Showing 1–40 of 40 results for author: Gregor, I

ADENIUM -- A demonstrator for a next-generation beam telescope at DESY

Authors: Yi Liu, Changqing Feng, Ingrid-Maria Gregor, Adrian Herkert, Lennart Huth, Marcel Stanitzki, Yao Teng, Chenfei Yang

Abstract: High-resolution beam telescopes for charged particle tracking are one of the most important and equally demanding infrastructure items at test beam facilities. The main purpose of beam telescopes is to provide precise reference track information of beam particles to measure the performance of a device under test (DUT). In this report the development of the ADENIUM beam telescope (ALPIDE sensor bas… ▽ More High-resolution beam telescopes for charged particle tracking are one of the most important and equally demanding infrastructure items at test beam facilities. The main purpose of beam telescopes is to provide precise reference track information of beam particles to measure the performance of a device under test (DUT). In this report the development of the ADENIUM beam telescope (ALPIDE sensor based DESY Next test beam Instrument) as a demonstrator and prototype for a next-generation beam telescope is presented. The ADENIUM beam telescope features up to six pixelated reference planes framed by plastic scintillators for triggering. ADENIUM is capable of replacing the currently used EUDET-type beam telescopes without impacting existing DUT implementations due to the integration of the telescope DAQ into EUDAQ2. In this report the concept and design of the ADENIUM telescope as well as its performance are discussed. The telescope's pointing resolution is determined in different configurations. For an optimal setup at an momentum of 5.6 GeV with an ALPIDE as DUT, a resolution better than 3 um has been extracted. No rate limitations have been observed at the DESY II test beam. △ Less

Submitted 1 June, 2023; v1 submitted 14 January, 2023; originally announced January 2023.

Comments: 11 pages, 8 figures

Report number: PUBDB-2022-07438

The Tangerine project: Development of high-resolution 65 nm silicon MAPS

Authors: Håkan Wennlöf, Ankur Chauhan, Manuel Del Rio Viera, Doris Eckstein, Finn Feindt, Ingrid-Maria Gregor, Karsten Hansen, Lennart Huth, Larissa Mendes, Budi Mulyanto, Daniil Rastorguev, Christian Reckleben, Sara Ruiz Daza, Paul Schütze, Adriana Simancas, Simon Spannagel, Marcel Stanitzki, Anastasiia Velyka, Gianpiero Vignola

Abstract: The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of developing a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced… ▽ More The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of developing a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced power consumption and material budget compared to other processes. The process is envisioned to be used in for example the next ALICE inner tracker upgrade, and in experiments at the electron-ion collider. The initial goal of the three-year Tangerine project is to develop and test a sensor in a 65 nm CMOS imaging process that can be used in test beam telescopes at DESY, providing excellent spatial resolution and high time resolution, and thus demonstrating the capabilities of the process. The project covers all aspects of sensor R&D, from electronics and sensor design using simulations, to prototype test chip characterisation in labs and at test beams. The sensor design simulations are performed by using a powerful combination of detailed electric field simulations using technology computer-aided design and high-statistics Monte Carlo simulations using the Allpix Squared framework. A first prototype test chip in the process has been designed and produced, and successfully operated and tested both in labs and at test beams. △ Less

Submitted 11 June, 2022; originally announced June 2022.

Comments: 5 pages, 5 figures. Proceedings of VCI 2022: The 16th Vienna Conference on Instrumentation, submitted to Nucl. Instrum. Methods Phys. Res. A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1039C (2022) 167025

Characterization of Passive CMOS Strip Sensors

Authors: Leena Diehl, Marta Baselga, Ingrid Maria Gregor, Marc Hauser, Tomasz Hemperek, Jan Cedric Hönig, Karl Jakobs, Sven Mägdefessel, Ulrich Parzefall, Arturo Rodriguez, Surabhi Sharma, Dennis Sperlich, Liv Wiik-Fuchs, Tianyang Wang

Abstract: Recent advances in CMOS imaging sensor technology , e.g. in CMOS pixel sensors, have proven that the CMOS process is radiation tolerant enough to cope with certain radiation levels required for tracking layers in hadron collider experiments. With the ever-increasing area covered by silicon tracking detectors cost effective alternatives to the current silicon sensors and more integrated designs are… ▽ More Recent advances in CMOS imaging sensor technology , e.g. in CMOS pixel sensors, have proven that the CMOS process is radiation tolerant enough to cope with certain radiation levels required for tracking layers in hadron collider experiments. With the ever-increasing area covered by silicon tracking detectors cost effective alternatives to the current silicon sensors and more integrated designs are desirable. This article describes results obtained from laboratory measurements of silicon strip sensors produced in a passive p-CMOS process. Electrical characterization and charge collection measurements with a 90Sr source and a laser with infrared wavelength showed no effect of the stitching process on the performance of the sensor. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Comments: 6 pages, 16 figures

EUTelescope: A modular reconstruction framework for beam telescope data

Authors: Tobias Bisanz, Hendrik Jansen, Jan-Hendrik Arling, Antonio Bulgheroni, Jan Dreyling-Eschweiler, Thomas Eichhorn, Ingrid-Maria Gregor, Phlillip Hamnett, Claus Kleinwort, Alexander Morton, Hanno Perrey, Michaela Queitsch-Maitland, Edoardo Rossi, Simon Spannagel

Abstract: EUTelescope is a modular, comprehensive software framework for the reconstruction of particle trajectories recorded with beam telescopes. Its modularity allows for a flexible usage of processors each fulfilling separate tasks of the reconstruction chain such as clustering, alignment and track fitting. %The reconstruction chain is directed via XML steering files. The framework facilitates the usage… ▽ More EUTelescope is a modular, comprehensive software framework for the reconstruction of particle trajectories recorded with beam telescopes. Its modularity allows for a flexible usage of processors each fulfilling separate tasks of the reconstruction chain such as clustering, alignment and track fitting. %The reconstruction chain is directed via XML steering files. The framework facilitates the usage of any position sensitive device for both the beam telescope sensors as well as the device under test and supports a wide range of geometric arrangements of the sensors. In this work, the functionality of the EUTelescope framework as released in v2.2 and its underlying dependencies are discussed. Various use cases with emphasis on the General Broken Lines advanced track fitting methods give examples of the work flow and capabilities of the framework. △ Less

Submitted 20 November, 2020; originally announced November 2020.

Journal ref: Journal of Instrumentation, Volume 15, September 2020, P09020-P09020

The ABC130 barrel module prototyping programme for the ATLAS strip tracker

Authors: Luise Poley, Craig Sawyer, Sagar Addepalli, Anthony Affolder, Bruno Allongue, Phil Allport, Eric Anderssen, Francis Anghinolfi, Jean-François Arguin, Jan-Hendrik Arling, Olivier Arnaez, Nedaa Alexandra Asbah, Joe Ashby, Eleni Myrto Asimakopoulou, Naim Bora Atlay, Ludwig Bartsch, Matthew J. Basso, James Beacham, Scott L. Beaupré, Graham Beck, Carl Beichert, Laura Bergsten, Jose Bernabeu, Prajita Bhattarai, Ingo Bloch , et al. (224 additional authors not shown)

Abstract: For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000… ▽ More For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: 82 pages, 66 figures

Journal ref: published 3 September 2020, Journal of Instrumentation, Volume 15, September 2020

EUDAQ $-$ A Data Acquisition Software Framework for Common Beam Telescopes

Authors: P. Ahlburg, S. Arfaoui, J. -H. Arling, H. Augustin, D. Barney, M. Benoit, T. Bisanz, E. Corrin, D. Cussans, D. Dannheim, J. Dreyling-Eschweiler, T. Eichhorn, A. Fiergolski, I. -M. Gregor, J. Grosse-Knetter, D. Haas, L. Huth, A. Irles, H. Jansen, J. Janssen, M. Keil, J. S. Keller, M. Kiehn, H. J. Kim, J. Kroll , et al. (32 additional authors not shown)

Abstract: EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed… ▽ More EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed with reliability and ease-of-use in mind. It enables flexible integration of different independent devices under test via their specific data acquisition systems into a top-level framework. EUDAQ controls all components globally, handles the data flow centrally and synchronises and records the data streams. Over the past decade, EUDAQ has been deployed as part of a wide range of successful test beam campaigns and detector development applications. △ Less

Submitted 18 November, 2019; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: 32 pages, 11 figures

EUDAQ2 -- A Flexible Data Acquisition Software Framework for Common Test Beams

Authors: Y. Liu, M. S. Amjad, P. Baesso, D. Cussans, J. Dreyling-Eschweiler, R. Ete, I. Gregor, L. Huth, A. Irles, H. Jansen, K. Krueger, J. Kvasnicka, R. Peschke, E. Rossi, A. Rummler, F. Sefkow, M. Stanitzki, M. Wing, M. Wu

Abstract: The data acquisition software framework, EUDAQ, was originally developed to read out data from the EUDET-type pixel telescopes. This was successfully used in many test beam campaigns in which an external position and time reference were required. The software has recently undergone a significant upgrade, EUDAQ2, which is a generic, modern and modular system for use by many different detector types… ▽ More The data acquisition software framework, EUDAQ, was originally developed to read out data from the EUDET-type pixel telescopes. This was successfully used in many test beam campaigns in which an external position and time reference were required. The software has recently undergone a significant upgrade, EUDAQ2, which is a generic, modern and modular system for use by many different detector types, ranging from tracking detectors to calorimeters. EUDAQ2 is suited as an overarching software that links individual detector readout systems and simplifies the integration of multiple detectors. The framework itself supports several triggering and event building modes. This flexibility makes test beams with multiple detectors significantly easier and more efficient, as EUDAQ2 can adapt to the characteristics of each detector prototype during testing. The system has been thoroughly tested during multiple test beams involving different detector prototypes. EUDAQ2 has now been released and is freely available under an open-source license. △ Less

Submitted 4 September, 2019; v1 submitted 23 July, 2019; originally announced July 2019.

Comments: 17 pages, 6 figures

The DESY II Test Beam Facility

Authors: Ralf Diener, Jan Dreyling-Eschweiler, Heiko Ehrlichmann, Ingrid-Maria Gregor, Ulrich Kötz, Uwe Krämer, Norbert Meyners, Natalia Potylitsina-Kube, Anne Schütz, Paul Schütze, Marcel Stanitzki

Abstract: DESY Hamburg operates a test beam facility with three independent beam lines at the DESY II synchrotron. It is world-wide one of very few facilities providing test beams in the GeV range. To this end, it offers electron/positron beams with user-selectable momenta from 1-6 GeV/c. The available infrastructure for the users is unique, including a high field solenoidal magnet and permanently installed… ▽ More DESY Hamburg operates a test beam facility with three independent beam lines at the DESY II synchrotron. It is world-wide one of very few facilities providing test beams in the GeV range. To this end, it offers electron/positron beams with user-selectable momenta from 1-6 GeV/c. The available infrastructure for the users is unique, including a high field solenoidal magnet and permanently installed high-precision pixel beam telescopes. This publication gives a detailed description of the facility, the available infrastructure, and the simulated and measured performance. △ Less

Submitted 26 October, 2018; v1 submitted 24 July, 2018; originally announced July 2018.

Comments: 63 pages, 67 figures

Report number: DESY 18-111

Production and Integration of the ATLAS Insertable B-Layer

Authors: B. Abbott, J. Albert, F. Alberti, M. Alex, G. Alimonti, S. Alkire, P. Allport, S. Altenheiner, L. Ancu, E. Anderssen, A. Andreani, A. Andreazza, B. Axen, J. Arguin, M. Backhaus, G. Balbi, J. Ballansat, M. Barbero, G. Barbier, A. Bassalat, R. Bates, P. Baudin, M. Battaglia, T. Beau, R. Beccherle , et al. (352 additional authors not shown)

Abstract: During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i… ▽ More During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector. △ Less

Submitted 6 June, 2018; v1 submitted 2 March, 2018; originally announced March 2018.

Comments: 90 pages in total. Author list: ATLAS IBL Collaboration, starting page 2. 69 figures, 20 tables. Published in Journal of Instrumentation. All figures available at: https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PLOTS/PIX-2018-001

Journal ref: Journal of Instrumentation JINST 13 T05008 (2018)

Summary and Conclusions of the First DESY Test Beam User Workshop

Authors: Jan-Hendrik Arling, M. Sohail Amjad, Laura Bandiera, Ties Behnke, Dominik Dannheim, Ralf Diener, Jan Dreyling-Eschweiler, Heiko Ehrlichmann, Andreas Gerbershagen, Ingrid-Maria Gregor, Avetik Hayrapetyan, Hendrik Jansen, Jochen Kaminski, Jiri Kroll, Paolo Martinengo, Norbert Meyners, Christian Müntz, Luise Poley, Benjamin Schwenker, Marcel Stanitzki

Abstract: On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALICE, ATLAS, CMS, LHCb) to FAIR (CBM, PANDA), DUNE, Belle-II, future linear colliders (ILC, CLIC) and generic detector R&D presented their experiences with the DESY II Test Beam Facility, their concrete plans for the upcomi… ▽ More On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALICE, ATLAS, CMS, LHCb) to FAIR (CBM, PANDA), DUNE, Belle-II, future linear colliders (ILC, CLIC) and generic detector R&D presented their experiences with the DESY II Test Beam Facility, their concrete plans for the upcoming years and a first estimate of their needs for beam time in the long-term future beyond 2025. A special focus was also on additional improvements to the facility beyond its current capabilities. △ Less

Submitted 15 May, 2018; v1 submitted 1 February, 2018; originally announced February 2018.

Report number: DESY 18-019

Thermal and hydrodynamic studies for micro-channel cooling for large area silicon sensors in high energy physics experiments

Authors: Nils Flaschel, Dario Ariza, Sergio Diez, Marta Gerboles, Ingrid-Maria Gregor, Xavier Jorda, Roser Mas, David Quirion, Kerstin Tackmann, Miguel Ullan

Abstract: Micro-channel cooling initially aiming at small-sized high-power integrated circuits is being transferred to the field of high energy physics. Today`s prospects of micro-fabricating silicon opens a door to a more direct cooling of detector modules. The challenge in high energy physics is to save material in the detector construction and to cool large areas. In this paper, we are investigating micr… ▽ More Micro-channel cooling initially aiming at small-sized high-power integrated circuits is being transferred to the field of high energy physics. Today`s prospects of micro-fabricating silicon opens a door to a more direct cooling of detector modules. The challenge in high energy physics is to save material in the detector construction and to cool large areas. In this paper, we are investigating micro-channel cooling as a candidate for a future cooling system for silicon detectors in a generic research and development approach. The work presented in this paper includes the production and the hydrodynamic and thermal testing of a micro-channel equipped prototype optimized to achieve a homogeneous flow distribution. Furthermore, the device was simulated using finite element methods. △ Less

Submitted 9 May, 2017; v1 submitted 16 November, 2016; originally announced November 2016.

Comments: 10 pages, submitted to NIMA (accepted)

Measurement of the cross-section ratio sigma_{psi(2S)}/sigma_{J/psi(1S)} in deep inelastic exclusive ep scattering at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, S. Antonelli, V. Aushev, Y. Aushev, O. Behnke, U. Behrens, A. Bertolin, I. Bloch, E. G. Boos, K. Borras, I. Brock, N. H. Brook, R. Brugnera, A. Bruni, P. J. Bussey, A. Caldwell, M. Capua, C. D. Catterall, J. Chwastowski, J. Ciborowski, R. Ciesielski , et al. (122 additional authors not shown)

Abstract: The exclusive deep inelastic electroproduction of $ψぷさい(2S)$ and $J/ψぷさい(1S)$ at an $ep$ centre-of-mass energy of 317 GeV has been studied with the ZEUS detector at HERA in the kinematic range $2 < Q^2 < 80$ GeV$^2$, $30 < W < 210$ GeV and $|t| < 1$ GeV$^2$, where $Q^2$ is the photon virtuality, $W$ is the photon-proton centre-of-mass energy and $t$ is the squared four-momentum transfer at the proton ve… ▽ More The exclusive deep inelastic electroproduction of $ψぷさい(2S)$ and $J/ψぷさい(1S)$ at an $ep$ centre-of-mass energy of 317 GeV has been studied with the ZEUS detector at HERA in the kinematic range $2 < Q^2 < 80$ GeV$^2$, $30 < W < 210$ GeV and $|t| < 1$ GeV$^2$, where $Q^2$ is the photon virtuality, $W$ is the photon-proton centre-of-mass energy and $t$ is the squared four-momentum transfer at the proton vertex. The data for $2 < Q^2 < 5$ GeV$^2$ were taken in the HERA I running period and correspond to an integrated luminosity of 114 pb$^{-1}$. The data for $5 < Q^2 < 80$ GeV$^2$ are from both HERA I and HERA II periods and correspond to an integrated luminosity of 468 pb$^{-1}$. The decay modes analysed were $μみゅー^+μみゅー^-$ and $J/ψぷさい(1S) πぱい^+πぱい^-$ for the $ψぷさい(2S)$ and $μみゅー^+μみゅー^-$ for the $J/ψぷさい(1S)$. The cross-section ratio $σしぐま_{ψぷさい(2S)}/σしぐま_{J/ψぷさい(1S)}$ has been measured as a function of $Q^2, W$ and $t$. The results are compared to predictions of QCD-inspired models of exclusive vector-meson production. △ Less

Submitted 29 June, 2016; v1 submitted 28 June, 2016; originally announced June 2016.

Comments: 24 pages, 8 figures, This is a duplicate of arXiv:1601.03699 that was submitted in error

Report number: DESY-16-008

Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC

Authors: C. Barth, C. A. Betancourt, I. Bloch, F. Bögelspacher, W. de Boer, M. Daniels, A. Dierlamm, R. Eber, G. Eckerlin, D. Eckstein, T. Eichhorn, J. Erfle, L. Feld, E. Garutti, I. -M. Gregor, M. Guthoff, F. Hartmann, M. Hauser, U. Husemann, K. Jakobs, A. Junkes, W. Karpinski, K. Klein, S. Kuehn, H. Lacker , et al. (16 additional authors not shown)

Abstract: While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an env… ▽ More While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative "Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC" (PETTL), which was supported by the Helmholtz Alliance "Physics at the Terascale" during the years 2013 and 2014. The aim of the project was to share experience and to work together on key areas of mutual interest during the R&D phase of these upgrades. The project concentrated on five areas, namely exchange of experience, radiation hardness of silicon sensors, low mass system design, automated precision assembly procedures, and irradiations. This report summarizes the main achievements. △ Less

Submitted 28 April, 2016; originally announced April 2016.

Performance of the EUDET-type beam telescopes

Authors: H. Jansen, S. Spannagel, J. Behr, A. Bulgheroni, G. Claus, E. Corrin, D. G. Cussans, J. Dreyling-Eschweiler, D. Eckstein, T. Eichhorn, M. Goffe, I. M. Gregor, D. Haas, C. Muhl, H. Perrey, R. Peschke, P. Roloff, I. Rubinskiy, M. Winter

Abstract: Test beam measurements at the test beam facilities of DESY have been conducted to characterise the performance of the EUDET-type beam telescopes originally developed within the EUDET project. The beam telescopes are equipped with six sensor planes using MIMOSA26 monolithic active pixel devices. A programmable Trigger Logic Unit provides trigger logic and time stamp information on particle passage.… ▽ More Test beam measurements at the test beam facilities of DESY have been conducted to characterise the performance of the EUDET-type beam telescopes originally developed within the EUDET project. The beam telescopes are equipped with six sensor planes using MIMOSA26 monolithic active pixel devices. A programmable Trigger Logic Unit provides trigger logic and time stamp information on particle passage. Both data acquisition framework and offline reconstruction software packages are available. User devices are easily integrable into the data acquisition framework via predefined interfaces. The biased residual distribution is studied as a function of the beam energy, plane spacing and sensor threshold. Its standard deviation at the two centre pixel planes using all six planes for tracking in a 6\,GeV electron/positron-beam is measured to be $(2.88\,\pm\,0.08)\,\upmu\meter$.Iterative track fits using the formalism of General Broken Lines are performed to estimate the intrinsic resolution of the individual pixel planes. The mean intrinsic resolution over the six sensors used is found to be $(3.24\,\pm\,0.09)\,\upmu\meter$.With a 5\,GeV electron/positron beam, the track resolution halfway between the two inner pixel planes using an equidistant plane spacing of 20\,mm is estimated to $(1.83\,\pm\,0.03)\,\upmu\meter$ assuming the measured intrinsic resolution. Towards lower beam energies the track resolution deteriorates due to increasing multiple scattering. Threshold studies show an optimal working point of the MIMOSA26 sensors at a sensor threshold of between five and six times their RMS noise. Measurements at different plane spacings are used to calibrate the amount of multiple scattering in the material traversed and allow for corrections to the predicted angular scattering for electron beams. △ Less

Submitted 10 May, 2016; v1 submitted 31 March, 2016; originally announced March 2016.

Report number: DESY 16-055

Characterisation of silicon microstrip detectors for the ATLAS Phase-II Upgrade with a micro-focused X-ray beam

Authors: Luise Poley, Andrew Blue, Richard Bates, Ingo Bloch, Sergio Diez, Javier Fernandez-Tejero, Celeste Fleta, Bruce Gallop, Ashley Greenall, Ingrid-Maria Gregor, Kazuhiko Hara, Yoichi Ikegami, Carlos Lacasta, Kristin Lohwasser, Dzmitry Maneuski, Sebastian Nagorski, Ian Pape, Peter W. Phillips, Dennis Sperlich, Kawal Sawhney, Urmila Soldevila, Miguel Ullan, Yoshinobu Unno, Matt Warren

Abstract: The planned HL-LHC (High Luminosity LHC) in 2025 is being designed to maximise the physics potential through a sizable increase in the luminosity up to 6*10^34 cm^-2 s^-1. A consequence of this increased luminosity is the expected radiation damage at 3000 fb^-1 after ten years of operation, requiring the tracking detectors to withstand fluences to over 1*10^16 1 MeV n_eq/cm^2 . In order to cope wi… ▽ More The planned HL-LHC (High Luminosity LHC) in 2025 is being designed to maximise the physics potential through a sizable increase in the luminosity up to 6*10^34 cm^-2 s^-1. A consequence of this increased luminosity is the expected radiation damage at 3000 fb^-1 after ten years of operation, requiring the tracking detectors to withstand fluences to over 1*10^16 1 MeV n_eq/cm^2 . In order to cope with the consequent increased readout rates, a complete re-design of the current ATLAS Inner Detector (ID) is being developed as the Inner Tracker (ITk). Two proposed detectors for the ATLAS strip tracker region of the ITk were characterized at the Diamond Light Source with a 3 um FWHM 15 keV micro focused X-ray beam. The devices under test were a 320 Um thick silicon stereo (Barrel) ATLAS12 strip mini sensor wire bonded to a 130 nm CMOS binary readout chip (ABC130) and a 320 Um thick full size radial (end-cap) strip sensor - utilizing bi-metal readout layers - wire bonded to 250 nm CMOS binary readout chips (ABCN-25). A resolution better than the inter strip pitch of the 74.5 um strips was achieved for both detectors. The effect of the p-stop diffusion layers between strips was investigated in detail for the wire bond pad regions. Inter strip charge collection measurements indicate that the effective width of the strip on the silicon sensors is determined by p-stop regions between the strips rather than the strip pitch. △ Less

Submitted 1 July, 2016; v1 submitted 15 March, 2016; originally announced March 2016.

Comments: 12 pages, to be published to Journal of Instrumentation

Measurement of the cross-section ratio sigma_{psi(2S)}/sigma_{J/psi(1S)} in deep inelastic exclusive ep scattering at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, S. Antonelli, V. Aushev, Y. Aushev, O. Behnke, U. Behrens, A. Bertolin, I. Bloch, E. G. Boos, K. Borras, I. Brock, N. H. Brook, R. Brugnera, A. Bruni, P. J. Bussey, A. Caldwell, M. Capua, C. D. Catterall, J. Chwastowski, J. Ciborowski, R. Ciesielski , et al. (122 additional authors not shown)

Abstract: The exclusive deep inelastic electroproduction of $ψぷさい(2S)$ and $J/ψぷさい(1S)$ at an $ep$ centre-of-mass energy of 317 GeV has been studied with the ZEUS detector at HERA in the kinematic range $2 < Q^2 < 80$ GeV$^2$, $30 < W < 210$ GeV and $|t| < 1$ GeV$^2$, where $Q^2$ is the photon virtuality, $W$ is the photon-proton centre-of-mass energy and $t$ is the squared four-momentum transfer at the proton ve… ▽ More The exclusive deep inelastic electroproduction of $ψぷさい(2S)$ and $J/ψぷさい(1S)$ at an $ep$ centre-of-mass energy of 317 GeV has been studied with the ZEUS detector at HERA in the kinematic range $2 < Q^2 < 80$ GeV$^2$, $30 < W < 210$ GeV and $|t| < 1$ GeV$^2$, where $Q^2$ is the photon virtuality, $W$ is the photon-proton centre-of-mass energy and $t$ is the squared four-momentum transfer at the proton vertex. The data for $2 < Q^2 < 5$ GeV$^2$ were taken in the HERA I running period and correspond to an integrated luminosity of 114 pb$^{-1}$. The data for $5 < Q^2 < 80$ GeV$^2$ are from both HERA I and HERA II periods and correspond to an integrated luminosity of 468 pb$^{-1}$. The decay modes analysed were $μみゅー^+μみゅー^-$ and $J/ψぷさい(1S) \,πぱい^+πぱい^-$ for the $ψぷさい(2S)$ and $μみゅー^+μみゅー^-$ for the $J/ψぷさい(1S)$. The cross-section ratio $σしぐま_{ψぷさい(2S)}/σしぐま_{J/ψぷさい(1S)}$ has been measured as a function of $Q^2, W$ and $t$. The results are compared to predictions of QCD-inspired models of exclusive vector-meson production. △ Less

Submitted 14 January, 2016; originally announced January 2016.

Comments: 24 pages, 8 figures

Report number: DESY-16-008

Alternative glues for the production of ATLAS silicon strip modules for the Phase-II upgrade of the ATLAS Inner Detector

Authors: Luise Poley, Ingo Bloch, Sam Edwards, Conrad Friedrich, Ingrid-Maria Gregor, Tim Jones, Heiko Lacker, Simon Pyatt, Laura Rehnisch, Dennis Sperlich, John Wilson

Abstract: The Phase-II upgrade of the ATLAS detector for the High Luminosity Large Hadron Collider (HL-LHC) includes the replacement of the current Inner Detector with an all-silicon tracker consisting of pixel and strip detectors. The current Phase-II detector layout requires the construction of 20,000 strip detector modules consisting of sensor, circuit boards and readout chips, which are connected mechan… ▽ More The Phase-II upgrade of the ATLAS detector for the High Luminosity Large Hadron Collider (HL-LHC) includes the replacement of the current Inner Detector with an all-silicon tracker consisting of pixel and strip detectors. The current Phase-II detector layout requires the construction of 20,000 strip detector modules consisting of sensor, circuit boards and readout chips, which are connected mechanically using adhesives. The adhesive between readout chips and circuit board is a silver epoxy glue as was used in the current ATLAS SemiConductor Tracker (SCT). This glue has several disadvantages, which motivated the search for an alternative. This paper presents a study concerning the use of six ultra-violet (UV) cure glues and a glue pad for use in the assembly of silicon strip detector modules for the ATLAS upgrade. Trials were carried out to determine the ease of use, the thermal conduction and shear strength, thermal cycling, radiation hardness, corrosion resistance and shear strength tests. These investigations led to the exclusion of three UV cure glues as well as the glue pad. Three UV cure glues were found to be possible better alternatives. Results from electrical tests of first prototype modules constructed using these glues are presented. △ Less

Submitted 26 April, 2016; v1 submitted 24 August, 2015; originally announced August 2015.

Comments: 23 pages, to be published in Journal of Instrumentation

Production of exclusive dijets in diffractive deep inelastic scattering at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, S. Antonelli, V. Aushev, Y. Aushev, O. Behnke, U. Behrens, A. Bertolin, I. Bloch, E. G. Boos, K. Borras, I. Brock, N. H. Brook, R. Brugnera, A. Bruni, P. J. Bussey, A. Caldwell, M. Capua, C. D. Catterall, J. Chwastowski, J. Ciborowski, R. Ciesielski , et al. (122 additional authors not shown)

Abstract: Production of exclusive dijets in diffractive deep inelastic $e^\pm p$ scattering has been measured with the ZEUS detector at HERA using an integrated luminosity of 372 pb$^{-1}$. The measurement was performed for $γがんま^*-p$ centre-of-mass energies in the range $90 < W < 250$ GeV and for photon virtualities $Q^2 > 25$ GeV$^2$. Energy and transverse-energy flows around the jet axis are presented. The… ▽ More Production of exclusive dijets in diffractive deep inelastic $e^\pm p$ scattering has been measured with the ZEUS detector at HERA using an integrated luminosity of 372 pb$^{-1}$. The measurement was performed for $γがんま^*-p$ centre-of-mass energies in the range $90 < W < 250$ GeV and for photon virtualities $Q^2 > 25$ GeV$^2$. Energy and transverse-energy flows around the jet axis are presented. The cross section is presented as a function of $βべーた$ and $φふぁい$, where $βべーた=x/x_{\rm I\!P}$, $x$ is the Bjorken variable and $x_{\rm I\!P}$ is the proton fractional longitudinal momentum loss. The angle $φふぁい$ is defined by the $γがんま^*-$dijet plane and the $γがんま^*-e^\pm$ plane in the rest frame of the diffractive final state. The $φふぁい$ cross section is measured in bins of $βべーた$. The results are compared to predictions from models based on different assumptions about the nature of the diffractive exchange. △ Less

Submitted 17 December, 2015; v1 submitted 21 May, 2015; originally announced May 2015.

Comments: 36 pages, 18 figures

Report number: DESY-15-070

Further studies of the photoproduction of isolated photons with a jet at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, O. Arslan, V. Aushev, Y. Aushev, O. Bachynska, A. N. Barakbaev, N. Bartosik, O. Behnke, J. Behr, U. Behrens, A. Bertolin, S. Bhadra, I. Bloch, V. Bokhonov, E. G. Boos, K. Borras, I. Brock, R. Brugnera, A. Bruni , et al. (148 additional authors not shown)

Abstract: In this extended analysis using the ZEUS detector at HERA, the photoproduction of isolated photons together with a jet is measured for different ranges of the fractional photon energy, $x_γがんま^{\mathrm{meas}}$, contributing to the photon-jet final state. Cross sections are evaluated in the photon transverse-energy and pseudorapidity ranges $6 < E_T^γがんま < 15$ GeV and $-0.7 < ηいーた^γがんま < 0.9$, and for jet tran… ▽ More In this extended analysis using the ZEUS detector at HERA, the photoproduction of isolated photons together with a jet is measured for different ranges of the fractional photon energy, $x_γがんま^{\mathrm{meas}}$, contributing to the photon-jet final state. Cross sections are evaluated in the photon transverse-energy and pseudorapidity ranges $6 < E_T^γがんま < 15$ GeV and $-0.7 < ηいーた^γがんま < 0.9$, and for jet transverse-energy and pseudorapidity ranges $4 < E_T^{\rm jet} < 35$ GeV and $-1.5 < ηいーた^{\rm jet} < 1.8$, for an integrated luminosity of 374 $\mathrm{pb}^{-1}$. The kinematic observables studied comprise the transverse energy and pseudorapidity of the photon and the jet, the azimuthal difference between them, the fraction of proton energy taking part in the interaction, and the difference between the pseudorapidities of the photon and the jet. Higher-order theoretical calculations are compared to the results. △ Less

Submitted 12 September, 2014; v1 submitted 28 May, 2014; originally announced May 2014.

Comments: 26 pages, 7 figures. Updated with small corrections from journal referee and journal reference

Report number: DESY-14-086

Journal ref: JHEP 08 (2014) 23

Measurement of beauty and charm production in deep inelastic scattering at HERA and measurement of the beauty-quark mass

Authors: ZEUS collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, O. Arslan, V. Aushev, Y. Aushev, O. Bachynska, A. N. Barakbaev, N. Bartosik, O. Behnke, J. Behr, U. Behrens, A. Bertolin, S. Bhadra, I. Bloch, V. Bokhonov, E. G. Boos, K. Borras, I. Brock, R. Brugnera, A. Bruni , et al. (149 additional authors not shown)

Abstract: The production of beauty and charm quarks in ep interactions has been studied with the ZEUS detector at HERA for exchanged four-momentum squared 5 < Q^2 < 1000 GeV^2 using an integrated luminosity of 354 pb^{-1}. The beauty and charm content in events with at least one jet have been extracted using the invariant mass of charged tracks associated with secondary vertices and the decay-length signifi… ▽ More The production of beauty and charm quarks in ep interactions has been studied with the ZEUS detector at HERA for exchanged four-momentum squared 5 < Q^2 < 1000 GeV^2 using an integrated luminosity of 354 pb^{-1}. The beauty and charm content in events with at least one jet have been extracted using the invariant mass of charged tracks associated with secondary vertices and the decay-length significance of these vertices. Differential cross sections as a function of Q^2, Bjorken x, jet transverse energy and pseudorapidity were measured and compared with next-to-leading-order QCD calculations. The beauty and charm contributions to the proton structure functions were extracted from the double-differential cross section as a function of x and Q^2. The running beauty-quark mass, m_b at the scale m_b, was determined from a QCD fit at next-to-leading order to HERA data for the first time and found to be 4.07 \pm 0.14 (fit} ^{+0.01}_{-0.07} (mod.) ^{+0.05}_{-0.00} (param.) ^{+0.08}_{-0.05} (theo) GeV. △ Less

Submitted 21 October, 2014; v1 submitted 27 May, 2014; originally announced May 2014.

Comments: 63 pages, 14 figures, 20 tables. Version accepted by JHEP

Report number: DESY 14-083

Measurement of D* photoproduction at three different centre-of-mass energies at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, O. Arslan, V. Aushev, Y. Aushev, O. Bachynska, A. N. Barakbaev, N. Bartosik, O. Behnke, J. Behr, U. Behrens, A. Bertolin, S. Bhadra, I. Bloch, V. Bokhonov, E. G. Boos, K. Borras, I. Brock, R. Brugnera, A. Bruni , et al. (148 additional authors not shown)

Abstract: The photoproduction of $D^{*\pm}$ mesons has been measured with the ZEUS detector at HERA at three different ep centre-of-mass energies, $\sqrt{s}$, of 318, 251 and 225 GeV. For each data set, $D^*$ mesons were required to have transverse momentum, $p_T^{D^*}$, and pseudorapidity, $ηいーた^{D^*}$, in the ranges $1.9 < p_T^{D^*} < 20$ GeV and $|ηいーた^{D^*}|<1.6$. The events were required to have a virtuality… ▽ More The photoproduction of $D^{*\pm}$ mesons has been measured with the ZEUS detector at HERA at three different ep centre-of-mass energies, $\sqrt{s}$, of 318, 251 and 225 GeV. For each data set, $D^*$ mesons were required to have transverse momentum, $p_T^{D^*}$, and pseudorapidity, $ηいーた^{D^*}$, in the ranges $1.9 < p_T^{D^*} < 20$ GeV and $|ηいーた^{D^*}|<1.6$. The events were required to have a virtuality of the incoming photon, $Q^2$, of less than 1 GeV$^2$. The dependence on $\sqrt{s}$ was studied by normalising to the high-statistics measurement at $\sqrt{s} =318$ GeV. This led to the cancellation of a number of systematic effects both in data and theory. Predictions from next-to-leading-order QCD describe the $\sqrt{s}$ dependence of the data well. △ Less

Submitted 11 September, 2014; v1 submitted 20 May, 2014; originally announced May 2014.

Comments: 17 pages, 7 figures, accepted by JHEP. Updated version includes comments from journal referee

Report number: DESY-14-082

Deep inelastic cross-section measurements at large y with the ZEUS detector at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, O. Arslan, V. Aushev, Y. Aushev, O. Bachynska, A. N. Barakbaev, N. Bartosik, O. Behnke, J. Behr, U. Behrens, A. Bertolin, S. Bhadra, I. Bloch, V. Bokhonov, E. G. Boos, K. Borras, I. Brock, R. Brugnera, A. Bruni , et al. (148 additional authors not shown)

Abstract: The reduced cross sections for $e^{+}p$ deep inelastic scattering have been measured with the ZEUS detector at HERA at three different centre-of-mass energies, $318$, $251$ and $225$ GeV. The cross sections, measured double differentially in Bjorken $x$ and the virtuality, $Q^2$, were obtained in the region $0.13\ \leq\ y\ \leq\ 0.75$, where $y$ denotes the inelasticity and… ▽ More The reduced cross sections for $e^{+}p$ deep inelastic scattering have been measured with the ZEUS detector at HERA at three different centre-of-mass energies, $318$, $251$ and $225$ GeV. The cross sections, measured double differentially in Bjorken $x$ and the virtuality, $Q^2$, were obtained in the region $0.13\ \leq\ y\ \leq\ 0.75$, where $y$ denotes the inelasticity and $5\ \leq\ Q^2\ \leq\ 110$ GeV$^2$. The proton structure functions $F_2$ and $F_L$ were extracted from the measured cross sections. △ Less

Submitted 25 April, 2014; originally announced April 2014.

Comments: 39 pages, 9 figures. To be submitted to Phys. Lett

Report number: DESY-14-053

Journal ref: Phys. Rev. D 90, 072002 (2014)

Measurement of neutral current e+/-p cross sections at high Bjorken x with the ZEUS detector

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, O. Arslan, V. Aushev, Y. Aushev, O. Bachynska, A. N. Barakbaev, N. Bartosik, O. Behnke, J. Behr, U. Behrens, A. Bertolin, S. Bhadra, I. Bloch, V. Bokhonov, E. G. Boos, K. Borras, I. Brock, R. Brugnera, A. Bruni , et al. (148 additional authors not shown)

Abstract: The neutral current e+/-p cross section has been measured up to values of Bjorken x of approximately 1 with the ZEUS detector at HERA using an integrated luminosity of 187 inv. pb of e-p and 142 inv. pb of e+p collisions at sqrt(s) = 318GeV. Differential cross sections in x and Q2, the exchanged boson virtuality, are presented for Q2 geq 725GeV2. An improved reconstruction method and greatly incre… ▽ More The neutral current e+/-p cross section has been measured up to values of Bjorken x of approximately 1 with the ZEUS detector at HERA using an integrated luminosity of 187 inv. pb of e-p and 142 inv. pb of e+p collisions at sqrt(s) = 318GeV. Differential cross sections in x and Q2, the exchanged boson virtuality, are presented for Q2 geq 725GeV2. An improved reconstruction method and greatly increased amount of data allows a finer binning in the high-x region of the neutral current cross section and leads to a measurement with much improved precision compared to a similar earlier analysis. The measurements are compared to Standard Model expectations based on a variety of recent parton distribution functions. △ Less

Submitted 4 April, 2014; v1 submitted 16 December, 2013; originally announced December 2013.

Comments: 39 pages, 9 figures

Report number: DESY-13-245

Journal ref: Phys. Rev. D 89, 072007 (2014)

The HERMES Recoil Detector

Authors: A. Airapetian, E. C. Aschenauer, S. Belostotski, A. Borissov, A. Borisenko, J. Bowles, I. Brodski, V. Bryzgalov, J. Burns, G. P. Capitani, V. Carassiti, G. Ciullo, A. Clarkson, M. Contalbrigo, R. De Leo, E. De Sanctis, M. Diefenthaler, P. Di Nezza, M. Düren, M. Ehrenfried, H. Guler, I. M. Gregor, M. Hartig, G. Hill, M. Hoek , et al. (58 additional authors not shown)

Abstract: For the final running period of HERA, a recoil detector was installed at the HERMES experiment to improve measurements of hard exclusive processes in charged-lepton nucleon scattering. Here, deeply virtual Compton scattering is of particular interest as this process provides constraints on generalised parton distributions that give access to the total angular momenta of quarks within the nucleon.… ▽ More For the final running period of HERA, a recoil detector was installed at the HERMES experiment to improve measurements of hard exclusive processes in charged-lepton nucleon scattering. Here, deeply virtual Compton scattering is of particular interest as this process provides constraints on generalised parton distributions that give access to the total angular momenta of quarks within the nucleon. The HERMES recoil detector was designed to improve the selection of exclusive events by a direct measurement of the four-momentum of the recoiling particle. It consisted of three components: two layers of double-sided silicon strip sensors inside the HERA beam vacuum, a two-barrel scintillating fibre tracker, and a photon detector. All sub-detectors were located inside a solenoidal magnetic field with an integrated field strength of 1 T. The recoil detector was installed in late 2005. After the commissioning of all components was finished in September 2006, it operated stably until the end of data taking at HERA end of June 2007. The present paper gives a brief overview of the physics processes of interest and the general detector design. The recoil detector components, their calibration, the momentum reconstruction of charged particles, and the event selection are described in detail. The paper closes with a summary of the performance of the detection system. △ Less

Submitted 6 May, 2013; v1 submitted 25 February, 2013; originally announced February 2013.

Comments: 50 pages, 72 figures

Report number: DESY 13-034

Production of Z0 bosons in elastic and quasi-elastic ep collisions at HERA

Authors: ZEUS collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, O. Arslan, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, N. Bartosik, D. Bartsch, M. Basile, O. Behnke, J. Behr, U. Behrens , et al. (278 additional authors not shown)

Abstract: The production of Z0 bosons in the reaction ep -> eZ0p*, where p* stands for a proton or a low-mass nucleon resonance, has been studied in ep collisions at HERA using the ZEUS detector. The analysis is based on a data sample collected between 1996 and 2007, amounting to 496 pb-1 of integrated luminosity. The Z0 was measured in the hadronic decay mode. The elasticity of the events was ensured by a… ▽ More The production of Z0 bosons in the reaction ep -> eZ0p*, where p* stands for a proton or a low-mass nucleon resonance, has been studied in ep collisions at HERA using the ZEUS detector. The analysis is based on a data sample collected between 1996 and 2007, amounting to 496 pb-1 of integrated luminosity. The Z0 was measured in the hadronic decay mode. The elasticity of the events was ensured by a cut on eta_max < 3.0, where eta_max is the maximum pseudorapidity of energy deposits in the calorimeter defined with respect to the proton beam direction. A signal was observed at the Z0 mass. The cross section of the reaction ep -> eZ0p* was measured to be sigma(ep -> eZ0p*) = 0.13 +/- 0.06 (stat.) +/- 0.01 (syst.) pb, in agreement with the Standard Model prediction of 0.16 pb. This is the first measurement of Z0 production in ep collisions. △ Less

Submitted 19 October, 2012; originally announced October 2012.

Comments: 13 pages, 3 figures, submitted to PLB

Report number: DESY-12-168

Measurement of high-Q2 neutral current deep inelastic e+p scattering cross sections with a longitudinally polarised positron beam at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, O. Arslan, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, N. Bartosik, D. Bartsch, M. Basile, O. Behnke, J. Behr, U. Behrens , et al. (278 additional authors not shown)

Abstract: Measurements of neutral current cross sections for deep inelastic scattering in e+p collisions at HERA with a longitudinally polarised positron beam are presented. The single-differential cross-sections d(sigma)/dQ2, d(sigma)/dx and d(sigma)/dy and the reduced cross-section were measured in the kinematic region Q2 > 185 GeV2 and y < 0.9, where Q2 is the four-momentum transfer squared, x the Bjorke… ▽ More Measurements of neutral current cross sections for deep inelastic scattering in e+p collisions at HERA with a longitudinally polarised positron beam are presented. The single-differential cross-sections d(sigma)/dQ2, d(sigma)/dx and d(sigma)/dy and the reduced cross-section were measured in the kinematic region Q2 > 185 GeV2 and y < 0.9, where Q2 is the four-momentum transfer squared, x the Bjorken scaling variable, and y the inelasticity of the interaction. The measurements were performed separately for positively and negatively polarised positron beams. The measurements are based on an integrated luminosity of 135.5 pb-1 collected with the ZEUS detector in 2006 and 2007 at a centre-of-mass energy of 318 GeV. The structure functions F3 and F3(gamma)Z were determined by combining the e+p results presented in this paper with previously published e-p neutral current results. The asymmetry parameter A+ is used to demonstrate the parity violation predicted in electroweak interactions. The measurements are well described by the predictions of the Standard Model. △ Less

Submitted 12 May, 2014; v1 submitted 30 August, 2012; originally announced August 2012.

Comments: 46 pages, 10 figures and 15 tables. Version updated after journal review and including full list of authors

Report number: DESY-12-145

Journal ref: Phys Rev D 87 (2013) 052014

Beam-helicity asymmetry arising from deeply virtual Compton scattering measured with kinematically complete event reconstruction

Authors: The HERMES Collaboration, A. Airapetian, N. Akopov, Z. Akopov, E. C. Aschenauer, W. Augustyniak, R. Avakian, A. Avetissian, E. Avetisyan, S. Belostotski, H. P. Blok, A. Borissov, J. Bowles, I. Brodski, V. Bryzgalov, J. Burns, M. Capiluppi, G. P. Capitani, E. Cisbani, G. Ciullo, M. Contalbrigo, P. F. Dalpiaz, W. Deconinck, R. De Leo, L. De Nardo , et al. (111 additional authors not shown)

Abstract: The beam-helicity asymmetry in exclusive electroproduction of real photons by the longitudinally polarized HERA positron beam scattering off an unpolarized hydrogen target is measured at HERMES. The asymmetry arises from deeply virtual Compton scattering and its interference with the Bethe--Heitler process. Azimuthal amplitudes of the beam-helicity asymmetry are extracted from a data sample consis… ▽ More The beam-helicity asymmetry in exclusive electroproduction of real photons by the longitudinally polarized HERA positron beam scattering off an unpolarized hydrogen target is measured at HERMES. The asymmetry arises from deeply virtual Compton scattering and its interference with the Bethe--Heitler process. Azimuthal amplitudes of the beam-helicity asymmetry are extracted from a data sample consisting of $ep\rightarrow epγがんま$ events with detection of all particles in the final state including the recoiling proton. The installation of a recoil detector, while reducing the acceptance of the experiment, allows the elimination of background from $ep\rightarrow eNπぱいγがんま$ events, which was estimated to contribute an average of about 12% to the signal in previous HERMES publications. The removal of this background from the present data sample is shown to increase the magnitude of the leading asymmetry amplitude by 0.054 +/- 0.016 to -0.328 +/- 0.027 (stat.) +/- 0.045 (syst.). △ Less

Submitted 28 November, 2012; v1 submitted 25 June, 2012; originally announced June 2012.

Report number: DESY 12-095

Inclusive-jet photoproduction at HERA and determination of alphas

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, N. Bartosik, D. Bartsch, M. Basile, O. Behnke, J. Behr, U. Behrens, L. Bellagamba , et al. (281 additional authors not shown)

Abstract: Inclusive-jet cross sections have been measured in the reaction ep->e+jet+X for photon virtuality Q2 < 1 GeV2 and gamma-p centre-of-mass energies in the region 142 < W(gamma-p) < 293 GeV with the ZEUS detector at HERA using an integrated luminosity of 300 pb-1. Jets were identified using the kT, anti-kT or SIScone jet algorithms in the laboratory frame. Single-differential cross sections are prese… ▽ More Inclusive-jet cross sections have been measured in the reaction ep->e+jet+X for photon virtuality Q2 < 1 GeV2 and gamma-p centre-of-mass energies in the region 142 < W(gamma-p) < 293 GeV with the ZEUS detector at HERA using an integrated luminosity of 300 pb-1. Jets were identified using the kT, anti-kT or SIScone jet algorithms in the laboratory frame. Single-differential cross sections are presented as functions of the jet transverse energy, ETjet, and pseudorapidity, etajet, for jets with ETjet > 17 GeV and -1 < etajet < 2.5. In addition, measurements of double-differential inclusive-jet cross sections are presented as functions of ETjet in different regions of etajet. Next-to-leading-order QCD calculations give a good description of the measurements, except for jets with low ETjet and high etajet. The influence of non-perturbative effects not related to hadronisation was studied. Measurements of the ratios of cross sections using different jet algorithms are also presented; the measured ratios are well described by calculations including up to O(alphas2) terms. Values of alphas(Mz) were extracted from the measurements and the energy-scale dependence of the coupling was determined. The value of alphas(Mz) extracted from the measurements based on the kT jet algorithm is alphas(Mz) = 0.1206 +0.0023 -0.0022 (exp.) +0.0042 -0.0035 (th.); the results from the anti-kT and SIScone algorithms are compatible with this value and have a similar precision. △ Less

Submitted 28 May, 2012; originally announced May 2012.

Comments: 53 pages, 17 figures

Report number: DESY-12-045

Development of Single- and Double-sided Ladders for the ILD Vertex Detectors

Authors: Jerome Baudot, Olena Bashinska, Nathalie Chon-Sen, Wojciech Dulinski, Franziska Hegner, Marie Gelin-Galibel, Rhorry Gauld, Mathieu Goffe, Joel Goldstein, Ingrid Gregor, Christine Hu-Guo, Ulrich Koetz, Andrei Nomerotski, Marc Winter

Abstract: We discuss two projects exploring the integration of thin CMOS pixel sensors in order to prototype ladders matching the geometry needed for the ILD vertex detector. The PLUME project has designed and fabricated full-size and fully functional double- sided layers which currently reach 0.6 % X0 and aim for 0.3 % X0 in mid-2012. Another approach, SERNWIETE, consists in wrapping the sensors in a polyi… ▽ More We discuss two projects exploring the integration of thin CMOS pixel sensors in order to prototype ladders matching the geometry needed for the ILD vertex detector. The PLUME project has designed and fabricated full-size and fully functional double- sided layers which currently reach 0.6 % X0 and aim for 0.3 % X0 in mid-2012. Another approach, SERNWIETE, consists in wrapping the sensors in a polyimide-based micro-cable to obtain a supportless single-sided ladder with a material budget around 0.15 % X0. First promising samples have been produced and the full-size prototype is expected in spring 2012. △ Less

Submitted 23 March, 2012; v1 submitted 16 March, 2012; originally announced March 2012.

Comments: International Workshop on Future Linear Colliders, LCWS 2011, Granada, Spain, 2011, 26-30 September

Infrastructure for Detector Research and Development towards the International Linear Collider

Authors: J. Aguilar, P. Ambalathankandy, T. Fiutowski, M. Idzik, Sz. Kulis, D. Przyborowski, K. Swientek, A. Bamberger, M. Köhli, M. Lupberger, U. Renz, M. Schumacher, Andreas Zwerger, A. Calderone, D. G. Cussans, H. F. Heath, S. Mandry, R. F. Page, J. J. Velthuis, D. Attié, D. Calvet, P. Colas, X. Coppolani, Y. Degerli, E. Delagnes , et al. (252 additional authors not shown)

Abstract: The EUDET-project was launched to create an infrastructure for developing and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infras… ▽ More The EUDET-project was launched to create an infrastructure for developing and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infrastructures for tracking detectors as well as for calorimetry. △ Less

Submitted 23 January, 2012; originally announced January 2012.

Comments: 54 pages, 48 pictures

Exclusive electroproduction of two pions at HERA

Authors: ZEUS collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, D. Ashery, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, N. Bartosik, D. Bartsch, M. Basile, O. Behnke, J. Behr, U. Behrens , et al. (280 additional authors not shown)

Abstract: The exclusive electroproduction of two pions in the mass range 0.4 < Mπぱいπぱい < 2.5 GeV has been studied with the ZEUS detector at HERA using an integrated luminosity of 82 pb-1. The analysis was carried out in the kinematic range of 2 < Q2 < 80 GeV2, 32 < W < 180 GeV and |t| < 0.6 GeV2, where Q2 is the photon virtuality, W is the photon-proton centre-of-mass energy and t is the squared four-momentum t… ▽ More The exclusive electroproduction of two pions in the mass range 0.4 < Mπぱいπぱい < 2.5 GeV has been studied with the ZEUS detector at HERA using an integrated luminosity of 82 pb-1. The analysis was carried out in the kinematic range of 2 < Q2 < 80 GeV2, 32 < W < 180 GeV and |t| < 0.6 GeV2, where Q2 is the photon virtuality, W is the photon-proton centre-of-mass energy and t is the squared four-momentum transfer at the proton vertex. The two-pion invariant-mass distribution is interpreted in terms of the pion electromagnetic form factor, |F(Mπぱいπぱい)|, assuming that the studied mass range includes the contributions of the ρろー, ρろー' and ρろー" vector-meson states. The masses and widths of the resonances were obtained and the Q2 dependence of the cross-section ratios σしぐま(ρろー' \rightarrow πぱいπぱい)/σしぐま(ρろー) and σしぐま(ρろー" \rightarrow πぱいπぱい)/σしぐま(ρろー) was extracted. The pion form factor obtained in the present analysis is compared to that obtained in e+e- \rightarrow πぱい+πぱい-. △ Less

Submitted 21 November, 2011; originally announced November 2011.

Comments: 24 pages, including 11 figures

Report number: DESY-11-220

Search for single-top production in ep collisions at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, N. Bartosik, D. Bartsch, M. Basile, O. Behnke, J. Behr, U . Behrens, L. Bellagamba , et al. (278 additional authors not shown)

Abstract: A search for single-top production, $ep \rightarrow etX$, has been performed with the ZEUS detector at HERA using data corresponding to an integrated luminosity of $0.37\fbi$. No evidence for top production was found, consistent with the expectation from the Standard Model. Limits were computed for single-top production via flavour changing neutral current transitions. The result was combined with… ▽ More A search for single-top production, $ep \rightarrow etX$, has been performed with the ZEUS detector at HERA using data corresponding to an integrated luminosity of $0.37\fbi$. No evidence for top production was found, consistent with the expectation from the Standard Model. Limits were computed for single-top production via flavour changing neutral current transitions. The result was combined with a previous ZEUS result yielding a total luminosity of 0.50fb-1. A 95% credibility level upper limit of 0.13 pb was obtained for the cross section at the centre-of-mass energy of $\sqrt{s}=315\gev$. △ Less

Submitted 4 February, 2012; v1 submitted 16 November, 2011; originally announced November 2011.

Comments: Included approximate NLO and NNLO corrections to the cross section calculation used to derive coupling limit for the top production mediated by gamma exchange. 30 pages, 5 figures, 3 tables. Published in Phys. Lett. B 708 (2012) 27

Report number: DESY-11-204

Journal ref: Phys. Lett. B 708 (2012) 27-36

Scaled momentum distributions for K0s and Lambda/bar Lambda in DIS at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, N. Bartosik, D. Bartsch, M. Basile, O. Behnke, J. Behr, U. Behrens, L. Bellagamba , et al. (278 additional authors not shown)

Abstract: Scaled momentum distributions for the strange hadrons K0s and Lambda/bar Lambda were measured in deep inelastic ep scattering with the ZEUS detector at HERA using an integrated luminosity of 330 pb-1. The evolution of these distributions with the photon virtuality, Q2, was studied in the kinematic region 10<Q2<40000 GeV2 and 0.001<x<0.75, where x is the Bjorken scaling variable. Clear scaling viol… ▽ More Scaled momentum distributions for the strange hadrons K0s and Lambda/bar Lambda were measured in deep inelastic ep scattering with the ZEUS detector at HERA using an integrated luminosity of 330 pb-1. The evolution of these distributions with the photon virtuality, Q2, was studied in the kinematic region 10<Q2<40000 GeV2 and 0.001<x<0.75, where x is the Bjorken scaling variable. Clear scaling violations are observed. Predictions based on different approaches to fragmentation were compared to the measurements. Leading-logarithm parton-shower Monte Carlo calculations interfaced to the Lund string fragmentation model describe the data reasonably well in the whole range measured. Next-to-leading-order QCD calculations based on fragmentation functions, FFs, extracted from e+e- data alone, fail to describe the measurements. The calculations based on FFs extracted from a global analysis including e+e-, ep and pp data give an improved description. The measurements presented in this paper have the potential to further constrain the FFs of quarks, anti-quarks and gluons yielding K0s and Lambda/bar Lambda strange hadrons. △ Less

Submitted 19 April, 2012; v1 submitted 15 November, 2011; originally announced November 2011.

Comments: 34 pages, 8 figures

Report number: DESY-11-205

Measurement of the t dependence in exclusive photoproduction of Upsilon(1S) mesons at HERA

Authors: ZEUS collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, N. Bartosik, D. Bartsch, M. Basile, O. Behnke, J. Behr, U. Behrens, L. Bellagamba , et al. (278 additional authors not shown)

Abstract: The exclusive photoproduction reaction gamma p -> Upsilon(1S) p has been studied with the ZEUS detector in ep collisions at HERA using an integrated luminosity of 468 pb^-1. The measurement covers the kinematic range 60<W<220 GeV and Q^2<1 GeV^2, where W is the photon-proton centre-of-mass energy and Q^2 is the photon virtuality. The exponential slope, b, of the t dependence of the cross section,… ▽ More The exclusive photoproduction reaction gamma p -> Upsilon(1S) p has been studied with the ZEUS detector in ep collisions at HERA using an integrated luminosity of 468 pb^-1. The measurement covers the kinematic range 60<W<220 GeV and Q^2<1 GeV^2, where W is the photon-proton centre-of-mass energy and Q^2 is the photon virtuality. The exponential slope, b, of the t dependence of the cross section, where t is the squared four-momentum transfer at the proton vertex, has been measured, yielding b = 4.3 +2.0 -1.3 (stat.) +0.5 -0.6 (syst.) GeV^-2. This constitutes the first measurement of the t dependence of the gamma p -> Upsilon(1S) p cross section. △ Less

Submitted 4 February, 2012; v1 submitted 9 November, 2011; originally announced November 2011.

Comments: 15 pages, 4 figures; http://dx.doi.org/10.1016/j.physletb.2012.01.009

Report number: DESY-11-186

Journal ref: Physics Letters B 708 (2012) 14-20

Measurement of heavy-quark jet photoproduction at HERA

Authors: ZEUS Collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, N. Bartosik, D. Bartsch, M. Basile, O. Behnke, J. Behr, U. Behrens, L. Bellagamba , et al. (287 additional authors not shown)

Abstract: Photoproduction of beauty and charm quarks in events with at least two jets has been measured with the ZEUS detector at HERA using an integrated luminosity of 133 $pb^{-1}$. The fractions of jets containing b and c quarks were extracted using the invariant mass of charged tracks associated with secondary vertices and the decay-length significance of these vertices. Differential cross sections as a… ▽ More Photoproduction of beauty and charm quarks in events with at least two jets has been measured with the ZEUS detector at HERA using an integrated luminosity of 133 $pb^{-1}$. The fractions of jets containing b and c quarks were extracted using the invariant mass of charged tracks associated with secondary vertices and the decay-length significance of these vertices. Differential cross sections as a function of jet transverse momentum, $p_{T}^{\text{jet}}$, and pseudorapidity, $ηいーた^{\text{jet}}$, were measured. The data are compared with previous measurements and are well described by next-to-leading-order QCD predictions. △ Less

Submitted 28 April, 2011; originally announced April 2011.

Comments: 35 pages, 9 figures, 3 tables

Report number: DESY-11-067

Journal ref: Eur.Phys.J.C71:1659,2011

Measurement of beauty production in deep inelastic scattering at HERA using decays into electrons

Authors: ZEUS collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, N. Bartosik, D. Bartsch, M. Basile, O. Behnke, J. Behr, U. Behrens, L. Bellagamba , et al. (289 additional authors not shown)

Abstract: The production of beauty quarks in ep interactions has been studied with the ZEUS detector at HERA for exchanged four-momentum squared Q^2 > 10 GeV^2, using an integrated luminosity of 363 pb^{-1}. The beauty events were identified using electrons from semileptonic b decays with a transverse momentum 0.9 < p_T^e < 8 GeV and pseudorapidity |eta^e| < 1.5. Cross sections for beauty production were me… ▽ More The production of beauty quarks in ep interactions has been studied with the ZEUS detector at HERA for exchanged four-momentum squared Q^2 > 10 GeV^2, using an integrated luminosity of 363 pb^{-1}. The beauty events were identified using electrons from semileptonic b decays with a transverse momentum 0.9 < p_T^e < 8 GeV and pseudorapidity |eta^e| < 1.5. Cross sections for beauty production were measured and compared with next-to-leading-order QCD calculations. The beauty contribution to the proton structure function F_2 was extracted from the double-differential cross section as a function of Bjorken-x and Q^2. △ Less

Submitted 10 March, 2011; v1 submitted 19 January, 2011; originally announced January 2011.

Comments: 34 pages, 8 figures, 4 tables. Version published in EPJ C

Report number: DESY-11-005

Journal ref: Eur.Phys.J.C71:1573,2011

Measurement of beauty production in DIS and F_2^bbbar extraction at ZEUS

Authors: ZEUS collaboration, H. Abramowicz, I. Abt, L. Adamczyk, M. Adamus, R. Aggarwal, S. Antonelli, P. Antonioli, A. Antonov, M. Arneodo, V. Aushev, Y. Aushev, O. Bachynska, A. Bamberger, A. N. Barakbaev, G. Barbagli, G. Bari, F. Barreiro, D. Bartsch, M. Basile, O. Behnke, J. Behr, U. Behrens, L. Bellagamba, A. Bertolin , et al. (289 additional authors not shown)

Abstract: Beauty production in deep inelastic scattering with events in which a muon and a jet are observed in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb^-1. The fraction of events with beauty quarks in the data was determined using the distribution of the transverse momentum of the muon relative to the jet. The cross section for beauty producti… ▽ More Beauty production in deep inelastic scattering with events in which a muon and a jet are observed in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb^-1. The fraction of events with beauty quarks in the data was determined using the distribution of the transverse momentum of the muon relative to the jet. The cross section for beauty production was measured in the kinematic range of photon virtuality, Q^2 > 2 Gev^2, and inelasticity, 0.05 < y < 0.7, with the requirement of a muon and a jet. Total and differential cross sections are presented and compared to QCD predictions. The beauty contribution to the structure function F_2 was extracted and is compared to theoretical predictions. △ Less

Submitted 19 May, 2010; originally announced May 2010.

Comments: 24 pages, 5 figures

Report number: DESY-10-047

Journal ref: Eur.Phys.J.C69:347-360,2010

Test Beam Requirements for the ILC Tracking and Vertex Detectors

Authors: Ingrid-Maria Gregor

Abstract: In this report the test beam requirements for the vertex detector and the tracking detector for ILC are discussed. It focuses on the infrastructure needs of the different subsystems. In the second part of this summary the ideas about future infrastructure above the immediate needs are summarised. In this report the test beam requirements for the vertex detector and the tracking detector for ILC are discussed. It focuses on the infrastructure needs of the different subsystems. In the second part of this summary the ideas about future infrastructure above the immediate needs are summarised. △ Less

Submitted 15 January, 2009; originally announced January 2009.

Summary of One Year Operation of the EUDET CMOS Pixel Telescope

Authors: Ingrid-Maria Gregor

Abstract: Within the EUDET consortium a high resolution pixel beam telescope is being developed. The telescope consists of up to six planes of monolithic active pixel sensors. A flexible data acquisition environment is available for the telescope and the system is equipped with all the required infrastructure. Since the first installation of a demonstrator telescope in 2007, it has been extensively tested… ▽ More Within the EUDET consortium a high resolution pixel beam telescope is being developed. The telescope consists of up to six planes of monolithic active pixel sensors. A flexible data acquisition environment is available for the telescope and the system is equipped with all the required infrastructure. Since the first installation of a demonstrator telescope in 2007, it has been extensively tested and used by various detector R&D groups. The results of test beam measurements are described here, demonstrating the telescope performance. △ Less

Submitted 6 January, 2009; originally announced January 2009.

Comments: LCWS08 conference

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

Authors: The ATLAS Collaboration, G. Aad, E. Abat, B. Abbott, J. Abdallah, A. A. Abdelalim, A. Abdesselam, O. Abdinov, B. Abi, M. Abolins, H. Abramowicz, B. S. Acharya, D. L. Adams, T. N. Addy, C. Adorisio, P. Adragna, T. Adye, J. A. Aguilar-Saavedra, M. Aharrouche, S. P. Ahlen, F. Ahles, A. Ahmad, H. Ahmed, G. Aielli, T. Akdogan , et al. (2587 additional authors not shown)

Abstract: A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on… ▽ More A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN. △ Less

Submitted 14 August, 2009; v1 submitted 28 December, 2008; originally announced January 2009.