectly hexagonal Fe2+ (3d6, S = 2) compound Fe4Si2Sn7O16. Representational symmetry analysis of neutron diffraction data shows that below T_N = 3.5 K, the spins on 2/3 of the magnetic ions order into canted antiferromagnetic chains, separated by the remaining 1/3 which are geometrically frustrated and s… ▽ More We have experimentally identified a new magnetic ground state for the kagome lattice, in the perfectly hexagonal Fe2+ (3d6, S = 2) compound Fe4Si2Sn7O16. Representational symmetry analysis of neutron diffraction data shows that below T_N = 3.5 K, the spins on 2/3 of the magnetic ions order into canted antiferromagnetic chains, separated by the remaining 1/3 which are geometrically frustrated and show no long-range order down to at least T = 0.1 K. Moessbauer spectroscopy confirms that there is no static order on the latter 1/3 of the magnetic ions - i.e., they are in a liquid-like rather than a frozen state - down to at least 1.65 K. A heavily Mn-doped sample Fe1.45Mn2.55Si2Sn7O16 has the same magnetic structure. Although the propagation vector q = (0, 1/2 , 1/2 ) breaks hexagonal symmetry, we see no evidence for magnetostriction in the form of a lattice distortion within the resolution of our data. We discuss the relationship to partially frustrated magnetic order on the pyrochlore lattice of Gd2Ti2O7, and to theoretical models that predict symmetry breaking ground states for perfect kagome lattices. △ Less

Submitted 27 October, 2017; v1 submitted 24 March, 2017; originally announced March 2017.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. B 96, 180410 (2017)

Position and Mode Dependent Optical Detection Back-Action in Cantilever Beam Resonators

Authors: T. Larsen. S. Schmid, S. Dohn, J. E. Sader, A. Boisen, L. G. Villanueva

Abstract: Optical detection back-action in cantilever resonant or static detection presents a challenge when striving for state-of-the-art performance. The origin and possible routes for minimizing optical back-action have received little attention in literature. Here, we investigate the position and mode dependent optical back-action on cantilever beam resonators. A high power heating laser (100 μみゅーW) is sca… ▽ More Optical detection back-action in cantilever resonant or static detection presents a challenge when striving for state-of-the-art performance. The origin and possible routes for minimizing optical back-action have received little attention in literature. Here, we investigate the position and mode dependent optical back-action on cantilever beam resonators. A high power heating laser (100 μみゅーW) is scanned across a silicon nitride cantilever while its effect on the first three resonance modes is detected via a low-power readout laser (1 μみゅーW) positioned at the cantilever tip. We find that the measured effect of back-action is not only dependent on position but also the shape of the resonance mode. Relevant silicon nitride material parameters are extracted by fitting the temperature-dependent frequency response of the first three modes to finite element (FE) simulations. In a second round of simulations, using the extracted parameters, we successfully fit the FEM results with the measured mode and position dependent back-action. Finally, different routes for minimizing the effect of this optical detection back-action are described, allowing further improvements of cantilever-based sensing in general. △ Less

Submitted 23 February, 2017; originally announced February 2017.

Journal ref: J. Micromech. Microeng. 27 035006 (2017)

Evidence of surface loss as ubiquitous limiting damping mechanism in SiN micro- and nanomechanical resonators

Authors: Luis Guillermo Villanueva, Silvan Schmid

Abstract: Silicon nitride (SiN) micro- and nanomechanical resonators have attracted a lot of attention in various research fields due to their exceptionally high quality factors ($Q$s). Despite their popularity, the origin of the limiting loss mechanisms in these structures has remained controversial. In this paper we propose an analytical model combining acoustic radiation loss with intrinsic loss. The mod… ▽ More Silicon nitride (SiN) micro- and nanomechanical resonators have attracted a lot of attention in various research fields due to their exceptionally high quality factors ($Q$s). Despite their popularity, the origin of the limiting loss mechanisms in these structures has remained controversial. In this paper we propose an analytical model combining acoustic radiation loss with intrinsic loss. The model accurately predicts the resulting mode-dependent $Q$s of a low-stress silicon-rich and a high-stress stoichiometric SiN membrane. The large acoustic mismatch of the low-stress membrane to the substrate seems to minimize radiation loss and $Q$s of higher modes ($n \wedge m \geq 3$) are limited by intrinsic losses. The study of these intrinsic losses in low-stress membranes with varying lengths $L$ and thicknesses $h$ reveals an inverse linear dependence of the intrinsic loss with $h$ for thin resonators independent of $L$. This finding was confirmed by comparing the intrinsic dissipation of arbitrary (membranes, strings, and cantilevers) SiN resonators extracted from literature, suggesting surface loss as ubiquitous damping mechanism in thin SiN resonators with $Q_{surf} = βべーた\cdot h$ and $βべーた= 6\times10^{10} \pm4\times 10^{10}$~m$^{-1}$. Based on the intrinsic loss the maximal achievable $Q$s and $Q\cdot f$ products for SiN membranes and strings are outlined. △ Less

Submitted 18 June, 2014; v1 submitted 23 May, 2014; originally announced May 2014.

Non-linear optomechanical measurement of mechanical motion

Authors: G. A. Brawley, M. R. Vanner, P. E. Larsen, S. Schmid, A. Boisen, W. P. Bowen

Abstract: Precision measurement of non-linear observables is an important goal in all facets of quantum optics. This allows measurement-based non-classical state preparation, which has been applied to great success in various physical systems, and provides a route for quantum information processing with otherwise linear interactions. In cavity optomechanics much progress has been made using linear interacti… ▽ More Precision measurement of non-linear observables is an important goal in all facets of quantum optics. This allows measurement-based non-classical state preparation, which has been applied to great success in various physical systems, and provides a route for quantum information processing with otherwise linear interactions. In cavity optomechanics much progress has been made using linear interactions and measurement, but observation of non-linear mechanical degrees-of-freedom remains outstanding. Here we report the observation of displacement-squared thermal motion of a micro-mechanical resonator by exploiting the intrinsic non-linearity of the radiation pressure interaction. Using this measurement we generate bimodal mechanical states of motion with separations and feature sizes well below 100~pm. Future improvements to this approach will allow the preparation of quantum superposition states, which can be used to experimentally explore collapse models of the wavefunction and the potential for mechanical-resonator-based quantum information and metrology applications. △ Less

Submitted 19 October, 2017; v1 submitted 23 April, 2014; originally announced April 2014.

Comments: 8 pages, 4 figures, extensive supplementary material available with published version

Journal ref: Nature Communications 7, 10988 (2016)

Demonstration of suppressed phonon tunneling losses in phononic bandgap shielded membrane resonators for high-Q optomechanics

Authors: Yeghishe Tsaturyan, Andreas Barg, Anders Simonsen, Luis Guillermo Villanueva, Silvan Schmid, Albert Schliesser, Eugene S. Polzik

Abstract: Dielectric membranes with exceptional mechanical and optical properties present one of the most promising platforms in quantum opto-mechanics. The performance of stressed silicon nitride nanomembranes as mechanical resonators notoriously depends on how their frame is clamped to the sample mount, which in practice usually necessitates delicate, and difficult-to-reproduce mounting solutions. Here, w… ▽ More Dielectric membranes with exceptional mechanical and optical properties present one of the most promising platforms in quantum opto-mechanics. The performance of stressed silicon nitride nanomembranes as mechanical resonators notoriously depends on how their frame is clamped to the sample mount, which in practice usually necessitates delicate, and difficult-to-reproduce mounting solutions. Here, we demonstrate that a phononic bandgap shield integrated in the membrane's silicon frame eliminates this dependence, by suppressing dissipation through phonon tunneling. We dry-etch the membrane's frame so that it assumes the form of a $\mathrm{cm}$-sized bridge featuring a 1-dimensional periodic pattern, whose phononic density of states is tailored to exhibit one, or several, full band gaps around the membrane's high-$Q$ modes in the MHz-range. We quantify the effectiveness of this phononic bandgap shield by optical interferometry measuring both the suppressed transmission of vibrations, as well as the influence of frame clamping conditions on the membrane modes. We find suppressions up to $40~\mathrm{dB}$ and, for three different realized phononic structures, consistently observe significant suppression of the dependence of the membrane's modes on sample clamping - if the mode's frequency lies in the bandgap. As a result, we achieve membrane mode quality factors of $5\times 10^{6}$ with samples that are tightly bolted to the $8~\mathrm{K}$-cold finger of a cryostat. $Q\times f$-products of $6\times 10^{12}~\mathrm{Hz}$ at $300~\mathrm{K}$ and $14\times 10^{12}~\mathrm{Hz}$ at $8~\mathrm{K}$ are observed, satisfying one of the main requirements for optical cooling of mechanical vibrations to their quantum ground-state. △ Less

Submitted 30 December, 2013; originally announced December 2013.

Comments: 12 pages, 9 figures

Journal ref: Optics Express, Vol. 22, Issue 6, pp. 6810-6821 (2014)

Low-power photothermal probing of single plasmonic nanostructures with nanomechanical string resonators

Authors: Silvan Schmid, Kaiyu Wu, Peter Emil Larsen, Tomas Rindzevicius, Anja Boisen

Abstract: We demonstrate the direct photothermal probing and mapping of single plasmonic nanostructures via the temperature induced detuning of nanomechanical string resonators. Single Au nanoslits are illuminated with a low-power polarized focused laser beam (λらむだ = 633 nm). Polarization dependent heat generation in gold nanoslits is then imaged with high sensitivity. A sensitivity of -4.1 ppm/nW with respect… ▽ More We demonstrate the direct photothermal probing and mapping of single plasmonic nanostructures via the temperature induced detuning of nanomechanical string resonators. Single Au nanoslits are illuminated with a low-power polarized focused laser beam (λらむだ = 633 nm). Polarization dependent heat generation in gold nanoslits is then imaged with high sensitivity. A sensitivity of -4.1 ppm/nW with respect to the illuminated light (beam diameter 5.0pm0.8 μみゅーm) is determined for a single nanoslit (1 μみゅーm long and 53 nm wide), which equals to a total light absorption of 16%. This results in a heating of 0.5 K for an illuminance of 8 nW/μみゅーm2. Our results show that nanomechanical resonators are a unique and robust analysis tool for the low-power investigation of thermoplasmonic effects in plasmonic hot spots. △ Less

Submitted 17 December, 2013; originally announced December 2013.

Graphene on silicon nitride for optoelectromechanical micromembrane resonators

Authors: Silvan Schmid, Tolga Bagci, Emil Zeuthen, Jacob M. Taylor, Patrick K. Herring, Maja C. Cassidy, Charles M. Marcus, Luis Guillermo Villanueva, Bartolo Amato, Anja Boisen, Yong Cheol Shin, Jing Kong, Anders S. Sørensen, Koji Usami, Eugene S. Polzik

Abstract: Due to their exceptional mechanical and optical properties, dielectric silicon nitride (SiN) micromembrane resonators have become the centerpiece of many optomechanical experiments. Efficient capacitive coupling of the membrane to an electrical system would facilitate exciting hybrid optoelectromechanical devices. However, capacitive coupling of such dielectric membranes is rather weak. Here we ad… ▽ More Due to their exceptional mechanical and optical properties, dielectric silicon nitride (SiN) micromembrane resonators have become the centerpiece of many optomechanical experiments. Efficient capacitive coupling of the membrane to an electrical system would facilitate exciting hybrid optoelectromechanical devices. However, capacitive coupling of such dielectric membranes is rather weak. Here we add a single layer of graphene on SiN micromembranes and compare electromechanical coupling and mechanical properties to bare dielectric membranes and to membranes metallized with an aluminium layer. The electrostatic coupling of graphene coated membranes is found to be equal to a perfectly conductive membrane. Our results show that a single layer of graphene substantially enhances the electromechanical capacitive coupling without significantly adding mass, decreasing the superior mechanical quality factor or affecting the optical properties of SiN micromembrane resonators. △ Less

Submitted 17 July, 2013; v1 submitted 25 May, 2013; originally announced May 2013.

Journal ref: J. Appl. Phys. 115, 054513 (2014)

A single ion as a three-body reaction center in an ultracold atomic gas

Authors: Arne Härter, Artjom Krükow, Andreas Brunner, Wolfgang Schnitzler, Stefan Schmid, Johannes Hecker Denschlag

Abstract: We report on three-body recombination of a single trapped Rb^+ ion and two neutral Rb atoms in an ultracold atom cloud. We observe that the corresponding rate coefficient K_3 depends on collision energy and is about a factor of 1000 larger than for three colliding neutral Rb atoms. In the three-body recombination process large energies up to several 0.1eV are released leading to an ejection of the… ▽ More We report on three-body recombination of a single trapped Rb^+ ion and two neutral Rb atoms in an ultracold atom cloud. We observe that the corresponding rate coefficient K_3 depends on collision energy and is about a factor of 1000 larger than for three colliding neutral Rb atoms. In the three-body recombination process large energies up to several 0.1eV are released leading to an ejection of the ion from the atom cloud. It is sympathetically recooled back into the cloud via elastic binary collisions with cold atoms. Further, we find that the final ionic product of the three-body processes is again an atomic Rb^+ ion suggesting that the ion merely acts as a catalyzer, possibly in the formation of deeply bound Rb_2 molecules. △ Less

Submitted 1 June, 2012; originally announced June 2012.

Comments: 5 pages, 4 figures

An apparatus for immersing trapped ions into an ultracold gas of neutral atoms

Authors: Stefan Schmid, Arne Härter, Albert Frisch, Sascha Hoinka, Johannes Hecker Denschlag

Abstract: We describe a hybrid vacuum system in which a single ion or a well defined small number of trapped ions (in our case Ba$^+$ or Rb$^+$) can be immersed into a cloud of ultracold neutral atoms (in our case Rb). This apparatus allows for the study of collisions and interactions between atoms and ions in the ultracold regime. Our setup is a combination of a Bose-Einstein condensation (BEC) apparatus a… ▽ More We describe a hybrid vacuum system in which a single ion or a well defined small number of trapped ions (in our case Ba$^+$ or Rb$^+$) can be immersed into a cloud of ultracold neutral atoms (in our case Rb). This apparatus allows for the study of collisions and interactions between atoms and ions in the ultracold regime. Our setup is a combination of a Bose-Einstein condensation (BEC) apparatus and a linear Paul trap. The main design feature of the apparatus is to first separate the production locations for the ion and the ultracold atoms and then to bring the two species together. This scheme has advantages in terms of stability and available access to the region where the atom-ion collision experiments are carried out. The ion and the atoms are brought together using a moving 1-dimensional optical lattice transport which vertically lifts the atomic sample over a distance of 30$\,$cm from its production chamber into the center of the Paul trap in another chamber. We present techniques to detect and control the relative position between the ion and the atom cloud. △ Less

Submitted 11 April, 2012; v1 submitted 13 February, 2012; originally announced February 2012.

Comments: 10 pages, 13 figures

Dynamics of a cold trapped ion in a Bose-Einstein condensate

Authors: Stefan Schmid, Arne Härter, Johannes Hecker Denschlag

Abstract: We investigate the interaction of a laser-cooled trapped ion (Ba$^+$ or Rb$^+$) with an optically confined $^{87}$Rb Bose-Einstein condensate (BEC). The system features interesting dynamics of the ion and the atom cloud as determined by their collisions and their motion in their respective traps. Elastic as well as inelastic processes are observed and their respective cross sections are determined… ▽ More We investigate the interaction of a laser-cooled trapped ion (Ba$^+$ or Rb$^+$) with an optically confined $^{87}$Rb Bose-Einstein condensate (BEC). The system features interesting dynamics of the ion and the atom cloud as determined by their collisions and their motion in their respective traps. Elastic as well as inelastic processes are observed and their respective cross sections are determined. We demonstrate that a single ion can be used to probe the density profile of an ultracold atom cloud. △ Less

Submitted 27 July, 2010; originally announced July 2010.

Comments: 4 pages, 5 figures

Long Distance Transport of Ultracold Atoms using a 1D optical lattice

Authors: Stefan Schmid, Gregor Thalhammer, Klaus Winkler, Florian Lang, Johannes Hecker Denschlag

Abstract: We study the horizontal transport of ultracold atoms over macroscopic distances of up to 20 cm with a moving 1D optical lattice. By using an optical Bessel beam to form the optical lattice, we can achieve nearly homogeneous trapping conditions over the full transport length, which is crucial in order to hold the atoms against gravity for such a wide range. Fast transport velocities of up to 6 m/… ▽ More We study the horizontal transport of ultracold atoms over macroscopic distances of up to 20 cm with a moving 1D optical lattice. By using an optical Bessel beam to form the optical lattice, we can achieve nearly homogeneous trapping conditions over the full transport length, which is crucial in order to hold the atoms against gravity for such a wide range. Fast transport velocities of up to 6 m/s (corresponding to about 1100 photon recoils) and accelerations of up to 2600 m/s2 are reached. Even at high velocities the momentum of the atoms is precisely defined with an uncertainty of less than one photon recoil. This allows for construction of an atom catapult with high kinetic energy resolution, which might have applications in novel collision experiments. △ Less

Submitted 20 June, 2006; v1 submitted 30 May, 2006; originally announced May 2006.

Comments: 15 pages, 8 figures

Long-lived Feshbach molecules in a 3D optical lattice

Authors: Gregor Thalhammer, Klaus Winkler, Florian Lang, Stefan Schmid, Rudolf Grimm, Johannes Hecker Denschlag

Abstract: We have created and trapped a pure sample of 87Rb2 Feshbach molecules in a three-dimensional optical lattice. Compared to previous experiments without a lattice we find dramatic improvements such as long lifetimes of up to 700 ms and a near unit efficiency for converting tightly confined atom pairs into molecules. The lattice shields the trapped molecules from collisions and thus overcomes the p… ▽ More We have created and trapped a pure sample of 87Rb2 Feshbach molecules in a three-dimensional optical lattice. Compared to previous experiments without a lattice we find dramatic improvements such as long lifetimes of up to 700 ms and a near unit efficiency for converting tightly confined atom pairs into molecules. The lattice shields the trapped molecules from collisions and thus overcomes the problem of inelastic decay by vibrational quenching. Furthermore, we have developed a novel purification scheme that removes residual atoms, resulting in a lattice in which individual sites are either empty or filled with a single molecule in the vibrational ground state of the lattice. △ Less

Submitted 27 October, 2005; originally announced October 2005.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 96, 050402 (2006)