-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
WeatherQA: Can Multimodal Language Models Reason about Severe Weather?
Authors:
Chengqian Ma,
Zhanxiang Hua,
Alexandra Anderson-Frey,
Vikram Iyer,
Xin Liu,
Lianhui Qin
Abstract:
Severe convective weather events, such as hail, tornadoes, and thunderstorms, often occur quickly yet cause significant damage, costing billions of dollars every year. This highlights the importance of forecasting severe weather threats hours in advance to better prepare meteorologists and residents in at-risk areas. Can modern large foundation models perform such forecasting? Existing weather ben…
▽ More
Severe convective weather events, such as hail, tornadoes, and thunderstorms, often occur quickly yet cause significant damage, costing billions of dollars every year. This highlights the importance of forecasting severe weather threats hours in advance to better prepare meteorologists and residents in at-risk areas. Can modern large foundation models perform such forecasting? Existing weather benchmarks typically focus only on predicting time-series changes in certain weather parameters (e.g., temperature, moisture) with text-only features. In this work, we introduce WeatherQA, the first multimodal dataset designed for machines to reason about complex combinations of weather parameters (a.k.a., ingredients) and predict severe weather in real-world scenarios. The dataset includes over 8,000 (multi-images, text) pairs for diverse severe weather events. Each pair contains rich information crucial for forecasting -- the images describe the ingredients capturing environmental instability, surface observations, and radar reflectivity, and the text contains forecast analyses written by human experts. With WeatherQA, we evaluate state-of-the-art vision language models, including GPT4, Claude3.5, Gemini-1.5, and a fine-tuned Llama3-based VLM, by designing two challenging tasks: (1) multi-choice QA for predicting affected area and (2) classification of the development potential of severe convection. These tasks require deep understanding of domain knowledge (e.g., atmospheric dynamics) and complex reasoning over multimodal data (e.g., interactions between weather parameters). We show a substantial gap between the strongest VLM, GPT4o, and human reasoning. Our comprehensive case study with meteorologists further reveals the weaknesses of the models, suggesting that better training and data integration are necessary to bridge this gap. WeatherQA link: https://github.com/chengqianma/WeatherQA.
△ Less
Submitted 23 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Realization of a cold atom gyroscope in space
Authors:
Jinting Li,
Xi Chen,
Danfang Zhang,
Wenzhang Wang,
Yang Zhou,
Meng He,
Jie Fang,
Lin Zhou,
Chuan He,
Junjie Jiang,
Huanyao Sun,
Qunfeng Chen,
Lei Qin,
Xiao Li,
Yibo Wang,
Xiaowei Zhang,
Jiaqi Zhong,
Runbing Li,
Meizhen An,
Long Zhang,
Shuquan Wang,
Zongfeng Li,
Jin Wang,
Mingsheng Zhan
Abstract:
High precision gyroscopes in space are important for sophisticated scientific experiments and deep space navigation. Microgravity in the space provides an ideal condition for operation of a cold atom gyroscope. To demonstrate this advantage, an atom interferometer (AI) was launched and installed in the China Space Station in 2022. Here reported is a realization of the cold atom gyroscope with this…
▽ More
High precision gyroscopes in space are important for sophisticated scientific experiments and deep space navigation. Microgravity in the space provides an ideal condition for operation of a cold atom gyroscope. To demonstrate this advantage, an atom interferometer (AI) was launched and installed in the China Space Station in 2022. Here reported is a realization of the cold atom gyroscope with this AI. By applying point source interferometry, spatial fringes are obtained and acceleration and rotation are extracted. The angles of the Raman lasers are precisely calibrated to avoid measurement error, and other systematic errors are also considered for the rotation measurement. The evaluated rotation measurement is (-115.64+/-1.71)*10^-5 rad/s in space, and an acceleration measurement resolution of 1.03*10^-6 m/s^2 is also obtained for a single image. This study conducts the first AI-based gyroscope in space and paves a way for future space-based AI experiments.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Shock wave generation and propagation in dissipative and nonlocal nonlinear Rydberg media
Authors:
Lu Qin,
Chao Hang,
Guoxiang Huang,
Weibin Li
Abstract:
We investigate the generation of optical shock waves in strongly interacting Rydberg atomic gases with a spatially homogeneous dissipative potential. The Rydberg atom interaction induces an optical nonlocal nonlinarity. We focus on local nonlinear ($R_b\ll R_0$) and nonlocal nonlinear ($R_b\sim R_0$) regimes, where $R_b$ and $R_0$ are the characteristic length of the Rydberg nonlinearity and beam…
▽ More
We investigate the generation of optical shock waves in strongly interacting Rydberg atomic gases with a spatially homogeneous dissipative potential. The Rydberg atom interaction induces an optical nonlocal nonlinarity. We focus on local nonlinear ($R_b\ll R_0$) and nonlocal nonlinear ($R_b\sim R_0$) regimes, where $R_b$ and $R_0$ are the characteristic length of the Rydberg nonlinearity and beam width, respectively. In the local regime, we show spatial width and contrast of the shock wave change monotonically when increasing strength of the dissipative potential and optical intensity. In the nonlocal regime, the characteristic quantity of the shock wave depend on $R_b/R_0$ and dissipative potential nontrivially and on the intensity monotonically. We find that formation of shock waves dominantly takes place when $R_b$ is smaller than $R_0$, while the propagation dynamics is largely linear when $R_b$ is comparable to or larger than $R_0$. Our results reveal nontrivial roles played by dissipation and nonlocality in the generation of shock waves, and provide a route to manipulate their profiles and stability. Our study furthermore opens new avenues to explore non-Hermitian physics, and nonlinear wave generation and propagation by controlling dissipation and nonlocality in the Rydberg media.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Drive Current Boost in Double-Channeled Nanotube Gate all Around Field Effect Transistor
Authors:
Laixiang Qin,
Chunlai Li,
Yiqun Wei,
Zhangwei Xu,
Jin He,
Yandong He,
Yutao Yue
Abstract:
We demonstrate an exotic doubled-channeled NT GAAFET (DC NT GAAFET) structure with Ion boost in comparison with NT GAAFET and NW GAAFET with the same footprint. Ion gains of 64.8% and 1.7 times have been obtained in DC NT GAAFET in compared with NT GAAFET and NW GAAFET. Ioff of DC NT GAAFET degrades by 61.8% than that of NT GAAFET, SS is almost comparable in two kinds of device structures, whereas…
▽ More
We demonstrate an exotic doubled-channeled NT GAAFET (DC NT GAAFET) structure with Ion boost in comparison with NT GAAFET and NW GAAFET with the same footprint. Ion gains of 64.8% and 1.7 times have been obtained in DC NT GAAFET in compared with NT GAAFET and NW GAAFET. Ioff of DC NT GAAFET degrades by 61.8% than that of NT GAAFET, SS is almost comparable in two kinds of device structures, whereas Ion/Ioff ratio in DC NT GAAFET still gains subtly, by 2.4%, than NT GAAFET thanks to the substantial Ion aggrandizement, indicating the sustained superior gate electrostatic controllability in DC NT GAAFET with regarding to NT GAAFET regardless of additional channel incorporated. On the other side, both DC NT GAAFET and NT GAAFET exhibit superior device performance than NW GAAFET in terms of high operation speed and better electrostatic controllability manifested by suppressed SCEs.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
The space cold atom interferometer for testing the equivalence principle in the China Space Station
Authors:
Meng He,
Xi Chen,
Jie Fang,
Qunfeng Chen,
Huanyao Sun,
Yibo Wang,
Jiaqi Zhong,
Lin Zhou,
Chuan He,
Jinting Li,
Danfang Zhang,
Guiguo Ge,
Wenzhang Wang,
Yang Zhou,
Xiao Li,
Xiaowei Zhang,
Lei Qin,
Zhiyong Chen,
Rundong Xu,
Yan Wang,
Zongyuan Xiong,
Junjie Jiang,
Zhendi Cai,
Kuo Li,
Guo Zheng
, et al. (3 additional authors not shown)
Abstract:
The precision of the weak equivalence principle (WEP) test using atom interferometers (AIs) is expected to be extremely high in microgravity environment. The microgravity scientific laboratory cabinet (MSLC) in the China Space Station (CSS) can provide a higher-level microgravity than the CSS itself, which provides a good experimental environment for scientific experiments that require high microg…
▽ More
The precision of the weak equivalence principle (WEP) test using atom interferometers (AIs) is expected to be extremely high in microgravity environment. The microgravity scientific laboratory cabinet (MSLC) in the China Space Station (CSS) can provide a higher-level microgravity than the CSS itself, which provides a good experimental environment for scientific experiments that require high microgravity. We designed and realized a payload of a dual-species cold rubidium atom interferometer. The payload is highly integrated and has a size of 460 mm * 330 mm * 260 mm. It will be installed in the MSLC to carry out high-precision WEP test experiment. In this article, we introduce the constraints and guidelines of the payload design, the compositions and functions of the scientific payload, the expected test precision in space, and some results of the ground test experiments
△ Less
Submitted 20 June, 2023; v1 submitted 6 June, 2023;
originally announced June 2023.
-
The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite
Authors:
Z. X. Ling,
X. J. Sun,
C. Zhang,
S. L. Sun,
G. Jin,
S. N. Zhang,
X. F. Zhang,
J. B. Chang,
F. S. Chen,
Y. F. Chen,
Z. W. Cheng,
W. Fu,
Y. X. Han,
H. Li,
J. F. Li,
Y. Li,
Z. D. Li,
P. R. Liu,
Y. H. Lv,
X. H. Ma,
Y. J. Tang,
C. B. Wang,
R. J. Xie,
Y. L. Xue,
A. L. Yan
, et al. (101 additional authors not shown)
Abstract:
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo…
▽ More
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Gate Electrostatic Controllability Enhancement in Nanotube Gate all Around Field Effect Transistor
Authors:
Laixiang Qin,
Chunlai Li,
Ziang Xie,
Yiqun Wei,
Jin He
Abstract:
Recently, short channel effects (SCE) and power consumption dissipation problems pose big challenges which need imperative actions to be taken to deal with for field effect transistor to further scale down as semiconductor technology enters into sub-10nm technology node. From 3nm technology node and beyond, gate all around field effect transistor steps onto the history stage attributed to its impr…
▽ More
Recently, short channel effects (SCE) and power consumption dissipation problems pose big challenges which need imperative actions to be taken to deal with for field effect transistor to further scale down as semiconductor technology enters into sub-10nm technology node. From 3nm technology node and beyond, gate all around field effect transistor steps onto the history stage attributed to its improved SCE suppressing ability thanks to surrounding gate structure. Herein, we demonstrate the super electrostatic control ability of a double-gated nanotube gate all around field effect transistor (DG NT GAAFET) in comparison with nanotube (NT GAAFET) and nanowire gate all around field effect transistor (NW GAAFET) with the same device parameters designed. Ion boosts of 62% and 57% have been obtained in DG NT GAAFET in comparison with those of NT GAAFET and NW GAAFET. Besides, substantially suppressed SCEs have been obtained in DG NT GAAFET due to enhanced electrostatic control, which are certificated by improved Ioff, SS, and Ion/Ioff ratio obtained. On the other hand, the Ion of NT GAAFET is comparable with that of NW GAA-FET. Whereas, its Ioff is 1 order smaller, and SS is almost 2 times smaller compared with those of NW GAA-FET, manifesting the meliority of nanotube channel structure. In the end, the robustness of nanotube channel structure, especially double gated one, against Lg scaling has been verified with TCAD simulation study.
△ Less
Submitted 30 March, 2023;
originally announced April 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Sim2Real Neural Controllers for Physics-based Robotic Deployment of Deformable Linear Objects
Authors:
Dezhong Tong,
Andrew Choi,
Longhui Qin,
Weicheng Huang,
Jungseock Joo,
M. Khalid Jawed
Abstract:
Deformable linear objects (DLOs), such as rods, cables, and ropes, play important roles in daily life. However, manipulation of DLOs is challenging as large geometrically nonlinear deformations may occur during the manipulation process. This problem is made even more difficult as the different deformation modes (e.g., stretching, bending, and twisting) may result in elastic instabilities during ma…
▽ More
Deformable linear objects (DLOs), such as rods, cables, and ropes, play important roles in daily life. However, manipulation of DLOs is challenging as large geometrically nonlinear deformations may occur during the manipulation process. This problem is made even more difficult as the different deformation modes (e.g., stretching, bending, and twisting) may result in elastic instabilities during manipulation. In this paper, we formulate a physics-guided data-driven method to solve a challenging manipulation task -- accurately deploying a DLO (an elastic rod) onto a rigid substrate along various prescribed patterns. Our framework combines machine learning, scaling analysis, and physical simulations to develop a physics-based neural controller for deployment. We explore the complex interplay between the gravitational and elastic energies of the manipulated DLO and obtain a control method for DLO deployment that is robust against friction and material properties. Out of the numerous geometrical and material properties of the rod and substrate, we show that only three non-dimensional parameters are needed to describe the deployment process with physical analysis. Therefore, the essence of the controlling law for the manipulation task can be constructed with a low-dimensional model, drastically increasing the computation speed. The effectiveness of our optimal control scheme is shown through a comprehensive robotic case study comparing against a heuristic control method for deploying rods for a wide variety of patterns. In addition to this, we also showcase the practicality of our control scheme by having a robot accomplish challenging high-level tasks such as mimicking human handwriting, cable placement, and tying knots.
△ Less
Submitted 10 December, 2023; v1 submitted 4 March, 2023;
originally announced March 2023.
-
Microscopic mechanism of tunable thermal conductivity in carbon nanotube-geopolymer nanocomposites
Authors:
Wenkai Liu,
Ling Qin,
C. Y. Zhao,
Shenghong Ju
Abstract:
Geopolymer has been considered as a green and low-carbon material with great potential application due to its simple synthesis process, environmental protection, excellent mechanical properties, good chemical resistance and durability. In this work, the molecular dynamics simulation is employed to investigate the effect of the size, content and distribution of carbon nanotubes on the thermal condu…
▽ More
Geopolymer has been considered as a green and low-carbon material with great potential application due to its simple synthesis process, environmental protection, excellent mechanical properties, good chemical resistance and durability. In this work, the molecular dynamics simulation is employed to investigate the effect of the size, content and distribution of carbon nanotubes on the thermal conductivity of geopolymer nanocomposites, and the microscopic mechanism is analyzed by the phonon density of states, phonon participation ratio and spectral thermal conductivity, etc. The results show that there is a significant size effect in geopolymer nanocomposites system due to the carbon nanotubes. In addition, when the content of carbon nanotubes is 16.5%, the thermal conductivity in carbon nanotubes vertical axial direction (4.85 W/(mk)) increases 125.6% compared with the system without carbon nanotubes (2.15 W/(mk)). However, the thermal conductivity in carbon nanotubes vertical axial direction (1.25 W/(mk)) decreases 41.9%, which is mainly due to the interfacial thermal resistance and phonon scattering at the interfaces. The above results provide theoretical guidance for the tunable thermal conductivity in carbon nanotube-geopolymer nanocomposites.
△ Less
Submitted 14 February, 2023;
originally announced February 2023.
-
Optimal optical Ferris wheel solitons in a nonlocal Rydberg medium
Authors:
Jia-Bin Qiu,
Lu Qin,
Xing-Dong Zhao,
Jing Qian
Abstract:
We propose a scheme for the creation of stable optical Ferris wheel(OFW) solitons in a nonlocal Rydberg electromagnetically induced transparency(EIT) medium. Depending on a careful optimization to both the atomic density and the one-photon detuning, we obtain an appropriate nonlocal potential provided by the strong interatomic interaction in Rydberg states which can perfectly compensate for the di…
▽ More
We propose a scheme for the creation of stable optical Ferris wheel(OFW) solitons in a nonlocal Rydberg electromagnetically induced transparency(EIT) medium. Depending on a careful optimization to both the atomic density and the one-photon detuning, we obtain an appropriate nonlocal potential provided by the strong interatomic interaction in Rydberg states which can perfectly compensate for the diffraction of the probe OFW field. Numerical results show that the fidelity keeps larger than 0.96 while the propagation distance has exceeded 160 diffraction lengths. Higher-order OFW solitons with arbitrary winding numbers are also discussed. Our study provides a straightforward route to generate spatial optical solitons in the nonlocal response region of cold Rydberg gases.
△ Less
Submitted 14 February, 2023; v1 submitted 13 February, 2023;
originally announced February 2023.
-
Understanding binary phase separation towards Cu-C nanocrystalline-amorphous composites
Authors:
Jiajian Guan,
Qin Jiang,
Yue He,
Xu Zhang,
Bin Liao,
Wei Gao,
Lizhao Qin
Abstract:
The nanocrystalline-amorphous textures are commonly observed in the coatings synthesized by energetic deposition.This work reports a theoretical study towards binary Cu-C phase separation.By performing a MD simulation using the LAMMPS instead of classical PFK methodology, we theoretically explained how the initial pressure and Cu concentration fundamentally determines Cu nanocrystalline's final mo…
▽ More
The nanocrystalline-amorphous textures are commonly observed in the coatings synthesized by energetic deposition.This work reports a theoretical study towards binary Cu-C phase separation.By performing a MD simulation using the LAMMPS instead of classical PFK methodology, we theoretically explained how the initial pressure and Cu concentration fundamentally determines Cu nanocrystalline's final morphology and grain size,which gives a novel insight into binary phase separation and the evolution mechanism of nanocrystalline-amorphous structures during energetic deposition.
△ Less
Submitted 16 July, 2023; v1 submitted 27 November, 2022;
originally announced November 2022.
-
Theoretical analysis of sound propagation and entropy generation across a distributed steady heat source
Authors:
Jiaqi Nan,
Jingxuan Li,
Aimee S. Morgans,
Lizi Qin,
Lijun Yang
Abstract:
Acoustic and entropy waves interacting in a duct with a steady heat source and mean flow are analysed using an asymptotic expansion (AE) for low frequencies. The analytical AE solutions are obtained by taking advantage of flow invariants and applying a multi-step strategy. The proposed solutions provide first-order corrections to the compact model in the form of integrals of mean flow variables. A…
▽ More
Acoustic and entropy waves interacting in a duct with a steady heat source and mean flow are analysed using an asymptotic expansion (AE) for low frequencies. The analytical AE solutions are obtained by taking advantage of flow invariants and applying a multi-step strategy. The proposed solutions provide first-order corrections to the compact model in the form of integrals of mean flow variables. An eigenvalue system is then built to predict the thermoacoustic modes of a duct containing a distributed heat source or sink. Predictions from the AE solutions agree well with the numerical results of the linearised Euler equations for both frequencies and growth rates, as long as the low-frequency condition is satisfied. The AE solutions are able to accurately reconstruct the acoustic and entropy waves and correct the significant errors in the predicted entropy wave associated with the compact model. The analysis illustrates that the thermoacoustic system needs to account for the entropy wave generated by the interaction of acoustic wave and the distributed steady heat source, especially when density- or entropy-dependent boundary conditions are prescribed at the duct ends. Furthermore, a combination of the AE method and the modified WKB approximation method is discussed for a cooling case. The AE solutions remedy the disadvantage of the WKB solution in the low and very low-frequency domain and facilitate full-frequency theoretical analyses of sound propagation and entropy generation in inhomogeneous duct flow fields.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
Stable high-dimensional weak-light soliton molecules and their active control
Authors:
Lu Qin,
Chao Hang,
Boris A. Malomed,
Guoxiang Huang
Abstract:
Bound states of solitons, alias soliton molecules (SMs), are well known in one-dimensional (1D) systems, while making stable bound states of multidimensional solitons is a challenging problem because of the underlying instabilities. Here we propose a scheme for the creation of stable (2+1)D and (3+1)D optical SMs in a gas of cold Rydberg atoms, in which electromagnetically induced transparency (EI…
▽ More
Bound states of solitons, alias soliton molecules (SMs), are well known in one-dimensional (1D) systems, while making stable bound states of multidimensional solitons is a challenging problem because of the underlying instabilities. Here we propose a scheme for the creation of stable (2+1)D and (3+1)D optical SMs in a gas of cold Rydberg atoms, in which electromagnetically induced transparency (EIT) is induced by a control laser field. We show that, through the interplay of the EIT and the strong long-range interaction between the Rydberg atoms, the system gives rise to giant nonlocal Kerr nonlinearity, which in turn supports stable (2+1)D spatial optical SMs, as well as ring-shaped soliton necklaces, including rotating ones. They feature a large size, low generation power, and can be efficiently manipulated by tuning the nonlocality degree of the Kerr nonlinearity. Stable (3+1)D spatiotemporal optical SMs, composed of fundamental or vortex solitons, with low power and ultraslow propagation velocity, can also be generated in the system. These SMs can be stored and retrieved through the switching off and on of the control laser field. The findings reported here suggest applications to data processing and transmission in optical systems.
△ Less
Submitted 14 July, 2022; v1 submitted 5 June, 2022;
originally announced June 2022.
-
Symmetry-protected higher-order exceptional points in staggered flatband rhombic lattices
Authors:
Yingying Zhang,
Shiqiang Xia,
Xingdong Zhao,
Lu Qin,
Xuejing Feng,
Wenrong Qi,
Yajing Jiang,
Hai Lu,
Daohong Song,
Liqin Tang,
Zunlue Zhu,
Yufang Liu
Abstract:
Higher-order exceptional points (EPs), which appear as multifold degeneracies in the spectra of non-Hermitian systems, are garnering extensive attention in various multidisciplinary fields. However, constructing higher-order EPs still remains as a challenge due to the strict requirement of the system symmetries. Here we demonstrate that higher-order EPs can be judiciously fabricated in PT -symmetr…
▽ More
Higher-order exceptional points (EPs), which appear as multifold degeneracies in the spectra of non-Hermitian systems, are garnering extensive attention in various multidisciplinary fields. However, constructing higher-order EPs still remains as a challenge due to the strict requirement of the system symmetries. Here we demonstrate that higher-order EPs can be judiciously fabricated in PT -symmetric staggered rhombic lattices by introducing not only on-site gain/loss but also nonHermitian couplings. Zero-energy flatbands persist and symmetry-protected third-order EPs (EP3) arise in these systems owing to the non-Hermitian chiral/sublattice symmetry, but distinct phase transitions and propagation dynamics occur. Specifically, the EP3 arises at the Brillouin zone (BZ) boundary in the presence of on-site gain/loss. The single-site excitations display an exponential power increase in the PT -broken phase. Meanwhile, a nearly flatband sustains when a small lattice perturbation is applied. For the lattices with non-Hermitian couplings, however, the EP3 appears at the BZ center. Quite remarkably, our analysis unveils a dynamical delocalization-localization transition for the excitation of the dispersive bands and a quartic power increase beyond the EP3. Our scheme provides a new platform towards the investigation of the higher-order EPs, and can be further extended to the study of topological phase transitions or nonlinear processes associated with higher-order EPs.
△ Less
Submitted 30 July, 2022; v1 submitted 2 June, 2022;
originally announced June 2022.
-
Plasma absorption levelling by phase coherence in meta-surface stacked structure
Authors:
Xing-Yu Xu,
Zhong-Zhu Liang,
Li Qin,
Xue-Mei Su
Abstract:
In this paper, we propose a MIM (metallic metasurface-insulator-metal) stacked structure to realize perfect absorption in mid- and far- infrared bandwidth. A large number of metallic composite metallic units placed on a uniform layer of insulator Ge which is deposited on a uniform metallic Ti surface. Each of units consists of four right-angled triangular cubes in middle of four sides of a square.…
▽ More
In this paper, we propose a MIM (metallic metasurface-insulator-metal) stacked structure to realize perfect absorption in mid- and far- infrared bandwidth. A large number of metallic composite metallic units placed on a uniform layer of insulator Ge which is deposited on a uniform metallic Ti surface. Each of units consists of four right-angled triangular cubes in middle of four sides of a square. Three resonant absorption peaks can be discrete or levelling dependent to thickness of cubes. Once metallic cubes are thinner than its skin depth, an effective ultra-broadband absorber is realizable with average absorption over 90% percent ranging from 8-14μm. We build a four-level cavity-dipole interacting model to explain phenomena of plasma absorption levelling. This is created by strong phase coherence from meta-surface since three hybrid modes are coupled by common cavity photons in arrays of micro-cavities between top and below metallic layers. The structure is polarization-selective to infrared light. It has great potential in infrared detection and imaging.
△ Less
Submitted 18 May, 2022;
originally announced May 2022.
-
Giant Kerr nonlinearities and magneto-optical rotations in a Rydberg-atom gas via double electromagnetically induced transparency
Authors:
Yue Mu,
Lu Qin,
Zeyun Shi,
Guoxiang Huang
Abstract:
We investigate the Kerr and magneto-optical effects for a probe laser field with two orthogonally polarized components, propagating in a cold Rydberg atomic gas with an inverted-Y-type level configuration via double electromagnetically induced transparency (EIT). Through an approach beyond both mean-field and ground-state approximations, we make detailed calculations on third-order nonlinear optic…
▽ More
We investigate the Kerr and magneto-optical effects for a probe laser field with two orthogonally polarized components, propagating in a cold Rydberg atomic gas with an inverted-Y-type level configuration via double electromagnetically induced transparency (EIT). Through an approach beyond both mean-field and ground-state approximations, we make detailed calculations on third-order nonlinear optical susceptibilities and show that the system possesses giant nonlocal selfand cross-Kerr nonlinearities contributed by Rydberg-Rydberg interaction. The theoretical result of the cross-Kerr nonlinearity obtained for 85Rb atomic gas is very close to the experimental one reported recently. Moreover, we demonstrate that the probe laser field can acquire a very large magnetooptical rotation via the double EIT, which may be used to design atomic magnetometers with high precision. The results presented here are promising not only for the development of nonlocal nonlinear magneto-optics but also for applications in precision measurement and optical information processing and transmission based on Rydberg atomic gases.
△ Less
Submitted 21 April, 2021;
originally announced April 2021.
-
JeLLyFysh-Version1.0 -- a Python application for all-atom event-chain Monte Carlo
Authors:
Philipp Hoellmer,
Liang Qin,
Michael F. Faulkner,
A. C. Maggs,
Werner Krauth
Abstract:
We present JeLLyFysh-Version1.0, an open-source Python application for event-chain Monte Carlo (ECMC), an event-driven irreversible Markov-chain Monte Carlo algorithm for classical N-body simulations in statistical mechanics, biophysics and electrochemistry. The application's architecture closely mirrors the mathematical formulation of ECMC. Local potentials, long-ranged Coulomb interactions and m…
▽ More
We present JeLLyFysh-Version1.0, an open-source Python application for event-chain Monte Carlo (ECMC), an event-driven irreversible Markov-chain Monte Carlo algorithm for classical N-body simulations in statistical mechanics, biophysics and electrochemistry. The application's architecture closely mirrors the mathematical formulation of ECMC. Local potentials, long-ranged Coulomb interactions and multi-body bending potentials are covered, as well as bounding potentials and cell systems including the cell-veto algorithm. Configuration files illustrate a number of specific implementations for interacting atoms, dipoles, and water molecules.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
Near 100% CO Selectivity in Nanoscaled Iron-Based Oxygen Carriers for Chemical Looping Methane Partial Oxidation
Authors:
Yan Liu,
Lang Qin,
Zhuo Cheng,
Josh W. Goetze,
Fanhe Kong,
Jonathan A. Fan,
Liang-shih Fan
Abstract:
Chemical looping methane partial oxidation provides an energy and cost effective route for methane utilization. However, there is considerable CO2 co-production in state-of-the-art chemical looping systems, rendering a decreased productivity in value-added fuels or chemicals. In this work, we show that the co-production of CO2 can be dramatically suppressed in methane partial oxidation reactions u…
▽ More
Chemical looping methane partial oxidation provides an energy and cost effective route for methane utilization. However, there is considerable CO2 co-production in state-of-the-art chemical looping systems, rendering a decreased productivity in value-added fuels or chemicals. In this work, we show that the co-production of CO2 can be dramatically suppressed in methane partial oxidation reactions using iron oxide nanoparticles, with a size of 2~8 nm, as the oxygen carrier. To stabilize these nanoparticles at high temperatures, they are embedded in an ordered, gas-permeable mesoporous silica matrix. We experimentally obtained near 100% CO selectivity in a cyclic redox system at 750°C to 935°C, which is a significantly lower temperature range than in conventional oxygen carrier systems. Density functional theory calculations elucidate the origins for such selectivity and reveal that CH4 adsorption energies decrease with increasing nanoparticle size. These calculations also show that low-coordinated lattice oxygen atoms on the surface of nanoparticles significantly promote Fe-O bond cleavage and CO formation. We envision that embedded nanostructured oxygen carriers have the potential to serve as a general materials platform for achieving 100% selectivity in redox reactions at high temperatures.
△ Less
Submitted 26 June, 2019;
originally announced June 2019.
-
Luminosity measurements for the R scan experiment at BESIII
Authors:
M. Ablikim,
M. N. Achasov,
S. Ahmed,
X. C. Ai,
O. Albayrak,
M. Albrecht,
D. J. Ambrose,
A. Amoroso,
F. F. An,
Q. An,
J. Z. Bai,
O. Bakina,
R. Baldini Ferroli,
Y. Ban,
D. W. Bennett,
J. V. Bennett,
N. Berger,
M. Bertani,
D. Bettoni,
J. M. Bian,
F. Bianchi,
E. Boger,
I. Boyko,
R. A. Briere,
H. Cai
, et al. (405 additional authors not shown)
Abstract:
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measur…
▽ More
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measured at the different c.m. energies, individually. The results are the important inputs for R value and $J/ψ$ resonance parameter measurements.
△ Less
Submitted 11 February, 2017;
originally announced February 2017.
-
An electro-optic waveform interconnect based on quantum interference
Authors:
Li-Guo Qin,
Zhong-Yang Wang,
Shang-Qing Gong
Abstract:
The ability to modulate an optical field via an electric field is regarded as a key function of electro-optic interconnects, which are used in optical communications and information processing systems. One of the main required devices for such interconnects is the electro-optic modulator (EOM). Current EOM based on the electro-optic effect and the electro-absorption effect often is bulky and power…
▽ More
The ability to modulate an optical field via an electric field is regarded as a key function of electro-optic interconnects, which are used in optical communications and information processing systems. One of the main required devices for such interconnects is the electro-optic modulator (EOM). Current EOM based on the electro-optic effect and the electro-absorption effect often is bulky and power inefficient due to the weak electro-optic properties of its constituent materials. Here we propose a new mechanism to produce an arbitrary-waveform EOM based on the quantum interference, in which both the real and imaginary parts of the susceptibility are engineered coherently with the superhigh efficiency. Based on this EOM, a waveform interconnect from the voltage to the modulated optical absorption is realised. We expect that such a new type of electro-optic interconnect will have a broad range of applications including the optical communications and network.
△ Less
Submitted 24 February, 2016;
originally announced February 2016.
-
Measurements of Baryon Pair Decays of $χ_{cJ}$ Mesons
Authors:
M. Ablikim,
M. N. Achasov,
O. Albayrak,
D. J. Ambrose,
F. F. An,
Q. An,
J. Z. Bai,
Y. Ban,
J. Becker,
J. V. Bennett,
M. Bertani,
J. M. Bian,
E. Boger,
O. Bondarenko,
I. Boyko,
R. A. Briere,
V. Bytev,
X. Cai,
O. Cakir,
A. Calcaterra,
G. F. Cao,
S. A. Cetin,
J. F. Chang,
G. Chelkov,
G. Chen
, et al. (326 additional authors not shown)
Abstract:
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$,…
▽ More
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$, $(20.8 \pm 1.6 \pm 2.3)\times 10^{-5}$; $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{0}\barΣ^{0})$ = $(47.8 \pm 3.4 \pm 3.9)\times 10^{-5}$, $(3.8 \pm 1.0 \pm 0.5)\times 10^{-5}$, $(4.0 \pm 1.1 \pm 0.5) \times 10^{-5}$; and $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{+}\barΣ^{-})$ = $(45.4 \pm 4.2 \pm 3.0)\times 10^{-5}$, $(5.4 \pm 1.5 \pm 0.5)\times 10^{-5}$, $(4.9 \pm 1.9 \pm 0.7)\times 10^{-5}$, where the first error is statistical and the second is systematic. Upper limits on the branching fractions for the decays of $χ_{c1,2}\rightarrowΣ^{0}\barΣ^{0}$, $Σ^{+}\barΣ^{-}$, are estimated to be $\cal{B}$$(χ_{c1}\rightarrowΣ^{0}\barΣ^{0}) < 6.2\times 10^{-5}$, $\cal{B}$$(χ_{c2}\rightarrowΣ^{0}\barΣ^{0}) < 6.5\times 10^{-5}$, $\cal{B}$$(χ_{c1}\rightarrowΣ^{+}\barΣ^{-}) < 8.7\times 10^{-5}$ and $\cal{B}$$(χ_{c2}\rightarrowΣ^{+}\barΣ^{-}) < 8.8\times 10^{-5}$ at the 90% confidence level.
△ Less
Submitted 4 March, 2013; v1 submitted 9 November, 2012;
originally announced November 2012.