-
Mapping cell cortex rheology to tissue rheology, and vice-versa
Authors:
Étienne Moisdon,
Pierre Seez,
Camille Noûs,
François Molino,
Philippe Marcq,
Cyprien Gay
Abstract:
The mechanics of biological tissues mainly proceeds from the cell cortex rheology. A direct, explicit link between cortex rheology and tissue rheology remains lacking, yet would be instrumental in understanding how modulations of cortical mechanics may impact tissue mechanical behaviour. Using an ordered geometry built on 3D hexagonal, incompressible cells, we build a mapping relating the cortical…
▽ More
The mechanics of biological tissues mainly proceeds from the cell cortex rheology. A direct, explicit link between cortex rheology and tissue rheology remains lacking, yet would be instrumental in understanding how modulations of cortical mechanics may impact tissue mechanical behaviour. Using an ordered geometry built on 3D hexagonal, incompressible cells, we build a mapping relating the cortical rheology to the monolayer tissue rheology. Our approach shows that the tissue low frequency elastic modulus is proportional to the rest tension of the cortex, as expected from the physics of liquid foams as well as of tensegrity structures. A fractional visco-contractile cortex rheology is predicted to yield a high-frequency fractional visco-elastic monolayer rheology, where such a fractional behaviour has been recently observed experimentally at each scale separately. In particular cases, the mapping may be inverted, allowing to derive from a given tissue rheology the underlying cortex rheology. Interestingly, applying the same approach to a 2D hexagonal tiling fails, which suggests that the 2D character of planar cell cortex-based models may be unsuitable to account for realistic monolayer rheologies. We provide quantitative predictions, amenable to experimental tests through standard perturbation assays of cortex constituents, and hope to foster new, challenging mechanical experiments on cell monolayers.
△ Less
Submitted 12 August, 2022; v1 submitted 22 April, 2022;
originally announced April 2022.
-
Pendulums, Drops and Rods: a physical analogy
Authors:
Benoît Roman,
Cyprien Gay,
Christophe Clanet
Abstract:
A liquid meniscus, a bending rod (also called elastica) and a simple pendulum are all described by the same non-dimensional equation. The oscillatory regime of the pendulum corresponds to buckling rods and pendant drops, and the high-velocity regime corresponds to spherical drops, puddles and multiple rod loopings. We study this analogy in a didactic way and discuss how, despite this common govern…
▽ More
A liquid meniscus, a bending rod (also called elastica) and a simple pendulum are all described by the same non-dimensional equation. The oscillatory regime of the pendulum corresponds to buckling rods and pendant drops, and the high-velocity regime corresponds to spherical drops, puddles and multiple rod loopings. We study this analogy in a didactic way and discuss how, despite this common governing equation, the three systems are not completely equivalent. We also consider the cylindrical deformations of an inextensible, flexible membrane containing a liquid, which in some sense interpolates between the meniscus and rod conformations.
△ Less
Submitted 4 June, 2020;
originally announced June 2020.
-
The Machine Learning Landscape of Top Taggers
Authors:
G. Kasieczka,
T. Plehn,
A. Butter,
K. Cranmer,
D. Debnath,
B. M. Dillon,
M. Fairbairn,
D. A. Faroughy,
W. Fedorko,
C. Gay,
L. Gouskos,
J. F. Kamenik,
P. T. Komiske,
S. Leiss,
A. Lister,
S. Macaluso,
E. M. Metodiev,
L. Moore,
B. Nachman,
K. Nordstrom,
J. Pearkes,
H. Qu,
Y. Rath,
M. Rieger,
D. Shih
, et al. (2 additional authors not shown)
Abstract:
Based on the established task of identifying boosted, hadronically decaying top quarks, we compare a wide range of modern machine learning approaches. Unlike most established methods they rely on low-level input, for instance calorimeter output. While their network architectures are vastly different, their performance is comparatively similar. In general, we find that these new approaches are extr…
▽ More
Based on the established task of identifying boosted, hadronically decaying top quarks, we compare a wide range of modern machine learning approaches. Unlike most established methods they rely on low-level input, for instance calorimeter output. While their network architectures are vastly different, their performance is comparatively similar. In general, we find that these new approaches are extremely powerful and great fun.
△ Less
Submitted 23 July, 2019; v1 submitted 26 February, 2019;
originally announced February 2019.
-
A migrating epithelial monolayer flows like a Maxwell viscoelastic liquid
Authors:
S. Tlili,
M. Durande,
C. Gay,
B. Ladoux,
F. Graner,
H. Delanoë-Ayari
Abstract:
We perform a bidimensional Stokes experiment in an active cellular material: an autonomously migrating monolayer of Madin-Darby Canine Kidney (MDCK) epithelial cells flows around a circular obstacle within a long and narrow channel, involving an interplay between cell shape changes and neighbour rearrangements. Based on image analysis of tissue flow and coarse-grained cell anisotropy, we determine…
▽ More
We perform a bidimensional Stokes experiment in an active cellular material: an autonomously migrating monolayer of Madin-Darby Canine Kidney (MDCK) epithelial cells flows around a circular obstacle within a long and narrow channel, involving an interplay between cell shape changes and neighbour rearrangements. Based on image analysis of tissue flow and coarse-grained cell anisotropy, we determine the tissue strain rate, cell deformation and rearrangement rate fields, which are spatially heterogeneous. We find that the cell deformation and rearrangement rate fields correlate strongly, which is compatible with a Maxwell viscoelastic liquid behaviour (and not with a Kelvin-Voigt viscoelastic solid behaviour). The value of the associated relaxation time is measured as $τ= 70 \pm 15$~min, is observed to be independent of obstacle size and division rate, and is increased by inhibiting myosin activity. In this experiment, the monolayer behaves as a flowing material with a Weissenberg number close to one which shows that both elastic and viscous effects can have comparable contributions in the process of collective cell migration.
△ Less
Submitted 27 April, 2020; v1 submitted 12 November, 2018;
originally announced November 2018.
-
Long Short-Term Memory (LSTM) networks with jet constituents for boosted top tagging at the LHC
Authors:
Shannon Egan,
Wojciech Fedorko,
Alison Lister,
Jannicke Pearkes,
Colin Gay
Abstract:
Multivariate techniques based on engineered features have found wide adoption in the identification of jets resulting from hadronic top decays at the Large Hadron Collider (LHC). Recent Deep Learning developments in this area include the treatment of the calorimeter activation as an image or supplying a list of jet constituent momenta to a fully connected network. This latter approach lends itself…
▽ More
Multivariate techniques based on engineered features have found wide adoption in the identification of jets resulting from hadronic top decays at the Large Hadron Collider (LHC). Recent Deep Learning developments in this area include the treatment of the calorimeter activation as an image or supplying a list of jet constituent momenta to a fully connected network. This latter approach lends itself well to the use of Recurrent Neural Networks. In this work the applicability of architectures incorporating Long Short-Term Memory (LSTM) networks is explored. Several network architectures, methods of ordering of jet constituents, and input pre-processing are studied. The best performing LSTM network achieves a background rejection of 100 for 50% signal efficiency. This represents more than a factor of two improvement over a fully connected Deep Neural Network (DNN) trained on similar types of inputs.
△ Less
Submitted 24 November, 2017;
originally announced November 2017.
-
Jet Constituents for Deep Neural Network Based Top Quark Tagging
Authors:
Jannicke Pearkes,
Wojciech Fedorko,
Alison Lister,
Colin Gay
Abstract:
Recent literature on deep neural networks for tagging of highly energetic jets resulting from top quark decays has focused on image based techniques or multivariate approaches using high-level jet substructure variables. Here, a sequential approach to this task is taken by using an ordered sequence of jet constituents as training inputs. Unlike the majority of previous approaches, this strategy do…
▽ More
Recent literature on deep neural networks for tagging of highly energetic jets resulting from top quark decays has focused on image based techniques or multivariate approaches using high-level jet substructure variables. Here, a sequential approach to this task is taken by using an ordered sequence of jet constituents as training inputs. Unlike the majority of previous approaches, this strategy does not result in a loss of information during pixelisation or the calculation of high level features. The jet classification method achieves a background rejection of 45 at a 50% efficiency operating point for reconstruction level jets with transverse momentum range of 600 to 2500 GeV and is insensitive to multiple proton-proton interactions at the levels expected throughout Run 2 of the LHC.
△ Less
Submitted 9 August, 2017; v1 submitted 7 April, 2017;
originally announced April 2017.
-
Gas pressure in bubble attached to tube circular outlet
Authors:
A Salonen,
Cyprien Gay,
A Maestro,
W Drenckhan,
Emmanuelle Rio
Abstract:
In the present Supplementary notes to our work "Arresting bubble coarsening: A two-bubble experiment to investigate grain growth in presence of surface elasticity" (accepted in EPL), we derive the expression of the gas pressure inside a bubble located above and attached to the circular outlet of a vertical tube.
In the present Supplementary notes to our work "Arresting bubble coarsening: A two-bubble experiment to investigate grain growth in presence of surface elasticity" (accepted in EPL), we derive the expression of the gas pressure inside a bubble located above and attached to the circular outlet of a vertical tube.
△ Less
Submitted 17 December, 2016;
originally announced December 2016.
-
Some fundamentals of adhesion in synthetic adhesives
Authors:
Cyprien Gay
Abstract:
Various adhesion mechanisms that have been understood in the field of synthetic adhesives are described and these are linked with situations relevant to fouling issues. The review mainly deals with mechanical aspects of adhesion phenomena, with an emphasis on the role of the elasticity of the bodies, called substrata, attached by adhesive. The consequences of thin film geometry of the adhesive mat…
▽ More
Various adhesion mechanisms that have been understood in the field of synthetic adhesives are described and these are linked with situations relevant to fouling issues. The review mainly deals with mechanical aspects of adhesion phenomena, with an emphasis on the role of the elasticity of the bodies, called substrata, attached by adhesive. The consequences of thin film geometry of the adhesive material are described, such as various heterogeneous deformations upon traction. The importance of the bonding process is discussed, as well as some examples of non-wetting surfaces. As seen from a distance, the adhesive layer is merely one interface; Some basic ideas of fracture mechanics are provided and in particular, the behavior of layered systems is discussed. Rolling sticky objects and peeled (flexible) adhesive tapes display similar mechanisms and it is shown how they differ from the normal separation of rigid bodies. Some issues directly related to fouling issues are also discussed, such as forces and torques acting on shells, the advantages of gregarious settlement behavior and concepts for fouling release and antifouling.
△ Less
Submitted 12 April, 2016;
originally announced April 2016.
-
Arresting bubble coarsening: A two-bubble experiment to investigate grain growth in presence of surface elasticity
Authors:
Anniina Salonen,
Cyprien Gay,
Armando Maestro,
Wiebke Drenckhan,
Emmanuelle Rio
Abstract:
Many two-phase materials suffer from grain-growth due to the energy cost which is associated with the interface that separates both phases. While our understanding of the driving forces and the dynamics of grain growth in different materials is well advanced by now, current research efforts address the question of how this process may be slowed down, or, ideally, arrested. We use a model system of…
▽ More
Many two-phase materials suffer from grain-growth due to the energy cost which is associated with the interface that separates both phases. While our understanding of the driving forces and the dynamics of grain growth in different materials is well advanced by now, current research efforts address the question of how this process may be slowed down, or, ideally, arrested. We use a model system of two bubbles to explore how the presence of a finite surface elasticity may interfere with the coarsening process and the final grain size distribution. Combining experiments and modelling in the analysis of the evolution of two bubbles, we show that clear relationships can be predicted between the surface tension, the surface elasticity and the initial/final size ratio of the bubbles. We rationalise these relationships by the introduction of a modified Gibbs criterion. Besides their general interest, the present results have direct implications for our understanding of foam stability.
△ Less
Submitted 9 January, 2017; v1 submitted 22 May, 2015;
originally announced May 2015.
-
Questioning the relationship between the $χ$4 susceptibility and the dynamical correlation length in a glass former
Authors:
Rémy Colin,
Ahmed Alsayed,
Cyprien Gay,
Bérengère Abou
Abstract:
Clusters of fast and slow correlated particles, identified as dynamical heterogeneities (DHs), con-stitute a central aspect of glassy dynamics. A key ingredient of the glass transition scenario is asignificant increase of the cluster size $ξ$4 as the transition is approached. In need of easy-to-computetools to measure $ξ$4 , the dynamical susceptibility $χ$4 was introduced recently, and used in va…
▽ More
Clusters of fast and slow correlated particles, identified as dynamical heterogeneities (DHs), con-stitute a central aspect of glassy dynamics. A key ingredient of the glass transition scenario is asignificant increase of the cluster size $ξ$4 as the transition is approached. In need of easy-to-computetools to measure $ξ$4 , the dynamical susceptibility $χ$4 was introduced recently, and used in various ex-perimental works to probe DHs. Here, we investigate DHs in dense microgel suspensions using imagecorrelation analysis, and compute both $χ$4 and the four-point correlation function G4 . The spatialdecrease of G4 provides a direct access to $ξ$4 , which is found to grow significantly with increasingvolume fraction. However, this increase is not captured by $χ$4 . We show that the assumptions thatvalidate the connection between $χ$4 and $ξ$4 are not fulfilled in our experiments.
△ Less
Submitted 10 September, 2015; v1 submitted 28 December, 2014;
originally announced December 2014.
-
Colloquium: Mechanical formalisms for tissue dynamics
Authors:
Sham Tlili,
Cyprien Gay,
Francois Graner,
Philippe Marcq,
François Molino,
Pierre Saramito
Abstract:
The understanding of morphogenesis in living organisms has been renewed by tremendous progressin experimental techniques that provide access to cell-scale, quantitative information both on theshapes of cells within tissues and on the genes being expressed. This information suggests that ourunderstanding of the respective contributions of gene expression and mechanics, and of their crucialentanglem…
▽ More
The understanding of morphogenesis in living organisms has been renewed by tremendous progressin experimental techniques that provide access to cell-scale, quantitative information both on theshapes of cells within tissues and on the genes being expressed. This information suggests that ourunderstanding of the respective contributions of gene expression and mechanics, and of their crucialentanglement, will soon leap forward. Biomechanics increasingly benefits from models, which assistthe design and interpretation of experiments, point out the main ingredients and assumptions, andultimately lead to predictions. The newly accessible local information thus calls for a reflectionon how to select suitable classes of mechanical models. We review both mechanical ingredientssuggested by the current knowledge of tissue behaviour, and modelling methods that can helpgenerate a rheological diagram or a constitutive equation. We distinguish cell scale ("intra-cell")and tissue scale ("inter-cell") contributions. We recall the mathematical framework developpedfor continuum materials and explain how to transform a constitutive equation into a set of partialdifferential equations amenable to numerical resolution. We show that when plastic behaviour isrelevant, the dissipation function formalism appears appropriate to generate constitutive equations;its variational nature facilitates numerical implementation, and we discuss adaptations needed in thecase of large deformations. The present article gathers theoretical methods that can readily enhancethe significance of the data to be extracted from recent or future high throughput biomechanicalexperiments.
△ Less
Submitted 29 September, 2015; v1 submitted 28 September, 2013;
originally announced September 2013.
-
Non-Gaussian statistics of critical sets in 2 and 3D: Peaks, voids, saddles, genus and skeleton
Authors:
Christophe Gay,
Christophe Pichon,
Dmitri Pogosyan
Abstract:
The formalism to compute the geometrical and topological one-point statistics of mildly non-Gaussian 2D and 3D cosmological fields is developed. Leveraging the isotropy of the target statistics, the Gram-Charlier expansion is reformulated with rotation invariant variables. This formulation allows us to track the geometrical statistics of the cosmic field to all orders. It then allows us to connect…
▽ More
The formalism to compute the geometrical and topological one-point statistics of mildly non-Gaussian 2D and 3D cosmological fields is developed. Leveraging the isotropy of the target statistics, the Gram-Charlier expansion is reformulated with rotation invariant variables. This formulation allows us to track the geometrical statistics of the cosmic field to all orders. It then allows us to connect the one point statistics of the critical sets to the growth factor through perturbation theory, which predicts the redshift evolution of higher order cumulants. In particular, the cosmic non-linear evolution of the skeleton's length, together with the statistics of extrema and Euler characteristic are investigated in turn. In 2D, the corresponding differential densities are analytic as a function of the excursion set threshold and the shape parameter. In 3D, the Euler characteristics and the field isosurface area are also analytic to all orders in the expansion. Numerical integrations are performed and simple fits are provided whenever closed form expressions are not available. These statistics are compared to estimates from N-body simulations and are shown to match well the cosmic evolution up to root mean square of the density field of ~0.2. In 3D, gravitational perturbation theory is implemented to predict the cosmic evolution of all the relevant Gram-Charlier coefficients for universes with scale invariant matter distribution. The one point statistics of critical sets could be used to constrain primordial non-Gaussianities and the dark energy equation of state on upcoming cosmic surveys; this is illustrated on idealized experiments.
△ Less
Submitted 2 October, 2011;
originally announced October 2011.
-
Criterion for purely elastic Taylor-Couette instability in the flows of shear-banding fluids
Authors:
M. A. Fardin,
T. J. Ober,
C. Gay,
G. Grégoire,
G. H. McKinley,
S. Lerouge
Abstract:
In the past twenty years, shear-banding flows have been probed by various techniques, such as rheometry, velocimetry and flow birefringence. In micellar solutions, many of the data collected exhibit unexplained spatio-temporal fluctuations. Recently, it has been suggested that those fluctuations originate from a purely elastic instability of the flow. In cylindrical Couette geometry, the instabili…
▽ More
In the past twenty years, shear-banding flows have been probed by various techniques, such as rheometry, velocimetry and flow birefringence. In micellar solutions, many of the data collected exhibit unexplained spatio-temporal fluctuations. Recently, it has been suggested that those fluctuations originate from a purely elastic instability of the flow. In cylindrical Couette geometry, the instability is reminiscent of the Taylor-like instability observed in viscoelastic polymer solutions. In this letter, we describe how the criterion for purely elastic Taylor-Couette instability should be adapted to shear-banding flows. We derive three categories of shear-banding flows with curved streamlines, depending on their stability.
△ Less
Submitted 12 August, 2011;
originally announced August 2011.
-
Non Gaussian extrema counts for CMB maps
Authors:
Dmitri Pogosyan,
Christophe Pichon,
Christophe Gay
Abstract:
In the context of the geometrical analysis of weakly non Gaussian CMB maps, the 2D differential extrema counts as functions of the excursion set threshold is derived from the full moments expansion of the joint probability distribution of an isotropic random field, its gradient and invariants of the Hessian. Analytic expressions for these counts are given to second order in the non Gaussian correc…
▽ More
In the context of the geometrical analysis of weakly non Gaussian CMB maps, the 2D differential extrema counts as functions of the excursion set threshold is derived from the full moments expansion of the joint probability distribution of an isotropic random field, its gradient and invariants of the Hessian. Analytic expressions for these counts are given to second order in the non Gaussian correction, while a Monte Carlo method to compute them to arbitrary order is presented. Matching count statistics to these estimators is illustrated on fiducial non-Gaussian "Planck" data.
△ Less
Submitted 10 July, 2011;
originally announced July 2011.
-
Potential "ways of thinking" about the shear-banding phenomenon
Authors:
M. A. Fardin,
T. J. Ober,
C. Gay,
G. Grégoire,
G. H. McKInley,
S. Lerouge
Abstract:
Shear-banding is a curious but ubiquitous phenomenon occurring in soft matter. The phenomenological similarities between the shear-banding transition and phase transitions has pushed some researchers to adopt a 'thermodynamical' approach, in opposition to the more classical 'mechanical' approach to fluid flows. In this heuristic review, we describe why the apparent dichotomy between those approach…
▽ More
Shear-banding is a curious but ubiquitous phenomenon occurring in soft matter. The phenomenological similarities between the shear-banding transition and phase transitions has pushed some researchers to adopt a 'thermodynamical' approach, in opposition to the more classical 'mechanical' approach to fluid flows. In this heuristic review, we describe why the apparent dichotomy between those approaches has slowly faded away over the years. To support our discussion, we give an overview of different interpretations of a single equation, the diffusive Johnson-Segalman (dJS) equation, in the context of shear-banding. We restrict ourselves to dJS, but we show that the equation can be written in various equivalent forms usually associated with opposite approaches. We first review briefly the origin of the dJS model and its initial rheological interpretation in the context of shear-banding. Then we describe the analogy between dJS and reaction-diffusion equations. In the case of anisotropic diffusion, we show how the dJS governing equations for steady shear flow are analogous to the equations of the dynamics of a particle in a quartic potential. Going beyond the existing literature, we then draw on the Lagrangian formalism to describe how the boundary conditions can have a key impact on the banding state. Finally, we reinterpret the dJS equation again and we show that a rigorous effective free energy can be constructed, in the spirit of early thermodynamic interpretations or in terms of more recent approaches exploiting the language of irreversible thermodynamics.
△ Less
Submitted 6 July, 2011;
originally announced July 2011.
-
Rovibrationally resolved photodissociation of HeH+
Authors:
S. Miyake,
C. D. Gay,
P. C. Stancil
Abstract:
Accurate photodissociation cross sections have been obtained for the A-X electronic transition of HeH+ using ab initio potential curves and dipole transition moments. Partial cross sections have been evaluated for all rotational transitions from the vibrational levels v"=0-11 and over the entire accessible wavelength range 100-1129 Angstrom. Assuming a Boltzmann distribution of the rovibrational l…
▽ More
Accurate photodissociation cross sections have been obtained for the A-X electronic transition of HeH+ using ab initio potential curves and dipole transition moments. Partial cross sections have been evaluated for all rotational transitions from the vibrational levels v"=0-11 and over the entire accessible wavelength range 100-1129 Angstrom. Assuming a Boltzmann distribution of the rovibrational levels of the X state, photodissociation cross sections are presented for temperatures between 500 and 12,000 K. A similar set of calculations was performed for the pure rovibrational photodissociation in the X-X electronic ground state, but covering photon wavelengths into the far infrared. Applications of the cross sections to the destruction of HeH+in the early Universe and in UV-irradiated environments such as primordial halos and protoplanetary disks are briefly discussed.
△ Less
Submitted 29 April, 2011;
originally announced April 2011.
-
Wrinkling hierarchy in constrained thin sheets from suspended graphene to curtains
Authors:
Hugues Vandeparre,
Miguel Pineirua,
Fabian Brau,
Benoit Roman,
Jose Bico,
Cyprien Gay,
Wenzhong Bao,
Chun Ning Lau,
Pedro M. Reis,
Pascal Damman
Abstract:
We show that thin sheets under boundary confinement spontaneously generate a universal self-similar hierarchy of wrinkles. From simple geometry arguments and energy scalings, we develop a formalism based on wrinklons, the transition zone in the merging of two wrinkles, as building-blocks of the global pattern. Contrary to the case of crumple paper where elastic energy is focused, this transition i…
▽ More
We show that thin sheets under boundary confinement spontaneously generate a universal self-similar hierarchy of wrinkles. From simple geometry arguments and energy scalings, we develop a formalism based on wrinklons, the transition zone in the merging of two wrinkles, as building-blocks of the global pattern. Contrary to the case of crumple paper where elastic energy is focused, this transition is described as smooth in agreement with a recent numerical work. This formalism is validated from hundreds of nm for graphene sheets to meters for ordinary curtains, which shows the universality of our description. We finally describe the effect of an external tension to the distribution of the wrinkles.
△ Less
Submitted 3 April, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Non-linear oscillatory rheological properties of a generic continuum foam model: comparison with experiments and shear-banding predictions
Authors:
Sylvain Bénito,
François Molino,
Charles-Henri Bruneau,
Thierry Colin,
Cyprien Gay
Abstract:
The occurence of shear bands in a complex fluid is generally understood as resulting from a structural evolution of the material under shear, which leads (from a theoretical perspective) to a non-monotonic stationnary flow curve related to the coexistence of different states of the material under shear. In this paper we present a scenario for shear-banding in a particular class of complex fluids,…
▽ More
The occurence of shear bands in a complex fluid is generally understood as resulting from a structural evolution of the material under shear, which leads (from a theoretical perspective) to a non-monotonic stationnary flow curve related to the coexistence of different states of the material under shear. In this paper we present a scenario for shear-banding in a particular class of complex fluids, namely foams and concentrated emulsions, which differs from other scenarii in two important ways. First, the appearance of shear bands is shown to be possible both without any intrinsic physical evolution of the material (e.g. via a parameter coupled to the flow such as concentration or entanglements) and without any finite critical shear rate below which the flow does not remain stationary and homogeneous. Secondly, the appearance of shear bands depends on the initial conditions, i.e., the preparation of the material. In other words, it is history dependent. This behaviour relies on the tensorial character of the underlying model (2D or 3D) and is triggered by an initially inhomogeneous strain distribution in the material. The shear rate displays a discontinuity at the band boundary, whose amplitude is history dependent and thus depends on the sample preparation.
△ Less
Submitted 21 June, 2012; v1 submitted 2 November, 2010;
originally announced November 2010.
-
Note and calculations concerning elastic dilatancy in 2D glass-glass liquid foams
Authors:
François Molino,
Pierre Rognon,
Cyprien Gay
Abstract:
When deformed, liquid foams tend to raise their liquid contents like immersed granular materials, a phenomenon called dilatancy. We have aready described a geometrical interpretation of elastic dilatancy in 3D foams and in very dry foams squeezed between two solid plates (2D GG foams). Here, we complement this work in the regime of less dry 2D GG foams. In particular, we highlight the relatively s…
▽ More
When deformed, liquid foams tend to raise their liquid contents like immersed granular materials, a phenomenon called dilatancy. We have aready described a geometrical interpretation of elastic dilatancy in 3D foams and in very dry foams squeezed between two solid plates (2D GG foams). Here, we complement this work in the regime of less dry 2D GG foams. In particular, we highlight the relatively strong dilatancy effects expected in the regime where we have predicted rapid Plateau border variations.
△ Less
Submitted 30 October, 2010;
originally announced November 2010.
-
Extensive collection of femtoliter pad secretion droplets in beetle Leptinotarsa decemlineata allows nanoliter microrheology
Authors:
Bérengère Abou,
Cyprien Gay,
Bastien Laurent,
Olivier Cardoso,
Dagmar Voigt,
Henrik Peisker,
Stanislav Gorb
Abstract:
Pads of beetles are covered with long, deformable setae, each ending in a micrometric terminal plate coated with secretory fluid. It was recently shown that the layer of the pad secretion covering the terminal plates is responsible for the generation of strong attractive forces. However, less is known about the fluid itself because it is produced in extremely small quantity. We here present a fi…
▽ More
Pads of beetles are covered with long, deformable setae, each ending in a micrometric terminal plate coated with secretory fluid. It was recently shown that the layer of the pad secretion covering the terminal plates is responsible for the generation of strong attractive forces. However, less is known about the fluid itself because it is produced in extremely small quantity. We here present a first experimental investigation of the rheological properties of the pad secretion in the Colorado potato beetle {\it Leptinotarsa decemlineata}. Because the secretion is produced in an extremely small amount at the level of the terminal plate, we first develop a procedure based on capillary effects to collect the secretion. We then manage to incorporate micrometric beads, initially in the form of a dry powder, and record their thermal motion to determine the mechanical properties of the surrounding medium. We achieve such a quantitative measurement within the collected volume, much smaller than the $1 {\rm μ}$l sample volume usually required for this technique. Surprisingly, the beetle secretion was found to behave as a purely viscous liquid, of high viscosity. This suggests that no specific complex fluid behaviour is needed during beetle locomotion. We build a scenario for the contact formation between the spatula at the setal tip and a substrate, during the insect walk. We show that the attachment dynamics of the insect pad computed from the high measured viscosity is in good agreement with observed insect pace. We finally discuss the consequences of the secretion viscosity on the insect adhesion.
△ Less
Submitted 10 February, 2010;
originally announced February 2010.
-
The Skeleton: Connecting Large Scale Structures to Galaxy Formation
Authors:
Christophe Pichon,
Christophe Gay,
Dmitry Pogosyan,
Simon Prunet,
Thierry Sousbie,
Stephane Colombi,
Adrianne Slyz,
Julien Devriendt
Abstract:
We report on two quantitative, morphological estimators of the filamentary structure of the Cosmic Web, the so-called global and local skeletons. The first, based on a global study of the matter density gradient flow, allows us to study the connectivity between a density peak and its surroundings, with direct relevance to the anisotropic accretion via cold flows on galactic halos.
From the sec…
▽ More
We report on two quantitative, morphological estimators of the filamentary structure of the Cosmic Web, the so-called global and local skeletons. The first, based on a global study of the matter density gradient flow, allows us to study the connectivity between a density peak and its surroundings, with direct relevance to the anisotropic accretion via cold flows on galactic halos.
From the second, based on a local constraint equation involving the derivatives of the field, we can derive predictions for powerful statistics, such as the differential length and the relative saddle to extrema counts of the Cosmic web as a function of density threshold (with application to percolation of structures and connectivity), as well as a theoretical framework to study their cosmic evolution through the onset of gravity-induced non-linearities.
△ Less
Submitted 19 November, 2009;
originally announced November 2009.
-
Internal relaxation time in immersed particulate materials
Authors:
P. Rognon,
I. Einav,
C. Gay
Abstract:
We study the dynamics of the solid to liquid transition for a model material made of elastic particles immersed in a viscous fluid. The interaction between particle surfaces includes their viscous lubrication, a sharp repulsion when they get closer than a tuned steric length and their elastic deflection induced by those two forces. We use Soft Dynamics to simulate the dynamics of this material w…
▽ More
We study the dynamics of the solid to liquid transition for a model material made of elastic particles immersed in a viscous fluid. The interaction between particle surfaces includes their viscous lubrication, a sharp repulsion when they get closer than a tuned steric length and their elastic deflection induced by those two forces. We use Soft Dynamics to simulate the dynamics of this material when it experiences a step increase in the shear stress and a constant normal stress. We observe a long creep phase before a substantial flow eventually establishes. We find that the typical creep time relies on an internal relaxation process, namely the separation of two particles driven by the applied stress and resisted by the viscous friction. This mechanism should be relevant for granular pastes, living cells, emulsions and wet foams.
△ Less
Submitted 12 November, 2009;
originally announced November 2009.
-
On the filamentary environment of galaxies
Authors:
C. Gay,
C. Pichon,
D. Le Borgne,
R. Teyssier,
T. Sousbie,
J. Devriendt
Abstract:
The correlation between the large-scale distribution of galaxies and their spectroscopic properties at z=1.5 is investigated using the Horizon MareNostrum cosmological run.
We have extracted a large sample of 10^5 galaxies from this large hydrodynamical simulation featuring standard galaxy formation physics. Spectral synthesis is applied to these single stellar populations to generate spectra…
▽ More
The correlation between the large-scale distribution of galaxies and their spectroscopic properties at z=1.5 is investigated using the Horizon MareNostrum cosmological run.
We have extracted a large sample of 10^5 galaxies from this large hydrodynamical simulation featuring standard galaxy formation physics. Spectral synthesis is applied to these single stellar populations to generate spectra and colours for all galaxies. We use the skeleton as a tracer of the cosmic web and study how our galaxy catalogue depends on the distance to the skeleton. We show that galaxies closer to the skeleton tend to be redder, but that the effect is mostly due to the proximity of large haloes at the nodes of the skeleton, rather than the filaments themselves.
This effects translate into a bimodality in the colour distribution of our sample. The origin of this bimodality is investigated and seems to follow from the ram pressure stripping of satellite galaxies within the more massive clusters of the simulation.
The virtual catalogues (spectroscopical properties of the MareNostrum galaxies at various redshifts) are available online at http://www.iap.fr/users/pichon/MareNostrum/catalogues
△ Less
Submitted 25 January, 2010; v1 submitted 9 October, 2009;
originally announced October 2009.
-
A tentative geometrical description of static dilatancy in liquid foams: ordered 2D and 3D foams
Authors:
Pierre Rognon,
François Molino,
Cyprien Gay
Abstract:
Liquid foams have been observed to behave like immersed granular materials in at least one respect: deformation tends to raise their liquid contents, a phenomenon called dilatancy. We present a geometrical interpretation thereof in foams squeezed between two solid plates (2D GG foams), which contain pseudo Plateau borders along the plates, and in 3D foams. While experimental observations evidenc…
▽ More
Liquid foams have been observed to behave like immersed granular materials in at least one respect: deformation tends to raise their liquid contents, a phenomenon called dilatancy. We present a geometrical interpretation thereof in foams squeezed between two solid plates (2D GG foams), which contain pseudo Plateau borders along the plates, and in 3D foams. While experimental observations evidenced the effect of a continuous deformation rate (dynamic dilatancy), the present argument applies primarily to elastic deformation (static dilatancy). We show that the negative dilatancy predicted by Weaire and Hutzler (Phil. Mag. 83 (2003) 2747) at very low liquid fractions is specific to ideal 2D foams and should not be observed in the dry limit of real 2D foams.
△ Less
Submitted 26 September, 2009;
originally announced September 2009.
-
The invariant joint distribution of a stationary random field and its derivatives: Euler characteristic and critical point counts in 2 and 3D
Authors:
Dmitri Pogosyan,
Christophe Gay,
Christophe Pichon
Abstract:
The full moments expansion of the joint probability distribution of an isotropic random field, its gradient and invariants of the Hessian is presented in 2 and 3D. It allows for explicit expression for the Euler characteristic in ND and computation of extrema counts as functions of the excursion set threshold and the spectral parameter, as illustrated on model examples.
The full moments expansion of the joint probability distribution of an isotropic random field, its gradient and invariants of the Hessian is presented in 2 and 3D. It allows for explicit expression for the Euler characteristic in ND and computation of extrema counts as functions of the excursion set threshold and the spectral parameter, as illustrated on model examples.
△ Less
Submitted 30 March, 2010; v1 submitted 9 July, 2009;
originally announced July 2009.
-
Plateau border bulimia transition: discontinuities expected in three simple experiments on 2D liquid foams
Authors:
Pierre Rognon,
François Molino,
Cyprien Gay
Abstract:
We describe the geometry of foams squeezed between two solid plates (2D GG foams) in two main asymptotic regimes: fully dry floor tiles and dry pancakes. We predict an abrupt transition between both regimes, with a substantial change in the Plateau border radius. This should be observable in different types of experiments on such 2D GG foams: when foam is being progressively dried or wetted, whe…
▽ More
We describe the geometry of foams squeezed between two solid plates (2D GG foams) in two main asymptotic regimes: fully dry floor tiles and dry pancakes. We predict an abrupt transition between both regimes, with a substantial change in the Plateau border radius. This should be observable in different types of experiments on such 2D GG foams: when foam is being progressively dried or wetted, when it is being squeezed further or stretched, when it coarsens through film breakage or Oswald ripening.
△ Less
Submitted 13 February, 2009;
originally announced February 2009.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
Soft Dynamics simulation: 2. Elastic spheres undergoing a T1 process in a viscous fluid
Authors:
Pierre Rognon,
Cyprien Gay
Abstract:
Robust empirical constitutive laws for granular materials in air or in a viscous fluid have been expressed in terms of timescales based on the dynamics of a single particle. However, some behaviours such as viscosity bifurcation or shear localization, observed also in foams, emulsions, and block copolymer cubic phases, seem to involve other micro-timescales which may be related to the dynamics o…
▽ More
Robust empirical constitutive laws for granular materials in air or in a viscous fluid have been expressed in terms of timescales based on the dynamics of a single particle. However, some behaviours such as viscosity bifurcation or shear localization, observed also in foams, emulsions, and block copolymer cubic phases, seem to involve other micro-timescales which may be related to the dynamics of local particle reorganizations. In the present work, we consider a T1 process as an example of a rearrangement. Using the Soft dynamics simulation method introduced in the first paper of this series, we describe theoretically and numerically the motion of four elastic spheres in a viscous fluid. Hydrodynamic interactions are described at the level of lubrication (Poiseuille squeezing and Couette shear flow) and the elastic deflection of the particle surface is modeled as Hertzian. The duration of the simulated T1 process can vary substantially as a consequence of minute changes in the initial separations, consistently with predictions. For the first time, a collective behaviour is thus found to depend on another parameter than the typical volume fraction in particles.
△ Less
Submitted 16 July, 2009; v1 submitted 1 January, 2009;
originally announced January 2009.
-
The Local Theory of the Cosmic Skeleton
Authors:
D. Pogosyan,
C. Pichon,
C. Gay,
S. Prunet,
J. F. Cardoso,
T. Sousbie,
S. Colombi
Abstract:
The local theory of the critical lines of 2D and 3D Gaussian fields that underline the cosmic structures is presented. In the context of cosmological matter distribution the subset of critical lines of the 3D density field serves to delineate the skeleton of the observed filamentary structure at large scales. A stiff approximation used to quantitatively describe the filamentary skeleton shows th…
▽ More
The local theory of the critical lines of 2D and 3D Gaussian fields that underline the cosmic structures is presented. In the context of cosmological matter distribution the subset of critical lines of the 3D density field serves to delineate the skeleton of the observed filamentary structure at large scales. A stiff approximation used to quantitatively describe the filamentary skeleton shows that the flux of the skeleton lines is related to the average Gaussian curvature of the 1D (2D) sections of the field, much in the same way as the density of the peaks. The distribution of the length of the critical lines with threshold is analyzed in detail, while the extended descriptors of the skeleton - its curvature and its singular points, are introduced and briefly described. Theoretical predictions are compared to measurements of the skeleton in realizations of Gaussian random fields in 2D and 3D. It is found that the stiff approximation predicts accurately the shape of the differential length, allows for analytical insight, and explicit closed form solutions. Finally, it provides a simple classification of the singular points of the critical lines: i) critical points; ii) bifurcation points; iii) slopping plateaux.
△ Less
Submitted 10 November, 2008;
originally announced November 2008.
-
Dense granular flows: interpolating between grain inertia and fluid viscosity based constitutive laws
Authors:
Pierre Rognon,
Cyprien Gay
Abstract:
A scalar constitutive law was recently obtained for dense granular flows from a two-grain argument, both in the inertial regime (grain inertia) and in the viscous regime. As the resulting law is not exactly the same in both regimes, we here provide an expression for the crossover between both regimes.
A scalar constitutive law was recently obtained for dense granular flows from a two-grain argument, both in the inertial regime (grain inertia) and in the viscous regime. As the resulting law is not exactly the same in both regimes, we here provide an expression for the crossover between both regimes.
△ Less
Submitted 16 September, 2008;
originally announced September 2008.
-
Dense granular flows: two-particle argument accounts for friction-like constitutive law with threshold
Authors:
Pierre Rognon,
Cyprien Gay
Abstract:
A scalar constitutive law is obtained for dense granular flows, both in the inertial regime where the grain inertia dominates, and in the viscous regime. Considering a pair of grains rather than a single grain, the classical arguments yield a constitutive law that exhibits a flow threshold expressed as a finite effective friction at flow onset. The value of the threshold is not predicted. The re…
▽ More
A scalar constitutive law is obtained for dense granular flows, both in the inertial regime where the grain inertia dominates, and in the viscous regime. Considering a pair of grains rather than a single grain, the classical arguments yield a constitutive law that exhibits a flow threshold expressed as a finite effective friction at flow onset. The value of the threshold is not predicted. The resulting law seems to be compatible with existing data, provided the saturation at high velocity (collisional regime) is added empirically. The law is not exactly the same in both regimes, which seems to indicate that there is no "universal" law.
△ Less
Submitted 16 September, 2008;
originally announced September 2008.
-
Soft Dynamics simulation: normal approach of deformable particles in a viscous fluid
Authors:
Pierre Rognon,
Cyprien Gay
Abstract:
Discrete simulation methods are efficient tools to investigate the complex behaviors of complex fluids made of either dry granular materials or dilute suspensions. By contrast, materials made of soft and/or concentrated units (emulsions, foams, vesicles, dense suspensions) can exhibit both significant elastic particle deflections (Hertz-like response) and strong viscous forces (squeezed liquid).…
▽ More
Discrete simulation methods are efficient tools to investigate the complex behaviors of complex fluids made of either dry granular materials or dilute suspensions. By contrast, materials made of soft and/or concentrated units (emulsions, foams, vesicles, dense suspensions) can exhibit both significant elastic particle deflections (Hertz-like response) and strong viscous forces (squeezed liquid). We point out that the gap between two particles is then not determined solely by the positions of their centers, but rather exhibits its own dynamics. We provide a new discrete numerical method, named Soft Dynamics, to simulate the combined dynamics of particles and contacts. As an illustration, we present the results for the approach of two particles. We recover the scaling behaviors expected in three limits: the Stokes limit for very large gaps, the Poiseuille-lubricated limit for small gaps and even smaller surface deflections, and the Hertz limit for significant surface deflections. Larger scale simulations with this new method are a promising tool for investigating the collective behaviors of many complex materials.
△ Less
Submitted 11 March, 2008;
originally announced March 2008.
-
An elasto-visco-plastic model for immortal foams or emulsions
Authors:
Sylvain Bénito,
Charles-Henri Bruneau,
Thierry Colin,
Cyprien Gay,
François Molino
Abstract:
A variety of complex fluids consist in soft, round objects (foams, emulsions, assemblies of copolymer micelles or of multilamellar vesicles -- also known as onions). Their dense packing induces a slight deviation from their prefered circular or spherical shape. As a frustrated assembly of interacting bodies, such a material evolves from one conformation to another through a succession of discret…
▽ More
A variety of complex fluids consist in soft, round objects (foams, emulsions, assemblies of copolymer micelles or of multilamellar vesicles -- also known as onions). Their dense packing induces a slight deviation from their prefered circular or spherical shape. As a frustrated assembly of interacting bodies, such a material evolves from one conformation to another through a succession of discrete, topological events driven by finite external forces. As a result, the material exhibits a finite yield threshold. The individual objects usually evolve spontaneously (colloidal diffusion, object coalescence, molecular diffusion), and the material properties under low or vanishing stress may alter with time, a phenomenon known as aging. We neglect such effects to address the simpler behaviour of (uncommon) immortal fluids: we construct a minimal, fully tensorial, rheological model, equivalent to the (scalar) Bingham model. Importantly, the model consistently describes the ability of such soft materials to deform substantially in the elastic regime (be it compressible or not) before they undergo (incompressible) plastic creep -- or viscous flow under even higher stresses.
△ Less
Submitted 2 November, 2007;
originally announced November 2007.
-
Slippery or sticky ! Control of wrinkling patterns by selective adhesion
Authors:
Hugues Vandeparre,
Julien Léopoldès,
Christophe Poulard,
Sylvain Desprez,
Gwennaelle Derue,
Cyprien Gay,
Pascal Damman
Abstract:
Wrinkling patterns at the metallized surface of thin polymer films are shown to be sensitive to the sticky or slippery character of the polymer/substrate interface (titanium coating, polystyrene film and coated silicon substrate). Selective prefered wrinkle orientation and amplitude are achieved. Existing theoretical models are expanded to specific boundary conditions (adhesive vs slippery) and…
▽ More
Wrinkling patterns at the metallized surface of thin polymer films are shown to be sensitive to the sticky or slippery character of the polymer/substrate interface (titanium coating, polystyrene film and coated silicon substrate). Selective prefered wrinkle orientation and amplitude are achieved. Existing theoretical models are expanded to specific boundary conditions (adhesive vs slippery) and rationalize these observations.
△ Less
Submitted 28 June, 2007;
originally announced June 2007.
-
Understanding crack versus cavitation in pressure-sensitive adhesives: the role of kinetics
Authors:
Jérémie Teisseire,
F. Nallet,
P. Fabre,
Cyprien Gay
Abstract:
We perform traction experiments on viscous liquids highly confined between parallel plates, a geometry known as the probe-tack test in the adhesion community. Direct observation during the experiment coupled to force measurement shows the existence of several mechanisms for releasing the stress. Bubble nucleation and instantaneous growth had been observed in a previous work. Upon increasing furt…
▽ More
We perform traction experiments on viscous liquids highly confined between parallel plates, a geometry known as the probe-tack test in the adhesion community. Direct observation during the experiment coupled to force measurement shows the existence of several mechanisms for releasing the stress. Bubble nucleation and instantaneous growth had been observed in a previous work. Upon increasing further the traction velocity or the viscosity, the bubble growth is progressively delayed. At high velocities, cracks at the interface between the plate and the liquid appear before the bubbles have grown to their full size. Bubbles and cracks are thus observed concomitantly. At even higher velocities, cracks develop fully so early that the bubbles are not even visible. We present a theoretical model that describes these regimes, using a Maxwell fluid as a model for the actual fluid, a highly viscous silicon oil. We present the resulting phase diagramme for the different force peak regimes. The predictions are compatible with the data. Our results show that in addition to cavitation, interfacial cracks are encountered in a probe-tack traction test with viscoelastic, \emph{liquid} materials and not solely with viscoelastic solids like adhesives.
△ Less
Submitted 18 September, 2006;
originally announced September 2006.
-
Search for First-Generation Scalar Leptoquarks in $\bm{p \bar{p}}$ collisions at $\sqrt{s}$=1.96 TeV
Authors:
The CDF Collaboration,
D. Acosta,
J. Adelman,
T. Affolder,
T. Akimoto,
M. G. Albrow,
D. Ambrose,
S. Amerio,
D. Amidei,
A. Anastassov,
K. Anikeev,
A. Annovi,
J. Antos,
M. Aoki,
G. Apollinari,
T. Arisawa,
J-F. Arguin,
A. Artikov,
W. Ashmanskas,
A. Attal,
F. Azfar,
P. Azzi-Bacchetta,
N. Bacchetta,
H. Bachacou,
W. Badgett
, et al. (605 additional authors not shown)
Abstract:
We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L.…
▽ More
We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L. upper limits on the $LQ$ production cross section. %as a function of $β$, where $β$ is the branching fraction for $LQ \to eq$. The results are combined with those obtained from a separately reported CDF search in the topology arising from $LQ\bar{LQ} \to νq νq$ and 95% C.L. lower limits on the LQ mass as a function of $β= BR(LQ \to eq) $ are derived. The limits are 236, 205 and 145 GeV/c$^2$ for $β$ = 1, $β$ = 0.5 and $β$ = 0.1, respectively.
△ Less
Submitted 29 June, 2005;
originally announced June 2005.
-
Comparison of Three-jet Events in Proton-Antiproton Collisions at Center-of-mass Energy 1.8 TeV to Predictions from a Next-to-leading Order QCD Calculation
Authors:
D. Acosta,
T. Affolder,
M. G. Albrow,
D. Ambrose,
D. Amidei,
K. Anikeev,
J. Antos,
G. Apollinari,
T. Arisawa,
A. Artikov,
W. Ashmanskas,
F. Azfar,
P. Azzi-Bacchetta,
N. Bacchetta,
H. Bachacou,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
S. Baroiant,
M. Barone,
G. Bauer,
F. Bedeschi,
S. Behari,
S. Belforte
, et al. (388 additional authors not shown)
Abstract:
The properties of three-jet events with total transverse energy greater than 320 GeV and individual jet energy greater than 20 GeV have been analyzed and compared to absolute predictions from a next-to-leading order (NLO) perturbative QCD calculation. These data, of integrated luminosity 86 pb^-1, were recorded by the CDF Experiment for proton-antiproton collisions at sqrt{s}=1.8 TeV. This study…
▽ More
The properties of three-jet events with total transverse energy greater than 320 GeV and individual jet energy greater than 20 GeV have been analyzed and compared to absolute predictions from a next-to-leading order (NLO) perturbative QCD calculation. These data, of integrated luminosity 86 pb^-1, were recorded by the CDF Experiment for proton-antiproton collisions at sqrt{s}=1.8 TeV. This study tests a model of higher order QCD processes that result in gluon emission and can be used to estimate the magnitude of the contribution of processes higher than NLO. The total cross section is measured to be 466 +/- 3(stat.)^{+207}_{-70}(syst.) pb. The differential cross section is furthermore measured for all kinematically accessible regions of the Dalitz plane, including those for which the theoretical prediction is unreliable. While the measured cross section is consistent with the theoretical prediction in magnitude, the two differ somewhat in shape in the Dalitz plane.
△ Less
Submitted 6 October, 2004;
originally announced October 2004.
-
Magnetotransport and Superconductivity of Alpha-Uranium
Authors:
G. M. Schmiedeshoff,
D. Dulguerova,
J. Quan,
S. Touton,
C. H. Mielke,
A. D. Christianson,
A. H. Lacerda,
E. Palm,
S. T. Hannahs,
T. Murphy,
E. C. Gay,
C. C. McPheeters,
D. J. Thoma,
W. L. Hults,
J. C. Cooley,
A. M. Kelly,
R. J. Hanrahan, Jr.,
J. L. Smith
Abstract:
We have measured the electrical resistivity, magnetoresistance, and Hall effect on several new single crystal samples and one polycrystalline sample of alpha-uranium. The residual resistivity ratios of these samples vary from 13 to 315. Matthiessen's law appears to hold above the onset of the charge density wave phase transitions that begin near 43 K, but not below this temperature. Sharp featur…
▽ More
We have measured the electrical resistivity, magnetoresistance, and Hall effect on several new single crystal samples and one polycrystalline sample of alpha-uranium. The residual resistivity ratios of these samples vary from 13 to 315. Matthiessen's law appears to hold above the onset of the charge density wave phase transitions that begin near 43 K, but not below this temperature. Sharp features at all three charge density wave transitions are observed and the effects of high magnetic fields on them are presented and discussed. The magnetoresistance is anisotropic, reaches 1000% at 2 K and 18 T, and does not exhibit Kohler scaling. The Hall coefficient is positive, independent of magnetic field, and slightly temperature dependent above about 40 K in agreement with earlier studies. Below 40 K the Hall coefficient changes sign as the temperature falls, varies with field, and becomes much more strongly negative at the lowest temperatures than has been reported. Some of our results suggest that a spin density wave may coexist with the charge density wave states. Superconductivity is observed in two of our samples, we argue that it is intrinsic to alpha-uranium and suggest that it is consistent with a two-band model. Several parameters characterizing the transport and superconductivity of alpha-uranium are estimated.
△ Less
Submitted 14 February, 2004;
originally announced February 2004.
-
Asymmetries in the Production of Lambda0 in 250 GeV/c pi+-, K+- and p -- Nucleon Interactions
Authors:
G. A. Alves,
S. Amato,
J. C. Anjos,
J. A. Appel,
J. Astorga,
T. Bernard,
S. B. Bracker,
L. M. Cremaldi,
W. D. Dagenhart,
C. L. Darling,
D. Errede,
H. C. Fenker,
C. Gay,
D. R. Green,
R. Jedicke,
P. E. Karchin,
S. Kwan,
L. H. Lueking,
J. R. T. de Mello Neto,
J. Metheny,
R. H. Milburn,
J. M. de Miranda,
H. da Motta,
A. Napier,
M. S. Nicola
, et al. (13 additional authors not shown)
Abstract:
Using data from Fermilab fixed-target experiment E769, we have measured particle-antiparticle production asymmetries for Lambda0 hyperons in 250 GeV/c pi+-, K+- and p -- nucleon interactions. The asymmetries are measured as functions of Feynman-x (x_F) and p_t^2 over the ranges -0.12<=x_F<=0.12 and 0<=p_t^2<=3 (GeV/c)^2 (for positive beam) and -0.12<=x_F<=0.4 and 0<=p_t^2<=10 (GeV/c)^2 (for nega…
▽ More
Using data from Fermilab fixed-target experiment E769, we have measured particle-antiparticle production asymmetries for Lambda0 hyperons in 250 GeV/c pi+-, K+- and p -- nucleon interactions. The asymmetries are measured as functions of Feynman-x (x_F) and p_t^2 over the ranges -0.12<=x_F<=0.12 and 0<=p_t^2<=3 (GeV/c)^2 (for positive beam) and -0.12<=x_F<=0.4 and 0<=p_t^2<=10 (GeV/c)^2 (for negative beam). We find substantial asymmetries, even at x_F around zero. We also observe leading-particle-type asymmetries. These latter effects are qualitatively as expected from valence-quark content of the target and variety of projectiles studied.
△ Less
Submitted 19 March, 2003;
originally announced March 2003.
-
Cavitation-induced force transition in confined viscous liquids under traction
Authors:
S. Poivet,
F. Nallet,
C. Gay,
P. Fabre
Abstract:
We perform traction experiments on simple liquids highly confined between parallel plates. At small separation rates, we observe a simple response corresponding to a convergent Poiseuille flow. Dramatic changes in the force response occur at high separation rates, with the appearance of a force plateau followed by an abrupt drop. By direct observation in the course of the experiment, we show tha…
▽ More
We perform traction experiments on simple liquids highly confined between parallel plates. At small separation rates, we observe a simple response corresponding to a convergent Poiseuille flow. Dramatic changes in the force response occur at high separation rates, with the appearance of a force plateau followed by an abrupt drop. By direct observation in the course of the experiment, we show that cavitation accounts for these features which are reminiscent of the utmost complex behavior of adhesive films under traction. Surprisingly enough, this is observed here in purely viscous fluids.
△ Less
Submitted 2 October, 2002;
originally announced October 2002.
-
Stress Propagation in Two Dimensional Frictional Granular Matter
Authors:
Rava da Silveira,
Guillaume Vidalenc,
Cyprien Gay
Abstract:
The stress profile and reorientation of grains, in response to a point force applied to a preloaded two dimensional granular system, are calculated in the context of a continuum theory that incorporates the texture of the packing. When high friction prevents slip at the inter-grain contacts, an anisotropic packing propagates stress along two peaks which amalgamate into a single peak as the packi…
▽ More
The stress profile and reorientation of grains, in response to a point force applied to a preloaded two dimensional granular system, are calculated in the context of a continuum theory that incorporates the texture of the packing. When high friction prevents slip at the inter-grain contacts, an anisotropic packing propagates stress along two peaks which amalgamate into a single peak as the packing is disordered into a less anisotropic structure; this single peak may be wider or narrower than in the isotropic case, depending on the preparation of the packing. At lower frictions, an effective treatment of slipping contacts yields sharpened peaks, and ultimately a singular limit in which stress propagates along straight rays. Recent experiments, as well as aspects of hyperbolic models, are discussed in light of these results.
△ Less
Submitted 11 August, 2002;
originally announced August 2002.
-
Anisotropic elastic theory of preloaded granular media
Authors:
Cyprien Gay,
Rava da Silveira
Abstract:
A macroscopic elastic description of stresses in static, preloaded granular media is derived systematically from the microscopic elasticity of individual inter-grain contacts. The assumed preloaded state and friction at contacts ensure that the network of inter-grain contacts is not altered by small perturbations. The texture of this network, set by the preparation of the system, is encoded in s…
▽ More
A macroscopic elastic description of stresses in static, preloaded granular media is derived systematically from the microscopic elasticity of individual inter-grain contacts. The assumed preloaded state and friction at contacts ensure that the network of inter-grain contacts is not altered by small perturbations. The texture of this network, set by the preparation of the system, is encoded in second and fourth order fabric tensors. A small perturbation generates both normal and tangential inter-grain forces, the latter causing grains to reorient. This reorientation response and the incremental stress are expressed in terms of the macroscopic strain.
△ Less
Submitted 1 September, 2004; v1 submitted 7 August, 2002;
originally announced August 2002.
-
B Mixing
Authors:
Colin Gay
Abstract:
The neutral $B$ mesons, $B^0$ and $B_s$, can oscillate between their particle and antiparticle states owing to flavor-changing weak interactions. In recent years, techniques to detect these oscillations as a function of the meson's decay time have been developed. In this article the physics of flavor oscillations is reviewed and theoretical predictions are summarized. The many observations that…
▽ More
The neutral $B$ mesons, $B^0$ and $B_s$, can oscillate between their particle and antiparticle states owing to flavor-changing weak interactions. In recent years, techniques to detect these oscillations as a function of the meson's decay time have been developed. In this article the physics of flavor oscillations is reviewed and theoretical predictions are summarized. The many observations that demonstrate the time-dependence of $B^0-\B0bar$ oscillations are presented along with a combined measurement of its frequency, $δm_d$. The attempts to measure the $B_s$ oscillation frequency, both directly and indirectly, are then summarized. Finally, values for the CKM elements $|V_{td}|$ and $|V_{ts}/V_{td}|$ are extracted.
△ Less
Submitted 13 March, 2001;
originally announced March 2001.
-
Inwardly curved polymer brushes : Concave is not like Convex
Authors:
Manoel Manghi,
Miguel Aubouy,
Cyprien Gay,
Christian Ligoure
Abstract:
Inwardly curved polymer brushes are present in cylindrical and spherical micelles or in membranes tubes and vesicles decorated with anchored polymers, and influence their stability. We consider such polymer brushes in good solvent and show that previous works, based on a self-similar concentric structure of the brush, are physically inconsistent. We use scaling laws to derive very simply the lea…
▽ More
Inwardly curved polymer brushes are present in cylindrical and spherical micelles or in membranes tubes and vesicles decorated with anchored polymers, and influence their stability. We consider such polymer brushes in good solvent and show that previous works, based on a self-similar concentric structure of the brush, are physically inconsistent. We use scaling laws to derive very simply the leading term of the free energy in the high curvature limit, where the osmotic pressure is the relevant physical ingredient. We also derive the complete conformation at all curvatures using a self-consistent field approach. The free energy is computed therefrom using a local scaling description.
△ Less
Submitted 25 June, 2001; v1 submitted 5 February, 2001;
originally announced February 2001.
-
Comb-like polymers inside nanoscale pores
Authors:
Cyprien Gay,
Elie Raphael
Abstract:
A new method of polymer characterization, based on permeation studies using nanoscale pores, was recently proposed by Brochard and de Gennes. In the present paper, we study how this method, initially developped for star polymers can be extended to comb-like polymers.
A new method of polymer characterization, based on permeation studies using nanoscale pores, was recently proposed by Brochard and de Gennes. In the present paper, we study how this method, initially developped for star polymers can be extended to comb-like polymers.
△ Less
Submitted 14 December, 2000;
originally announced December 2000.
-
Hysteretic behavior of a polymer molecule immersed in an incompatible melt
Authors:
Cyprien Gay,
Elie Raphael
Abstract:
The radius of gyration of a polymer chain immersed in a low molecular weight solvent is known to vary monotonically with the solvent quality. Here, we consider the behavior of a chain immersed in a high molecular weight solvent (polymer melt). Unsurprisingly, we find that, as the incompatibility between the chain and the polymer melt is increased, the two limiting conformations of the chain are…
▽ More
The radius of gyration of a polymer chain immersed in a low molecular weight solvent is known to vary monotonically with the solvent quality. Here, we consider the behavior of a chain immersed in a high molecular weight solvent (polymer melt). Unsurprisingly, we find that, as the incompatibility between the chain and the polymer melt is increased, the two limiting conformations of the chain are the ideal random coil (R = aN^1/2) and the dense globule (R = aN^1/3). We show, however, that between these two limits the radius of gyration of the chain presents a hysteretic behavior .
△ Less
Submitted 7 December, 2000;
originally announced December 2000.
