Showing 1–43 of 43 results for author: Kwon, Y

The Belle II Detector Upgrades Framework Conceptual Design Report

Authors: H. Aihara, A. Aloisio, D. P. Auguste, M. Aversano, M. Babeluk, S. Bahinipati, Sw. Banerjee, M. Barbero, J. Baudot, A. Beaubien, F. Becherer, T. Bergauer, F. U. Bernlochner., V. Bertacchi, G. Bertolone, C. Bespin, M. Bessner, S. Bettarini, A. J. Bevan, B. Bhuyan, M. Bona, J. F. Bonis, J. Borah, F. Bosi, R. Boudagga , et al. (186 additional authors not shown)

Abstract: We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive wit… ▽ More We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive with the LHC and other experiments. △ Less

Submitted 4 July, 2024; v1 submitted 26 June, 2024; originally announced June 2024.

Comments: Editor: F. Forti 170 pages

Report number: KEK-REPORT-2024-1, BELLE2-REPORT-2024-042

Improving Demand Forecasting in Open Systems with Cartogram-Enhanced Deep Learning

Authors: Sangjoon Park, Yongsung Kwon, Hyungjoon Soh, Mi Jin Lee, Seung-Woo Son

Abstract: Predicting temporal patterns across various domains poses significant challenges due to their nuanced and often nonlinear trajectories. To address this challenge, prediction frameworks have been continuously refined, employing data-driven statistical methods, mathematical models, and machine learning. Recently, as one of the challenging systems, shared transport systems such as public bicycles hav… ▽ More Predicting temporal patterns across various domains poses significant challenges due to their nuanced and often nonlinear trajectories. To address this challenge, prediction frameworks have been continuously refined, employing data-driven statistical methods, mathematical models, and machine learning. Recently, as one of the challenging systems, shared transport systems such as public bicycles have gained prominence due to urban constraints and environmental concerns. Predicting rental and return patterns at bicycle stations remains a formidable task due to the system's openness and imbalanced usage patterns across stations. In this study, we propose a deep learning framework to predict rental and return patterns by leveraging cartogram approaches. The cartogram approach facilitates the prediction of demand for newly installed stations with no training data as well as long-period prediction, which has not been achieved before. We apply this method to public bicycle rental-and-return data in Seoul, South Korea, employing a spatial-temporal convolutional graph attention network. Our improved architecture incorporates batch attention and modified node feature updates for better prediction accuracy across different time scales. We demonstrate the effectiveness of our framework in predicting temporal patterns and its potential applications. △ Less

Submitted 26 May, 2024; v1 submitted 24 March, 2024; originally announced March 2024.

Comments: 11 pages, 7 figures

Giant piezoelectricity in group IV monochalcogenides with ferroelectric AA layer stacking

Authors: Seungjun Lee, Hyeong-Ryul Kim, Wei Jiang, Young-Kyun Kwon, Tony Low

Abstract: The piezoelectricity of group IV monochalcogenides (MXs, with M = Ge, Sn and X = S, Se) has attracted much attention due to their substantially higher piezoelectric coefficients compared to other 2D materials. However, with increasing layer number, their piezoelectricity rapidly disappears due to the antiferroelectric stacking order, severely limiting their practical applications. Using first-prin… ▽ More The piezoelectricity of group IV monochalcogenides (MXs, with M = Ge, Sn and X = S, Se) has attracted much attention due to their substantially higher piezoelectric coefficients compared to other 2D materials. However, with increasing layer number, their piezoelectricity rapidly disappears due to the antiferroelectric stacking order, severely limiting their practical applications. Using first-principles calculations, we investigated the piezoelectricity of MXs with the ferroelectric AA stacking configuration, which has recently been stabilized in experiments. We found that AA-stacked MXs have a ferroelectric ground state with the smallest lattice constant among other stacking configurations, resulting in a giant piezoelectric coefficient, which is the first demonstration of a strategy where the piezoelectric coefficients can increase with the number of layers. This can be attributed to a strong negative correlation between the lattice constant along the armchair direction and the piezoelectric coefficient, and spontaneous compressive strain stabilized in ferroelectric AA stacking configuration. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Comments: 16 pages and 5 figures for main manuscript. 9pages and 3 figures for SI

Global efficiency and network structure of urban traffic flows: A percolation-based empirical analysis

Authors: Yungi Kwon, Jung-Hoon Jung, Young-Ho Eom

Abstract: Making the connection between the function and structure of networked systems is one of the fundamental issues in complex systems and network science. Urban traffic flows are related to various problems in cities and can be represented as a network of local traffic flows. To identify an empirical relation between the function and network structure of urban traffic flows, we construct a time-varyin… ▽ More Making the connection between the function and structure of networked systems is one of the fundamental issues in complex systems and network science. Urban traffic flows are related to various problems in cities and can be represented as a network of local traffic flows. To identify an empirical relation between the function and network structure of urban traffic flows, we construct a time-varying traffic flow network of a megacity, Seoul, and analyze its global efficiency with a percolation-based approach. Comparing the real-world traffic flow network with its corresponding null-model network having a randomized structure, we show that the real-world network is less efficient than its null-model network during rush hour, yet more efficient during non-rush hour. We observe that in the real-world network, links with the highest betweenness tend to have lower quality during rush hour compared to links with lower betweenness, but higher quality during non-rush hour. Since the top betweenness links tend to be the bridges that connect the network together, their congestion has a stronger impact on the network's global efficiency. Our results suggest that the spatial structure of traffic flow networks is important to understand their function. △ Less

Submitted 5 November, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Comments: 8 pages, 4 figures

Journal ref: Chaos 33, 113104 (2023)

Tracing multiple scattering trajectories for deep optical imaging in scattering media

Authors: Sungsam Kang, Yongwoo Kwon, Hojun Lee, Seho Kim, Jin Hee Hong, Seokchan Yoon, Wonshik Choi

Abstract: Multiple light scattering hampers imaging objects in complex scattering media. Approaches used in real practices mainly aim to filter out multiple scattering obscuring the ballistic waves that travel straight through the scattering medium. Here, we propose a method that makes the deterministic use of multiple scattering for microscopic imaging of an object embedded deep within scattering media. Th… ▽ More Multiple light scattering hampers imaging objects in complex scattering media. Approaches used in real practices mainly aim to filter out multiple scattering obscuring the ballistic waves that travel straight through the scattering medium. Here, we propose a method that makes the deterministic use of multiple scattering for microscopic imaging of an object embedded deep within scattering media. The proposed method finds a stack of multiple complex phase plates that generate similar light trajectories as the original scattering medium. By implementing the inverse scattering using the identified phase plates, our method rectifies multiple scattering and amplifies ballistic waves by almost 600 times, which leads to a substantial increase in imaging depth. Our study marks an important milestone in solving the longstanding high-order inverse scattering problems. △ Less

Submitted 19 February, 2023; originally announced February 2023.

Deep Learning (DL)-based Automatic Segmentation of the Internal Pudendal Artery (IPA) for Reduction of Erectile Dysfunction in Definitive Radiotherapy of Localized Prostate Cancer

Authors: Anjali Balagopal, Michael Dohopolski, Young Suk Kwon, Steven Montalvo, Howard Morgan, Ti Bai, Dan Nguyen, Xiao Liang, Xinran Zhong, Mu-Han Lin, Neil Desai, Steve Jiang

Abstract: Background and purpose: Radiation-induced erectile dysfunction (RiED) is commonly seen in prostate cancer patients. Clinical trials have been developed in multiple institutions to investigate whether dose-sparing to the internal-pudendal-arteries (IPA) will improve retention of sexual potency. The IPA is usually not considered a conventional organ-at-risk (OAR) due to segmentation difficulty. In t… ▽ More Background and purpose: Radiation-induced erectile dysfunction (RiED) is commonly seen in prostate cancer patients. Clinical trials have been developed in multiple institutions to investigate whether dose-sparing to the internal-pudendal-arteries (IPA) will improve retention of sexual potency. The IPA is usually not considered a conventional organ-at-risk (OAR) due to segmentation difficulty. In this work, we propose a deep learning (DL)-based auto-segmentation model for the IPA that utilizes CT and MRI or CT alone as the input image modality to accommodate variation in clinical practice. Materials and methods: 86 patients with CT and MRI images and noisy IPA labels were recruited in this study. We split the data into 42/14/30 for model training, testing, and a clinical observer study, respectively. There were three major innovations in this model: 1) we designed an architecture with squeeze-and-excite blocks and modality attention for effective feature extraction and production of accurate segmentation, 2) a novel loss function was used for training the model effectively with noisy labels, and 3) modality dropout strategy was used for making the model capable of segmentation in the absence of MRI. Results: The DSC, ASD, and HD95 values for the test dataset were 62.2%, 2.54mm, and 7mm, respectively. AI segmented contours were dosimetrically equivalent to the expert physician's contours. The observer study showed that expert physicians' scored AI contours (mean=3.7) higher than inexperienced physicians' contours (mean=3.1). When inexperienced physicians started with AI contours, the score improved to 3.7. Conclusion: The proposed model achieved good quality IPA contours to improve uniformity of segmentation and to facilitate introduction of standardized IPA segmentation into clinical trials and practice. △ Less

Submitted 2 February, 2023; originally announced February 2023.

A data-driven physics-based transport model of solar energetic particles accelerated by coronal mass ejection shocks propagating through the solar coronal and heliospheric magnetic fields

Authors: Ming Zhang, Lei Cheng, Ju Zhang, Pete Riley, Ryun Young Kwon, David Lario, Laura Balmaceda, Nikolai Pogorelov

Abstract: In an effort to develop computational tools for predicting radiation hazards from solar energetic particles (SEPs), we have created a data-driven physics-based particle transport model to calculate the injection, acceleration and propagation of SEPs from coronal mass ejection (CME) shocks traversing through the solar corona and interplanetary magnetic fields. The model runs on an input of corona a… ▽ More In an effort to develop computational tools for predicting radiation hazards from solar energetic particles (SEPs), we have created a data-driven physics-based particle transport model to calculate the injection, acceleration and propagation of SEPs from coronal mass ejection (CME) shocks traversing through the solar corona and interplanetary magnetic fields. The model runs on an input of corona and heliospheric plasma and magnetic field configuration from an MHD model driven by solar photospheric magnetic field measurements superposed with observed CME shocks determined from coronagraph images. Using several advanced computation techniques involving stochastic simulation and integration, it rigorously solves the time-dependent 5-dimensional focus transport equation in the phase space that includes pitch-angle scattering, diffusion across magnetic field line, and particle acceleration by CME shocks. We apply the model to the 2011 November 3 CME event. The calculation results reproduce multi-spacecraft SEP observations reasonably well without normalization of particle flux. This circumsolar SEP event seen by spacecraft at Earth, STEREO-A and STEREO-B at widely separated longitudes can be explained by diffusive shock acceleration by a single CME shock with a moderate speed. △ Less

Submitted 14 December, 2022; originally announced December 2022.

Comments: 26 pages, 12 figures

Effects of electromagnetic fluctuations in plasmas on solar neutrino fluxes

Authors: Eunseok Hwang, Dukjae Jang, Kiwan Park, Motohiko Kusakabe, Toshitaka Kajino, A. Baha Balantekin, Tomoyuki Maruyama, Youngshin Kwon, Kyujin Kwak, Myung-Ki Cheoun

Abstract: We explore the effects of electromagnetic (EM) fluctuations in plasmas on solar neutrino fluxes exploiting the fluctuation-dissipation theorem. We find that the EM spectrum in the solar core is enhanced by the EM fluctuations due to the high density of the Sun, which increases the radiation energy density and pressure. By the EM fluctuations involving the modified radiation formula, the central te… ▽ More We explore the effects of electromagnetic (EM) fluctuations in plasmas on solar neutrino fluxes exploiting the fluctuation-dissipation theorem. We find that the EM spectrum in the solar core is enhanced by the EM fluctuations due to the high density of the Sun, which increases the radiation energy density and pressure. By the EM fluctuations involving the modified radiation formula, the central temperature decreases when the central pressure of the Sun is fixed. With a help of the empirical relation between central temperature and neutrino fluxes deduced from the numerical solar models, we present the change in each of the solar neutrino fluxes by the EM fluctuations. We also discuss the enhanced radiation pressure and energy density by the EM fluctuations for other astronomical objects. △ Less

Submitted 2 November, 2022; originally announced November 2022.

Molecular-scale substrate anisotropy and crowding drive long-range nematic order of cell monolayers

Authors: Yimin Luo, Mengyang Gu, Minwook Park, Xinyi Fang, Younghoon Kwon, Juan Manuel Urueña, Javier Read de Alaniz, Matthew E. Helgeson, M. Cristina Marchetti, Megan T. Valentine

Abstract: The ability of cells to reorganize in response to external stimuli is important in areas ranging from morphogenesis to tissue engineering. Elongated cells can co-align due to steric effects, forming states with local order. We show that molecular-scale substrate anisotropy can direct cell organization, resulting in the emergence of nematic order on tissue scales. To quantitatively examine the diso… ▽ More The ability of cells to reorganize in response to external stimuli is important in areas ranging from morphogenesis to tissue engineering. Elongated cells can co-align due to steric effects, forming states with local order. We show that molecular-scale substrate anisotropy can direct cell organization, resulting in the emergence of nematic order on tissue scales. To quantitatively examine the disorder-order transition, we developed a high-throughput imaging platform to analyze velocity and orientational correlations for several thousand cells over days. The establishment of global, seemingly long-ranged order is facilitated by enhanced cell division along the substrate's nematic axis, and associated extensile stresses that restructure the cells' actomyosin networks. Our work, which connects to a class of systems known as active dry nematics, provides a new understanding of the dynamics of cellular remodeling and organization in weakly interacting cell collectives. This enables data-driven discovery of cell-cell interactions and points to strategies for tissue engineering. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Comments: 29 pages, 7 figures

Establishing Epitaxial Connectedness in Multi-Stacking: The Survival of Thru-Holes in Thru-Hole Epitaxy

Authors: Youngjun Lee, Seungjun Lee, Jaewu Choi, Chinkyo Kim, Young-Kyun Kwon

Abstract: Thru-hole epitaxy has recently been reported to be able to grow readily detachable domains crystallographically aligned with the underlying substrate over 2D mask material transferred onto a substrate. [Jang \textit{et al.}, \textit{Adv. Mater. Interfaces}, \textbf{2023} \textit{10}, 4 2201406] While the experimental demonstration of thru-hole epitaxy of GaN over multiple stacks of $h$-BN was evid… ▽ More Thru-hole epitaxy has recently been reported to be able to grow readily detachable domains crystallographically aligned with the underlying substrate over 2D mask material transferred onto a substrate. [Jang \textit{et al.}, \textit{Adv. Mater. Interfaces}, \textbf{2023} \textit{10}, 4 2201406] While the experimental demonstration of thru-hole epitaxy of GaN over multiple stacks of $h$-BN was evident, the detailed mechanism of how small holes in each stack of $h$-BN survived as thru-holes during multiple stacking of $h$-BN was not intuitively clear. Here, we use Monte Carlo simulations to investigate the conditions under which holes in each stack of 2D mask layers can survive as thru-holes during multiple stacking. If holes are highly anisotropic in shape by connecting smaller holes in a particular direction, thru-holes can be maintained with a high survival rate per stack, establishing more epitaxial connectedness. Our work verifies and supports that thru-hole epitaxy is attributed to the epitaxial connectedness established by thru-holes surviving even through multiple stacks. △ Less

Submitted 21 August, 2023; v1 submitted 10 October, 2022; originally announced October 2022.

Comments: 16 pages, 6 figures

Journal ref: Adv. Eng. Mater. 26 (3), 2301654 (2024)

Simulation of the Solar Energetic Particle Event on 2020 May 29 Observed by Parker Solar Probe

Authors: Lei Cheng, Ming Zhang, David Lario, Laura A. Balmaceda, Ryun Young Kwon, Christina Cohen

Abstract: This paper presents a stochastic three-dimensional (3D) focused transport simulation of solar energetic particles (SEPs) produced by a data-driven coronal mass ejection (CME) shock propagating through a data-driven model of coronal and heliospheric magnetic fields. The injection of SEPs at the CME shock is treated using diffusive shock acceleration of post-shock superthermal solar wind ions. A tim… ▽ More This paper presents a stochastic three-dimensional (3D) focused transport simulation of solar energetic particles (SEPs) produced by a data-driven coronal mass ejection (CME) shock propagating through a data-driven model of coronal and heliospheric magnetic fields. The injection of SEPs at the CME shock is treated using diffusive shock acceleration of post-shock superthermal solar wind ions. A time backward stochastic simulation is employed to solve the transport equation to obtain the SEP time-intensity profile at any location, energy, and pitch angle. The model is applied to a SEP event on 2020 May 29, observed by STEREO-A close to 1 au and by Parker Solar Probe (PSP) when it was about 0.33 au away from the Sun. The SEP event was associated with a very slow CME with a plane-of-sky speed of 337 km/s at a height below 6 $\rm R_S$ as reported in the SOHO/LASCO CME catalog. We compute the time profiles of particle flux at PSP and STEREO-A locations, and estimate both the spectral index of the proton energy spectrum for energies between 2 and 16 MeV and the equivalent path length of the magnetic field lines experienced by the first arriving SEPs. We found that the simulation results are well correlated with observations. The SEP event could be explained by the acceleration of particles by a weak CME shock in the low solar corona that is not magnetically connected to the observers. △ Less

Submitted 6 September, 2022; originally announced September 2022.

Comments: 18 pages, 6 figures

Performance of the Electromagnetic Pixel Calorimeter Prototype EPICAL-2

Authors: J. Alme, R. Barthel, A. van Bochove, V. Borshchov, R. Bosley, A. van den Brink, E. Broeils, H. Büsching, V. N. Eikeland, O. S. Groettvik, Y. H. Han, N. van der Kolk, J. H. Kim, T. J. Kim, Y. Kwon, M. Mager, Q. W. Malik, E. Okkinga, T. Y. Park, T. Peitzmann, F. Pliquett, M. Protsenko, F. Reidt, S. van Rijk, K. Røed , et al. (9 additional authors not shown)

Abstract: The first evaluation of an ultra-high granularity digital electromagnetic calorimeter prototype using 1.0-5.8 GeV/c electrons is presented. The $25\times10^6$ pixel detector consists of 24 layers of ALPIDE CMOS MAPS sensors, with a pitch of around 30~$μみゅー$m, and has a depth of almost 20 radiation lengths of tungsten absorber. Ultra-thin cables allow for a very compact design. The properties that are… ▽ More The first evaluation of an ultra-high granularity digital electromagnetic calorimeter prototype using 1.0-5.8 GeV/c electrons is presented. The $25\times10^6$ pixel detector consists of 24 layers of ALPIDE CMOS MAPS sensors, with a pitch of around 30~$μみゅー$m, and has a depth of almost 20 radiation lengths of tungsten absorber. Ultra-thin cables allow for a very compact design. The properties that are critical for physics studies are measured: electromagnetic shower response, energy resolution and linearity. The stochastic energy resolution is comparable with the state-of-the art resolution for a Si-W calorimeter, with data described well by a simulation model using GEANT and Allpix$^2$. The performance achieved makes this technology a good candidate for use in the ALICE FoCal upgrade, and in general demonstrates the strong potential for future applications in high-energy physics. △ Less

Submitted 28 December, 2022; v1 submitted 6 September, 2022; originally announced September 2022.

Comments: 30 pages, 19 figures, submitted to JINST

Results from the EPICAL-2 Ultra-High Granularity Electromagnetic Calorimeter Prototype

Authors: T. Peitzmann, J. Alme, R. Barthel, A. van Bochove, V. Borshchov, R. Bosley, A. van den Brink, E. Broeils, H. Büsching, V. N. Eikeland, O. S. Groettvik, Y. H. Han, N. van der Kolk, J. H. Kim, T. J. Kim, Y. Kwon, M. Mager, Q. W. Malik, E. Okkinga, T. Y. Park, F. Pliquett, M. Protsenko, F. Reidt, S. van Rijk, K. Røed , et al. (9 additional authors not shown)

Abstract: A prototype of a new type of calorimeter has been designed and constructed, based on a silicon-tungsten sampling design using pixel sensors with digital readout. It makes use of the Alpide MAPS sensor developed for the ALICE ITS upgrade. A binary readout is possible due to the pixel size of $\approx 30 \times 30 \, μみゅー\mathrm{m}^2$. This prototype has been successfully tested with cosmic muons and w… ▽ More A prototype of a new type of calorimeter has been designed and constructed, based on a silicon-tungsten sampling design using pixel sensors with digital readout. It makes use of the Alpide MAPS sensor developed for the ALICE ITS upgrade. A binary readout is possible due to the pixel size of $\approx 30 \times 30 \, μみゅー\mathrm{m}^2$. This prototype has been successfully tested with cosmic muons and with test beams at DESY and the CERN SPS. We report on performance results obtained at DESY, showing good energy resolution and linearity, and compare to detailed MC simulations. Also shown are preliminary results of the high-energy performance as measured at the SPS. The two-shower separation capabilities are discussed. △ Less

Submitted 27 September, 2022; v1 submitted 5 July, 2022; originally announced July 2022.

Comments: Proceedings to PM2021 - The 15. PISA Meeting on Advanced Detectors, updated after referee review

First High-speed Video Camera Observations of a Lightning Flash Associated with a Downward Terrestrial Gamma-ray Flash

Authors: R. U. Abbasi, M. M. F. Saba, J. W. Belz, P. R. Krehbiel, W. Rison, N. Kieu, D. R. da Silva, Dan Rodeheffer, M. A. Stanley, J. Remington, J. Mazich, R. LeVon, K. Smout, A. Petrizze, T. Abu-Zayyad, M. Allen, Y. Arai, R. Arimura, E. Barcikowski, D. R. Bergman, S. A. Blake, I. Buckland, B. G. Cheon, M. Chikawa, T. Fujii , et al. (127 additional authors not shown)

Abstract: In this paper, we present the first high-speed video observation of a cloud-to-ground lightning flash and its associated downward-directed Terrestrial Gamma-ray Flash (TGF). The optical emission of the event was observed by a high-speed video camera running at 40,000 frames per second in conjunction with the Telescope Array Surface Detector, Lightning Mapping Array, interferometer, electric-field… ▽ More In this paper, we present the first high-speed video observation of a cloud-to-ground lightning flash and its associated downward-directed Terrestrial Gamma-ray Flash (TGF). The optical emission of the event was observed by a high-speed video camera running at 40,000 frames per second in conjunction with the Telescope Array Surface Detector, Lightning Mapping Array, interferometer, electric-field fast antenna, and the National Lightning Detection Network. The cloud-to-ground flash associated with the observed TGF was formed by a fast downward leader followed by a very intense return stroke peak current of -154 kA. The TGF occurred while the downward leader was below cloud base, and even when it was halfway in its propagation to ground. The suite of gamma-ray and lightning instruments, timing resolution, and source proximity offer us detailed information and therefore a unique look at the TGF phenomena. △ Less

Submitted 9 August, 2023; v1 submitted 10 May, 2022; originally announced May 2022.

Journal ref: Geophysical Research Letters, 50, e2023GL102958 (2023)

Observation of Variations in Cosmic Ray Single Count Rates During Thunderstorms and Implications for Large-Scale Electric Field Changes

Authors: R. U. Abbasi, T. Abu-Zayyad, M. Allen, Y. Arai, R. Arimura, E. Barcikowski, J. W. Belz, D. R. Bergman, S. A. Blake, I. Buckland, R. Cady, B. G. Cheon, J. Chiba, M. Chikawa, T. Fujii, K. Fujisue, K. Fujita, R. Fujiwara, M. Fukushima, R. Fukushima, G. Furlich, N. Globus, R. Gonzalez, W. Hanlon, M. Hayashi , et al. (140 additional authors not shown)

Abstract: We present the first observation by the Telescope Array Surface Detector (TASD) of the effect of thunderstorms on the development of cosmic ray single count rate intensity over a 700 km$^{2}$ area. Observations of variations in the secondary low-energy cosmic ray counting rate, using the TASD, allow us to study the electric field inside thunderstorms, on a large scale, as it progresses on top of t… ▽ More We present the first observation by the Telescope Array Surface Detector (TASD) of the effect of thunderstorms on the development of cosmic ray single count rate intensity over a 700 km$^{2}$ area. Observations of variations in the secondary low-energy cosmic ray counting rate, using the TASD, allow us to study the electric field inside thunderstorms, on a large scale, as it progresses on top of the 700 km$^{2}$ detector, without dealing with the limitation of narrow exposure in time and space using balloons and aircraft detectors. In this work, variations in the cosmic ray intensity (single count rate) using the TASD, were studied and found to be on average at the $\sim(0.5-1)\%$ and up to 2\% level. These observations were found to be both in excess and in deficit. They were also found to be correlated with lightning in addition to thunderstorms. These variations lasted for tens of minutes; their footprint on the ground ranged from 6 to 24 km in diameter and moved in the same direction as the thunderstorm. With the use of simple electric field models inside the cloud and between cloud to ground, the observed variations in the cosmic ray single count rate were recreated using CORSIKA simulations. Depending on the electric field model used and the direction of the electric field in that model, the electric field magnitude that reproduces the observed low-energy cosmic ray single count rate variations was found to be approximately between 0.2-0.4 GV. This in turn allows us to get a reasonable insight on the electric field and its effect on cosmic ray air showers inside thunderstorms. △ Less

Submitted 18 November, 2021; originally announced November 2021.

Predicting Atlantic Multidecadal Variability

Authors: Glenn Liu, Peidong Wang, Matthew Beveridge, Young-Oh Kwon, Iddo Drori

Abstract: Atlantic Multidecadal Variability (AMV) describes variations of North Atlantic sea surface temperature with a typical cycle of between 60 and 70 years. AMV strongly impacts local climate over North America and Europe, therefore prediction of AMV, especially the extreme values, is of great societal utility for understanding and responding to regional climate change. This work tests multiple machine… ▽ More Atlantic Multidecadal Variability (AMV) describes variations of North Atlantic sea surface temperature with a typical cycle of between 60 and 70 years. AMV strongly impacts local climate over North America and Europe, therefore prediction of AMV, especially the extreme values, is of great societal utility for understanding and responding to regional climate change. This work tests multiple machine learning models to improve the state of AMV prediction from maps of sea surface temperature, salinity, and sea level pressure in the North Atlantic region. We use data from the Community Earth System Model 1 Large Ensemble Project, a state-of-the-art climate model with 3,440 years of data. Our results demonstrate that all of the models we use outperform the traditional persistence forecast baseline. Predicting the AMV is important for identifying future extreme temperatures and precipitation, as well as hurricane activity, in Europe and North America up to 25 years in advance. △ Less

Submitted 29 October, 2021; originally announced November 2021.

Comments: 7 pages, 3 figures

Journal ref: Tackling Climate Change with Machine Learning workshop at NeurIPS 2021

First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors

Authors: ALICE ITS project, :, G. Aglieri Rinella, M. Agnello, B. Alessandro, F. Agnese, R. S. Akram, J. Alme, E. Anderssen, D. Andreou, F. Antinori, N. Apadula, P. Atkinson, R. Baccomi, A. Badalà, A. Balbino, C. Bartels, R. Barthel, F. Baruffaldi, I. Belikov, S. Beole, P. Becht, A. Bhatti, M. Bhopal, N. Bianchi , et al. (230 additional authors not shown)

Abstract: A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μみゅー$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μみゅー$m, they can be successfully bent to ra… ▽ More A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μみゅー$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μみゅー$m, they can be successfully bent to radii of about 2cm without any signs of mechanical or electrical damage. During a subsequent characterisation using a 5.4GeV electron beam, it was further confirmed that they preserve their full electrical functionality as well as particle detection performance. In this article, the bending procedure and the setup used for characterisation are detailed. Furthermore, the analysis of the beam test, including the measurement of the detection efficiency as a function of beam position and local inclination angle, is discussed. The results show that the sensors maintain their excellent performance after bending to radii of 2cm, with detection efficiencies above 99.9% at typical operating conditions, paving the way towards a new class of detectors with unprecedented low material budget and ideal geometrical properties. △ Less

Submitted 17 August, 2021; v1 submitted 27 May, 2021; originally announced May 2021.

Surface detectors of the TAx4 experiment

Authors: Telescope Array Collaboration, R. U. Abbasi, M. Abe, T. Abu-Zayyad, M. Allen, Y. Arai, E. Barcikowski, J. W. Belz, D. R. Bergman, S. A. Blake, R. Cady, B. G. Cheon, J. Chiba, M. Chikawa, T. Fujii, K. Fujisue, K. Fujita, R. Fujiwara, M. Fukushima, R. Fukushima, G. Furlich, W. Hanlon, M. Hayashi, N. Hayashida, K. Hibino , et al. (124 additional authors not shown)

Abstract: Telescope Array (TA) is the largest ultrahigh energy cosmic-ray (UHECR) observatory in the Northern Hemisphere. It explores the origin of UHECRs by measuring their energy spectrum, arrival-direction distribution, and mass composition using a surface detector (SD) array covering approximately 700 km$^2$ and fluorescence detector (FD) stations. TA has found evidence for a cluster of cosmic rays with… ▽ More Telescope Array (TA) is the largest ultrahigh energy cosmic-ray (UHECR) observatory in the Northern Hemisphere. It explores the origin of UHECRs by measuring their energy spectrum, arrival-direction distribution, and mass composition using a surface detector (SD) array covering approximately 700 km$^2$ and fluorescence detector (FD) stations. TA has found evidence for a cluster of cosmic rays with energies greater than 57 EeV. In order to confirm this evidence with more data, it is necessary to increase the data collection rate.We have begun building an expansion of TA that we call TAx4. In this paper, we explain the motivation, design, technical features, and expected performance of the TAx4 SD. We also present TAx4's current status and examples of the data that have already been collected. △ Less

Submitted 1 March, 2021; originally announced March 2021.

Comments: 26 pages, 17 figures, submitted to Nuclear Inst. and Methods in Physics Research, A

An isolated logarithmic layer

Authors: Yongseok Kwon, Javier Jimenez

Abstract: To isolate the multiscale dynamics of the logarithmic layer of wall-bounded turbulent flows, a novel numerical experiment is conducted in which the mean tangential Reynolds stress is eliminated except in a subregion corresponding to the typical location of the logarithmic layer in channels. Various statistical comparisons against channel flow databases show that, despite some differences, this mod… ▽ More To isolate the multiscale dynamics of the logarithmic layer of wall-bounded turbulent flows, a novel numerical experiment is conducted in which the mean tangential Reynolds stress is eliminated except in a subregion corresponding to the typical location of the logarithmic layer in channels. Various statistical comparisons against channel flow databases show that, despite some differences, this modified flow system reproduces the kinematics and dynamics of natural logarithmic layers well, even in the absence of a buffer and an outer zone. This supports the previous idea that the logarithmic layer has its own autonomous dynamics. In particular, the results suggest that the mean velocity gradient and the wall-parallel scale of the largest eddies are determined by the height of the tallest momentum-transferring motions, implying that the very large-scale motions of wall-bounded flows are not an intrinsic part of logarithmic-layer dynamics. Using a similar set-up, an isolated layer with a constant total stress, representing the logarithmic layer without a driving force, is simulated and examined. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Comments: Accepted in the journal of fluid mechanics

Journal ref: J. Fluid Mech. 916 (2021) A35

The trigger slow control system of the Belle II experiment

Authors: C. -H. Kim, Y. Unno, B. G. Cheon, S. H. Kim, I. S. Lee, T. Koga, Y. -T. Lai, Y. Iwasaki, S. Yamada, M. Nakao, H. Nakazawa, E. -J. Jang, S. -K. Choi, T. Konno, D. Liventsev, S. -H. Park, Y. -J. Kwon, O. Hartbrich, M. Ritzert

Abstract: The Belle II experiment at the SuperKEKB $e^{+}e^{-}$ collider in KEK, Japan, started physics data-taking with a complete detector from early 2019 with the primary physics goal of probing new physics in heavy quark and lepton decays. An online trigger system is indispensable for the Belle II experiment to reduce the beam background events associated with high electron and positron beam currents wi… ▽ More The Belle II experiment at the SuperKEKB $e^{+}e^{-}$ collider in KEK, Japan, started physics data-taking with a complete detector from early 2019 with the primary physics goal of probing new physics in heavy quark and lepton decays. An online trigger system is indispensable for the Belle II experiment to reduce the beam background events associated with high electron and positron beam currents without sacrificing the target physics-oriented events. During the Belle II operation upon beam collision, the trigger system must be consistently controlled and its status must be carefully monitored in the process of data acquisition against unexpected situations. For this purpose, we have developed a slow control system for the Belle II trigger system. Around seventy thousand configuration parameters are saved in the Belle II central database server for every run when a run starts and stops. These parameters play an essential role in offline validation of the quality of runs. Around three thousand real-time variables are stored in the Belle II main archiving server, and the trend of some of these variables are regularly used for online and offline monitoring purposes. Various operator interface tools have been prepared and used. When the configuration parameters are not correctly applied, or some of the processes are unexpectedly terminated, the slow control system detects it, stops the data-taking process, and generates an alarm. In this article, we report how we constructed the Belle II trigger slow control system, and how we successfully managed to operate during its initial stage. △ Less

Submitted 20 January, 2021; v1 submitted 3 November, 2020; originally announced November 2020.

Observations of the Origin of Downward Terrestrial Gamma-Ray Flashes

Authors: J. W. Belz, P. R. Krehbiel, J. Remington, M. A. Stanley, R. U. Abbasi, R. LeVon, W. Rison, D. Rodeheffer, the Telescope Array Scientific Collaboration, :, T. Abu-Zayyad, M. Allen, E. Barcikowski, D. R. Bergman, S. A. Blake, M. Byrne, R. Cady, B. G. Cheon, M. Chikawa, A. di Matteo, T. Fujii, K. Fujita, R. Fujiwara, M. Fukushima, G. Furlich , et al. (116 additional authors not shown)

Abstract: In this paper we report the first close, high-resolution observations of downward-directed terrestrial gamma-ray flashes (TGFs) detected by the large-area Telescope Array cosmic ray observatory, obtained in conjunction with broadband VHF interferometer and fast electric field change measurements of the parent discharge. The results show that the TGFs occur during strong initial breakdown pulses (I… ▽ More In this paper we report the first close, high-resolution observations of downward-directed terrestrial gamma-ray flashes (TGFs) detected by the large-area Telescope Array cosmic ray observatory, obtained in conjunction with broadband VHF interferometer and fast electric field change measurements of the parent discharge. The results show that the TGFs occur during strong initial breakdown pulses (IBPs) in the first few milliseconds of negative cloud-to-ground and low-altitude intracloud flashes, and that the IBPs are produced by a newly-identified streamer-based discharge process called fast negative breakdown. The observations indicate the relativistic runaway electron avalanches (RREAs) responsible for producing the TGFs are initiated by embedded spark-like transient conducting events (TCEs) within the fast streamer system, and potentially also by individual fast streamers themselves. The TCEs are inferred to be the cause of impulsive sub-pulses that are characteristic features of classic IBP sferics. Additional development of the avalanches would be facilitated by the enhanced electric field ahead of the advancing front of the fast negative breakdown. In addition to showing the nature of IBPs and their enigmatic sub-pulses, the observations also provide a possible explanation for the unsolved question of how the streamer to leader transition occurs during the initial negative breakdown, namely as a result of strong currents flowing in the final stage of successive IBPs, extending backward through both the IBP itself and the negative streamer breakdown preceding the IBP. △ Less

Submitted 12 October, 2020; v1 submitted 29 September, 2020; originally announced September 2020.

Comments: Typo fixed and reference added. Manuscript is 36 pages. Supplemental Information is 42 pages. This paper is to be published in the Journal of Geophysical Research: Atmospheres. Online data repository: Open Science Framework DOI: 10.17605/OSF.IO/Z3XDA

Low geo-effectiveness of fast halo CMEs related to the 12 X-class flares in 2002

Authors: B. Schmieder, R. S. Kim, B. Grison, K. Bocchialini, R. Y. Kwon, S. Poedts, P. Démoulin

Abstract: It is generally accepted that extreme space weather events tend to be related to strong flares and fast halo coronal mass ejections CMEs. In the present paper, we carefully identify the chain of events from the Sun to the Earth induced by all 12 X-class flares that occurred in 2002. In this small sample, we find an unusual high rate (58\%) of solar sources with a longitude larger than 74 degrees.… ▽ More It is generally accepted that extreme space weather events tend to be related to strong flares and fast halo coronal mass ejections CMEs. In the present paper, we carefully identify the chain of events from the Sun to the Earth induced by all 12 X-class flares that occurred in 2002. In this small sample, we find an unusual high rate (58\%) of solar sources with a longitude larger than 74 degrees. Yet, all 12 X-class flares are associated with at least one CME. The fast halo CMEs (50\% ) are related to interplanetary CMEs (ICMEs) at L1 and weak Dst minimum values ($> -51\;$nT); while 5 (41\%) of the 12 X-class flares are related to solar proton events (SPE). We conclude that: (i) All twelve analyzed solar events, even those associated with fast halo CMEs originating from the central disk region, and those ICMEs and SPEs were not very geo-effective. This unexpected result demonstrates that the suggested events in the chain (fast halo CME, X-class flares, central disk region, ICME, SPE) are not infallible proxies for geo-effectiveness. (ii) The low value of integrated and normalized southward component of the IMF ($B^*_z$) may explain the low geo-effectiveness for this small sample. In fact, $B^*_z$ is well correlated to the weak Dst and low auroral electrojet (AE) activity. Hence, the only space weather impact at Earth in 2002 we can explain is based on $B^*_z$ at L1. △ Less

Submitted 23 March, 2020; originally announced March 2020.

Comments: 33 pages, 12 figures

Journal ref: JGR 2020

Microelectromechanical-System-Based Design of a High-Finesse Fiber Cavity Integrated with an Ion Trap

Authors: Moonjoo Lee, Minjae Lee, Seokjun Hong, Klemens Schüppert, Yeong-Dae Kwon, Taehyun Kim, Yves Colombe, Tracy E. Northup, Dong-Il "Dan" Cho, Rainer Blatt

Abstract: We present a numerical study of a MEMS-based design of a fiber cavity integrated with an ion trap system. Each fiber mirror is supported by a microactuator that controls the mirror's position in three dimensions. The mechanical stability is investigated by a feasibility analysis showing that the actuator offers a stable support of the fiber. The actuators move the fibers' positions continuously wi… ▽ More We present a numerical study of a MEMS-based design of a fiber cavity integrated with an ion trap system. Each fiber mirror is supported by a microactuator that controls the mirror's position in three dimensions. The mechanical stability is investigated by a feasibility analysis showing that the actuator offers a stable support of the fiber. The actuators move the fibers' positions continuously with a stroke of more than 10 $μみゅー$m, with mechanical resonance frequencies on the order of kHz. A calculation of the trapping potential shows that a separation between ion and fiber consistent with strong ion-cavity coupling is feasible. Our miniaturized ion-photon interface constitutes a viable approach to integrated hardware for quantum information. △ Less

Submitted 27 May, 2020; v1 submitted 17 July, 2019; originally announced July 2019.

Comments: 14 pages, 11 figures, 3 tables

Journal ref: Phys. Rev. Applied 12, 044052 (2019)

Uncertainty quantification of molecular property prediction using Bayesian neural network models

Authors: Seongok Ryu, Yongchan Kwon, Woo Youn Kim

Abstract: In chemistry, deep neural network models have been increasingly utilized in a variety of applications such as molecular property predictions, novel molecule designs, and planning chemical reactions. Despite the rapid increase in the use of state-of-the-art models and algorithms, deep neural network models often produce poor predictions in real applications because model performance is highly depen… ▽ More In chemistry, deep neural network models have been increasingly utilized in a variety of applications such as molecular property predictions, novel molecule designs, and planning chemical reactions. Despite the rapid increase in the use of state-of-the-art models and algorithms, deep neural network models often produce poor predictions in real applications because model performance is highly dependent on the quality of training data. In the field of molecular analysis, data are mostly obtained from either complicated chemical experiments or approximate mathematical equations, and then quality of data may be questioned.In this paper, we quantify uncertainties of prediction using Bayesian neural networks in molecular property predictions. We estimate both model-driven and data-driven uncertainties, demonstrating the usefulness of uncertainty quantification as both a quality checker and a confidence indicator with the three experiments. Our results manifest that uncertainty quantification is necessary for more reliable molecular applications and Bayesian neural network models can be a practical approach. △ Less

Submitted 18 November, 2018; originally announced May 2019.

Comments: Workshop on "Machine Learning for Molecules and Materials", NIPS 2018. arXiv admin note: substantial text overlap with arXiv:1903.08375

A next-generation LHC heavy-ion experiment

Authors: D. Adamová, G. Aglieri Rinella, M. Agnello, Z. Ahammed, D. Aleksandrov, A. Alici, A. Alkin, T. Alt, I. Altsybeev, D. Andreou, A. Andronic, F. Antinori, P. Antonioli, H. Appelshäuser, R. Arnaldi, I. C. Arsene, M. Arslandok, R. Averbeck, M. D. Azmi, X. Bai, R. Bailhache, R. Bala, L. Barioglio, G. G. Barnaföldi, L. S. Barnby , et al. (374 additional authors not shown)

Abstract: The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th… ▽ More The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector. △ Less

Submitted 2 May, 2019; v1 submitted 31 January, 2019; originally announced February 2019.

Comments: Input to the 2020 Update of the European Particle Physics Strategy

Environmental Monitoring for Belle II

Authors: SeokHee Park, Youngjoon Kwon, Mikihiko Nakao, Uehara Sadaharu, Tomoyuki Konno

Abstract: The Belle II experiment has just started, searching for physics beyond the Standard Model in $B$, charm and $τたう$ decays using data with the integrated luminosity goal of $50 ~\mathrm{ab}^{-1}$. Before the physics run with full detector system being installed, Belle II Phase 2 run is on-going at the time of the conference, until July 2018. In this presentation, we describe the environmental monitori… ▽ More The Belle II experiment has just started, searching for physics beyond the Standard Model in $B$, charm and $τたう$ decays using data with the integrated luminosity goal of $50 ~\mathrm{ab}^{-1}$. Before the physics run with full detector system being installed, Belle II Phase 2 run is on-going at the time of the conference, until July 2018. In this presentation, we describe the environmental monitoring system with an emphasis on the software tools to help the experts and the non-expert shifters who operate the experiment. The monitoring tools are prepared on the control room especially for the shift-takers. It consists of thre components: the monitoring GUI, the alarm system, and the archiver. The monitoring GUI shows the current state of the detector and the alarm system generate warning states from monitored variables with sound and email notification. The archiver is collecting data on single server and provide collected data to the experimental collaborators. △ Less

Submitted 23 June, 2018; originally announced June 2018.

Comments: Poster presentation at 21st IEEE Real Time Conference (RT2018)

Gamma-ray Showers Observed at Ground Level in Coincidence With Downward Lightning Leaders

Authors: R. U. Abbasi, T. Abu-Zayyad, M. Allen, E. Barcikowski, J. W. Belz, D. R. Bergman, S. A. Blake, M. Byrne, R. Cady, B. G. Cheon, J. Chiba, M. Chikawa, T. Fujii, M. Fukushima, G. Furlich, T. Goto, W. Hanlon, Y. Hayashi, N. Hayashida, K. Hibino, K. Honda, D. Ikeda, N. Inoue, T. Ishii, H. Ito , et al. (99 additional authors not shown)

Abstract: Bursts of gamma ray showers have been observed in coincidence with downward propagating negative leaders in lightning flashes by the Telescope Array Surface Detector (TASD). The TASD is a 700~square kilometer cosmic ray observatory located in southwestern Utah, U.S.A. In data collected between 2014 and 2016, correlated observations showing the structure and temporal development of three shower-pro… ▽ More Bursts of gamma ray showers have been observed in coincidence with downward propagating negative leaders in lightning flashes by the Telescope Array Surface Detector (TASD). The TASD is a 700~square kilometer cosmic ray observatory located in southwestern Utah, U.S.A. In data collected between 2014 and 2016, correlated observations showing the structure and temporal development of three shower-producing flashes were obtained with a 3D lightning mapping array, and electric field change measurements were obtained for an additional seven flashes, in both cases co-located with the TASD. National Lightning Detection Network (NLDN) information was also used throughout. The showers arrived in a sequence of 2--5 short-duration ($\le$10~$μみゅー$s) bursts over time intervals of several hundred microseconds, and originated at an altitude of $\simeq$3--5 kilometers above ground level during the first 1--2 ms of downward negative leader breakdown at the beginning of cloud-to-ground lightning flashes. The shower footprints, associated waveforms and the effect of atmospheric propagation indicate that the showers consist primarily of downward-beamed gamma radiation. This has been supported by GEANT simulation studies, which indicate primary source fluxes of $\simeq$$10^{12}$--$10^{14}$ photons for $16^{\circ}$ half-angle beams. We conclude that the showers are terrestrial gamma-ray flashes (TGFs), similar to those observed by satellites, but that the ground-based observations are more representative of the temporal source activity and are also more sensitive than satellite observations, which detect only the most powerful TGFs. △ Less

Submitted 18 May, 2018; v1 submitted 17 May, 2017; originally announced May 2017.

Journal ref: J. Geophys. Res. Atmos., 123 (2018)

Nonstationary distributions of wave intensities in Wave Turbulence

Authors: Yeontaek Choi, Young-Sam Kwon, Sanggyu Jo, Sergey Nazarenko

Abstract: We obtain a general solution for the probability density function of wave intensities in non-stationary Wave Turbulence. The solution is expressed in terms of the wave action spectrum evolving according the the wave-kinetic equation. We establish that, in absence of wave breaking, the wave statistics asymptotes to a Gaussian distribution in forced-dissipated wave systems that approach a steady sta… ▽ More We obtain a general solution for the probability density function of wave intensities in non-stationary Wave Turbulence. The solution is expressed in terms of the wave action spectrum evolving according the the wave-kinetic equation. We establish that, in absence of wave breaking, the wave statistics asymptotes to a Gaussian distribution in forced-dissipated wave systems that approach a steady state. Also, in non-stationary systems, if the statistics is Gaussian initially, it will remain Gaussian at any time. Generally, the statistics that is not Gaussian initially will remain non-Gaussian over the characteristic nonlinear time of the wave spectrum. In freely decaying wave turbulence, substantial deviations from Gaussianity may persist infinitely long. △ Less

Submitted 6 April, 2017; originally announced April 2017.

Drift-compensated Low-noise Frequency Synthesis Based on a cryoCSO for the KRISS-F1

Authors: Myoung-Sun Heo, Sang Eon Park, Won-Kyu Lee, Sang-Bum Lee, Hyun-Gue Hong, Taeg Yong Kwon, Chang Yong Park, Dai-Hyuk Yu, G. Santarelli, Ashby Hilton, Andre N. Luiten, John G. Hartnett

Abstract: In this paper we report on the implementation and stability analysis of a drift-compensated frequency synthesizer from a cryogenic sapphire oscillator (CSO) designed for a Cs/Rb atomic fountain clock. The synthesizer has two microwave outputs of 7 GHz and 9 GHz for Rb and Cs atom interrogation, respectively. The short-term stability of these microwave signals, measured using an optical frequency c… ▽ More In this paper we report on the implementation and stability analysis of a drift-compensated frequency synthesizer from a cryogenic sapphire oscillator (CSO) designed for a Cs/Rb atomic fountain clock. The synthesizer has two microwave outputs of 7 GHz and 9 GHz for Rb and Cs atom interrogation, respectively. The short-term stability of these microwave signals, measured using an optical frequency comb locked to an ultra-stable laser, is better than $5\times10^{-15}$ at an averaging time of 1 s. We demonstrate that the short-term stability of the synthesizer is lower than the quantum projection noise limit of the Cs fountain clock, KRISS-F1(Cs) by measuring the short-term stability of the fountain with varying trapped atom number. The stability of the fountain at 1-s averaging time reaches $2.5\times10^{-14}$ at the highest atom number in the experiment when the synthesizer is used as an interrogation oscillator of the fountain. In order to compensate the frequency drift of the CSO, the output frequency of a waveform generator in the synthesis chain is ramped linearly. By doing this, the stability of the synthesizer at an average time of one hour reaches a level of $10^{-16}$ which is measured with the fountain clock. △ Less

Submitted 6 October, 2016; originally announced October 2016.

Comments: 8 pages, 6 figures

Analytic Model of Variable Characteristic of Coefficient of Restitution and Its Application to Soccer Ball Trajectory Planning

Authors: Hwan-Taek Ryu, Byung-Ju Yi, Younghun Kwon

Abstract: In this article, we investigate the behavior of the coefficient of restitution (COR) which is an important parameter in many impact-related fields. In many cases, the COR is considered as a constant value, but it varies according to many variables. In this paper, we introduce an analytical variable COR model considering aero dynamics along with its verification through experiment. To introduce and… ▽ More In this article, we investigate the behavior of the coefficient of restitution (COR) which is an important parameter in many impact-related fields. In many cases, the COR is considered as a constant value, but it varies according to many variables. In this paper, we introduce an analytical variable COR model considering aero dynamics along with its verification through experiment. To introduce and analyze the variable characteristic of the COR model, the collision phenomenon between a pendulum and two kinds of ball is employed as an example and aerodynamics such as drag force is considered for analyzing the after-effect of the collision. Collision velocity of the pendulum, dynamic parameters of colliding bodies, contact time, drag coefficient, the air density, and the cross-sectional area of the ball are found as the typical variables of analytical COR model. This observation generalizes the result in previous researches. To verify new COR model, the travel distances for the curve-fitted constant COR model and the curve-fitted variable COR model are compared through simulation and experiment. Moreover, comparison between constant COR and variable COR is presented in several point of views. Finally, using the variable COR model, the travel distance of the ball for collision velocity, which is beyond the curve-fitted range, is estimated. △ Less

Submitted 19 August, 2014; originally announced August 2014.

Femtojoule-scale all-optical latching and modulation via cavity nonlinear optics

Authors: Yeong-Dae Kwon, Michael A. Armen, Hideo Mabuchi

Abstract: We experimentally characterize Hopf bifurcation phenomena at femtojoule energy scales in a multi-atom cavity quantum electrodynamical (cavity QED) system, and demonstrate how such behaviors can be exploited in the design of all-optical memory and modulation devices. The data are analyzed using a semiclassical model that explicitly treats heterogeneous coupling of atoms to the cavity mode. Our resu… ▽ More We experimentally characterize Hopf bifurcation phenomena at femtojoule energy scales in a multi-atom cavity quantum electrodynamical (cavity QED) system, and demonstrate how such behaviors can be exploited in the design of all-optical memory and modulation devices. The data are analyzed using a semiclassical model that explicitly treats heterogeneous coupling of atoms to the cavity mode. Our results highlight the interest of cavity QED systems for ultra-low power photonic signal processing as well as for fundamental studies of mesoscopic nonlinear dynamics. △ Less

Submitted 6 August, 2013; v1 submitted 5 May, 2013; originally announced May 2013.

Comments: 5 pages, 3 figures, Supplemental Information included as ancillary file

Spatially developing turbulent boundary layer on a flat plate

Authors: J. H. Lee, Y. S. Kwon, N. Hutchins, J. P. Monty

Abstract: This fluid dynamics video submitted to the Gallery of Fluid motion shows a turbulent boundary layer developing under a 5 metre-long flat plate towed through water. A stationary imaging system provides a unique view of the developing boundary layer as it would form over the hull of a ship or fuselage of an aircraft. The towed plate permits visualisation of the zero-pressure-gradient turbulent bound… ▽ More This fluid dynamics video submitted to the Gallery of Fluid motion shows a turbulent boundary layer developing under a 5 metre-long flat plate towed through water. A stationary imaging system provides a unique view of the developing boundary layer as it would form over the hull of a ship or fuselage of an aircraft. The towed plate permits visualisation of the zero-pressure-gradient turbulent boundary layer as it develops from the trip to a high Reynolds number state ($Re_τたう\approx 3000$). An evolving large-scale coherent structure will appear almost stationary in this frame of reference. The visualisations provide an unique view of the evolution of fundamental processes in the boundary layer (such as interfacial bulging, entrainment, vortical motions, etc.). In the more traditional laboratory frame of reference, in which fluid passes over a stationary body, it is difficult to observe the full evolution and lifetime of turbulent coherent structures. An equivalent experiment in a wind/water-tunnel would require a camera and laser that moves with the flow, effectively `chasing' eddies as they advect downstream. △ Less

Submitted 14 October, 2012; originally announced October 2012.

Comments: This submission contains two video files for the Gallery of Fluid Motion

Absolute frequency measurement of 1S0 (F = 1/2) - 3P0 (F = 1/2) transition of 171Yb atoms in a one-dimensional optical lattice at KRISS

Authors: Chang Yong Park, Dai-Hyuk Yu, Won-Kyu Lee, Sang Eon Park, Eok Bong Kim, Sun Kyung Lee, Jun Woo Cho, Tai Hyun Yoon, Jongchul Mun, Sung Jong Park, Taeg Yong Kwon, Sang-Bum Lee

Abstract: We measured the absolute frequency of the optical clock transition 1S0 (F = 1/2) - 3P0 (F = 1/2) of 171Yb atoms confined in a one-dimensional optical lattice and it was determined to be 518 295 836 590 863.5(8.1) Hz. The frequency was measured against Terrestrial Time (TT; the SI second on the geoid) by using an optical frequency comb of which the frequency was phase-locked to an H-maser as a flyw… ▽ More We measured the absolute frequency of the optical clock transition 1S0 (F = 1/2) - 3P0 (F = 1/2) of 171Yb atoms confined in a one-dimensional optical lattice and it was determined to be 518 295 836 590 863.5(8.1) Hz. The frequency was measured against Terrestrial Time (TT; the SI second on the geoid) by using an optical frequency comb of which the frequency was phase-locked to an H-maser as a flywheel oscillator traceable to TT. The magic wavelength was also measured as 394 798.48(79) GHz. The results are in good agreement with two previous measurements of other institutes within the specified uncertainty of this work. △ Less

Submitted 25 January, 2013; v1 submitted 27 December, 2011; originally announced December 2011.

Comments: 11 pages, 10 figures, 1 Table

Decoupled algorithm for transient viscoelastic flow modeling and description of elastic flow instability

Authors: Youngdon Kwon

Abstract: In the finite element analysis with fast decoupled time integration scheme for viscoelastic fluid (the Leonov model) flow, we investigate strong nonlinear behavior in 2D creeping contraction flow. The algorithm is applicable in the whole range of the retardation parameter. In the analysis of steady solutions, there exists upper convergence limit of available numerical solutions in this contraction… ▽ More In the finite element analysis with fast decoupled time integration scheme for viscoelastic fluid (the Leonov model) flow, we investigate strong nonlinear behavior in 2D creeping contraction flow. The algorithm is applicable in the whole range of the retardation parameter. In the analysis of steady solutions, there exists upper convergence limit of available numerical solutions in this contraction flow that is free from the frustrating mesh dependence when we incorporate the tensor-logarithmic formulation [Fattal and Kupferman, JNNFM, 2004]. With adjustment of a nonlinear parameter, 2 kinds of fluid have been chosen for flow modeling such as highly shear thinning and Boger-type liquids. According to the type of such property, the transient modeling has revealed distinct flow dynamics of elastic instability. With pressure difference imposed slightly below the steady limit, the result demonstrates fluctuating solution without approaching steady state for the shear thinning fluid. From it, we conclude that the existence of upper limit for convergent steady solution possibly implies transition to spatially as well as temporally varying flow field without steady asymptotic. Under the pressure fairly higher than the limit, the result expresses severe fluctuation of flowrate, oscillation of corner vortices and also asymmetric irregular wave propagation along the downstream wall. In addition, flow dynamics seems quite stochastic with almost no temporal correlation. For the Boger-type fluid, under the traction higher than steady limit the flowrate and corner vortices exhibit periodic oscillation with flow asymmetry. Both types of instability express purely elastic instability in this inertialess flow approximation. △ Less

Submitted 1 November, 2011; originally announced November 2011.

Artificial DNA Lattice Fabrication by Non-Complementarity and Geometrical Incompatibility

Authors: Jihoon Shin, Junghoon Kim, Rashid Amin, Seungjae Kim, Young Hun Kwon, Sung Ha Park

Abstract: Fabrication of DNA nanostructures primarily follows two fundamental rules. First, DNA oligonucleotides mutually combine by Watson-Crick base pairing rules between complementary base sequences. Second, the geometrical compatibility of the DNA oligonucleotide must match for lattices to form. Here we present a fabrication scheme of DNA nanostructures with non-complementary and/or geometrically incomp… ▽ More Fabrication of DNA nanostructures primarily follows two fundamental rules. First, DNA oligonucleotides mutually combine by Watson-Crick base pairing rules between complementary base sequences. Second, the geometrical compatibility of the DNA oligonucleotide must match for lattices to form. Here we present a fabrication scheme of DNA nanostructures with non-complementary and/or geometrically incompatible DNA oligonucleotides, which contradicts conventional DNA structure creation rules. Quantitative analyses of DNA lattice sizes were carried out to verify the unfavorable binding occurrences which correspond to errors in algorithmic self-assembly. Further studies of these types of bindings may shed more light on the exact mechanisms at work in the self-assembly of DNA nanostructures. △ Less

Submitted 30 May, 2011; originally announced May 2011.

Comments: 14 pages, 3 figures, ACS Nano (2011); Accepted to ACS Nano, supplementary information can be found at http://pubs.acs.org/doi/abs/10.1021/nn201312g

Belle II Technical Design Report

Authors: T. Abe, I. Adachi, K. Adamczyk, S. Ahn, H. Aihara, K. Akai, M. Aloi, L. Andricek, K. Aoki, Y. Arai, A. Arefiev, K. Arinstein, Y. Arita, D. M. Asner, V. Aulchenko, T. Aushev, T. Aziz, A. M. Bakich, V. Balagura, Y. Ban, E. Barberio, T. Barvich, K. Belous, T. Bergauer, V. Bhardwaj , et al. (387 additional authors not shown)

Abstract: The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr… ▽ More The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector. △ Less

Submitted 1 November, 2010; originally announced November 2010.

Comments: Edited by: Z. Doležal and S. Uno

Report number: KEK Report 2010-1

Study of the interactions of pions in the CALICE silicon-tungsten calorimeter prototype

Authors: C. Adloff, Y. Karyotakis, J. Repond, J. Yu, G. Eigen, Y. Mikami, N. K. Watson, J. A. Wilson, T. Goto, G. Mavromanolakis, M. A. Thomson, D. R. Ward, W. Yan, D. Benchekroun, A. Hoummada, Y. Khoulaki, J. Apostolakis, A. Ribon, V. Uzhinskiy, M. Benyamna, C. Cârloganu, F. Fehr, P. Gay, G. C. Blazey, D. Chakraborty , et al. (133 additional authors not shown)

Abstract: A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to 80 GeV. The analysis described here focuses on the interactions of pions in the calorimeter. One of the main objectives of the CALICE program is to validate the Monte Carlo tools available for the… ▽ More A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to 80 GeV. The analysis described here focuses on the interactions of pions in the calorimeter. One of the main objectives of the CALICE program is to validate the Monte Carlo tools available for the design of a full-sized detector. The interactions of pions in the Si-W calorimeter are therefore confronted with the predictions of various physical models implemented in the GEANT4 simulation framework. △ Less

Submitted 28 April, 2010; originally announced April 2010.

Journal ref: JINST 5:P05007,2010

Construction and Commissioning of the CALICE Analog Hadron Calorimeter Prototype

Authors: C. Adloff, Y. Karyotakis, J. Repond, A. Brandt, H. Brown, K. De, C. Medina, J. Smith, J. Li, M. Sosebee, A. White, J. Yu, T. Buanes, G. Eigen, Y. Mikami, O. Miller, N. K. Watson, J. A. Wilson, T. Goto, G. Mavromanolakis, M. A. Thomson, D. R. Ward, W. Yan, D. Benchekroun, A. Hoummada , et al. (205 additional authors not shown)

Abstract: An analog hadron calorimeter (AHCAL) prototype of 5.3 nuclear interaction lengths thickness has been constructed by members of the CALICE Collaboration. The AHCAL prototype consists of a 38-layer sandwich structure of steel plates and highly-segmented scintillator tiles that are read out by wavelength-shifting fibers coupled to SiPMs. The signal is amplified and shaped with a custom-designed ASIC.… ▽ More An analog hadron calorimeter (AHCAL) prototype of 5.3 nuclear interaction lengths thickness has been constructed by members of the CALICE Collaboration. The AHCAL prototype consists of a 38-layer sandwich structure of steel plates and highly-segmented scintillator tiles that are read out by wavelength-shifting fibers coupled to SiPMs. The signal is amplified and shaped with a custom-designed ASIC. A calibration/monitoring system based on LED light was developed to monitor the SiPM gain and to measure the full SiPM response curve in order to correct for non-linearity. Ultimately, the physics goals are the study of hadron shower shapes and testing the concept of particle flow. The technical goal consists of measuring the performance and reliability of 7608 SiPMs. The AHCAL was commissioned in test beams at DESY and CERN. The entire prototype was completed in 2007 and recorded hadron showers, electron showers and muons at different energies and incident angles in test beams at CERN and Fermilab. △ Less

Submitted 12 March, 2010; originally announced March 2010.

Comments: 36 pages, 32 figures

Report number: DESY 10-032

Journal ref: JINST 5 (2010) P05004

Quantum mechanism of Biological Search

Authors: Younghun Kwon

Abstract: We wish to suggest an algorithm for biological search including DNA search. Our argument supposes that biological search be performed by quantum search.If we assume this, we can naturally answer the following long lasting puzzles such that "Why does DNA use the helix structure?" and "How can the evolution in biological system occur?". We wish to suggest an algorithm for biological search including DNA search. Our argument supposes that biological search be performed by quantum search.If we assume this, we can naturally answer the following long lasting puzzles such that "Why does DNA use the helix structure?" and "How can the evolution in biological system occur?". △ Less

Submitted 9 May, 2006; originally announced May 2006.

Deep level emission of ZnO nanoparticles deposited inside UV opal

Authors: S. M. Abrarov, Sh. U. Yuldashev, T. W. Kim, Y. H. Kwon, T. W. Kang

Abstract: The temperature-dependent photoluminescence (PL) spectra of zinc oxide (ZnO) nanocrystals deposited inside the ultraviolet (UV) opal were studied. ZnO was grown in the voids between FCC packed silicon dioxide spheres using spray pyrolysis under ultrasonic vibration in the solution containing a zinc nitrate precursor. The ZnO nanoparticles inside opal matrix with UV photonic band-gap exhibit supp… ▽ More The temperature-dependent photoluminescence (PL) spectra of zinc oxide (ZnO) nanocrystals deposited inside the ultraviolet (UV) opal were studied. ZnO was grown in the voids between FCC packed silicon dioxide spheres using spray pyrolysis under ultrasonic vibration in the solution containing a zinc nitrate precursor. The ZnO nanoparticles inside opal matrix with UV photonic band-gap exhibit suppression of the excitonic emission and enhancement of the deep level emission. Suppression of the excitonic lines is due to the inhibition of spontaneous emission, while enhancement and broadening of the DL emission in the green spectral region is due to Purcell effect. The infiltration of ZnO inside the photonic crystal may be a useful technique to increase its emission efficiency in the selected spectral region. △ Less

Submitted 21 August, 2005; originally announced August 2005.

Comments: 22 pages, 4 figures

Journal ref: Opt. Commun. 259 (1) (2006) 378-384

Nanoscale Quantum Solvation of para-H$_2$ around the Linear OCS Molecule inside $^4$He Droplets

Authors: Yongkyung Kwon, K. Birgitta Whaley

Abstract: We present a microscopic analysis of the quantum solvation structures of para-H$_2$ around the OCS molecule when embedded in low temperature $^4$He droplets. The structures of clusters containing M=5 and 6 para-H$_2$ molecules are compared with corresponding structures for M=1 (OCS-H$_2$ complex) and M=17 (a full solvation shell), as well as with the clusters in the absence of helium. We find th… ▽ More We present a microscopic analysis of the quantum solvation structures of para-H$_2$ around the OCS molecule when embedded in low temperature $^4$He droplets. The structures of clusters containing M=5 and 6 para-H$_2$ molecules are compared with corresponding structures for M=1 (OCS-H$_2$ complex) and M=17 (a full solvation shell), as well as with the clusters in the absence of helium. We find that the helium has negligible effect on the structures for the small and large OCS(H$_2$)$_M$ clusters, but that it modifies the cluster structure for M=6. We discuss implications of these results for the onset of superfluidity in the solvating hydrogen shell and for spectroscopic measurements. △ Less

Submitted 12 December, 2003; originally announced December 2003.

Comments: 4 pages, 2 figures, accepted for publication in J. Low Temp. Phys

The finite-temperature Monte Carlo method and its application to superfluid helium clusters

Authors: Patrick Huang, Yongkyung Kwon, K. Birgitta Whaley

Abstract: We review the use of the path integral Monte Carlo (PIMC) methodology to the study of finite-size quantum clusters, with particular emphasis on recent applications to pure and impurity-doped He clusters. We describe the principles of PIMC, the use of the multilevel Metropolis method for sampling particle permutations, and the methods used to accurately incorporate anisotropic molecule-helium int… ▽ More We review the use of the path integral Monte Carlo (PIMC) methodology to the study of finite-size quantum clusters, with particular emphasis on recent applications to pure and impurity-doped He clusters. We describe the principles of PIMC, the use of the multilevel Metropolis method for sampling particle permutations, and the methods used to accurately incorporate anisotropic molecule-helium interactions into the path integral scheme. Applications to spectroscopic studies of embedded atoms and molecules are summarized, with discussion of the new concepts of local and nanoscale superfluidity that have been generated by recent PIMC studies of the impurity-doped He clusters. △ Less

Submitted 30 April, 2002; originally announced April 2002.

Comments: P. Huang, Y. Kwon, and K. B. Whaley, in "Quantum Fluids in Confinement", Vol. 4 of "Advances in Quantum Many-Body Theories", edited by E. Krotscheck and J. Navarro (World Scientific, Singapore, 2002), in press

Two-pion correlations in Au+Au collisions at 10.8 GeV/c per nucleon

Authors: E877 Collaboration, J. Barrette, R. Bellwied, S. Bennett, R. Bersch, P. Braun-Munzinger, W. C. Chang, W. E. Cleland, J. D. Cole, T. M. Cormier, G. David, J. Dee, O. Dietzsch, M. W. Drigert, S. Gilbert, J. R. Hall, T. K. Hemmick, N. Herrmann, B. Hong, C. L. Jiang, S. C. Johnson, Y. Kwon, R. Lacasse, A. Lukaszew, Q. Li , et al. (26 additional authors not shown)

Abstract: Two-particle correlation functions for positive and negative pions have been measured in Au+Au collisions at 10.8~GeV/c per nucleon. The data were analyzed using one- and three-dimensional correlation functions. From the results of the three-dimensional fit the phase space density of pions was calculated. It is consistent with local thermal equilibrium. Two-particle correlation functions for positive and negative pions have been measured in Au+Au collisions at 10.8~GeV/c per nucleon. The data were analyzed using one- and three-dimensional correlation functions. From the results of the three-dimensional fit the phase space density of pions was calculated. It is consistent with local thermal equilibrium. △ Less

Submitted 7 February, 1997; originally announced February 1997.

Comments: 5 pages RevTeX (including 3 Figures)

Journal ref: Phys.Rev.Lett.78:2916-2919,1997